* Patch by Rune Torgersen, 27 Feb 2004:

- Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
  - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
  - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)

* Patch by Masami Komiya, 27 Feb 2004:
  Fix rarpboot: add autoload by NFS

* Patch by Dan Eisenhut, 26 Feb 2004:
  fix flash_write return value in saveenv

* Patch by Stephan Linz, 11 Dec 2003
  expand config.mk to avoid trigraph warnings on NIOS

* Rename "BMS2003" board into "HMI10"
This commit is contained in:
wdenk 2004-03-13 23:29:43 +00:00
parent 6629d2f22b
commit c40b295682
16 changed files with 326 additions and 114 deletions

View File

@ -2,6 +2,22 @@
Changes for U-Boot 1.0.2:
======================================================================
* Patch by Rune Torgersen, 27 Feb 2004:
- Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
- Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
- Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
* Patch by Masami Komiya, 27 Feb 2004:
Fix rarpboot: add autoload by NFS
* Patch by Dan Eisenhut, 26 Feb 2004:
fix flash_write return value in saveenv
* Patch by Stephan Linz, 11 Dec 2003
expand config.mk to avoid trigraph warnings on NIOS
* Rename "BMS2003" board into "HMI10"
* SX1 patches: use "serial#" for USB serial #; use redundand environment
storage; auto-set console on USB port (using preboot command)

View File

@ -261,9 +261,6 @@ FADS860T_config: unconfig
AMX860_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx amx860 westel
bms2003_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
c2mon_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx c2mon
@ -305,6 +302,9 @@ GTH_config: unconfig
hermes_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx hermes
HMI10_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
IAD210_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens

19
README
View File

@ -670,6 +670,18 @@ The following options need to be configured:
Set this to enable ATAPI support.
- LBA48 Support
CONFIG_LBA48
Set this to enable support for disks larger than 137GB
Also look at CFG_64BIT_LBA ,CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL
Whithout these , LBA48 support uses 32bit variables and will 'only'
support disks up to 2.1TB.
CFG_64BIT_LBA:
When enabled, makes the IDE subsystem use 64bit sector addresses.
Default is 32bit.
- SCSI Support:
At the moment only there is only support for the
SYM53C8XX SCSI controller; define
@ -1713,6 +1725,13 @@ use the "saveenv" command to store a valid environment.
- CFG_FAULT_MII_ADDR:
MII address of the PHY to check for the Ethernet link state.
- CFG_64BIT_VSPRINTF:
Makes vsprintf (and all *printf functions) support printing
of 64bit values by using the L quantifier
- CFG_64BIT_STRTOUL:
Adds simple_strtoull that returns a 64bit value
Low Level (hardware related) configuration options:
---------------------------------------------------

View File

@ -425,7 +425,7 @@ static long int dram_size (long int mamr_value, long int *base, long int maxsize
#ifdef CONFIG_PS2MULT
#ifdef CONFIG_BMS2003
#ifdef CONFIG_HMI10
#define BASE_BAUD ( 1843200 / 16 )
struct serial_state rs_table[] = {
{ BASE_BAUD, 4, (void*)0xec140000 },
@ -441,12 +441,12 @@ int board_early_init_r (void)
return (0);
}
#endif
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
#endif /* CONFIG_PS2MULT */
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_BMS2003
#ifdef CONFIG_HMI10
int misc_init_r (void)
{
@ -476,5 +476,5 @@ void ide_led (uchar led, uchar status)
}
#endif
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
/* ------------------------------------------------------------------------- */

