785 lines
17 KiB
ArmAsm
785 lines
17 KiB
ArmAsm
/*
|
|
* armboot - Startup Code for ARM1176 CPU-core
|
|
*
|
|
* Copyright (c) 2007 Samsung Electronics
|
|
*
|
|
* Copyright (C) 2008
|
|
* Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
* 2007-09-21 - Restructured codes by jsgood (jsgood.yang@samsung.com)
|
|
* 2007-09-21 - Added MoviNAND and OneNAND boot codes by
|
|
* jsgood (jsgood.yang@samsung.com)
|
|
* Base codes by scsuh (sc.suh)
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#ifdef CONFIG_ENABLE_MMU
|
|
#include <asm/proc/domain.h>
|
|
#endif
|
|
|
|
#if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE)
|
|
#define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE
|
|
#endif
|
|
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* Jump vector table as in table 3.1 in [1]
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
|
|
.globl _start
|
|
_start: b reset
|
|
#ifndef CONFIG_NAND_SPL
|
|
ldr pc, _undefined_instruction
|
|
ldr pc, _software_interrupt
|
|
ldr pc, _prefetch_abort
|
|
ldr pc, _data_abort
|
|
ldr pc, _not_used
|
|
ldr pc, _irq
|
|
ldr pc, _fiq
|
|
|
|
_undefined_instruction:
|
|
.word undefined_instruction
|
|
_software_interrupt:
|
|
.word software_interrupt
|
|
_prefetch_abort:
|
|
.word prefetch_abort
|
|
_data_abort:
|
|
.word data_abort
|
|
_not_used:
|
|
.word not_used
|
|
_irq:
|
|
.word irq
|
|
_fiq:
|
|
.word fiq
|
|
_pad:
|
|
.word 0x12345678 /* now 16*4=64 */
|
|
#else
|
|
. = _start + 64
|
|
#endif
|
|
|
|
.global _end_vect
|
|
_end_vect:
|
|
.balignl 16,0xdeadbeef
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* Startup Code (reset vector)
|
|
*
|
|
* do important init only if we don't start from memory!
|
|
* setup Memory and board specific bits prior to relocation.
|
|
* relocate armboot to ram
|
|
* setup stack
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
|
|
.globl _TEXT_BASE
|
|
_TEXT_BASE:
|
|
.word TEXT_BASE
|
|
|
|
/*
|
|
* Below variable is very important because we use MMU in U-Boot.
|
|
* Without it, we cannot run code correctly before MMU is ON.
|
|
* by scsuh.
|
|
*/
|
|
_TEXT_PHY_BASE:
|
|
.word CONFIG_SYS_PHY_UBOOT_BASE
|
|
|
|
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
|
|
.globl _armboot_start
|
|
_armboot_start:
|
|
.word _start
|
|
#endif
|
|
|
|
/*
|
|
* These are defined in the board-specific linker script.
|
|
*/
|
|
.globl _bss_start
|
|
_bss_start:
|
|
.word __bss_start
|
|
|
|
.globl _bss_end
|
|
_bss_end:
|
|
.word _end
|
|
|
|
#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
|
|
/* IRQ stack memory (calculated at run-time) + 8 bytes */
|
|
.globl IRQ_STACK_START_IN
|
|
IRQ_STACK_START_IN:
|
|
.word 0x0badc0de
|
|
|
|
.globl _datarel_start
|
|
_datarel_start:
|
|
.word __datarel_start
|
|
|
|
.globl _datarelrolocal_start
|
|
_datarelrolocal_start:
|
|
.word __datarelrolocal_start
|
|
|
|
.globl _datarellocal_start
|
|
_datarellocal_start:
|
|
.word __datarellocal_start
|
|
|
|
.globl _datarelro_start
|
|
_datarelro_start:
|
|
.word __datarelro_start
|
|
|
|
.globl _got_start
|
|
_got_start:
|
|
.word __got_start
|
|
|
|
.globl _got_end
|
|
_got_end:
|
|
.word __got_end
|
|
|
|
/*
|
|
* the actual reset code
|
|
*/
|
|
|
|
reset:
|
|
/*
|
|
* set the cpu to SVC32 mode
|
|
*/
|
|
mrs r0, cpsr
|
|
bic r0, r0, #0x3f
|
|
orr r0, r0, #0xd3
|
|
msr cpsr, r0
|
|
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* CPU_init_critical registers
|
|
*
|
|
* setup important registers
|
|
* setup memory timing
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
/*
|
|
* we do sys-critical inits only at reboot,
|
|
* not when booting from ram!
