MelwareDE
f13580a630
- fixed capi init order (thanks to Hans Petter Selasky)
2005-10-01 11:31:05 +00:00
MelwareDE
e9a77b066a
- fixed did handling
2005-10-01 09:52:46 +00:00
MelwareDE
e62f05eb33
- set RDNIS if redirecting number was received.
2005-10-01 08:54:09 +00:00
MelwareDE
47df07e707
- simplified call to ast_exists_extension()
2005-09-27 17:52:13 +00:00
MelwareDE
ff47191932
- when check for valid extension, check the callerid as well
2005-09-27 17:42:28 +00:00
MelwareDE
73f7eb185d
- changed call-waiting and deflect handling in CONNECT_IND
2005-09-27 09:33:21 +00:00
MelwareDE
acdefd3374
- use 'immediate' config in MSN mode, if pbx shall be started on
...
CONNECT_IND and shall not wait until SETUP/SENDING-COMPLETE was received.
Since info like REDIRECTINGNUMBER will come after CONNECT_IND, this may
be lost then. But for some drivers/telcos/pbx, this setting is needed.
2005-09-26 11:35:13 +00:00
MelwareDE
b805e5f809
Fix start of line interconnect in old mode.
2005-09-25 15:39:13 +00:00
MelwareDE
c2ef8139d9
Start early-b3 on PROCEEDING too.
2005-09-25 13:11:00 +00:00
MelwareDE
9ac42119a7
- don't send audio data, if in fax receive mode
...
- disconnect on finished fax immediately
2005-09-24 19:42:07 +00:00
MelwareDE
1f8587cb76
Don't run through gain list, if gain is 1.0.
...
Thanks to Sergio Chersovani.
2005-09-24 18:19:14 +00:00
MelwareDE
9f6b0b9bda
Use correct A-law idle value.
2005-09-24 18:10:46 +00:00
MelwareDE
0568f2278c
Fixed facility_conf parameters check.
2005-09-17 18:58:34 +00:00
MelwareDE
d73253a545
Added custom function VANITYNUMBER to convert letters into digits.
2005-09-17 10:49:34 +00:00
MelwareDE
a69b6caae1
Don't retrieve on ringing-indication for now.
2005-09-15 19:19:16 +00:00
MelwareDE
76596fb310
- better check with find_interface() for BSD
...
- first implementation for line interconnect
2005-09-15 19:11:45 +00:00
MelwareDE
37d7576120
- added more BSD compat
...
- optimized capi message handling
2005-09-11 13:35:19 +00:00
MelwareDE
e3cb5c02cf
Added BSD compatibility, thanks to Hans Petter Selasky.
2005-09-11 08:39:29 +00:00
MelwareDE
ccdaab9147
Set STATE_RING on PBX start.
2005-09-10 13:36:55 +00:00
MelwareDE
874567ff21
- Pass each PROGRESS-type to Asterisk, but only once.
...
- enable early-b3 on each PROGRESS-Indicator type.
2005-09-04 13:51:50 +00:00
MelwareDE
92ae437462
Do really hangup on remote hangup with outgoing call and earlyb3.
2005-09-03 16:52:48 +00:00
MelwareDE
ccf256ebac
ast_hangup() on state 'INCALL' if the pbx was not started yet.
2005-08-31 07:32:09 +00:00
MelwareDE
8b97a66223
- use 'sending complete' for SETUP on incoming call
2005-08-31 07:22:32 +00:00
MelwareDE
e237467eb2
Added verbose text for capi info/reason error messages.
2005-08-30 11:21:58 +00:00
MelwareDE
5f2c9b9381
- fixed echo-cancel setup structure
...
- use correct facility-selector for echo-cancel
- use capi.conf option 'echocancelold' for old facility-selector (6)
2005-08-29 19:06:19 +00:00
MelwareDE
637e509c96
Check for resent SETUP message.
2005-08-29 15:21:12 +00:00
MelwareDE
2356a1f435
remove possible overflow in capi_number()
2005-08-29 14:58:36 +00:00
MelwareDE
398aa1b09f
- added variable REDIRECTREASON
...
- use stack memory for capi_number()
- use struct for capicommand() commands
- capicommand(RETRIEVE) can now be called from other channels
- start PBX on SETUP only.
2005-08-28 14:14:23 +00:00
MelwareDE
7ee382db9e
Set temporary holdtype via capicommand().
2005-08-25 19:30:31 +00:00
MelwareDE
d5490d3ac5
- changed isdnmode configuration from ptp/ptmp to msn/did
...
- added ntmode configuration
2005-08-25 19:00:55 +00:00
MelwareDE
e7cc5d7be4
Switched to 'holdtype' configuration.
2005-08-25 18:16:44 +00:00
MelwareDE
aa6849f48f
When enabling/disabling echo-squelch via capicommand(), this should be
...
a temporary setting only.
2005-08-25 17:45:39 +00:00
MelwareDE
861ddcf723
Use variable CONNECTEDNUMBER on Answer().
2005-08-25 12:54:04 +00:00
MelwareDE
44934a4f4f
Set variable REDIRECTINGNUMBER on incomming call if it was diverted.
2005-08-25 11:22:34 +00:00
MelwareDE
aef27548d5
ECT should work now (not yet really tested).
2005-08-21 15:35:44 +00:00
MelwareDE
ab3ff868aa
- moved ECT to capicommand() (not working yet)
...
- added HOLD/RETRIEVE for Asterisk indications.
2005-08-21 10:28:43 +00:00
MelwareDE
0e85ce353d
- simplyfied read of supplementary services
2005-08-19 17:18:10 +00:00
MelwareDE
ec07811d72
- fixed unload
...
- removed obsolete thread mutex
2005-08-19 16:40:23 +00:00
MelwareDE
b5f91be828
Added info elements 'notification indication' and 'notify'.
2005-08-19 16:16:19 +00:00
MelwareDE
dafa5e1fe0
- verbose/debug messages with better prefix usage.
...
- added asterisk HOLD definition
2005-08-19 15:55:56 +00:00
MelwareDE
703b8662d1
Fixed dnid/exten/immediate handling on PtP.
2005-08-18 07:25:17 +00:00
MelwareDE
effa5cf682
Fixed compilation with Asterisk 1.0.X
2005-08-17 12:13:19 +00:00
MelwareDE
df6009a9af
Moved 'hold' and 'retrieve' to capicommand().
2005-08-16 18:25:03 +00:00
MelwareDE
204229563b
First changes for RTP bridging support.
2005-08-16 10:11:43 +00:00
MelwareDE
d057edc4e7
MCID is now done via capicommand()
2005-08-14 14:57:04 +00:00
MelwareDE
202a55682e
Enable/Disable echosquelch via capicommand().
2005-08-14 13:59:16 +00:00
MelwareDE
743e63fbf7
Receive a fax via CAPI is now done with capicommand(receivefax|...)
2005-08-14 12:32:18 +00:00
MelwareDE
8f8b5bd30c
- Fixed call-deflection and moved this feature from separate application
...
to capicommand().
2005-08-13 18:21:20 +00:00
MelwareDE
5ea11118df
- don't send DTMF 'X' and 'Y' to Asterisk.
...
- don't error, just be debug-verbose on no owner in pipe_frame.
2005-08-13 12:13:02 +00:00
MelwareDE
7b9ac6df71
Show confirmation error on real error only.
2005-08-13 11:15:51 +00:00