diff --git a/MAINTAINERS b/MAINTAINERS
index e5ad0cfb5..45977983d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -448,6 +448,7 @@ Timur Tabi <timur@freescale.com>
 
 	MPC8349E-mITX	MPC8349
 	MPC8349E-mITX-GP MPC8349
+	P1022DS		P1022
 
 Erik Theisen <etheisen@mindspring.com>
 
diff --git a/MAKEALL b/MAKEALL
index 1a28a135f..83cee9d2a 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -410,6 +410,7 @@ LIST_85xx="		\
 	MPC8569MDS_NAND \
 	MPC8572DS	\
 	MPC8572DS_36BIT	\
+	P1022DS		\
 	P2020DS		\
 	P2020DS_36BIT	\
 	P1011RDB	\
diff --git a/Makefile b/Makefile
index ea2a3a4ea..9cea06998 100644
--- a/Makefile
+++ b/Makefile
@@ -221,6 +221,7 @@ LIBS += drivers/power/libpower.a
 LIBS += drivers/spi/libspi.a
 ifeq ($(CPU),mpc83xx)
 LIBS += drivers/qe/qe.a
+LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
 endif
 ifeq ($(CPU),mpc85xx)
 LIBS += drivers/qe/qe.a
diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c
index 42387b49e..663510987 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu.c
@@ -126,72 +126,6 @@ int checkcpu(void)
 	return 0;
 }
 
-
-/*
- * Program a UPM with the code supplied in the table.
- *
- * The 'dummy' variable is used to increment the MAD. 'dummy' is
- * supposed to be a pointer to the memory of the device being
- * programmed by the UPM.  The data in the MDR is written into
- * memory and the MAD is incremented every time there's a write
- * to 'dummy'. Unfortunately, the current prototype for this
- * function doesn't allow for passing the address of this
- * device, and changing the prototype will break a number lots
- * of other code, so we need to use a round-about way of finding
- * the value for 'dummy'.
- *
- * The value can be extracted from the base address bits of the
- * Base Register (BR) associated with the specific UPM.  To find
- * that BR, we need to scan all 8 BRs until we find the one that
- * has its MSEL bits matching the UPM we want.  Once we know the
- * right BR, we can extract the base address bits from it.
- *
- * The MxMR and the BR and OR of the chosen bank should all be
- * configured before calling this function.
- *
- * Parameters:
- * upm: 0=UPMA, 1=UPMB, 2=UPMC
- * table: Pointer to an array of values to program
- * size: Number of elements in the array.  Must be 64 or less.
- */
-void upmconfig (uint upm, uint *table, uint size)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbus = &immap->lbus;
-	volatile uchar *dummy = NULL;
-	const u32 msel = (upm + 4) << BR_MSEL_SHIFT;	/* What the MSEL field in BRn should be */
-	volatile u32 *mxmr = &lbus->mamr + upm;	/* Pointer to mamr, mbmr, or mcmr */
-	uint i;
-
-	/* Scan all the banks to determine the base address of the device */
-	for (i = 0; i < 8; i++) {
-		if ((lbus->bank[i].br & BR_MSEL) == msel) {
-			dummy = (uchar *) (lbus->bank[i].br & BR_BA);
-			break;
-		}
-	}
-
-	if (!dummy) {
-		printf("Error: %s() could not find matching BR\n", __FUNCTION__);
-		hang();
-	}
-
-	/* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
-	*mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
-
-	for (i = 0; i < size; i++) {
-		lbus->mdr = table[i];
-		__asm__ __volatile__ ("sync");
-		*dummy = 0;	/* Write the value to memory and increment MAD */
-		__asm__ __volatile__ ("sync");
-		while(((*mxmr & 0x3f) != ((i + 1) & 0x3f)));
-	}
-
-	/* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
-	*mxmr &= 0xCFFFFFC0;
-}
-
-
 int
 do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c
index f3b67ae2b..83cba9360 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c
@@ -236,8 +236,8 @@ void cpu_init_f (volatile immap_t * im)
 	/* LCRR - Clock Ratio Register (10.3.1.16)
 	 * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description
 	 */
-	clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val);
-	__raw_readl(&im->lbus.lcrr);
+	clrsetbits_be32(&im->im_lbc.lcrr, lcrr_mask, lcrr_val);
+	__raw_readl(&im->im_lbc.lcrr);
 	isync();
 
