From f348ab85f741dc98b2d202c04b5f430eace94925 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 24 Apr 2009 17:22:40 -0400 Subject: [PATCH] Blackfin: convert specific pre/post config headers to common method The Blackfin port was using asm/blackfin-config-{pre,post}.h to setup common Blackfin board defines. The common method now is to use config.h, so convert blackfin-config-post.h to that. Rename the still Blackfin specific blackfin-config-pre.h to config-pre.h so the naming conventions at least line up. Signed-off-by: Mike Frysinger --- include/asm-blackfin/blackfin-config-post.h | 149 ---------------- .../{blackfin-config-pre.h => config-pre.h} | 4 +- include/asm-blackfin/config.h | 159 ++++++++++++++++-- include/configs/bf518f-ezbrd.h | 4 +- include/configs/bf526-ezbrd.h | 4 +- include/configs/bf527-ezkit.h | 4 +- include/configs/bf533-ezkit.h | 4 +- include/configs/bf533-stamp.h | 4 +- include/configs/bf537-minotaur.h | 5 +- include/configs/bf537-pnav.h | 4 +- include/configs/bf537-srv1.h | 5 +- include/configs/bf537-stamp.h | 4 +- include/configs/bf538f-ezkit.h | 4 +- include/configs/bf548-ezkit.h | 4 +- include/configs/bf561-ezkit.h | 6 +- include/configs/blackstamp.h | 4 +- include/configs/cm-bf527.h | 4 +- include/configs/cm-bf533.h | 4 +- include/configs/cm-bf537e.h | 4 +- include/configs/cm-bf548.h | 4 +- include/configs/cm-bf561.h | 4 +- include/configs/ibf-dsp561.h | 6 +- include/configs/tcm-bf537.h | 3 +- 23 files changed, 166 insertions(+), 231 deletions(-) delete mode 100644 include/asm-blackfin/blackfin-config-post.h rename include/asm-blackfin/{blackfin-config-pre.h => config-pre.h} (95%) diff --git a/include/asm-blackfin/blackfin-config-post.h b/include/asm-blackfin/blackfin-config-post.h deleted file mode 100644 index 623fdc74c..000000000 --- a/include/asm-blackfin/blackfin-config-post.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * blackfin-config-post.h - setup common defines for Blackfin boards based on config.h - * - * Copyright (c) 2007-2008 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __ASM_BLACKFIN_CONFIG_POST_H__ -#define __ASM_BLACKFIN_CONFIG_POST_H__ - -/* Sanity check CONFIG_BFIN_CPU */ -#ifndef CONFIG_BFIN_CPU -# error CONFIG_BFIN_CPU: your board config needs to define this -#endif - -/* Make sure the structure is properly aligned */ -#if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR) -# error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned -#endif - -/* Set default CONFIG_VCO_HZ if need be */ -#if !defined(CONFIG_VCO_HZ) -# if (CONFIG_CLKIN_HALF == 0) -# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -# else -# define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / 2) -# endif -#endif - -/* Set default CONFIG_CCLK_HZ if need be */ -#if !defined(CONFIG_CCLK_HZ) -# if (CONFIG_PLL_BYPASS == 0) -# define CONFIG_CCLK_HZ (CONFIG_VCO_HZ / CONFIG_CCLK_DIV) -# else -# define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -# endif -#endif - -/* Set default CONFIG_SCLK_HZ if need be */ -#if !defined(CONFIG_SCLK_HZ) -# if (CONFIG_PLL_BYPASS == 0) -# define CONFIG_SCLK_HZ (CONFIG_VCO_HZ / CONFIG_SCLK_DIV) -# else -# define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -# endif -#endif - -/* Since we use these to program PLL registers directly, - * make sure the values are sane and won't screw us up. - */ -#if (CONFIG_VCO_MULT & 0x3F) != CONFIG_VCO_MULT -# error CONFIG_VCO_MULT: Invalid value: must fit in 6 bits (0 - 63) -#endif -#if (CONFIG_CLKIN_HALF & 0x1) != CONFIG_CLKIN_HALF -# error CONFIG_CLKIN_HALF: Invalid value: must be 0 or 1 -#endif -#if (CONFIG_PLL_BYPASS & 0x1) != CONFIG_PLL_BYPASS -# error CONFIG_PLL_BYPASS: Invalid value: must be 0 or 1 -#endif - -/* Using L1 scratch pad makes sense for everyone by default. */ -#ifndef CONFIG_LINUX_CMDLINE_ADDR -# define CONFIG_LINUX_CMDLINE_ADDR L1_SRAM_SCRATCH -#endif -#ifndef CONFIG_LINUX_CMDLINE_SIZE -# define CONFIG_LINUX_CMDLINE_SIZE L1_SRAM_SCRATCH_SIZE -#endif - -/* Set default SPI flash CS to the one we boot from */ -#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_SPI_CS) -# define CONFIG_ENV_SPI_CS BFIN_BOOT_SPI_SSEL -#endif - -/* Default/common Blackfin memory layout */ -#ifndef CONFIG_SYS_SDRAM_BASE -# define CONFIG_SYS_SDRAM_BASE 0 -#endif -#ifndef CONFIG_SYS_MAX_RAM_SIZE -# define