|
|
*/
|
|
cpu_init_crit:
|
|
/*
|
|
* When booting from NAND - it has definitely been a reset, so, no need
|
|
* to flush caches and disable the MMU
|
|
*/
|
|
#ifndef CONFIG_NAND_SPL
|
|
/*
|
|
* flush v4 I/D caches
|
|
*/
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
|
|
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
|
|
|
|
/*
|
|
* disable MMU stuff and caches
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
|
|
bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
|
|
orr r0, r0, #0x00000002 @ set bit 2 (A) Align
|
|
orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
|
|
|
|
/* Prepare to disable the MMU */
|
|
adr r2, mmu_disable_phys
|
|
sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - TEXT_BASE)
|
|
b mmu_disable
|
|
|
|
.align 5
|
|
/* Run in a single cache-line */
|
|
mmu_disable:
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
nop
|
|
nop
|
|
mov pc, r2
|
|
mmu_disable_phys:
|
|
|
|
#ifdef CONFIG_DISABLE_TCM
|
|
/*
|
|
* Disable the TCMs
|
|
*/
|
|
mrc p15, 0, r0, c0, c0, 2 /* Return TCM details */
|
|
cmp r0, #0
|
|
beq skip_tcmdisable
|
|
mov r1, #0
|
|
mov r2, #1
|
|
tst r0, r2
|
|
mcrne p15, 0, r1, c9, c1, 1 /* Disable Instruction TCM if present*/
|
|
tst r0, r2, LSL #16
|
|
mcrne p15, 0, r1, c9, c1, 0 /* Disable Data TCM if present*/
|
|
skip_tcmdisable:
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_PERIPORT_REMAP
|
|
/* Peri port setup */
|
|
ldr r0, =CONFIG_PERIPORT_BASE
|
|
orr r0, r0, #CONFIG_PERIPORT_SIZE
|
|
mcr p15,0,r0,c15,c2,4
|
|
#endif
|
|
|
|
/*
|
|
* Go setup Memory and board specific bits prior to relocation.
|
|
*/
|
|
bl lowlevel_init /* go setup pll,mux,memory */
|
|
|
|
/* Set stackpointer in internal RAM to call board_init_f */
|
|
call_board_init_f:
|
|
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
|
|
ldr r0,=0x00000000
|
|
bl board_init_f
|
|
|
|
/*------------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* void relocate_code (addr_sp, gd, addr_moni)
|
|
*
|
|
* This "function" does not return, instead it continues in RAM
|
|
* after relocating the monitor code.
