uboot-mt623x/arch/arm/include/asm/global_data.h

92 lines
3.3 KiB
C

/*
* (C) Copyright 2002-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
/*
* The following data structure is placed in some memory wich is
* available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
* some locked parts of the data cache) to allow for a minimum set of
* global variables during system initialization (until we have set
* up the memory controller so that we can use RAM).
*
* Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
*/
typedef struct global_data {
bd_t *bd;
unsigned long flags;
unsigned long baudrate;
unsigned long have_console; /* serial_init() was called */
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
unsigned long fb_base; /* base address of frame buffer */
#ifdef CONFIG_VFD
unsigned char vfd_type; /* display type */
#endif
#ifdef CONFIG_FSL_ESDHC
unsigned long sdhc_clk;
#endif
#ifdef CONFIG_AT91FAMILY
/* "static data" needed by at91's clock.c */
unsigned long cpu_clk_rate_hz;
unsigned long main_clk_rate_hz;
unsigned long mck_rate_hz;
unsigned long plla_rate_hz;
unsigned long pllb_rate_hz;
unsigned long at91_pllb_usb_init;
/* "static data" needed by at91's timer.c */
unsigned long timer_rate_hz;
unsigned long tbl;
unsigned long tbu;
unsigned long long timer_reset_value;
#endif
unsigned long relocaddr; /* Start address of U-Boot in RAM */
phys_size_t ram_size; /* RAM size */
unsigned long mon_len; /* monitor len */
unsigned long irq_sp; /* irq stack pointer */
unsigned long start_addr_sp; /* start_addr_stackpointer */
unsigned long reloc_off;
#if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE))
unsigned long tlb_addr;
#endif
void **jt; /* jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
} gd_t;
/*
* Global Data Flags
*/
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */
#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */
#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
#define GD_FLG_ENV_READY 0x00080 /* Environment imported into hash table */
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8")
#endif /* __ASM_GBL_DATA_H */