View File

@ -139,7 +139,7 @@ static block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE];
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_IDE_LED
#if !defined(CONFIG_KUP4K) && !defined(CONFIG_BMS2003)
#if !defined(CONFIG_KUP4K) && !defined(CONFIG_HMI10)
static void ide_led (uchar led, uchar status);
#else
extern void ide_led (uchar led, uchar status);
@ -180,7 +180,7 @@ static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len
#ifdef CONFIG_ATAPI
static void atapi_inquiry(block_dev_desc_t *dev_desc);
ulong atapi_read (int device, ulong blknr, ulong blkcnt, ulong *buffer);
ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer);
#endif
@ -303,11 +303,15 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (strcmp(argv[1],"read") == 0) {
ulong addr = simple_strtoul(argv[2], NULL, 16);
ulong blk = simple_strtoul(argv[3], NULL, 16);
#if CFG_64BIT_STRTOUL
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
#else
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
#endif
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
printf ("\nIDE read: device %d block # %ld, count %ld ... ",
printf ("\nIDE read: device %d block # %qd, count %ld ... ",
curr_device, blk, cnt);
n = ide_dev_desc[curr_device].block_read (curr_device,
@ -325,11 +329,15 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
} else if (strcmp(argv[1],"write") == 0) {
ulong addr = simple_strtoul(argv[2], NULL, 16);
ulong blk = simple_strtoul(argv[3], NULL, 16);
#if CFG_64BIT_STRTOUL
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
#else
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
#endif
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
printf ("\nIDE write: device %d block # %ld, count %ld ... ",
printf ("\nIDE write: device %d block # %qd, count %ld ... ",
curr_device, blk, cnt);
n = ide_write (curr_device, blk, cnt, (ulong *)addr);
@ -607,8 +615,7 @@ void ide_init (void)
ide_led ((LED_IDE1 | LED_IDE2), 0); /* LED's off */
#ifdef CONFIG_AMIGAONEG3SE
/* If this is the second bus, the first one was OK */
if (bus != 0)
{
if (bus != 0) {
ide_bus_ok[bus] = 0;
goto skip_bus;
}
@ -838,7 +845,7 @@ output_data_short(int dev, ulong *sect_buf, int words)
static void
input_swap_data(int dev, ulong *sect_buf, int words)
{
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
volatile ushort *pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
ushort *dbuf = (ushort *)sect_buf;
@ -846,7 +853,7 @@ input_swap_data(int dev, ulong *sect_buf, int words)
*dbuf++ = ld_le16(pbuf);
*dbuf++ = ld_le16(pbuf);
}
#else /* CONFIG_BMS2003 */
#else /* CONFIG_HMI10 */
uchar i;
volatile uchar *pbuf_even = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_EVEN);
volatile uchar *pbuf_odd = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
@ -859,7 +866,7 @@ input_swap_data(int dev, ulong *sect_buf, int words)
dbuf+=1;
}
}
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
}
#endif /* __LITTLE_ENDIAN || CONFIG_AU1X00 */
@ -868,7 +875,7 @@ input_swap_data(int dev, ulong *sect_buf, int words)
static void
output_data(int dev, ulong *sect_buf, int words)
{
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
ushort *dbuf;
volatile ushort *pbuf;
@ -880,7 +887,7 @@ output_data(int dev, ulong *sect_buf, int words)
__asm__ volatile ("eieio");
*pbuf = *dbuf++;
}
#else /* CONFIG_BMS2003 */
#else /* CONFIG_HMI10 */
uchar *dbuf;
volatile uchar *pbuf_even;
volatile uchar *pbuf_odd;
@ -898,7 +905,7 @@ output_data(int dev, ulong *sect_buf, int words)
__asm__ volatile ("eieio");
*pbuf_odd = *dbuf++;
}
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
}
#else /* ! __PPC__ */
static void
@ -912,7 +919,7 @@ output_data(int dev, ulong *sect_buf, int words)
static void
input_data(int dev, ulong *sect_buf, int words)
{
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
ushort *dbuf;
volatile ushort *pbuf;
@ -924,7 +931,7 @@ input_data(int dev, ulong *sect_buf, int words)
__asm__ volatile ("eieio");
*dbuf++ = *pbuf;
