Add description for media control commands
This commit is contained in:
parent
6cb7e6f083
commit
563494740a
|
@ -0,0 +1,839 @@
|
|||
+===================================================================+
|
||||
| Media control commands |
|
||||
+===================================================================+
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| noisesuppressor |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Used to activate or to deactivate suppression of ambient noise.
|
||||
Can be used to remove caused by fans, air cooling systems, cars,
|
||||
trains and other sources of ambient noises from speech.
|
||||
|
||||
Direction:
|
||||
Applies to Rx path only.
|
||||
In case of line interconnect can be activated for multiple parties.
|
||||
|
||||
Supported hardware:
|
||||
Diva 4PRI PCI, Diva 2PRI PCI, Diva 4PRI PCIe HS
|
||||
Other equipped with DSP Diva hardware can use this feature only
|
||||
together with RTP
|
||||
|
||||
Syntax:
|
||||
noisesuppressor|yes,no
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(noisesuppressor|yes)
|
||||
s,n,capicommand(noisesuppressor|no)
|
||||
|
||||
IVR example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
exten => 1,1,capicommand(noisesuppressor|yes)
|
||||
exten => 1,n,Goto(s,restart)
|
||||
exten => 2,1,capicommand(noisesuppressor|no)
|
||||
exten => 2,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
PBX Example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[macro-capinoisesuppressor]
|
||||
exten => s,1,capicommand(noisesuppressor|yes)
|
||||
|
||||
[isdn-in]
|
||||
exten => 12345,1,Progress()
|
||||
exten => 12345,n,Set(TIMEOUT(digit)=1) ; Set Digit Timeout to 5 seconds
|
||||
exten => 12345,n,Set(TIMEOUT(response)=5) ; Set Response Timeout to 10 seconds
|
||||
exten => 12345,n,Playback(demo-enterkeywords,noanswer,us)
|
||||
exten => 12345,n,Answer
|
||||
exten => 12345,n,Wait(2)
|
||||
exten => 12345,n,capicommand(noisesuppressor|yes)
|
||||
exten => 12345,n,Dial(DIALOGICDIVA/ISDN1/100,10,M(capinoisesuppressor))
|
||||
exten => 12345,n,Hangup()
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| clamping |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Used to activate or to deactivate suppression
|
||||
(removal from voice stream) of DTMF tones.
|
||||
|
||||
Direction:
|
||||
Applies to Rx path only.
|
||||
In case of line interconnect can be activated for
|
||||
multiple parties.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware
|
||||
|
||||
Syntax:
|
||||
clamping|N
|
||||
N - estimated duration of DTMF tones to be suppressed in mSec
|
||||
0 - deactivate clamping
|
||||
1 ... 250 - activate clamping
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(clamping|100)
|
||||
s,n,capicommand(clamping|0)
|
||||
|
||||
IVR example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
exten => 1,1,capicommand(clamping|100)
|
||||
exten => 1,n,Goto(s,restart)
|
||||
exten => 2,1,capicommand(clamping|0)
|
||||
exten => 2,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
PBX Example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[macro-capiclamping]
|
||||
exten => s,1,capicommand(clamping|100)
|
||||
|
||||
[isdn-in]
|
||||
exten => 12345,1,Progress()
|
||||
exten => 12345,n,Set(TIMEOUT(digit)=1) ; Set Digit Timeout to 5 seconds
|
||||
exten => 12345,n,Set(TIMEOUT(response)=5) ; Set Response Timeout to 10 seconds
|
||||
exten => 12345,n,Playback(demo-enterkeywords,noanswer,us)
|
||||
exten => 12345,n,Answer
|
||||
exten => 12345,n,Wait(2)
|
||||
exten => 12345,n,capicommand(clamping|100)
|
||||
exten => 12345,n,Dial(DIALOGICDIVA/ISDN1/100,10,M(capiclamping))
|
||||
exten => 12345,n,Hangup()
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| rxagc |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Used to activate or to deactivate Automatic Gain Control (AGC)
|
||||
for Rx direction. AGC level is -6dBm.
|
||||
|
||||
Direction:
|
||||
Applies to Rx path only.
|
||||
In case of line interconnect can be activated for multiple parties.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware.
