* Patch by Xue Ligong (Joe), 13 Nov 2003:
add Realtek 8019 ethernet driver * Patch by Yuli Barcohen, 13 Nov 2003: MPC826xADS/PQ2FADS cleanup * Patch by Anders Larsen, 12 Nov 2003: Update README to mark the PORTIO commands non-standard
This commit is contained in:
wdenk
parent
5779d8d985
commit
ef5a9672c7
|
|
@ -2,6 +2,15 @@
|
|||
Changes since U-Boot 1.0.0:
|
||||
======================================================================
|
||||
|
||||
* Patch by Xue Ligong (Joe), 13 Nov 2003:
|
||||
add Realtek 8019 ethernet driver
|
||||
|
||||
* Patch by Yuli Barcohen, 13 Nov 2003:
|
||||
MPC826xADS/PQ2FADS cleanup
|
||||
|
||||
* Patch by Anders Larsen, 12 Nov 2003:
|
||||
Update README to mark the PORTIO commands non-standard
|
||||
|
||||
* Patch by Nicolas Lacressonnière, 12 Nov 2003:
|
||||
update for for Atmel AT91RM9200DK development kit:
|
||||
- support for environment variables in DataFlash
|
||||
|
|
|
|||
2
README
2
README
|
|
@ -634,7 +634,7 @@ The following options need to be configured:
|
|||
CFG_CMD_PCI * pciinfo
|
||||
CFG_CMD_PCMCIA * PCMCIA support
|
||||
CFG_CMD_PING * send ICMP ECHO_REQUEST to network host
|
||||
CFG_CMD_PORTIO Port I/O
|
||||
CFG_CMD_PORTIO * Port I/O
|
||||
CFG_CMD_REGINFO * Register dump
|
||||
CFG_CMD_RUN run command in env variable
|
||||
CFG_CMD_SAVES save S record dump
|
||||
|
|
|
|||
|
|
@ -1,9 +1,11 @@
|
|||
#
|
||||
# (C) Copyright 2001
|
||||
# (C) Copyright 2001-2003
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# Modified by, Stuart Hughes, Lineo Inc, stuarth@lineo.com
|
||||
#
|
||||
# Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
|
|
@ -24,9 +26,7 @@
|
|||
#
|
||||
|
||||
#
|
||||
# mpc8260ads board
|
||||
# MPC8260ADS, MPC8266ADS, and PQ2FADS-ZU/VR boards
|
||||
#
|
||||
|
||||
TEXT_BASE = 0xfff00000
|
||||
|
||||
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
|
||||
|
|
|
|||
|
|
@ -231,6 +231,20 @@ int board_pre_init (void)
|
|||
|
||||
bcsr[1] = ~FETHIEN1 & ~RS232EN_1;
|
||||
|
||||
#if CONFIG_ADSTYPE != CFG_8260ADS /* PCI mode can be selected */
|
||||
#if CONFIG_ADSTYPE == CFG_PQ2FADS
|
||||
if ((bcsr[3] & BCSR_PCI_MODE) == 0) /* PCI mode selected by JP9 */
|
||||
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
|
||||
{
|
||||
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
||||
|
||||
immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
|
||||
immap->im_siu_conf.sc_siumcr =
|
||||
(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
|
||||
| SIUMCR_LBPC01;
|
||||
}
|
||||
#endif /* CONFIG_ADSTYPE != CFG_8260ADS */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -239,32 +253,25 @@ int board_pre_init (void)
|
|||
long int initdram (int board_type)
|
||||
{
|
||||
#if CONFIG_ADSTYPE == CFG_PQ2FADS
|
||||
vu_long *bcsr = (vu_long *)CFG_BCSR;
|
||||
long int msize = 32;
|
||||
#else
|
||||
long int msize = 16;
|
||||
#endif
|
||||
|
||||
#ifndef CFG_RAMBOOT
|
||||
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
