uboot-mt623x/arch/powerpc/cpu/ppc4xx
Wolfgang Denk cdb749778a Rename getenv_r() into getenv_f()
While running from flash, i. e. before relocation, we have only a
limited C runtime environment without writable data segment. In this
phase, some configurations (for example with environment in EEPROM)
must not use the normal getenv(), but a special function.  This
function had been called getenv_r(), with the idea that the "_r"
suffix would mean the same as in the _r_eentrant versions of some of
the C library functions (for example getdate vs. getdate_r, getgrent
vs. getgrent_r, etc.).

Unfortunately this was a misleading name, as in U-Boot the "_r"
generally means "running from RAM", i. e. _after_ relocation.

To avoid confusion, rename into getenv_f() [as "running from flash"]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
2010-08-04 00:45:36 +02:00
..
4xx_ibm_ddr2_autocalib.c Rename getenv_r() into getenv_f() 2010-08-04 00:45:36 +02:00
4xx_pci.c ppc4xx: Enable PCIe support without PCI support on PPC440/460 2010-07-01 10:26:01 +02:00
4xx_pcie.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
4xx_uart.c serial: struct serial_device: add uninit() entry for drivers 2010-04-24 21:34:07 +02:00
40x_spd_sdram.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
44x_spd_ddr.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
44x_spd_ddr2.c Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
Makefile ppc4xx: Add "ecctest" command to test/simulate ECC errors 2010-07-23 09:54:54 +02:00
bedbug_405.c Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
cache.S Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
cmd_chip_config.c Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
cmd_ecctest.c ppc4xx: Add "ecctest" command to test/simulate ECC errors 2010-07-23 09:54:54 +02:00
commproc.c powerpc: Consolidate bootcount_{store|load} for PowerPC 2010-05-06 23:28:48 +02:00
config.mk Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
cpu.c Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
cpu_init.c ppc4xx: Enable booting with Option E on 460EX/EXr/GT 2010-07-01 10:25:56 +02:00
dcr.S Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
denali_data_eye.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
denali_spd_ddr2.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
ecc.c ppc4xx: DDR/ECC: Use correct macros to clear error status 2010-07-23 09:54:28 +02:00
ecc.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
fdt.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
gpio.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
interrupts.c Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
iop480_uart.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
kgdb.S Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
miiphy.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
reginfo.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
resetvec.S Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
sdram.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
sdram.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
speed.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
start.S ppc4xx: Cleanup Boot/FLASH TLB reassignment for PPC440/460 2010-07-01 10:26:25 +02:00
tlb.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
traps.c ppc4xx: Add ECC status info to machine-check exception for IBM DDR2 core 2010-07-23 09:55:03 +02:00
u-boot.lds Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
uic.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
usb.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
usb_ohci.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
usb_ohci.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
usbdev.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
usbdev.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
xilinx_irq.c Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00