}
#else /* CONFIG_BMS2003 */
#else /* CONFIG_HMI10 */
uchar *dbuf;
volatile uchar *pbuf_even;
volatile uchar *pbuf_odd;
@ -942,7 +949,7 @@ input_data(int dev, ulong *sect_buf, int words)
__asm__ volatile ("eieio");
*dbuf++ = *pbuf_odd;
}
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
}
#else /* ! __PPC__ */
static void
@ -968,8 +975,7 @@ input_data_short(int dev, ulong *sect_buf, int words)
__asm__ volatile ("eieio");
}
if (words&1)
{
if (words&1) {
ushort dummy;
dummy = *pbuf;
}
@ -1023,8 +1029,7 @@ static void ide_ident (block_dev_desc_t *dev_desc)
retries = 0;
/* Warning: This will be tricky to read */
while (retries <= 1)
{
while (retries <= 1) {
#endif /* CONFIG_AMIGAONEG3SE */
/* check signature */
@ -1042,8 +1047,7 @@ static void ide_ident (block_dev_desc_t *dev_desc)
* to become ready
*/
c = ide_wait (device, ATAPI_TIME_OUT);
}
else
} else
#endif
{
/* Start Ident Command
@ -1133,6 +1137,19 @@ static void ide_ident (block_dev_desc_t *dev_desc)
/* swap shorts */
dev_desc->lba = (iop->lba_capacity << 16) | (iop->lba_capacity >> 16);
#if CONFIG_LBA48
if (iop->command_set_2 & 0x0400) { /* LBA 48 support */
dev_desc->lba48support = 1;
dev_desc->lba48 = (unsigned long long)iop->lba48_capacity[0] |
((unsigned long long)iop->lba48_capacity[1] << 16) |
((unsigned long long)iop->lba48_capacity[2] << 32) |
((unsigned long long)iop->lba48_capacity[3] << 48);
} else {
dev_desc->lba48support = 0;
dev_desc->lba48 = 0;
}
#endif /* CONFIG_LBA48 */
/* assuming HD */
dev_desc->type=DEV_TYPE_HARDDISK;
dev_desc->blksz=ATA_BLOCKSIZE;
@ -1158,13 +1175,20 @@ static void ide_ident (block_dev_desc_t *dev_desc)
/* ------------------------------------------------------------------------- */
ulong ide_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
{
ulong n = 0;
unsigned char c;
unsigned char pwrsave=0; /* power save */
#if CONFIG_LBA48
unsigned char lba48 = 0;
PRINTF ("ide_read dev %d start %lX, blocks %lX buffer at %lX\n",
if (blknr & 0x0000fffff0000000) {
/* more than 28 bits used, use 48bit mode */
lba48 = 1;
}
#endif
PRINTF ("ide_read dev %d start %qX, blocks %lX buffer at %lX\n",
device, blknr, blkcnt, (ulong)buffer);
ide_led (DEVICE_LED(device), 1); /* LED on */
@ -1208,15 +1232,33 @@ ulong ide_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
printf ("IDE read: device %d not ready\n", device);
break;
}
#if CONFIG_LBA48
if (lba48) {
/* write high bits */
ide_outb (device, ATA_SECT_CNT, 0);
ide_outb (device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
ide_outb (device, ATA_LBA_MID, (blknr >> 32) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF);
}
#endif
ide_outb (device, ATA_SECT_CNT, 1);
ide_outb (device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
ide_outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
ide_outb (device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device) |
((blknr >> 24) & 0xF) );
ide_outb (device, ATA_COMMAND, ATA_CMD_READ);
#if CONFIG_LBA48
if (lba48) {
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device) );
ide_outb (device, ATA_COMMAND, ATA_CMD_READ_EXT);
} else
#endif
{
ide_outb (device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device) |
((blknr >> 24) & 0xF) );
ide_outb (device, ATA_COMMAND, ATA_CMD_READ);
}
udelay (50);
@ -1228,8 +1270,13 @@ ulong ide_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
}
if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
printf ("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF
printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n",
device, blknr, c);
#else
printf ("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
device, (ulong)blknr, c);
#endif
break;
}
@ -1248,10 +1295,18 @@ IDE_READ_E:
/* ------------------------------------------------------------------------- */
ulong ide_write (int device, ulong blknr, ulong blkcnt, ulong *buffer)
ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
{
ulong n = 0;
unsigned char c;
