phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

net: Divided code of NE2000 ethernet driver 

There are more devices of the NE2000 base.
A present code is difficult for us to support more devices.
To support more NE2000 clone devices, separated the function.

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
This commit is contained in:
goda.yusuke 2008-03-05 17:08:20 +09:00 committed by Wolfgang Denk
parent 395bce4f59
commit e710185aae
3 changed files with 453 additions and 352 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

215
drivers/net/ne2000.c
View File

@ -82,25 +82,11 @@ Add SNMP
#ifdef CONFIG_DRIVER_NE2000
/* wor around udelay resetting OCR */
static void my_udelay(long us) {
long tmo;
tmo = get_timer (0) + us * CFG_HZ / 1000000; /* will this be much greater than 0 ? */
while (get_timer (0) < tmo);
}
#define mdelay(n) my_udelay((n)*1000)
#define mdelay(n) udelay((n)*1000)
/* forward definition of function used for the uboot interface */
void uboot_push_packet_len(int len);
void uboot_push_tx_done(int key, int val);
/* timeout for tx/rx in s */
#define TOUT 5
#define ETHER_ADDR_LEN 6
/*
------------------------------------------------------------------------
Debugging details
@ -118,27 +104,26 @@ void uboot_push_tx_done(int key, int val);
#if DEBUG & 1
#define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0)
#define DEBUG_LINE() do { printf("%d\n", __LINE__); } while (0)
#define PRINTK(args...) printf(args)
#else
#define DEBUG_FUNCTION() do {} while(0)
#define DEBUG_LINE() do {} while(0)
#endif
#include "ne2000.h"
#if DEBUG & 1
#define PRINTK(args...) printf(args)
#else
#define PRINTK(args...)
#endif
/* NE2000 base header file */
#include "ne2000_base.h"
/* Basic NE2000 chip support */
#include "ne2000.h"
static dp83902a_priv_data_t nic; /* just one instance of the card supported */
static bool
dp83902a_init(void)
{
dp83902a_priv_data_t *dp = &nic;
cyg_uint8* base;
int i;
u8* base;
DEBUG_FUNCTION();
@ -147,6 +132,7 @@ dp83902a_init(void)
DEBUG_LINE();
#if defined(NE2000_BASIC_INIT)
/* Prepare ESA */
DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1); /* Select page 1 */
/* Use the address from the serial EEPROM */
@ -163,6 +149,7 @@ dp83902a_init(void)
dp->esa[4],
dp->esa[5] );
#endif /* NE2000_BASIC_INIT */
return true;
}
@ -170,7 +157,7 @@ static void
dp83902a_stop(void)
{
dp83902a_priv_data_t *dp = &nic;
cyg_uint8 *base = dp->base;
u8 *base = dp->base;
DEBUG_FUNCTION();
@ -188,10 +175,10 @@ dp83902a_stop(void)
the hardware ready to send/receive packets.
*/
static void
dp83902a_start(unsigned char * enaddr)
dp83902a_start(u8 * enaddr)
{
dp83902a_priv_data_t *dp = &nic;
cyg_uint8 *base = dp->base;
u8 *base = dp->base;
int i;
DEBUG_FUNCTION();
@ -206,15 +193,20 @@ dp83902a_start(unsigned char * enaddr)
dp->tx1 = dp->tx2 = 0;
dp->tx_next = dp->tx_buf1;
dp->tx_started = false;
dp->running = true;
DP_OUT(base, DP_PSTART, dp->rx_buf_start); /* Receive ring start page */
DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1); /* Receive ring boundary */
DP_OUT(base, DP_PSTOP, dp->rx_buf_end); /* Receive ring end page */
dp->rx_next = dp->rx_buf_start-1;
dp->running = true;
DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */
DP_OUT(base, DP_IMR, DP_IMR_All); /* Enable all interrupts */
DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP); /* Select page 1 */
DP_OUT(base, DP_P1_CURP, dp->rx_buf_start); /* Current page - next free page for Rx */
dp->running = true;
for (i = 0; i < ETHER_ADDR_LEN; i++) {
/* FIXME */
//*((vu_short*)( base + ((DP_P1_PAR0 + i) * 2) + 0x1400)) = enaddr[i];
DP_OUT(base, DP_P1_PAR0+i, enaddr[i]);
}
/* Enable and start device */
@ -222,6 +214,7 @@ dp83902a_start(unsigned char * enaddr)
DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* Normal transmit operations */
DP_OUT(base, DP_RCR, DP_RCR_AB); /* Accept broadcast, no errors, no multicast */
dp->running = true;
}
/*
@ -234,7 +227,7 @@ static void
dp83902a_start_xmit(int start_page, int len)
{
dp83902a_priv_data_t *dp = (dp83902a_priv_data_t *) &nic;
cyg_uint8 *base = dp->base;
u8 *base = dp->base;
DEBUG_FUNCTION();
@ -259,10 +252,10 @@ dp83902a_start_xmit(int start_page, int len)
that there is free buffer space (dp->tx_next).
