From efe2a4d5cf96dd37bc4782ba1880cee4ed1117c5 Mon Sep 17 00:00:00 2001 From: wdenk Date: Thu, 16 Dec 2004 21:44:03 +0000 Subject: [PATCH] Code cleanup. --- README | 10 +- board/esd/apc405/strataflash.c | 63 +- board/esd/common/lcd.c | 2 +- board/esd/common/lcd.h | 1 - board/esd/common/s1d13806_1024_768_8bpp.h | 1 - board/esd/common/s1d13806_320_240_4bpp.h | 1 - board/esd/common/s1d13806_640_480_16bpp.h | 1 - board/esd/common/s1d13806_640_480_8bpp.h | 1 - board/esd/cpci405/cpci405.c | 6 +- board/esd/cpci750/i2c.c | 62 +- board/esd/cpci750/ide.c | 59 +- board/esd/cpci750/local.h | 4 +- board/esd/cpci750/misc.S | 8 +- board/esd/cpci750/sdram_init.c | 1910 ++++++++++++--------- board/esd/cpci750/serial.c | 2 +- board/esd/hh405/hh405.c | 14 +- board/esd/hub405/hub405.c | 2 +- board/esd/pci405/pci405.c | 6 +- board/esd/pci405/writeibm.S | 178 +- board/esd/pmc405/strataflash.c | 63 +- board/esd/tasreg/tasreg.c | 2 +- board/g2000/g2000.c | 30 +- board/g2000/strataflash.c | 47 +- board/inka4x0/flash.c | 40 +- board/inka4x0/inka4x0.c | 1 - board/tqm5200/tqm5200.c | 22 +- cpu/at91rm9200/cpu.c | 2 +- drivers/ps2ser.c | 4 +- fs/ext2/dev.c | 151 +- fs/ext2/ext2fs.c | 906 +++++----- include/asm-m68k/m5249.h | 2 - include/configs/APC405.h | 10 +- include/configs/CPCI750.h | 22 +- include/configs/TASREG.h | 6 +- include/configs/TQM5200.h | 2 +- include/ppc405.h | 8 +- include/universe.h | 9 - 37 files changed, 1850 insertions(+), 1808 deletions(-) diff --git a/README b/README index 9455cc22e..32341f42b 100644 --- a/README +++ b/README @@ -835,7 +835,7 @@ The following options need to be configured: function struct part_info* jffs2_part_info(int part_num) If you define only one JFFS2 partition you may also want to - #define CFG_JFFS_SINGLE_PART 1 + #define CFG_JFFS_SINGLE_PART 1 to disable the command chpart. This is the default when you have not defined a custom partition @@ -1978,7 +1978,7 @@ Low Level (hardware related) configuration options: initializations. - CFG_IMMR: Physical address of the Internal Memory. - DO NOT CHANGE unless you know exactly what you're + DO NOT CHANGE unless you know exactly what you're doing! (11-4) [MPC8xx/82xx systems only] - CFG_INIT_RAM_ADDR: @@ -2118,13 +2118,13 @@ Low Level (hardware related) configuration options: "md/mw" commands. Examples: - => mdc.b 10 4 500 + => mdc.b 10 4 500 This command will print 4 bytes (10,11,12,13) each 500 ms. - => mwc.l 100 12345678 10 + => mwc.l 100 12345678 10 This command will write 12345678 to address 100 all 10 ms. - This only takes effect if the memory commands are activated + This only takes effect if the memory commands are activated globally (CFG_CMD_MEM). Building the Software: diff --git a/board/esd/apc405/strataflash.c b/board/esd/apc405/strataflash.c index 6578ed9d5..ad7a71dc4 100644 --- a/board/esd/apc405/strataflash.c +++ b/board/esd/apc405/strataflash.c @@ -24,7 +24,7 @@ #include #include -#undef DEBUG_FLASH +#undef DEBUG_FLASH /* * This file implements a Common Flash Interface (CFI) driver for ppcboot. * The width of the port and the width of the chips are determined at initialization. @@ -85,12 +85,8 @@ #define FLASH_OFFSET_USER_PROTECTION 0x85 #define FLASH_OFFSET_INTEL_PROTECTION 0x81 - #define FLASH_MAN_CFI 0x01000000 - - - typedef union { unsigned char c; unsigned short w; @@ -107,13 +103,10 @@ typedef union { flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - /*----------------------------------------------------------------------- * Functions */ - - static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c); static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf); static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd); @@ -249,7 +242,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS); flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE); flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM); - + if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) { rcode = 1; } else @@ -277,7 +270,7 @@ void flash_print_info (flash_info_t *info) info->size >> 20, info->sector_count); printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n", info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size); - + printf (" Sector Start Addresses:"); for (i=0; isector_count; ++i) { #ifdef CFG_FLASH_EMPTY_INFO @@ -286,28 +279,28 @@ void flash_print_info (flash_info_t *info) int erased; volatile unsigned long *flash; - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count-1)) - size = info->start[i+1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k=0; ksector_count-1)) + size = info->start[i+1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + erased = 1; + flash = (volatile unsigned long *)info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k=0; kstart[i], erased ? " E" : " ", @@ -414,7 +407,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot) else flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR); - if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout, + if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout, prot?"protect":"unprotect")) == 0) { info->protect[sector] = prot; @@ -464,7 +457,7 @@ static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout printf("Command Sequence Error.\n"); } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){ printf("Block Erase Error.\n"); - retcode = ERR_NOT_ERASED; + retcode = ERR_NOT_ERASED; } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) { printf("Locking Error\n"); } @@ -733,7 +726,7 @@ static int find_sector(flash_info_t *info, ulong addr) { int sector; for(sector = info->sector_count - 1; sector >= 0; sector--) { - if(addr >= info->start[sector]) + if(addr >= info->start[sector]) break; } return sector; @@ -741,7 +734,7 @@ static int find_sector(flash_info_t *info, ulong addr) static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len) { - + int sector; int cnt; int retcode; @@ -789,8 +782,8 @@ static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, in flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM); retcode = flash_full_status_check(info, sector, info->buffer_write_tout, "buffer write"); - } + } flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); return retcode; -} +} #endif /* CFG_USE_FLASH_BUFFER_WRITE */ diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c index a1fc18089..d2d642a1a 100644 --- a/board/esd/common/lcd.c +++ b/board/esd/common/lcd.c @@ -136,7 +136,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count, } s1dValue = regs[i].Value; lcd_reg[s1dReg] = s1dValue; - } + } /* * Decompress bmp image diff --git a/board/esd/common/lcd.h b/board/esd/common/lcd.h index a8971f6c0..3169e6bb5 100644 --- a/board/esd/common/lcd.h +++ b/board/esd/common/lcd.h @@ -68,4 +68,3 @@ typedef struct /**** BMP file info structure ****/ unsigned int biClrUsed; /* Number of colors used */ unsigned int biClrImportant; /* Number of important colors */ } BITMAPINFOHEADER; - diff --git a/board/esd/common/s1d13806_1024_768_8bpp.h b/board/esd/common/s1d13806_1024_768_8bpp.h index a37e79719..68801bf40 100644 --- a/board/esd/common/s1d13806_1024_768_8bpp.h +++ b/board/esd/common/s1d13806_1024_768_8bpp.h @@ -123,4 +123,3 @@ static S1D_REGS regs_13806_1024_768_8bpp[] = {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ {0x01FC,0x01}, /* Display Mode Register */ }; - diff --git a/board/esd/common/s1d13806_320_240_4bpp.h b/board/esd/common/s1d13806_320_240_4bpp.h index beb6e9ed6..24d7350f2 100644 --- a/board/esd/common/s1d13806_320_240_4bpp.h +++ b/board/esd/common/s1d13806_320_240_4bpp.h @@ -123,4 +123,3 @@ static S1D_REGS regs_13806_320_240_4bpp[] = {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ {0x01FC,0x01}, /* Display Mode Register */ }; - diff --git a/board/esd/common/s1d13806_640_480_16bpp.h b/board/esd/common/s1d13806_640_480_16bpp.h index 6b83bf827..178f1a961 100644 --- a/board/esd/common/s1d13806_640_480_16bpp.h +++ b/board/esd/common/s1d13806_640_480_16bpp.h @@ -123,4 +123,3 @@ static S1D_REGS regs_13806_640_480_16bpp[] = {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ {0x01FC,0x01}, /* Display Mode Register */ }; - diff --git a/board/esd/common/s1d13806_640_480_8bpp.h b/board/esd/common/s1d13806_640_480_8bpp.h index dd0cc0994..c1f5b2bb7 100644 --- a/board/esd/common/s1d13806_640_480_8bpp.h +++ b/board/esd/common/s1d13806_640_480_8bpp.h @@ -123,4 +123,3 @@ static S1D_REGS regs_13806_640_320_16bpp[] = {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ {0x01FC,0x01}, /* Display Mode Register */ }; - diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index 873751889..f27668d14 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -559,11 +559,11 @@ void ide_set_reset(int on) #ifdef CONFIG_CPCI405AB #define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \ - |= CFG_FPGA_MODE_1WIRE_DIR) + |= CFG_FPGA_MODE_1WIRE_DIR) #define ONE_WIRE_SET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \ - &= ~CFG_FPGA_MODE_1WIRE_DIR) + &= ~CFG_FPGA_MODE_1WIRE_DIR) #define ONE_WIRE_GET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \ - & CFG_FPGA_MODE_1WIRE) + & CFG_FPGA_MODE_1WIRE) /* * Generate a 1-wire reset, return 1 if no presence detect was found, diff --git a/board/esd/cpci750/i2c.c b/board/esd/cpci750/i2c.c index fcec78eac..5b1bc01c2 100644 --- a/board/esd/cpci750/i2c.c +++ b/board/esd/cpci750/i2c.c @@ -72,28 +72,28 @@ static void i2c_init (int speed, int slaveaddr) /* Setup bus */ /* gtI2cReset */ GT_REG_WRITE (I2C_SOFT_RESET, 0); - asm(" sync"); + asm(" sync"); GT_REG_WRITE (I2C_CONTROL, 0); - asm(" sync"); + asm(" sync"); DP (puts ("set baudrate\n")); GT_REG_WRITE (I2C_STATUS_BAUDE_RATE, (actualM << 3) | actualN); - asm(" sync"); + asm(" sync"); DP (puts ("udelay...\n")); udelay (I2C_DELAY); GT_REG_WRITE (I2C_CONTROL, (0x1 << 2) | (0x1 << 6)); - asm(" sync"); + asm(" sync"); } static uchar i2c_select_device (uchar dev_addr, uchar read, int ten_bit) { unsigned int status, data, bits = 7; - unsigned int control; + unsigned int control; int count = 0; DP (puts ("i2c_select_device\n")); @@ -107,19 +107,19 @@ static uchar i2c_select_device (uchar dev_addr, uchar read, int ten_bit) GT_REG_READ (I2C_CONTROL, &control); control |= (0x1 << 2); GT_REG_WRITE (I2C_CONTROL, control); - asm(" sync"); + asm(" sync"); GT_REG_READ (I2C_CONTROL, &control); control |= (0x1 << 5); /* generate the I2C_START_BIT */ GT_REG_WRITE (I2C_CONTROL, control); - asm(" sync"); + asm(" sync"); RESET_REG_BITS (I2C_CONTROL, (0x01 << 3)); - asm(" sync"); + asm(" sync"); GT_REG_READ (I2C_CONTROL, &status); while ((status & 0x08) != 0x08) { - GT_REG_READ (I2C_CONTROL, &status); - } + GT_REG_READ (I2C_CONTROL, &status); + } count = 0; @@ -128,7 +128,7 @@ static uchar i2c_select_device (uchar dev_addr, uchar read, int ten_bit) while (((status & 0xff) != 0x08) && ((status & 0xff) != 0x10)){ if (count > 200) { #ifdef DEBUG_I2C - printf ("Failed to set startbit: 0x%02x\n", status); + printf ("Failed to set startbit: 0x%02x\n", status); #endif GT_REG_WRITE (I2C_CONTROL, (0x1 << 4)); /*stop */ asm(" sync"); @@ -146,21 +146,21 @@ static uchar i2c_select_device (uchar dev_addr, uchar read, int ten_bit) /* set the read bit */ data |= read; GT_REG_WRITE (I2C_DATA, data); - asm(" sync"); + asm(" sync"); RESET_REG_BITS (I2C_CONTROL, BIT3); - asm(" sync"); + asm(" sync"); GT_REG_READ (I2C_CONTROL, &status); while ((status & 0x08) != 0x08) { - GT_REG_READ (I2C_CONTROL, &status); - } + GT_REG_READ (I2C_CONTROL, &status); + } GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status); count = 0; while (((status & 0xff) != 0x40) && ((status & 0xff) != 0x18)) { if (count > 200) { #ifdef DEBUG_I2C - printf ("Failed to write address: 0x%02x\n", status); + printf ("Failed to write address: 0x%02x\n", status); #endif GT_REG_WRITE (I2C_CONTROL, (0x1 << 4)); /*stop */ return (status); @@ -195,15 +195,15 @@ static uchar i2c_get_data (uchar * return_data, int len) GT_REG_READ (I2C_CONTROL, &status); while ((status & 0x08) != 0x08) { - GT_REG_READ (I2C_CONTROL, &status); - } + GT_REG_READ (I2C_CONTROL, &status); + } GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status); count++; while ((status & 0xff) != 0x50) { if (count > 20) { #ifdef DEBUG_I2C - printf ("Failed to get data len status: 0x%02x\n", status); + printf ("Failed to get data len status: 0x%02x\n", status); #endif GT_REG_WRITE (I2C_CONTROL, (0x1 << 4)); /*stop */ asm(" sync"); @@ -219,13 +219,13 @@ static uchar i2c_get_data (uchar * return_data, int len) } RESET_REG_BITS (I2C_CONTROL, BIT2 | BIT3); - asm(" sync"); + asm(" sync"); count = 0; GT_REG_READ (I2C_CONTROL, &status); while ((status & 0x08) != 0x08) { - GT_REG_READ (I2C_CONTROL, &status); - } + GT_REG_READ (I2C_CONTROL, &status); + } while ((status & 0xff) != 0x58) { if (count > 2000) { @@ -236,9 +236,9 @@ static uchar i2c_get_data (uchar * return_data, int len) count++; } GT_REG_WRITE (I2C_CONTROL, (0x1 << 4)); /* stop */ - asm(" sync"); + asm(" sync"); RESET_REG_BITS (I2C_CONTROL, (0x1 << 3)); - asm(" sync"); + asm(" sync"); return (0); } @@ -254,7 +254,7 @@ static uchar i2c_write_data (unsigned int *data, int len) DP (puts ("i2c_write_data\n")); while (len) { - count = 0; + count = 0; temp = (unsigned int) (*temp_ptr); GT_REG_WRITE (I2C_DATA, temp); asm(" sync"); @@ -264,7 +264,7 @@ static uchar i2c_write_data (unsigned int *data, int len) GT_REG_READ (I2C_CONTROL, &status); while ((status & 0x08) != 0x08) { GT_REG_READ (I2C_CONTROL, &status); - } + } GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status); count++; @@ -294,7 +294,7 @@ static uchar i2c_write_byte (unsigned char *data, int len) DP (puts ("i2c_write_byte\n")); while (len) { - count = 0; + count = 0; /* Set and assert the data */ temp = *temp_ptr; GT_REG_WRITE (I2C_DATA, temp); @@ -306,7 +306,7 @@ static uchar i2c_write_byte (unsigned char *data, int len) GT_REG_READ (I2C_CONTROL, &status); while ((status & 0x08) != 0x08) { GT_REG_READ (I2C_CONTROL, &status); - } + } GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status); count++; @@ -419,7 +419,7 @@ i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data, void i2c_stop (void) { GT_REG_WRITE (I2C_CONTROL, (0x1 << 4)); - asm(" sync"); + asm(" sync"); } @@ -441,7 +441,7 @@ i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data, status); #endif return status; - } + } status = i2c_write_byte (data, len); /* write the data */ @@ -450,7 +450,7 @@ i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data, printf ("Data not written: 0x%02x\n", status); #endif return status; - } + } /* issue a stop bit */ i2c_stop (); return 0; diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c index 7400e8dc5..bea99ce8e 100644 --- a/board/esd/cpci750/ide.c +++ b/board/esd/cpci750/ide.c @@ -32,41 +32,34 @@ extern ulong ide_bus_offset[CFG_IDE_MAXBUS]; -int ide_preinit - ( - void - ) - { - int status; - pci_dev_t devbusfn; - int l; +int ide_preinit (void) +{ + int status; + pci_dev_t devbusfn; + int l; - status = 1; - for(l=0;l + * Ingo Assmus * * See file CREDITS for list of people who contributed to this * project. @@ -35,7 +35,7 @@ /* This tells PPCBoot that the config options are compiled in */ /* #undef ENV_IS_EMBEDDED */ -/* Don't touch this! PPCBOOT figures this out based on other +/* Don't touch this! PPCBOOT figures this out based on other * magic. */ /* Uncomment and define any of the below options */ diff --git a/board/esd/cpci750/misc.S b/board/esd/cpci750/misc.S index ec5d9ecc4..160b1d31f 100644 --- a/board/esd/cpci750/misc.S +++ b/board/esd/cpci750/misc.S @@ -158,13 +158,13 @@ board_asm_init: rlwinm r3, r3, 16, 16, 31 lis r4, CFG_GT_REGS@h ori r4, r4, CFG_GT_REGS@l - li r5, INTEGRATED_SRAM_BASE_ADDR - stwbrx r3, r5, r4 + li r5, INTEGRATED_SRAM_BASE_ADDR + stwbrx r3, r5, r4 2: lwbrx r6, r5, r4 cmp cr0, r3, r6 - bne 2b - + bne 2b + /* done! */ blr #endif diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c index d22ffe517..db545ef68 100644 --- a/board/esd/cpci750/sdram_init.c +++ b/board/esd/cpci750/sdram_init.c @@ -125,8 +125,8 @@ typedef struct sdram_info { typedef enum _memoryType {SDRAM, DDR} MEMORY_TYPE; typedef enum _voltageInterface {TTL_5V_TOLERANT, LVTTL, HSTL_1_5V, - SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN, - } VOLTAGE_INTERFACE; + SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN, + } VOLTAGE_INTERFACE; typedef enum _max_CL_supported_DDR {DDR_CL_1=1, DDR_CL_1_5=2, DDR_CL_2=4, DDR_CL_2_5=8, DDR_CL_3=16, DDR_CL_3_5=32, DDR_CL_FAULT} MAX_CL_SUPPORTED_DDR; typedef enum _max_CL_supported_SD {SD_CL_1=1, SD_CL_2, SD_CL_3, SD_CL_4, SD_CL_5, SD_CL_6, SD_CL_7, SD_FAULT} MAX_CL_SUPPORTED_SD; @@ -248,760 +248,974 @@ NSto10PS(unsigned char spd_byte) /* This code reads the SPD chip on the sdram and populates * the array which is passed in with the relevant information */ /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */ -static int -check_dimm(uchar slot, AUX_MEM_DIMM_INFO *dimmInfo) - +static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) { - DECLARE_GLOBAL_DATA_PTR; + DECLARE_GLOBAL_DATA_PTR; - unsigned long spd_checksum; + unsigned long spd_checksum; uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR; int ret; - unsigned int i,j,density = 1,devicesForErrCheck = 0; + unsigned int i, j, density = 1, devicesForErrCheck = 0; + #ifdef DEBUG - unsigned int k; + unsigned int k; #endif - unsigned int rightOfPoint = 0,leftOfPoint = 0, mult, div, time_tmp; - int sign = 1,shift,maskLeftOfPoint,maskRightOfPoint; + unsigned int rightOfPoint = 0, leftOfPoint = 0, mult, div, time_tmp; + int sign = 1, shift, maskLeftOfPoint, maskRightOfPoint; uchar