 	/* Enable Time Base & Decrementer ( so we will have udelay() )*/
@@ -267,80 +267,41 @@ void cpu_init_f (volatile immap_t * im)
 	/* Config QE ioports */
 	config_qe_ioports();
 #endif
+	/* Set up preliminary BR/OR regs */
+	init_early_memctl_regs();
 
-	/*
-	 * Memory Controller:
-	 */
-
-	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
-	 * addresses - these have to be modified later when FLASH size
-	 * has been determined
-	 */
-
-#if defined(CONFIG_SYS_BR0_PRELIM)  \
-	&& defined(CONFIG_SYS_OR0_PRELIM) \
-	&& defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \
-	&& defined(CONFIG_SYS_LBLAWAR0_PRELIM)
-	im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM;
-	im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM;
+	/* Local Access window setup */
+#if defined(CONFIG_SYS_LBLAWBAR0_PRELIM) && defined(CONFIG_SYS_LBLAWAR0_PRELIM)
 	im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM;
 	im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM;
 #else
-#error	CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined
+#error	CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined
 #endif
 
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
-	im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM;
-	im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM)
 	im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM;
 	im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
-	im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM;
-	im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
 	im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM;
 	im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
-	im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM;
-	im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM)
 	im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM;
 	im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
-	im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM;
-	im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM)
 	im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM;
 	im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
-	im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM;
-	im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM)
 	im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM;
 	im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
-	im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM;
-	im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM)
 	im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM;
 	im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
-	im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM;
-	im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM)
 	im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM;
 	im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM;
diff --git a/arch/powerpc/cpu/mpc83xx/nand_init.c b/arch/powerpc/cpu/mpc83xx/nand_init.c
index 38e141a82..d1648b781 100644
--- a/arch/powerpc/cpu/mpc83xx/nand_init.c
+++ b/arch/powerpc/cpu/mpc83xx/nand_init.c
@@ -88,8 +88,8 @@ void cpu_init_f (volatile immap_t * im)
 	&& defined(CONFIG_SYS_NAND_OR_PRELIM) \
 	&& defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \
 	&& defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM)
-	im->lbus.bank[0].br = CONFIG_SYS_NAND_BR_PRELIM;
-	im->lbus.bank[0].or = CONFIG_SYS_NAND_OR_PRELIM;
+	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
+	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
 	im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM;
 	im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM;
 #else
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index d04b19259..93e9f1c3f 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -393,7 +393,7 @@ int get_clocks(void)
 
 	lbiu_clk = csb_clk *
 	           (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
-	lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
+	lcrr = (im->im_lbc.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
 	switch (lcrr) {
 	case 2:
 	case 4:
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index f064fee26..4ee0e9af8 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -32,6 +32,7 @@ START	= start.o resetvec.o
 SOBJS-$(CONFIG_MP)	+= release.o
 SOBJS	= $(SOBJS-y)
 