CONFIG_SYS_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) -#endif -#ifndef CONFIG_SYS_MONITOR_BASE -# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN) -#endif -#ifndef CONFIG_SYS_MALLOC_BASE -# define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) -#endif -#ifndef CONFIG_SYS_GBL_DATA_SIZE -# define CONFIG_SYS_GBL_DATA_SIZE (128) -#endif -#ifndef CONFIG_SYS_GBL_DATA_ADDR -# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) -#endif -#ifndef CONFIG_STACKBASE -# define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4) -#endif -#ifndef CONFIG_SYS_MEMTEST_START -# define CONFIG_SYS_MEMTEST_START 0 -#endif -#ifndef CONFIG_SYS_MEMTEST_END -# define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 8192 + 4) -#endif - -/* Check to make sure everything fits in external RAM */ -#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE) -# error Memory Map does not fit into configuration -#endif - -/* Default/common Blackfin environment settings */ -#ifndef CONFIG_LOADADDR -# define CONFIG_LOADADDR 0x1000000 -#endif -#ifndef CONFIG_SYS_LOAD_ADDR -# define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#endif -#ifndef CONFIG_SYS_BOOTM_LEN -# define CONFIG_SYS_BOOTM_LEN 0x4000000 -#endif -#ifndef CONFIG_SYS_PROMPT -# define CONFIG_SYS_PROMPT "bfin> " -#endif -#ifndef CONFIG_SYS_CBSIZE -# ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024 -# else -# define CONFIG_SYS_CBSIZE 256 -# endif -#endif -#ifndef CONFIG_SYS_BARGSIZE -# define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#endif -#ifndef CONFIG_SYS_PBSIZE -# define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#endif -#ifndef CONFIG_SYS_MAXARGS -# define CONFIG_SYS_MAXARGS 16 -#endif -#if defined(CONFIG_SYS_HZ) -# if (CONFIG_SYS_HZ != 1000) -# warning "CONFIG_SYS_HZ must always be 1000" -# endif -# undef CONFIG_SYS_HZ -#endif -#define CONFIG_SYS_HZ 1000 -#ifndef CONFIG_SYS_BAUDRATE_TABLE -# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#endif - -#endif diff --git a/include/asm-blackfin/blackfin-config-pre.h b/include/asm-blackfin/config-pre.h similarity index 95% rename from include/asm-blackfin/blackfin-config-pre.h rename to include/asm-blackfin/config-pre.h index 44f9c2fe6..b1d3a946d 100644 --- a/include/asm-blackfin/blackfin-config-pre.h +++ b/include/asm-blackfin/config-pre.h @@ -1,7 +1,7 @@ /* - * blackfin-config-pre.h - common defines for Blackfin boards in config.h + * config-pre.h - common defines for Blackfin boards in config.h * - * Copyright (c) 2007 Analog Devices Inc. + * Copyright (c) 2007-2009 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ diff --git a/include/asm-blackfin/config.h b/include/asm-blackfin/config.h index 049c44eaf..6623fb7ae 100644 --- a/include/asm-blackfin/config.h +++ b/include/asm-blackfin/config.h @@ -1,24 +1,149 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * config.h - setup common defines for Blackfin boards based on config.h * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Copyright (c) 2007-2009 Analog Devices Inc. * + * Licensed under the GPL-2 or later. */ -#ifndef _ASM_CONFIG_H_ -#define _ASM_CONFIG_H_ +#ifndef __ASM_BLACKFIN_CONFIG_POST_H__ +#define __ASM_BLACKFIN_CONFIG_POST_H__ + +/* Sanity check CONFIG_BFIN_CPU */ +#ifndef CONFIG_BFIN_CPU +# error CONFIG_BFIN_CPU: your board config needs to define this +#endif + +/* Make sure the structure is properly aligned */ +#if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR) +# error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned +#endif + +/* Set default CONFIG_VCO_HZ if need be */ +#if !defined(CONFIG_VCO_HZ) +# if (CONFIG_CLKIN_HALF == 0) +# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) +# else +# define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / 2) +# endif +#endif + +/* Set default CONFIG_CCLK_HZ if need be */ +#if !defined(CONFIG_CCLK_HZ) +# if (CONFIG_PLL_BYPASS == 0) +# define CONFIG_CCLK_HZ (CONFIG_VCO_HZ / CONFIG_CCLK_DIV) +# else +# define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +# endif +#endif + +/* Set default CONFIG_SCLK_HZ if need be */ +#if !defined(CONFIG_SCLK_HZ) +# if (CONFIG_PLL_BYPASS == 0) +# define CONFIG_SCLK_HZ (CONFIG_VCO_HZ / CONFIG_SCLK_DIV) +# else +# define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +# endif +#endif + +/* Since we use these to program PLL