Blackfin: convert specific pre/post config headers to common method
The Blackfin port was using asm/blackfin-config-{pre,post}.h to setup
common Blackfin board defines. The common method now is to use config.h,
so convert blackfin-config-post.h to that. Rename the still Blackfin
specific blackfin-config-pre.h to config-pre.h so the naming conventions
at least line up.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This commit is contained in:
Mike Frysinger
parent
7c7503ee6c
commit
f348ab85f7
|
|
@ -1,149 +0,0 @@
|
|||
/*
|
||||
* blackfin-config-post.h - setup common defines for Blackfin boards based on config.h
|
||||
*
|
||||
* Copyright (c) 2007-2008 Analog Devices Inc.
|
||||
*
|
||||
* Licensed under the GPL-2 or later.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_BLACKFIN_CONFIG_POST_H__
|
||||
#define __ASM_BLACKFIN_CONFIG_POST_H__
|
||||
|
||||
/* Sanity check CONFIG_BFIN_CPU */
|
||||
#ifndef CONFIG_BFIN_CPU
|
||||
# error CONFIG_BFIN_CPU: your board config needs to define this
|
||||
#endif
|
||||
|
||||
/* Make sure the structure is properly aligned */
|
||||
#if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR)
|
||||
# error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned
|
||||
#endif
|
||||
|
||||
/* Set default CONFIG_VCO_HZ if need be */
|
||||
#if !defined(CONFIG_VCO_HZ)
|
||||
# if (CONFIG_CLKIN_HALF == 0)
|
||||
# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
|
||||
# else
|
||||
# define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / 2)
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* Set default CONFIG_CCLK_HZ if need be */
|
||||
#if !defined(CONFIG_CCLK_HZ)
|
||||
# if (CONFIG_PLL_BYPASS == 0)
|
||||
# define CONFIG_CCLK_HZ (CONFIG_VCO_HZ / CONFIG_CCLK_DIV)
|
||||
# else
|
||||
# define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* Set default CONFIG_SCLK_HZ if need be */
|
||||
#if !defined(CONFIG_SCLK_HZ)
|
||||
# if (CONFIG_PLL_BYPASS == 0)
|
||||
# define CONFIG_SCLK_HZ (CONFIG_VCO_HZ / CONFIG_SCLK_DIV)
|
||||
# else
|
||||
# define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* Since we use these to program PLL registers directly,
|
||||
* make sure the values are sane and won't screw us up.
|
||||
*/
|
||||
#if (CONFIG_VCO_MULT & 0x3F) != CONFIG_VCO_MULT
|
||||
# error CONFIG_VCO_MULT: Invalid value: must fit in 6 bits (0 - 63)
|
||||
#endif
|
||||
#if (CONFIG_CLKIN_HALF & 0x1) != CONFIG_CLKIN_HALF
|
||||
# error CONFIG_CLKIN_HALF: Invalid value: must be 0 or 1
|
||||
#endif
|
||||
#if (CONFIG_PLL_BYPASS & 0x1) != CONFIG_PLL_BYPASS
|
||||
# error CONFIG_PLL_BYPASS: Invalid value: must be 0 or 1
|
||||
#endif
|
||||
|
||||
/* Using L1 scratch pad makes sense for everyone by default. */
|
||||
#ifndef CONFIG_LINUX_CMDLINE_ADDR
|
||||
# define CONFIG_LINUX_CMDLINE_ADDR L1_SRAM_SCRATCH
|
||||
#endif
|
||||
#ifndef CONFIG_LINUX_CMDLINE_SIZE
|
||||
# define CONFIG_LINUX_CMDLINE_SIZE L1_SRAM_SCRATCH_SIZE
|
||||
#endif
|
||||
|
||||
/* Set default SPI flash CS to the one we boot from */
|
||||
#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_SPI_CS)
|
||||
# define CONFIG_ENV_SPI_CS BFIN_BOOT_SPI_SSEL
|
||||
#endif
|
||||
|
||||
/* Default/common Blackfin memory layout */
|
||||
#ifndef CONFIG_SYS_SDRAM_BASE
|
||||
# define CONFIG_SYS_SDRAM_BASE 0
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_MAX_RAM_SIZE
|
||||
# define CONFIG_SYS_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024)
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_MONITOR_BASE
|
||||
# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN)
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_MALLOC_BASE
|
||||
# define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_GBL_DATA_SIZE
|
||||
# define CONFIG_SYS_GBL_DATA_SIZE (128)
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_GBL_DATA_ADDR
|
||||
# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
|
||||
#endif
|
||||
#ifndef CONFIG_STACKBASE