+COBJS-$(CONFIG_CMD_ERRATA) += cmd_errata.o
 COBJS-$(CONFIG_CPM2)	+= commproc.o
 
 # supports ddr1
@@ -63,6 +64,7 @@ COBJS-$(CONFIG_CPM2)	+= ether_fcc.o
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
 COBJS-$(CONFIG_MP)	+= mp.o
 COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
+COBJS-$(CONFIG_P1022)	+= p1022_serdes.o
 COBJS-$(CONFIG_PCI)	+= pci.o
 COBJS-$(CONFIG_QE)	+= qe_io.o
 COBJS-$(CONFIG_CPM2)	+= serial_scc.o
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
new file mode 100644
index 000000000..d7835c8d6
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <linux/compiler.h>
+#include <asm/processor.h>
+
+static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	__maybe_unused u32 svr = get_svr();
+
+#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
+	if (IS_SVR_REV(svr, 1, 0)) {
+		switch (SVR_SOC_VER(svr)) {
+		case SVR_P1013:
+		case SVR_P1013_E:
+		case SVR_P1022:
+		case SVR_P1022_E:
+			puts("Work-around for Erratum SATA A001 enabled\n");
+		}
+	}
+#endif
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	errata, 1, 0,	do_errata,
+	"Report errata workarounds",
+	""
+);
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 6f81fdf61..fe2b52d86 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -32,6 +32,8 @@
 #include <fsl_esdhc.h>
 #include <asm/cache.h>
 #include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/fsl_law.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -93,18 +95,26 @@ int checkcpu (void)
 	minor = PVR_MIN(pvr);
 
 	printf("Core:  ");
-	switch (fam) {
-	case PVR_FAM(PVR_85xx):
-	    puts("E500");
-	    break;
-	default:
-	    puts("Unknown");
-	    break;
+	if (PVR_FAM(PVR_85xx)) {
+		switch(PVR_MEM(pvr)) {
+		case 0x1:
+		case 0x2:
+			puts("E500");
+			break;
+		case 0x3:
+			puts("E500MC");
+			break;
+		case 0x4:
+			puts("E5500");
+			break;
+		default:
+			puts("Unknown");
+			break;
+		}
+	} else {
+		puts("Unknown");
 	}
 
-	if (PVR_MEM(pvr) == 0x03)
-		puts("MC");
-
 	printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
 
 	get_sys_info(&sysinfo);
@@ -249,71 +259,6 @@ reset_85xx_watchdog(void)
 }
 #endif	/* CONFIG_WATCHDOG */
 
-/*
- * Configures a UPM. The function requires the respective MxMR to be set
- * before calling this function. "size" is the number or entries, not a sizeof.
- */
-void upmconfig (uint upm, uint * table, uint size)
-{
-	int i, mdr, mad, old_mad = 0;
-	volatile u32 *mxmr;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-	volatile u32 *brp,*orp;
-	volatile u8* dummy = NULL;
-	int upmmask;
-
-	switch (upm) {
-	case UPMA:
-		mxmr = &lbc->mamr;
-		upmmask = BR_MS_UPMA;
-		break;
-	case UPMB:
-		mxmr = &lbc->mbmr;
-		upmmask = BR_MS_UPMB;
-		break;
-	case UPMC:
-		mxmr = &lbc->mcmr;
-		upmmask = BR_MS_UPMC;
-		break;
-	default:
-		printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm);
-		hang();
-	}
-
-	/* Find the address for the dummy write transaction */
-	for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8;
-		 i++, brp += 2, orp += 2) {
-
-		/* Look for a valid BR with selected UPM */
-		if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) {
-			dummy = (volatile u8*)(in_be32(brp) & BR_BA);
-			break;
-		}
-	}
-
-	if (i == 8) {
-		printf("Error: %s() could not find matching BR\n", __FUNCTION__);
-		hang();
-	}
-
-	for (i = 0; i < size; i++) {
-		/* 1 */
-		out_be32(mxmr,  (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_WARR | i);
-		/* 2 */
-		out_be32(&lbc->mdr, table[i]);
-		/* 3 */
-		mdr = in_be32(&lbc->mdr);
-		/* 4 */
-		*(volatile u8 *)dummy = 0;
-		/* 5 */
-		do {
-			mad = in_be32(mxmr) & MxMR_MAD_MSK;
-		} while (mad <= old_mad && !(!mad && i == (size-1)));
-		old_mad = mad;
-	}
-	out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_NORM);
-}
-
 /*
  * Initializes on-chip MMC controllers.
  * to override, implement board_mmc_init()
@@ -326,3 +271,14 @@ int cpu_mmc_init(bd_t *bis)
 	return 0;
 #endif
 }
+
+/*
+ * Print out the state of various machine registers.
+ * Currently prints out LAWs, BR0/OR0, and TLBs
+ */
+void mpc85xx_reginfo(void)
+{
+	print_tlbcam();
+	print_laws();
+	print_lbc_regs();
+}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 99431dc1a..d491e2ad5 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -154,7 +154,6 @@ static void corenet_tb_init(void)
 