supp_cal, cal_val; ulong memclk, tmemclk; ulong tmp; - uchar trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks; + uchar trp_clocks = 0, trcd_clocks, tras_clocks, trrd_clocks; uchar data[128]; memclk = gd->bus_clk; - tmemclk = 1000000000 / (memclk / 100); /* in 10 ps units */ + tmemclk = 1000000000 / (memclk / 100); /* in 10 ps units */ - memset(data, 0, sizeof(data)); + memset (data, 0, sizeof (data)); ret = 0; - DP(puts("before i2c read\n")); + DP (puts ("before i2c read\n")); - ret = i2c_read(addr, 0, 2, data, 128); + ret = i2c_read (addr, 0, 2, data, 128); - DP(puts("after i2c read\n")); + DP (puts ("after i2c read\n")); - if ((data[64] != 'e') || (data[65] != 's') || (data[66] != 'd') || (data[67] != '-') || - (data[68] != 'g') || (data[69] != 'm') || (data[70] != 'b') || (data[71] != 'h')) - { - ret = -1; - } + if ((data[64] != 'e') || (data[65] != 's') || (data[66] != 'd') + || (data[67] != '-') || (data[68] != 'g') || (data[69] != 'm') + || (data[70] != 'b') || (data[71] != 'h')) { + ret = -1; + } - if ((ret != 0) && (slot == 0)) - { - memset(data, 0, sizeof(data)); - data[ 0] = 0x80; data[ 1] = 0x08; data[ 2] = 0x07; data[ 3] = 0x0c; - data[ 4] = 0x09; data[ 5] = 0x01; data[ 6] = 0x48; data[ 7] = 0x00; - data[ 8] = 0x04; data[ 9] = 0x75; data[10] = 0x80; data[11] = 0x02; - data[12] = 0x80; data[13] = 0x10; data[14] = 0x08; data[15] = 0x01; - data[16] = 0x0e; data[17] = 0x04; data[18] = 0x0c; data[19] = 0x01; - data[20] = 0x02; data[21] = 0x20; data[22] = 0x00; data[23] = 0xa0; - data[24] = 0x80; data[25] = 0x00; data[26] = 0x00; data[27] = 0x50; - data[28] = 0x3c; data[29] = 0x50; data[30] = 0x32; data[31] = 0x10; - data[32] = 0xb0; data[33] = 0xb0; data[34] = 0x60; data[35] = 0x60; - data[64] = 'e' ; data[65] = 's' ; data[66] = 'd' ; data[67] = '-' ; - data[68] = 'g' ; data[69] = 'm' ; data[70] = 'b' ; data[71] = 'h' ; - ret = 0; - } + if ((ret != 0) && (slot == 0)) { + memset (data, 0, sizeof (data)); + data[0] = 0x80; + data[1] = 0x08; + data[2] = 0x07; + data[3] = 0x0c; + data[4] = 0x09; + data[5] = 0x01; + data[6] = 0x48; + data[7] = 0x00; + data[8] = 0x04; + data[9] = 0x75; + data[10] = 0x80; + data[11] = 0x02; + data[12] = 0x80; + data[13] = 0x10; + data[14] = 0x08; + data[15] = 0x01; + data[16] = 0x0e; + data[17] = 0x04; + data[18] = 0x0c; + data[19] = 0x01; + data[20] = 0x02; + data[21] = 0x20; + data[22] = 0x00; + data[23] = 0xa0; + data[24] = 0x80; + data[25] = 0x00; + data[26] = 0x00; + data[27] = 0x50; + data[28] = 0x3c; + data[29] = 0x50; + data[30] = 0x32; + data[31] = 0x10; + data[32] = 0xb0; + data[33] = 0xb0; + data[34] = 0x60; + data[35] = 0x60; + data[64] = 'e'; + data[65] = 's'; + data[66] = 'd'; + data[67] = '-'; + data[68] = 'g'; + data[69] = 'm'; + data[70] = 'b'; + data[71] = 'h'; + ret = 0; + } /* zero all the values */ - memset(dimmInfo, 0, sizeof(*dimmInfo)); + memset (dimmInfo, 0, sizeof (*dimmInfo)); - /* copy the SPD content 1:1 into the dimmInfo structure*/ - for(i = 0 ; i <= 127 ; i++) - { - dimmInfo->spd_raw_data[i] = data[i]; - } + /* copy the SPD content 1:1 into the dimmInfo structure */ + for (i = 0; i <= 127; i++) { + dimmInfo->spd_raw_data[i] = data[i]; + } if (ret) { - DP(printf("No DIMM in slot %d [err = %x]\n", slot, ret)); + DP (printf ("No DIMM in slot %d [err = %x]\n", slot, ret)); return 0; - } - else - dimmInfo->slot = slot; /* start to fill up dimminfo for this "slot" */ + } else + dimmInfo->slot = slot; /* start to fill up dimminfo for this "slot" */ #ifdef CFG_DISPLAY_DIMM_SPD_CONTENT - for(i = 0 ; i <= 127 ; i++) - { - printf("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i], data[i]); - } + for (i = 0; i <= 127; i++) { + printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i], + data[i]); + } #endif #ifdef DEBUG -/* find Manufactura of Dimm Module */ - for(i = 0 ; i < sizeof(dimmInfo->manufactura) ; i++) - { - dimmInfo->manufactura[i] = data[64+i]; - } - printf("\nThis RAM-Module is produced by: %s\n", dimmInfo->manufactura); + /* find Manufacturer of Dimm Module */ + for (i = 0; i < sizeof (dimmInfo->manufactura); i++) { + dimmInfo->manufactura[i] = data[64 + i]; + } + printf ("\nThis RAM-Module is produced by: %s\n", + dimmInfo->manufactura); -/* find Manul-ID of Dimm Module */ - for(i = 0 ; i < sizeof(dimmInfo->modul_id) ; i++) - { - dimmInfo->modul_id[i] = data[73+i]; - } - printf("The Module-ID of this RAM-Module is: %s\n", dimmInfo->modul_id); + /* find Manul-ID of Dimm Module */ + for (i = 0; i < sizeof (dimmInfo->modul_id); i++) { + dimmInfo->modul_id[i] = data[73 + i]; + } + printf ("The Module-ID of this RAM-Module is: %s\n", + dimmInfo->modul_id); -/* find Vendor-Data of Dimm Module */ - for(i = 0 ; i < sizeof(dimmInfo->vendor_data) ; i++) - { - dimmInfo->vendor_data[i] = data[99+i]; - } - printf("Vendor Data of this RAM-Module is: %s\n", dimmInfo->vendor_data); + /* find Vendor-Data of Dimm Module */ + for (i = 0; i < sizeof (dimmInfo->vendor_data); i++) { + dimmInfo->vendor_data[i] = data[99 + i]; + } + printf ("Vendor Data of this RAM-Module is: %s\n", + dimmInfo->vendor_data); -/* find modul_serial_no of Dimm Module */ - dimmInfo->modul_serial_no = (*((unsigned long *)(&data[95]))); - printf("Serial No. of this RAM-Module is: %ld (%lx)\n", dimmInfo->modul_serial_no, dimmInfo->modul_serial_no); + /* find modul_serial_no of Dimm Module */ + dimmInfo->modul_serial_no = (*((unsigned long *) (&data[95]))); + printf ("Serial No. of this RAM-Module is: %ld (%lx)\n", + dimmInfo->modul_serial_no, dimmInfo->modul_serial_no); -/* find Manufac-Data of Dimm Module */ - dimmInfo->manufac_date = (*((unsigned int *)(&data[93]))); - printf("Manufactoring Date of this RAM-Module is: %d.%d\n", data[93], data [94]); /*dimmInfo->manufac_date*/ + /* find Manufac-Data of Dimm Module */ + dimmInfo->manufac_date = (*((unsigned int *) (&data[93]))); + printf ("Manufactoring Date of this RAM-Module is: %d.%d\n", data[93], data[94]); /*dimmInfo->manufac_date */ -/* find modul_revision of Dimm Module */ - dimmInfo->modul_revision = (*((unsigned int *)(&data[91]))); - printf("Module Revision of this RAM-Module is: %d.%d\n", data[91], data [92]); /* dimmInfo->modul_revision*/ + /* find modul_revision of Dimm Module */ + dimmInfo->modul_revision = (*((unsigned int *) (&data[91]))); + printf ("Module Revision of this RAM-Module is: %d.%d\n", data[91], data[92]); /* dimmInfo->modul_revision */ -/* find manufac_place of Dimm Module */ - dimmInfo->manufac_place = (*((unsigned char *)(&data[72]))); - printf("manufac_place of this RAM-Module is: %d\n", dimmInfo->manufac_place); + /* find manufac_place of Dimm Module */ + dimmInfo->manufac_place = (*((unsigned char *) (&data[72]))); + printf ("manufac_place of this RAM-Module is: %d\n", + dimmInfo->manufac_place); #endif /*------------------------------------------------------------------------------------------------------------------------------*/ /* calculate SPD checksum */ /*------------------------------------------------------------------------------------------------------------------------------*/ - spd_checksum = 0; -#if 0 /* test-only */ - for(i = 0 ; i <= 62 ; i++) - { - spd_checksum += data[i]; - } + spd_checksum = 0; +#if 0 /* test-only */ + for (i = 0; i <= 62; i++) { + spd_checksum += data[i]; + } - if ((spd_checksum & 0xff) != data[63]) - { - printf("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int)(spd_checksum & 0xff), data[63]); - hang(); - } + if ((spd_checksum & 0xff) != data[63]) { + printf ("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int) (spd_checksum & 0xff), data[63]); + hang (); + } - else - printf("SPD Checksum ok!\n"); + else + printf ("SPD Checksum ok!\n"); #endif /* test-only */ /*------------------------------------------------------------------------------------------------------------------------------*/ - for(i = 2 ; i <= 35 ; i++) - { - switch(i) - { - case 2: /* Memory type (DDR / SDRAM) */ - dimmInfo->memoryType = (data[i] == 0x7)? DDR:SDRAM; - #ifdef DEBUG - if (dimmInfo->memoryType == 0) - DP(printf("Dram_type in slot %d is: SDRAM\n", dimmInfo->slot)); - if (dimmInfo->memoryType == 1) - DP(printf("Dram_type in slot %d is: DDRAM\n", dimmInfo->slot)); - #endif - break; + for (i = 2; i <= 35; i++) { + switch (i) { + case 2: /* Memory type (DDR / SDRAM) */ + dimmInfo->memoryType = (data[i] == 0x7) ? DDR : SDRAM; +#ifdef DEBUG + if (dimmInfo->memoryType == 0) + DP (printf + ("Dram_type in slot %d is: SDRAM\n", + dimmInfo->slot)); + if (dimmInfo->memoryType == 1) + DP (printf + ("Dram_type in slot %d is: DDRAM\n", + dimmInfo->slot)); +#endif + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 3: /* Number Of Row Addresses */ - dimmInfo->numOfRowAddresses = data[i]; - DP(printf("Module Number of row addresses: %d\n", dimmInfo->numOfRowAddresses)); - break; + case 3: /* Number Of Row Addresses */ + dimmInfo->numOfRowAddresses = data[i]; + DP (printf + ("Module Number of row addresses: %d\n", + dimmInfo->numOfRowAddresses)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 4: /* Number Of Column Addresses */ - dimmInfo->numOfColAddresses = data[i]; - DP(printf("Module Number of col addresses: %d\n", dimmInfo->numOfColAddresses)); - break; + case 4: /* Number Of Column Addresses */ + dimmInfo->numOfColAddresses = data[i]; + DP (printf + ("Module Number of col addresses: %d\n", + dimmInfo->numOfColAddresses)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 5: /* Number Of Module Banks */ - dimmInfo->numOfModuleBanks = data[i]; - DP(printf("Number of Banks on Mod. : %d\n", dimmInfo->numOfModuleBanks)); - break; + case 5: /* Number Of Module Banks */ + dimmInfo->numOfModuleBanks = data[i]; + DP (printf + ("Number of Banks on Mod. : %d\n", + dimmInfo->numOfModuleBanks)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 6: /* Data Width */ - dimmInfo->dataWidth = data[i]; - DP(printf("Module Data Width: %d\n", dimmInfo->dataWidth)); - break; + case 6: /* Data Width */ + dimmInfo->dataWidth = data[i]; + DP (printf + ("Module Data Width: %d\n", + dimmInfo->dataWidth)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 8: /* Voltage Interface */ - switch(data[i]) - { - case 0x0: - dimmInfo->voltageInterface = TTL_5V_TOLERANT; - DP(printf("Module is TTL_5V_TOLERANT\n")); - break; - case 0x1: - dimmInfo->voltageInterface = LVTTL; - DP(printf("Module is LVTTL\n")); - break; - case 0x2: - dimmInfo->voltageInterface = HSTL_1_5V; - DP(printf("Module is TTL_5V_TOLERANT\n")); - break; - case 0x3: - dimmInfo->voltageInterface = SSTL_3_3V; - DP(printf("Module is HSTL_1_5V\n")); - break; - case 0x4: - dimmInfo->voltageInterface = SSTL_2_5V; - DP(printf("Module is SSTL_2_5V\n")); - break; - default: - dimmInfo->voltageInterface = VOLTAGE_UNKNOWN; - DP(printf("Module is VOLTAGE_UNKNOWN\n")); - break; - } - break; + case 8: /* Voltage Interface */ + switch (data[i]) { + case 0x0: + dimmInfo->voltageInterface = TTL_5V_TOLERANT; + DP (printf + ("Module is TTL_5V_TOLERANT\n")); + break; + case 0x1: + dimmInfo->voltageInterface = LVTTL; + DP (printf + ("Module is LVTTL\n")); + break; + case 0x2: + dimmInfo->voltageInterface = HSTL_1_5V; + DP (printf + ("Module is TTL_5V_TOLERANT\n")); + break; + case 0x3: + dimmInfo->voltageInterface = SSTL_3_3V; + DP (printf + ("Module is HSTL_1_5V\n")); + break; + case 0x4: + dimmInfo->voltageInterface = SSTL_2_5V; + DP (printf + ("Module is SSTL_2_5V\n")); + break; + default: + dimmInfo->voltageInterface = VOLTAGE_UNKNOWN; + DP (printf + ("Module is VOLTAGE_UNKNOWN\n")); + break; + } + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 9: /* Minimum Cycle Time At Max CasLatancy */ - shift = (dimmInfo->memoryType == DDR)? 4:2; - mult = (dimmInfo->memoryType == DDR)? 10:25; - maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc; - maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03; - leftOfPoint = (data[i] & maskLeftOfPoint) >> shift; - rightOfPoint = (data[i] & maskRightOfPoint)* mult; - dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP = leftOfPoint; - dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP = rightOfPoint; - DP(printf("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n",leftOfPoint, rightOfPoint)); - break; + case 9: /* Minimum Cycle Time At Max CasLatancy */ + shift = (dimmInfo->memoryType == DDR) ? 4 : 2; + mult = (dimmInfo->memoryType == DDR) ? 10 : 25; + maskLeftOfPoint = + (dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc; + maskRightOfPoint = + (dimmInfo->memoryType == DDR) ? 0xf : 0x03; + leftOfPoint = (data[i] & maskLeftOfPoint) >> shift; + rightOfPoint = (data[i] & maskRightOfPoint) * mult; + dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP = + leftOfPoint; + dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP = + rightOfPoint; + DP (printf + ("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n", + leftOfPoint, rightOfPoint)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 10: /* Clock To Data Out */ - div = (dimmInfo->memoryType == DDR)? 100:10; - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / div; - rightOfPoint = time_tmp % div; - dimmInfo->clockToDataOut_LoP = leftOfPoint; - dimmInfo->clockToDataOut_RoP = rightOfPoint; - DP(printf("Clock To Data Out: %d.%2d [ns]\n",leftOfPoint, rightOfPoint )); - /*dimmInfo->clockToDataOut*/ - break; + case 10: /* Clock To Data Out */ + div = (dimmInfo->memoryType == DDR) ? 100 : 10; + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / div; + rightOfPoint = time_tmp % div; + dimmInfo->clockToDataOut_LoP = leftOfPoint; + dimmInfo->clockToDataOut_RoP = rightOfPoint; + DP (printf + ("Clock To Data Out: %d.%2d [ns]\n", + leftOfPoint, rightOfPoint)); + /*dimmInfo->clockToDataOut */ + break; /*------------------------------------------------------------------------------------------------------------------------------*/ #ifdef CONFIG_ECC - case 11: /* Error Check Type */ - dimmInfo->errorCheckType = data[i]; - DP(printf("Error Check Type (0=NONE): %d\n", dimmInfo->errorCheckType)); - break; + case 11: /* Error Check Type */ + dimmInfo->errorCheckType = data[i]; + DP (printf + ("Error Check Type (0=NONE): %d\n", + dimmInfo->errorCheckType)); + break; #endif /*------------------------------------------------------------------------------------------------------------------------------*/ - case 12: /* Refresh Interval */ - dimmInfo->RefreshInterval = data[i]; - DP(printf("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n", dimmInfo->RefreshInterval)); - break; + case 12: /* Refresh Interval */ + dimmInfo->RefreshInterval = data[i]; + DP (printf + ("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n", + dimmInfo->RefreshInterval)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 13: /* Sdram Width */ - dimmInfo->sdramWidth = data[i]; - DP(printf("Sdram Width: %d\n", dimmInfo->sdramWidth)); - break; + case 13: /* Sdram Width */ + dimmInfo->sdramWidth = data[i]; + DP (printf + ("Sdram Width: %d\n", + dimmInfo->sdramWidth)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 14: /* Error Check Data Width */ - dimmInfo->errorCheckDataWidth = data[i]; - DP(printf("Error Check Data Width: %d\n", dimmInfo->errorCheckDataWidth)); - break; + case 14: /* Error Check Data Width */ + dimmInfo->errorCheckDataWidth = data[i]; + DP (printf + ("Error Check Data Width: %d\n", + dimmInfo->errorCheckDataWidth)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 15: /* Minimum Clock Delay */ - dimmInfo->minClkDelay = data[i]; - DP(printf("Minimum Clock Delay: %d\n", dimmInfo->minClkDelay)); - break; + case 15: /* Minimum Clock Delay */ + dimmInfo->minClkDelay = data[i]; + DP (printf + ("Minimum Clock Delay: %d\n", + dimmInfo->minClkDelay)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 16: /* Burst Length Supported */ - /******-******-******-******* - * bit3 | bit2 | bit1 | bit0 * - *******-******-******-******* - burst length = * 8 | 4 | 2 | 1 * - ***************************** + case 16: /* Burst Length Supported */ + /******-******-******-******* + * bit3 | bit2 | bit1 | bit0 * + *******-******-******-******* + burst length = * 8 | 4 | 2 | 1 * + ***************************** - If for example bit0 and bit2 are set, the burst - length supported are 1 and 4. */ + If for example bit0 and bit2 are set, the burst + length supported are 1 and 4. */ - dimmInfo->burstLengthSupported = data[i]; + dimmInfo->burstLengthSupported = data[i]; #ifdef DEBUG - DP(printf("Burst Length Supported: ")); - if (dimmInfo->burstLengthSupported & 0x01) - DP(printf("1, ")); - if (dimmInfo->burstLengthSupported & 0x02) - DP(printf("2, ")); - if (dimmInfo->burstLengthSupported & 0x04) - DP(printf("4, ")); - if (dimmInfo->burstLengthSupported & 0x08) - DP(printf("8, ")); - DP(printf(" Bit \n")); + DP (printf + ("Burst Length Supported: ")); + if (dimmInfo->burstLengthSupported & 0x01) + DP (printf ("1, ")); + if (dimmInfo->burstLengthSupported & 0x02) + DP (printf ("2, ")); + if (dimmInfo->burstLengthSupported & 0x04) + DP (printf ("4, ")); + if (dimmInfo->burstLengthSupported & 0x08) + DP (printf ("8, ")); + DP (printf (" Bit \n")); #endif - break; + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 17: /* Number Of Banks On Each Device */ - dimmInfo->numOfBanksOnEachDevice = data[i]; - DP(printf("Number Of Banks On Each Chip: %d\n", dimmInfo->numOfBanksOnEachDevice)); - break; + case 17: /* Number Of Banks On Each Device */ + dimmInfo->numOfBanksOnEachDevice = data[i]; + DP (printf + ("Number Of Banks On Each Chip: %d\n", + dimmInfo->numOfBanksOnEachDevice)); + break; /*------------------------------------------------------------------------------------------------------------------------------*/ - case 18: /* Suported Cas Latencies */ + case 18: /* Suported Cas Latencies */ - /* DDR: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | TBD | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * - ********************************************************* - SDRAM: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * - ********************************************************/ - dimmInfo->suportedCasLatencies = data[i]; + /* DDR: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | TBD | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * + ********************************************************* + SDRAM: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * + ********************************************************/ + dimmInfo->suportedCasLatencies = data[i]; #ifdef DEBUG - DP(printf("Suported Cas Latencies: (CL) ")); - if (dimmInfo->memoryType == 0) /* SDRAM*/ - { - for (k = 0; k <=7; k++) - { - if (dimmInfo->suportedCasLatencies & (1 << k)) - DP(printf("%d, ", k+1)); - } + DP (printf + ("Suported Cas Latencies: (CL) ")); + if (dimmInfo->memoryType == 0) { /* SDRAM */ + for (k = 0; k <= 7; k++) { + if (dimmInfo-> + suportedCasLatencies & (1 << k)) + DP (printf + ("%d, ", + k + 1)); + } - } - else /* DDR-RAM*/ - { - if (dimmInfo->suportedCasLatencies & 1) - DP(printf("1, ")); - if (dimmInfo->suportedCasLatencies & 2) - DP(printf("1.5, ")); - if (dimmInfo->suportedCasLatencies & 4) - DP(printf("2, ")); - if (dimmInfo->suportedCasLatencies & 8) - DP(printf("2.5, ")); - if (dimmInfo->suportedCasLatencies & 16) - DP(printf("3, ")); - if (dimmInfo->suportedCasLatencies & 32) - DP(printf("3.5, ")); + } else { /* DDR-RAM */ - } - DP(printf("\n")); + if (dimmInfo->suportedCasLatencies & 1) + DP (printf ("1, ")); + if (dimmInfo->suportedCasLatencies & 2) + DP (printf ("1.5, ")); + if (dimmInfo->suportedCasLatencies & 4) + DP (printf ("2, ")); + if (dimmInfo->suportedCasLatencies & 8) + DP (printf ("2.5, ")); + if (dimmInfo->suportedCasLatencies & 16) + DP (printf ("3, ")); + if (dimmInfo->suportedCasLatencies & 32) + DP (printf ("3.5, ")); + + } + DP (printf ("\n")); #endif - /* Calculating MAX CAS latency */ - for(j = 7 ; j > 0 ; j--) - { - if(((dimmInfo->suportedCasLatencies >> j) & 0x1) == 1) - { - switch(dimmInfo->memoryType) - { - case DDR: - /* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */ - switch (j) + /* Calculating MAX CAS latency */ + for (j = 7; j > 0; j--) { + if (((dimmInfo-> + suportedCasLatencies >> j) & 0x1) == + 1) { + switch (dimmInfo->memoryType) { + case DDR: + /* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */ + switch (j) { + case 7: + DP (printf + ("Max. Cas Latencies (DDR): ERROR !!!\n")); + dimmInfo-> + maxClSupported_DDR + = + DDR_CL_FAULT; + hang (); + break; + case 6: + DP (printf + ("Max. Cas Latencies (DDR): ERROR !!!\n")); + dimmInfo-> + maxClSupported_DDR + = + DDR_CL_FAULT; + hang (); + break; + case 5: + DP (printf + ("Max. Cas Latencies (DDR): 3.5 clk's\n")); + dimmInfo-> + maxClSupported_DDR + = DDR_CL_3_5; + break; + case 4: + DP (printf + ("Max. Cas Latencies (DDR): 3 clk's \n")); + dimmInfo-> + maxClSupported_DDR + = DDR_CL_3; + break; + case 3: + DP (printf + ("Max. Cas Latencies (DDR): 2.5 clk's \n")); + dimmInfo-> + maxClSupported_DDR + = DDR_CL_2_5; + break; + case 2: + DP (printf + ("Max. Cas Latencies (DDR): 2 clk's \n")); + dimmInfo-> + maxClSupported_DDR + = DDR_CL_2; + break; + case 1: + DP (printf + ("Max. Cas Latencies (DDR): 1.5 clk's \n")); + dimmInfo-> + maxClSupported_DDR + = DDR_CL_1_5; + break; + } + dimmInfo-> + maxCASlatencySupported_LoP + = + 1 + + (int) (5 * j / 10); + if (((5 * j) % 10) != 0) + dimmInfo-> + maxCASlatencySupported_RoP + = 5; + else + dimmInfo-> + maxCASlatencySupported_RoP + = 0; + DP (printf + ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", + dimmInfo-> + maxCASlatencySupported_LoP, + dimmInfo-> + maxCASlatencySupported_RoP)); + break; + case SDRAM: + /* CAS latency 1, 2, 3, 4, 5, 6, 7 */ + dimmInfo->maxClSupported_SD = j; /* Cas Latency DDR-RAM Coded */ + DP (printf + ("Max. Cas Latencies (SD): %d\n", + dimmInfo-> + maxClSupported_SD)); + dimmInfo-> + maxCASlatencySupported_LoP + = j; + dimmInfo-> + maxCASlatencySupported_RoP + = 0; + DP (printf + ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", + dimmInfo-> + maxCASlatencySupported_LoP, + dimmInfo-> + maxCASlatencySupported_RoP)); + break; + } + break; + } + } + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 21: /* Buffered Address And Control Inputs */ + DP (printf ("\nModul Attributes (SPD Byte 21): \n")); + dimmInfo->bufferedAddrAndControlInputs = + data[i] & BIT0; + dimmInfo->registeredAddrAndControlInputs = + (data[i] & BIT1) >> 1; + dimmInfo->onCardPLL = (data[i] & BIT2) >> 2; + dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3; + dimmInfo->registeredDQMBinputs = + (data[i] & BIT4) >> 4; + dimmInfo->differentialClockInput = + (data[i] & BIT5) >> 5; + dimmInfo->redundantRowAddressing = + (data[i] & BIT6) >> 6; +#ifdef DEBUG + if (dimmInfo->bufferedAddrAndControlInputs == 1) + DP (printf + (" - Buffered Address/Control Input: Yes \n")); + else + DP (printf + (" - Buffered Address/Control Input: No \n")); + + if (dimmInfo->registeredAddrAndControlInputs == 1) + DP (printf + (" - Registered Address/Control Input: Yes \n")); + else + DP (printf + (" - Registered Address/Control Input: No \n")); + + if (dimmInfo->onCardPLL == 1) + DP (printf + (" - On-Card PLL (clock): Yes \n")); + else + DP (printf + (" - On-Card PLL (clock): No \n")); + + if (dimmInfo->bufferedDQMBinputs == 1) + DP (printf + (" - Bufferd DQMB Inputs: Yes \n")); + else + DP (printf + (" - Bufferd DQMB Inputs: No \n")); + + if (dimmInfo->registeredDQMBinputs == 1) + DP (printf + (" - Registered DQMB Inputs: Yes \n")); + else + DP (printf + (" - Registered DQMB Inputs: No \n")); + + if (dimmInfo->differentialClockInput == 1) + DP (printf + (" - Differential Clock Input: Yes \n")); + else + DP (printf + (" - Differential Clock Input: No \n")); + + if (dimmInfo->redundantRowAddressing == 1) + DP (printf + (" - redundant Row Addressing: Yes \n")); + else + DP (printf + (" - redundant Row Addressing: No \n")); + +#endif + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 22: /* Suported AutoPreCharge */ + DP (printf ("\nModul Attributes (SPD Byte 22): \n")); + dimmInfo->suportedEarlyRasPreCharge = data[i] & BIT0; + dimmInfo->suportedAutoPreCharge = + (data[i] & BIT1) >> 1; + dimmInfo->suportedPreChargeAll = + (data[i] & BIT2) >> 2; + dimmInfo->suportedWrite1ReadBurst = + (data[i] & BIT3) >> 3; + dimmInfo->suported5PercentLowVCC = + (data[i] & BIT4) >> 4; + dimmInfo->suported5PercentUpperVCC = + (data[i] & BIT5) >> 5; +#ifdef DEBUG + if (dimmInfo->suportedEarlyRasPreCharge == 1) + DP (printf + (" - Early Ras Precharge: Yes \n")); + else + DP (printf + (" - Early Ras Precharge: No \n")); + + if (dimmInfo->suportedAutoPreCharge == 1) + DP (printf + (" - AutoPreCharge: Yes \n")); + else + DP (printf + (" - AutoPreCharge: No \n")); + + if (dimmInfo->suportedPreChargeAll == 1) + DP (printf + (" - Precharge All: Yes \n")); + else + DP (printf + (" - Precharge All: No \n")); + + if (dimmInfo->suportedWrite1ReadBurst == 1) + DP (printf + (" - Write 1/ReadBurst: Yes \n")); + else + DP (printf + (" - Write 1/ReadBurst: No \n")); + + if (dimmInfo->suported5PercentLowVCC == 1) + DP (printf + (" - lower VCC tolerance: 5 Percent \n")); + else + DP (printf + (" - lower VCC tolerance: 10 Percent \n")); + + if (dimmInfo->suported5PercentUpperVCC == 1) + DP (printf + (" - upper VCC tolerance: 5 Percent \n")); + else + DP (printf + (" - upper VCC tolerance: 10 Percent \n")); + +#endif + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 23: /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */ + shift = (dimmInfo->memoryType == DDR) ? 4 : 2; + mult = (dimmInfo->memoryType == DDR) ? 10 : 25; + maskLeftOfPoint = + (dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc; + maskRightOfPoint = + (dimmInfo->memoryType == DDR) ? 0xf : 0x03; + leftOfPoint = (data[i] & maskLeftOfPoint) >> shift; + rightOfPoint = (data[i] & maskRightOfPoint) * mult; + dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP = + leftOfPoint; + dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP = + rightOfPoint; + DP (printf + ("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", + leftOfPoint, rightOfPoint)); + /*dimmInfo->minimumCycleTimeAtMaxCasLatancy */ + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 24: /* Clock To Data Out 2nd highest Cas Latency Value */ + div = (dimmInfo->memoryType == DDR) ? 100 : 10; + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / div; + rightOfPoint = time_tmp % div; + dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint; + dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint; + DP (printf + ("Clock To Data Out (2nd CL value): %d.%2d [ns]\n", + leftOfPoint, rightOfPoint)); + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 25: /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */ + shift = (dimmInfo->memoryType == DDR) ? 4 : 2; + mult = (dimmInfo->memoryType == DDR) ? 10 : 25; + maskLeftOfPoint = + (dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc; + maskRightOfPoint = + (dimmInfo->memoryType == DDR) ? 0xf : 0x03; + leftOfPoint = (data[i] & maskLeftOfPoint) >> shift; + rightOfPoint = (data[i] & maskRightOfPoint) * mult; + dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP = + leftOfPoint; + dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP = + rightOfPoint; + DP (printf + ("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", + leftOfPoint, rightOfPoint)); + /*dimmInfo->minimumCycleTimeAtMaxCasLatancy */ + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 26: /* Clock To Data Out 3rd highest Cas Latency Value */ + div = (dimmInfo->memoryType == DDR) ? 100 : 10; + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / div; + rightOfPoint = time_tmp % div; + dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint; + dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint; + DP (printf + ("Clock To Data Out (3rd CL value): %d.%2d [ns]\n", + leftOfPoint, rightOfPoint)); + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 27: /* Minimum Row Precharge Time */ + shift = (dimmInfo->memoryType == DDR) ? 2 : 0; + maskLeftOfPoint = + (dimmInfo->memoryType == DDR) ? 0xfc : 0xff; + maskRightOfPoint = + (dimmInfo->memoryType == DDR) ? 0x03 : 0x00; + leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (data[i] & maskRightOfPoint) * 25; + + dimmInfo->minRowPrechargeTime = ((leftOfPoint * 100) + rightOfPoint); /* measured in n times 10ps Intervals */ + trp_clocks = + (dimmInfo->minRowPrechargeTime + + (tmemclk - 1)) / tmemclk; + DP (printf + ("*** 1 clock cycle = %ld 10ps intervalls = %ld.%ld ns****\n", + tmemclk, tmemclk / 100, tmemclk % 100)); + DP (printf + ("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks)); + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 28: /* Minimum Row Active to Row Active Time */ + shift = (dimmInfo->memoryType == DDR) ? 2 : 0; + maskLeftOfPoint = + (dimmInfo->memoryType == DDR) ? 0xfc : 0xff; + maskRightOfPoint = + (dimmInfo->memoryType == DDR) ? 0x03 : 0x00; + leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (data[i] & maskRightOfPoint) * 25; + + dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint); /* measured in 100ns Intervals */ + trrd_clocks = + (dimmInfo->minRowActiveRowActiveDelay + + (tmemclk - 1)) / tmemclk; + DP (printf + ("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks)); + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 29: /* Minimum Ras-To-Cas Delay */ + shift = (dimmInfo->memoryType == DDR) ? 2 : 0; + maskLeftOfPoint = + (dimmInfo->memoryType == DDR) ? 0xfc : 0xff; + maskRightOfPoint = + (dimmInfo->memoryType == DDR) ? 0x03 : 0x00; + leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (data[i] & maskRightOfPoint) * 25; + + dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint); /* measured in 100ns Intervals */ + trcd_clocks = + (dimmInfo->minRowActiveRowActiveDelay + + (tmemclk - 1)) / tmemclk; + DP (printf + ("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks)); + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 30: /* Minimum Ras Pulse Width */ + dimmInfo->minRasPulseWidth = data[i]; + tras_clocks = + (NSto10PS (data[i]) + + (tmemclk - 1)) / tmemclk; + DP (printf + ("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n", + dimmInfo->minRasPulseWidth, tras_clocks)); + + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 31: /* Module Bank Density */ + dimmInfo->moduleBankDensity = data[i]; + DP (printf + ("Module Bank Density: %d\n", + dimmInfo->moduleBankDensity)); +#ifdef DEBUG + DP (printf + ("*** Offered Densities (more than 1 = Multisize-Module): ")); { - case 7: - DP(printf("Max. Cas Latencies (DDR): ERROR !!!\n")); - dimmInfo->maxClSupported_DDR = DDR_CL_FAULT; - hang(); - break; - case 6: - DP(printf("Max. Cas Latencies (DDR): ERROR !!!\n")); - dimmInfo->maxClSupported_DDR = DDR_CL_FAULT; - hang(); - break; - case 5: - DP(printf("Max. Cas Latencies (DDR): 3.5 clk's\n")); - dimmInfo->maxClSupported_DDR = DDR_CL_3_5; - break; - case 4: - DP(printf("Max. Cas Latencies (DDR): 3 clk's \n")); - dimmInfo->maxClSupported_DDR = DDR_CL_3; - break; - case 3: - DP(printf("Max. Cas Latencies (DDR): 2.5 clk's \n")); - dimmInfo->maxClSupported_DDR = DDR_CL_2_5; - break; - case 2: - DP(printf("Max. Cas Latencies (DDR): 2 clk's \n")); - dimmInfo->maxClSupported_DDR = DDR_CL_2; - break; - case 1: - DP(printf("Max. Cas Latencies (DDR): 1.5 clk's \n")); - dimmInfo->maxClSupported_DDR = DDR_CL_1_5; - break; + if (dimmInfo->moduleBankDensity & 1) + DP (printf ("4MB, ")); + if (dimmInfo->moduleBankDensity & 2) + DP (printf ("8MB, ")); + if (dimmInfo->moduleBankDensity & 4) + DP (printf ("16MB, ")); + if (dimmInfo->moduleBankDensity & 8) + DP (printf ("32MB, ")); + if (dimmInfo->moduleBankDensity & 16) + DP (printf ("64MB, ")); + if (dimmInfo->moduleBankDensity & 32) + DP (printf ("128MB, ")); + if ((dimmInfo->moduleBankDensity & 64) + || (dimmInfo->moduleBankDensity & 128)) { + DP (printf ("ERROR, ")); + hang (); + } } - dimmInfo->maxCASlatencySupported_LoP = 1 + (int) (5 * j /10); - if (((5*j) % 10) != 0) - dimmInfo->maxCASlatencySupported_RoP = 5; - else - dimmInfo->maxCASlatencySupported_RoP = 0; - DP(printf("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", dimmInfo->maxCASlatencySupported_LoP, dimmInfo->maxCASlatencySupported_RoP)); - break; - case SDRAM: - /* CAS latency 1, 2, 3, 4, 5, 6, 7 */ - dimmInfo->maxClSupported_SD = j; /* Cas Latency DDR-RAM Coded */ - DP(printf("Max. Cas Latencies (SD): %d\n", dimmInfo->maxClSupported_SD)); - dimmInfo->maxCASlatencySupported_LoP = j ; - dimmInfo->maxCASlatencySupported_RoP = 0; - DP(printf("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", dimmInfo->maxCASlatencySupported_LoP, dimmInfo->maxCASlatencySupported_RoP)); - break; - } - break; + DP (printf ("\n")); +#endif + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 32: /* Address And Command Setup Time (measured in ns/1000) */ + sign = 1; + switch (dimmInfo->memoryType) { + case DDR: + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + break; + case SDRAM: + leftOfPoint = (data[i] & 0xf0) >> 4; + if (leftOfPoint > 7) { + leftOfPoint = data[i] & 0x70 >> 4; + sign = -1; + } + rightOfPoint = (data[i] & 0x0f); + break; + } + dimmInfo->addrAndCommandSetupTime = + (leftOfPoint * 100 + rightOfPoint) * sign; + DP (printf + ("Address And Command Setup Time [ns]: %d.%d\n", + sign * leftOfPoint, rightOfPoint)); + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 33: /* Address And Command Hold Time */ + sign = 1; + switch (dimmInfo->memoryType) { + case DDR: + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + break; + case SDRAM: + leftOfPoint = (data[i] & 0xf0) >> 4; + if (leftOfPoint > 7) { + leftOfPoint = data[i] & 0x70 >> 4; + sign = -1; + } + rightOfPoint = (data[i] & 0x0f); + break; + } + dimmInfo->addrAndCommandHoldTime = + (leftOfPoint * 100 + rightOfPoint) * sign; + DP (printf + ("Address And Command Hold Time [ns]: %d.%d\n", + sign * leftOfPoint, rightOfPoint)); + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 34: /* Data Input Setup Time */ + sign = 1; + switch (dimmInfo->memoryType) { + case DDR: + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + break; + case SDRAM: + leftOfPoint = (data[i] & 0xf0) >> 4; + if (leftOfPoint > 7) { + leftOfPoint = data[i] & 0x70 >> 4; + sign = -1; + } + rightOfPoint = (data[i] & 0x0f); + break; + } + dimmInfo->dataInputSetupTime = + (leftOfPoint * 100 + rightOfPoint) * sign; + DP (printf + ("Data Input Setup Time [ns]: %d.%d\n", + sign * leftOfPoint, rightOfPoint)); + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ + + case 35: /* Data Input Hold Time */ + sign = 1; + switch (dimmInfo->memoryType) { + case DDR: + time_tmp = + (((data[i] & 0xf0) >> 4) * 10) + + ((data[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + break; + case SDRAM: + leftOfPoint = (data[i] & 0xf0) >> 4; + if (leftOfPoint > 7) { + leftOfPoint = data[i] & 0x70 >> 4; + sign = -1; + } + rightOfPoint = (data[i] & 0x0f); + break; + } + dimmInfo->dataInputHoldTime = + (leftOfPoint * 100 + rightOfPoint) * sign; + DP (printf + ("Data Input Hold Time [ns]: %d.