*/
static void
dp83902a_send(unsigned char *data, int total_len, unsigned long key)
dp83902a_send(u8 *data, int total_len, u32 key)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
cyg_uint8 *base = dp->base;
u8 *base = dp->base;
int len, start_page, pkt_len, i, isr;
#if DEBUG & 4
int dx;
@ -296,7 +289,7 @@ dp83902a_send(unsigned char *data, int total_len, unsigned long key)
/* but the code is extended a bit to do what Hitachi's monitor */
/* does (i.e., also read data). */
cyg_uint16 tmp;
u16 tmp;
int len = 1;
DP_OUT(base, DP_RSAL, 0x100-len);
@ -322,7 +315,7 @@ dp83902a_send(unsigned char *data, int total_len, unsigned long key)
/* Put data into buffer */
#if DEBUG & 4
printf(" sg buf %08lx len %08x\n ", (unsigned long) data, len);
printf(" sg buf %08lx len %08x\n ", (u32)data, len);
dx = 0;
#endif
while (len > 0) {
@ -330,6 +323,7 @@ dp83902a_send(unsigned char *data, int total_len, unsigned long key)
printf(" %02x", *data);
if (0 == (++dx % 16)) printf("\n ");
#endif
DP_OUT_DATA(dp->data, *data++);
len--;
}
@ -358,6 +352,7 @@ dp83902a_send(unsigned char *data, int total_len, unsigned long key)
do {
DP_IN(base, DP_ISR, isr);
} while ((isr & DP_ISR_RDC) == 0);
/* Then disable DMA */
DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
@ -383,9 +378,9 @@ static void
dp83902a_RxEvent(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
cyg_uint8 *base = dp->base;
unsigned char rsr;
unsigned char rcv_hdr[4];
u8 *base = dp->base;
u8 rsr;
u8 rcv_hdr[4];
int i, len, pkt, cur;
DEBUG_FUNCTION();
@ -423,6 +418,7 @@ dp83902a_RxEvent(void)
CYGACC_CALL_IF_DELAY_US(10);
#endif
/* read header (get data size)*/
for (i = 0; i < sizeof(rcv_hdr);) {
DP_IN_DATA(dp->data, rcv_hdr[i++]);
}
@ -432,7 +428,10 @@ dp83902a_RxEvent(void)
rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
#endif
len = ((rcv_hdr[3] << 8) | rcv_hdr[2]) - sizeof(rcv_hdr);
/* data read */
uboot_push_packet_len(len);
if (rcv_hdr[1] == dp->rx_buf_start)
DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1);
else
@ -448,12 +447,12 @@ dp83902a_RxEvent(void)
efficient processing in the upper layers of the stack.
*/
static void
dp83902a_recv(unsigned char *data, int len)
dp83902a_recv(u8 *data, int len)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
cyg_uint8 *base = dp->base;
u8 *base = dp->base;
int i, mlen;
cyg_uint8 saved_char = 0;
u8 saved_char = 0;
bool saved;
#if DEBUG & 4
int dx;
@ -482,7 +481,7 @@ dp83902a_recv(unsigned char *data, int len)
if (data) {
mlen = len;
#if DEBUG & 4
printf(" sg buf %08lx len %08x \n", (unsigned long) data, mlen);
printf(" sg buf %08lx len %08x \n", (u32) data, mlen);
dx = 0;
#endif
while (0 < mlen) {
@ -495,7 +494,7 @@ dp83902a_recv(unsigned char *data, int len)
}
{
cyg_uint8 tmp;
u8 tmp;
DP_IN_DATA(dp->data, tmp);
#if DEBUG & 4
printf(" %02x", tmp);
@ -516,9 +515,9 @@ static void
dp83902a_TxEvent(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
cyg_uint8 *base = dp->base;
unsigned char tsr;
unsigned long key;
u8 *base = dp->base;
u8 tsr;
u32 key;
DEBUG_FUNCTION();
@ -551,8 +550,8 @@ static void
dp83902a_ClearCounters(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
cyg_uint8 *base = dp->base;
cyg_uint8 cnt1, cnt2, cnt3;
u8 *base = dp->base;
u8 cnt1, cnt2, cnt3;
DP_IN(base, DP_FER, cnt1);
DP_IN(base, DP_CER, cnt2);
@ -566,8 +565,8 @@ static void
dp83902a_Overflow(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *)&nic;
cyg_uint8 *base = dp->base;
cyg_uint8 isr;
u8 *base = dp->base;
u8 isr;
/* Issue a stop command and wait 1.6ms for it to complete. */
DP_OUT(base, DP_CR, DP_CR_STOP | DP_CR_NODMA);
@ -603,8 +602,8 @@ static void
dp83902a_poll(void)
{
struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
cyg_uint8 *base = dp->base;
unsigned char isr;
u8 *base = dp->base;
u8 isr;
DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0 | DP_CR_START);
DP_IN(base, DP_ISR, isr);
@ -642,13 +641,13 @@ dp83902a_poll(void)
/* find prom (taken from pc_net_cs.c from Linux) */
#include "8390.h"
/*
typedef struct hw_info_t {
u_int offset;
u_char a0, a1, a2;
u_int flags;
} hw_info_t;
*/