registers directly, + * make sure the values are sane and won't screw us up. + */ +#if (CONFIG_VCO_MULT & 0x3F) != CONFIG_VCO_MULT +# error CONFIG_VCO_MULT: Invalid value: must fit in 6 bits (0 - 63) +#endif +#if (CONFIG_CLKIN_HALF & 0x1) != CONFIG_CLKIN_HALF +# error CONFIG_CLKIN_HALF: Invalid value: must be 0 or 1 +#endif +#if (CONFIG_PLL_BYPASS & 0x1) != CONFIG_PLL_BYPASS +# error CONFIG_PLL_BYPASS: Invalid value: must be 0 or 1 +#endif + +/* Using L1 scratch pad makes sense for everyone by default. */ +#ifndef CONFIG_LINUX_CMDLINE_ADDR +# define CONFIG_LINUX_CMDLINE_ADDR L1_SRAM_SCRATCH +#endif +#ifndef CONFIG_LINUX_CMDLINE_SIZE +# define CONFIG_LINUX_CMDLINE_SIZE L1_SRAM_SCRATCH_SIZE +#endif + +/* Set default SPI flash CS to the one we boot from */ +#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_SPI_CS) +# define CONFIG_ENV_SPI_CS BFIN_BOOT_SPI_SSEL +#endif + +/* Default/common Blackfin memory layout */ +#ifndef CONFIG_SYS_SDRAM_BASE +# define CONFIG_SYS_SDRAM_BASE 0 +#endif +#ifndef CONFIG_SYS_MAX_RAM_SIZE +# define CONFIG_SYS_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) +#endif +#ifndef CONFIG_SYS_MONITOR_BASE +# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN) +#endif +#ifndef CONFIG_SYS_MALLOC_BASE +# define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) +#endif +#ifndef CONFIG_SYS_GBL_DATA_SIZE +# define CONFIG_SYS_GBL_DATA_SIZE (128) +#endif +#ifndef CONFIG_SYS_GBL_DATA_ADDR +# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) +#endif +#ifndef CONFIG_STACKBASE +# define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4) +#endif +#ifndef CONFIG_SYS_MEMTEST_START +# define CONFIG_SYS_MEMTEST_START 0 +#endif +#ifndef CONFIG_SYS_MEMTEST_END +# define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 8192 + 4) +#endif + +/* Check to make sure everything fits in external RAM */ +#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE) +# error Memory Map does not fit into configuration +#endif + +/* Default/common Blackfin environment settings */ +#ifndef CONFIG_LOADADDR +# define CONFIG_LOADADDR 0x1000000 +#endif +#ifndef CONFIG_SYS_LOAD_ADDR +# define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#endif +#ifndef CONFIG_SYS_BOOTM_LEN +# define CONFIG_SYS_BOOTM_LEN 0x4000000 +#endif +#ifndef CONFIG_SYS_PROMPT +# define CONFIG_SYS_PROMPT "bfin> " +#endif +#ifndef CONFIG_SYS_CBSIZE +# ifdef CONFIG_CMD_KGDB +# define CONFIG_SYS_CBSIZE 1024 +# else +# define CONFIG_SYS_CBSIZE 256 +# endif +#endif +#ifndef CONFIG_SYS_BARGSIZE +# define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#endif +#ifndef CONFIG_SYS_PBSIZE +# define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#endif +#ifndef CONFIG_SYS_MAXARGS +# define CONFIG_SYS_MAXARGS 16 +#endif +#if defined(CONFIG_SYS_HZ) +# if (CONFIG_SYS_HZ != 1000) +# warning "CONFIG_SYS_HZ must always be 1000" +# endif +# undef CONFIG_SYS_HZ +#endif +#define CONFIG_SYS_HZ 1000 +#ifndef CONFIG_SYS_BAUDRATE_TABLE +# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#endif #endif diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 06f2765a0..590ebbab7 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_BF518F_EZBRD_H__ #define __CONFIG_BF518F_EZBRD_H__ -#include +#include /* @@ -143,6 +143,4 @@ */ #include -#include - #endif diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index afd9bb225..db68a7b1a 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_BF526_EZBRD_H__ #define __CONFIG_BF526_EZBRD_H__ -#include +#include /* @@ -185,6 +185,4 @@ void __led_toggle(led_id_t mask); */ #include -#include - #endif diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 0fe5fa53f..f481c7914 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_BF527_EZKIT_H__ #define __CONFIG_BF527_EZKIT_H__ -#include +#include /* @@ -167,6 +167,4 @@ */ #include -#include - #endif diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index eb0889078..f896cb07a 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_BF533_EZKIT_H__ #define __CONFIG_BF533_EZKIT_H__ -#include +#include /* @@ -152,6 +152,4 @@ */ #include -#include - #endif diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index d8e1ffc1d..242bf5a4e 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_BF533_STAMP_H__ #define __CONFIG_BF533_STAMP_H__ -#include +#include /* @@ -241,6 +241,4 @@ void __led_toggle(led_id_t mask); */ #include -#include - #endif diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 351aebb33..b01197b59 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -18,7 +18,7 @@ #ifndef __CONFIG_BF537_MINOTAUR_H__ #define __CONFIG_BF537_MINOTAUR_H__ -#include +#include /* @@ -198,7 +198,4 @@ "ramargs=setenv bootargs " CONFIG_BOOTARGS "\0" \ BOOT_ENV_SETTINGS - -#include - #endif diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index 11baec8a8..c8a59ab57 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_BF537_PNAV_H__ #define __CONFIG_BF537_PNAV_H__ -#include +#include /* @@ -167,6 +167,4 @@ */ #include -#include - #endif diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index 1d0b69445..c1bff3ee2 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -18,7 +18,7 @@ #ifndef __CONFIG_BF537_SRV1_H__ #define __CONFIG_BF537_SRV1_H__ -#include +#include /* @@ -198,7 +198,4 @@ "ramargs=setenv bootargs " CONFIG_BOOTARGS "\0" \ BOOT_ENV_SETTINGS - -#include - #endif diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 3e5862d13..a8c5b9177 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_BF537_STAMP_H__ #define __CONFIG_BF537_STAMP_H__ -#include +#include /* @@ -257,6 +257,4 @@ */ #include -#include - #endif diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index a7fb92e62..f719accbf 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_BF538F_EZKIT_H__ #define __CONFIG_BF538F_EZKIT_H__ -#include +#include /* @@ -134,6 +134,4 @@ */ #include -#include - #endif diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index ae9fb3674..4e2ee627a 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_BF548_EZKIT_H__ #define __CONFIG_BF548_EZKIT_H__ -#include +#include /* @@ -206,6 +206,4 @@ */ #include -#include - #endif diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index ef2019f39..e7cfc8a40 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_BF561_EZKIT_H__ #define __CONFIG_BF561_EZKIT_H__ -#include +#include /* @@ -149,6 +149,4 @@ */ #include -#include - -#endif /* __CONFIG_EZKIT561_H__ */ +#endif diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index f61e5b7f9..9cbc17ac1 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -8,7 +8,7 @@ #ifndef __CONFIG_BLACKSTAMP_H__ #define __CONFIG_BLACKSTAMP_H__ -#include +#include /* * Debugging: Set these options if you're having problems @@ -270,6 +270,4 @@ #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_FLASH -#include - #endif diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index fea087370..79d06fba5 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_CM_BF527_H__ #define __CONFIG_CM_BF527_H__ -#include +#include /* @@ -132,6 +132,4 @@ */ #include -#include - #endif diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index d07d71f1b..ea548e999 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_CM_BF533_H__ #define __CONFIG_CM_BF533_H__ -#include +#include /* @@ -99,6 +99,4 @@ */ #include -#include - #endif diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 798e77350..65604edd6 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_CM_BF537E_H__ #define __CONFIG_CM_BF537E_H__ -#include +#include /* @@ -119,6 +119,4 @@ */ #include -#include - #endif diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index b08b770e3..93c2239ea 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_CM_BF548_H__ #define __CONFIG_CM_BF548_H__ -#include +#include /* @@ -136,6 +136,4 @@ */ #include -#include - #endif diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index ef4466cd5..53a25807a 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_CM_BF561_H__ #define __CONFIG_CM_BF561_H__ -#include +#include /* @@ -99,6 +99,4 @@ */ #include -#include - #endif diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index 6d03c4ca7..773874264 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_IBF_DSP561__H__ #define __CONFIG_IBF_DSP561__H__ -#include +#include /* @@ -125,6 +125,4 @@ */ #include -#include - -#endif /* __CONFIG_IBF_DSP561__H__ */ +#endif diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index eefc450b9..31fe61a81 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -5,7 +5,7 @@ #ifndef __CONFIG_TCM_BF537_H__ #define __CONFIG_TCM_BF537_H__ -#include +#include /* @@ -120,6 +120,5 @@ */ #include -#include #endif