#if CONFIG_LBA48
unsigned char lba48 = 0;
if (blknr & 0x0000fffff0000000) {
/* more than 28 bits used, use 48bit mode */
lba48 = 1;
}
#endif
ide_led (DEVICE_LED(device), 1); /* LED on */
@ -1267,23 +1322,46 @@ ulong ide_write (int device, ulong blknr, ulong blkcnt, ulong *buffer)
printf ("IDE read: device %d not ready\n", device);
goto WR_OUT;
}
#if CONFIG_LBA48
if (lba48) {
/* write high bits */
ide_outb (device, ATA_SECT_CNT, 0);
ide_outb (device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
ide_outb (device, ATA_LBA_MID, (blknr >> 32) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF);
}
#endif
ide_outb (device, ATA_SECT_CNT, 1);
ide_outb (device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
ide_outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
ide_outb (device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device) |
((blknr >> 24) & 0xF) );
ide_outb (device, ATA_COMMAND, ATA_CMD_WRITE);
#if CONFIG_LBA48
if (lba48) {
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device) );
ide_outb (device, ATA_COMMAND, ATA_CMD_WRITE_EXT);
} else
#endif
{
ide_outb (device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device) |
((blknr >> 24) & 0xF) );
ide_outb (device, ATA_COMMAND, ATA_CMD_WRITE);
}
udelay (50);
c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */
if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
printf ("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF
printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n",
device, blknr, c);
#else
printf ("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
device, (ulong)blknr, c);
#endif
goto WR_OUT;
}
@ -1426,7 +1504,7 @@ static void ide_reset (void)
/* ------------------------------------------------------------------------- */
#if defined(CONFIG_IDE_LED) && !defined(CONFIG_AMIGAONEG3SE) && !defined(CONFIG_KUP4K) && !defined(CONFIG_BMS2003)
#if defined(CONFIG_IDE_LED) && !defined(CONFIG_AMIGAONEG3SE) && !defined(CONFIG_KUP4K) && !defined(CONFIG_HMI10)
static uchar led_buffer = 0; /* Buffer for current LED status */
@ -1467,7 +1545,7 @@ static void ide_led (uchar led, uchar status)
static void
output_data_shorts(int dev, ushort *sect_buf, int shorts)
{
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
ushort *dbuf;
volatile ushort *pbuf;
@ -1477,7 +1555,7 @@ output_data_shorts(int dev, ushort *sect_buf, int shorts)
__asm__ volatile ("eieio");
*pbuf = *dbuf++;
}
#else /* CONFIG_BMS2003 */
#else /* CONFIG_HMI10 */
uchar *dbuf;
volatile uchar *pbuf_even;
volatile uchar *pbuf_odd;
@ -1490,13 +1568,13 @@ output_data_shorts(int dev, ushort *sect_buf, int shorts)
__asm__ volatile ("eieio");
*pbuf_odd = *dbuf++;
}
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
}
static void
input_data_shorts(int dev, ushort *sect_buf, int shorts)
{
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
ushort *dbuf;
volatile ushort *pbuf;
@ -1506,7 +1584,7 @@ input_data_shorts(int dev, ushort *sect_buf, int shorts)
__asm__ volatile ("eieio");
*dbuf++ = *pbuf;
}
#else /* CONFIG_BMS2003 */
#else /* CONFIG_HMI10 */
uchar *dbuf;
volatile uchar *pbuf_even;
volatile uchar *pbuf_odd;
@ -1519,7 +1597,7 @@ input_data_shorts(int dev, ushort *sect_buf, int shorts)
__asm__ volatile ("eieio");
*dbuf++ = *pbuf_odd;
}
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
}
#else /* ! __PPC__ */
@ -1858,6 +1936,7 @@ static void atapi_inquiry(block_dev_desc_t * dev_desc)
((unsigned long)iobuf[5]<<16) +
((unsigned long)iobuf[6]<< 8) +
((unsigned long)iobuf[7]);
dev_desc->lba48 = 0; /* ATAPI devices cannot use 48bit addressing (ATA/ATAPI v7) */
return;
}
@ -1871,7 +1950,7 @@ static void atapi_inquiry(block_dev_desc_t * dev_desc)
#define ATAPI_READ_BLOCK_SIZE 2048 /* assuming CD part */
#define ATAPI_READ_MAX_BLOCK ATAPI_READ_MAX_BYTES/ATAPI_READ_BLOCK_SIZE /* max blocks */
ulong atapi_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
{
ulong n = 0;
unsigned char ccb[12]; /* Command descriptor block */