#define DELAY_OUTPUT 0x01
#define HAS_MISC_REG 0x02
#define USE_BIG_BUF 0x04
@ -731,102 +730,17 @@ static hw_info_t hw_info[] = {
static hw_info_t default_info = { 0, 0, 0, 0, 0 };
unsigned char dev_addr[6];
u8 dev_addr[6];
#define PCNET_CMD 0x00
#define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */
#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */
#define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */
unsigned long nic_base;
static void pcnet_reset_8390(void)
{
int i, r;
PRINTK("nic base is %lx\n", nic_base);
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
for (i = 0; i < 100; i++) {
if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
break;
PRINTK("got %x in reset\n", r);
my_udelay(100);
}
n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
if (i == 100)
printf("pcnet_reset_8390() did not complete.\n");
} /* pcnet_reset_8390 */
static hw_info_t * get_prom(void ) {
unsigned char prom[32];
int i, j;
struct {
u_char value, offset;
} program_seq[] = {
{E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
{0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
{0x00, EN0_RCNTLO}, /* Clear the count regs. */
{0x00, EN0_RCNTHI},
{0x00, EN0_IMR}, /* Mask completion irq. */
{0xFF, EN0_ISR},
{E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
{E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
{32, EN0_RCNTLO},
{0x00, EN0_RCNTHI},
{0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
{0x00, EN0_RSARHI},
{E8390_RREAD+E8390_START, E8390_CMD},
};
PRINTK("trying to get MAC via prom reading\n");
pcnet_reset_8390();
mdelay(10);
for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
n2k_outb(program_seq[i].value, program_seq[i].offset);
PRINTK("PROM:");
for (i = 0; i < 32; i++) {
prom[i] = n2k_inb(PCNET_DATAPORT);
PRINTK(" %02x", prom[i]);
}
PRINTK("\n");
for (i = 0; i < NR_INFO; i++) {
if ((prom[0] == hw_info[i].a0) &&
(prom[2] == hw_info[i].a1) &&
(prom[4] == hw_info[i].a2)) {
PRINTK("matched board %d\n", i);
break;
}
}
if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
for (j = 0; j < 6; j++)
dev_addr[j] = prom[j<<1];
PRINTK("on exit i is %d/%ld\n", i, NR_INFO);
PRINTK("MAC address is %02x:%02x:%02x:%02x:%02x:%02x\n",
dev_addr[0],dev_addr[1],dev_addr[2],dev_addr[3],dev_addr[4],dev_addr[5]);
return (i < NR_INFO) ? hw_info+i : &default_info;
}
return NULL;
}
u32 nic_base;
/* U-boot specific routines */
static unsigned char *pbuf = NULL;
static u8 *pbuf = NULL;
static int pkey = -1;
static int initialized=0;
@ -839,7 +753,7 @@ void uboot_push_packet_len(int len) {
}
dp83902a_recv(&pbuf[0], len);
/* Just pass it to the upper layer */
/*Just pass it to the upper layer*/
NetReceive(&pbuf[0], len);
}
@ -864,7 +778,7 @@ int eth_init(bd_t *bd) {
#ifdef CONFIG_DRIVER_NE2000_CCR
{
volatile unsigned char *p = (volatile unsigned char *) CONFIG_DRIVER_NE2000_CCR;
vu_char *p = (vu_char *) CONFIG_DRIVER_NE2000_CCR;
PRINTK("CCR before is %x\n", *p);
*p = CONFIG_DRIVER_NE2000_VAL;
@ -873,9 +787,9 @@ int eth_init(bd_t *bd) {
#endif
nic_base = CONFIG_DRIVER_NE2000_BASE;
nic.base = (cyg_uint8 *) CONFIG_DRIVER_NE2000_BASE;
nic.base = (u8 *) CONFIG_DRIVER_NE2000_BASE;
r = get_prom();
r = get_prom(dev_addr);
if (!r)
return -1;
@ -886,22 +800,23 @@ int eth_init(bd_t *bd) {
PRINTK("Set environment from HW MAC addr = \"%s\"\n", ethaddr);
setenv ("ethaddr", ethaddr);
#define DP_DATA 0x10
nic.data = nic.base + DP_DATA;
nic.tx_buf1 = 0x40;
nic.tx_buf2 = 0x48;
nic.rx_buf_start = 0x50;
nic.rx_buf_end = 0x80;
nic.tx_buf1 = START_PG;
nic.tx_buf2 = START_PG2;
nic.rx_buf_start = RX_START;
nic.rx_buf_end = RX_END;
if (dp83902a_init() == false)
return -1;
dp83902a_start(dev_addr);
initialized=1;
return 0;
}
void eth_halt() {
PRINTK("### eth_halt\n");
if(initialized)
dp83902a_stop();
@ -920,7 +835,7 @@ int eth_send(volatile void *packet, int length) {
pkey = -1;
dp83902a_send((unsigned char *) packet, length, 666);
dp83902a_send((u8 *) packet, length, 666);
tmo = get_timer (0) + TOUT * CFG_HZ;
while(1) {
dp83902a_poll();

308
drivers/net/ne2000.h
View File

@ -71,209 +71,113 @@ are GPL, so this is, of course, GPL.