|
||||
|
||||
Syntax:
|
||||
rxagc|yes,no
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(rxagc|yes)
|
||||
s,n,capicommand(rxagc|no)
|
||||
|
||||
IVR example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
exten => 1,1,capicommand(rxagc|yes)
|
||||
exten => 1,n,Goto(s,restart)
|
||||
exten => 2,1,capicommand(rxagc|no)
|
||||
exten => 2,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
PBX Example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[macro-capirxagc]
|
||||
exten => s,1,capicommand(rxagc|yes)
|
||||
|
||||
[isdn-in]
|
||||
exten => 12345,1,Progress()
|
||||
exten => 12345,n,Set(TIMEOUT(digit)=1) ; Set Digit Timeout to 5 seconds
|
||||
exten => 12345,n,Set(TIMEOUT(response)=5) ; Set Response Timeout to 10 seconds
|
||||
exten => 12345,n,Playback(demo-enterkeywords,noanswer,us)
|
||||
exten => 12345,n,Answer
|
||||
exten => 12345,n,Wait(2)
|
||||
exten => 12345,n,capicommand(rxagc|yes)
|
||||
exten => 12345,n,Dial(DIALOGICDIVA/ISDN1/100,10,M(capirxagc))
|
||||
exten => 12345,n,Hangup()
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| txagc |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Used to activate or to deactivate Automatic Gain Control (AGC)
|
||||
for Tx direction. AGC level is -6 dBm.
|
||||
|
||||
Path:
|
||||
Applies to Tx path only. In case of line interconnect can be activated
|
||||
for multiple parties.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware
|
||||
|
||||
Syntax:
|
||||
txagc|yes,no
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(txagc|yes)
|
||||
s,n,capicommand(txagc|no)
|
||||
|
||||
IVR example:
|
||||
See rxagc
|
||||
|
||||
PBX Example:
|
||||
See rxagc
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| rxdgain |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Used to access Digital Gain Control for Rx direction.
|
||||
Allows to set gain in the range from -127 dBm to +6 dBm.
|
||||
|
||||
Diection:
|
||||
Applies to Rx path only. In case of line interconnect can be activated
|
||||
for multiple parties.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware
|
||||
|
||||
Syntax:
|
||||
rxdgain|N
|
||||
N - gain in dBm, float
|
||||
-127 ... +6 - gain
|
||||
-128 or less - infinite attenuation
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(rxdgain|5.5)
|
||||
s,n,capicommand(rxdgain|-14.2)
|
||||
|
||||
IVR example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
exten => 1,1,capicommand(rxdgain|5.5)
|
||||
exten => 1,n,Goto(s,restart)
|
||||
exten => 2,1,capicommand(rxdgain|-70)
|
||||
exten => 2,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| incrxdgain |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Used to access Digital Gain Control for Rx direction.
|
||||
Allows to change gain in the range from -127 dBm to +6 dBm
|
||||
|
||||
Diection:
|
||||
Applies to Rx path only. In case of line interconnect can be activated
|
||||
for multiple parties.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware
|
||||
|
||||
incSyntax:
|
||||
rxdgain|N
|
||||
N - gain increment in dBm, float
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(incrxdgain|2.5) // add 2.5 dBm to actiall gain
|
||||
s,n,capicommand(incrxdgain|-2.5) // substract 2.5 dBm from actual gain
|
||||
|
||||
IVR example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
exten => 1,1,capicommand(incrxdgain|2.5)
|
||||
exten => 1,n,Goto(s,restart)
|
||||
exten => 2,1,capicommand(incrxdgain|-2.5)
|
||||
exten => 2,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| txdgain |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Used to access Digital Gain Control for Tx direction.
|
||||
Allows to set gain in the range from -127 dBm to +6 dBm.
|
||||
|
||||
Diection:
|
||||
Applies to Tx path only. In case of line interconnect can be activated
|
||||
for multiple parties.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware
|
||||
|
||||
Syntax:
|
||||
txdgain|N
|
||||
N - gain in dBm, float
|
||||
-127 ... +6 - gain
|
||||
-128 or less - infinite attenuation
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(txdgain|5.5)
|
||||
s,n,capicommand(txdgain|-14.2)
|
||||
|
||||
IVR example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
exten => 1,1,capicommand(txdgain|5.5)
|
||||
exten => 1,n,Goto(s,restart)
|
||||
exten => 2,1,capicommand(txdgain|-70)
|
||||
exten => 2,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| inctxdgain |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Used to access Digital Gain Control for Tx direction.