View File

@ -160,8 +160,8 @@ int pcmcia_on (void)
}
#else
#ifdef CONFIG_BMS2003
# define BMS2003_FRAM_TIMING (PCMCIA_SHT(2) | PCMCIA_SST(2) | PCMCIA_SL(4))
#ifdef CONFIG_HMI10
# define HMI10_FRAM_TIMING (PCMCIA_SHT(2) | PCMCIA_SST(2) | PCMCIA_SL(4))
#endif
#if defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
# define CFG_PCMCIA_TIMING (PCMCIA_SHT(9) | PCMCIA_SST(3) | PCMCIA_SL(12))
@ -200,14 +200,14 @@ int pcmcia_on (void)
switch (i) {
#ifdef CONFIG_IDE_8xx_PCCARD
case 4:
#ifdef CONFIG_BMS2003
#ifdef CONFIG_HMI10
{ /* map FRAM area */
win->or = ( PCMCIA_BSIZE_256K
| PCMCIA_PPS_8
| PCMCIA_PRS_ATTR
| slotbit
| PCMCIA_PV
| BMS2003_FRAM_TIMING );
| HMI10_FRAM_TIMING );
break;
}
#endif
@ -241,7 +241,7 @@ int pcmcia_on (void)
break;
}
#endif /* CONFIG_IDE_8xx_PCCARD */
#ifdef CONFIG_BMS2003
#ifdef CONFIG_HMI10
case 3: { /* map I/O window for 4xUART data/ctrl */
win->br += 0x40000;
win->or = ( PCMCIA_BSIZE_256K
@ -252,7 +252,7 @@ int pcmcia_on (void)
| CFG_PCMCIA_TIMING );
break;
}
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
default: /* set to not valid */
win->or = 0;
break;
@ -636,7 +636,7 @@ static int hardware_enable(int slot)
PCMCIA_PGCRX(slot) = reg;
udelay(500);
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
#ifndef CONFIG_NSCU
/*
* Configure Port C pins for
@ -648,7 +648,7 @@ static int hardware_enable(int slot)
immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
#endif
#else /* CONFIG_BMS2003 */
#else /* CONFIG_HMI10 */
/*
* Configure Port B pins for
* 5 Volts Enable and 3 Volts enable
@ -657,7 +657,7 @@ static int hardware_enable(int slot)
/* remove all power */
immap->im_cpm.cp_pbdat |= 0x00000300;
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
/*
* Make sure there is a card in the slot, then configure the interface.
@ -666,11 +666,11 @@ static int hardware_enable(int slot)
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
#else
if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
printf (" No Card found\n");
return (1);
}
@ -686,25 +686,25 @@ static int hardware_enable(int slot)
(reg&PCMCIA_VS2(slot))?"n":"ff");
#ifndef CONFIG_NSCU
if ((reg & mask) == mask) {
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdat |= 0x0004;
#else
immap->im_cpm.cp_pbdat &= ~(0x0000100);
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
puts (" 5.0V card found: ");
} else {
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdat |= 0x0002;
#else
immap->im_cpm.cp_pbdat &= ~(0x0000200);
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
puts (" 3.3V card found: ");
}
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
#else
immap->im_cpm.cp_pbdir |= 0x00000300;
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
#else
if ((reg & mask) == mask) {
puts (" 5.0V card found: ");
@ -749,14 +749,14 @@ static int hardware_disable(int slot)
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
#ifndef CONFIG_NSCU
/* remove all power */
immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
#endif
#else /* CONFIG_BMS2003 */
#else /* CONFIG_HMI10 */
immap->im_cpm.cp_pbdat |= 0x00000300;
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
@ -806,7 +806,7 @@ static int voltage_set(int slot, int vcc, int vpp)
PCMCIA_PGCRX(slot) = reg;
udelay(500);
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
/*
* Configure Port C pins for
* 5 Volts Enable and 3 Volts enable,
@ -824,7 +824,7 @@ static int voltage_set(int slot, int vcc, int vpp)
case 50: reg |= 0x0004; break;
default: goto done;
}
#else /* CONFIG_BMS2003 */
#else /* CONFIG_HMI10 */
/*
* Configure Port B pins for
* 5 Volts Enable and 3 Volts enable,
@ -843,7 +843,7 @@ static int voltage_set(int slot, int vcc, int vpp)
case 50: reg |= 0x00000100; break;
default: goto done;
}
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
/* Checking supported voltages */
@ -851,21 +851,21 @@ static int voltage_set(int slot, int vcc, int vpp)
pcmp->pcmc_pipr,
(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdat |= reg;
immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
#else
immap->im_cpm.cp_pbdat &= !reg;
immap->im_cpm.cp_pbdir |= 0x00000300;
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
if (reg) {
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
debug ("PCMCIA powered at %sV\n",
(reg&0x0004) ? "5.0" : "3.3");
#else
debug ("PCMCIA powered at %sV\n",
(reg&0x00000200) ? "5.0" : "3.3");
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
} else {
debug ("PCMCIA powered down\n");
}
@ -1850,11 +1850,11 @@ static int hardware_enable (int slot)
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
#else
if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
#endif /* CONFIG_BMS2003 */
#endif /* CONFIG_HMI10 */
printf (" No Card found\n");
return (1);
}