*/
/*
------------------------------------------------------------------------
Macros for accessing DP registers
These can be overridden by the platform header
*/
* NE2000 support header file.
* Created by Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*/
#define DP_IN(_b_, _o_, _d_) (_d_) = *( (volatile unsigned char *) ((_b_)+(_o_)))
#define DP_OUT(_b_, _o_, _d_) *( (volatile unsigned char *) ((_b_)+(_o_))) = (_d_)
#ifndef __DRIVERS_NE2000_H__
#define __DRIVERS_NE2000_H__
#define DP_IN_DATA(_b_, _d_) (_d_) = *( (volatile unsigned char *) ((_b_)))
#define DP_OUT_DATA(_b_, _d_) *( (volatile unsigned char *) ((_b_))) = (_d_)
/* Enable NE2000 basic init function */
#define NE2000_BASIC_INIT
#define DP_DATA 0x10
#define START_PG 0x50 /* First page of TX buffer */
#define STOP_PG 0x80 /* Last page +1 of RX ring */
#define RX_START 0x50
#define RX_END 0x80
#define DP_IN(_b_, _o_, _d_) (_d_) = *( (vu_char *) ((_b_)+(_o_)))
#define DP_OUT(_b_, _o_, _d_) *( (vu_char *) ((_b_)+(_o_))) = (_d_)
#define DP_IN_DATA(_b_, _d_) (_d_) = *( (vu_char *) ((_b_)))
#define DP_OUT_DATA(_b_, _d_) *( (vu_char *) ((_b_))) = (_d_)
static void pcnet_reset_8390(void)
{
int i, r;
PRINTK("nic base is %lx\n", nic_base);
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
for (i = 0; i < 100; i++) {
if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
break;
PRINTK("got %x in reset\n", r);
udelay(100);
}
n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
if (i == 100)
printf("pcnet_reset_8390() did not complete.\n");
} /* pcnet_reset_8390 */
int get_prom(u8* mac_addr)
{
u8 prom[32];
int i, j;
struct {
u_char value, offset;
} program_seq[] = {
{E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
{0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
{0x00, EN0_RCNTLO}, /* Clear the count regs. */
{0x00, EN0_RCNTHI},
{0x00, EN0_IMR}, /* Mask completion irq. */
{0xFF, EN0_ISR},
{E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
{E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
{32, EN0_RCNTLO},
{0x00, EN0_RCNTHI},
{0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
{0x00, EN0_RSARHI},
{E8390_RREAD+E8390_START, E8390_CMD},
};
PRINTK("trying to get MAC via prom reading\n");
pcnet_reset_8390();
mdelay(10);
for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
n2k_outb(program_seq[i].value, program_seq[i].offset);
PRINTK("PROM:");
for (i = 0; i < 32; i++) {
prom[i] = n2k_inb(PCNET_DATAPORT);
PRINTK(" %02x", prom[i]);
}
PRINTK("\n");
for (i = 0; i < NR_INFO; i++) {
if ((prom[0] == hw_info[i].a0) &&
(prom[2] == hw_info[i].a1) &&
(prom[4] == hw_info[i].a2)) {
PRINTK("matched board %d\n", i);
break;
}
}
if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
PRINTK("on exit i is %d/%ld\n", i, NR_INFO);
PRINTK("MAC address is ");
for (j = 0; j < 6; j++){
mac_addr[j] = prom[j<<1];
PRINTK("%02x:",mac_addr[i]);
}
PRINTK("\n");
return (i < NR_INFO) ? i : 0;
}
return NULL;
}
/* here is all the data */
#define cyg_uint8 unsigned char
#define cyg_uint16 unsigned short
#define bool int
#define false 0
#define true 1
#define CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA 1
#define CYGACC_CALL_IF_DELAY_US(X) my_udelay(X)
typedef struct dp83902a_priv_data {
cyg_uint8* base;
cyg_uint8* data;
cyg_uint8* reset;
int tx_next; /* First free Tx page */
int tx_int; /* Expecting interrupt from this buffer */
int rx_next; /* First free Rx page */
int tx1, tx2; /* Page numbers for Tx buffers */
unsigned long tx1_key, tx2_key; /* Used to ack when packet sent */
int tx1_len, tx2_len;