|
||||
Allows to change gain in the range from -127 dBm to +6 dBm
|
||||
|
||||
Diection:
|
||||
Applies to Tx path only. In case of line interconnect can be activated
|
||||
for multiple parties.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware
|
||||
|
||||
incSyntax:
|
||||
rxtgain|N
|
||||
N - gain increment in dBm, float
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(inctxdgain|2.5) // add 2.5 dBm to actiall gain
|
||||
s,n,capicommand(inctxdgain|-2.5) // substract 2.5 dBm from actual gain
|
||||
|
||||
IVR example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
exten => 1,1,capicommand(inctxdgain|2.5)
|
||||
exten => 1,n,Goto(s,restart)
|
||||
exten => 2,1,capicommand(inctxdgain|-2.5)
|
||||
exten => 2,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| pitchcontrol |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Used to set recording (Rx direction) and playback (Tx direction)
|
||||
rate in the range between 1250 ... 51200 Hz.
|
||||
|
||||
Using pitch control this is possible to play (record) voice message faster
|
||||
(rate > 8000 Hz) or slower (rate < 8000 Hz).
|
||||
This is useful if playing voice mail messages and this is necessary to decrease the
|
||||
playback speed to achieve better understanding or to increase playback speed to
|
||||
rewind over the part of voice mail message.
|
||||
|
||||
Diection:
|
||||
Applies to Rx and to Tx path. Can be used only for playback and for
|
||||
recoring of voice data. Not available with line interconnect and RTP.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware
|
||||
|
||||
Syntax:
|
||||
pitchcontrol|RxN|TxN - set Rx and Tx rate to different values
|
||||
pitchcontrol|N - set Rx and Tx rate to same value
|
||||
pitchcontrol - deactivate rate control
|
||||
|
||||
RxN, TxN, N - rate in the range 1250 ... 51200 Hz.
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(pitchcontrol|8200,8100) ; Set Rx rate to 8200 Hz and Tx rate to 8100 Hz
|
||||
s,n,capicommand(pitchcontrol|8400) ; Set Rx and Tx rate to 8400 Hz
|
||||
|
||||
IVR example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
exten => 1,1,capicommand(pitchcontrol|8200)
|
||||
exten => 1,n,Goto(s,restart)
|
||||
exten => 2,1,capicommand(pitchcontrol|8000)
|
||||
exten => 2,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| incpitchcontrol |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Used to change recording (Rx direction) and playback (Tx direction)
|
||||
rate in the range between 1250 ... 51200 Hz.
|
||||
|
||||
Using pitch control this is possible to play (record) voice message faster
|
||||
(rate > 8000 Hz) or slower (rate < 8000 Hz).
|
||||
This is useful if playing voice mail messages and this is necessary to decrease the
|
||||
playback speed to achieve better understanding or to increase playback speed to
|
||||
rewind over the part of voice mail message.
|
||||
|
||||
Diection:
|
||||
Applies to Rx and to Tx path. Can be used only for playback and for
|
||||
recoring of voice data. Not available with line interconnect and RTP.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware
|
||||
|
||||
Syntax:
|
||||
incpitchcontrol|RxN|TxN - change Rx and Tx rate using different values
|
||||
incpitchcontrol|N - change Rx and Tx rate using same value
|
||||
|
||||
RxN, TxN, N - rate change in Hz
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(incpitchcontrol|100) // Increase Rx and Tx rate by 100 Hz
|
||||
s,n,capicommand(incpitchcontrol|-100) // Decrease Rx and Tx rate by 100 Hz
|
||||
|
||||
IVR example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
exten => 1,1,capicommand(incpitchcontrol|100)
|
||||
exten => 1,n,Goto(s,restart)
|
||||
exten => 2,1,capicommand(incpitchcontrol|100)
|
||||
exten => 2,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| mftonedetection |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Used to activate or to deactivate MF listen on B channel data
|
||||
Detected MF tones are mapped to appropriate DTMF digits.
|
||||
MF digits K1, K2, KP, S1 and ST are mapped to DTMF digits
|
||||
A, B, C, D, and * respectively.
