retronetworking
/
chan-capi
mirror of https://github.com/MelwareDE/chan-capi
12
0
Fork 0
Code Issues Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '29b662a4b6'
${ noResults }
chan-capi/README.media

1301 lines
53 KiB
Raw Blame History

+===================================================================+
| Media control commands |
+===================================================================+
+-------------------------------------------------------------------+
| noisesuppressor |
+-------------------------------------------------------------------+
Description:
Noise Suppressor is used to activate or to deactivate suppression of ambient noise,
which can be used to remove noise from speech caused by fans, air cooling systems,
cars, trains, and other sources of ambient noises from speech.
Direction:
Applies to Rx path only.
In case of line interconnect, it can be activated for multiple parties.
Supported hardware:
Dialogic(R) Diva(R) 4PRI PCI, 2PRI PCI, 4PRI PCIe HS Media Board
Other Dialogic(R) Diva(R) Media Boards equipped with DSPs can use this
feature only together with RTP.
Syntax:
noisesuppressor,[yes|no]
Syntax example:
s,n,capicommand(noisesuppressor,yes)
s,n,capicommand(noisesuppressor,no)
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(noisesuppressor,yes)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(noisesuppressor,no)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
PBX Example:
/////////////////////////////////////////////////////////////////////
[macro-capinoisesuppressor]
exten => s,1,capicommand(noisesuppressor,yes)
[isdn-in]
exten => 12345,1,Progress()
exten => 12345,n,Set(TIMEOUT(digit)=1) ; Set Digit Timeout to 5 seconds
exten => 12345,n,Set(TIMEOUT(response)=5) ; Set Response Timeout to 10 seconds
exten => 12345,n,Playback(demo-enterkeywords,noanswer,us)
exten => 12345,n,Answer
exten => 12345,n,Wait(2)
exten => 12345,n,capicommand(noisesuppressor,yes)
exten => 12345,n,Dial(DIALOGICDIVA/ISDN1/100,10,M(capinoisesuppressor))
exten => 12345,n,Hangup()
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| clamping |
+-------------------------------------------------------------------+
Description:
Clamping is used to activate or to deactivate suppression
(removal from voice stream) of DTMF tones.
Direction:
Applies to Rx path only.
In case of line interconnect, it can be activated for multiple parties.
Supported hardware:
Requires one Dialogic(R) Diva(R) Media Board equipped with DSPs.
Syntax:
clamping,N
N - estimated duration of DTMF tones to be suppressed in ms
0 - deactivate clamping
1 ... 250 - activate clamping
Syntax example:
s,n,capicommand(clamping,100)
s,n,capicommand(clamping,0)
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(clamping,100)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(clamping,0)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
PBX Example:
/////////////////////////////////////////////////////////////////////
[macro-capiclamping]
exten => s,1,capicommand(clamping,100)
[isdn-in]
exten => 12345,1,Progress()
exten => 12345,n,Set(TIMEOUT(digit)=1) ; Set Digit Timeout to 5 seconds
exten => 12345,n,Set(TIMEOUT(response)=5) ; Set Response Timeout to 10 seconds
exten => 12345,n,Playback(demo-enterkeywords,noanswer,us)
exten => 12345,n,Answer
exten => 12345,n,Wait(2)
exten => 12345,n,capicommand(clamping,100)
exten => 12345,n,Dial(DIALOGICDIVA/ISDN1/100,10,M(capiclamping))
exten => 12345,n,Hangup()
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| rxagc |
+-------------------------------------------------------------------+
Description:
Used to activate or to deactivate Automatic Gain Control (AGC)
for Rx direction. AGC level is -6dBm.
Direction:
Applies to Rx path only.
In case of line interconnect, it can be activated for multiple parties.
Supported hardware:
Requires one Diva Media Board equipped with DSPs.
Syntax:
rxagc,[yes|no]
Syntax example:
s,n,capicommand(rxagc,yes)
s,n,capicommand(rxagc,no)
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(rxagc,yes)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(rxagc,no)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
PBX Example:
/////////////////////////////////////////////////////////////////////
[macro-capirxagc]
exten => s,1,capicommand(rxagc,yes)
[isdn-in]
exten => 12345,1,Progress()
exten => 12345,n,Set(TIMEOUT(digit)=1) ; Set Digit Timeout to 5 seconds
exten => 12345,n,Set(TIMEOUT(response)=5) ; Set Response Timeout to 10 seconds
exten => 12345,n,Playback(demo-enterkeywords,noanswer,us)
exten => 12345,n,Answer
exten => 12345,n,Wait(2)
exten => 12345,n,capicommand(rxagc,yes)
exten => 12345,n,Dial(DIALOGICDIVA/ISDN1/100,10,M(capirxagc))
exten => 12345,n,Hangup()
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| txagc |
+-------------------------------------------------------------------+
Description:
Used to activate or to deactivate Automatic Gain Control (AGC)
for Tx direction. AGC level is -6 dBm.
Path:
Applies to Tx path only. In case of line interconnect, it can be activated
for multiple parties.
