Heiko Schocher 3887c3fbdb mucmc52, uc101: delete ata@3a00 node, if no CF card is detected ... U-Boot can detect if an IDE device is present or not. If not, and this new config option is activated, U-Boot removes the ATA node from the DTS before booting Linux, so the Linux IDE driver does not probe the device and crash. This is needed for buggy hardware (uc101) where no pull down resistor is connected to the signal IDE5V_DD7. Signed-off-by: Heiko Schocher <hs@denx.de>		2009-09-25 01:22:13 +02:00
..
Makefile	Move MPC5xxx_FEC driver to drivers/net	2008-08-29 13:58:07 -06:00
config.mk	PPC: Use r2 instead of r29 as global data pointer	2008-02-14 22:43:22 +01:00
cpu.c	mucmc52, uc101: delete ata@3a00 node, if no CF card is detected	2009-09-25 01:22:13 +02:00
cpu_init.c	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
firmware_sc_task.impl.S	* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)	2003-07-16 21:53:01 +00:00
firmware_sc_task_bestcomm.impl.S	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
i2c.c	Reset i2c slave devices during init on mpc5xxx cpus	2009-09-06 11:26:04 +02:00
ide.c	board support patch for phyCORE-MPC5200B-tiny	2009-07-10 23:21:32 +02:00
interrupts.c	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
io.S	* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)	2003-07-16 21:53:01 +00:00
loadtask.c	* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)	2003-07-16 21:53:01 +00:00
pci_mpc5200.c	pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity	2009-02-07 23:50:04 +01:00
serial.c	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
speed.c	Use strmhz() to format clock frequencies	2008-10-21 11:25:38 +02:00
start.S	Update U-Boot's build timestamp on every compile	2008-12-06 23:36:43 +01:00
traps.c	cpu/m*: Remove obsolete references to CONFIG_COMMANDS	2007-07-09 19:06:00 -05:00
u-boot-customlayout.lds	Fix all linker script to handle all rodata sections	2009-03-20 22:39:12 +01:00
u-boot.lds	Fix all linker script to handle all rodata sections	2009-03-20 22:39:12 +01:00
usb.c	Add support for USB on PSC3 for the mpc5200	2009-08-25 12:57:55 +02:00
usb_ohci.c	Add support for USB on PSC3 for the mpc5200	2009-08-25 12:57:55 +02:00
usb_ohci.h	Replace __attribute references with __attribute__	2009-04-28 01:01:39 +02:00