||||
volatile memctl8260_t *memctl = &immap->im_memctl;
|
||||
volatile uchar *ramaddr, c = 0xff;
|
||||
long int msize;
|
||||
uint or;
|
||||
uint psdmr;
|
||||
uint psrt;
|
||||
|
||||
int i;
|
||||
|
||||
#ifndef CFG_RAMBOOT
|
||||
immap->im_siu_conf.sc_ppc_acr = 0x00000002;
|
||||
immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
|
||||
immap->im_siu_conf.sc_tescr1 = 0x00004000;
|
||||
|
||||
#if CONFIG_ADSTYPE == CFG_PQ2FADS
|
||||
if ((bcsr[3] & BCSR_PCI_MODE) == 0) { /* PCI mode selected by JP9 */
|
||||
immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
|
||||
immap->im_siu_conf.sc_siumcr =
|
||||
(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
|
||||
| SIUMCR_LBPC01;
|
||||
}
|
||||
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
|
||||
|
||||
memctl->memc_mptpr = CFG_MPTPR;
|
||||
#ifdef CFG_LSDRAM_BASE
|
||||
/*
|
||||
|
|
@ -431,13 +438,7 @@ long int initdram (int board_type)
|
|||
#endif /* SPD_DEBUG */
|
||||
}
|
||||
#else /* !CONFIG_SPD_EEPROM */
|
||||
#if CONFIG_ADSTYPE == CFG_PQ2FADS
|
||||
msize = 32;
|
||||
or = 0xFE002EC0;
|
||||
#else
|
||||
msize = 16;
|
||||
or = 0xFF000CA0;
|
||||
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
|
||||
or = CFG_OR2;
|
||||
psdmr = CFG_PSDMR;
|
||||
psrt = CFG_PSRT;
|
||||
#endif /* CONFIG_SPD_EEPROM */
|
||||
|
|
@ -455,7 +456,7 @@ long int initdram (int board_type)
|
|||
*ramaddr = c;
|
||||
memctl->memc_psdmr = psdmr | 0x40000000; /* Refresh enable */
|
||||
*ramaddr = c;
|
||||
#endif
|
||||
#endif /* CFG_RAMBOOT */
|
||||
|
||||
/* return total 60x bus SDRAM size */
|
||||
return (msize * 1024 * 1024);
|
||||
|
|
|
|||
|
|
@ -1,7 +1,9 @@
|
|||
/*
|
||||
* (C) Copyright 2001
|
||||
* (C) Copyright 2001-2003
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* Modified by Yuli Barcohen <yuli@arabellasw.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
|
|
@ -22,9 +24,6 @@
|
|||
*/
|
||||
|
||||
OUTPUT_ARCH(powerpc)
|
||||
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
|
||||
/* Do we need any of these for elf?
|
||||
__DYNAMIC = 0; */
|
||||
SECTIONS
|
||||
{
|
||||
/* Read-only sections, merged into text segment: */
|
||||
|
|
@ -120,3 +119,4 @@ SECTIONS
|
|||
_end = . ;
|
||||
PROVIDE (end = .);
|
||||
}
|
||||
ENTRY(_start)
|
||||
|
|
|
|||
|
|
@ -36,6 +36,7 @@ OBJS = 3c589.o 5701rls.o ali512x.o \
|
|||
ns16550.o ns8382x.o ns87308.o \
|
||||
pci.o pci_auto.o pci_indirect.o \
|
||||
pcnet.o plb2800_eth.o \
|
||||
rtl8019.o \
|
||||
s3c24x0_i2c.o sed13806.o serial.o \
|
||||
serial_max3100.o \
|
||||
smc91111.o smiLynxEM.o sym53c8xx.o \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,282 @@
|
|||
/*
|
||||
* Realtek 8019AS Ethernet
|
||||
* (C) Copyright 2002-2003
|
||||
* Xue Ligong(lgxue@hotmail.com),Wang Kehao, ESLAB, whut.edu.cn
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
* This code works in 8bit mode.
|
||||
* If you need to work in 16bit mode, PLS change it!
