MelwareDE
d2b4bdd349
Added config option for subscriber number prefix.
2008-07-07 20:29:19 +00:00
MelwareDE
b45e940762
Added 'faxdetecttime' config setting.
2008-06-29 11:33:46 +00:00
MelwareDE
42d240e32e
minor typos and cosmetics in text
2008-02-22 17:01:46 +00:00
MelwareDE
25966a7046
updated copyright
2008-02-05 11:16:25 +00:00
MelwareDE
5ee344040d
New Diva name branding.
2008-02-05 10:57:54 +00:00
MelwareDE
04528a3ea2
Added hint not to use echosquelch with voicemail.
2007-10-07 11:00:56 +00:00
MelwareDE
f9799f6eb6
Added transfergroup config option. Prepared transfer on bridge feature.
2007-09-30 21:09:15 +00:00
MelwareDE
9ae64305da
QSIG:
...
- more work on addressing data elements
- completed CallTransfer handling with inbound bridging
- first outbound Path Replacement support for inbound bridging
Code isn't first class yet. There may be some errors still there.
2007-07-05 19:48:19 +00:00
MelwareDE
6c19246b9d
- Added QSIG patch from Mario Goegel.
2007-02-11 16:01:32 +00:00
MelwareDE
096bacf541
- fixed compiler warning with Asterisk 1.4.0
...
- added music-on-hold on HOLD request for Asterisk 1.4
2007-02-11 14:34:10 +00:00
MelwareDE
24081da912
- Added Asterisk 1.4 jitterbuffer usage.
2007-02-10 23:18:57 +00:00
MelwareDE
61f051745e
- Added information and changed example for tx/rx gains.
2006-12-02 10:08:50 +00:00
MelwareDE
06135eb7dc
Added AMA flags
2006-07-08 22:13:47 +00:00
MelwareDE
c7ce547983
- make pickupexten work and added pickupgroup to capi.conf
2006-07-08 16:29:27 +00:00
MelwareDE
c6d777d26a
- allow one controller number per specified interface only.
2006-06-18 20:57:56 +00:00
MelwareDE
c56504fd7b
- better use of fax state variables and added configuration for
...
faxdetection. Attention: default is now 'off'.
2006-05-27 12:49:57 +00:00
MelwareDE
944a643786
- better default setting for echo-cancel
...
- added non-linear-processing option for echo-cancel
2006-04-01 16:29:50 +00:00
MelwareDE
c828da398a
- added better compatibility for OpenPBX code creation.
...
- added first code for RTP over CAPI for Eicon DIVA Server cards.
2006-01-30 23:40:28 +00:00
MelwareDE
62fe88239b
- added language support
...
- prepared devicestate(hint) support
2005-12-28 14:22:54 +00:00
MelwareDE
0c6ebce107
- holdtype=hold is not default
2005-12-27 20:29:06 +00:00
MelwareDE
a9192a9555
- added config 'defaultcid' to set a default caller id which will be
...
used if dial option 'd' is specified.
2005-10-09 15:49:32 +00:00
MelwareDE
82956c6319
- added channel locks
2005-10-01 13:21:28 +00:00
MelwareDE
acdefd3374
- use 'immediate' config in MSN mode, if pbx shall be started on
...
CONNECT_IND and shall not wait until SETUP/SENDING-COMPLETE was received.
Since info like REDIRECTINGNUMBER will come after CONNECT_IND, this may
be lost then. But for some drivers/telcos/pbx, this setting is needed.
2005-09-26 11:35:13 +00:00
MelwareDE
5dad6d2278
removed old example from capi.conf
2005-09-21 13:55:18 +00:00
MelwareDE
76596fb310
- better check with find_interface() for BSD
...
- first implementation for line interconnect
2005-09-15 19:11:45 +00:00
MelwareDE
e3cb5c02cf
Added BSD compatibility, thanks to Hans Petter Selasky.
2005-09-11 08:39:29 +00:00
MelwareDE
5f2c9b9381
- fixed echo-cancel setup structure
...
- use correct facility-selector for echo-cancel
- use capi.conf option 'echocancelold' for old facility-selector (6)
2005-08-29 19:06:19 +00:00
MelwareDE
d5490d3ac5
- changed isdnmode configuration from ptp/ptmp to msn/did
...
- added ntmode configuration
2005-08-25 19:00:55 +00:00
MelwareDE
e7cc5d7be4
Switched to 'holdtype' configuration.
2005-08-25 18:16:44 +00:00
MelwareDE
aef27548d5
ECT should work now (not yet really tested).
2005-08-21 15:35:44 +00:00
MelwareDE
ab3ff868aa
- moved ECT to capicommand() (not working yet)
...
- added HOLD/RETRIEVE for Asterisk indications.
2005-08-21 10:28:43 +00:00
MelwareDE
d90cc3e3a0
Added config option 'immediate' to start pbx if no dnid has been
...
received yet.
2005-08-13 09:31:07 +00:00
MelwareDE
450dd31d58
Added 'relaxdtmf'.
2005-08-07 12:21:36 +00:00
MelwareDE
6e4940b41a
U-Law setting is now done in capi.conf instead of Makefile define.
2005-08-07 11:40:07 +00:00
MelwareDE
e90739c7e8
- capi.conf structure changes: one own section for each interface,
...
no global 'interfaces' any more. Section name will be interface name.
- restructured module loading and init.
- dial string changed: parameters like 'b' no in number any more.
- send alert on alerting only (busy() and congestion() work now).
- better overlap sending (new parameter 'o' for dialstring to
send only the first two digits with CONNECT_REQ only, the remaining
digits and even digits following the dial() command, will be send
as INFO_REQ/Overlap).
2005-07-17 19:01:14 +00:00
MelwareDE
c16ca054a5
Initial import of new chan_capi.
2005-06-02 18:47:35 +00:00