|
|
*
|
|
*/
|
|
.globl relocate_code
|
|
relocate_code:
|
|
mov r4, r0 /* save addr_sp */
|
|
mov r5, r1 /* save addr of gd */
|
|
mov r6, r2 /* save addr of destination */
|
|
mov r7, r2 /* save addr of destination */
|
|
|
|
/* Set up the stack */
|
|
stack_setup:
|
|
mov sp, r4
|
|
|
|
adr r0, _start
|
|
ldr r2, _TEXT_BASE
|
|
ldr r3, _bss_start
|
|
sub r2, r3, r2 /* r2 <- size of armboot */
|
|
add r2, r0, r2 /* r2 <- source end address */
|
|
cmp r0, r6
|
|
beq clear_bss
|
|
|
|
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
|
|
copy_loop:
|
|
ldmia r0!, {r9-r10} /* copy from source address [r0] */
|
|
stmia r6!, {r9-r10} /* copy to target address [r1] */
|
|
cmp r0, r2 /* until source end addreee [r2] */
|
|
ble copy_loop
|
|
|
|
#ifndef CONFIG_PRELOADER
|
|
/* fix got entries */
|
|
ldr r1, _TEXT_BASE /* Text base */
|
|
mov r0, r7 /* reloc addr */
|
|
ldr r2, _got_start /* addr in Flash */
|
|
ldr r3, _got_end /* addr in Flash */
|
|
sub r3, r3, r1
|
|
add r3, r3, r0
|
|
sub r2, r2, r1
|
|
add r2, r2, r0
|
|
|
|
fixloop:
|
|
ldr r4, [r2]
|
|
sub r4, r4, r1
|
|
add r4, r4, r0
|
|
str r4, [r2]
|
|
add r2, r2, #4
|
|
cmp r2, r3
|
|
bne fixloop
|
|
#endif
|
|
#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
|
|
|
|
#ifdef CONFIG_ENABLE_MMU
|
|
enable_mmu:
|
|
/* enable domain access */
|
|
ldr r5, =0x0000ffff
|
|
mcr p15, 0, r5, c3, c0, 0 /* load domain access register */
|
|
|
|
/* Set the TTB register */
|
|
ldr r0, _mmu_table_base
|
|
ldr r1, =CONFIG_SYS_PHY_UBOOT_BASE
|
|
ldr r2, =0xfff00000
|
|
bic r0, r0, r2
|
|
orr r1, r0, r1
|
|
mcr p15, 0, r1, c2, c0, 0
|
|
|
|
/* Enable the MMU */
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
orr r0, r0, #1 /* Set CR_M to enable MMU */
|
|
|
|
/* Prepare to enable the MMU */
|
|
adr r1, skip_hw_init
|
|
and r1, r1, #0x3fc
|
|
ldr r2, _TEXT_BASE
|
|
ldr r3, =0xfff00000
|
|
and r2, r2, r3
|
|
orr r2, r2, r1
|
|
b mmu_enable
|
|
|
|
.align 5
|
|
/* Run in a single cache-line */
|
|
mmu_enable:
|
|
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
nop
|
|
nop
|
|
mov pc, r2
|
|
skip_hw_init:
|
|
#endif
|
|
|
|
clear_bss:
|
|
#ifndef CONFIG_PRELOADER
|
|
ldr r0, _bss_start
|
|
ldr r1, _bss_end
|
|
ldr r3, _TEXT_BASE /* Text base */
|
|
mov r4, r7 /* reloc addr */
|
|
sub r0, r0, r3
|
|
add r0, r0, r4
|
|
sub r1, r1, r3
|
|
add r1, r1, r4
|
|
mov r2, #0x00000000 /* clear */
|
|
|
|
clbss_l:str r2, [r0] /* clear loop... */
|
|
add r0, r0, #4
|
|
cmp r0, r1
|
|
bne clbss_l
|
|
|
|
bl coloured_LED_init
|
|
bl red_LED_on
|
|
#endif
|
|
|
|
/*
|
|
* We are done. Do not return, instead branch to second part of board
|
|
* initialization, now running from RAM.
|
|
*/
|
|
#ifdef CONFIG_NAND_SPL
|
|
ldr pc, _nand_boot
|
|
|
|
_nand_boot: .word nand_boot
|
|
#else
|
|
ldr r0, _TEXT_BASE
|
|
ldr r2, _board_init_r
|
|
sub r2, r2, r0
|
|
add r2, r2, r7 /* position from board_init_r in RAM */
|
|
/* setup parameters for board_init_r */
|
|
mov r0, r5 /* gd_t */
|
|
mov r1, r7 /* dest_addr */
|
|
/* jump to it ... */
|
|
mov lr, r2
|
|
mov pc, lr
|
|
|
|
_board_init_r: .word board_init_r
|
|
#endif
|
|
|
|
#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
|
|
|
|
/*
|
|
* the actual reset code
|
|
*/
|
|
|
|
reset:
|
|
/*
|
|
* set the cpu to SVC32 mode
|
|
*/
|
|
mrs r0, cpsr
|
|
bic r0, r0, #0x3f
|
|
orr r0, r0, #0xd3
|
|
msr cpsr, r0
|
|
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* CPU_init_critical registers
|
|
*
|
|
* setup important registers
|
|
* setup memory timing
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
/*
|
|
* we do sys-critical inits only at reboot,
|
|
* not when booting from ram!