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <command.h>
|
||||
#include "rtl8019.h"
|
||||
#include <net.h>
|
||||
|
||||
#ifdef CONFIG_DRIVER_RTL8019
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_NET)
|
||||
|
||||
|
||||
/* packet page register access functions */
|
||||
|
||||
|
||||
static unsigned char get_reg (unsigned int regno)
|
||||
{
|
||||
return (*(unsigned char *) regno);
|
||||
}
|
||||
|
||||
|
||||
static void put_reg (unsigned int regno, unsigned char val)
|
||||
{
|
||||
*(volatile unsigned char *) regno = val;
|
||||
}
|
||||
|
||||
static void eth_reset (void)
|
||||
{
|
||||
unsigned char ucTemp;
|
||||
|
||||
/* reset NIC */
|
||||
ucTemp = get_reg (RTL8019_RESET);
|
||||
put_reg (RTL8019_RESET, ucTemp);
|
||||
put_reg (RTL8019_INTERRUPTSTATUS, 0xff);
|
||||
udelay (2000); /* wait for 2ms */
|
||||
}
|
||||
|
||||
void rtl8019_get_enetaddr (uchar * addr)
|
||||
{
|
||||
unsigned char i;
|
||||
unsigned char temp;
|
||||
|
||||
eth_reset ();
|
||||
|
||||
put_reg (RTL8019_COMMAND, RTL8019_REMOTEDMARD);
|
||||
put_reg (RTL8019_DATACONFIGURATION, 0x48);
|
||||
put_reg (RTL8019_REMOTESTARTADDRESS0, 0x00);
|
||||
put_reg (RTL8019_REMOTESTARTADDRESS1, 0x00);
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT0, 12);
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT1, 0x00);
|
||||
put_reg (RTL8019_COMMAND, RTL8019_REMOTEDMARD);
|
||||
printf ("MAC: ");
|
||||
for (i = 0; i < 6; i++) {
|
||||
temp = get_reg (RTL8019_DMA_DATA);
|
||||
*addr++ = temp;
|
||||
temp = get_reg (RTL8019_DMA_DATA);
|
||||
printf ("%x:", temp);
|
||||
}
|
||||
|
||||
while ((!get_reg (RTL8019_INTERRUPTSTATUS) & 0x40));
|
||||
printf ("\b \n");
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT0, 0x00);
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT1, 0x00);
|
||||
put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
|
||||
}
|
||||
|
||||
|
||||
void eth_halt (void)
|
||||
{
|
||||
put_reg (RTL8019_COMMAND, 0x01);
|
||||
}
|
||||
|
||||
int eth_init (bd_t * bd)
|
||||
{
|
||||
eth_reset ();
|
||||
put_reg (RTL8019_COMMAND, RTL8019_PAGE0STOP);
|
||||
put_reg (RTL8019_DATACONFIGURATION, 0x48);
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT0, 0x00);
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT1, 0x00);
|
||||
put_reg (RTL8019_RECEIVECONFIGURATION, 0x00); /*00; */
|
||||
put_reg (RTL8019_TRANSMITPAGE, RTL8019_TPSTART);
|
||||
put_reg (RTL8019_TRANSMITCONFIGURATION, 0x02);
|
||||
put_reg (RTL8019_PAGESTART, RTL8019_PSTART);
|
||||
put_reg (RTL8019_BOUNDARY, RTL8019_PSTART);
|
||||
put_reg (RTL8019_PAGESTOP, RTL8019_PSTOP);
|
||||
put_reg (RTL8019_INTERRUPTSTATUS, 0xff);
|
||||
put_reg (RTL8019_INTERRUPTMASK, 0x11); /*b; */
|
||||
put_reg (RTL8019_COMMAND, RTL8019_PAGE1STOP);
|
||||
put_reg (RTL8019_PHYSICALADDRESS0, bd->bi_enetaddr[0]);
|
||||
put_reg (RTL8019_PHYSICALADDRESS1, bd->bi_enetaddr[1]);
|
||||
put_reg (RTL8019_PHYSICALADDRESS2, bd->bi_enetaddr[2]);