bool tx_started, running, hardwired_esa;
cyg_uint8 esa[6];
void* plf_priv;
/* Buffer allocation */
int tx_buf1, tx_buf2;
int rx_buf_start, rx_buf_end;
} dp83902a_priv_data_t;
/*
------------------------------------------------------------------------
Some forward declarations
*/
static void dp83902a_poll(void);
/* ------------------------------------------------------------------------ */
/* Register offsets */
#define DP_CR 0x00
#define DP_CLDA0 0x01
#define DP_PSTART 0x01 /* write */
#define DP_CLDA1 0x02
#define DP_PSTOP 0x02 /* write */
#define DP_BNDRY 0x03
#define DP_TSR 0x04
#define DP_TPSR 0x04 /* write */
#define DP_NCR 0x05
#define DP_TBCL 0x05 /* write */
#define DP_FIFO 0x06
#define DP_TBCH 0x06 /* write */
#define DP_ISR 0x07
#define DP_CRDA0 0x08
#define DP_RSAL 0x08 /* write */
#define DP_CRDA1 0x09
#define DP_RSAH 0x09 /* write */
#define DP_RBCL 0x0a /* write */
#define DP_RBCH 0x0b /* write */
#define DP_RSR 0x0c
#define DP_RCR 0x0c /* write */
#define DP_FER 0x0d
#define DP_TCR 0x0d /* write */
#define DP_CER 0x0e
#define DP_DCR 0x0e /* write */
#define DP_MISSED 0x0f
#define DP_IMR 0x0f /* write */
#define DP_DATAPORT 0x10 /* "eprom" data port */
#define DP_P1_CR 0x00
#define DP_P1_PAR0 0x01
#define DP_P1_PAR1 0x02
#define DP_P1_PAR2 0x03
#define DP_P1_PAR3 0x04
#define DP_P1_PAR4 0x05
#define DP_P1_PAR5 0x06
#define DP_P1_CURP 0x07
#define DP_P1_MAR0 0x08
#define DP_P1_MAR1 0x09
#define DP_P1_MAR2 0x0a
#define DP_P1_MAR3 0x0b
#define DP_P1_MAR4 0x0c
#define DP_P1_MAR5 0x0d
#define DP_P1_MAR6 0x0e
#define DP_P1_MAR7 0x0f
#define DP_P2_CR 0x00
#define DP_P2_PSTART 0x01
#define DP_P2_CLDA0 0x01 /* write */
#define DP_P2_PSTOP 0x02
#define DP_P2_CLDA1 0x02 /* write */
#define DP_P2_RNPP 0x03
#define DP_P2_TPSR 0x04
#define DP_P2_LNPP 0x05
#define DP_P2_ACH 0x06
#define DP_P2_ACL 0x07
#define DP_P2_RCR 0x0c
#define DP_P2_TCR 0x0d
#define DP_P2_DCR 0x0e
#define DP_P2_IMR 0x0f
/* Command register - common to all pages */
#define DP_CR_STOP 0x01 /* Stop: software reset */
#define DP_CR_START 0x02 /* Start: initialize device */
#define DP_CR_TXPKT 0x04 /* Transmit packet */
#define DP_CR_RDMA 0x08 /* Read DMA (recv data from device) */
#define DP_CR_WDMA 0x10 /* Write DMA (send data to device) */
#define DP_CR_SEND 0x18 /* Send packet */
#define DP_CR_NODMA 0x20 /* Remote (or no) DMA */
#define DP_CR_PAGE0 0x00 /* Page select */
#define DP_CR_PAGE1 0x40
#define DP_CR_PAGE2 0x80
#define DP_CR_PAGEMSK 0x3F /* Used to mask out page bits */
/* Data configuration register */
#define DP_DCR_WTS 0x01 /* 1=16 bit word transfers */
#define DP_DCR_BOS 0x02 /* 1=Little Endian */
#define DP_DCR_LAS 0x04 /* 1=Single 32 bit DMA mode */
#define DP_DCR_LS 0x08 /* 1=normal mode, 0=loopback */
#define DP_DCR_ARM 0x10 /* 0=no send command (program I/O) */
#define DP_DCR_FIFO_1 0x00 /* FIFO threshold */
#define DP_DCR_FIFO_2 0x20
#define DP_DCR_FIFO_4 0x40
#define DP_DCR_FIFO_6 0x60
#define DP_DCR_INIT (DP_DCR_LS|DP_DCR_FIFO_4)
/* Interrupt status register */
#define DP_ISR_RxP 0x01 /* Packet received */
#define DP_ISR_TxP 0x02 /* Packet transmitted */
#define DP_ISR_RxE 0x04 /* Receive error */
#define DP_ISR_TxE 0x08 /* Transmit error */
#define DP_ISR_OFLW 0x10 /* Receive overflow */
#define DP_ISR_CNT 0x20 /* Tally counters need emptying */
#define DP_ISR_RDC 0x40 /* Remote DMA complete */
#define DP_ISR_RESET 0x80 /* Device has reset (shutdown, error) */
/* Interrupt mask register */
#define DP_IMR_RxP 0x01 /* Packet received */
#define DP_IMR_TxP 0x02 /* Packet transmitted */