%d\n\n", + sign * leftOfPoint, rightOfPoint)); + break; +/*------------------------------------------------------------------------------------------------------------------------------*/ } - } - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 21: /* Buffered Address And Control Inputs */ - DP(printf("\nModul Attributes (SPD Byte 21): \n")); - dimmInfo->bufferedAddrAndControlInputs = data[i] & BIT0; - dimmInfo->registeredAddrAndControlInputs = (data[i] & BIT1) >> 1; - dimmInfo->onCardPLL = (data[i] & BIT2) >> 2; - dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3; - dimmInfo->registeredDQMBinputs = (data[i] & BIT4) >> 4; - dimmInfo->differentialClockInput = (data[i] & BIT5) >> 5; - dimmInfo->redundantRowAddressing = (data[i] & BIT6) >> 6; -#ifdef DEBUG - if (dimmInfo->bufferedAddrAndControlInputs == 1) - DP(printf(" - Buffered Address/Control Input: Yes \n")); - else - DP(printf(" - Buffered Address/Control Input: No \n")); - - if (dimmInfo->registeredAddrAndControlInputs == 1) - DP(printf(" - Registered Address/Control Input: Yes \n")); - else - DP(printf(" - Registered Address/Control Input: No \n")); - - if (dimmInfo->onCardPLL == 1) - DP(printf(" - On-Card PLL (clock): Yes \n")); - else - DP(printf(" - On-Card PLL (clock): No \n")); - - if (dimmInfo->bufferedDQMBinputs == 1) - DP(printf(" - Bufferd DQMB Inputs: Yes \n")); - else - DP(printf(" - Bufferd DQMB Inputs: No \n")); - - if (dimmInfo->registeredDQMBinputs == 1) - DP(printf(" - Registered DQMB Inputs: Yes \n")); - else - DP(printf(" - Registered DQMB Inputs: No \n")); - - if (dimmInfo->differentialClockInput == 1) - DP(printf(" - Differential Clock Input: Yes \n")); - else - DP(printf(" - Differential Clock Input: No \n")); - - if (dimmInfo->redundantRowAddressing == 1) - DP(printf(" - redundant Row Addressing: Yes \n")); - else - DP(printf(" - redundant Row Addressing: No \n")); - -#endif - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 22: /* Suported AutoPreCharge */ - DP(printf("\nModul Attributes (SPD Byte 22): \n")); - dimmInfo->suportedEarlyRasPreCharge= data[i] & BIT0; - dimmInfo->suportedAutoPreCharge = (data[i] & BIT1) >> 1; - dimmInfo->suportedPreChargeAll = (data[i] & BIT2) >> 2; - dimmInfo->suportedWrite1ReadBurst= (data[i] & BIT3) >> 3; - dimmInfo->suported5PercentLowVCC= (data[i] & BIT4) >> 4; - dimmInfo->suported5PercentUpperVCC= (data[i] & BIT5) >> 5; -#ifdef DEBUG - if (dimmInfo->suportedEarlyRasPreCharge == 1) - DP(printf(" - Early Ras Precharge: Yes \n")); - else - DP(printf(" - Early Ras Precharge: No \n")); - - if (dimmInfo->suportedAutoPreCharge == 1) - DP(printf(" - AutoPreCharge: Yes \n")); - else - DP(printf(" - AutoPreCharge: No \n")); - - if (dimmInfo->suportedPreChargeAll == 1) - DP(printf(" - Precharge All: Yes \n")); - else - DP(printf(" - Precharge All: No \n")); - - if (dimmInfo->suportedWrite1ReadBurst == 1) - DP(printf(" - Write 1/ReadBurst: Yes \n")); - else - DP(printf(" - Write 1/ReadBurst: No \n")); - - if (dimmInfo->suported5PercentLowVCC == 1) - DP(printf(" - lower VCC tolerance: 5 Percent \n")); - else - DP(printf(" - lower VCC tolerance: 10 Percent \n")); - - if (dimmInfo->suported5PercentUpperVCC == 1) - DP(printf(" - upper VCC tolerance: 5 Percent \n")); - else - DP(printf(" - upper VCC tolerance: 10 Percent \n")); - -#endif - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 23: /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */ - shift = (dimmInfo->memoryType == DDR)? 4:2; - mult = (dimmInfo->memoryType == DDR)? 10:25; - maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc; - maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03; - leftOfPoint = (data[i] & maskLeftOfPoint) >> shift; - rightOfPoint = (data[i] & maskRightOfPoint)* mult; - dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP = leftOfPoint; - dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP = rightOfPoint; - DP(printf("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",leftOfPoint, rightOfPoint )); - /*dimmInfo->minimumCycleTimeAtMaxCasLatancy*/ - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/ - div = (dimmInfo->memoryType == DDR)? 100:10; - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / div; - rightOfPoint = time_tmp % div; - dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint; - dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint; - DP(printf("Clock To Data Out (2nd CL value): %d.%2d [ns]\n",leftOfPoint, rightOfPoint )); - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 25: /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */ - shift = (dimmInfo->memoryType == DDR)? 4:2; - mult = (dimmInfo->memoryType == DDR)? 10:25; - maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc; - maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03; - leftOfPoint = (data[i] & maskLeftOfPoint) >> shift; - rightOfPoint = (data[i] & maskRightOfPoint)* mult; - dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP = leftOfPoint; - dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP = rightOfPoint; - DP(printf("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",leftOfPoint, rightOfPoint )); - /*dimmInfo->minimumCycleTimeAtMaxCasLatancy*/ - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/ - div = (dimmInfo->memoryType == DDR)? 100:10; - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / div; - rightOfPoint = time_tmp % div; - dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint; - dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint; - DP(printf("Clock To Data Out (3rd CL value): %d.%2d [ns]\n",leftOfPoint, rightOfPoint )); - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 27: /* Minimum Row Precharge Time */ - shift = (dimmInfo->memoryType == DDR)? 2:0; - maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff; - maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00; - leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift); - rightOfPoint = (data[i] & maskRightOfPoint)*25; - - dimmInfo->minRowPrechargeTime = ((leftOfPoint*100) + rightOfPoint); /* measured in n times 10ps Intervals */ - trp_clocks = (dimmInfo->minRowPrechargeTime + (tmemclk-1)) / tmemclk; - DP(printf("*** 1 clock cycle = %ld 10ps intervalls = %ld.%ld ns****\n", tmemclk, tmemclk/100, tmemclk%100 )); - DP(printf("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks)); - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 28: /* Minimum Row Active to Row Active Time */ - shift = (dimmInfo->memoryType == DDR)? 2:0; - maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff; - maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00; - leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift); - rightOfPoint = (data[i] & maskRightOfPoint)*25; - - dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint*100) + rightOfPoint); /* measured in 100ns Intervals */ - trrd_clocks = (dimmInfo->minRowActiveRowActiveDelay + (tmemclk-1)) / tmemclk; - DP(printf("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks)); - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 29: /* Minimum Ras-To-Cas Delay */ - shift = (dimmInfo->memoryType == DDR)? 2:0; - maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff; - maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00; - leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift); - rightOfPoint = (data[i] & maskRightOfPoint)*25; - - dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint*100) + rightOfPoint); /* measured in 100ns Intervals */ - trcd_clocks = (dimmInfo->minRowActiveRowActiveDelay + (tmemclk-1) )/ tmemclk; - DP(printf("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks)); - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 30: /* Minimum Ras Pulse Width */ - dimmInfo->minRasPulseWidth = data[i]; - tras_clocks = (NSto10PS(data[i])+(tmemclk-1)) / tmemclk; - DP(printf("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n", dimmInfo->minRasPulseWidth, tras_clocks)); - - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 31: /* Module Bank Density */ - dimmInfo->moduleBankDensity = data[i]; - DP(printf("Module Bank Density: %d\n", dimmInfo->moduleBankDensity)); -#ifdef DEBUG - DP(printf("*** Offered Densities (more than 1 = Multisize-Module): ")); - { - if (dimmInfo->moduleBankDensity & 1) - DP(printf("4MB, ")); - if (dimmInfo->moduleBankDensity & 2) - DP(printf("8MB, ")); - if (dimmInfo->moduleBankDensity & 4) - DP(printf("16MB, ")); - if (dimmInfo->moduleBankDensity & 8) - DP(printf("32MB, ")); - if (dimmInfo->moduleBankDensity & 16) - DP(printf("64MB, ")); - if (dimmInfo->moduleBankDensity & 32) - DP(printf("128MB, ")); - if ((dimmInfo->moduleBankDensity & 64) || (dimmInfo->moduleBankDensity & 128)) { - DP(printf("ERROR, ")); - hang(); - } } - DP(printf("\n")); -#endif - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ + /* calculating the sdram density */ + for (i = 0; + i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses; + i++) { + density = density * 2; + } + dimmInfo->deviceDensity = density * dimmInfo->numOfBanksOnEachDevice * + dimmInfo->sdramWidth; + dimmInfo->numberOfDevices = + (dimmInfo->dataWidth / dimmInfo->sdramWidth) * + dimmInfo->numOfModuleBanks; + devicesForErrCheck = + (dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth; + if ((dimmInfo->errorCheckType == 0x1) + || (dimmInfo->errorCheckType == 0x2) + || (dimmInfo->errorCheckType == 0x3)) { + dimmInfo->size = + (dimmInfo->deviceDensity / 8) * + (dimmInfo->numberOfDevices - devicesForErrCheck); + } else { + dimmInfo->size = + (dimmInfo->deviceDensity / 8) * + dimmInfo->numberOfDevices; + } - case 32: /* Address And Command Setup Time (measured in ns/1000) */ - sign = 1; - switch(dimmInfo->memoryType) - { - case DDR: - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - break; - case SDRAM: - leftOfPoint = (data[i] & 0xf0) >> 4; - if(leftOfPoint > 7) - { - leftOfPoint = data[i] & 0x70 >> 4; - sign = -1; - } - rightOfPoint = (data[i] & 0x0f); - break; - } - dimmInfo->addrAndCommandSetupTime = (leftOfPoint*100 + rightOfPoint) * sign; - DP(printf("Address And Command Setup Time [ns]: %d.%d\n", sign*leftOfPoint, rightOfPoint)); - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 33: /* Address And Command Hold Time */ - sign = 1; - switch(dimmInfo->memoryType) - { - case DDR: - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - break; - case SDRAM: - leftOfPoint = (data[i] & 0xf0) >> 4; - if(leftOfPoint > 7) - { - leftOfPoint = data[i] & 0x70 >> 4; - sign = -1; - } - rightOfPoint = (data[i] & 0x0f) ; - break; - } - dimmInfo->addrAndCommandHoldTime = (leftOfPoint * 100 + rightOfPoint) * sign; - DP(printf("Address And Command Hold Time [ns]: %d.%d\n", sign*leftOfPoint, rightOfPoint)); - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 34: /* Data Input Setup Time */ - sign = 1; - switch(dimmInfo->memoryType) - { - case DDR: - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - break; - case SDRAM: - leftOfPoint = (data[i] & 0xf0) >> 4; - if( leftOfPoint > 7) - { - leftOfPoint = data[i] & 0x70 >> 4; - sign = -1; - } - rightOfPoint = (data[i] & 0x0f ); - break; - } - dimmInfo->dataInputSetupTime = (leftOfPoint *100 + rightOfPoint) * sign; - DP(printf("Data Input Setup Time [ns]: %d.%d\n", sign*leftOfPoint, rightOfPoint)); - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - - case 35: /* Data Input Hold Time */ - sign = 1; - switch(dimmInfo->memoryType) - { - case DDR: - time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - break; - case SDRAM: - leftOfPoint = (data[i] & 0xf0) >> 4; - if( leftOfPoint > 7) - { - leftOfPoint = data[i] & 0x70 >> 4; - sign = -1; - } - rightOfPoint = (data[i] & 0x0f) ; - break; - } - dimmInfo->dataInputHoldTime = (leftOfPoint *100 + rightOfPoint) * sign; - DP(printf("Data Input Hold Time [ns]: %d.%d\n\n", sign*leftOfPoint, rightOfPoint)); - break; -/*------------------------------------------------------------------------------------------------------------------------------*/ - } - } - /* calculating the sdram density */ - for(i = 0;i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses;i++) - { - density = density*2; - } - dimmInfo->deviceDensity = density*dimmInfo->numOfBanksOnEachDevice* - dimmInfo->sdramWidth; - dimmInfo->numberOfDevices = (dimmInfo->dataWidth / dimmInfo->sdramWidth)* - dimmInfo->numOfModuleBanks; - devicesForErrCheck = (dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth ; - if((dimmInfo->errorCheckType == 0x1) || - (dimmInfo->errorCheckType == 0x2) || - (dimmInfo->errorCheckType == 0x3)) - { - dimmInfo->size = (dimmInfo->deviceDensity / 8)* - (dimmInfo->numberOfDevices - devicesForErrCheck); - } - else - { - dimmInfo->size = (dimmInfo->deviceDensity/8)*dimmInfo->numberOfDevices; - } - - /* compute the module DRB size */ - tmp = (1 << (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses)); - tmp *= dimmInfo->numOfModuleBanks; - tmp *= dimmInfo->sdramWidth; - tmp = tmp >> 24; /* div by 0x4000000 (64M) */ - dimmInfo->drb_size = (uchar)tmp; - DP(printf("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size)); + /* compute the module DRB size */ + tmp = (1 << + (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses)); + tmp *= dimmInfo->numOfModuleBanks; + tmp *= dimmInfo->sdramWidth; + tmp = tmp >> 24; /* div by 0x4000000 (64M) */ + dimmInfo->drb_size = (uchar) tmp; + DP (printf ("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size)); /* try a CAS latency of 3 first... */ @@ -1010,44 +1224,43 @@ check_dimm(uchar slot, AUX_MEM_DIMM_INFO *dimmInfo) cal_val = 0; if (supp_cal & 8) { - if (NS10to10PS(data[9]) <= tmemclk) + if (NS10to10PS (data[9]) <= tmemclk) cal_val = 6; } if (supp_cal & 4) { - if (NS10to10PS(data[9]) <= tmemclk) + if (NS10to10PS (data[9]) <= tmemclk) cal_val = 5; } /* then 2... */ if (supp_cal & 2) { - if (NS10to10PS(data[23]) <= tmemclk) + if (NS10to10PS (data[23]) <= tmemclk) cal_val = 4; } - DP(printf("cal_val = %d\n", cal_val*5)); + DP (printf ("cal_val = %d\n", cal_val * 5)); /* bummer, did't work... */ if (cal_val == 0) { - DP(printf("Couldn't find a good CAS latency\n")); - hang(); + DP (printf ("Couldn't find a good CAS latency\n")); + hang (); return 0; } - return true; + return true; } /* sets up the GT properly with information passed in */ -int -setup_sdram(AUX_MEM_DIMM_INFO *info) +int setup_sdram (AUX_MEM_DIMM_INFO * info) { ulong tmp, check; - ulong tmp_sdram_mode=0; /* 0x141c*/ - ulong tmp_dunit_control_low=0; /* 0x1404*/ + ulong tmp_sdram_mode = 0; /* 0x141c */ + ulong tmp_dunit_control_low = 0; /* 0x1404 */ int i; /* sanity checking */ - if (! info->numOfModuleBanks) { - printf("setup_sdram called with 0 banks\n"); + if (!info->numOfModuleBanks) { + printf ("setup_sdram called with 0 banks\n"); return 1; } @@ -1055,137 +1268,150 @@ setup_sdram(AUX_MEM_DIMM_INFO *info) /* Program the GT with the discovered data */ if (info->registeredAddrAndControlInputs == true) - DP(printf("Module is registered, but we do not support registered Modules !!!\n")); + DP (printf + ("Module is registered, but we do not support registered Modules !!!\n")); /* delay line */ - set_dfcdlInit(); /* may be its not needed */ - DP(printf("Delay line set done\n")); + set_dfcdlInit (); /* may be its not needed */ + DP (printf ("Delay line set done\n")); - /* set SDRAM mode NOP*/ /* To_do check it*/ - GT_REG_WRITE(SDRAM_OPERATION, 0x5); - while (GTREGREAD(SDRAM_OPERATION) != 0) { - DP(printf("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n")); - } + /* set SDRAM mode NOP */ /* To_do check it */ + GT_REG_WRITE (SDRAM_OPERATION, 0x5); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n")); + } /* SDRAM configuration */ - GT_REG_WRITE(SDRAM_CONFIG, 0x58200400); - DP(printf("sdram_conf 0x1400: %08x\n", GTREGREAD(SDRAM_CONFIG))); + GT_REG_WRITE (SDRAM_CONFIG, 0x58200400); + DP (printf ("sdram_conf 0x1400: %08x\n", GTREGREAD (SDRAM_CONFIG))); - /* SDRAM open pages controll keep open as much as I can*/ - GT_REG_WRITE(SDRAM_OPEN_PAGES_CONTROL, 0x0); - DP(printf("sdram_open_pages_controll 0x1414: %08x\n", GTREGREAD(SDRAM_OPEN_PAGES_CONTROL))); + /* SDRAM open pages controll keep open as much as I can */ + GT_REG_WRITE (SDRAM_OPEN_PAGES_CONTROL, 0x0); + DP (printf + ("sdram_open_pages_controll 0x1414: %08x\n", + GTREGREAD (SDRAM_OPEN_PAGES_CONTROL))); /* SDRAM D_UNIT_CONTROL_LOW 0x1404 */ - tmp = (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x01); /* Clock Domain Sync from power on reset*/ + tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01); /* Clock Domain Sync from power on reset */ if (tmp == 0) - DP(printf("Core Signals are sync (by HW-Setting)!!!\n")); + DP (printf ("Core Signals are sync (by HW-Setting)!!!\n")); else - DP(printf("Core Signals syncs. are bypassed (by HW-Setting)!!!\n")); + DP (printf + ("Core Signals syncs. are bypassed (by HW-Setting)!!!\n")); - /* SDRAM set CAS Lentency according to SPD information*/ - switch(info->memoryType) - { - case SDRAM: - DP(printf("### SD-RAM not supported yet !!!\n")); - hang(); - /* ToDo fill SD-RAM if needed !!!!!*/ - break; - - case DDR: - DP(printf("### SET-CL for DDR-RAM\n")); - - switch (info->maxClSupported_DDR) - { - case DDR_CL_3: - tmp_dunit_control_low = 0x3c000000; /* Read-Data sampled on falling edge of Clk*/ - tmp_sdram_mode = 0x32; /* CL=3 Burstlength = 4*/ - DP(printf("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); + /* SDRAM set CAS Lentency according to SPD information */ + switch (info->memoryType) { + case SDRAM: + DP (printf ("### SD-RAM not supported yet !!!