|
||||
|
||||
Direction:
|
||||
Applies to Rx path only. In case of line interconnect can be activated
|
||||
for multiple parties.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware
|
||||
|
||||
Syntax:
|
||||
mftonedetection|yes,no
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(mftonedetection|yes)
|
||||
s,n,capicommand(mftonedetection|no)
|
||||
|
||||
IVR example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
exten => 1,1,capicommand(mftonedetection|yes)
|
||||
exten => 1,n,Goto(s,restart)
|
||||
exten => 2,1,capicommand(mftonedetection|no)
|
||||
exten => 2,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| pulsedetection |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Used to activate or to deactivate dial pulse detector.
|
||||
Detected dialing pulses are mapped to appropriate DTMF digits.
|
||||
|
||||
Direction:
|
||||
Applies to Rx path only. In case of line interconnect can be activated
|
||||
for multiple parties.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware
|
||||
|
||||
Syntax:
|
||||
pulsedetection|yes,no
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(pulsedetection|yes)
|
||||
s,n,capicommand(pulsedetection|no)
|
||||
|
||||
IVR example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
exten => 1,1,capicommand(pulsedetection|yes)
|
||||
exten => 1,n,Goto(s,restart)
|
||||
exten => 2,1,capicommand(pulsedetection|no)
|
||||
exten => 2,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| sendtone and stoptone |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Send tone (sendtone) sending of the next tone while one tone is already
|
||||
active will automatically replace the tone to be transmitted with the
|
||||
new one. Sending of the DTMF digits will automatically stop tone transmission.
|
||||
Stop transmission of the tone (stoptone).
|
||||
|
||||
Path:
|
||||
Applies to Tx path only.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware.
|
||||
|
||||
Syntax:
|
||||
sendtone|N
|
||||
stoptone
|
||||
|
||||
N - tone to be sent
|
||||
0x82 - Dial tone
|
||||
0x83 - PABX internal dial tone
|
||||
0x84 - Special dial tone (stutter dial tone
|
||||
0x85 - Second dial tone
|
||||
0x86 - Ringing tone
|
||||
0x87 - Special ringing tone
|
||||
0x88 - Busy tone
|
||||
0x89 - Congestion tone (reorder tone
|
||||
0x8A - Special information tone
|
||||
0x8B - Comfort tone
|
||||
0x8C - Hold tone
|
||||
0x8D - Record tone
|
||||
0x8E - Caller waiting tone
|
||||
0x8F - Call waiting tone
|
||||
0x90 - Pay tone
|
||||
0x91 - Positive indication tone
|
||||
0x92 - Negative indication tone
|
||||
0x93 - Warning tone
|
||||
0x94 - Intrusion tone
|
||||
0x95 - Calling card service tone
|
||||
0x96 - Payphone recognition tone
|
||||
0x97 - CPE alerting signal
|
||||
0x98 - Off hook warning tone
|
||||
0xA0 - Special information tone 0
|
||||
0xA1 - Special information tone 1
|
||||
0xA2 - Special information tone 2
|
||||
0xA3 - Special information tone 3
|
||||
0xA4 - Special information tone (operator intercept)
|
||||
0xA5 - Special information tone (vacant circuit)
|
||||
0xA6 - Special information tone (reorder)
|
||||
0xA7 - Special information tone (no circuit found)
|
||||
0xBF - Intercept tone
|
||||
0xC0 - Modem calling tone
|
||||
0xC1 - FAX calling tone
|
||||
0xC2 - Answer tone
|
||||
0xC3 - Answer tone with phase reversals
|
||||
0xC4 - ANSam
|
||||
0xC5 - ANSam with phase reversals
|
||||
0xC6 - 2225 Hz (Bell 103 answer mode)
|
||||
0xC7 - FAX flags
|
||||
0xC8 - G2 FAX group ID
|
||||
0xCA - Answering Machine Tone (390 Hz)
|
||||
0xCB - Tone Alerting Signal (for Caller ID in PSTN)
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(sendtone|0x83) ; Send PABX internal dial tone
|
||||
s,n,capicommand(stoptone) ; stop tone transmission
|
||||
|
||||
IVR example
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
exten => 1,1,capicommand(sendtone|0x83)
|
||||
exten => 1,n,Goto(s,restart)
|
||||
exten => 2,1,capicommand(stoptone)
|
||||
exten => 2,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| starttonedetection and stoptonedetection |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
Start tone detection (starttonedetection)
|
||||
Stop tone detection (stoptonedetection)
|
||||
|
||||
Direction:
|
||||
Applies to Rx path only. In case of line interconnect can be activated
|
||||
for multiple parties.