View File

@ -207,21 +207,21 @@ int saveenv(void)
debug (" %08lX ... %08lX ...",
(ulong)&(flash_addr_new->data),
sizeof(env_ptr->data)+(ulong)&(flash_addr_new->data));
if (flash_write(env_ptr->data,
if ((rc = flash_write(env_ptr->data,
(ulong)&(flash_addr_new->data),
sizeof(env_ptr->data)) ||
sizeof(env_ptr->data))) ||
flash_write((char *)&(env_ptr->crc),
(rc = flash_write((char *)&(env_ptr->crc),
(ulong)&(flash_addr_new->crc),
sizeof(env_ptr->crc)) ||
sizeof(env_ptr->crc))) ||
flash_write((char *)&obsolete_flag,
(rc = flash_write((char *)&obsolete_flag,
(ulong)&(flash_addr->flags),
sizeof(flash_addr->flags)) ||
sizeof(flash_addr->flags))) ||
flash_write((char *)&active_flag,
(rc = flash_write((char *)&active_flag,
(ulong)&(flash_addr_new->flags),
sizeof(flash_addr_new->flags)))
sizeof(flash_addr_new->flags))))
{
flash_perror (rc);
goto Done;

View File

@ -122,6 +122,14 @@ else
CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes
endif
# avoid trigraph warnings while parsing pci.h (produced by NIOS gcc-2.9)
# this option have to be placed behind -Wall -- that's why it is here
ifeq ($(ARCH),nios)
ifeq ($(findstring 2.9,$(shell $(CC) --version)),2.9)
CFLAGS := $(CPPFLAGS) -Wno-trigraphs
endif
endif
AFLAGS_DEBUG := -Wa,-gstabs
AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS)

View File

@ -44,7 +44,11 @@
*/
void dev_print (block_dev_desc_t *dev_desc)
{
ulong lba512; /* number of blocks if 512bytes block size */
#if CONFIG_LBA48
uint64_t lba512; /* number of blocks if 512bytes block size */
#else
lbaint_t lba512;
#endif
if (dev_desc->type==DEV_TYPE_UNKNOWN) {
puts ("not available\n");
@ -82,9 +86,15 @@ void dev_print (block_dev_desc_t *dev_desc)
puts ("\n");
if ((dev_desc->lba * dev_desc->blksz)>0L) {
ulong mb, mb_quot, mb_rem, gb, gb_quot, gb_rem;
lbaint_t lba;
#if CONFIG_LBA48
if (dev_desc->lba48support)
lba = dev_desc->lba48;
else
#endif
lba = dev_desc->lba;
lba512 = (dev_desc->lba * (dev_desc->blksz/512));
lba512 = (lba * (dev_desc->blksz/512));
mb = (10 * lba512) / 2048; /* 2048 = (1024 * 1024) / 512 MB */
/* round to 1 digit */
mb_quot = mb / 10;
@ -93,12 +103,23 @@ void dev_print (block_dev_desc_t *dev_desc)
gb = mb / 1024;
gb_quot = gb / 10;
gb_rem = gb - (10 * gb_quot);
#if CONFIG_LBA48
if (dev_desc->lba48support)
printf (" Supports 48-bit addressing\n");
#endif
#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF
printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%qd x %ld)\n",
mb_quot, mb_rem,
gb_quot, gb_rem,
lba,
dev_desc->blksz);
#else
printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%ld x %ld)\n",
mb_quot, mb_rem,
gb_quot, gb_rem,
dev_desc->lba,
(ulong)lba,
dev_desc->blksz);
#endif
} else {
puts (" Capacity: not available\n");
}

