251 lines
10 KiB
Plaintext
251 lines
10 KiB
Plaintext
CHANGES
|
||
=======
|
||
|
||
HEAD
|
||
------------------
|
||
|
||
|
||
chan_capi-1.1.2
|
||
------------------
|
||
- added config setting 'faxdetecttime' to limit the fax detection for a given amount of seconds.
|
||
- added config option for subscriber prefix. Some lines may show local calls without area code
|
||
signaled as subscriber-number. Here the complete prefix including area code must be added.
|
||
- better counting of active b-channels.
|
||
- make capicommand(progress) "early-B3" usable for non NT-mode incoming channels too.
|
||
- support early Line-Interconnect (bridge) as soon as both b-channels are up. This bridges b-channels
|
||
from beginning of call-establishment, even before calls are connected and the bridge command is received.
|
||
Dial() option 'G' is used to activate this feature.
|
||
- fixed big-endian issue for DATA_B3 messages in internal libcapi code.
|
||
- fixed NULL-pointer when no digits are signaled in DID mode.
|
||
- adapt to new Asterisk 1.6.1 changes.
|
||
- added capicommand to set CAPI application id into an Asterisk dialplan variable.
|
||
|
||
|
||
chan_capi-1.1.1
|
||
------------------
|
||
- fixed controller count when creating NULL-PLCI interface.
|
||
- simplified check for unused controller.
|
||
|
||
|
||
chan_capi-1.1.0
|
||
------------------
|
||
- send local DATE/TIME with CONNECT when in NT-mode.
|
||
- added transfergroup config option to set controllers allowed for transfer.
|
||
- send Sending-Complete if overlap dialing is not used.
|
||
- fixed numberingplan for 'connected number'.
|
||
- added devicestate option.
|
||
- capi-chat can play music-on-hold for first caller.
|
||
- adapt to new asterisk 1.6 API
|
||
- fixed reading capi profile on big-endian
|
||
- increased maximum number of CAPI controllers to 64 (needed for big PBX).
|
||
- if immedіate=yes is set in DID mode, accept calls to empty DNID (needed for Austrian lines).
|
||
- use own libcapi20 implementation by default (no library for capi is needed any more).
|
||
|
||
chan_capi-1.0.2
|
||
------------------
|
||
- possibly fixed ECT channel hang
|
||
- added 'x' option to capicommand(ect) to have real 'explicit call transfer'
|
||
(needed by some ISDN lines)
|
||
- support CCBS (call completion on busy subscriber)
|
||
- added capicommand(chat) for CAPI based MeetMe/Conference using onboard DSPs.
|
||
- fixed ton-display in 'show capi channels' on outgoing line.
|
||
- fix for 64bit support
|
||
- Asterisk 1.4.4 adaptions
|
||
- send 'In-band info available' for progress in NT-mode
|
||
- detect KEYPAD digits in NT-mode and send call to 'K...' extension
|
||
- fixed possible deadlock when answering a just disconnected call
|
||
|
||
|
||
chan_capi-1.0.1
|
||
------------------
|
||
- added qsig caller-name patch by Mario Goegel
|
||
- recognise asterisk 1.4.1
|
||
- register at CAPI with needed maxLogicalConnections only
|
||
- don't send SELECT_B_PROTOCOL more than once
|
||
- don't send more DATA_B3 messages than allowed by CAPI_MAX_B3_BLOCKS
|
||
- added 'k' option to capi receivefax command for not deleting bad faxes
|
||
- added b-channel number to channel name for better identification
|
||
- added variable setting REDIRECTIONNUMBER on outgoing call
|
||
- fixed deadlock with ast_async_goto on fax tone detection
|
||
- listen to CAPI supplementary information
|
||
QSIG:
|
||
- added support for different qsig variants
|
||
- added support for rerouting informations on incoming calls
|
||
- added implementation of Simple Call Transfer
|
||
|
||
chan_capi-1.0.0
|
||
------------------
|
||
- Added preliminary handling of MANUFACTURER_IND.
|
||
- Check for fax connection when in receivefax mode before writing data
|
||
to file.
|
||
- Try to detect for generic jitter buffer patch
|
||
- Adapted to new Asterisk version 1.4 (Bug PR#20)
|
||
- Adapted to new ast_channel_alloc from asterisk trunk.
