dahdi-tools/xpp/astribank_hook

240 lines
6.0 KiB
Plaintext
Raw Normal View History

#! /bin/sh
me=`basename $0`
dir=`dirname $0`
LOGGER="logger -i -t '$me'"
# Always redirect stderr somewhere, otherwise the shell script will die
# when it tries to do I/O related stuff on closed file descriptor.
# Our default is to throw it down the bit-bucket.
#exec 2> /dev/console
## If you wish to trace this script:
#exec 2> "/tmp/${me}_$XBUS_NAME" 1>&2
# Our directory in the beginning, so we can use local lab setup
PATH="$dir:/usr/sbin:/sbin:/usr/bin:/bin"
set -e
LOCK="/var/lock/twinstar_startup"
[ -r /etc/dahdi/init.conf ] && . /etc/dahdi/init.conf
# For lab testing
liveconf="$dir/liveconf/dahdi"
if [ -d "$liveconf" ]; then
dahdi_conf="$liveconf"
else
dahdi_conf="/etc/dahdi"
fi
if [ "$XPP_HOTPLUG_DAHDI" != yes ]; then
exit 0
fi
export XPPORDER_CONF="$dahdi_conf/xpp_order"
export DAHDI_CFG_CMD="dahdi_cfg -c $dahdi_conf/system.conf"
export CALLED_FROM_ATRIBANK_HOOK=yes
can_full_async() {
# Can we work aynchronously:
# - Need modern Asterisk that accept hotplug DAHDI devices.
# - Need DAHDI with "auto_assign_spans" == 0
if [ "$ASTERISK_SUPPORTS_DAHDI_HOTPLUG" = yes ]; then
aas_param='/sys/module/dahdi/parameters/auto_assign_spans'
aas=`cat "$aas_param" 2>/dev/null`
if [ "$aas" = 0 ]; then
return 0
else
$LOGGER "No async operation ($aas_param != 0)"
fi
else
$LOGGER "No async operation (ASTERISK_SUPPORTS_DAHDI_HOTPLUG!=yes)"
fi
return 1
}
check_xpporder_conf() {
if [ ! -r "$XPPORDER_CONF" ]; then
(
echo "Skip($ACTION): No '$XPPORDER_CONF'"
echo "Removing uneeded startup semaphore"
astribank_is_starting -v -r 2>&1
) 2>&1 | $LOGGER
exit 0
fi
}
clean_lines() {
sed -e 's/#.*//' -e 'y/\t/ /' -e 's/^ *//' -e 's/ *$//' -e '$s/$/\n/' "$XPPORDER_CONF"
}
matched_devices() {
ready=`grep -H READY /sys/bus/astribanks/devices/*/xbus_state | sed 's,/xbus_state.*,,'`
for dev in $ready
do
label=`cat "$dev/label"`
connector=`cat "$dev/connector"`
xbus=`echo "$dev" | sed 's,.*/,,'`
lineno=`clean_lines | egrep -n "^${label}$|^@${connector}$" | cut -d: -f1`
if [ "$lineno" != "" ]; then
#echo "$xbus: $XPPORDER_CONF:$lineno -- Match ${label} @${connector}" | $LOGGER
printf "${xbus}\t${label}\n"
else
echo "${xbus}: ${label} @${connector} not found in $XPPORDER_CONF: Ignore($ACTION)" | $LOGGER
fi
done
}
# Wait until udev finished processing our requests
# so we know the device files were actually created
# before trying dahdi_cfg et-al.
wait_for_udev() {
UDEV_SETTLE_MAX_TIME=10
echo "Waiting for udev to settle down..."
udevsettle_cmd=
if [ -x /bin/udevadm ]; then
udevsettle_cmd="/bin/udevadm settle"
elif [ -x /sbin/udevadm ]; then
udevsettle_cmd="/sbin/udevadm settle"
elif [ -x /sbin/udevsettle ]; then
udevsettle_cmd="/sbin/udevsettle"
else
echo "No udevsettle/udevadm."
echo "Fallback to sleep $UDEV_SETTLE_MAX_TIME seconds."
sleep "$UDEV_SETTLE_MAX_TIME"
return
fi
if ! $udevsettle_cmd --timeout="$UDEV_SETTLE_MAX_TIME"
then
echo "udevadm failed ($?)."
echo "Fallback to sleep $UDEV_SETTLE_MAX_TIME seconds."
sleep "$UDEV_SETTLE_MAX_TIME"
fi
sleep 1 # Wait a bit more (races)
}
start_dahdi() {
wait_for_udev
script=/etc/init.d/dahdi
echo "Starting $script."
