phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Blackfin: bf548-ezkit: convert to portmux framework 

Rather than bang MMRs directly, use the new portmux framework to handle
the details.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This commit is contained in:
Mike Frysinger 2010-06-02 19:29:47 -04:00
parent 032c44e0a5
commit d1f49b4364
2 changed files with 26 additions and 65 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

64
board/bf548-ezkit/bf548-ezkit.c
View File

@ -7,10 +7,12 @@
*/
#include <common.h>
#include <netdev.h>
#include <config.h>
#include <command.h>
#include <netdev.h>
#include <asm/blackfin.h>
#include <asm/gpio.h>
#include <asm/portmux.h>
#include <asm/sdh.h>
DECLARE_GLOBAL_DATA_PTR;
@ -24,53 +26,13 @@ int checkboard(void)
int board_early_init_f(void)
{
/* Port H: PH8 - PH13 == A4 - A9
* address lines of the parallel asynchronous memory interface
*/
/************************************************
* configure GPIO *
* set port H function enable register *
* configure PH8-PH13 as peripheral (not GPIO) *
*************************************************/
bfin_write_PORTH_FER(0x3F03);
/************************************************
* set port H MUX to configure PH8-PH13 *
* 1st Function (MUX = 00) (bits 16-27 == 0) *
* Set to address signals A4-A9 *
*************************************************/
bfin_write_PORTH_MUX(0);
/************************************************
* set port H direction register *
* enable PH8-PH13 as outputs *
*************************************************/
bfin_write_PORTH_DIR_SET(0x3F00);
/* Port I: PI0 - PH14 == A10 - A24
* address lines of the parallel asynchronous memory interface
*/
/************************************************
* set port I function enable register *
* configure PI0-PI14 as peripheral (not GPIO) *
*************************************************/
bfin_write_PORTI_FER(0x7fff);
/**************************************************
* set PORT I MUX to configure PI14-PI0 as *
* 1st Function (MUX=00) - address signals A10-A24 *
***************************************************/
bfin_write_PORTI_MUX(0);
/****************************************
* set PORT I direction register *
* enable PI0 - PI14 as outputs *
*****************************************/
bfin_write_PORTI_DIR_SET(0x7fff);
return 0;
/* Set async addr lines as peripheral */
const unsigned short pins[] = {
P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20,
P_A21, P_A22, P_A23, P_A24, 0
};
return peripheral_request_list(pins, "async");
}
#ifdef CONFIG_SMC911X
@ -96,9 +58,7 @@ void board_musb_init(void)
* be low for device mode and high for host mode. We set it high
* here because we are in host mode.
*/
bfin_write_PORTE_FER(bfin_read_PORTE_FER() & ~PE7);
bfin_write_PORTE_DIR_SET(PE7);
bfin_write_PORTE_SET(PE7);
SSYNC();
gpio_request(GPIO_PE7, "musb-vbus");
gpio_direction_output(GPIO_PE7, 1);
}
#endif

27
board/bf548-ezkit/video.c
View File

@ -11,6 +11,8 @@
#include <config.h>
#include <malloc.h>
#include <asm/blackfin.h>
#include <asm/gpio.h>
#include <asm/portmux.h>
#include <asm/mach-common/bits/dma.h>
#include <i2c.h>
#include <linux/types.h>
@ -173,22 +175,21 @@ void Init_DMA(void *dst)
void Init_Ports(void)
{
*pPORTF_MUX = 0x00000000;
*pPORTF_FER |= 0xFFFF; /* PPI0..15 */
*pPORTG_MUX &= ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_2_MASK | PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK);
*pPORTG_FER |= PG0 | PG1 | PG2 | PG3 | PG4; /* CLK, FS1, FS2, PPI16..17 */
const unsigned short pins[] = {
P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4,
P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, P_PPI0_D9,
P_PPI0_D10, P_PPI0_D11, P_PPI0_D12, P_PPI0_D13, P_PPI0_D14,
P_PPI0_D15, P_PPI0_D16, P_PPI0_D17,
#if !defined(CONFIG_VIDEO_RGB666)
*pPORTD_MUX &= ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_2_MASK | PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK);
*pPORTD_MUX |= (PORT_x_MUX_0_FUNC_4 | PORT_x_MUX_1_FUNC_4 | PORT_x_MUX_2_FUNC_4 | PORT_x_MUX_3_FUNC_4 | PORT_x_MUX_4_FUNC_4 | PORT_x_MUX_5_FUNC_4);
*pPORTD_FER |= PD0 | PD1 | PD2 | PD3 | PD4 | PD5; /* PPI18..23 */
P_PPI0_D18, P_PPI0_D19, P_PPI0_D20, P_PPI0_D21, P_PPI0_D22,
P_PPI0_D23,
#endif
P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, 0,
};
peripheral_request_list(pins, "lcd");
*pPORTE_FER &= ~PE3; /* DISP */
*pPORTE_DIR_SET = PE3;
*pPORTE_SET = PE3;
gpio_request(GPIO_PE3, "lcd-disp");
gpio_direction_output(GPIO_PE3, 1);
}
void EnableDMA(void)