|
||||
# define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4)
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_MEMTEST_START
|
||||
# define CONFIG_SYS_MEMTEST_START 0
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_MEMTEST_END
|
||||
# define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 8192 + 4)
|
||||
#endif
|
||||
|
||||
/* Check to make sure everything fits in external RAM */
|
||||
#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE)
|
||||
# error Memory Map does not fit into configuration
|
||||
#endif
|
||||
|
||||
/* Default/common Blackfin environment settings */
|
||||
#ifndef CONFIG_LOADADDR
|
||||
# define CONFIG_LOADADDR 0x1000000
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_LOAD_ADDR
|
||||
# define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_BOOTM_LEN
|
||||
# define CONFIG_SYS_BOOTM_LEN 0x4000000
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_PROMPT
|
||||
# define CONFIG_SYS_PROMPT "bfin> "
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_CBSIZE
|
||||
# ifdef CONFIG_CMD_KGDB
|
||||
# define CONFIG_SYS_CBSIZE 1024
|
||||
# else
|
||||
# define CONFIG_SYS_CBSIZE 256
|
||||
# endif
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_BARGSIZE
|
||||
# define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_PBSIZE
|
||||
# define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_MAXARGS
|
||||
# define CONFIG_SYS_MAXARGS 16
|
||||
#endif
|
||||
#if defined(CONFIG_SYS_HZ)
|
||||
# if (CONFIG_SYS_HZ != 1000)
|
||||
# warning "CONFIG_SYS_HZ must always be 1000"
|
||||
# endif
|
||||
# undef CONFIG_SYS_HZ
|
||||
#endif
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
#ifndef CONFIG_SYS_BAUDRATE_TABLE
|
||||
# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* blackfin-config-pre.h - common defines for Blackfin boards in config.h
|
||||
* config-pre.h - common defines for Blackfin boards in config.h
|
||||
*
|
||||
* Copyright (c) 2007 Analog Devices Inc.
|
||||
* Copyright (c) 2007-2009 Analog Devices Inc.
|
||||
*
|
||||
* Licensed under the GPL-2 or later.
|
||||
*/
|
||||
|
|
@ -1,24 +1,149 @@
|
|||
/*
|
||||
* Copyright 2009 Freescale Semiconductor, Inc.
|
||||
* config.h - setup common defines for Blackfin boards based on config.h
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
* Copyright (c) 2007-2009 Analog Devices Inc.
|
||||
*
|
||||
* Licensed under the GPL-2 or later.
|
||||
*/
|
||||
|
||||
#ifndef _ASM_CONFIG_H_
|
||||
#define _ASM_CONFIG_H_
|
||||
#ifndef __ASM_BLACKFIN_CONFIG_POST_H__
|
||||
#define __ASM_BLACKFIN_CONFIG_POST_H__
|
||||
|
||||
/* Sanity check CONFIG_BFIN_CPU */
|
||||
#ifndef CONFIG_BFIN_CPU
|
||||
# error CONFIG_BFIN_CPU: your board config needs to define this
|
||||
#endif
|
||||
|
||||
/* Make sure the structure is properly aligned */
|
||||
#if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR)
|
||||
# error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned
|
||||
#endif
|
||||
|
||||
/* Set default CONFIG_VCO_HZ if need be */
|
||||
#if !defined(CONFIG_VCO_HZ)
|
||||
# if (CONFIG_CLKIN_HALF == 0)
|
||||
# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
|
||||
# else
|
||||
# define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / 2)
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* Set default CONFIG_CCLK_HZ if need be */
|
||||
#if !defined(CONFIG_CCLK_HZ)
|
||||
# if (CONFIG_PLL_BYPASS == 0)
|
||||
# define CONFIG_CCLK_HZ (CONFIG_VCO_HZ / CONFIG_CCLK_DIV)
|
||||
# else
|
||||
# define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* Set default CONFIG_SCLK_HZ if need be */
|
||||
#if !defined(CONFIG_SCLK_HZ)
|
||||
# if (CONFIG_PLL_BYPASS == 0)
|
||||
# define CONFIG_SCLK_HZ (CONFIG_VCO_HZ / CONFIG_SCLK_DIV)
|
||||
# else
|
||||
# define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* Since we use these to program PLL registers directly,
|
||||
* make sure the values are sane and won't screw us up.