|
||||
put_reg (RTL8019_PHYSICALADDRESS3, bd->bi_enetaddr[3]);
|
||||
put_reg (RTL8019_PHYSICALADDRESS4, bd->bi_enetaddr[4]);
|
||||
put_reg (RTL8019_PHYSICALADDRESS5, bd->bi_enetaddr[5]);
|
||||
put_reg (RTL8019_MULTIADDRESS0, 0x00);
|
||||
put_reg (RTL8019_MULTIADDRESS1, 0x00);
|
||||
put_reg (RTL8019_MULTIADDRESS2, 0x00);
|
||||
put_reg (RTL8019_MULTIADDRESS3, 0x00);
|
||||
put_reg (RTL8019_MULTIADDRESS4, 0x00);
|
||||
put_reg (RTL8019_MULTIADDRESS5, 0x00);
|
||||
put_reg (RTL8019_MULTIADDRESS6, 0x00);
|
||||
put_reg (RTL8019_MULTIADDRESS7, 0x00);
|
||||
put_reg (RTL8019_CURRENT, RTL8019_PSTART);
|
||||
put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
|
||||
put_reg (RTL8019_TRANSMITCONFIGURATION, 0xe0); /*58; */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static unsigned char nic_to_pc (void)
|
||||
{
|
||||
unsigned char rec_head_status;
|
||||
unsigned char next_packet_pointer;
|
||||
unsigned char packet_length0;
|
||||
unsigned char packet_length1;
|
||||
unsigned short rxlen = 0;
|
||||
unsigned int i = 4;
|
||||
unsigned char current_point;
|
||||
unsigned char *addr;
|
||||
|
||||
/*
|
||||
* The RTL8019's first 4B is packet status,page of next packet
|
||||
* and packet length(2B).So we receive the fist 4B.
|
||||
*/
|
||||
put_reg (RTL8019_REMOTESTARTADDRESS1, get_reg (RTL8019_BOUNDARY));
|
||||
put_reg (RTL8019_REMOTESTARTADDRESS0, 0x00);
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT1, 0x00);
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT0, 0x04);
|
||||
|
||||
put_reg (RTL8019_COMMAND, RTL8019_REMOTEDMARD);
|
||||
|
||||
rec_head_status = get_reg (RTL8019_DMA_DATA);
|
||||
next_packet_pointer = get_reg (RTL8019_DMA_DATA);
|
||||
packet_length0 = get_reg (RTL8019_DMA_DATA);
|
||||
packet_length1 = get_reg (RTL8019_DMA_DATA);
|
||||
|
||||
put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
|
||||
/*Packet length is in two 8bit registers */
|
||||
rxlen = packet_length1;
|
||||
rxlen = (((rxlen << 8) & 0xff00) + packet_length0);
|
||||
rxlen -= 4;
|
||||
|
||||
if (rxlen > PKTSIZE_ALIGN + PKTALIGN)
|
||||
printf ("packet too big!\n");
|
||||
|
||||
/*Receive the packet */
|
||||
put_reg (RTL8019_REMOTESTARTADDRESS0, 0x04);
|
||||
put_reg (RTL8019_REMOTESTARTADDRESS1, get_reg (RTL8019_BOUNDARY));
|
||||
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT0, (rxlen & 0xff));
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT1, ((rxlen >> 8) & 0xff));
|
||||
|
||||
|
||||
put_reg (RTL8019_COMMAND, RTL8019_REMOTEDMARD);
|
||||
|
||||
for (addr = (unsigned char *) NetRxPackets[0], i = rxlen; i > 0; i--)
|
||||
*addr++ = get_reg (RTL8019_DMA_DATA);
|
||||
/* Pass the packet up to the protocol layers. */
|
||||
NetReceive (NetRxPackets[0], rxlen);
|
||||
|
||||
while (!(get_reg (RTL8019_INTERRUPTSTATUS)) & 0x40); /* wait for the op. */
|
||||
|
||||
/*
|
||||
* To test whether the packets are all received,get the
|
||||
* location of current point