|
|
*/
|
|
cpu_init_crit:
|
|
/*
|
|
* When booting from NAND - it has definitely been a reset, so, no need
|
|
* to flush caches and disable the MMU
|
|
*/
|
|
#ifndef CONFIG_NAND_SPL
|
|
/*
|
|
* flush v4 I/D caches
|
|
*/
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
|
|
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
|
|
|
|
/*
|
|
* disable MMU stuff and caches
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
|
|
bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
|
|
orr r0, r0, #0x00000002 @ set bit 2 (A) Align
|
|
orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
|
|
|
|
/* Prepare to disable the MMU */
|
|
adr r2, mmu_disable_phys
|
|
sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - TEXT_BASE)
|
|
b mmu_disable
|
|
|
|
.align 5
|
|
/* Run in a single cache-line */
|
|
mmu_disable:
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
nop
|
|
nop
|
|
mov pc, r2
|
|
mmu_disable_phys:
|
|
|
|
#ifdef CONFIG_DISABLE_TCM
|
|
/*
|
|
* Disable the TCMs
|
|
*/
|
|
mrc p15, 0, r0, c0, c0, 2 /* Return TCM details */
|
|
cmp r0, #0
|
|
beq skip_tcmdisable
|
|
mov r1, #0
|
|
mov r2, #1
|
|
tst r0, r2
|
|
mcrne p15, 0, r1, c9, c1, 1 /* Disable Instruction TCM if present*/
|
|
tst r0, r2, LSL #16
|
|
mcrne p15, 0, r1, c9, c1, 0 /* Disable Data TCM if present*/
|
|
skip_tcmdisable:
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_PERIPORT_REMAP
|
|
/* Peri port setup */
|
|
ldr r0, =CONFIG_PERIPORT_BASE
|
|
orr r0, r0, #CONFIG_PERIPORT_SIZE
|
|
mcr p15,0,r0,c15,c2,4
|
|
#endif
|
|
|
|
/*
|
|
* Go setup Memory and board specific bits prior to relocation.
|
|
*/
|
|
bl lowlevel_init /* go setup pll,mux,memory */
|
|
|
|
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
|
|
relocate: /* relocate U-Boot to RAM */
|
|
adr r0, _start /* r0 <- current position of code */
|
|
ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
|
|
cmp r0, r1 /* don't reloc during debug */
|
|
beq stack_setup
|
|
|
|
ldr r2, _armboot_start
|
|
ldr r3, _bss_start
|
|
sub r2, r3, r2 /* r2 <- size of armboot */
|
|
add r2, r0, r2 /* r2 <- source end address */
|
|
|
|
copy_loop:
|
|
ldmia r0!, {r3-r10} /* copy from source address [r0] */
|
|
stmia r1!, {r3-r10} /* copy to target address [r1] */
|
|
cmp r0, r2 /* until source end addreee [r2] */
|
|
ble copy_loop
|
|
#endif /* CONFIG_SKIP_RELOCATE_UBOOT */
|
|
|
|
#ifdef CONFIG_ENABLE_MMU
|
|
enable_mmu:
|
|
/* enable domain access */
|
|
ldr r5, =0x0000ffff
|
|
mcr p15, 0, r5, c3, c0, 0 /* load domain access register */
|
|
|
|
/* Set the TTB register */
|
|
ldr r0, _mmu_table_base
|
|
ldr r1, =CONFIG_SYS_PHY_UBOOT_BASE
|
|
ldr r2, =0xfff00000
|
|
bic r0, r0, r2
|
|
orr r1, r0, r1
|
|
mcr p15, 0, r1, c2, c0, 0
|
|
|
|
/* Enable the MMU */
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
orr r0, r0, #1 /* Set CR_M to enable MMU */
|
|
|
|
/* Prepare to enable the MMU */
