phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

* Fix PS/2 keyboard problem caused by statically initialized variable 

pointing to a location in flash

* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
This commit is contained in:
wdenk 2004-01-21 20:46:28 +00:00
parent c837dcb1a3
commit ef978730dc
5 changed files with 18 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
CHANGELOG
View File

@ -2,6 +2,11 @@
Changes since U-Boot 1.0.1: Changes since U-Boot 1.0.1:
====================================================================== ======================================================================
* Fix PS/2 keyboard problem caused by statically initialized variable
pointing to a location in flash
* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
* The PS/2 mux on the BMS2003 board needs 450 ms after power on * The PS/2 mux on the BMS2003 board needs 450 ms after power on
before we can access it; add delay in case we are faster (with no before we can access it; add delay in case we are faster (with no
CF card inserted) CF card inserted)

6
cpu/mips/incaip_clock.c
View File

@ -33,8 +33,8 @@
* *
* RETURNS: * RETURNS:
* 150.000.000 for 150 MHz * 150.000.000 for 150 MHz
* 130.000.000. for 130 Mhz * 133.333.333 for 133 Mhz (= 400MHz/3)
* 100.000.000. for 100 Mhz * 100.000.000 for 100 Mhz (= 400MHz/4)
* NOTE: * NOTE:
* This functions should be used by the hardware driver to get the correct * This functions should be used by the hardware driver to get the correct
* frequency of the CPU. Don't use the macros, which are set to init the CPU * frequency of the CPU. Don't use the macros, which are set to init the CPU
@ -55,7 +55,7 @@ uint incaip_get_cpuclk (void)
if (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0x40) { if (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0x40) {
/* Division value is 1/3, maximum CPU operating */ /* Division value is 1/3, maximum CPU operating */
/* frequency is 133.3 MHz */ /* frequency is 133.3 MHz */
return 130000000; return 133333333;
} else { } else {
/* Division value is 1/4, maximum CPU operating */ /* Division value is 1/4, maximum CPU operating */
/* frequency is 100 MHz */ /* frequency is 100 MHz */

2
drivers/keyboard.c
View File

@ -194,7 +194,7 @@ void handle_scancode(unsigned char scancode)
case 0xBA: /* caps lock released */ case 0xBA: /* caps lock released */
return; /* just swallow */ return; /* just swallow */
} }
#if 0 #if 1
if((scancode&0x80)==0x80) /* key released */ if((scancode&0x80)==0x80) /* key released */
return; return;
#else #else

11
drivers/ps2ser.c
View File

@ -29,7 +29,7 @@ static int ps2ser_getc_hw(void);
static void ps2ser_interrupt(void *dev_id); static void ps2ser_interrupt(void *dev_id);
extern struct serial_state rs_table[]; /* in serial.c */ extern struct serial_state rs_table[]; /* in serial.c */
static struct serial_state *state = rs_table + CONFIG_PS2SERIAL; static struct serial_state *state;
static u_char ps2buf[PS2BUF_SIZE]; static u_char ps2buf[PS2BUF_SIZE];
static atomic_t ps2buf_cnt; static atomic_t ps2buf_cnt;
@ -49,8 +49,13 @@ static inline void ps2ser_out(int offset, int value)
int ps2ser_init(void) int ps2ser_init(void)
{ {
int quot = state->baud_base / PS2SER_BAUD; int quot;
unsigned cval = 0x3; /* 8N1 - 8 data bits, no parity bits, 1 stop bit */ unsigned cval;
state = rs_table + CONFIG_PS2SERIAL;
quot = state->baud_base / PS2SER_BAUD;
cval = 0x3; /* 8N1 - 8 data bits, no parity bits, 1 stop bit */
/* Set speed, enable interrupts, enable FIFO /* Set speed, enable interrupts, enable FIFO
*/ */

2
include/configs/bms2003.h
View File

@ -78,7 +78,7 @@
"bootm $(kernel_addr) $(ramdisk_addr)\0" \ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM860L/uImage\0" \ "bootfile=/tftpboot/BMS/uImage\0" \
"kernel_addr=40040000\0" \ "kernel_addr=40040000\0" \
"ramdisk_addr=40100000\0" \ "ramdisk_addr=40100000\0" \
"" ""