|
||||
*/
|
||||
put_reg (RTL8019_COMMAND, RTL8019_PAGE1);
|
||||
current_point = get_reg (RTL8019_CURRENT);
|
||||
put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
|
||||
put_reg (RTL8019_BOUNDARY, next_packet_pointer);
|
||||
return current_point;
|
||||
}
|
||||
|
||||
/* Get a data block via Ethernet */
|
||||
extern int eth_rx (void)
|
||||
{
|
||||
unsigned char temp, current_point;
|
||||
|
||||
put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
|
||||
|
||||
while (1) {
|
||||
temp = get_reg (RTL8019_INTERRUPTSTATUS);
|
||||
|
||||
if (temp & 0x90) {
|
||||
/*overflow */
|
||||
put_reg (RTL8019_COMMAND, RTL8019_PAGE0STOP);
|
||||
udelay (2000);
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT0, 0);
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT1, 0);
|
||||
put_reg (RTL8019_TRANSMITCONFIGURATION, 2);
|
||||
do {
|
||||
current_point = nic_to_pc ();
|
||||
} while (get_reg (RTL8019_BOUNDARY) != current_point);
|
||||
|
||||
put_reg (RTL8019_TRANSMITCONFIGURATION, 0xe0);
|
||||
}
|
||||
|
||||
if (temp & 0x1) {
|
||||
/*packet received */
|
||||
do {
|
||||
put_reg (RTL8019_INTERRUPTSTATUS, 0x01);
|
||||
current_point = nic_to_pc ();
|
||||
} while (get_reg (RTL8019_BOUNDARY) != current_point);
|
||||
}
|
||||
|
||||
if (!(temp & 0x1))
|
||||
return 0;
|
||||
/* done and exit. */
|
||||
}
|
||||
}
|
||||
|
||||
/* Send a data block via Ethernet. */
|
||||
extern int eth_send (volatile void *packet, int length)
|
||||
{
|
||||
volatile unsigned char *p;
|
||||
unsigned int pn;
|
||||
|
||||
pn = length;
|
||||
p = (volatile unsigned char *) packet;
|
||||
|
||||
while (get_reg (RTL8019_COMMAND) == RTL8019_TRANSMIT);
|
||||
|
||||
put_reg (RTL8019_REMOTESTARTADDRESS0, 0);
|
||||
put_reg (RTL8019_REMOTESTARTADDRESS1, RTL8019_TPSTART);
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT0, (pn & 0xff));
|
||||
put_reg (RTL8019_REMOTEBYTECOUNT1, ((pn >> 8) & 0xff));
|
||||
|
||||
put_reg (RTL8019_COMMAND, RTL8019_REMOTEDMAWR);
|
||||
while (pn > 0) {
|
||||
put_reg (RTL8019_DMA_DATA, *p++);
|
||||
pn--;
|
||||
}
|
||||
|
||||
pn = length;
|
||||
|
||||
while (pn < 60) { /*Padding */
|
||||
put_reg (RTL8019_DMA_DATA, 0);
|
||||
pn++;
|
||||
}
|
||||
|
||||
while (!(get_reg (RTL8019_INTERRUPTSTATUS)) & 0x40);
|
||||
|
||||
put_reg (RTL8019_INTERRUPTSTATUS, 0x40);
|
||||
put_reg (RTL8019_TRANSMITPAGE, RTL8019_TPSTART);
|
||||
put_reg (RTL8019_TRANSMITBYTECOUNT0, (pn & 0xff));
|
||||
put_reg (RTL8019_TRANSMITBYTECOUNT1, ((pn >> 8 & 0xff)));
|
||||
put_reg (RTL8019_COMMAND, RTL8019_TRANSMIT);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif /* COMMANDS & CFG_NET */
|
||||
|
||||
#endif /* CONFIG_DRIVER_RTL8019 */
|
||||
|
|
@ -0,0 +1,135 @@
|
|||
/*
|
||||
* Realtek 8019AS Ethernet
|
||||
* (C) Copyright 2002-2003
|
||||
* Xue Ligong(lgxue@hotmail.com),Wang Kehao, ESLAB, whut.edu.cn
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
* This code works in 8bit mode.