|
||||
*/
|
||||
#if (CONFIG_VCO_MULT & 0x3F) != CONFIG_VCO_MULT
|
||||
# error CONFIG_VCO_MULT: Invalid value: must fit in 6 bits (0 - 63)
|
||||
#endif
|
||||
#if (CONFIG_CLKIN_HALF & 0x1) != CONFIG_CLKIN_HALF
|
||||
# error CONFIG_CLKIN_HALF: Invalid value: must be 0 or 1
|
||||
#endif
|
||||
#if (CONFIG_PLL_BYPASS & 0x1) != CONFIG_PLL_BYPASS
|
||||
# error CONFIG_PLL_BYPASS: Invalid value: must be 0 or 1
|
||||
#endif
|
||||
|
||||
/* Using L1 scratch pad makes sense for everyone by default. */
|
||||
#ifndef CONFIG_LINUX_CMDLINE_ADDR
|
||||
# define CONFIG_LINUX_CMDLINE_ADDR L1_SRAM_SCRATCH
|
||||
#endif
|
||||
#ifndef CONFIG_LINUX_CMDLINE_SIZE
|
||||
# define CONFIG_LINUX_CMDLINE_SIZE L1_SRAM_SCRATCH_SIZE
|
||||
#endif
|
||||
|
||||
/* Set default SPI flash CS to the one we boot from */
|
||||
#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_SPI_CS)
|
||||
# define CONFIG_ENV_SPI_CS BFIN_BOOT_SPI_SSEL
|
||||
#endif
|
||||
|
||||
/* Default/common Blackfin memory layout */
|
||||
#ifndef CONFIG_SYS_SDRAM_BASE
|
||||
# define CONFIG_SYS_SDRAM_BASE 0
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_MAX_RAM_SIZE
|
||||
# define CONFIG_SYS_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024)
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_MONITOR_BASE
|
||||
# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN)
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_MALLOC_BASE
|
||||
# define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_GBL_DATA_SIZE
|
||||
# define CONFIG_SYS_GBL_DATA_SIZE (128)
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_GBL_DATA_ADDR
|
||||
# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
|
||||
#endif
|
||||
#ifndef CONFIG_STACKBASE
|
||||
# define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4)
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_MEMTEST_START
|
||||
# define CONFIG_SYS_MEMTEST_START 0
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_MEMTEST_END
|
||||
# define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 8192 + 4)
|
||||
#endif
|
||||
|
||||
/* Check to make sure everything fits in external RAM */
|
||||
#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE)
|
||||
# error Memory Map does not fit into configuration
|
||||
#endif
|
||||
|
||||
/* Default/common Blackfin environment settings */
|
||||
#ifndef CONFIG_LOADADDR
|
||||
# define CONFIG_LOADADDR 0x1000000
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_LOAD_ADDR
|
||||
# define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_BOOTM_LEN
|
||||
# define CONFIG_SYS_BOOTM_LEN 0x4000000
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_PROMPT
|
||||
# define CONFIG_SYS_PROMPT "bfin> "
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_CBSIZE
|
||||
# ifdef CONFIG_CMD_KGDB
|
||||
# define CONFIG_SYS_CBSIZE 1024
|
||||
# else
|
||||
# define CONFIG_SYS_CBSIZE 256
|
||||
# endif
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_BARGSIZE
|
||||
# define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_PBSIZE
|
||||
# define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#endif
|
||||
#ifndef CONFIG_SYS_MAXARGS
|
||||
# define CONFIG_SYS_MAXARGS 16
|
||||
#endif
|
||||
#if defined(CONFIG_SYS_HZ)
|
||||
# if (CONFIG_SYS_HZ != 1000)
|
||||
# warning "CONFIG_SYS_HZ must always be 1000"
|
||||
# endif
|
||||
# undef CONFIG_SYS_HZ
|
||||
#endif
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
#ifndef CONFIG_SYS_BAUDRATE_TABLE
|
||||
# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_BF518F_EZBRD_H__
|
||||
#define __CONFIG_BF518F_EZBRD_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -143,6 +143,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_BF526_EZBRD_H__
|
||||
#define __CONFIG_BF526_EZBRD_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -185,6 +185,4 @@ void __led_toggle(led_id_t mask);
