Becky Bruce 2d0daa0361 POWERPC 86xx: Move BAT setup code to C ... This is needed because we will be possibly be locating devices at physical addresses above 32bits, and the asm preprocessing does not appear to deal with ULL constants properly. We now call write_bat in lib_ppc/bat_rw.c. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com>		2008-08-11 23:53:59 +02:00
..
Makefile	86xx: Convert sbc8641d to use libfdt.	2008-02-18 14:01:56 -06:00
cache.S	7450 and 86xx L2 cache invalidate bug corrections	2008-05-09 20:46:48 +02:00
config.mk	PPC: Use r2 instead of r29 as global data pointer	2008-02-14 22:43:22 +01:00
cpu.c	Merge commit 'wd/master'	2008-07-10 12:05:32 -05:00
cpu_init.c	POWERPC 86xx: Move BAT setup code to C	2008-08-11 23:53:59 +02:00
fdt.c	8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq	2008-07-14 18:56:51 -05:00
interrupts.c	Feed the watchdog in u-boot for 8610 board.	2008-07-07 11:29:48 -05:00
spd_sdram.c	85xx/86xx: Move to dynamic mgmt of LAWs	2008-06-11 01:52:23 -05:00
speed.c	Fix calculation of I2C clock for some 86xx chips	2008-04-30 22:52:35 +02:00
start.S	POWERPC 86xx: Move BAT setup code to C	2008-08-11 23:53:59 +02:00
traps.c	Fix some more print() format errors.	2008-07-11 01:16:00 +02:00