|
||||
* If you need to work in 16bit mode, PLS change it!
|
||||
*/
|
||||
|
||||
#include <asm/types.h>
|
||||
#include <config.h>
|
||||
|
||||
|
||||
#ifdef CONFIG_DRIVER_RTL8019
|
||||
|
||||
#define RTL8019_REG_00 (RTL8019_BASE + 0x00)
|
||||
#define RTL8019_REG_01 (RTL8019_BASE + 0x01)
|
||||
#define RTL8019_REG_02 (RTL8019_BASE + 0x02)
|
||||
#define RTL8019_REG_03 (RTL8019_BASE + 0x03)
|
||||
#define RTL8019_REG_04 (RTL8019_BASE + 0x04)
|
||||
#define RTL8019_REG_05 (RTL8019_BASE + 0x05)
|
||||
#define RTL8019_REG_06 (RTL8019_BASE + 0x06)
|
||||
#define RTL8019_REG_07 (RTL8019_BASE + 0x07)
|
||||
#define RTL8019_REG_08 (RTL8019_BASE + 0x08)
|
||||
#define RTL8019_REG_09 (RTL8019_BASE + 0x09)
|
||||
#define RTL8019_REG_0a (RTL8019_BASE + 0x0a)
|
||||
#define RTL8019_REG_0b (RTL8019_BASE + 0x0b)
|
||||
#define RTL8019_REG_0c (RTL8019_BASE + 0x0c)
|
||||
#define RTL8019_REG_0d (RTL8019_BASE + 0x0d)
|
||||
#define RTL8019_REG_0e (RTL8019_BASE + 0x0e)
|
||||
#define RTL8019_REG_0f (RTL8019_BASE + 0x0f)
|
||||
#define RTL8019_REG_10 (RTL8019_BASE + 0x10)
|
||||
#define RTL8019_REG_1f (RTL8019_BASE + 0x1f)
|
||||
|
||||
#define RTL8019_COMMAND RTL8019_REG_00
|
||||
#define RTL8019_PAGESTART RTL8019_REG_01
|
||||
#define RTL8019_PAGESTOP RTL8019_REG_02
|
||||
#define RTL8019_BOUNDARY RTL8019_REG_03
|
||||
#define RTL8019_TRANSMITSTATUS RTL8019_REG_04
|
||||
#define RTL8019_TRANSMITPAGE RTL8019_REG_04
|
||||
#define RTL8019_TRANSMITBYTECOUNT0 RTL8019_REG_05
|
||||
#define RTL8019_NCR RTL8019_REG_05
|
||||
#define RTL8019_TRANSMITBYTECOUNT1 RTL8019_REG_06
|
||||
#define RTL8019_INTERRUPTSTATUS RTL8019_REG_07
|
||||
#define RTL8019_CURRENT RTL8019_REG_07
|
||||
#define RTL8019_REMOTESTARTADDRESS0 RTL8019_REG_08
|
||||
#define RTL8019_CRDMA0 RTL8019_REG_08
|
||||
#define RTL8019_REMOTESTARTADDRESS1 RTL8019_REG_09
|
||||
#define RTL8019_CRDMA1 RTL8019_REG_09
|
||||
#define RTL8019_REMOTEBYTECOUNT0 RTL8019_REG_0a
|
||||
#define RTL8019_REMOTEBYTECOUNT1 RTL8019_REG_0b
|
||||
#define RTL8019_RECEIVESTATUS RTL8019_REG_0c
|
||||
#define RTL8019_RECEIVECONFIGURATION RTL8019_REG_0c