|
||
- Make capicommand(echocancel) setting non-permanent.
|
||
Setting is restored after hangup.
|
||
- Better check for asterisk version 1.4 BUG#23
|
||
- Added information and changed example for tx/rx gains.
|
||
- Read the channel frames during wait for fax finish.
|
||
- Added progress when in faxmode to wakeup asterisk-1.2.
|
||
(needed for e.g. auto-hangup on timeout)
|
||
- Don't error on invalid controller in capi.conf, just ignore it.
|
||
- Added 3PTY patch by Simon Peter.
|
||
- Allow echo-cancel even with old capi configuration bit for
|
||
echo-cancel.
|
||
- Fix compiler warnings.
|
||
- Fixed callerid on incoming call with Asterisk 1.4 (PR#25)
|
||
- Remove possible race condition in with hangup and DISCONNECT_IND.
|
||
- Rixed gain and echosquelch use according to transfercapability.
|
||
- Don't wait for DISCONNECT_B3_CONF in activehangup.
|
||
- Reset PLCI on DISCONNECT_IND to avoid race if asterisk is too slow
|
||
with hangup command.
|
||
- Added Asterisk 1.4 jitterbuffer usage.
|
||
- Fixed compiler warning with Asterisk 1.4.0
|
||
- Added music-on-hold on HOLD request for Asterisk 1.4
|
||
|
||
chan_capi-0.7.1
|
||
------------------
|
||
- Set FAXREASONTEXT to "OK" instead of empty string.
|
||
- Disconnect reason 0x3400 is treated as 'successful' in faxmode.
|
||
- use CIP speech as default if transfercapability is unkown.
|
||
- set correct channel/cdr status in fax mode too.
|
||
- Use correct interface to wait on for ECT facility.
|
||
|
||
chan_capi-0.7.0
|
||
------------------
|
||
- added amaflags
|
||
- added pickupgroup (internal pickup with pickupexten)
|
||
- added capicommand(sendfax)
|
||
- dropped compatiblity to versions before Asterisk-1.2.0
|
||
- added capicommand(echocancel)
|
||
- added CAPI RTP (Eicon DIVA Server cards can do that)
|
||
- added new cli 'capi show channels'
|
||
- a lot of fixes
|
||
|
||
chan_capi-cm-0.6.5
|
||
------------------
|
||
- fixed compilation with Asterisk 1.0.7
|
||
- fixed call deflect if number is longer
|
||
- removed function VANITYNUMBER, this does not belong into channel drivers
|
||
|
||
chan_capi-cm-0.6.4
|
||
------------------
|
||
- don't do echo-squelch or gain if transfercapability is non-voice
|
||
- fix deadlock when changing to fax mode
|
||
- better capi message handling
|
||
- removed double memset to zero
|
||
- use safer copy_string function
|
||
- removed unneeded lockB3q
|
||
- avoid capi message number zero
|
||
- added locking rules
|
||
- fix ECT (use implicit ECT)
|
||
- fixed setting language for each interface
|
||
- fix wait for b-channel to go down on ECT.
|
||
|
||
chan_capi-cm-0.6.3
|
||
------------------
|
||
- fixed buffer overflow in overlap dial
|
||
- remove some compiler warnings
|
||
|
||
chan_capi-cm-0.6.2
|
||
------------------
|
||
- set some info variables when receiving fax
|
||
- added language support
|
||
- prepared devicestate(hint) support
|
||
- don't change early-B3 setting on conf error for CONNECT_B3
|
||
- small fixes in Makefile targets (thanks to Karsten Keil)
|
||
- don't send audio to local exchange when in TE mode.
|
||
- fix missing CONF messages when no interface is found
|
||
- small transfercap and overlapdial fix
|
||
- don't forward DTMF if in NT-mode and the line is not connected yet.
|
||
- fixed line interconnect
|
||
- b-channel handling better
|
||
- NT mode progress
|
||
- removed deadlock in faxreceive.
|
||
- initialize variable ocid
|
||
- correct use of timeoutms in native bridge
|
||
- use more common defines for mutex_lock/unlock and _log()
|
||
- clean up and OpenPBX portability.
|
||
- adapted to latest asterisk bridge function prototype.
|
||
|
||
chan_capi-cm-0.6.1
|
||
------------------
|
||
- fixed setting of redirecting number rdnis instead of cid.