Supported hardware:
Requires one Diva Media Board equipped with DSPs.
Syntax:
txagc,[yes|no]
Syntax example:
s,n,capicommand(txagc,yes)
s,n,capicommand(txagc,no)
IVR example:
See rxagc
PBX Example:
See rxagc
+-------------------------------------------------------------------+
| rxdgain |
+-------------------------------------------------------------------+
Description:
Used to access Digital Gain Control for Rx direction.
Allows to set gain in the range from -127 dBm to +6 dBm.
Diection:
Applies to Rx path only. In case of line interconnect, it can be activated
for multiple parties.
Supported hardware:
Requires one Diva Media Board equipped with DSPs.
Syntax:
rxdgain,N
N - gain in dBm, float
-127 ... +6 - gain
-128 or less - infinite attenuation
Syntax example:
s,n,capicommand(rxdgain,5.5)
s,n,capicommand(rxdgain,-14.2)
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(rxdgain,5.5)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(rxdgain,-70)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| incrxdgain |
+-------------------------------------------------------------------+
Description:
Used to access Digital Gain Control for Rx direction.
Allows to change gain in the range from -127 dBm to +6 dBm
Diection:
Applies to Rx path only. In case of line interconnect, it can be activated
for multiple parties.
Supported hardware:
Requires one Diva Media Board equipped with DSPs.
incSyntax:
rxdgain,N
N - gain increment in dBm, float
Syntax example:
s,n,capicommand(incrxdgain,2.5) // add 2.5 dBm to actiall gain
s,n,capicommand(incrxdgain,-2.5) // substract 2.5 dBm from actual gain
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(incrxdgain,2.5)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(incrxdgain,-2.5)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| txdgain |
+-------------------------------------------------------------------+
Description:
Used to access Digital Gain Control for Tx direction.
Allows to set gain control in the range from -127 dBm to +6 dBm.
Diection:
Applies to Tx path only. In case of line interconnect, it can be activated
for multiple parties.
Supported hardware:
Requires one Diva Media Board equipped with DSPs.
Syntax:
txdgain,N
N - gain in dBm, float
-127 ... +6 - gain
-128 or less - infinite attenuation
Syntax example:
s,n,capicommand(txdgain,5.5)
s,n,capicommand(txdgain,-14.2)
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(txdgain,5.5)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(txdgain,-70)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| inctxdgain |
+-------------------------------------------------------------------+
Description:
Used to access Digital Gain Control for Tx direction.
Allows to change gain in the range from -127 dBm to +6 dBm
Diection:
Applies to Tx path only. In case of line interconnect, it can be activated
for multiple parties.
Supported hardware:
Requires one Diva Media Board equipped with DSPs.
incSyntax:
rxtgain,N
N - gain increment in dBm, float
Syntax example:
s,n,capicommand(inctxdgain,2.5) // add 2.5 dBm to actiall gain
s,n,capicommand(inctxdgain,-2.5) // substract 2.5 dBm from actual gain
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(inctxdgain,2.5)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(inctxdgain,-2.5)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| pitchcontrol |
+-------------------------------------------------------------------+
Description:
Used to set recording (Rx direction) and playback (Tx direction)
rate in the range between 1250 ... 51200 Hz.
Using pitch control, it is possible to play (record) a voice message faster
(rate > 8000 Hz) or slower (rate < 8000 Hz).
This is useful if the playback speed of voice mail messages needs to be decreased
to achieve better understanding or to increase playback speed to
rewind over a certain part of the voice mail message.
Diection:
Applies to Rx and to Tx path. Can be used only for playback and for
recording of voice data. Not available with line interconnect and RTP.
Supported hardware:
Requires one Diva Media Board equipped with DSPs.
Syntax:
pitchcontrol,RxN,TxN - set Rx and Tx rate to different values
pitchcontrol,N - set Rx and Tx rate to same value
pitchcontrol - deactivate rate control
RxN, TxN, N - rate in the range 1250 ... 51200 Hz.
Syntax example:
s,n,capicommand(pitchcontrol,8200,8100) ; Set Rx rate to 8200 Hz and Tx rate to 8100 Hz
s,n,capicommand(pitchcontrol,8400) ; Set Rx and Tx rate to 8400 Hz
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(pitchcontrol,8200)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(pitchcontrol,8000)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| incpitchcontrol |
+-------------------------------------------------------------------+
Description:
Used to change the recording (Rx direction) and playback (Tx direction)
rate in the range from 1250 ... 51200 Hz.
With pitch control it is possible to play (record) a voice message faster
(rate > 8000 Hz) or slower (rate < 8000 Hz).
This is useful if the playback speed of voice mail messages needs to be decreased
to achieve better understanding or to increase playback speed to
rewind over a certain part of the voice mail message.
Diection:
Applies to Rx and to Tx path. Can be used only for playback and for
recoring of voice data. Not available with line interconnect and RTP.
Supported hardware:
Requires one Diva Media Board equipped with DSPs.