#define DP_IMR_RxE 0x04 /* Receive error */
#define DP_IMR_TxE 0x08 /* Transmit error */
#define DP_IMR_OFLW 0x10 /* Receive overflow */
#define DP_IMR_CNT 0x20 /* Tall counters need emptying */
#define DP_IMR_RDC 0x40 /* Remote DMA complete */
#define DP_IMR_All 0x3F /* Everything but remote DMA */
/* Receiver control register */
#define DP_RCR_SEP 0x01 /* Save bad(error) packets */
#define DP_RCR_AR 0x02 /* Accept runt packets */
#define DP_RCR_AB 0x04 /* Accept broadcast packets */
#define DP_RCR_AM 0x08 /* Accept multicast packets */
#define DP_RCR_PROM 0x10 /* Promiscuous mode */
#define DP_RCR_MON 0x20 /* Monitor mode - 1=accept no packets */
/* Receiver status register */
#define DP_RSR_RxP 0x01 /* Packet received */
#define DP_RSR_CRC 0x02 /* CRC error */
#define DP_RSR_FRAME 0x04 /* Framing error */
#define DP_RSR_FO 0x08 /* FIFO overrun */
#define DP_RSR_MISS 0x10 /* Missed packet */
#define DP_RSR_PHY 0x20 /* 0=pad match, 1=mad match */
#define DP_RSR_DIS 0x40 /* Receiver disabled */
#define DP_RSR_DFR 0x80 /* Receiver processing deferred */
/* Transmitter control register */
#define DP_TCR_NOCRC 0x01 /* 1=inhibit CRC */
#define DP_TCR_NORMAL 0x00 /* Normal transmitter operation */
#define DP_TCR_LOCAL 0x02 /* Internal NIC loopback */
#define DP_TCR_INLOOP 0x04 /* Full internal loopback */
#define DP_TCR_OUTLOOP 0x08 /* External loopback */
#define DP_TCR_ATD 0x10 /* Auto transmit disable */
#define DP_TCR_OFFSET 0x20 /* Collision offset adjust */
/* Transmit status register */
#define DP_TSR_TxP 0x01 /* Packet transmitted */
#define DP_TSR_COL 0x04 /* Collision (at least one) */
#define DP_TSR_ABT 0x08 /* Aborted because of too many collisions */
#define DP_TSR_CRS 0x10 /* Lost carrier */
#define DP_TSR_FU 0x20 /* FIFO underrun */
#define DP_TSR_CDH 0x40 /* Collision Detect Heartbeat */
#define DP_TSR_OWC 0x80 /* Collision outside normal window */
#define IEEE_8023_MAX_FRAME 1518 /* Largest possible ethernet frame */
#define IEEE_8023_MIN_FRAME 64 /* Smallest possible ethernet frame */
#endif /* __DRIVERS_NE2000_H__ */

282
drivers/net/ne2000_base.h Normal file
View File

@ -0,0 +1,282 @@
/*
Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
are GPL, so this is, of course, GPL.
==========================================================================
dev/dp83902a.h
National Semiconductor DP83902a ethernet chip
==========================================================================
####ECOSGPLCOPYRIGHTBEGIN####
-------------------------------------------
This file is part of eCos, the Embedded Configurable Operating System.
Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
eCos is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 or (at your option) any later version.
eCos is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License along
with eCos; if not, write to the Free Software Foundation, Inc.,
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
As a special exception, if other files instantiate templates or use macros
or inline functions from this file, or you compile this file and link it
with other works to produce a work based on this file, this file does not
by itself cause the resulting work to be covered by the GNU General Public
License. However the source code for this file must still be made available
in accordance with section (3) of the GNU General Public License.
This exception does not invalidate any other reasons why a work based on
this file might be covered by the GNU General Public License.
Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
at http://sources.redhat.com/ecos/ecos-license/
-------------------------------------------
####ECOSGPLCOPYRIGHTEND####
####BSDCOPYRIGHTBEGIN####
-------------------------------------------
Portions of this software may have been derived from OpenBSD or other sources,
and are covered by the appropriate copyright disclaimers included herein.
-------------------------------------------
####BSDCOPYRIGHTEND####
==========================================================================
#####DESCRIPTIONBEGIN####
Author(s): gthomas
Contributors: gthomas, jskov
Date: 2001-06-13
Purpose:
Description:
####DESCRIPTIONEND####
==========================================================================
*/
/*
------------------------------------------------------------------------
Macros for accessing DP registers
These can be overridden by the platform header
*/
#define bool int
#define false 0
#define true 1
/* timeout for tx/rx in s */
#define TOUT 5
/* Ether MAC address size */
#define ETHER_ADDR_LEN 6
#define CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA 1
#define CYGACC_CALL_IF_DELAY_US(X) udelay(X)
/* H/W infomation struct */
typedef struct hw_info_t {
u32 offset;
u8 a0, a1, a2;
u32 flags;
} hw_info_t;
typedef struct dp83902a_priv_data {
u8* base;
u8* data;
u8* reset;
int tx_next; /* First free Tx page */
int tx_int; /* Expecting interrupt from this buffer */
int rx_next; /* First free Rx page */
int tx1, tx2; /* Page numbers for Tx buffers */
u32 tx1_key, tx2_key; /* Used to ack when packet sent */
int tx1_len, tx2_len;
bool tx_started, running, hardwired_esa;
u8 esa[6];
void* plf_priv;
/* Buffer allocation */
int tx_buf1, tx_buf2;
int rx_buf_start, rx_buf_end;
} dp83902a_priv_data_t;
/*
------------------------------------------------------------------------
Some forward declarations
*/
int get_prom( u8* mac_addr);
static void dp83902a_poll(void);
/* ------------------------------------------------------------------------ */
/* Register offsets */
#define DP_CR 0x00
#define DP_CLDA0 0x01
#define DP_PSTART 0x01 /* write */
#define DP_CLDA1 0x02
#define DP_PSTOP 0x02 /* write */
#define DP_BNDRY 0x03
#define DP_TSR 0x04
#define DP_TPSR 0x04 /* write */
#define DP_NCR 0x05
#define DP_TBCL 0x05 /* write */
#define DP_FIFO 0x06
#define DP_TBCH 0x06 /* write */
#define DP_ISR 0x07
#define DP_CRDA0 0x08
#define DP_RSAL 0x08 /* write */
#define DP_CRDA1 0x09
#define DP_RSAH 0x09 /* write */
#define DP_RBCL 0x0a /* write */
#define DP_RBCH 0x0b /* write */
#define DP_RSR 0x0c
#define DP_RCR 0x0c /* write */
#define DP_FER 0x0d
#define DP_TCR 0x0d /* write */
#define DP_CER 0x0e
#define DP_DCR 0x0e /* write */
#define DP_MISSED 0x0f
#define DP_IMR 0x0f /* write */
#define DP_DATAPORT 0x10 /* "eprom" data port */
#define DP_P1_CR 0x00
#define DP_P1_PAR0 0x01
#define DP_P1_PAR1 0x02
#define DP_P1_PAR2 0x03
#define DP_P1_PAR3 0x04
#define DP_P1_PAR4 0x05
#define DP_P1_PAR5 0x06
#define DP_P1_CURP 0x07
#define DP_P1_MAR0 0x08
#define DP_P1_MAR1 0x09
#define DP_P1_MAR2 0x0a
#define DP_P1_MAR3 0x0b
#define DP_P1_MAR4 0x0c
#define DP_P1_MAR5 0x0d
#define DP_P1_MAR6 0x0e
#define DP_P1_MAR7 0x0f
#define DP_P2_CR 0x00
#define DP_P2_PSTART 0x01
#define DP_P2_CLDA0 0x01 /* write */
#define DP_P2_PSTOP 0x02
#define DP_P2_CLDA1 0x02 /* write */
#define DP_P2_RNPP 0x03
#define DP_P2_TPSR 0x04
#define DP_P2_LNPP 0x05
#define DP_P2_ACH 0x06
#define DP_P2_ACL 0x07
#define DP_P2_RCR 0x0c
#define DP_P2_TCR 0x0d
#define DP_P2_DCR 0x0e
#define DP_P2_IMR 0x0f
/* Command register - common to all pages */
