phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

EHCI fix code and ixp4xx test. 

USB ehci configuration parameter:

#define CONFIG_CMD_USB          1
#define CONFIG_USB_STORAGE      1
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_IXP4XX	1
#define CONFIG_EHCI_IS_TDI	1
#define CONFIG_EHCI_DESC_BIG_ENDIAN     1
#define CONFIG_EHCI_MMIO_BIG_ENDIAN     1
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
#define CONFIG_LEGACY_USB_INIT_SEQ      1

2 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
=> usb tree

Device Tree:
  1  Hub (1.5MBit/s, 0mA)
  |  u-boot EHCI Host Controller
  |
  |+-2  Mass Storage (12MBit/s, 100mA)
       Sony Storage Media 0C07040930296

=>

Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
This commit is contained in:
Remy Böhmer 2008-12-13 22:51:58 +01:00 committed by Remy Bohmer
parent 51ab142b8b
commit c0d722fe7e
2 changed files with 106 additions and 72 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

51
drivers/usb/usb_ehci.h
View File

@ -1,5 +1,6 @@
/*-
* Copyright (c) 2007-2008, Juniper Networks, Inc.
* Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@ -21,6 +22,10 @@
#ifndef USB_EHCI_H
#define USB_EHCI_H
#if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS)
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
#endif
/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
#define DeviceRequest \
((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)
@ -45,10 +50,12 @@ struct ehci_hccr {
#define HC_LENGTH(p) (((p) >> 0) & 0x00ff)
#define HC_VERSION(p) (((p) >> 16) & 0xffff)
uint32_t cr_hcsparams;
#define HCS_PPC(p) ((p) & (1 << 4))
#define HCS_INDICATOR(p) ((p) & (1 << 16)) /* Port indicators */
#define HCS_N_PORTS(p) (((p) >> 0) & 0xf)
uint32_t cr_hccparams;
uint8_t cr_hcsp_portrt[8];
};
} __attribute__ ((packed));
struct ehci_hcor {
uint32_t or_usbcmd;
@ -71,9 +78,9 @@ struct ehci_hcor {
uint32_t _reserved_[9];
uint32_t or_configflag;
#define FLAG_CF (1 << 0) /* true: we'll support "high speed" */
uint32_t or_portsc[2];
uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];
uint32_t or_systune;
};
} __attribute__ ((packed));
#define USBMODE 0x68 /* USB Device mode */
#define USBMODE_SDIS (1 << 3) /* Stream disable */
@ -123,26 +130,24 @@ struct usb_linux_config_descriptor {
#define cpu_to_hc32(x) cpu_to_le32((x))
#endif
#define EHCI_PS_WKOC_E 0x00400000 /* RW wake on over current */
#define EHCI_PS_WKDSCNNT_E 0x00200000 /* RW wake on disconnect */
#define EHCI_PS_WKCNNT_E 0x00100000 /* RW wake on connect */
#define EHCI_PS_PTC 0x000f0000 /* RW port test control */
#define EHCI_PS_PIC 0x0000c000 /* RW port indicator control */
#define EHCI_PS_PO 0x00002000 /* RW port owner */
#define EHCI_PS_PP 0x00001000 /* RW,RO port power */
#define EHCI_PS_LS 0x00000c00 /* RO line status */
#define EHCI_PS_PR 0x00000100 /* RW port reset */
#define EHCI_PS_SUSP 0x00000080 /* RW suspend */
#define EHCI_PS_FPR 0x00000040 /* RW force port resume */
#define EHCI_PS_OCC 0x00000020 /* RWC over current change */
#define EHCI_PS_OCA 0x00000010 /* RO over current active */
#define EHCI_PS_PEC 0x00000008 /* RWC port enable change */
#define EHCI_PS_PE 0x00000004 /* RW port enable */
#define EHCI_PS_CSC 0x00000002 /* RWC connect status change */
#define EHCI_PS_CS 0x00000001 /* RO connect status */
#define EHCI_PS_WKOC_E (1 << 22) /* RW wake on over current */
#define EHCI_PS_WKDSCNNT_E (1 << 21) /* RW wake on disconnect */
#define EHCI_PS_WKCNNT_E (1 << 20) /* RW wake on connect */
#define EHCI_PS_PO (1 << 13) /* RW port owner */
#define EHCI_PS_PP (1 << 12) /* RW,RO port power */
#define EHCI_PS_LS (3 << 10) /* RO line status */
#define EHCI_PS_PR (1 << 8) /* RW port reset */
#define EHCI_PS_SUSP (1 << 7) /* RW suspend */
#define EHCI_PS_FPR (1 << 6) /* RW force port resume */
#define EHCI_PS_OCC (1 << 5) /* RWC over current change */
#define EHCI_PS_OCA (1 << 4) /* RO over current active */
#define EHCI_PS_PEC (1 << 3) /* RWC port enable change */
#define EHCI_PS_PE (1 << 2) /* RW port enable */
#define EHCI_PS_CSC (1 << 1) /* RWC connect status change */
#define EHCI_PS_CS (1 << 0) /* RO connect status */
#define EHCI_PS_CLEAR (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC)
#define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == 0x00000400)
#define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == (1 << 10))
/*
* Schedule Interface Space.
@ -177,8 +182,8 @@ struct QH {
struct qTD qh_overlay;
};
/* Low level intit functions */
/* Low level init functions */
int ehci_hcd_init(void);
int ehci_hcd_stop(void);
#endif /* USB_EHCI_H */