Syntax:
incpitchcontrol,RxN,TxN - change Rx and Tx rate using different values
incpitchcontrol,N - change Rx and Tx rate using same value
RxN, TxN, N - rate change in Hz
Syntax example:
s,n,capicommand(incpitchcontrol,100) // Increase Rx and Tx rate by 100 Hz
s,n,capicommand(incpitchcontrol,-100) // Decrease Rx and Tx rate by 100 Hz
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(incpitchcontrol,100)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(incpitchcontrol,100)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| mftonedetection |
+-------------------------------------------------------------------+
Description:
Used to activate or to deactivate MF listen on B-channel data.
Detected MF tones are mapped to appropriate DTMF digits.
MF digits K1, K2, KP, S1, and ST are mapped to DTMF digits
A, B, C, D, and * respectively.
Direction:
Applies to Rx path only. In case of line interconnect, it can be activated
for multiple parties.
Supported hardware:
Requires one Diva Media Board equipped with DSPs.
Syntax:
mftonedetection,[yes|no]
Syntax example:
s,n,capicommand(mftonedetection,yes)
s,n,capicommand(mftonedetection,no)
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(mftonedetection,yes)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(mftonedetection,no)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| pulsedetection |
+-------------------------------------------------------------------+
Description:
Used to activate or to deactivate dial pulse detector.
Detected dialing pulses are mapped to appropriate DTMF digits.
Direction:
Applies to Rx path only. In case of line interconnect, it can be activated
for multiple parties.
Supported hardware:
Requires one Diva Media Board equipped with DSPs.
Syntax:
pulsedetection,[yes|no]
Syntax example:
s,n,capicommand(pulsedetection,yes)
s,n,capicommand(pulsedetection,no)
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(pulsedetection,yes)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(pulsedetection,no)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| sendtone and stoptone |
+-------------------------------------------------------------------+
Description:
Send tone (sendtone) sending of the next tone while one tone is already
active will automatically replace the tone to be transmitted with the
new one. Sending of the DTMF digits will automatically stop tone transmission.
Stop transmission of the tone (stoptone).
Path:
Applies to Tx path only.
Supported hardware:
Requires one Diva Media Board equipped with DSPs.
Syntax:
sendtone,N
stoptone
N - tone to be sent
0x82 - Dial tone
0x83 - PABX internal dial tone
0x84 - Special dial tone (stutter dial tone
0x85 - Second dial tone
0x86 - Ringing tone
0x87 - Special ringing tone
0x88 - Busy tone
0x89 - Congestion tone (reorder tone
0x8A - Special information tone
0x8B - Comfort tone
0x8C - Hold tone
0x8D - Record tone
0x8E - Caller waiting tone
0x8F - Call waiting tone
0x90 - Pay tone
0x91 - Positive indication tone
0x92 - Negative indication tone
0x93 - Warning tone
0x94 - Intrusion tone
0x95 - Calling card service tone
0x96 - Payphone recognition tone
0x97 - CPE alerting signal
0x98 - Off hook warning tone
0xA0 - Special information tone 0
0xA1 - Special information tone 1
0xA2 - Special information tone 2
0xA3 - Special information tone 3
0xA4 - Special information tone (operator intercept)
0xA5 - Special information tone (vacant circuit)
0xA6 - Special information tone (reorder)
0xA7 - Special information tone (no circuit found)
0xBF - Intercept tone
0xC0 - Modem calling tone
0xC1 - FAX calling tone
0xC2 - Answer tone
0xC3 - Answer tone with phase reversals
0xC4 - ANSam
0xC5 - ANSam with phase reversals
0xC6 - 2225 Hz (Bell 103 answer mode)
0xC7 - FAX flags
0xC8 - G2 FAX group ID
0xCA - Answering Machine Tone (390 Hz)
0xCB - Tone Alerting Signal (for Caller ID in PSTN)
Syntax example:
s,n,capicommand(sendtone,0x83) ; Send PABX internal dial tone
s,n,capicommand(stoptone) ; stop tone transmission
IVR example
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(sendtone,0x83)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(stoptone)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| starttonedetection and stoptonedetection |
+-------------------------------------------------------------------+
Description:
Start tone detection (starttonedetection)
Stop tone detection (stoptonedetection)
Direction:
Applies to Rx path only. In case of line interconnect, it can be activated
for multiple parties.
Supported hardware:
Requires one Diva Media Board equipped with DSPs.
Not available if RTP is active.
Syntax:
starttonedetection,N
stoptonedetection
N - Extension number to be used in case a tone is detected.
The reception of appropriate DTMF digits will be simulated after the
detection of the tone. At same time, the variable CAPIDETECTEDTONE will be set
to identify the detected tone in decimal format and the variable
CAPIDETECTEDTONEVISUAL will be set to a user friendly name of the detected tone.