|
||||
|
||||
Supported hardware:
|
||||
Requires one equipped with DSP Diva hardware
|
||||
Not available if RTP is active
|
||||
|
||||
Syntax:
|
||||
starttonedetection|N
|
||||
stoptonedetection
|
||||
|
||||
N - extension number to be used in case tone detected.
|
||||
The reception of appropriate DTMF digits will be simulated after the
|
||||
detection of tone. At same time variable CAPIDETECTEDTONE will be set
|
||||
to identifier of detected tone in decimal format and variable
|
||||
CAPIDETECTEDTONEVISUAL will be set to user friendly name of detected tone.
|
||||
|
||||
Tone identifier:
|
||||
0x82 - Dial tone detected
|
||||
0x83 - PABX internal dial tone detected
|
||||
0x84 - Special dial tone (stutter dial tone) detected
|
||||
0x85 - Second dial tone detected
|
||||
0x86 - Ringing tone detected
|
||||
0x87 - Special ringing tone detected
|
||||
0x88 - Busy tone detected
|
||||
0x89 - Congestion tone (reorder tone) detected
|
||||
0x8A - Special information tone detected
|
||||
0x8B - Comfort tone detected
|
||||
0x8C - Hold tone detected
|
||||
0x8D - Record tone detected
|
||||
0x8E - Caller waiting tone detected
|
||||
0x8F - Call waiting tone detected
|
||||
0x90 - Pay tone detected
|
||||
0x91 - Positive indication tone detected
|
||||
0x92 - Negative indication tone detected
|
||||
0x93 - Warning tone detected
|
||||
0x94 - Intrusion tone detected
|
||||
0x95 - Calling card service tone detected
|
||||
0x96 - Payphone recognition tone detected
|
||||
0x97 - CPE alerting signal detected
|
||||
0x98 - Off hook warning tone detected
|
||||
0xA0 - Special information tone 0
|
||||
0xA1 - Special information tone 1
|
||||
0xA2 - Special information tone 2
|
||||
0xA3 - Special information tone 3
|
||||
0xA4 - Special information tone (operator intercept)
|
||||
0xA5 - Special information tone (vacant circuit)
|
||||
0xA6 - Special information tone (reorder)
|
||||
0xA7 - Special information tone (no circuit found)
|
||||
0xBF - Intercept tone detected
|
||||
0xC0 - Modem calling tone detected
|
||||
0xC1 - FAX calling tone detected
|
||||
0xC2 - Answer tone detected
|
||||
0xC3 - Answer tone with phase reversals detected
|
||||
0xC4 - ANSam detected
|
||||
0xC5 - ANSam with phase reversals detected
|
||||
0xC6 - 2225 Hz (Bell 103 answer mode) detected
|
||||
0xC7 - FAX flags detected
|
||||
0xC8 - G2 FAX group ID detected
|
||||
0xC9 - Human speech detected
|
||||
0xCA - Answering Machine Tone (390 Hz) detected
|
||||
0xCB - Tone Alerting Signal detected (for Caller ID in PSTN)
|
||||
|
||||
Syntax example:
|
||||
s,n,capicommand(starttonedetection|98) ; Change to extension 98 after the detection of the tone
|
||||
s,n,capicommand(stoptonedetection) ; Disable detection of the tones
|
||||
|
||||
IVR example:
|
||||
|
||||
In this example extension 98 is used to process detected tones.