|
|
adr r1, skip_hw_init
|
|
and r1, r1, #0x3fc
|
|
ldr r2, _TEXT_BASE
|
|
ldr r3, =0xfff00000
|
|
and r2, r2, r3
|
|
orr r2, r2, r1
|
|
b mmu_enable
|
|
|
|
.align 5
|
|
/* Run in a single cache-line */
|
|
mmu_enable:
|
|
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
nop
|
|
nop
|
|
mov pc, r2
|
|
skip_hw_init:
|
|
#endif
|
|
|
|
/* Set up the stack */
|
|
stack_setup:
|
|
ldr r0, =CONFIG_SYS_UBOOT_BASE /* base of copy in DRAM */
|
|
sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */
|
|
sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */
|
|
sub sp, r0, #12 /* leave 3 words for abort-stack */
|
|
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
|
|
|
|
clear_bss:
|
|
ldr r0, _bss_start /* find start of bss segment */
|
|
ldr r1, _bss_end /* stop here */
|
|
mov r2, #0 /* clear */
|
|
|
|
clbss_l:
|
|
str r2, [r0] /* clear loop... */
|
|
add r0, r0, #4
|
|
cmp r0, r1
|
|
ble clbss_l
|
|
|
|
#ifndef CONFIG_NAND_SPL
|
|
ldr pc, _start_armboot
|
|
|
|
_start_armboot:
|
|
.word start_armboot
|
|
#else
|
|
b nand_boot
|
|
/* .word nand_boot*/
|
|
#endif
|
|
|
|
#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
|
|
|
|
#ifdef CONFIG_ENABLE_MMU
|
|
_mmu_table_base:
|
|
.word mmu_table
|
|
#endif
|
|
|
|
#ifndef CONFIG_NAND_SPL
|
|
/*
|
|
* we assume that cache operation is done before. (eg. cleanup_before_linux())
|
|
* actually, we don't need to do anything about cache if not use d-cache in
|
|
* U-Boot. So, in this function we clean only MMU. by scsuh
|
|
*
|
|
* void theLastJump(void *kernel, int arch_num, uint boot_params);
|
|
*/
|
|
#ifdef CONFIG_ENABLE_MMU
|
|
.globl theLastJump
|
|
theLastJump:
|
|
mov r9, r0
|
|
ldr r3, =0xfff00000
|
|
ldr r4, _TEXT_PHY_BASE
|
|
adr r5, phy_last_jump
|
|
bic r5, r5, r3
|
|
orr r5, r5, r4
|
|
mov pc, r5
|
|
phy_last_jump:
|
|
/*
|
|
* disable MMU stuff
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */
|
|
bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */
|
|
orr r0, r0, #0x00000002 /* set bit 2 (A) Align */
|
|
orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
|
|
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
|
|
|
|
mov r0, #0
|
|
mov pc, r9
|
|
#endif
|
|
|
|
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* Interrupt handling
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
@
|
|
@ IRQ stack frame.
|
|
@
|
|
#define S_FRAME_SIZE 72
|
|
|
|
#define S_OLD_R0 68
|
|
#define S_PSR 64
|
|
#define S_PC 60
|
|
#define S_LR 56
|
|
#define S_SP 52
|
|
|
|
#define S_IP 48
|
|
#define S_FP 44
|
|
#define S_R10 40
|
|
#define S_R9 36
|
|
#define S_R8 32
|
|
#define S_R7 28
|
|
#define S_R6 24
|
|
#define S_R5 20
|
|
#define S_R4 16
|
|
#define S_R3 12
|
|
#define S_R2 8
|
|
#define S_R1 4
|
|
#define S_R0 0
|
|
|
|
#define MODE_SVC 0x13
|
|
#define I_BIT 0x80
|
|
|
|
/*
|
|
* use bad_save_user_regs for abort/prefetch/undef/swi ...