 void cpu_init_f (void)
 {
-	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	extern void m8560_cpm_reset (void);
 #ifdef CONFIG_MPC8548
 	ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
@@ -177,60 +176,7 @@ void cpu_init_f (void)
 	config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
 #endif
 
-	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
-	 * addresses - these have to be modified later when FLASH size
-	 * has been determined
-	 */
-#if defined(CONFIG_SYS_OR0_REMAP)
-	out_be32(&memctl->or0, CONFIG_SYS_OR0_REMAP);
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
-	out_be32(&memctl->or1, CONFIG_SYS_OR1_REMAP);
-#endif
-
-	/* now restrict to preliminary range */
-	/* if cs1 is already set via debugger, leave cs0/cs1 alone */
-	if (! memctl->br1 & 1) {
-#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
-		out_be32(&memctl->br0, CONFIG_SYS_BR0_PRELIM);
-		out_be32(&memctl->or0, CONFIG_SYS_OR0_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
-		out_be32(&memctl->or1, CONFIG_SYS_OR1_PRELIM);
-		out_be32(&memctl->br1, CONFIG_SYS_BR1_PRELIM);
-#endif
-	}
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
-	out_be32(&memctl->or2, CONFIG_SYS_OR2_PRELIM);
-	out_be32(&memctl->br2, CONFIG_SYS_BR2_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
-	out_be32(&memctl->or3, CONFIG_SYS_OR3_PRELIM);
-	out_be32(&memctl->br3, CONFIG_SYS_BR3_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
-	out_be32(&memctl->or4, CONFIG_SYS_OR4_PRELIM);
-	out_be32(&memctl->br4, CONFIG_SYS_BR4_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
-	out_be32(&memctl->or5, CONFIG_SYS_OR5_PRELIM);
-	out_be32(&memctl->br5, CONFIG_SYS_BR5_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
-	out_be32(&memctl->or6, CONFIG_SYS_OR6_PRELIM);
-	out_be32(&memctl->br6, CONFIG_SYS_BR6_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
-	out_be32(&memctl->or7, CONFIG_SYS_OR7_PRELIM);
-	out_be32(&memctl->br7, CONFIG_SYS_BR7_PRELIM);
-#endif
+       init_early_memctl_regs();
 
 #if defined(CONFIG_CPM2)
 	m8560_cpm_reset();
@@ -263,7 +209,7 @@ void cpu_init_f (void)
 int cpu_init_r(void)
 {
 #ifdef CONFIG_SYS_LBC_LCRR
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 #endif
 
 	puts ("L2:    ");
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
index 184cca4c5..8fb27abc5 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
@@ -25,7 +25,7 @@
 
 void cpu_init_f(void)
 {
-	ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	/*
 	 * LCRR - Clock Ratio Register - set up local bus timing
@@ -34,8 +34,8 @@ void cpu_init_f(void)
 	out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8);
 
 #if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM)
-	out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM);
-	out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM);
+	set_lbc_br(0, CONFIG_NAND_BR_PRELIM);
+	set_lbc_or(0, CONFIG_NAND_OR_PRELIM);
 #else
 #error  CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined
 #endif
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 1d11ab470..2628cc5f9 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -404,8 +404,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 
 #ifdef CONFIG_MP
 	ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
-#endif
 	ft_fixup_num_cores(blob);
+#endif
 
 	ft_fixup_cache(blob);
 