\n")); + hang (); + /* ToDo fill SD-RAM if needed !!!!! */ break; - case DDR_CL_2_5: - if (tmp == 1) /* clocks sync*/ - { - tmp_dunit_control_low = 0x24000000; /* Read-Data sampled on falling edge of Clk*/ - tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4*/ - DP(printf("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - } - else /* clk sync. bypassed */ - { - tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk*/ - tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4*/ - DP(printf("Max. CL is 2,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - } - break; + case DDR: + DP (printf ("### SET-CL for DDR-RAM\n")); - case DDR_CL_2: - if (tmp == 1) /* Sync*/ - { - tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk*/ - tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4*/ - DP(printf("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - } - else /* Not sync. */ - { - tmp_dunit_control_low = 0x3b000000; /* Read-Data sampled on rising edge of Clk*/ - tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4*/ - DP(printf("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - } - break; + switch (info->maxClSupported_DDR) { + case DDR_CL_3: + tmp_dunit_control_low = 0x3c000000; /* Read-Data sampled on falling edge of Clk */ + tmp_sdram_mode = 0x32; /* CL=3 Burstlength = 4 */ + DP (printf + ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + break; - case DDR_CL_1_5: - if (tmp == 1) /* Sync*/ - { - tmp_dunit_control_low = 0x23000000; /* Read-Data sampled on falling edge of Clk*/ - tmp_sdram_mode = 0x52; /* CL=1,5 Burstlength = 4*/ - DP(printf("Max. CL is 1,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - } - else /* not sync*/ - { - tmp_dunit_control_low = 0x1a000000; /* Read-Data sampled on rising edge of Clk*/ - tmp_sdram_mode = 0x52; /* CL=1,5 Burstlength = 4*/ - DP(printf("Max. CL is 1,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low )); - } - break; + case DDR_CL_2_5: + if (tmp == 1) { /* clocks sync */ + tmp_dunit_control_low = 0x24000000; /* Read-Data sampled on falling edge of Clk */ + tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4 */ + DP (printf + ("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + } else { /* clk sync. bypassed */ - default: - printf("Max. CL is out of range %d\n", info->maxClSupported_DDR); - hang(); + tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk */ + tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4 */ + DP (printf + ("Max. CL is 2,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + } + break; + + case DDR_CL_2: + if (tmp == 1) { /* Sync */ + tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk */ + tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4 */ + DP (printf + ("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + } else { /* Not sync. */ + + tmp_dunit_control_low = 0x3b000000; /* Read-Data sampled on rising edge of Clk */ + tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4 */ + DP (printf + ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + } + break; + + case DDR_CL_1_5: + if (tmp == 1) { /* Sync */ + tmp_dunit_control_low = 0x23000000; /* Read-Data sampled on falling edge of Clk */ + tmp_sdram_mode = 0x52; /* CL=1,5 Burstlength = 4 */ + DP (printf + ("Max. CL is 1,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + } else { /* not sync */ + + tmp_dunit_control_low = 0x1a000000; /* Read-Data sampled on rising edge of Clk */ + tmp_sdram_mode = 0x52; /* CL=1,5 Burstlength = 4 */ + DP (printf + ("Max. CL is 1,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n", + tmp_sdram_mode, tmp_dunit_control_low)); + } + break; + + default: + printf ("Max. CL is out of range %d\n", + info->maxClSupported_DDR); + hang (); + break; + } break; - } - break; - } + } /* Write results of CL detection procedure */ - GT_REG_WRITE(SDRAM_MODE, tmp_sdram_mode); - /* set SDRAM mode SetCommand 0x1418*/ - GT_REG_WRITE(SDRAM_OPERATION, 0x3); - while (GTREGREAD(SDRAM_OPERATION) != 0) { - DP(printf("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); - } + GT_REG_WRITE (SDRAM_MODE, tmp_sdram_mode); + /* set SDRAM mode SetCommand 0x1418 */ + GT_REG_WRITE (SDRAM_OPERATION, 0x3); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); + } /* SDRAM D_UNIT_CONTROL_LOW 0x1404 */ - tmp = (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x01); /* Clock Domain Sync from power on reset*/ - if (tmp != 1) /*clocks are not sync*/ - { - /* asyncmode*/ - GT_REG_WRITE(D_UNIT_CONTROL_LOW , - (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x7F) | 0x18110780 | tmp_dunit_control_low ); - } - else - { - /* syncmode*/ - GT_REG_WRITE(D_UNIT_CONTROL_LOW , - (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x7F) | 0x00110000 | tmp_dunit_control_low ); - } + tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01); /* Clock Domain Sync from power on reset */ + if (tmp != 1) { /*clocks are not sync */ + /* asyncmode */ + GT_REG_WRITE (D_UNIT_CONTROL_LOW, + (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x7F) | + 0x18110780 | tmp_dunit_control_low); + } else { + /* syncmode */ + GT_REG_WRITE (D_UNIT_CONTROL_LOW, + (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x7F) | + 0x00110000 | tmp_dunit_control_low); + } - /* set SDRAM mode SetCommand 0x1418*/ - GT_REG_WRITE(SDRAM_OPERATION, 0x3); - while (GTREGREAD(SDRAM_OPERATION) != 0) { - DP(printf("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n")); - } + /* set SDRAM mode SetCommand 0x1418 */ + GT_REG_WRITE (SDRAM_OPERATION, 0x3); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n")); + } /*------------------------------------------------------------------------------ */ @@ -1196,93 +1422,113 @@ setup_sdram(AUX_MEM_DIMM_INFO *info) tmp = 0x02; - DP(printf("drb_size (n*64Mbit): %d\n", info->drb_size)); + DP (printf ("drb_size (n*64Mbit): %d\n", info->drb_size)); switch (info->drb_size) { - case 1: /* 64 Mbit */ - case 2: /* 128 Mbit */ - DP(printf("RAM-Device_size 64Mbit or 128Mbit)\n")); + case 1: /* 64 Mbit */ + case 2: /* 128 Mbit */ + DP (printf ("RAM-Device_size 64Mbit or 128Mbit)\n")); tmp |= (0x00 << 4); break; - case 4: /* 256 Mbit */ - case 8: /* 512 Mbit */ - DP(printf("RAM-Device_size 256Mbit or 512Mbit)\n")); + case 4: /* 256 Mbit */ + case 8: /* 512 Mbit */ + DP (printf ("RAM-Device_size 256Mbit or 512Mbit)\n")); tmp |= (0x01 << 4); break; - case 16: /* 1 Gbit */ - case 32: /* 2 Gbit */ - DP(printf("RAM-Device_size 1Gbit or 2Gbit)\n")); + case 16: /* 1 Gbit */ + case 32: /* 2 Gbit */ + DP (printf ("RAM-Device_size 1Gbit or 2Gbit)\n")); tmp |= (0x02 << 4); break; default: - printf("Error in dram size calculation\n"); - DP(printf("Assume: RAM-Device_size 1Gbit or 2Gbit)\n")); + printf ("Error in dram size calculation\n"); + DP (printf ("Assume: RAM-Device_size 1Gbit or 2Gbit)\n")); tmp |= (0x02 << 4); return 1; } /* SDRAM bank parameters */ /* the param registers for slot 1 (banks 2+3) are offset by 0x8 */ - DP(printf("setting up slot %d config with: %08lx \n", info->slot, tmp)); - GT_REG_WRITE(SDRAM_ADDR_CONTROL, tmp); + DP (printf + ("setting up slot %d config with: %08lx \n", info->slot, tmp)); + GT_REG_WRITE (SDRAM_ADDR_CONTROL, tmp); /* ------------------------------------------------------------------------------ */ - DP(printf("setting up sdram_timing_control_low with: %08x \n", 0x11511220)); - GT_REG_WRITE(SDRAM_TIMING_CONTROL_LOW, 0x11511220); + DP (printf + ("setting up sdram_timing_control_low with: %08x \n", + 0x11511220)); + GT_REG_WRITE (SDRAM_TIMING_CONTROL_LOW, 0x11511220); /* ------------------------------------------------------------------------------ */ /* SDRAM configuration */ - tmp = GTREGREAD(SDRAM_CONFIG); + tmp = GTREGREAD (SDRAM_CONFIG); - if (info->registeredAddrAndControlInputs || info->registeredDQMBinputs) { - tmp |= (1 << 17); - DP(printf("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",info->registeredAddrAndControlInputs, info->registeredDQMBinputs)); + if (info->registeredAddrAndControlInputs + || info->registeredDQMBinputs) { + tmp |= (1 << 17); + DP (printf + ("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n", + info->registeredAddrAndControlInputs, + info->registeredDQMBinputs)); } /* Use buffer 1 to return read data to the CPU * Page 426 MV64360 */ tmp |= (1 << 26); - DP(printf("Before Buffer assignment - sdram_conf: %08x\n", GTREGREAD(SDRAM_CONFIG))); - DP(printf("After Buffer assignment - sdram_conf: %08x\n", GTREGREAD(SDRAM_CONFIG))); + DP (printf + ("Before Buffer assignment - sdram_conf: %08x\n", + GTREGREAD (SDRAM_CONFIG))); + DP (printf + ("After Buffer assignment - sdram_conf: %08x\n", + GTREGREAD (SDRAM_CONFIG))); - /* SDRAM timing To_do:*/ + /* SDRAM timing To_do: */ - tmp = GTREGREAD(SDRAM_TIMING_CONTROL_HIGH); - DP(printf("# sdram_timing_control_high is : %08lx \n", tmp)); + tmp = GTREGREAD (SDRAM_TIMING_CONTROL_HIGH); + DP (printf ("# sdram_timing_control_high is : %08lx \n", tmp)); /* SDRAM address decode register */ /* program this with the default value */ - tmp = GTREGREAD(SDRAM_ADDR_CONTROL); - DP(printf("SDRAM address control (before: decode): %08x ", GTREGREAD(SDRAM_ADDR_CONTROL))); - GT_REG_WRITE(SDRAM_ADDR_CONTROL, (tmp | 0x2)); - DP(printf("SDRAM address control (after: decode): %08x\n", GTREGREAD(SDRAM_ADDR_CONTROL))); + tmp = GTREGREAD (SDRAM_ADDR_CONTROL); + DP (printf + ("SDRAM address control (before: decode): %08x ", + GTREGREAD (SDRAM_ADDR_CONTROL))); + GT_REG_WRITE (SDRAM_ADDR_CONTROL, (tmp | 0x2)); + DP (printf + ("SDRAM address control (after: decode): %08x\n", + GTREGREAD (SDRAM_ADDR_CONTROL))); /* set the SDRAM configuration for each bank */ /* for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */ { i = info->slot; - DP(printf("\n*** Running a MRS cycle for bank %d ***\n", i)); + DP (printf + ("\n*** Running a MRS cycle for bank %d ***\n", i)); /* map the bank */ - memory_map_bank(i, 0, GB/4); -#if 1 /* test only */ - /* set SDRAM mode */ /* To_do check it*/ - GT_REG_WRITE(SDRAM_OPERATION, 0x3); - check = GTREGREAD(SDRAM_OPERATION); - DP(printf("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", check)); + memory_map_bank (i, 0, GB / 4); +#if 1 /* test only */ + /* set SDRAM mode */ /* To_do check it */ + GT_REG_WRITE (SDRAM_OPERATION, 0x3); + check = GTREGREAD (SDRAM_OPERATION); + DP (printf + ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", + check)); /* switch back to normal operation mode */ - GT_REG_WRITE(SDRAM_OPERATION, 0); - check = GTREGREAD(SDRAM_OPERATION); - DP(printf("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", check)); + GT_REG_WRITE (SDRAM_OPERATION, 0); + check = GTREGREAD (SDRAM_OPERATION); + DP (printf + ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", + check)); #endif /* test only */ /* unmap the bank */ - memory_map_bank(i, 0, 0); + memory_map_bank (i, 0, 0); } return 0; @@ -1324,7 +1570,7 @@ dram_size(long int *base, long int maxsize) *b=save2; if (val != cnt) { - DP(printf("Found %08x at Address %08x (failure)\n", (unsigned int)val, (unsigned int) addr)); + DP(printf("Found %08x at Address %08x (failure)\n", (unsigned int)val, (unsigned int) addr)); /* fix boundary condition.. STARTVAL means zero */ if(cnt==STARTVAL/sizeof(long)) cnt=0; return (cnt * sizeof(long)); @@ -1342,7 +1588,7 @@ initdram(int board_type) { int s0 = 0, s1 = 0; int checkbank[4] = { [0 ... 3] = 0 }; - ulong bank_no, realsize, total, check; + ulong bank_no, realsize, total, check; AUX_MEM_DIMM_INFO dimmInfo1; AUX_MEM_DIMM_INFO dimmInfo2; int nhr; @@ -1407,7 +1653,7 @@ initdram(int board_type) } /* Setup Ethernet DMA Adress window to DRAM Area */ - return(total); + return(total); } /* *************************************************************************************** @@ -1422,18 +1668,16 @@ initdram(int board_type) ! * DFCDL initialize MV643xx Design Considerations * ! * * ! *************************************************************************************** */ -int -set_dfcdlInit(void) +int set_dfcdlInit (void) { - int i; - unsigned int dfcdl_word = 0x0000014f; - for (i=0 ; i < 64; i++) - { - GT_REG_WRITE(SRAM_DATA0, dfcdl_word); - } - GT_REG_WRITE(DFCDL_CONFIG0, 0x00300000); /* enable dynamic delay line updating */ + int i; + unsigned int dfcdl_word = 0x0000014f; + + for (i = 0; i < 64; i++) { + GT_REG_WRITE (SRAM_DATA0, dfcdl_word); + } + GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000); /* enable dynamic delay line updating */ - return (0); + return (0); } - diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c index 01adb33f9..44de05256 100644 --- a/board/esd/cpci750/serial.c +++ b/board/esd/cpci750/serial.c @@ -4,7 +4,7 @@ * * modified for marvell db64360 eval board by * Ingo Assmus - * + * * modified for cpci750 board by * Reinhard Arlt * diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index 27664e1d7..64690ac1b 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -278,13 +278,13 @@ int misc_init_r (void) udelay(1000); out32(GPIO0_OR, in32(GPIO0_OR) | CFG_TOUCH_RST); - /* - * Enable power on PS/2 interface (with reset) - */ - *fpga_ctrl &= ~(CFG_FPGA_CTRL_PS2_PWR); - for (i=0;i<500;i++) - udelay(1000); - *fpga_ctrl |= (CFG_FPGA_CTRL_PS2_PWR); + /* + * Enable power on PS/2 interface (with reset) + */ + *fpga_ctrl &= ~(CFG_FPGA_CTRL_PS2_PWR); + for (i=0;i<500;i++) + udelay(1000); + *fpga_ctrl |= (CFG_FPGA_CTRL_PS2_PWR); /* * Get contrast value from environment variable diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c index d586ff9fb..4bc3246a1 100644 --- a/board/esd/hub405/hub405.c +++ b/board/esd/hub405/hub405.c @@ -86,7 +86,7 @@ int misc_init_r (void) *duart2_mcr = 0x08; *duart3_mcr = 0x08; - /* + /* * Set RS232/RS422 control (RS232 = high on GPIO) */ val = in32(GPIO0_OR); diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index ae866b0b2..dbc341442 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -293,7 +293,7 @@ int misc_init_r (void) */ #define PCI0_BRDGOPT1 0x4a pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f20); -// pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f60); +/* pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f60); */ #define plb0_acr 0x87 /* @@ -303,10 +303,10 @@ int misc_init_r (void) #if 0 /* test-only */ printf("CCR0=%08x\n", mfspr(ccr0)); /* test-only */ -// mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00100000); +/* mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00100000); */ mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00000000); #endif -// printf("CCR0=%08x\n", mfspr(ccr0)); /* test-only */ +/* printf("CCR0=%08x\n", mfspr(ccr0)); /* test-only */ */ #endif free(dst); diff --git a/board/esd/pci405/writeibm.S b/board/esd/pci405/writeibm.S index b08c9ac89..9f5c35b58 100644 --- a/board/esd/pci405/writeibm.S +++ b/board/esd/pci405/writeibm.S @@ -50,186 +50,174 @@ write_without_sync: /* * Write one values to host via pci busmastering - * ptr = 0xc0000000 -> 0x01000000 (PCI) - * *ptr = 0x01234567; + * ptr = 0xc0000000 -> 0x01000000 (PCI) + * *ptr = 0x01234567; */ - addi r31,0,0 - lis r31,0xc000 + addi r31,0,0 + lis r31,0xc000 start1: - lis r0,0x0123 - ori r0,r0,0x4567 - stw r0,0(r31) + lis r0,0x0123 + ori r0,r0,0x4567 + stw r0,0(r31) /* * Read one value back - * ptr = (volatile unsigned long *)addr; - * val = *ptr; + * ptr = (volatile unsigned long *)addr; + * val = *ptr; */ - lwz r0,0(r31) + lwz r0,0(r31) /* * One pci config write - * ibmPciConfigWrite(0x2e, 2, 0x1234); + * ibmPciConfigWrite(0x2e, 2, 0x1234); */ /* subsystem id */ + li r4,0x002C + oris r4,r4,0x8000 + lis r3,0xEEC0 + stwbrx r4,0,r3 + li r5,0x1234 + ori r3,r3,0x4 + stwbrx r5,0,r3 - li r4,0x002C - oris r4,r4,0x8000 - lis r3,0xEEC0 - stwbrx r4,0,r3 - - li r5,0x1234 - ori r3,r3,0x4 - stwbrx r5,0,r3 - - b start1 + b start1 blr /* never reached !!!! */ - - .globl write_with_sync write_with_sync: /* * Write one values to host via pci busmastering - * ptr = 0xc0000000 -> 0x01000000 (PCI) - * *ptr = 0x01234567; + * ptr = 0xc0000000 -> 0x01000000 (PCI) + * *ptr = 0x01234567; */ - addi r31,0,0 - lis r31,0xc000 + addi r31,0,0 + lis r31,0xc000 start2: - lis r0,0x0123 - ori r0,r0,0x4567 - stw r0,0(r31) + lis r0,0x0123 + ori r0,r0,0x4567 + stw r0,0(r31) /* * Read one value back - * ptr = (volatile unsigned long *)addr; - * val = *ptr; + * ptr = (volatile unsigned long *)addr; + * val = *ptr; */ - lwz r0,0(r31) + lwz r0,0(r31) /* * One pci config write - * ibmPciConfigWrite(0x2e, 2, 0x1234); + * ibmPciConfigWrite(0x2e, 2, 0x1234); */ /* subsystem id */ + li r4,0x002C + oris r4,r4,0x8000 + lis r3,0xEEC0 + stwbrx r4,0,r3 + sync + li r5,0x1234 + ori r3,r3,0x4 + stwbrx r5,0,r3 + sync - li r4,0x002C - oris r4,r4,0x8000 - lis r3,0xEEC0 - stwbrx r4,0,r3 - sync - - li r5,0x1234 - ori r3,r3,0x4 - stwbrx r5,0,r3 - sync - - b start2 + b start2 blr /* never reached !!!! */ - .globl write_with_less_sync write_with_less_sync: /* * Write one values to host via pci busmastering - * ptr = 0xc0000000 -> 0x01000000 (PCI) - * *ptr = 0x01234567; + * ptr = 0xc0000000 -> 0x01000000 (PCI) + * *ptr = 0x01234567; */ - addi r31,0,0 - lis r31,0xc000 + addi r31,0,0 + lis r31,0xc000 start2b: - lis r0,0x0123 - ori r0,r0,0x4567 - stw r0,0(r31) + lis r0,0x0123 + ori r0,r0,0x4567 + stw r0,0(r31) /* * Read one value back - * ptr = (volatile unsigned long *)addr; - * val = *ptr; + * ptr = (volatile unsigned long *)addr; + * val = *ptr; */ - lwz r0,0(r31) + lwz r0,0(r31) /* * One pci config write - * ibmPciConfigWrite(0x2e, 2, 0x1234); + * ibmPciConfigWrite(0x2e, 2, 0x1234); */ /* subsystem id */ + li r4,0x002C + oris r4,r4,0x8000 + lis r3,0xEEC0 + stwbrx r4,0,r3 + sync - - li r4,0x002C - oris r4,r4,0x8000 - lis r3,0xEEC0 - stwbrx r4,0,r3 - sync - - li r5,0x1234 - ori r3,r3,0x4 - stwbrx r5,0,r3 + li r5,0x1234 + ori r3,r3,0x4 + stwbrx r5,0,r3 /* sync */ - b start2b + b start2b blr /* never reached !!!! */ - .globl write_with_more_sync write_with_more_sync: /* * Write one values to