|
||
- allow setting a callerid in the dial() command without changing
|
||
the original channel callerid.
|
||
- added config 'defaultcid' to set a default caller id which will be
|
||
used if dial option 'd' is specified.
|
||
- moved ast_softhangup() out of interface lock
|
||
- use correct mutex_init call for interface lock
|
||
- when 'o' option is used for overlap dialing, don't send any digits
|
||
with the CONNECT_REQ. This gives better progress together with 'b'.
|
||
- create a pseudo channel for each interface for incoming signalling
|
||
without B-channel.
|
||
- added channel locks
|
||
- fixed capi init order (thanks to Hans Petter Selasky)
|
||
- fixed did handling
|
||
- set RDNIS if redirecting number was received.
|
||
- simplified call to ast_exists_extension()
|
||
- when check for valid extension, check the callerid as well
|
||
- changed call-waiting and deflect handling in CONNECT_IND
|
||
- use 'immediate' config in MSN mode, if pbx shall be started on
|
||
CONNECT_IND and shall not wait until SETUP/SENDING-COMPLETE was received.
|
||
Since info like REDIRECTINGNUMBER will come after CONNECT_IND, this may
|
||
be lost then. But for some drivers/telcos/pbx, this setting is needed.
|
||
- fix start of line interconnect in old mode.
|
||
- start early-b3 on PROCEEDING too.
|
||
- don't send audio data, if in fax receive mode
|
||
- disconnect on finished fax immediately
|
||
- don't run through gain list, if gain is 1.0.
|
||
- use correct A-law idle value.
|
||
- removed old example from capi.conf
|
||
|
||
chan_capi-cm-0.6
|
||
----------------
|
||
- added 'relaxdtmf'.
|
||
- more BSD compatibility
|
||
- correct PROGRESS handling
|
||
- start PBX on SETUP/SENDING-COMPLETE for PtP only.
|
||
- added verbose text for capi info/reason error messages.
|
||
- fixed echo-cancel setup structure
|
||
- use correct facility-selector for echo-cancel
|
||
- use capi.conf option 'echocancelold' for old facility-selector (6)
|
||
- changed isdnmode configuration from ptp/ptmp to msn/did
|
||
- added ntmode configuration
|
||
- added application capicommand() for CAPI based applications
|
||
(removed standalone applications)
|
||
- capicommand(RETRIEVE) can now be called from other channels
|
||
- support ISDN hold (holdtype in capi.conf)
|
||
- added HOLD/RETRIEVE for Asterisk indications.
|
||
- added custom function VANITYNUMBER to convert letters into digits.
|
||
- added CAPI Line Interconnect (native bridging)
|
||
- use variable CONNECTEDNUMBER on Answer().
|
||
- set variable REDIRECTINGNUMBER on incomming call if it was diverted.
|
||
- added variable REDIRECTREASON
|
||
- fixed unload
|
||
- removed obsolete thread mutex
|
||
- fixed dnid/exten/immediate handling on PtP.
|
||
- receive a fax via CAPI is now done with capicommand(receivefax|...) and added stationid...
|
||
- fixed call-deflection and moved this feature from separate application
|
||
to capicommand().
|
||
- added config option 'immediate' to start pbx if no dnid has been received yet.
|
||
- endian fixes
|
||
- compile fixes with newer Asterisk
|
||
- update channel name on did changes.
|
||
- support 'type of number' (numbering-plan).
|
||
- U-Law setting is now done in capi.conf instead of Makefile define.
|
||
- allow using interface name in Dial().
|
||
- on hangup, use hangupcause from other channel or from var PRI_CAUSE.
|
||
- improved DID handling on PtP connections.
|
||
- capi.conf structure changes: one own section for each interface,
|
||
no global 'interfaces' any more. Section name will be interface name.
|
||
- restructured module loading and init.
|
||
- dial string changed: parameters like 'b' not as part of number any more.
|
||
- send alert on alerting only (busy() and congestion() work now).
|
||
- better overlap sending (new parameter 'o' for dialstring to
|
||
send only the first two digits with CONNECT_REQ only, the remaining
|
||
digits and even digits following the dial() command, will be send
|
||
as INFO_REQ/Overlap).
|
||
- further fixups
|
||
|