ColdFire 54455: Fix correct boot location for atmel and intel

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
This commit is contained in:
TsiChungLiew 2007-10-25 17:16:22 -05:00
parent 688e8eb414
commit e8ee8f3ade
3 changed files with 27 additions and 17 deletions

View File

@ -1733,9 +1733,13 @@ M54455EVB_i66_config : unconfig
>include/config.h ; \
if [ "$${FLASH}" == "INTEL" ] ; then \
echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
echo "... with INTEL boot..." ; \
else \
echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
echo "... with ATMEL boot..." ; \
fi; \
echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \

View File

@ -22,4 +22,6 @@
# MA 02111-1307 USA
#
TEXT_BASE = 0
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)

View File

@ -27,8 +27,8 @@
* board/config.h - configuration options, board specific
*/
#ifndef _JAMICA54455_H
#define _JAMICA54455_H
#ifndef _M54455EVB_H
#define _M54455EVB_H
/*
* High Level Configuration Options
@ -75,7 +75,7 @@
#define CONFIG_CMD_MISC
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_PCI
#undef CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
@ -129,8 +129,8 @@
"u-boot=u-boot.bin\0" \
"load=tftp ${loadaddr) ${u-boot}\0" \
"upd=run load; run prog\0" \
"prog=prot off 0 2ffff;" \
"era 0 2ffff;" \
"prog=prot off 4000000 402ffff;" \
"era 4000000 402ffff;" \
"cp.b ${loadaddr} 0 ${filesize};" \
"save\0" \
""
@ -174,6 +174,7 @@
#define CFG_IMMR CFG_MBAR
/* PCI */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI 1
#define CFG_PCI_MEM_BUS 0xA0000000
@ -187,6 +188,7 @@
#define CFG_PCI_CFG_BUS 0xB0000000
#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS
#define CFG_PCI_CFG_SIZE 0x01000000
#endif
/* FPGA - Spartan 2 */
/* experiment
@ -268,8 +270,6 @@
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
*/
#define CFG_ENV_OFFSET 0x4000
#define CFG_ENV_SECT_SIZE 0x2000
#define CFG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_OVERWRITE 1
#undef CFG_ENV_IS_EMBEDDED
@ -278,13 +278,17 @@
* FLASH organization
*/
#ifdef CFG_ATMEL_BOOT
# define CFG_FLASH_BASE 0
# define CFG_FLASH_BASE CFG_CS0_BASE
# define CFG_FLASH0_BASE CFG_CS0_BASE
# define CFG_FLASH1_BASE CFG_CS1_BASE
# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000)
# define CFG_ENV_SECT_SIZE 0x2000
#else
# define CFG_FLASH_BASE CFG_FLASH0_BASE
# define CFG_FLASH0_BASE CFG_CS1_BASE
# define CFG_FLASH1_BASE CFG_CS0_BASE
# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000)
# define CFG_ENV_SECT_SIZE 0x20000
#endif
/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system
@ -328,9 +332,9 @@
* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
*/
#ifdef CFG_ATMEL_BOOT
# define CONFIG_JFFS2_DEV "nor0"
# define CONFIG_JFFS2_DEV "nor1"
# define CONFIG_JFFS2_PART_SIZE 0x01000000
# define CONFIG_JFFS2_PART_OFFSET CFG_FLASH1_BASE
# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH1_BASE + 0x500000)
#else
# define CONFIG_JFFS2_DEV "nor0"
# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000)
@ -356,20 +360,20 @@
#ifdef CFG_ATMEL_BOOT
/* Atmel Flash */
#define CFG_CS0_BASE 0
#define CFG_CS0_BASE 0x04000000
#define CFG_CS0_MASK 0x00070001
#define CFG_CS0_CTRL 0x00001140
/* Intel Flash */
#define CFG_CS1_BASE 0x04000000
#define CFG_CS1_BASE 0x00000000
#define CFG_CS1_MASK 0x01FF0001
#define CFG_CS1_CTRL 0x003F3D60
#define CFG_CS1_CTRL 0x00000D60
#define CFG_ATMEL_BASE CFG_CS0_BASE
#else
/* Intel Flash */
#define CFG_CS0_BASE 0
#define CFG_CS0_BASE 0x00000000
#define CFG_CS0_MASK 0x01FF0001
#define CFG_CS0_CTRL 0x003F3D60
#define CFG_CS0_CTRL 0x00000D60
/* Atmel Flash */
#define CFG_CS1_BASE 0x04000000
#define CFG_CS1_MASK 0x00070001
@ -388,4 +392,4 @@
#define CFG_CS3_MASK 0x00070001
#define CFG_CS3_CTRL 0x00000020
#endif /* _JAMICA54455_H */
#endif /* _M54455EVB_H */