Tone identifier:
0x82 - Dial tone detected
0x83 - PABX internal dial tone detected
0x84 - Special dial tone (stutter dial tone) detected
0x85 - Second dial tone detected
0x86 - Ringing tone detected
0x87 - Special ringing tone detected
0x88 - Busy tone detected
0x89 - Congestion tone (reorder tone) detected
0x8A - Special information tone detected
0x8B - Comfort tone detected
0x8C - Hold tone detected
0x8D - Record tone detected
0x8E - Caller waiting tone detected
0x8F - Call waiting tone detected
0x90 - Pay tone detected
0x91 - Positive indication tone detected
0x92 - Negative indication tone detected
0x93 - Warning tone detected
0x94 - Intrusion tone detected
0x95 - Calling card service tone detected
0x96 - Payphone recognition tone detected
0x97 - CPE alerting signal detected
0x98 - Off hook warning tone detected
0xA0 - Special information tone 0
0xA1 - Special information tone 1
0xA2 - Special information tone 2
0xA3 - Special information tone 3
0xA4 - Special information tone (operator intercept)
0xA5 - Special information tone (vacant circuit)
0xA6 - Special information tone (reorder)
0xA7 - Special information tone (no circuit found)
0xBF - Intercept tone detected
0xC0 - Modem calling tone detected
0xC1 - FAX calling tone detected
0xC2 - Answer tone detected
0xC3 - Answer tone with phase reversals detected
0xC4 - ANSam detected
0xC5 - ANSam with phase reversals detected
0xC6 - 2225 Hz (Bell 103 answer mode) detected
0xC7 - FAX flags detected
0xC8 - G2 FAX group ID detected
0xC9 - Human speech detected
0xCA - Answering Machine Tone (390 Hz) detected
0xCB - Tone Alerting Signal detected (for Caller ID in PSTN)
Syntax example:
s,n,capicommand(starttonedetection,98) ; Change to extension 98 after detection of tone
s,n,capicommand(stoptonedetection) ; Disable detection of tones
IVR example:
In this example extension 98 is used to process detected tones.
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,Set(TIMEOUT(digit)=1)
exten => 1,n,Set(TIMEOUT(response)=5)
exten => 1,n,capicommand(starttonedetection,98) ; Change to 98 once tone is detected
exten => 1,n,Goto(s,restart)
; Continue after detection of the tone
exten => 98,1,capicommand(stoptonedetection) ; Stop tone detection
exten => 98,n,Set(TESTTONE=${CAPIDETECTEDTONE}) ; Tone identifier
exten => 98,n,Set(TESTTONEVISUAL=${CAPIDETECTEDTONEVISUAL}) ; User friendly name
exten => 98,n,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => 98,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => 98,n,Playback(demo-echodone) ; Let them know it's over
exten => 98,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| vc |
+-------------------------------------------------------------------+
Description:
While a voice message is played back, it is useful to be able to apply
media control commands to the voice stream without interrupting the playback
of the voice stream.
The same is true for conference and for connection between two parties.
The "vc" command allows to provide this functionality. With this command
it is possible to bind arbitrary chan_capi commands to sequences of
events (DTMF digits, ...). Once the events are detected, the appropriate command
is executed without interrupting the voice stream.
"vc" allows to create a menu that is executed in the background and allows to
control the voice stream by activation or deactivation of AGC, noise suppression,
control the level of the signal, and playback speed.
"vc" allows to use any command supported by the channel driver, but please note
that commands are not executed in the context of the dial plan. The commands
are executed using the context of the detected events parallel to the dialplan and
independent from the dialplan.
Syntax:
vc,command,key,param,param1,...,paranN
Add to menu: on detection of key execute command using parameters param1,...,paramN
vc,command,key
Add to menu: on detection of key execute command without parameters
vc,command
Remove all instances of command from menu
vc
Cleanup menu
In case one command will use a key that is already in use, then a new command will overwrite
the existing command:
exten => s,n,capicommand(vc,txagc,3,yes)
exten => s,n,capicommand(vc,inctxdgain,3,1.5)
is equivalent to:
exten => s,n,capicommand(vc,inctxdgain,3,1.5)
It is better to use only one digit as key for commands in menu if using the menu for IVR and
voice mailbox. This provides short response time.
In case the menu is used for conference or for connection between two parties, it may be useful to use
two or three digits for the key. This will prevent an activation by accidentally pressing a key.
Syntax example:
exten => s,n,capicommand(vc,inctxdgain,5,1.5) ; Execute inctxdgain,1.5 if received DTMF digit 5
exten => s,n,capicommand(vc,txagc,3,yes) ; Execute txagc,yes if received DTMF digit 3
IVR Example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer
exten => _X.,n,Goto(s,1)
exten => s,1,Wait(1)
exten => s,n,capicommand(vc,sendtone,1,0x82)
exten => s,n,capicommand(vc,stoptone,2)
exten => s,n,capicommand(vc,txagc,3,yes)
exten => s,n,capicommand(vc,txagc,4,no)
exten => s,n,capicommand(vc,inctxdgain,5,1.5)
exten => s,n,capicommand(vc,inctxdgain,7,-2.5)
exten => s,n,capicommand(vc,incpitchcontrol,8,0,100)
exten => s,n,capicommand(vc,incpitchcontrol,9,0,-400)
exten => s,n(restart),Playback(demo-instruct)
exten => s,n,Goto(s,restart)
exten => s,n,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| chat (MeetMe/Conference) |
+-------------------------------------------------------------------+
Description:
Used to enter (create) chat (conference room). A new conference room is created
if necessary.
