dahdi-tools/doc/dahdi_test.8

50 lines
1.2 KiB
Groff

.TH dahdi_test 8 "2005-06-25"
.SH "NAME"
dahdi_test \(em Test if the DAHDI timer provides timely response
.SH "SYNOPSIS"
.B dahdi_test
.I [ \-v ]
.SH DESCRIPTION
.B dahdi_test
dahdi_test runs a timing test in a loop and prints the result of each loop.
The test is as follows:
It reads 8192 bytes from the DAHDI timer device (\fI/dev/dahdi/pseudo\fR).
This should take exactly 8000 ms . It uses calls to
.I gettimeofday(2)
before and after that read to check that indeed exactly 8000ms have passed.
Values of 100% and 99.99% Are normally considered a definite
.I pass.
Values of 99.98% and 99.97% are probably OK as well.
.SH OPTIONS
.B \-v
.RS
Be more verbose: print one line per test.
.RE
.B \-c
.I count
.RS
Run for
.I count
times instead of running forever.
.RE
.SH FILES
.B /dev/dahdi/pseudo
.RS
.RE
The device file used to access the DAHDI timer.
.SH SEE ALSO
dahdi_tool(8), dahdi_cfg(8), asterisk(8). gettimeofday(2)
.SH AUTHOR
This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Permission is granted to copy, distribute and/or modify this document under
the terms of the GNU General Public License, Version 2 any
later version published by the Free Software Foundation.