host via pci busmastering - * ptr = 0xc0000000 -> 0x01000000 (PCI) - * *ptr = 0x01234567; + * ptr = 0xc0000000 -> 0x01000000 (PCI) + * *ptr = 0x01234567; */ - addi r31,0,0 - lis r31,0xc000 + addi r31,0,0 + lis r31,0xc000 start3: - lis r0,0x0123 - ori r0,r0,0x4567 - stw r0,0(r31) - sync + lis r0,0x0123 + ori r0,r0,0x4567 + stw r0,0(r31) + sync /* * Read one value back - * ptr = (volatile unsigned long *)addr; - * val = *ptr; + * ptr = (volatile unsigned long *)addr; + * val = *ptr; */ - lwz r0,0(r31) - sync + lwz r0,0(r31) + sync /* * One pci config write - * ibmPciConfigWrite(0x2e, 2, 0x1234); + * ibmPciConfigWrite(0x2e, 2, 0x1234); */ /* subsystem id (PCIC0_SBSYSVID)*/ + li r4,0x002C + oris r4,r4,0x8000 + lis r3,0xEEC0 + stwbrx r4,0,r3 + sync + li r5,0x1234 + ori r3,r3,0x4 + stwbrx r5,0,r3 + sync - li r4,0x002C - oris r4,r4,0x8000 - lis r3,0xEEC0 - stwbrx r4,0,r3 - sync - - li r5,0x1234 - ori r3,r3,0x4 - stwbrx r5,0,r3 - sync - - b start3 + b start3 blr /* never reached !!!! */ diff --git a/board/esd/pmc405/strataflash.c b/board/esd/pmc405/strataflash.c index 6578ed9d5..ad7a71dc4 100644 --- a/board/esd/pmc405/strataflash.c +++ b/board/esd/pmc405/strataflash.c @@ -24,7 +24,7 @@ #include #include -#undef DEBUG_FLASH +#undef DEBUG_FLASH /* * This file implements a Common Flash Interface (CFI) driver for ppcboot. * The width of the port and the width of the chips are determined at initialization. @@ -85,12 +85,8 @@ #define FLASH_OFFSET_USER_PROTECTION 0x85 #define FLASH_OFFSET_INTEL_PROTECTION 0x81 - #define FLASH_MAN_CFI 0x01000000 - - - typedef union { unsigned char c; unsigned short w; @@ -107,13 +103,10 @@ typedef union { flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - /*----------------------------------------------------------------------- * Functions */ - - static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c); static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf); static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd); @@ -249,7 +242,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS); flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE); flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM); - + if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) { rcode = 1; } else @@ -277,7 +270,7 @@ void flash_print_info (flash_info_t *info) info->size >> 20, info->sector_count); printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n", info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size); - + printf (" Sector Start Addresses:"); for (i=0; isector_count; ++i) { #ifdef CFG_FLASH_EMPTY_INFO @@ -286,28 +279,28 @@ void flash_print_info (flash_info_t *info) int erased; volatile unsigned long *flash; - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count-1)) - size = info->start[i+1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k=0; ksector_count-1)) + size = info->start[i+1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + erased = 1; + flash = (volatile unsigned long *)info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k=0; kstart[i], erased ? " E" : " ", @@ -414,7 +407,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot) else flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR); - if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout, + if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout, prot?"protect":"unprotect")) == 0) { info->protect[sector] = prot; @@ -464,7 +457,7 @@ static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout printf("Command Sequence Error.\n"); } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){ printf("Block Erase Error.\n"); - retcode = ERR_NOT_ERASED; + retcode = ERR_NOT_ERASED; } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) { printf("Locking Error\n"); } @@ -733,7 +726,7 @@ static int find_sector(flash_info_t *info, ulong addr) { int sector; for(sector = info->sector_count - 1; sector >= 0; sector--) { - if(addr >= info->start[sector]) + if(addr >= info->start[sector]) break; } return sector; @@ -741,7 +734,7 @@ static int find_sector(flash_info_t *info, ulong addr) static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len) { - + int sector; int cnt; int retcode; @@ -789,8 +782,8 @@ static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, in flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM); retcode = flash_full_status_check(info, sector, info->buffer_write_tout, "buffer write"); - } + } flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); return retcode; -} +} #endif /* CFG_USE_FLASH_BUFFER_WRITE */ diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c index c918b6a50..16724005b 100644 --- a/board/esd/tasreg/tasreg.c +++ b/board/esd/tasreg/tasreg.c @@ -60,7 +60,7 @@ const unsigned char fpgadata[] = int checkboard (void) { ulong val; - uchar val8; + uchar val8; puts ("Board: "); puts("esd TASREG"); diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c index c0b36762b..5967e90e1 100644 --- a/board/g2000/g2000.c +++ b/board/g2000/g2000.c @@ -25,7 +25,6 @@ #include #include - #define MEM_MCOPT1_INIT_VAL 0x00800000 #define MEM_RTR_INIT_VAL 0x04070000 #define MEM_PMIT_INIT_VAL 0x07c00000 @@ -34,11 +33,8 @@ #define MEM_SDTR1_INIT_VAL 0x00854005 #define SDRAM0_CFG_ENABLE 0x80000000 - - #define CFG_SDRAM_SIZE 0x04000000 /* 64 MB */ - int board_early_init_f (void) { #if 0 /* test-only */ @@ -119,19 +115,19 @@ int checkboard (void) long int init_sdram_static_settings(void) { #define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) - /* disable memcontroller so updates work */ - mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL ); - mtsdram0( mem_rtr , MEM_RTR_INIT_VAL ); - mtsdram0( mem_pmit , MEM_PMIT_INIT_VAL ); - mtsdram0( mem_mb0cf , MEM_MB0CF_INIT_VAL ); - mtsdram0( mem_mb1cf , MEM_MB1CF_INIT_VAL ); - mtsdram0( mem_sdtr1 , MEM_SDTR1_INIT_VAL ); + /* disable memcontroller so updates work */ + mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL ); + mtsdram0( mem_rtr , MEM_RTR_INIT_VAL ); + mtsdram0( mem_pmit , MEM_PMIT_INIT_VAL ); + mtsdram0( mem_mb0cf , MEM_MB0CF_INIT_VAL ); + mtsdram0( mem_mb1cf , MEM_MB1CF_INIT_VAL ); + mtsdram0( mem_sdtr1 , MEM_SDTR1_INIT_VAL ); - /* SDRAM have a power on delay, 500 micro should do */ - udelay(500); - mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL|SDRAM0_CFG_ENABLE ); + /* SDRAM have a power on delay, 500 micro should do */ + udelay(500); + mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL|SDRAM0_CFG_ENABLE ); - return (CFG_SDRAM_SIZE); /* CFG_SDRAM_SIZE is in G2000.h */ + return (CFG_SDRAM_SIZE); /* CFG_SDRAM_SIZE is in G2000.h */ } @@ -141,9 +137,9 @@ long int initdram (int board_type) /* flzt, we can still turn this on in the future */ /* #ifdef CONFIG_SPD_EEPROM - ret = spd_sdram (); + ret = spd_sdram (); #else - ret = init_sdram_static_settings(); + ret = init_sdram_static_settings(); #endif */ diff --git a/board/g2000/strataflash.c b/board/g2000/strataflash.c index 06fedeccd..8446e0210 100644 --- a/board/g2000/strataflash.c +++ b/board/g2000/strataflash.c @@ -85,12 +85,8 @@ #define FLASH_OFFSET_USER_PROTECTION 0x85 #define FLASH_OFFSET_INTEL_PROTECTION 0x81 - #define FLASH_MAN_CFI 0x01000000 - - - typedef union { unsigned char c; unsigned short w; @@ -107,13 +103,10 @@ typedef union { flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - /*----------------------------------------------------------------------- * Functions */ - - static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c); static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf); static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd); @@ -286,28 +279,28 @@ void flash_print_info (flash_info_t *info) int erased; volatile unsigned long *flash; - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count-1)) - size = info->start[i+1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k=0; ksector_count-1)) + size = info->start[i+1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + erased = 1; + flash = (volatile unsigned long *)info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k=0; kstart[i], erased ? " E" : " ", @@ -464,7 +457,7 @@ static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout printf("Command Sequence Error.\n"); } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){ printf("Block Erase Error.\n"); - retcode = ERR_NOT_ERASED; + retcode = ERR_NOT_ERASED; } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) { printf("Locking Error\n"); } diff --git a/board/inka4x0/flash.c b/board/inka4x0/flash.c index a60f4f129..b13865530 100644 --- a/board/inka4x0/flash.c +++ b/board/inka4x0/flash.c @@ -142,9 +142,9 @@ void flash_print_info (flash_info_t *info) } switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM116DB: - printf ("AM29LV116DB (16Mbit, bottom boot sect)\n"); - break; + case FLASH_AM116DB: + printf ("AM29LV116DB (16Mbit, bottom boot sect)\n"); + break; case FLASH_AMLV128U: printf ("AM29LV128ML (128Mbit, uniform sector size)\n"); break; @@ -220,21 +220,21 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) case (uchar)AMD_ID_LV116DB: debug ("Chip: AM29LV116DB\n"); - info->flash_id += FLASH_AM116DB; - info->sector_count = 35; - info->size = 0x00200000; - /* - * The first 4 sectors are 16 kB, 8 kB, 8 kB and 32 kB, all - * the other ones are 64 kB - */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for( i = 4; i < info->sector_count; i++ ) - info->start[i] = - base + (i * (64 << 10)) - 0x00030000; - break; /* => 2 MB */ + info->flash_id += FLASH_AM116DB; + info->sector_count = 35; + info->size = 0x00200000; + /* + * The first 4 sectors are 16 kB, 8 kB, 8 kB and 32 kB, all + * the other ones are 64 kB + */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for( i = 4; i < info->sector_count; i++ ) + info->start[i] = + base + (i * (64 << 10)) - 0x00030000; + break; /* => 2 MB */ case (FPW)AMD_ID_LV160B: debug ("Chip: AM29LV160MB\n"); @@ -377,8 +377,8 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) for (i = 0; i < cnt; i++) if ((rc = write_word_amd(info, (FPW *)(addr+i), src[i])) != 0) { - return (rc); - } + return (rc); + } return rc; } diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c index 3dec6849b..1d7707ab4 100644 --- a/board/inka4x0/inka4x0.c +++ b/board/inka4x0/inka4x0.c @@ -176,4 +176,3 @@ void flash_preinit(void) */ *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ } - diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index 40f5a7d1d..5ac6cb5ce 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -419,7 +419,7 @@ int last_stage_init (void) /* save origianl SRAM content */ save = *(volatile u16 *)CFG_CS2_START; restore = 1; - + /* write test pattern to SRAM */ *(volatile u16 *)CFG_CS2_START = 0xA5A5; __asm__ volatile ("sync"); @@ -430,7 +430,7 @@ int last_stage_init (void) tmp = *(volatile u16 *)CFG_FLASH_BASE; if (tmp == 0xA5A5) puts ("!! possible error in SRAM detection\n"); - + if (*(volatile u16 *)CFG_CS2_START != 0xA5A5) { /* no SRAM at all, disable cs */ *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 18); @@ -445,31 +445,31 @@ int last_stage_init (void) __asm__ volatile ("sync"); if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0x1111) { /* SRAM size = 512 kByte */ - *(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CFG_CS2_START, + *(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CFG_CS2_START, 0x80000); __asm__ volatile ("sync"); puts ("SRAM: 512 kB\n"); } else - puts ("!! possible error in SRAM detection\n"); + puts ("!! possible error in SRAM detection\n"); } else { - puts ("SRAM: 1 MB\n"); + puts ("SRAM: 1 MB\n"); } /* restore origianl SRAM content */ if (restore) { *(volatile u16 *)CFG_CS2_START = save; __asm__ volatile ("sync"); } - - /* + + /* * Check for Grafic Controller */ /* save origianl FB content */ save = *(volatile u16 *)CFG_CS1_START; restore = 1; - + /* write test pattern to FB memory */ *(volatile u16 *)CFG_CS1_START = 0xA5A5; __asm__ volatile ("sync"); @@ -480,7 +480,7 @@ int last_stage_init (void) tmp = *(volatile u16 *)CFG_FLASH_BASE; if (tmp == 0xA5A5) puts ("!! possible error in grafic controller detection\n"); - + if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) { /* no grafic controller at all, disable cs */ *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 17); @@ -490,14 +490,14 @@ int last_stage_init (void) __asm__ volatile ("sync"); } else { - puts ("VGA: SMI501 (Voyager) with 8 MB\n"); + puts ("VGA: SMI501 (Voyager) with 8 MB\n"); } /* restore origianl FB content */ if (restore) { *(volatile u16 *)CFG_CS1_START = save; __asm__ volatile ("sync"); } - + return 0; } #endif /* CONFIG_CS_AUTOCONF */ diff --git a/cpu/at91rm9200/cpu.c b/cpu/at91rm9200/cpu.c index 71463c957..90a4f9cd0 100644 --- a/cpu/at91rm9200/cpu.c +++ b/cpu/at91rm9200/cpu.c @@ -134,7 +134,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /*shutdown the console to avoid strange chars during reset */ us->US_CR = (AT91C_US_RSTRX | AT91C_US_RSTTX); -#ifdef CONFIG_AT91RM9200DK +#ifdef CONFIG_AT91RM9200DK /* Clear PA19 to trigger the hard reset */ pio->PIO_CODR = 0x00080000; pio->PIO_OER = 0x00080000; diff --git a/drivers/ps2ser.c b/drivers/ps2ser.c index 56925a8e0..e2a38dc3d 100644 --- a/drivers/ps2ser.c +++ b/drivers/ps2ser.c @@ -163,7 +163,7 @@ void ps2ser_putc(int chr) #ifdef CONFIG_MPC5xxx while (!(psc->psc_status & PSC_SR_TXRDY)); - + psc->psc_buffer_8 = chr; #else while (!(ps2ser_in(UART_LSR) & UART_LSR_THRE)); @@ -259,7 +259,7 @@ static void ps2ser_interrupt(void *dev_id) printf ("ps2ser.c: buffer overflow\n"); } #ifdef CONFIG_MPC5xxx - } while (status & PSC_SR_RXRDY); + } while (status & PSC_SR_RXRDY); #else } while (status & UART_IIR_RDI); #endif diff --git a/fs/ext2/dev.c b/fs/ext2/dev.c index 117a44984..35a576daa 100644 --- a/fs/ext2/dev.c +++ b/fs/ext2/dev.c @@ -34,109 +34,96 @@ static block_dev_desc_t *ext2fs_block_dev_desc; static disk_partition_t part_info; #undef DEBUG -int ext2fs_set_blk_dev - ( - block_dev_desc_t *rbdd, - int part - ) - { - ext2fs_block_dev_desc = rbdd; +int ext2fs_set_blk_dev (block_dev_desc_t * rbdd, int part) +{ + ext2fs_block_dev_desc = rbdd; - if (part == 0) - { - /* disk doesn't use partition table */ - part_info.start = 0; - part_info.size = rbdd->lba; - part_info.blksz = rbdd->blksz; - } - else - { - if (get_partition_info (ext2fs_block_dev_desc, part, &part_info)) - { - return 0; - } + if (part == 0) { + /* disk doesn't use partition table */ + part_info.start = 0; + part_info.size = rbdd->lba; + part_info.blksz = rbdd->blksz; + } else { + if (get_partition_info + (ext2fs_block_dev_desc, part, &part_info)) { + return 0; + } } - return (part_info.size); - } + return (part_info.size); +} -int ext2fs_devread - ( - int sector, - int byte_offset, - int byte_len, - char *buf - ) - { - char sec_buf[SECTOR_SIZE]; - unsigned block_len; +int ext2fs_devread (int sector, int byte_offset, int byte_len, char *buf) { + char sec_buf[SECTOR_SIZE]; + unsigned block_len; + /* * Check partition boundaries */ - if ((sector < 0) || ((sector + ((byte_offset + byte_len - 1) >> SECTOR_BITS)) >= part_info.size)) - { -/* errnum = ERR_OUTSIDE_PART; */ - printf (" ** ext2fs_devread() read outside partition sector %d\n", sector); - return(0); + if ((sector < 0) + || ((sector + ((byte_offset + byte_len - 1) >> SECTOR_BITS)) >= + part_info.size)) { + /* errnum = ERR_OUTSIDE_PART; */ + printf (" ** ext2fs_devread() read outside partition sector %d\n", sector); + return (0); } /* * Get the read to the beginning of a partition. */ - sector += byte_offset >> SECTOR_BITS; - byte_offset &= SECTOR_SIZE - 1; + sector += byte_offset >> SECTOR_BITS; + byte_offset &= SECTOR_SIZE - 1; #if defined(DEBUG) - printf (" <%d, %d, %d>\n", sector, byte_offset, byte_len); + printf (" <%d, %d, %d>\n", sector, byte_offset, byte_len); #endif - if (ext2fs_block_dev_desc == NULL) - { - printf("** Invalid Block Device Descriptor (NULL)\n"); - return(0); + if (ext2fs_block_dev_desc == NULL) { + printf ("** Invalid Block Device Descriptor (NULL)\n"); + return (0); } - if (byte_offset != 0) - { -/* read first part which isn't aligned with start of sector */ - if (ext2fs_block_dev_desc->block_read(ext2fs_block_dev_desc->dev, part_info.start+sector, 1, (unsigned long *)sec_buf) != 1) - { - printf (" ** ext2fs_devread() read error **\n"); - return(0); - } - memcpy(buf, sec_buf+byte_offset, min(SECTOR_SIZE-byte_offset, byte_len)); - buf+=min(SECTOR_SIZE-byte_offset, byte_len); - byte_len-=min(SECTOR_SIZE-byte_offset, byte_len); - sector++; + if (byte_offset != 0) { + /* read first part which isn't aligned with start of sector */ + if (ext2fs_block_dev_desc-> + block_read (ext2fs_block_dev_desc->dev, + part_info.start + sector, 1, + (unsigned long *) sec_buf) != 1) { + printf (" ** ext2fs_devread() read error **\n"); + return (0); + } + memcpy (buf, sec_buf + byte_offset, + min (SECTOR_SIZE - byte_offset, byte_len)); + buf += min (SECTOR_SIZE - byte_offset, byte_len); + byte_len -= min (SECTOR_SIZE - byte_offset, byte_len); + sector++; } -/* read sector aligned part */ - block_len = byte_len & ~(SECTOR_SIZE-1); - if (ext2fs_block_dev_desc->block_read(ext2fs_block_dev_desc->dev, - part_info.start+sector, - block_len/SECTOR_SIZE, - (unsigned long *)buf) != block_len/SECTOR_SIZE) - { - printf (" ** ext2fs_devread() read error - block\n"); - return(0); + /* read sector aligned part */ + block_len = byte_len & ~(SECTOR_SIZE - 1); + if (ext2fs_block_dev_desc->block_read (ext2fs_block_dev_desc->dev, + part_info.start + sector, + block_len / SECTOR_SIZE, + (unsigned long *) buf) != + block_len / SECTOR_SIZE) { + printf (" ** ext2fs_devread() read error - block\n"); + return (0); } - buf+=block_len; - byte_len-=block_len; - sector+= block_len/SECTOR_SIZE; + buf += block_len; + byte_len -= block_len; + sector += block_len / SECTOR_SIZE; - if (byte_len != 0) - { -/* read rest of data which are not in whole sector */ - if (ext2fs_block_dev_desc->block_read(ext2fs_block_dev_desc->dev, - part_info.start+sector, - 1, - (unsigned long *)sec_buf) != 1) - { - printf (" ** ext2fs_devread() read error - last part\n"); - return(0); - } - memcpy(buf, sec_buf, byte_len); + if (byte_len != 0) { + /* read rest of data which are not in whole sector */ + if (ext2fs_block_dev_desc-> + block_read (ext2fs_block_dev_desc->dev, + part_info.start + sector, 1, + (unsigned long *) sec_buf) != 1) { + printf (" ** ext2fs_devread() read error - last part\n"); + return (0); + } + memcpy (buf, sec_buf, byte_len); } - return(1); - } + return (1); +} #endif /* CFG_CMD_EXT2FS */ diff --git a/fs/ext2/ext2fs.c b/fs/ext2/ext2fs.c index bae72a35a..a2d698abc 100644 --- a/fs/ext2/ext2fs.c +++ b/fs/ext2/ext2fs.c @@ -30,7 +30,8 @@ #include #include -extern int ext2fs_devread (int sector, int byte_offset, int byte_len, char *buf); +extern int ext2fs_devread (int sector, int byte_offset, int byte_len, + char *buf); /* Magic value used to identify an ext2 filesystem. */ #define EXT2_MAGIC 0xEF53 @@ -66,8 +67,7 @@ extern int ext2fs_devread (int sector, int byte_offset, int byte_len, char *buf) #define EXT2_BLOCK_SIZE(data) (1 << LOG2_BLOCK_SIZE(data)) /* The ext2 superblock. */ -struct ext2_sblock -{ +struct ext2_sblock { uint32_t total_inodes; uint32_t total_blocks; uint32_t reserved_blocks; @@ -106,8 +106,7 @@ struct ext2_sblock }; /* The ext2 blockgroup. */ -struct ext2_block_group -{ +struct ext2_block_group { uint32_t block_id; uint32_t inode_id; uint32_t inode_table_id; @@ -118,8 +117,7 @@ struct ext2_block_group }; /* The ext2 inode. */ -struct ext2_inode -{ +struct ext2_inode { uint16_t mode; uint16_t uid; uint32_t size; @@ -129,20 +127,18 @@ struct ext2_inode uint32_t dtime; uint16_t gid; uint16_t nlinks; - uint32_t blockcnt; /* Blocks of 512 bytes!! */ + uint32_t blockcnt; /* Blocks of 512 bytes!! */ uint32_t flags; uint32_t osd1; - union - { - struct datablocks - { + union { + struct datablocks { uint32_t dir_blocks[INDIRECT_BLOCKS]; uint32_t indir_block; uint32_t double_indir_block; uint32_t tripple_indir_block; } blocks; char symlink[60]; - } b; + } b; uint32_t version; uint32_t acl; uint32_t dir_acl; @@ -151,25 +147,22 @@ struct ext2_inode }; /* The header of an ext2 directory entry. */ -struct ext2_dirent -{ +struct ext2_dirent { uint32_t inode; uint16_t direntlen; - uint8_t namelen; - uint8_t filetype; + uint8_t namelen; + uint8_t filetype; }; -struct ext2fs_node -{ +struct ext2fs_node { struct ext2_data *data; struct ext2_inode inode; - int ino; - int inode_read; + int ino; + int inode_read; }; /* Information about a "mounted" ext2 filesystem. */ -struct ext2_data -{ +struct ext2_data { struct ext2_sblock sblock; struct ext2_inode *inode; struct ext2fs_node diropen; @@ -178,827 +171,708 @@ struct ext2_data typedef struct ext2fs_node *ext2fs_node_t; -struct ext2_data *ext2fs_root = NULL; -ext2fs_node_t ext2fs_file = NULL; -int symlinknest = 0; -uint32_t *indir1_block = NULL; -int indir1_size = 0; -int indir1_blkno = -1; -uint32_t *indir2_block = NULL; -int indir2_size = 0; -int indir2_blkno = -1; +struct ext2_data *ext2fs_root = NULL; +ext2fs_node_t ext2fs_file = NULL; +int symlinknest = 0; +uint32_t *indir1_block = NULL; +int indir1_size = 0; +int indir1_blkno = -1; +uint32_t *indir2_block = NULL; +int indir2_size = 0; +int indir2_blkno = -1; static int ext2fs_blockgroup -( - struct ext2_data *data, - int group, - struct ext2_block_group *blkgrp - ) -{ + (struct ext2_data *data, int group, struct ext2_block_group *blkgrp) { #ifdef DEBUG - printf("ext2fs read blockgroup\n"); + printf ("ext2fs read blockgroup\n"); #endif - return(ext2fs_devread (((__le32_to_cpu (data->sblock.first_data_block) + 1) << LOG2_EXT2_BLOCK_SIZE (data)), - group * sizeof (struct ext2_block_group), - sizeof (struct ext2_block_group), - (char *) blkgrp)); + return (ext2fs_devread + (((__le32_to_cpu (data->sblock.first_data_block) + + 1) << LOG2_EXT2_BLOCK_SIZE (data)), + group * sizeof (struct ext2_block_group), + sizeof (struct ext2_block_group), (char *) blkgrp)); } static int ext2fs_read_inode -( - struct ext2_data *data, - int ino, - struct ext2_inode *inode - ) -{ - struct ext2_block_group blkgrp; - struct ext2_sblock *sblock = &data->sblock; - int inodes_per_block; - int status; + (struct ext2_data *data, int ino, struct ext2_inode *inode) { + struct ext2_block_group blkgrp; + struct ext2_sblock *sblock = &data->sblock; + int inodes_per_block; + int status; - unsigned int blkno; - unsigned int blkoff; + unsigned int blkno; + unsigned int blkoff; /* It is easier to calculate if the first inode is 0. */ ino--; #ifdef DEBUG - printf("ext2fs read inode %d\n", ino); + printf ("ext2fs read inode %d\n", ino); #endif - status = ext2fs_blockgroup (data, ino / __le32_to_cpu(sblock->inodes_per_group), &blkgrp); - if (status == 0) - { - return(0); + status = ext2fs_blockgroup (data, + ino / + __le32_to_cpu (sblock->inodes_per_group), + &blkgrp); + if (status == 0) { + return (0); } inodes_per_block = EXT2_BLOCK_SIZE (data) / 128; - blkno = (ino % __le32_to_cpu (sblock->inodes_per_group)) / inodes_per_block; - blkoff = (ino % __le32_to_cpu (sblock->inodes_per_group)) % inodes_per_block; + blkno = (ino % __le32_to_cpu (sblock->inodes_per_group)) / + inodes_per_block; + blkoff = (ino % __le32_to_cpu (sblock->inodes_per_group)) % + inodes_per_block; #ifdef DEBUG - printf("ext2fs read inode blkno %d blkoff %d\n", blkno, blkoff); + printf ("ext2fs read inode blkno %d blkoff %d\n", blkno, blkoff); #endif /* Read the inode. */ - status = ext2fs_devread(((__le32_to_cpu (blkgrp.inode_table_id) + blkno) << LOG2_EXT2_BLOCK_SIZE (data)), - sizeof (struct ext2_inode) * blkoff, - sizeof (struct ext2_inode), - (char *) inode); - if (status == 0) - { - return(0); + status = ext2fs_devread (((__le32_to_cpu (blkgrp.inode_table_id) + + blkno) << LOG2_EXT2_BLOCK_SIZE (data)), + sizeof (struct ext2_inode) * blkoff, + sizeof (struct ext2_inode), (char *) inode); + if (status == 0) { + return (0); } - return(1); + return (1); } -void ext2fs_free_node -( - ext2fs_node_t node, - ext2fs_node_t currroot - ) -{ - if ((node != &ext2fs_root->diropen) && (node != currroot)) - { +void ext2fs_free_node (ext2fs_node_t node, ext2fs_node_t currroot) { + if ((node != &ext2fs_root->diropen) && (node != currroot)) { free (node); } } -static int ext2fs_read_block -( - ext2fs_node_t node, - int fileblock - ) -{ - struct ext2_data *data = node->data; - struct ext2_inode *inode = &node->inode; - int blknr; - int blksz = EXT2_BLOCK_SIZE (data); - int log2_blksz = LOG2_EXT2_BLOCK_SIZE (data); - int status; +static int ext2fs_read_block (ext2fs_node_t node, int fileblock) { + struct ext2_data *data = node->data; + struct ext2_inode *inode = &node->inode; + int blknr; + int blksz = EXT2_BLOCK_SIZE (data); + int log2_blksz = LOG2_EXT2_BLOCK_SIZE (data); + int status; /* Direct blocks. */ - if (fileblock < INDIRECT_BLOCKS) - { + if (fileblock < INDIRECT_BLOCKS) { blknr = __le32_to_cpu (inode->b.blocks.dir_blocks[fileblock]); - } + } /* Indirect. */ - else if (fileblock < (INDIRECT_BLOCKS + (blksz/4))) - { - if (indir1_block == NULL) - { - indir1_block = (uint32_t *) malloc(blksz); - if (indir1_block == NULL) - { - printf("** ext2fs read block (indir 1) malloc failed. **\n"); - return(-1); + else if (fileblock < (INDIRECT_BLOCKS + (blksz / 4))) { + if (indir1_block == NULL) { + indir1_block = (uint32_t *) malloc (blksz); + if (indir1_block == NULL) { + printf ("** ext2fs read block (indir 1) malloc failed. **\n"); + return (-1); } - indir1_size = blksz; + indir1_size = blksz; indir1_blkno = -1; } - if (blksz != indir1_size) - { - free(indir1_block); + if (blksz != indir1_size) { + free (indir1_block); indir1_block = NULL; - indir1_size = 0; + indir1_size = 0; indir1_blkno = -1; - indir1_block = (uint32_t *) malloc(blksz); - if (indir1_block == NULL) - { - printf("** ext2fs read block (indir 1) malloc failed. **\n"); - return(-1); + indir1_block = (uint32_t *) malloc (blksz); + if (indir1_block == NULL) { + printf ("** ext2fs read block (indir 1) malloc failed. **\n"); + return (-1); } - indir1_size = blksz; + indir1_size = blksz; } - if ((__le32_to_cpu(inode->b.blocks.indir_block) << log2_blksz) != indir1_blkno) - { - status = ext2fs_devread (__le32_to_cpu(inode->b.blocks.indir_block) << log2_blksz, 0, blksz, (char *) indir1_block); - if (status == 0) - { - printf("** ext2fs read block (indir 1) failed. **\n"); - return(0); + if ((__le32_to_cpu (inode->b.blocks.indir_block) << + log2_blksz) != indir1_blkno) { + status = ext2fs_devread (__le32_to_cpu(inode->b.blocks.indir_block) << log2_blksz, + 0, blksz, + (char *) indir1_block); + if (status == 0) { + printf ("** ext2fs read block (indir 1) failed. **\n"); + return (0); } - indir1_blkno = __le32_to_cpu(inode->b.blocks.indir_block) << log2_blksz; + indir1_blkno = + __le32_to_cpu (inode->b.blocks. + indir_block) << log2_blksz; } - blknr = __le32_to_cpu(indir1_block[fileblock - INDIRECT_BLOCKS]); + blknr = __le32_to_cpu (indir1_block + [fileblock - INDIRECT_BLOCKS]); } /* Double indirect. */ - else if (fileblock < (INDIRECT_BLOCKS + (blksz / 4 * (blksz / 4 + 1)))) - { + else if (fileblock < + (INDIRECT_BLOCKS + (blksz / 4 * (blksz / 4 + 1)))) { unsigned int perblock = blksz / 4; unsigned int rblock = fileblock - (INDIRECT_BLOCKS + blksz / 4); - if (indir1_block == NULL) - { - indir1_block = (uint32_t *) malloc(blksz); - if (indir1_block == NULL) - { - printf("** ext2fs read block (indir 2 1) malloc failed. **\n"); - return(-1); + if (indir1_block == NULL) { + indir1_block = (uint32_t *) malloc (blksz); + if (indir1_block == NULL) { + printf ("** ext2fs read block (indir 2 1) malloc failed. **\n"); + return (-1); } - indir1_size = blksz; + indir1_size = blksz; indir1_blkno = -1; } - if (blksz != indir1_size) - { - free(indir1_block); + if (blksz != indir1_size) { + free (indir1_block); indir1_block = NULL; - indir1_size = 0; + indir1_size = 0; indir1_blkno = -1; - indir1_block = (uint32_t *) malloc(blksz); - if (indir1_block == NULL) - { - printf("** ext2fs read block (indir 2 1) malloc failed. **\n"); - return(-1); + indir1_block = (uint32_t *) malloc (blksz); + if (indir1_block == NULL) { + printf ("** ext2fs read block (indir 2 1) malloc failed. **\n"); + return (-1); } - indir1_size = blksz; + indir1_size = blksz; } - if ((__le32_to_cpu(inode->b.blocks.double_indir_block) << log2_blksz) != indir1_blkno) - { - status = ext2fs_devread (__le32_to_cpu(inode->b.blocks.double_indir_block) << log2_blksz, 0, blksz, (char *) indir1_block); - if (status == 0) - { - printf("** ext2fs read block (indir 2 1) failed. **\n"); - return(-1); + if ((__le32_to_cpu (inode->b.blocks.double_indir_block) << + log2_blksz) != indir1_blkno) { + status = ext2fs_devread (__le32_to_cpu(inode->b.blocks.double_indir_block) << log2_blksz, + 0, blksz, + (char *) indir1_block); + if (status == 0) { + printf ("** ext2fs read block (indir 2 1) failed. **\n"); + return (-1); } - indir1_blkno = __le32_to_cpu(inode->b.blocks.double_indir_block) << log2_blksz; + indir1_blkno = + __le32_to_cpu (inode->b.blocks.double_indir_block) << log2_blksz; } - if (indir2_block == NULL) - { - indir2_block = (uint32_t *) malloc(blksz); - if (indir2_block == NULL) - { - printf("** ext2fs read block (indir 2 2) malloc failed. **\n"); - return(-1); + if (indir2_block == NULL) { + indir2_block = (uint32_t *) malloc (blksz); + if (indir2_block == NULL) { + printf ("** ext2fs read block (indir 2 2) malloc failed. **\n"); + return (-1); } - indir2_size = blksz; + indir2_size = blksz; indir2_blkno = -1; } - if (blksz != indir2_size) - { - free(indir2_block); + if (blksz != indir2_size) { + free (indir2_block); indir2_block = NULL; - indir2_size = 0; + indir2_size = 0; indir2_blkno = -1; - indir2_block = (uint32_t *) malloc(blksz); - if (indir2_block == NULL) - { - printf("** ext2fs read block (indir 2 2) malloc failed. **\n"); - return(-1); + indir2_block = (uint32_t *) malloc (blksz); + if (indir2_block == NULL) { + printf ("** ext2fs read block (indir 2 2) malloc failed. **\n"); + return (-1); } - indir2_size = blksz; + indir2_size = blksz; } - if ((__le32_to_cpu(indir1_block[rblock / perblock]) << log2_blksz) != indir1_blkno) - { - status = ext2fs_devread(__le32_to_cpu(indir1_block[rblock / perblock]) << log2_blksz, 0, blksz, (char *) indir2_block); - if (status == 0) - { - printf("** ext2fs read block (indir 2 2) failed. **\n"); - return(-1); + if ((__le32_to_cpu (indir1_block[rblock / perblock]) << + log2_blksz) != indir1_blkno) { + status = ext2fs_devread (__le32_to_cpu(indir1_block[rblock / perblock]) << log2_blksz, + 0, blksz, + (char *) indir2_block); + if (status == 0) { + printf ("** ext2fs read block (indir 2 2) failed. **\n"); + return (-1); } - indir2_blkno = __le32_to_cpu(indir1_block[rblock / perblock]) << log2_blksz; + indir2_blkno = + __le32_to_cpu (indir1_block[rblock / perblock]) << log2_blksz; } - blknr = __le32_to_cpu(indir2_block[rblock % perblock]); + blknr = __le32_to_cpu (indir2_block[rblock % perblock]); } /* Tripple indirect. */ - else - { - printf("** ext2fs doesn't support tripple indirect blocks. **\n"); - return(-1); - } + else { + printf ("** ext2fs doesn't support tripple indirect blocks. **\n"); + return (-1); + } #ifdef DEBUG - printf("ext2fs_read_block %08x\n", blknr); + printf ("ext2fs_read_block %08x\n", blknr); #endif - return(blknr); + return (blknr); } int ext2fs_read_file -( - ext2fs_node_t node, - int pos, - unsigned int len, - char *buf - ) -{ - int i; - int blockcnt; - int log2blocksize = LOG2_EXT2_BLOCK_SIZE (node->data); - int blocksize = 1 << (log2blocksize + DISK_SECTOR_BITS); - unsigned int filesize = node->inode.size; + (ext2fs_node_t node, int pos, unsigned int len, char *buf) { + int i; + int blockcnt; + int log2blocksize = LOG2_EXT2_BLOCK_SIZE (node->data); + int blocksize = 1 << (log2blocksize + DISK_SECTOR_BITS); + unsigned int filesize = node->inode.size; /* Adjust len so it we can't read past the end of the file. */ - if (len > filesize) - { + if (len > filesize) { len = filesize; } - blockcnt = ((len + pos) + blocksize - 1) / blocksize; + blockcnt = ((len + pos) + blocksize - 1) / blocksize; - for (i = pos / blocksize; i < blockcnt; i++) - { + for (i = pos / blocksize; i < blockcnt; i++) { int blknr; int blockoff = pos % blocksize; int blockend = blocksize; int skipfirst = 0; - blknr = ext2fs_read_block(node, i); - if (blknr < 0) - { - return(-1); + blknr = ext2fs_read_block (node, i); + if (blknr < 0) { + return (-1); } blknr = blknr << log2blocksize; /* Last block. */ - if (i == blockcnt - 1) - { + if (i == blockcnt - 1) { blockend = (len + pos) % blocksize; /* The last portion is exactly blocksize. */ - if (!blockend) - { + if (!blockend) { blockend = blocksize; } } /* First block. */ - if (i == pos / blocksize) - { + if (i == pos / blocksize) { skipfirst = blockoff; blockend -= skipfirst; } /* If the block number is 0 this block is not stored on disk but is zero filled instead. */ - if (blknr) - { + if (blknr) { int status; status = ext2fs_devread (blknr, skipfirst, blockend, buf); - if (status == 0) - { - return(-1); + if (status == 0) { + return (-1); } - } - else - { + } else { memset (buf, blocksize - skipfirst, 0); } buf += blocksize - skipfirst; - } - return(len); + } + return (len); } -static int ext2fs_iterate_dir -( - ext2fs_node_t dir, - char *name, - ext2fs_node_t *fnode, - int *ftype - ) +static int ext2fs_iterate_dir (ext2fs_node_t dir, char *name, ext2fs_node_t * fnode, int *ftype) { unsigned int fpos = 0; - int status; + int status; struct ext2fs_node *diro = (struct ext2fs_node *) dir; + #ifdef DEBUG - if (name != NULL) printf("Iterate dir %s\n", name); + if (name != NULL) + printf ("Iterate dir %s\n", name); #endif /* of DEBUG */ - if (!diro->inode_read) - { - status = ext2fs_read_inode (diro->data, diro->ino, &diro->inode); - if (status == 0) - { - return(0); + if (!diro->inode_read) { + status = ext2fs_read_inode (diro->data, diro->ino, + &diro->inode); + if (status == 0) { + return (0); } } /* Search the file. */ - while (fpos < __le32_to_cpu (diro->inode.size)) - { + while (fpos < __le32_to_cpu (diro->inode.size)) { struct ext2_dirent dirent; - status = ext2fs_read_file (diro, fpos, sizeof (struct ext2_dirent), (char *) &dirent); - if (status < 1) - { - return(0); + status = ext2fs_read_file (diro, fpos, + sizeof (struct ext2_dirent), + (char *) &dirent); + if (status < 1) { + return (0); } - if (dirent.namelen != 0) - { - char filename[dirent.namelen + 1]; - ext2fs_node_t fdiro; - int type = FILETYPE_UNKNOWN; + if (dirent.namelen != 0) { + char filename[dirent.namelen + 1]; + ext2fs_node_t fdiro; + int type = FILETYPE_UNKNOWN; - status = ext2fs_read_file (diro, fpos + sizeof (struct ext2_dirent), dirent.namelen, filename); - if (status < 1) - { - return(0); + status = ext2fs_read_file (diro, + fpos + sizeof (struct ext2_dirent), + dirent.namelen, filename); + if (status < 1) { + return (0); } fdiro = malloc (sizeof (struct ext2fs_node)); - if (!fdiro) - { - return(0); + if (!fdiro) { + return (0); } fdiro->data = diro->data; - fdiro->ino = __le32_to_cpu(dirent.inode); + fdiro->ino = __le32_to_cpu (dirent.inode); filename[dirent.namelen] = '\0'; - if (dirent.filetype != FILETYPE_UNKNOWN) - { + if (dirent.filetype != FILETYPE_UNKNOWN) { fdiro->inode_read = 0; - if (dirent.filetype == FILETYPE_DIRECTORY) - { + if (dirent.filetype == FILETYPE_DIRECTORY) { type = FILETYPE_DIRECTORY; - } - else if (dirent.filetype == FILETYPE_SYMLINK) - { + } else if (dirent.filetype == + FILETYPE_SYMLINK) { type = FILETYPE_SYMLINK; + } else if (dirent.filetype == FILETYPE_REG) { + type = FILETYPE_REG; } - else if (dirent.filetype == FILETYPE_REG) - { - type = FILETYPE_REG; - } - } - else - { + } else { /* The filetype can not be read from the dirent, get it from inode */ - status = ext2fs_read_inode (diro->data, __le32_to_cpu (dirent.inode), &fdiro->inode); - if (status == 0) - { - free(fdiro); - return(0); + status = ext2fs_read_inode (diro->data, + __le32_to_cpu(dirent.inode), + &fdiro->inode); + if (status == 0) { + free (fdiro); + return (0); } fdiro->inode_read = 1; - if ((__le16_to_cpu (fdiro->inode.mode) & FILETYPE_INO_MASK) == FILETYPE_INO_DIRECTORY) - { + if ((__le16_to_cpu (fdiro->inode.mode) & + FILETYPE_INO_MASK) == + FILETYPE_INO_DIRECTORY) { type = FILETYPE_DIRECTORY; - } - else if ((__le16_to_cpu (fdiro->inode.mode) & FILETYPE_INO_MASK) == FILETYPE_INO_SYMLINK) - { + } else if ((__le16_to_cpu (fdiro->inode.mode) + & FILETYPE_INO_MASK) == + FILETYPE_INO_SYMLINK) { type = FILETYPE_SYMLINK; - } - else if ((__le16_to_cpu (fdiro->inode.mode) & FILETYPE_INO_MASK) == FILETYPE_INO_REG) - { + } else if ((__le16_to_cpu (fdiro->inode.mode) + & FILETYPE_INO_MASK) == + FILETYPE_INO_REG) { type = FILETYPE_REG; } } #ifdef DEBUG - printf("iterate >%s<\n", filename); + printf ("iterate >%s<\n", filename); #endif /* of DEBUG */ - if ((name != NULL) && (fnode != NULL) && (ftype != NULL)) - { - if(strcmp(filename, name) == 0) - { + if ((name != NULL) && (fnode != NULL) + && (ftype != NULL)) { + if (strcmp (filename, name) == 0) { *ftype = type; *fnode = fdiro; - return(1); + return (1); } - } - else - { - if (fdiro->inode_read == 0) - { - status = ext2fs_read_inode (diro->data, __le32_to_cpu (dirent.inode), &fdiro->inode); - if (status == 0) - { - free(fdiro); - return(0); + } else { + if (fdiro->inode_read == 0) { + status = ext2fs_read_inode (diro->data, + __le32_to_cpu (dirent.inode), + &fdiro->inode); + if (status == 0) { + free (fdiro); + return (0); } fdiro->inode_read = 1; } - switch(type) - { + switch (type) { case FILETYPE_DIRECTORY: - printf(" "); + printf (" "); break; case FILETYPE_SYMLINK: - printf(" "); + printf (" "); break; case FILETYPE_REG: - printf(" "); + printf (" "); break; default: - printf(" "); + printf (" "); break; } - printf("%10d %s\n", __le32_to_cpu(fdiro->inode.size), filename); + printf ("%10d %s\n", + __le32_to_cpu (fdiro->inode.size), + filename); } - free(fdiro); + free (fdiro); } fpos += __le16_to_cpu (dirent.direntlen); } - return(0); + return (0); } -static char *ext2fs_read_symlink -( - ext2fs_node_t node - ) -{ - char *symlink; +static char *ext2fs_read_symlink (ext2fs_node_t node) { + char *symlink; struct ext2fs_node *diro = node; - int status; + int status; - if (!diro->inode_read) - { - status = ext2fs_read_inode (diro->data, diro->ino, &diro->inode); - if (status == 0) - { - return(0); + if (!diro->inode_read) { + status = ext2fs_read_inode (diro->data, diro->ino, + &diro->inode); + if (status == 0) { + return (0); } } symlink = malloc (__le32_to_cpu (diro->inode.size) + 1); - if (!symlink) - { - return(0); + if (!symlink) { + return (0); } /* If the filesize of the symlink is bigger than 60 the symlink is stored in a separate block, otherwise it is stored in the inode. */ - if (__le32_to_cpu (diro->inode.size) <= 60) - { - strncpy (symlink, diro->inode.b.symlink, __le32_to_cpu (diro->inode.size)); - } - else - { - status = ext2fs_read_file (diro, 0, __le32_to_cpu (diro->inode.size), symlink); - if (status == 0) - { + if (__le32_to_cpu (diro->inode.size) <= 60) { + strncpy (symlink, diro->inode.b.symlink, + __le32_to_cpu (diro->inode.size)); + } else { + status = ext2fs_read_file (diro, 0, + __le32_to_cpu (diro->inode.size), + symlink); + if (status == 0) { free (symlink); - return(0); + return (0); } } symlink[__le32_to_cpu (diro->inode.size)] = '\0'; - return(symlink); + return (symlink); } int ext2fs_find_file1 -( - const char *currpath, - ext2fs_node_t currroot, - ext2fs_node_t *currfound, - int *foundtype - ) -{ - char fpath[strlen (currpath) + 1]; - char *name = fpath; - char *next; - int status; - int type = FILETYPE_DIRECTORY; - ext2fs_node_t currnode = currroot; - ext2fs_node_t oldnode = currroot; + (const char *currpath, + ext2fs_node_t currroot, ext2fs_node_t * currfound, int *foundtype) { + char fpath[strlen (currpath) + 1]; + char *name = fpath; + char *next; + int status; + int type = FILETYPE_DIRECTORY; + ext2fs_node_t currnode = currroot; + ext2fs_node_t oldnode = currroot; strncpy (fpath, currpath, strlen (currpath) + 1); /* Remove all leading slashes. */ - while (*name == '/') - { + while (*name == '/') { name++; - } - if (!*name) - { + } + if (!*name) { *currfound = currnode; - return(1); + return (1); } - for (;;) - { + for (;;) { int found; /* Extract the actual part from the pathname. */ next = strchr (name, '/'); - if (next) - { + if (next) { /* Remove all leading slashes. */ - while (*next == '/') - { + while (*next == '/') { *(next++) = '\0'; } } /* At this point it is expected that the current node is a directory, check if this is true. */ - if (type != FILETYPE_DIRECTORY) - { + if (type != FILETYPE_DIRECTORY) { ext2fs_free_node (currnode, currroot); - return(0); + return (0); } oldnode = currnode; /* Iterate over the directory. */ found = ext2fs_iterate_dir (currnode, name, &currnode, &type); - if (found == 0) - { - return(0); + if (found == 0) { + return (0); } - if (found == -1) - { + if (found == -1) { break; } /* Read in the symlink and follow it. */ - if (type == FILETYPE_SYMLINK) - { + if (type == FILETYPE_SYMLINK) { char *symlink; /* Test if the symlink does not loop. */ - if (++symlinknest == 8) - { + if (++symlinknest == 8) { ext2fs_free_node (currnode, currroot); - ext2fs_free_node (oldnode, currroot); - return(0); + ext2fs_free_node (oldnode, currroot); + return (0); } symlink = ext2fs_read_symlink (currnode); ext2fs_free_node (currnode, currroot); - if (!symlink) - { + if (!symlink) { ext2fs_free_node (oldnode, currroot); - return(0); + return (0); } #ifdef DEBUG - printf("Got symlink >%s<\n",symlink); + printf ("Got symlink >%s<\n", symlink); #endif /* of DEBUG */ /* The symlink is an absolute path, go back to the root inode. */ - if (symlink[0] == '/') - { + if (symlink[0] == '/') { ext2fs_free_node (oldnode, currroot); oldnode = &ext2fs_root->diropen; } /* Lookup the node the symlink points to. */ - status = ext2fs_find_file1 (symlink, oldnode, &currnode, &type); + status = ext2fs_find_file1 (symlink, oldnode, + &currnode, &type); free (symlink); - if (status == 0) - { + if (status == 0) { ext2fs_free_node (oldnode, currroot); - return(0); + return (0); } } ext2fs_free_node (oldnode, currroot); /* Found the node! */ - if (!next || *next == '\0') - { + if (!next || *next == '\0') { *currfound = currnode; *foundtype = type; - return(1); + return (1); } name = next; } - return(-1); + return (-1); } int ext2fs_find_file -( - const char *path, - ext2fs_node_t rootnode, - ext2fs_node_t *foundnode, - int expecttype - ) -{ + (const char *path, + ext2fs_node_t rootnode, ext2fs_node_t * foundnode, int expecttype) { int status; int foundtype = FILETYPE_DIRECTORY; symlinknest = 0; - if (!path || path[0] != '/') - { - return(0); + if (!path || path[0] != '/') { + return (0); } - status = ext2fs_find_file1(path, rootnode, foundnode, &foundtype); - if (status == 0) - { - return(0); + status = ext2fs_find_file1 (path, rootnode, foundnode, &foundtype); + if (status == 0) { + return (0); } /* Check if the node that was found was of the expected type. */ - if ((expecttype == FILETYPE_REG) && (foundtype != expecttype)) - { - return(0); + if ((expecttype == FILETYPE_REG) && (foundtype != expecttype)) { + return (0); + } else if ((expecttype == FILETYPE_DIRECTORY) + && (foundtype != expecttype)) { + return (0); } - else if ((expecttype == FILETYPE_DIRECTORY) && (foundtype != expecttype)) - { - return(0); - } - return(1); + return (1); } -int ext2fs_ls -( - char *dirname - ) -{ +int ext2fs_ls (char *dirname) { ext2fs_node_t dirnode; - int status; + int status; - if (ext2fs_root == NULL) - { - return(0); + if (ext2fs_root == NULL) { + return (0); } - status = ext2fs_find_file(dirname, &ext2fs_root->diropen, &dirnode, FILETYPE_DIRECTORY); - if (status != 1) - { - printf("** Can not find directory. **\n"); - return(1); - } - ext2fs_iterate_dir(dirnode, NULL, NULL, NULL); - ext2fs_free_node(dirnode, &ext2fs_root->diropen); - return(0); + status = ext2fs_find_file (dirname, &ext2fs_root->diropen, &dirnode, + FILETYPE_DIRECTORY); + if (status != 1) { + printf ("** Can not find directory. **\n"); + return (1); + } + ext2fs_iterate_dir (dirnode, NULL, NULL, NULL); + ext2fs_free_node (dirnode, &ext2fs_root->diropen); + return (0); } -int ext2fs_open -( - char *filename - ) -{ - ext2fs_node_t fdiro = NULL; - int status; - int len; +int ext2fs_open (char *filename) { + ext2fs_node_t fdiro = NULL; + int status; + int len; - if (ext2fs_root == NULL) - { - return(0); + if (ext2fs_root == NULL) { + return (0); } ext2fs_file = NULL; - status = ext2fs_find_file (filename, &ext2fs_root->diropen, &fdiro, FILETYPE_REG); - if (status == 0) - { + status = ext2fs_find_file (filename, &ext2fs_root->diropen, &fdiro, + FILETYPE_REG); + if (status == 0) { goto fail; } - if (!fdiro->inode_read) - { - status = ext2fs_read_inode (fdiro->data, fdiro->ino, &fdiro->inode); - if (status == 0) - { + if (!fdiro->inode_read) { + status = ext2fs_read_inode (fdiro->data, fdiro->ino, + &fdiro->inode); + if (status == 0) { goto fail; } } len = __le32_to_cpu (fdiro->inode.size); ext2fs_file = fdiro; - return(len); + return (len); - fail: - ext2fs_free_node(fdiro, &ext2fs_root->diropen); - return(0); + fail: + ext2fs_free_node (fdiro, &ext2fs_root->diropen); + return (0); } -int ext2fs_close -( - void - ) -{ - if ((ext2fs_file != NULL) && (ext2fs_root != NULL)) - { - ext2fs_free_node(ext2fs_file, &ext2fs_root->diropen); +int ext2fs_close (void + ) { + if ((ext2fs_file != NULL) && (ext2fs_root != NULL)) { + ext2fs_free_node (ext2fs_file, &ext2fs_root->diropen); ext2fs_file = NULL; } - if (ext2fs_root != NULL) - { - free(ext2fs_root); - ext2fs_root = NULL; + if (ext2fs_root != NULL) { + free (ext2fs_root); + ext2fs_root = NULL; } - if (indir1_block != NULL) - { - free(indir1_block); - indir1_block = NULL; - indir1_size = 0; - indir1_blkno = -1; + if (indir1_block != NULL) { + free (indir1_block); + indir1_block = NULL; + indir1_size = 0; + indir1_blkno = -1; } - if (indir2_block != NULL) - { - free(indir2_block); - indir2_block = NULL; - indir2_size = 0; - indir2_blkno = -1; + if (indir2_block != NULL) { + free (indir2_block); + indir2_block = NULL; + indir2_size = 0; + indir2_blkno = -1; } - return(0); + return (0); } -int ext2fs_read -( - char *buf, - unsigned len - ) -{ +int ext2fs_read (char *buf, unsigned len) { int status; - if (ext2fs_root == NULL) - { - return(0); + if (ext2fs_root == NULL) { + return (0); } - if (ext2fs_file == NULL) - { - return(0); + if (ext2fs_file == NULL) { + return (0); } - status = ext2fs_read_file(ext2fs_file, 0, len, buf); - return(status); + status = ext2fs_read_file (ext2fs_file, 0, len, buf); + return (status); } -int ext2fs_mount -( - unsigned part_length - ) -{ +int ext2fs_mount (unsigned part_length) { struct ext2_data *data; - int status; + int status; data = malloc (sizeof (struct ext2_data)); - if (!data) - { - return(0); + if (!data) { + return (0); } /* Read the superblock. */ - status = ext2fs_devread (1 * 2, 0, sizeof (struct ext2_sblock), (char *) &data->sblock); - if (status == 0) - { + status = ext2fs_devread (1 * 2, 0, sizeof (struct ext2_sblock), + (char *) &data->sblock); + if (status == 0) { goto fail; } /* Make sure this is an ext2 filesystem. */ - if (__le16_to_cpu (data->sblock.magic) != EXT2_MAGIC) - { + if (__le16_to_cpu (data->sblock.magic) != EXT2_MAGIC) { goto fail; } - data->diropen.data = data; - data->diropen.ino = 2; - data->diropen.inode_read = 1; - data->inode = &data->diropen.inode; + data->diropen.data = data; + data->diropen.ino = 2; + data->diropen.inode_read = 1; + data->inode = &data->diropen.inode; status = ext2fs_read_inode (data, 2, data->inode); - if (status == 0) - { + if (status == 0) { goto fail; } ext2fs_root = data; - return(1); + return (1); - fail: - printf("Failed to mount ext2 filesystem...\n"); - free(data); +fail: + printf ("Failed to mount ext2 filesystem...\n"); + free (data); ext2fs_root = NULL; - return(0); + return (0); } #endif /* CFG_CMD_EXT2FS */ diff --git a/include/asm-m68k/m5249.h b/include/asm-m68k/m5249.h index 7ff56303f..8c1b07755 100644 --- a/include/asm-m68k/m5249.h +++ b/include/asm-m68k/m5249.h @@ -143,8 +143,6 @@ #define MCFSIM_PLLCR 0x180 /* PLL Control register */ - - /* * Some symbol defines for the above... */ diff --git a/include/configs/APC405.h b/include/configs/APC405.h index 588f9f601..d46b8445a 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -130,8 +130,8 @@ /* The following table includes the supported baudrates */ #define CFG_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } + { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ + 57600, 115200, 230400, 460800, 921600 } #define CFG_LOAD_ADDR 0x100000 /* default load address */ #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ @@ -163,7 +163,7 @@ #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ - /* resource configuration */ + /* resource configuration */ #define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ @@ -236,7 +236,7 @@ #define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ #define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ #define CFG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars*/ - /* total size of a CAT24WC16 is 2048 bytes */ + /* total size of a CAT24WC16 is 2048 bytes */ #define CFG_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ #define CFG_NVRAM_SIZE 242 /* NVRAM size */ @@ -262,7 +262,7 @@ * Cache Configuration */ #define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */ - /* have only 8kB, 16kB is save here */ + /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index 45fcee00f..fab263b4b 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -145,11 +145,11 @@ | CFG_CMD_PCI \ | CFG_CMD_ELF \ | CFG_CMD_DATE \ - | CFG_CMD_NET \ - | CFG_CMD_PING \ - | CFG_CMD_IDE \ - | CFG_CMD_FAT \ - | CFG_CMD_EXT2 \ + | CFG_CMD_NET \ + | CFG_CMD_PING \ + | CFG_CMD_IDE \ + | CFG_CMD_FAT \ + | CFG_CMD_EXT2 \ ) #define CONFIG_DOS_PARTITION @@ -331,11 +331,11 @@ #define CFG_DEV3_PAR 0x8FCFFFFF /* nvram/can */ #define CFG_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */ - /* c 4 a 8 2 4 1 c */ - /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ - /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ - /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */ - /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */ + /* c 4 a 8 2 4 1 c */ + /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ + /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ + /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */ + /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */ /* MPP Control MV64360 Appendix P P. 632*/ @@ -392,8 +392,6 @@ #define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE) #define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE) - - /* PCI I/O MAP section */ #define CFG_PCI0_IO_BASE 0xfa000000 #define CFG_PCI0_IO_SIZE _16M diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index 2d52a8b50..119bc2442 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -51,9 +51,9 @@ #undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C ) & \ + CFG_CMD_BSP | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C ) & \ ~(CFG_CMD_NET)) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index f1955a513..595bd292b 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -426,7 +426,7 @@ * use PSC6: * on STK52xx: * use as UART. Pins PSC6_0 to PSC6_3 are used. - Bits 9:11 (mask: 0x00700000): + Bits 9:11 (mask: 0x00700000): * 101 -> PSC6 : Extended POST test is not available * on MINI-FAP and TQM5200_IB: * use PSC6_1 and PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000): diff --git a/include/ppc405.h b/include/ppc405.h index 1cd0c5594..44702400e 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -482,11 +482,11 @@ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) #define PLLMR0_266_66_33_33 (PLL_CPUDIV_1 | PLL_PLBDIV_4 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ - PLL_MALDIV_1 | PLL_PCIDIV_2) + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_2) #define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \ - PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) /* * PLL Voltage Controlled Oscillator (VCO) definitions diff --git a/include/universe.h b/include/universe.h index 684e9272b..2892d31b4 100644 --- a/include/universe.h +++ b/include/universe.h @@ -23,12 +23,10 @@ #ifndef _universe_h #define _universe_h - typedef struct _UNIVERSE UNIVERSE; typedef struct _SLAVE_IMAGE SLAVE_IMAGE; typedef struct _TDMA_CMD_PACKET TDMA_CMD_PACKET; - struct _SLAVE_IMAGE { unsigned int ctl; /* Control */ unsigned int bs; /* Base */ @@ -148,10 +146,3 @@ struct _TDMA_CMD_PACKET { #define PCI_MS_Mxx 0x03 #endif - - - - - - -