There are three types of conference members:
Regular users
Operators
Listeners
Regular users can receive the voice stream from the conference and send the voice stream to the conference.
The outgoing (from user to conference) voice stream from regular users can be muted (deactivated)
and unmuted (activated) if necessary by 'chat_mute' command.
Operators can receive the voice stream from the conference and send the voice stream to the conference.
The outgoing (from user to conference) voice stream from operators cannot be muted (deactivated)
by 'chat_mute' command.
Listeners can only receive the voice stream from the conference.
The outgoing (from user to conference) voice stream is muted (decativated) and cannot be unmuted (activated)
by the 'chat_mute' command.
Direction:
Creates one Any-to-Any conference room. Conference AGC (evaluation of active talker) receives active as
soon as more then two members are added to the conference.
Supported hardware:
Diva
Syntax:
capicommand(chat,<roomname>,<options>,controller)
roomname - conference room name
options
m - The first caller will get music-on-hold until the second caller arrives
h<sec> - Hangup after <sec> seconds if caller is alone in conference.
l - The caller is listener (passive) conference member and cannot be unmuted by 'chat_mute' command
o - The caller is conference operator and cannot be muted by 'chat_mute' command
controller - CAPI controller
Syntax example:
exten => s,n,capicommand(chat,test,m,1)
exten => s,n,capicommand(chat,test,m,1,3)
exten => s,n,capicommand(chat,test,m,1-4)
exten => s,n,capicommand(chat,test,m,1-4,7)
exten => s,n,capicommand(chat,test,m,1-4,7-10)
exten => s,n,capicommand(chat,test,mh300,1-4)
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed, use to select conference room
; You can create macro to set up vc menu
exten => 1,1,capicommand(clamping,100) ; Activate suppression of DTMF tones
exten => 1,n,capicommand(vc,incrxdgain,0,1.5) ; Install voice command menu for volume control, '0' to increase volume
exten => 1,n,capicommand(vc,incrxdgain,1,-1.5) ; Install voice command menu for volume control, '1' to decrease volume
exten => 1,n,capicommand(vc,txdgain,2,-128) ; Install voice command menu for volume control, '2' to mute tx path
exten => 1,n,capicommand(vc,txdgain,3,0) ; Install voice command menu for volume control, '3' to activate tx path
exten => 1,n,capicommand(chat,test1,m,1-4) ; Create/enter conference room 'test1'
exten => 2,1,capicommand(clamping,100) ; Activate suppression of DTMF tones
exten => 2,n,capicommand(txdgain,-128) ; Deactivate tx path
exten => 2,n,capicommand(vc,incrxdgain,0,1.5) ; Install voice command menu for volume control, '0' to increase volume
exten => 2,n,capicommand(vc,incrxdgain,1,-1.5) ; Install voice command menu for volume control, '1' to decrease volume
exten => 2,n,capicommand(vc,txdgain,2,-128) ; Install voice command menu for volume control, '2' to mute tx path
exten => 2,n,capicommand(vc,txdgain,3,0) ; Install voice command menu for volume control, '3' to activate tx path
exten => 2,n,capicommand(chat,test1,m,1-4) ; Create/enter conference room 'test1
exten => 2,n,capicommand(chat,test2,m,1-4) ; Create/enter conference room 'test2'
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| IP Clear Channel fax and chat (MeetMe/Conference) |
| with access to DSP resources |
+-------------------------------------------------------------------+
Description:
Used to assign DSP resources to connected IP users.
Assigned DSP resources can be used for:
Transmission of Clear Channel fax with up to 33600Bps (V.34), please read 'sendfax' in README.Diva.fax for details.
Reception of Clear Channel fax with up to 33600Bps (V.34), please read 'receivefax' in README.Diva.fax for details.
Create conference member with media processing capabilities.
If the conference member is connected to the IP network using 'chat' chan_capi command,
then this peer cannot allocate and use the DSP resources required for media processing.
This results in processing of IP partipiants as simple conferencing member without
any media processing capabilities except line interconnect (conferencing) and
conferencing AGC (active talker evaluation).
With the 'resource' chan_capi command it is possible to assign DSP resources to
the IP network connection before proceeding with 'chat' chan_capi command. This
allows for using the provided DSP resources for media processing for the connected IP
network conference members.
There are three types of conference members:
Regular users
Operators
Listeners
Regular users can receive voice streams from the conference and send voice streams to the conference.
The outgoing (from user to conference) voice stream from regular users can be muted (deactivated)
and unmuted (activated) if necessary by 'chat_mute' command.
Operators can receive voice streams from the conference and send voice streams to the conference.
The outgoing (from user to conference) voice stream from operators cannot be muted (deactivated)
by 'chat_mute' command.
Listeners can only receive the voice stream from the conference.