|
|
*/
|
|
|
|
.macro bad_save_user_regs
|
|
/* carve out a frame on current user stack */
|
|
sub sp, sp, #S_FRAME_SIZE
|
|
/* Save user registers (now in svc mode) r0-r12 */
|
|
stmia sp, {r0 - r12}
|
|
|
|
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
|
|
ldr r2, _armboot_start
|
|
sub r2, r2, #(CONFIG_SYS_MALLOC_LEN)
|
|
/* set base 2 words into abort stack */
|
|
sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)
|
|
#else
|
|
ldr r2, IRQ_STACK_START_IN
|
|
#endif
|
|
/* get values for "aborted" pc and cpsr (into parm regs) */
|
|
ldmia r2, {r2 - r3}
|
|
/* grab pointer to old stack */
|
|
add r0, sp, #S_FRAME_SIZE
|
|
|
|
add r5, sp, #S_SP
|
|
mov r1, lr
|
|
/* save sp_SVC, lr_SVC, pc, cpsr */
|
|
stmia r5, {r0 - r3}
|
|
/* save current stack into r0 (param register) */
|
|
mov r0, sp
|
|
.endm
|
|
|
|
.macro get_bad_stack
|
|
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
|
|
/* setup our mode stack (enter in banked mode) */
|
|
ldr r13, _armboot_start
|
|
/* move past malloc pool */
|
|
sub r13, r13, #(CONFIG_SYS_MALLOC_LEN)
|
|
/* move to reserved a couple spots for abort stack */
|
|
sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8)
|
|
#else
|
|
ldr r13, IRQ_STACK_START_IN @ setup our mode stack
|
|
#endif
|
|
|
|
/* save caller lr in position 0 of saved stack */
|
|
str lr, [r13]
|
|
/* get the spsr */
|
|
mrs lr, spsr
|
|
/* save spsr in position 1 of saved stack */
|
|
str lr, [r13, #4]
|
|
|
|
/* prepare SVC-Mode */
|
|
mov r13, #MODE_SVC
|
|
@ msr spsr_c, r13
|
|
/* switch modes, make sure moves will execute */
|
|
msr spsr, r13
|
|
/* capture return pc */
|
|
mov lr, pc
|
|
/* jump to next instruction & switch modes. */
|
|
movs pc, lr
|
|
.endm
|
|
|
|
.macro get_bad_stack_swi
|
|
/* space on current stack for scratch reg. */
|
|
sub r13, r13, #4
|
|
/* save R0's value. */
|
|
str r0, [r13]
|
|
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
|
|
/* get data regions start */
|
|
ldr r0, _armboot_start
|
|
/* move past malloc pool */
|
|
sub r0, r0, #(CONFIG_SYS_MALLOC_LEN)
|
|
/* move past gbl and a couple spots for abort stack */
|
|
sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8)
|
|
#else
|
|
ldr r13, IRQ_STACK_START_IN @ setup our mode stack
|
|
#endif
|
|
/* save caller lr in position 0 of saved stack */
|
|
str lr, [r0]
|
|
/* get the spsr */
|
|
mrs r0, spsr
|
|
/* save spsr in position 1 of saved stack */
|
|
str lr, [r0, #4]
|
|
/* restore r0 */
|
|
ldr r0, [r13]
|
|
/* pop stack entry */
|
|
add r13, r13, #4
|
|
.endm
|
|
|
|
/*
|
|
* exception handlers
|
|
*/
|
|
.align 5
|
|
undefined_instruction:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_undefined_instruction
|
|
|
|
.align 5
|
|
software_interrupt:
|
|
get_bad_stack_swi
|
|
bad_save_user_regs
|
|
bl do_software_interrupt
|
|
|
|
.align 5
|
|
prefetch_abort:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_prefetch_abort
|
|
|
|
.align 5
|
|
data_abort:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_data_abort
|
|
|
|
.align 5
|
|
not_used:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_not_used
|
|
|
|
.align 5
|
|
irq:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_irq
|
|
|
|
.align 5
|
|
fiq:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_fiq
|
|
#endif /* CONFIG_NAND_SPL */
|