127
drivers/usb/usb_ehci_core.c
View File

@ -1,6 +1,8 @@
/*-
* Copyright (c) 2007-2008, Juniper Networks, Inc.
* Copyright (c) 2008, Excito Elektronik i Skåne AB
* Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it>
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@ -18,7 +20,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#define DEBUG
#include <common.h>
#include <asm/byteorder.h>
#include <usb.h>
@ -99,6 +100,12 @@ static struct descriptor {
},
};
#if defined(CONFIG_EHCI_IS_TDI)
#define ehci_is_TDI() (1)
#else
#define ehci_is_TDI() (0)
#endif
static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int msec)
{
uint32_t result;
@ -131,17 +138,17 @@ static int ehci_reset(void)
cmd = ehci_readl(&hcor->or_usbcmd);
cmd |= CMD_RESET;
ehci_writel(&hcor->or_usbcmd, cmd);
ret = handshake(&hcor->or_usbcmd, CMD_RESET, 0, 250);
ret = handshake((uint32_t *)&hcor->or_usbcmd, CMD_RESET, 0, 250);
if (ret < 0) {
printf("EHCI fail to reset\n");
goto out;
}
#if defined CONFIG_EHCI_IS_TDI
#if defined(CONFIG_EHCI_IS_TDI)
reg_ptr = (uint32_t *)((u8 *)hcor + USBMODE);
tmp = ehci_readl(reg_ptr);
tmp |= USBMODE_CM_HC;
#if defined CONFIG_EHCI_MMIO_BIG_ENDIAN
#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN)
tmp |= USBMODE_BE;
#endif
ehci_writel(reg_ptr, tmp);
@ -427,7 +434,15 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
void *srcptr = NULL;
int len, srclen;
uint32_t reg;
uint32_t *status_reg;
if (le16_to_cpu(req->index) >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
printf("The request port(%d) is not configured\n",
le16_to_cpu(req->index) - 1);
return -1;
}
status_reg = (uint32_t *)&hcor->or_portsc[
le16_to_cpu(req->index) - 1];
srclen = 0;
debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n",
@ -506,8 +521,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
break;
case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
memset(tmpbuf, 0, 4);
reg = ehci_readl(&hcor->or_portsc[le16_to_cpu(req->index)
- 1]);
reg = ehci_readl(status_reg);
if (reg & EHCI_PS_CS)
tmpbuf[0] |= USB_PORT_STAT_CONNECTION;
if (reg & EHCI_PS_PE)
@ -516,8 +530,19 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
tmpbuf[0] |= USB_PORT_STAT_SUSPEND;
if (reg & EHCI_PS_OCA)
tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT;
if (reg & EHCI_PS_PR)
tmpbuf[0] |= USB_PORT_STAT_RESET;
if (reg & EHCI_PS_PR &&
(portreset & (1 << le16_to_cpu(req->index)))) {
int ret;
/* force reset to complete */
reg = reg & ~(EHCI_PS_PR | EHCI_PS_CLEAR);
ehci_writel(status_reg, reg);
ret = handshake(status_reg, EHCI_PS_PR, 0, 2);
if (!ret)
tmpbuf[0] |= USB_PORT_STAT_RESET;
else
printf("port(%d) reset error\n",
le16_to_cpu(req->index) - 1);
}
if (reg & EHCI_PS_PP)
tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
@ -530,73 +555,71 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
if (portreset & (1 << le16_to_cpu(req->index)))
tmpbuf[2] |= USB_PORT_STAT_C_RESET;
srcptr = tmpbuf;
srclen = 4;
break;
case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
reg = ehci_readl(&hcor->or_portsc[le16_to_cpu(req->index) - 1]);
reg = ehci_readl(status_reg);
reg &= ~EHCI_PS_CLEAR;
switch (le16_to_cpu(req->value)) {
case USB_PORT_FEAT_ENABLE:
reg |= EHCI_PS_PE;
ehci_writel(status_reg, reg);
break;
case USB_PORT_FEAT_POWER:
reg |= EHCI_PS_PP;
if (HCS_PPC(ehci_readl(&hccr->cr_hcsparams))) {
reg |= EHCI_PS_PP;
ehci_writel(status_reg, reg);
}
break;
case USB_PORT_FEAT_RESET:
debug("USB FEAT RESET\n");
if (EHCI_PS_IS_LOWSPEED(reg)) {
if ((reg & (EHCI_PS_PE | EHCI_PS_CS)) == EHCI_PS_CS &&
!ehci_is_TDI() &&
EHCI_PS_IS_LOWSPEED(reg)) {
/* Low speed device, give up ownership. */
debug("port %d low speed --> companion\n",
req->index - 1);
reg |= EHCI_PS_PO;
ehci_writel(status_reg, reg);
break;
} else {
reg |= EHCI_PS_PR;
reg &= ~EHCI_PS_PE;
ehci_writel(status_reg, reg);
/*
* caller must wait, then call GetPortStatus
* usb 2.0 specification say 50 ms resets on
* root
*/
wait_ms(50);
portreset |= 1 << le16_to_cpu(req->index);
}
/* Start reset sequence. */
reg &= ~EHCI_PS_PE;
reg |= EHCI_PS_PR;
ehci_writel(&hcor->or_portsc[
le16_to_cpu(req->index) - 1], reg);
/* Wait for reset to complete. */
wait_ms(500);
/* Terminate reset sequence. */
reg &= ~EHCI_PS_PR;
/* TODO: is it only fsl chip that requires this
* manual setting of port enable?
*/
reg |= EHCI_PS_PE;
ehci_writel(&hcor->or_portsc[
le16_to_cpu(req->index) - 1], reg);
/* Wait for HC to complete reset. */
wait_ms(10);
reg =
ehci_readl(&hcor->or_portsc[le16_to_cpu(req->index)
- 1]);
reg &= ~EHCI_PS_CLEAR;
if ((reg & EHCI_PS_PE) == 0) {
/* Not a high speed device, give up
* ownership. */
reg |= EHCI_PS_PO;
break;
}
portreset |= 1 << le16_to_cpu(req->index);
break;
default:
debug("unknown feature %x\n", le16_to_cpu(req->value));
goto unknown;
}
ehci_writel(&hcor->or_portsc[le16_to_cpu(req->index) - 1], reg);
/* unblock posted writes */
ehci_readl(&hcor->or_usbcmd);
break;
case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
reg = ehci_readl(&hcor->or_portsc[le16_to_cpu(req->index) - 1]);
reg &= ~EHCI_PS_CLEAR;
reg = ehci_readl(status_reg);
switch (le16_to_cpu(req->value)) {
case USB_PORT_FEAT_ENABLE:
reg &= ~EHCI_PS_PE;
break;
case USB_PORT_FEAT_C_ENABLE:
reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE;
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC(ehci_readl(&hccr->cr_hcsparams)))
reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP);
case USB_PORT_FEAT_C_CONNECTION:
reg |= EHCI_PS_CSC;
reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC;
break;
case USB_PORT_FEAT_OVER_CURRENT:
reg |= EHCI_PS_OCC;
reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC;
break;
case USB_PORT_FEAT_C_RESET:
portreset &= ~(1 << le16_to_cpu(req->index));
@ -605,7 +628,9 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
debug("unknown feature %x\n", le16_to_cpu(req->value));
goto unknown;
}
ehci_writel(&hcor->or_portsc[le16_to_cpu(req->index) - 1], reg);
ehci_writel(status_reg, reg);
/* unblock posted write */
ehci_readl(&hcor->or_usbcmd);
break;
default:
debug("Unknown request\n");
@ -665,9 +690,11 @@ int usb_lowlevel_init(void)
reg = ehci_readl(&hccr->cr_hcsparams);
descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
if (reg & 0x10000) /* Port Indicators */
/* Port Indicators */
if (HCS_INDICATOR(reg))
descriptor.hub.wHubCharacteristics |= 0x80;
if (reg & 0x10) /* Port Power Control */
/* Port Power Control */
if (HCS_PPC(reg))
descriptor.hub.wHubCharacteristics |= 0x01;
/* Start the host controller. */
@ -682,9 +709,11 @@ int usb_lowlevel_init(void)
cmd = ehci_readl(&hcor->or_configflag);
cmd |= FLAG_CF;
ehci_writel(&hcor->or_configflag, cmd);
/* unblock posted writes */
/* unblock posted write */
cmd = ehci_readl(&hcor->or_usbcmd);
wait_ms(5);
reg = HC_VERSION(ehci_readl(&hccr->cr_capbase));
printf("USB EHCI %x.%02x\n", reg >> 8, reg & 0xff);
rootdev = 0;