The outgoing (from user to conference) voice stream is muted (decativated) and cannot be unmuted (activated)
by 'chat_mute' command.
Note:
Certain problems may occur if processing sent in-band DTMF events for
IP connections.
chan_diva can use sent in-band DTMF events to control media
processing (chan_capi 'vc' command). This works without problems for
E.1/T.1/S0/Analog connections. But in case of IP connections, the media
stream is processed by the gateway or is originated by the IP device.
Most of the gateways will remove in-band DTMF events from the media stream and
forward detected DTMF events as RTP payloads. IP devices will not use
in-band DTMF signaling and send DTMF events as RTP payloads.
In both cases, DTMF events are not sent in-band and processed by signaling
before reaching the chan_capi.
The solution is to configure gateways and IP devices to send DTMF events
in-band in addition to sending them as RTP payloads or use in-band MF signaling.
Supported hardware:
Assign DSP resources to connected IP network conference members. This feature is available
only for Diva hardware equipped with DSPs.
For Diva 2PRI PCI, Diva 4PRI PCI, Diva 1PRI PCIe HS, Diva 2PRI PCIe HS, and Diva 4PRI PCIe HS no
restrictions apply for this feature and it is possible to access N x 30 DSP resources
(N - amount of interfaces, 1 - 1PRI, 2 - 2PRI, 4 - 4PRI) in addition to used for E.1/T.1
DSP resources.
For Diva PRI Rev.3 PCI and Diva PRI Rev.3 PCIe, it is possible to reserve two DSPs for processing
of E.1/T.1 without media processing features and share remaining DSPs between E.1/T.1 and IP
for connections with media processing features.
Using hardware with 30 DSPs and E.1 it is possible to create:
From: 2 x E.1 without media processing + 28 x E.1 with media processing
To: 30 x E.1 without media processing + 28 x IP with media processing
Using hardware with 30 DSPs and T.1 this is possible to create:
From: 23 x T.1 with media processing + 7 x IP with media processing
To: 23 x T.1 without media processing + 28 x IP with media processing
For Diva BRI-2M Rev.2 PCI, Diva BRI-2M PCIe, Diva 4BRI Rev.2 PCI and for Diva 4BRI PCIe
it is not possible to reserve DSPs for processing of ISDN connections and to share
DSPs between ISDN and IP connection. If DSP resources are assigned to connected
IP conference members, then the appropriate DSP resources receive not available
for processing of ISDN connections. As result ISDN connections cannot be processed.
To resolve this problem please use the Diva configuration to change the configuration
of Diva board to resource board mode. In resource board mode, the ISDN interface is deactivated
and all available DSP resources (two DSPs for Diva BRI-2M and eight DSPs for Diva 4BRI)
can be used for connected IP conference members (two members for Diva BRI-2M and
eight members for Diva 4BRI).
Syntax:
capicommand(ressource,controller[,codeclist])
controller - CAPI controller
codeclist - separated by '+' character list of supported codecs, optional
codec oder codec1+codec2+...+codecN
Syntax example:
exten => s,n,capicommand(resource,1)
exten => s,n,capicommand(resource,1,3)
exten => s,n,capicommand(resource,1-4)
exten => s,n,capicommand(resource,1-4,7)
exten => s,n,capicommand(resource,1-4,7-10)
exten => s,n,capicommand(resource,1-4,7-10,gsm)
exten => s,n,capicommand(resource,1-4,7-10,alaw+ulaw+gsm+g722)
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,capicommand(resource,1-4) ; Create DSP resource on CAPI controllers 1-4 for IP members,
; ignore command for E.1/T.1/S0/POTS members
exten => s,n,capicommand(clamping,100) ; Activate suppression of DTMF tones
exten => s,n,capicommand(rxagc,yes) ; Activate Rx AGC
exten => s,n,capicommand(noisesuppressor,yes) ; Activate suppression of ambient noises
exten => s,n,capicommand(vc,incrxdgain,0,1.5) ; Install voice command menu for volume control, '0' to increase volume
exten => s,n,capicommand(vc,incrxdgain,1,-1.5) ; Install voice command menu for volume control, '1' to decrease volume
exten => s,n,capicommand(vc,txdgain,2,-128) ; Install voice command menu for volume control, '2' to mute tx path
exten => s,n,capicommand(vc,txdgain,3,0) ; Install voice command menu for volume control, '3' to activate tx path
exten => s,n,capicommand(chat,test1,m,1-4) ; Craete/enter conference toom 'test1', controller field is ignored if
; media processing resource is assigned by 'resource' command or for
; E.1/T.1/S0/POTS members
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| chat_mute (Manage conference) |
+-------------------------------------------------------------------+
Description:
Used to manage chat (conference room). There are three types of conference members:
Regular users
Operators
Listeners
Regular users can receive the voice stream from the conference and send the voice stream to the conference.
The outgoing (from user to conference) voice stream from regular users can be muted (deactivated)
and unmuted (activated) if necessary by 'chat_mute' command.
Operators can receive the voice stream from the conference and send the voice stream to the conference.