|
||||
#define RTL8019_TRANSMITCONFIGURATION RTL8019_REG_0d
|
||||
#define RTL8019_FAE_TALLY RTL8019_REG_0d
|
||||
#define RTL8019_DATACONFIGURATION RTL8019_REG_0e
|
||||
#define RTL8019_CRC_TALLY RTL8019_REG_0e
|
||||
#define RTL8019_INTERRUPTMASK RTL8019_REG_0f
|
||||
#define RTL8019_MISS_PKT_TALLY RTL8019_REG_0f
|
||||
#define RTL8019_PHYSICALADDRESS0 RTL8019_REG_01
|
||||
#define RTL8019_PHYSICALADDRESS1 RTL8019_REG_02
|
||||
#define RTL8019_PHYSICALADDRESS2 RTL8019_REG_03
|
||||
#define RTL8019_PHYSICALADDRESS3 RTL8019_REG_04
|
||||
#define RTL8019_PHYSICALADDRESS4 RTL8019_REG_05
|
||||
#define RTL8019_PHYSICALADDRESS5 RTL8019_REG_06
|
||||
#define RTL8019_MULTIADDRESS0 RTL8019_REG_08
|
||||
#define RTL8019_MULTIADDRESS1 RTL8019_REG_09
|
||||
#define RTL8019_MULTIADDRESS2 RTL8019_REG_0a
|
||||
#define RTL8019_MULTIADDRESS3 RTL8019_REG_0b
|
||||
#define RTL8019_MULTIADDRESS4 RTL8019_REG_0c
|
||||
#define RTL8019_MULTIADDRESS5 RTL8019_REG_0d
|
||||
#define RTL8019_MULTIADDRESS6 RTL8019_REG_0e
|
||||
#define RTL8019_MULTIADDRESS7 RTL8019_REG_0f
|
||||
#define RTL8019_DMA_DATA RTL8019_REG_10
|
||||
#define RTL8019_RESET RTL8019_REG_1f
|
||||
|
||||
|
||||
#define RTL8019_PAGE0 0x22
|
||||
#define RTL8019_PAGE1 0x62
|
||||
#define RTL8019_PAGE0DMAWRITE 0x12
|
||||
#define RTL8019_PAGE2DMAWRITE 0x92
|
||||
#define RTL8019_REMOTEDMAWR 0x12
|
||||
#define RTL8019_REMOTEDMARD 0x0A
|
||||
#define RTL8019_ABORTDMAWR 0x32
|
||||
#define RTL8019_ABORTDMARD 0x2A
|
||||
#define RTL8019_PAGE0STOP 0x21
|
||||
#define RTL8019_PAGE1STOP 0x61
|
||||
#define RTL8019_TRANSMIT 0x26
|
||||
#define RTL8019_TXINPROGRESS 0x04
|
||||
#define RTL8019_SEND 0x1A
|
||||
|
||||
#define RTL8019_PSTART 0x4c
|
||||
#define RTL8019_PSTOP 0x80
|
||||
#define RTL8019_TPSTART 0x40
|
||||
|
||||
|
||||
#endif /*end of CONFIG_DRIVER_RTL8019*/
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -10,7 +10,7 @@
|
|||
* (C) Copyright 2003 Arabella Software Ltd.
|
||||
* Yuli Barcohen <yuli@arabellasw.com>
|
||||
* Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
|
||||
* Ported to PQ2FADS-ZU board.
