phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

ppc/85xx: Fix compile err when PCI disabled on P1_P2_RDB 

u-boot cannot be compiled after disabling CONFIG_PCI.

Place PCI related codes under #ifdef CONFIG_PCI

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Prabhakar Kushwaha 2011-01-19 10:52:04 +05:30 committed by Kumar Gala
parent 768d5b2baf
commit b707090432
3 changed files with 14 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
board/freescale/p1_p2_rdb/p1_p2_rdb.c
View File

@ -1,5 +1,5 @@
/*
* Copyright 2009-2010 Freescale Semiconductor, Inc.
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@ -222,7 +222,9 @@ void ft_board_setup(void *blob, bd_t *bd)
base = getenv_bootm_low();
size = getenv_bootm_size();
#if defined(CONFIG_PCI)
ft_pci_board_setup(blob);
#endif /* #if defined(CONFIG_PCI) */
fdt_fixup_memory(blob, (u64)base, (u64)size);
}

4
board/freescale/p1_p2_rdb/tlb.c
View File

@ -1,5 +1,5 @@
/*
* Copyright 2009 Freescale Semiconductor, Inc.
* Copyright 2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@ -58,6 +58,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
0, 2, BOOKE_PAGESZ_16M, 1),
#if defined(CONFIG_PCI)
/* *I*G* - PCI */
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_VIRT, CONFIG_SYS_PCIE2_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
@ -68,6 +69,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_256K, 1),
#endif /* #if defined(CONFIG_PCI) */
/* *I*G - NAND */
SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,

13
include/configs/P1_P2_RDB.h
View File

@ -83,17 +83,23 @@
#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/P1020/P2020,etc*/
#define CONFIG_FSL_ELBC 1 /* Enable eLBC Support */
#define CONFIG_PCI 1 /* Enable PCI/PCIE */
#if defined(CONFIG_PCI)
#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#endif /* #if defined(CONFIG_PCI) */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#if defined(CONFIG_PCI)
#define CONFIG_E1000 1 /* E1000 pci Ethernet card*/
#endif
#ifndef __ASSEMBLY__
extern unsigned long get_board_sys_clk(unsigned long dummy);
#endif
@ -364,6 +370,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
*/
/* controller 2, Slot 2, tgtid 2, Base address 9000 */
#if defined(CONFIG_PCI)
#define CONFIG_SYS_PCIE2_NAME "Slot 1"
#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
@ -385,8 +392,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc30000
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
@ -405,11 +410,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#endif /* CONFIG_PCI */
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#endif
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
#define CONFIG_TSEC1 1