The outgoing (from user to conference) voice stream from operators cannot be muted (deactivated)
by 'chat_mute' command.
Listeners can only receive the voice stream from the conference.
The outgoing (from user to conference) voice stream is muted (decativated) and cannot be unmuted (activated)
by 'chat_mute' command.
'chat_mute' command allows to manage conference switching of regular users between active (voice stream from
user to conference is active and used in conference) and passive (voice stream from user to conference
is deactivated and not used in conference) mode. 'chat_mute' command applies to regular users only.
The state of operators and listeners is not changed by this commmand. Independent from changes to this
command state, conference operators will remain active members and listeners will remain passive members
of the conference.
Direction:
Used to control (deactivate and activate) the voice stream from regular users to the conference.
Note:
The voice stream of regular users is active by default. If the conference mode was changed to half duplex
('chat_mute,yes'), then new regular users are created with a deactivated voice stream until the conference
mode is changed back to full duplex ('chat_mute,no')
Supported hardware:
Diva
Syntax:
capicommand(chat_mute,<action>[,<roomname>])
action - mandatory
yes - Change conference mode to half duplex, deactivate voice stream from regular
users to conference.
no - Change conference mode back to full duplex, activate voice stream from regular
users to conference.
roomname - Conference room name. This parameter is necessary if a caller is not a member of the conference.
It allows the control of the conference by one user, who not member of conference. Using
this parameter, one user can control multiple conferences. This allows to implement the
functionality of a common conference operator.
Syntax example:
exten => s,n,capicommand(chat_mute,yes)
exten => s,n,capicommand(char_mute,no)
exten => s,n,capicommand(chat_mute,yes,test_room)
exten => s,n,capicommand(char_mute,no,test_room)
Conference example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => 1291,1,Answer ; Accept call
exten => 1291,n,capicommand(resource,1-4) ; assign resource PLCI if call from IP
exten => 1291,n,capicommand(clamping,200) ; Activate DTMF suppression
exten => 1291,n,capicommand(vc,chat_mute,0,yes) ; Voice command, key 0 - change to half duplex mode
exten => 1291,n,capicommand(vc,chat_mute,1,no) ; Voice command, key 0 - change to full duplex mode
exten => 1291,n,capicommand(chat,test_chat,mo,1-4) ; Add to conference as operator
exten => 1291,n,Hangup()
exten => 1292,1,Answer ; Accept call
exten => 1292,n,capicommand(resource,1-4) ; Assign resource PLCI if call from IP
exten => 1292,n,capicommand(clamping,200) ; Activate DTMF suppression
exten => 1292,n,capicommand(chat,test_chat,m,1-4) ; Add to conference as regular user
exten => 1292,n,Hangup()
exten => 1293,1,Answer ; Accept call
exten => 1293,n,capicommand(resource,1-4) ; Assign resource PLCI if call from IP
exten => 1293,n,capicommand(clamping,200) ; Activate DTMF suppression
exten => 1293,n,capicommand(chat,test_chat,ml,1-4) ; Add to conference as listener
exten => 1293,n,Hangup()
exten => _X.,1,Answer
exten => _X.,n,Goto(s,1)
exten => s,1,Wait(1)
exten => s,n(restart),Playback(demo-instruct)
exten => s,n,Goto(s,restart)
exten => s,n,Hangup
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| chat_play (play message to Conference) |
+-------------------------------------------------------------------+
Description:
Used to play voice message to conference. Optionally music on hold is played to caller
while message is played to conference.
Direction:
Message is played to all members of conference
Supported hardware:
Diva
Syntax:
capicommand(chat_play,<roomname>,<options>,<filename>,controller)
roomname - conference room name
options
m - The caller will get music-on-hold while message is played
s - The caller will hear the same message that is played
filename - Voice message file name. Should be in aLaw (uLaw) format.
controller - CAPI controller
Syntax example:
exten => s,n,capicommand(chat,test,m,/tmp/file.alaw,1)
exten => s,n,capicommand(chat,test,,/tmp/file.alaw,1-4,7-10)
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,capicommand(clamping,100) ; Activate suppression of DTMF tones
exten => s,n,Playback(record-name) ; Ask for name
exten => s,n,capicommand(rxagc,yes) ; Activate Rx AGC
exten => s,n,Record(/tmp/${UNIQUEID}-info:alaw) ; Record message
exten => s,n,capicommand(rxagc,no) ; Deactivate Rx AGC
exten => s,n,capicommand(chat_play,test,m,/tmp/${UNIQUEID}-info.alaw,1-4) ; Play message to conference,
; play music on hold to caller
exten => s,n,capicommand(chat,test,m,1-4) ; Create/enter conference room 'test'
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| chat_command (Command) |
+-------------------------------------------------------------------+
Description:
Used to send command to conference.
Supported hardware:
Diva
Syntax:
capicommand(chat_command,<options>,<roomname>)
options - mandatory
r - Remove newest user from conference.
Command does not apply to calling member and be used by operators only.
l - Remove all listeners from conference.