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer ; Answer the line
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => s,n(restart),BackGround(demo-instruct) ; Play some instructions
|
||||
exten => s,n,WaitExten ; Wait for an extension to be dialed.
|
||||
|
||||
exten => 1,1,Set(TIMEOUT(digit)=1)
|
||||
exten => 1,n,Set(TIMEOUT(response)=5)
|
||||
exten => 1,n,capicommand(starttonedetection|98) ; Change to 98 once tone is detected
|
||||
exten => 1,n,Goto(s,restart)
|
||||
|
||||
; Continue after detection of the tone
|
||||
exten => 98,1,capicommand(stoptonedetection) ; Stop tone detection
|
||||
exten => 98,n,Set(TESTTONE=${CAPIDETECTEDTONE}) ; Tone identifier
|
||||
exten => 98,n,Set(TESTTONEVISUAL=${CAPIDETECTEDTONEVISUAL}) ; User friendly name
|
||||
exten => 98,n,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
|
||||
exten => 98,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
|
||||
exten => 98,n,Playback(demo-echodone) ; Let them know it's over
|
||||
exten => 98,n,Goto(s,restart)
|
||||
exten => 99,1,Echo
|
||||
exten => i,1,Playback(invalid)
|
||||
exten => i,n,Goto(s,restart)
|
||||
exten => h,1,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
| vc |
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
Description:
|
||||
In the time voice message played back this is usefule to be able to apply
|
||||
media control commands to voice stream without interrupting the playback
|
||||
of the voice stream.
|
||||
The same is true for the conference and for connection between two parties.
|
||||
|
||||
The "vc" command allows to provide this functionality. Using this command
|
||||
it is possible to bind arbitrary chan_capi commands to sequences of
|
||||
events (DTMF digits, ...). Once events are detected the appropriate command
|
||||
is executed without interruption of the voice stream.
|
||||
"vc" allows to create menu which is executing in background and allows to
|
||||
control voice stream by activation or deactivation of AGC, noise suppression,
|
||||
control the level of the signal, playback speed.
|
||||
"vc" allows to use any supported by channel driver command, but please note
|
||||
that commands are executed not in the context of the dial plan. The commands
|
||||
are executed using context of detected events parallel to dialplan and
|
||||
independent from dialplan.
|
||||
|
||||
Syntax:
|
||||
vc|command|key|param|param1|...|paranN
|
||||
Add to menu: on detection of key Execute command using parameters param1|...|paramN
|
||||
|
||||
vc|command|key
|
||||
Add to menu: on detection of key execute command without parameters
|
||||
|
||||
vc|command
|
||||
Remove all instances of command from menu
|
||||
|
||||
vc
|
||||
Clanup menu
|
||||
|
||||
In case one command will use key which is already in use then new command will overwrite
|
||||
one already existing:
|
||||
exten => s,n,capicommand(vc|txagc|3|yes)
|
||||
exten => s,n,capicommand(vc|inctxdgain|3|1.5)
|
||||
|
||||
is equivalent to:
|
||||
|
||||
exten => s,n,capicommand(vc|inctxdgain|3|1.5)
|
||||
|
||||
This is better to use only one digit as key for commands in menu
|
||||
if using menu for IVR and voice mailbox. This provides short response time.
|
||||
|
||||
In case menu is used for conference or for connection between two parties it may be useful to use
|
||||
two or three digits for key. This will prevent one activation by occasional pressing of keys.
|
||||
|
||||
Syntax example:
|
||||
exten => s,n,capicommand(vc|inctxdgain|5|1.5) ; Execute inctxdgain|1.5 if received DTMF digit 5
|
||||
exten => s,n,capicommand(vc|txagc|3|yes) ; Execute txagc|yes if received DTMF digit 3
|
||||
|
||||
IVR Example:
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
[isdn-in]
|
||||
exten => _X.,1,Answer
|
||||
exten => _X.,n,Goto(s,1)
|
||||
exten => s,1,Wait(1)
|
||||
exten => s,n,capicommand(vc|sendtone|1|0x82)
|
||||
exten => s,n,capicommand(vc|stoptone|2)
|
||||
exten => s,n,capicommand(vc|txagc|3|yes)
|
||||
exten => s,n,capicommand(vc|txagc|4|no)
|
||||
exten => s,n,capicommand(vc|inctxdgain|5|1.5)
|
||||
exten => s,n,capicommand(vc|inctxdgain|7|-2.5)
|
||||
exten => s,n,capicommand(vc|incpitchcontrol|8|0|100)
|
||||
exten => s,n,capicommand(vc|incpitchcontrol|9|0|-400)
|
||||
exten => s,n(restart),Playback(demo-instruct)
|
||||
exten => s,n,Goto(s,restart)
|
||||
exten => s,n,Hangup
|
||||
/////////////////////////////////////////////////////////////////////
|
||||
|
Loading…
Reference in New Issue