|
||||
* Ported to PQ2FADS-ZU and PQ2FADS-VR boards.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
|
|
@ -45,7 +45,7 @@
|
|||
/* ADS flavours */
|
||||
#define CFG_8260ADS 1 /* MPC8260ADS */
|
||||
#define CFG_8266ADS 2 /* MPC8266ADS */
|
||||
#define CFG_PQ2FADS 3 /* PQ2FADS-ZU */
|
||||
#define CFG_PQ2FADS 3 /* PQ2FADS-ZU or PQ2FADS-VR */
|
||||
|
||||
#ifndef CONFIG_ADSTYPE
|
||||
#define CONFIG_ADSTYPE CFG_8260ADS
|
||||
|
|
@ -130,7 +130,7 @@
|
|||
#undef CONFIG_SPD_EEPROM /* On PQ2FADS-ZU, SDRAM is soldered */
|
||||
#else
|
||||
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
|
||||
#define CFG_I2C_SLAVE 0x7F
|
||||
|
||||
#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
|
||||
|
|
@ -139,14 +139,14 @@
|
|||
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
|
||||
|
||||
#ifndef CONFIG_SDRAM_PBI
|
||||
#define CONFIG_SDRAM_PBI 1 /* By default, use page-based interleaving */
|
||||
#define CONFIG_SDRAM_PBI 0 /* By default, use bank-based interleaving */
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_8260_CLKIN
|
||||
#if CONFIG_ADSTYPE == CFG_PQ2FADS
|
||||
#define CONFIG_8260_CLKIN 100000000 /* in Hz */
|
||||
#else
|
||||
#define CONFIG_8260_CLKIN 66666666 /* in Hz */
|
||||
#define CONFIG_8260_CLKIN 66000000 /* in Hz */
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
@ -188,7 +188,6 @@
|
|||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
|
||||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
||||
#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */
|
||||
#define CONFIG_BOOTARGS "root=/dev/ram rw"
|
||||
|
|
@ -201,7 +200,8 @@
|
|||
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
|
||||
#endif
|
||||
|
||||
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
|
||||
#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
|
||||
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
|
|
@ -291,9 +291,14 @@
|
|||
#endif
|
||||
|
||||
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
||||
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
#ifdef CONFIG_BZIP2
|
||||
#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
|
||||
#else
|
||||
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */
|
||||
#endif /* CONFIG_BZIP2 */
|
||||
|
||||
#ifndef CFG_RAMBOOT
|
||||
# define CFG_ENV_IS_IN_FLASH 1
|
||||
# define CFG_ENV_SECT_SIZE 0x40000
|
||||
|
|
@ -335,12 +340,14 @@
|
|||
#endif /* CONFIG_ADSTYPE == CFG_8266ADS */
|
||||
|
||||
#if CONFIG_ADSTYPE == CFG_PQ2FADS
|
||||
#define CFG_OR2 0xFE002EC0
|
||||
#define CFG_PSDMR 0x824B36A3
|
||||
#define CFG_PSRT 0x13
|
||||
#define CFG_LSDMR 0x828737A3
|
||||
#define CFG_LSRT 0x13
|
||||
#define CFG_MPTPR 0x2800
|
||||
#else
|
||||
#define CFG_OR2 0xFF000CA0
|
||||
#define CFG_PSDMR 0x016EB452
|
||||
#define CFG_PSRT 0x21
|
||||
#define CFG_LSDMR 0x0086A522
|
||||
|
|
|
|||
|
|
@ -54,6 +54,10 @@ const char version_string[] =
|
|||
extern void cs8900_get_enetaddr (uchar * addr);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_DRIVER_CS8900
|
||||
extern void rtl8019_get_enetaddr (uchar * addr);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_DRIVER_LAN91C96
|
||||
#include "../drivers/lan91c96.h"
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Reference in New Issue