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_BF527_EZKIT_H__
|
||||
#define __CONFIG_BF527_EZKIT_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -167,6 +167,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_BF533_EZKIT_H__
|
||||
#define __CONFIG_BF533_EZKIT_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -152,6 +152,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_BF533_STAMP_H__
|
||||
#define __CONFIG_BF533_STAMP_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -241,6 +241,4 @@ void __led_toggle(led_id_t mask);
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
#ifndef __CONFIG_BF537_MINOTAUR_H__
|
||||
#define __CONFIG_BF537_MINOTAUR_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -198,7 +198,4 @@
|
|||
"ramargs=setenv bootargs " CONFIG_BOOTARGS "\0" \
|
||||
BOOT_ENV_SETTINGS
|
||||
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_BF537_PNAV_H__
|
||||
#define __CONFIG_BF537_PNAV_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -167,6 +167,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
#ifndef __CONFIG_BF537_SRV1_H__
|
||||
#define __CONFIG_BF537_SRV1_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -198,7 +198,4 @@
|
|||
"ramargs=setenv bootargs " CONFIG_BOOTARGS "\0" \
|
||||
BOOT_ENV_SETTINGS
|
||||
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_BF537_STAMP_H__
|
||||
#define __CONFIG_BF537_STAMP_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -257,6 +257,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_BF538F_EZKIT_H__
|
||||
#define __CONFIG_BF538F_EZKIT_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -134,6 +134,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_BF548_EZKIT_H__
|
||||
#define __CONFIG_BF548_EZKIT_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -206,6 +206,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_BF561_EZKIT_H__
|
||||
#define __CONFIG_BF561_EZKIT_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -149,6 +149,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif /* __CONFIG_EZKIT561_H__ */
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@
|
|||
#ifndef __CONFIG_BLACKSTAMP_H__
|
||||
#define __CONFIG_BLACKSTAMP_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
/*
|
||||
* Debugging: Set these options if you're having problems
|
||||
|
|
@ -270,6 +270,4 @@
|
|||
#undef CONFIG_CMD_JFFS2
|
||||
#undef CONFIG_CMD_FLASH
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_CM_BF527_H__
|
||||
#define __CONFIG_CM_BF527_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -132,6 +132,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_CM_BF533_H__
|
||||
#define __CONFIG_CM_BF533_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -99,6 +99,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_CM_BF537E_H__
|
||||
#define __CONFIG_CM_BF537E_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -119,6 +119,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_CM_BF548_H__
|
||||
#define __CONFIG_CM_BF548_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -136,6 +136,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_CM_BF561_H__
|
||||
#define __CONFIG_CM_BF561_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -99,6 +99,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_IBF_DSP561__H__
|
||||
#define __CONFIG_IBF_DSP561__H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -125,6 +125,4 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif /* __CONFIG_IBF_DSP561__H__ */
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
#ifndef __CONFIG_TCM_BF537_H__
|
||||
#define __CONFIG_TCM_BF537_H__
|
||||
|
||||
#include <asm/blackfin-config-pre.h>
|
||||
#include <asm/config-pre.h>
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -120,6 +120,5 @@
|
|||
*/
|
||||
#include <configs/bfin_adi_common.h>
|
||||
|
||||
#include <asm/blackfin-config-post.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Reference in New Issue