Command does not apply to calling member and be used by operators only.
o - Remove all operators from conference.
Command does not apply to calling member and be used by operators only.
a - Remove all users from conference.
Command does not apply to calling member and be used by operators only.
roomname - optional, room caller assigned to is used if not present
Syntax example:
exten => s,n,capicommand(chat_command,r)
exten => s,n,capicommand(chat_command,lo,test)
exten => s,n,capicommand(chat_command,a,test)
Conference example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer
exten => _X.,n,Authenticate(12345)
exten => _X.,n,Playback(vm-rec-name)
exten => _X.,n,Record(/tmp/name${UNIQUEID}.alaw,5,15) ; Record name
exten => _X.,n,capicommand(chat_play,c1,,/tmp/name${UNIQUEID}.alaw,1-4) ; Play name to conference
exten => _X.,n,capicommand(resource,1-4) ; Create resource PLCI if call from IP
exten => _X.,n,capicommand(clamping,200) ; Activate suppression of DTMF codes
exten => _X.,n,capicommand(vc,chat_mute,1,yes) ; Voice command, key 1 - mute all members except operators
exten => _X.,n,capicommand(vc,chat_mute,2,no) ; Voice command, key 2 - unmute all members except operators
exten => _X.,n,capicommand(vc,chat_command,0,a,c1) ; Voice command, key 0 - remove all members from conference
exten => _X.,n,capicommand(vc,noisesuppressor,3,yes) ; Voice command, key 3 - turn noise suppression on
exten => _X.,n,capicommand(vc,noisesuppressor,4,no) ; Voice command, key 4 - turn noise suppression off
exten => _X.,n,capicommand(chat,c1,mo,1-4) ; Add caller to conference as operator
/////////////////////////////////////////////////////////////////////
+-------------------------------------------------------------------+
| echocancel |
+-------------------------------------------------------------------+
Description:
Used to activate or to deactivate echo cancellation in accordance with G.168.
The vast majority of the public telephone system local loop wiring is done using
two-wire connections whereby the same pair of wires carries voice signals in both
directions. In the telephone company's central office or in an office PBX,
a two-to-four wire conversion is done using a hybrid circuit. Hybrid circuits do
not perform perfect impedance matches. The imperfection results in echo. The echo
canceller's goal is to detect and remove echo as quickly and effectively, thereby
minimizing any loss in voice quality due to the echo. The echo canceller must
perform this function under all conditions including double-talk (when both parties
are speaking at the same time) and in the presence of background noise. Furthermore,
the echo canceller must not cause detriment to signaling tones (DTMF etc.) or fax and
modem transmissions.
Diva supports echo cancellation (in accordance G.168 with NLP) with tail length up to 256 ms.
256 ms tail length is required to ensure the operation in the environments where the signal
is carried over the packet network. This is not always the case at customer site and can be done
by the transit network, wich does not provide own echo cancellation capabilities.
'echocancelnlp' configuration parameter (capi.conf) is used to activate (deactivate) NLP
(Non Linear Processor which removes the residual echo at the output of the echo cancellation unit).
You can use Diva chan_capi configuration to change this capi.conf configuration parameter.
The Diva software automatically deactivates echo cancellation upon the detection of fax or modem transmission.
Direction:
Aplies to TDM interface (E.1/T.1/S0) only
Supported hardware:
Diva Media Boards equipped with DSPs.
Syntax:
echocancel,[yes|no]
Syntax example:
s,n,capicommand(echocancel,yes)
s,n,capicommand(echocancel,no)
IVR example:
/////////////////////////////////////////////////////////////////////
[isdn-in]
exten => _X.,1,Answer ; Answer the line
exten => _X.,n,Goto(s,1)
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
exten => s,n,WaitExten ; Wait for an extension to be dialed.
exten => 1,1,capicommand(echocancel,yes)
exten => 1,n,Goto(s,restart)
exten => 2,1,capicommand(echocancel,no)
exten => 2,n,Goto(s,restart)
exten => 99,1,Echo
exten => i,1,Playback(invalid)
exten => i,n,Goto(s,restart)
exten => h,1,Hangup
/////////////////////////////////////////////////////////////////////
PBX Example:
/////////////////////////////////////////////////////////////////////
[macro-capiechocancel]
exten => s,1,capicommand(echocancel,yes)
[isdn-in]
exten => 12345,1,Progress()
exten => 12345,n,Set(TIMEOUT(digit)=1) ; Set Digit Timeout to 5 seconds
exten => 12345,n,Set(TIMEOUT(response)=5) ; Set Response Timeout to 10 seconds
exten => 12345,n,capicommand(echocancel,yes)
exten => 12345,n,Playback(demo-enterkeywords,noanswer,us)
exten => 12345,n,Answer
exten => 12345,n,Wait(2)
exten => 12345,n,Dial(DIALOGICDIVA/ISDN1/100,10,M(capiechocancel))
exten => 12345,n,Hangup()
/////////////////////////////////////////////////////////////////////
Reference in new issue View Git Blame Copy Permalink