"$script" start | logger -i -t "$script"
status=$?
echo "Status($script): $status"
if [ -x "$dir/twinstar_hook" ]; then
"$dir/twinstar_hook"
fi
# Finished astribanks
echo "Removing semaphore"
astribank_is_starting -v -r
rm -f "$LOCK"
}
old_synchronous_start() {
NUM_GOOD=`matched_devices | wc -l`
NUM_WANTED=`clean_lines | sed '/^$/d' | wc -l`
echo "$ACTION($XBUS_NAME): $NUM_GOOD/$NUM_WANTED from $XPPORDER_CONF" | $LOGGER
if [ "$NUM_GOOD" -eq "$NUM_WANTED" ]; then
(
# Delay the initialization of the Astribank until the filesystem
# is mounted read-write:
test_file="/var/lock/astribank_test_file"
for i in `seq 1 20`; do
if touch $test_file 2> /dev/null; then
rm -f $test_file
break
else
echo "$0: [$i] - Failed writing '$test_file'...waiting" | $LOGGER
sleep 1;
fi
done
if ln -s "$XBUS_NAME" "$LOCK"; then
echo "START-DAHDI: Total $NUM_GOOD online." | $LOGGER
# Fork services
start_dahdi < /dev/null 2>&1 | $LOGGER
else
echo "$0: Was started: $(ls -l $LOCK)" | $LOGGER
fi
) < /dev/null 2>&1 | $LOGGER &
fi
}
old_synchronous_stop() {
NUM_GOOD=`matched_devices | wc -l`
NUM_WANTED=`clean_lines | sed '/^$/d' | wc -l`
echo "$ACTION($XBUS_NAME): $NUM_GOOD/$NUM_WANTED from $XPPORDER_CONF" | $LOGGER
if [ "$NUM_GOOD" -eq 0 ]; then
echo "All Astribanks offline" | $LOGGER
if [ -x "$dir/twinstar_hook" ]; then
"$dir/twinstar_hook" || :
fi
rm -f "$LOCK"
fi
}
ab_list() {
find /sys/devices -name idVendor 2>/dev/null | \
xargs grep -H 'e4e4' 2>/dev/null | \
sed -e 's/idVendor.*/idProduct/' | xargs grep -H '11[3456]' | \
sed 's,/[^/]*$,,' || :
}
tws_watchdog_enable() {
devdir="/sys$DEVPATH"
label=`cat "$devdir/label"`
connector=`cat "$devdir/connector"`
xbus=`echo "$devdir" | sed 's,.*/,,'`
prefix="${xbus}: [${label}] @${connector}"
TWS_NOAUTOJUMPFILE="$TWS_DIR/twinstar_no_autojump"
if [ -e "$TWS_NOAUTOJUMPFILE" ]; then
$LOGGER "$prefix: ignore wd (found $TWS_NOAUTOJUMPFILE)"
else
# Re-arm Astribank watchdog
transportdir="$devdir/transport"
busnum=`cat "$transportdir/busnum" 2>/dev/null || :`
devnum=`cat "$transportdir/devnum" 2>/dev/null || :`
devaddr=`printf "%03d/%03d" "$busnum" "$devnum"`
$LOGGER "$prefix: enabling twinstar watchdog"
astribank_tool -D "$devaddr" -w 1 2>&1 | $LOGGER
fi
}
#echo "$0: $ACTION($XBUS_NAME)" | $LOGGER
case "$ACTION" in
add)
;;
remove)
ab=`ab_list | wc -l`
if [ "$ab" -eq 0 ]; then
$LOGGER "$prefix: No more Astribanks -- remove astribank_is_starting semaphore"
astribank_is_starting -v -r 2>&1 | $LOGGER
fi
;;
online)
if can_full_async; then
tws_watchdog_enable
else
old_synchronous_start
fi
;;
offline)
if can_full_async; then
: # Nothing to do
else
old_synchronous_stop
fi
;;
*)
echo "$0: Unknown ACTION='$ACTION'" | $LOGGER
echo "$0: ARGS='$*'" | $LOGGER
echo "$0: ENV:" | $LOGGER
env | $LOGGER
exit 1
esac