View File

@ -106,6 +106,10 @@
#define ATA_CMD_SETF 0xEF /* Set Features */
#define ATA_CMD_CHK_PWR 0xE5 /* Check Power Mode */
#define ATA_CMD_READ_EXT 0x24 /* Read Sectors (with retries) with 48bit addressing */
#define ATA_CMD_WRITE_EXT 0x34 /* Write Sectores (with retries) with 48bit addressing */
#define ATA_CMD_VRFY_EXT 0x42 /* Read Verify (with retries) with 48bit addressing */
/*
* ATAPI Commands
*/
@ -192,7 +196,7 @@ typedef struct hd_driveid {
unsigned short major_rev_num; /* */
unsigned short minor_rev_num; /* */
unsigned short command_set_1; /* bits 0:Smart 1:Security 2:Removable 3:PM */
unsigned short command_set_2; /* bits 14:Smart Enabled 13:0 zero */
unsigned short command_set_2; /* bits 14:Smart Enabled 13:0 zero 10:lba48 support*/
unsigned short cfsse; /* command set-feature supported extensions */
unsigned short cfs_enable_1; /* command set-feature enabled */
unsigned short cfs_enable_2; /* command set-feature enabled */
@ -203,7 +207,10 @@ typedef struct hd_driveid {
unsigned short CurAPMvalues; /* current APM values */
unsigned short word92; /* reserved (word 92) */
unsigned short hw_config; /* hardware config */
unsigned short words94_125[32];/* reserved words 94-125 */
unsigned short words94_99[6];/* reserved words 94-99 */
//unsigned long long lba48_capacity; /* 4 16bit values containing lba 48 total number of sectors */
unsigned short lba48_capacity[4]; /* 4 16bit values containing lba 48 total number of sectors */
unsigned short words104_125[22];/* reserved words 104-125 */
unsigned short last_lun; /* reserved (word 126) */
unsigned short word127; /* reserved (word 127) */
unsigned short dlf; /* device lock function

View File

@ -459,6 +459,9 @@ int init_timebase (void);
/* lib_generic/vsprintf.c */
ulong simple_strtoul(const char *cp,char **endp,unsigned int base);
#if CFG_64BIT_VSPRINTF
unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base);
#endif
long simple_strtol(const char *cp,char **endp,unsigned int base);
void panic(const char *fmt, ...);
int sprintf(char * buf, const char *fmt, ...);

View File

@ -33,7 +33,7 @@
* (easy to change)
*/
#define CONFIG_BMS2003
#define CONFIG_HMI10
#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
#define CONFIG_TQM823L 1 /* ...on a TQM8xxL module */
@ -78,7 +78,7 @@
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/BMS/uImage\0" \
"bootfile=/tftpboot/HMI10/uImage\0" \
"kernel_addr=40040000\0" \
"ramdisk_addr=40100000\0" \
""
@ -328,7 +328,7 @@
*-----------------------------------------------------------------------
*
*/
#ifndef CONFIG_BMS2003
#ifndef CONFIG_HMI10
#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
@ -337,7 +337,7 @@
#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
#define CFG_PCMCIA_IO_ADDR (0xEC000000)
#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
#else /* CONFIG_BMS2003 */
#else /* CONFIG_HMI10 */
#define CFG_PCMCIA_MEM_ADDR (0xE0100000)
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
#define CFG_PCMCIA_DMA_ADDR (0xE4100000)

View File

@ -38,12 +38,18 @@
#endif /* CONFIG_IDE_LED */
#if CFG_64BIT_LBA
typedef uint64_t lbaint_t;
#else
typedef ulong lbaint_t;
#endif
/*
* Function Prototypes
*/
void ide_init (void);
ulong ide_read (int device, ulong blknr, ulong blkcnt, ulong *buffer);
ulong ide_write (int device, ulong blknr, ulong blkcnt, ulong *buffer);
ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer);
ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer);
#endif /* _IDE_H */

View File

@ -43,7 +43,7 @@ void status_led_tick (unsigned long timestamp);
void status_led_set (int led, int state);
/***** TQM8xxL ********************************************************/
#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_BMS2003)
#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_HMI10)
# define STATUS_LED_PAR im_cpm.cp_pbpar
# define STATUS_LED_DIR im_cpm.cp_pbdir
# define STATUS_LED_ODR im_cpm.cp_pbodr
@ -318,8 +318,8 @@ void status_led_set (int led, int state);
# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
/***** BMS2003 ********************************************************/
#elif defined(CONFIG_BMS2003)
/***** HMI10 **********************************************************/
#elif defined(CONFIG_HMI10)
# define STATUS_LED_PAR im_ioport.iop_papar
# define STATUS_LED_DIR im_ioport.iop_padir
# define STATUS_LED_ODR im_ioport.iop_paodr