#define DP_CR_STOP 0x01 /* Stop: software reset */
#define DP_CR_START 0x02 /* Start: initialize device */
#define DP_CR_TXPKT 0x04 /* Transmit packet */
#define DP_CR_RDMA 0x08 /* Read DMA (recv data from device) */
#define DP_CR_WDMA 0x10 /* Write DMA (send data to device) */
#define DP_CR_SEND 0x18 /* Send packet */
#define DP_CR_NODMA 0x20 /* Remote (or no) DMA */
#define DP_CR_PAGE0 0x00 /* Page select */
#define DP_CR_PAGE1 0x40
#define DP_CR_PAGE2 0x80
#define DP_CR_PAGEMSK 0x3F /* Used to mask out page bits */
/* Data configuration register */
#define DP_DCR_WTS 0x01 /* 1=16 bit word transfers */
#define DP_DCR_BOS 0x02 /* 1=Little Endian */
#define DP_DCR_LAS 0x04 /* 1=Single 32 bit DMA mode */
#define DP_DCR_LS 0x08 /* 1=normal mode, 0=loopback */
#define DP_DCR_ARM 0x10 /* 0=no send command (program I/O) */
#define DP_DCR_FIFO_1 0x00 /* FIFO threshold */
#define DP_DCR_FIFO_2 0x20
#define DP_DCR_FIFO_4 0x40
#define DP_DCR_FIFO_6 0x60
#define DP_DCR_INIT (DP_DCR_LS|DP_DCR_FIFO_4)
/* Interrupt status register */
#define DP_ISR_RxP 0x01 /* Packet received */
#define DP_ISR_TxP 0x02 /* Packet transmitted */
#define DP_ISR_RxE 0x04 /* Receive error */
#define DP_ISR_TxE 0x08 /* Transmit error */
#define DP_ISR_OFLW 0x10 /* Receive overflow */
#define DP_ISR_CNT 0x20 /* Tally counters need emptying */
#define DP_ISR_RDC 0x40 /* Remote DMA complete */
#define DP_ISR_RESET 0x80 /* Device has reset (shutdown, error) */
/* Interrupt mask register */
#define DP_IMR_RxP 0x01 /* Packet received */
#define DP_IMR_TxP 0x02 /* Packet transmitted */
#define DP_IMR_RxE 0x04 /* Receive error */
#define DP_IMR_TxE 0x08 /* Transmit error */
#define DP_IMR_OFLW 0x10 /* Receive overflow */
#define DP_IMR_CNT 0x20 /* Tall counters need emptying */
#define DP_IMR_RDC 0x40 /* Remote DMA complete */
#define DP_IMR_All 0x3F /* Everything but remote DMA */
/* Receiver control register */
#define DP_RCR_SEP 0x01 /* Save bad(error) packets */
#define DP_RCR_AR 0x02 /* Accept runt packets */
#define DP_RCR_AB 0x04 /* Accept broadcast packets */
#define DP_RCR_AM 0x08 /* Accept multicast packets */
#define DP_RCR_PROM 0x10 /* Promiscuous mode */
#define DP_RCR_MON 0x20 /* Monitor mode - 1=accept no packets */
/* Receiver status register */
#define DP_RSR_RxP 0x01 /* Packet received */
#define DP_RSR_CRC 0x02 /* CRC error */
#define DP_RSR_FRAME 0x04 /* Framing error */
#define DP_RSR_FO 0x08 /* FIFO overrun */
#define DP_RSR_MISS 0x10 /* Missed packet */
#define DP_RSR_PHY 0x20 /* 0=pad match, 1=mad match */
#define DP_RSR_DIS 0x40 /* Receiver disabled */
#define DP_RSR_DFR 0x80 /* Receiver processing deferred */
/* Transmitter control register */
#define DP_TCR_NOCRC 0x01 /* 1=inhibit CRC */
#define DP_TCR_NORMAL 0x00 /* Normal transmitter operation */
#define DP_TCR_LOCAL 0x02 /* Internal NIC loopback */
#define DP_TCR_INLOOP 0x04 /* Full internal loopback */
#define DP_TCR_OUTLOOP 0x08 /* External loopback */
#define DP_TCR_ATD 0x10 /* Auto transmit disable */
#define DP_TCR_OFFSET 0x20 /* Collision offset adjust */
/* Transmit status register */
#define DP_TSR_TxP 0x01 /* Packet transmitted */
#define DP_TSR_COL 0x04 /* Collision (at least one) */
#define DP_TSR_ABT 0x08 /* Aborted because of too many collisions */
#define DP_TSR_CRS 0x10 /* Lost carrier */
#define DP_TSR_FU 0x20 /* FIFO underrun */
#define DP_TSR_CDH 0x40 /* Collision Detect Heartbeat */
#define DP_TSR_OWC 0x80 /* Collision outside normal window */
#define IEEE_8023_MAX_FRAME 1518 /* Largest possible ethernet frame */
#define IEEE_8023_MIN_FRAME 64 /* Smallest possible ethernet frame */