MelwareDE
407e678cb4
- make sure digital data connections are handled correctly without RTP
2006-05-22 11:04:33 +00:00
MelwareDE
f4fe1dc73f
- destroy interface lock on unload
2006-05-21 14:42:17 +00:00
MelwareDE
5827ebfedb
- added missing alias for mutex_destroy
2006-05-21 14:18:55 +00:00
MelwareDE
c3cc336d96
- added verbose output when echo-cancel status is not changed
2006-05-21 13:13:16 +00:00
MelwareDE
f1318438d3
- added capicommand(echocancel|on/off) to dynamically en/disable CAPI
...
echo-chancel.
2006-05-21 12:10:53 +00:00
MelwareDE
0b5ff0dd0f
- check for rtp struct in read/write rtp functions
2006-05-21 08:50:46 +00:00
MelwareDE
0447547c55
- use better RTP jitterbuffer settings
...
- improved answer/hangup capi race conditions
2006-05-20 22:01:26 +00:00
MelwareDE
2004dd14b4
- make sure readformat is set correctly when in rtp mode
2006-05-20 21:59:50 +00:00
MelwareDE
705a9807f5
- increase the DTMF timing a little bit
2006-05-20 20:32:54 +00:00
MelwareDE
a1d2cbdc52
- cosmetic change in RTP codec list
2006-05-20 19:43:47 +00:00
MelwareDE
254f20521e
- fixed echo-cancel profile check, thanks to HPS for pointing out.
2006-05-19 09:51:45 +00:00
MelwareDE
badd38d9a2
- use 'trans' instead of 'voice' for bproto desc.
...
- don't use RTP in digital mode
2006-05-18 14:36:09 +00:00
MelwareDE
befe1c83f1
- don't allow too big packets to send.
2006-05-18 14:35:02 +00:00
MelwareDE
23973edf04
- added missing aliases for openpbx
2006-05-17 21:16:06 +00:00
MelwareDE
784a628015
- fixed facility parameter for reading RTP profile
2006-05-13 13:39:03 +00:00
MelwareDE
3d4e19f50c
- just use char instead of unsigned char for verbose line buffer
2006-05-12 16:48:09 +00:00
MelwareDE
4f14c385ae
- added first step to compat with newer versions of asterisk
2006-05-12 16:43:30 +00:00
MelwareDE
d1f147ffe8
- don't use smoother in RTP mode and make sure not to
...
send too may DATA_B3_REQs
2006-05-08 16:48:57 +00:00
MelwareDE
e9bc5965a4
- don't setup echo-cancel in digital connections
2006-05-08 15:51:08 +00:00
MelwareDE
286435c900
- fixed wrong offset of info word in facility_conf for LI, thanks to HPS
2006-05-08 15:30:05 +00:00
MelwareDE
dafad9727e
- don't send voice to pbx when we are about to disconnect
2006-05-08 15:10:22 +00:00
MelwareDE
6780755b7c
- moved deflect function from INFO_REQ to FACILITY_REQ
2006-05-07 20:06:01 +00:00
MelwareDE
e2da85d7fe
Don't drop the connection if voice frames are incompatible,
...
just output the error and drop the frame.
2006-04-26 12:53:09 +00:00
MelwareDE
316eebf9ee
- if there is no data in a voice frame, it is not really an error.
2006-04-04 12:43:31 +00:00
MelwareDE
059bdfe0df
- added more info shown with CLI command 'capi show channels'
2006-04-03 20:44:08 +00:00
MelwareDE
2dbc99f5b2
- update status
2006-04-03 20:12:21 +00:00
MelwareDE
1742806313
- removed pipe code, use queue_frame instead
2006-04-03 20:02:01 +00:00
MelwareDE
620556efd6
- correct current status
2006-04-02 12:13:58 +00:00
MelwareDE
fdc7448269
- cleanup of some openpbx defines
2006-04-01 21:01:41 +00:00
MelwareDE
a1f9a32839
Added missing changes
2006-04-01 19:40:32 +00:00
MelwareDE
192b57024b
- added test to not use pipes for frame delivery.
2006-04-01 17:00:57 +00:00
MelwareDE
944a643786
- better default setting for echo-cancel
...
- added non-linear-processing option for echo-cancel
2006-04-01 16:29:50 +00:00
MelwareDE
1aecef90dc
- added new cli 'capi show channels' with a little bit channel info
2006-04-01 15:39:31 +00:00
MelwareDE
bacf848e77
- cleaning up bridge code, moving to 'transparent mode' is not
...
necessary when bridging in RTP, we just drop the incoming frames then.
2006-04-01 13:31:56 +00:00
MelwareDE
4d71e8690b
Added removal of openpbx temp dir in clean target.
2006-04-01 12:17:32 +00:00
MelwareDE
9671c6df5c
- removed custom function VANITYNUMBER, this does not belong
...
into a channel driver.
2006-04-01 11:37:02 +00:00
MelwareDE
a662db2864
- fixed call-deflect if the number is too long.
...
PR#5
2006-04-01 11:20:55 +00:00
MelwareDE
ddede6383f
Added missing definition.
2006-03-30 15:32:54 +00:00
MelwareDE
a5239eea72
- removed obsolete .cvsignore
2006-03-26 16:23:40 +00:00
MelwareDE
8080bf65ac
- removed getting ASTERISKVERSION (we don't need that).
...
- reverted change for set NCCI in CONNECT_B3_ACTIVE_IND, because
CONNECT_B3_IND assigned the NCCI.
- reverted change for setting 'ton' in capi_new(), because I don't see
the fix here and it breaks the feature anyway.
2006-03-07 21:17:58 +00:00
MelwareDE
c522111bf3
removed CC_NEW_CODEC_FORMATS, because it is not used in any
...
asterisk version and breaks compilation anyway.
2006-03-07 21:02:59 +00:00
MelwareDE
68686fc241
Allow CAPI controller to enable/disable B3 by sending DISCONNECT_B3_IND followed by CONNECT_B3_ACTIVE_IND. This happens if the CAPI controller is running NT-mode and the TE-side puts the call on hold/retrive.
2006-03-06 12:38:59 +00:00
MelwareDE
27b01dea2d
Avoid double prefixing of calling party number, by setting 'cid_ton' equal to zero.
2006-03-06 12:29:22 +00:00
MelwareDE
74d8763401
- removed compiler warning
2006-02-18 14:30:00 +00:00
MelwareDE
0d75a3e5af
Undo test commit.
2006-02-15 18:24:08 +00:00
MelwareDE
69d0731ead
Test commit.
2006-02-15 18:21:09 +00:00
MelwareDE
02cf3834d9
Updated the Makefile so that example configuration files are installed in the correct directories on FreeBSD and NetBSD.
2006-02-14 15:24:34 +00:00
MelwareDE
3d316a8ab5
- make the voice buffer a little bit bigger and use the definitions.
2006-02-13 15:18:56 +00:00
MelwareDE
6a50aeb45e
- cosmetic/indent changes (tabs are tabs, no spaces!)
2006-02-13 15:11:56 +00:00
MelwareDE
380d705858
Added new control for codec_pref
2006-02-13 15:10:32 +00:00