View File

@ -55,6 +55,36 @@ long simple_strtol(const char *cp,char **endp,unsigned int base)
return simple_strtoul(cp,endp,base);
}
#if CFG_64BIT_STRTOUL
unsigned long long simple_strtoull (const char *cp, char **endp, unsigned int base)
{
unsigned long long result = 0, value;
if (*cp == '0') {
cp++;
if ((*cp == 'x') && isxdigit (cp[1])) {
base = 16;
cp++;
}
if (!base) {
base = 8;
}
}
if (!base) {
base = 10;
}
while (isxdigit (*cp) && (value = isdigit (*cp)
? *cp - '0'
: (islower (*cp) ? toupper (*cp) : *cp) - 'A' + 10) < base) {
result = result * base + value;
cp++;
}
if (endp)
*endp = (char *) cp;
return result;
}
#endif /* CFG_64BIT_STRTOUL */
/* we use this so that we can do without the ctype library */
#define is_digit(c) ((c) >= '0' && (c) <= '9')
@ -76,13 +106,17 @@ static int skip_atoi(const char **s)
#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */
#define do_div(n,base) ({ \
int __res; \
__res = ((unsigned long) n) % (unsigned) base; \
n = ((unsigned long) n) / (unsigned) base; \
__res; })
int __res; \
__res = ((unsigned long) n) % (unsigned) base; \
n = ((unsigned long) n) / (unsigned) base; \
__res; \
})
static char * number(char * str, long num, int base, int size, int precision
,int type)
#if CFG_64BIT_VSPRINTF
static char * number(char * str, long long num, int base, int size, int precision ,int type)
#else
static char * number(char * str, long num, int base, int size, int precision ,int type)
#endif
{
char c,sign,tmp[66];
const char *digits="0123456789abcdefghijklmnopqrstuvwxyz";
@ -154,7 +188,11 @@ int sprintf(char * buf, const char *fmt, ...);
int vsprintf(char *buf, const char *fmt, va_list args)
{
int len;
#if CFG_64BIT_VSPRINTF
unsigned long long num;
#else
unsigned long num;
#endif
int i, base;
char * str;
const char *s;
@ -164,7 +202,7 @@ int vsprintf(char *buf, const char *fmt, va_list args)
int field_width; /* width of output field */
int precision; /* min. # of digits for integers; max
number of chars for from string */
int qualifier; /* 'h', 'l', or 'L' for integer fields */
int qualifier; /* 'h', 'l', or 'q' for integer fields */
for (str=buf ; *fmt ; ++fmt) {
if (*fmt != '%') {
@ -215,7 +253,7 @@ int vsprintf(char *buf, const char *fmt, va_list args)
/* get the conversion qualifier */
qualifier = -1;
if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L') {
if (*fmt == 'h' || *fmt == 'l' || *fmt == 'q') {
qualifier = *fmt;
++fmt;
}
@ -299,6 +337,11 @@ int vsprintf(char *buf, const char *fmt, va_list args)
--fmt;
continue;
}
#if CFG_64BIT_VSPRINTF
if (qualifier == 'q') /* "quad" for 64 bit variables */
num = va_arg(args, unsigned long long);
else
#endif
if (qualifier == 'l')
num = va_arg(args, unsigned long);
else if (qualifier == 'h') {

View File

@ -24,6 +24,7 @@
#include <common.h>
#include <command.h>
#include <net.h>
#include "nfs.h"
#include "bootp.h"
#include "rarp.h"
#include "tftp.h"
@ -46,9 +47,18 @@ int RarpTry;
static void
RarpHandler(uchar * dummi0, unsigned dummi1, unsigned dummi2, unsigned dummi3)
{
char *s;
#ifdef DEBUG
printf("Got good RARP\n");
#endif
if (((s = getenv("autoload")) != NULL) && (*s == 'n')) {
NetState = NETLOOP_SUCCESS;
return;
}
else if ((s != NULL) && !strcmp(s, "NFS")) {
NfsStart();
return;
}
TftpStart ();
}