From f64500c98647a7900e2a1f31a8c417e825adaff3 Mon Sep 17 00:00:00 2001 From: Tzafrir Cohen Date: Wed, 22 Feb 2017 12:15:22 +0200 Subject: [PATCH] xpp: run xpp_sync when an Astribank is connected This was originally done in the init script after all Astribanks were connected. But now there is no single point in the startup sequence where we can guarantee all of them were loaded. Signed-off-by: Tzafrir Cohen --- hotplug/handle_device.d/30-xpp-sync | 18 ++++++++++++++++++ xpp/README.Astribank | 4 ++-- 2 files changed, 20 insertions(+), 2 deletions(-) create mode 100755 hotplug/handle_device.d/30-xpp-sync diff --git a/hotplug/handle_device.d/30-xpp-sync b/hotplug/handle_device.d/30-xpp-sync new file mode 100755 index 0000000..005c4b0 --- /dev/null +++ b/hotplug/handle_device.d/30-xpp-sync @@ -0,0 +1,18 @@ +#! /bin/sh + +# Run xpp_sync whenever an Astribank is connected. + +# May be set in /etc/dahdi/init.conf +XPP_SYNC=${XPP_SYNC:-auto} + +case "$ACTION" in +add) ;; +*) exit 0 ;; +esac + +case "${DEVPATH##*/}" in +astribanks:*) ;; +*) exit 0 ;; +esac + +xpp_sync "$XPP_SYNC" diff --git a/xpp/README.Astribank b/xpp/README.Astribank index 2e0001f..e71bcb7 100644 --- a/xpp/README.Astribank +++ b/xpp/README.Astribank @@ -1257,8 +1257,8 @@ Astribanks Synchronization Source If there is more than one Astribank on the system, all the Astribanks keep their clock in sync. Optionally the Astribanks can synchronize their clock to the master DAHDI device (in case it is a different DAHDI -device). Normally you just use the default init.d script or run -explicitly: +device). Normally it would be run automatically from the udev hooks +run on device plug (handle_device), but you can also run it explicitly: xpp_sync auto