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index ddbc2211c..e05257cf0 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -77,6 +77,13 @@ int cpu_disable(int nr)
 
 	return 0;
 }
+
+int is_core_disabled(int nr) {
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 coredisrl = in_be32(&gur->coredisrl);
+
+	return (coredisrl & (1 << nr));
+}
 #else
 int cpu_disable(int nr)
 {
@@ -96,6 +103,22 @@ int cpu_disable(int nr)
 
 	return 0;
 }
+
+int is_core_disabled(int nr) {
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 devdisr = in_be32(&gur->devdisr);
+
+	switch (nr) {
+	case 0:
+		return (devdisr & MPC85xx_DEVDISR_CPU0);
+	case 1:
+		return (devdisr & MPC85xx_DEVDISR_CPU1);
+	default:
+		printf("Invalid cpu number for disable %d\n", nr);
+	}
+
+	return 0;
+}
 #endif
 
 static u8 boot_entry_map[4] = {
diff --git a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
new file mode 100644
index 000000000..6b0fbf200
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+#define SRDS1_MAX_LANES		4
+#define SRDS2_MAX_LANES		2
+
+static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
+	[0x00] = {NONE, NONE, NONE, NONE},
+	[0x01] = {NONE, NONE, NONE, NONE},
+	[0x02] = {NONE, NONE, NONE, NONE},
+	[0x03] = {NONE, NONE, NONE, NONE},
+	[0x04] = {NONE, NONE, NONE, NONE},
+	[0x06] = {PCIE1, PCIE3, SGMII_TSEC1, PCIE2},
+	[0x07] = {PCIE1, PCIE3, SGMII_TSEC1, PCIE2},
+	[0x09] = {PCIE1, NONE, NONE, NONE},
+	[0x0a] = {PCIE1, PCIE3, SGMII_TSEC1, SGMII_TSEC2},
+	[0x0b] = {PCIE1, PCIE3, SGMII_TSEC1, SGMII_TSEC2},
+	[0x0d] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2},
+	[0x0e] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2},
+	[0x0f] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2},
+	[0x15] = {PCIE1, PCIE3, PCIE2, PCIE2},
+	[0x16] = {PCIE1, PCIE3, PCIE2, PCIE2},
+	[0x17] = {PCIE1, PCIE3, PCIE2, PCIE2},
+	[0x18] = {PCIE1, PCIE1, PCIE2, PCIE2},
+	[0x19] = {PCIE1, PCIE1, PCIE2, PCIE2},
+	[0x1a] = {PCIE1, PCIE1, PCIE2, PCIE2},
+	[0x1b] = {PCIE1, PCIE1, PCIE2, PCIE2},
+	[0x1c] = {PCIE1, PCIE1, PCIE1, PCIE1},
+	[0x1d] = {PCIE1, PCIE1, PCIE2, PCIE2},
+	[0x1e] = {PCIE1, PCIE1, PCIE2, PCIE2},
+	[0x1f] = {PCIE1, PCIE1, PCIE2, PCIE2},
+};
+
+static const u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = {
+	[0x00] = {PCIE3, PCIE3},
+	[0x01] = {PCIE2, PCIE3},
+	[0x02] = {SATA1, SATA2},
+	[0x03] = {SGMII_TSEC1, SGMII_TSEC2},
+	[0x04] = {NONE, NONE},
+	[0x06] = {SATA1, SATA2},
+	[0x07] = {NONE, NONE},
+	[0x09] = {PCIE3, PCIE2},
+	[0x0a] = {SATA1, SATA2},
+	[0x0b] = {NONE, NONE},
+	[0x0d] = {PCIE3, PCIE2},
+	[0x0e] = {SATA1, SATA2},
+	[0x0f] = {NONE, NONE},
+	[0x15] = {SGMII_TSEC1, SGMII_TSEC2},
+	[0x16] = {SATA1, SATA2},
+	[0x17] = {NONE, NONE},
+	[0x18] = {PCIE3, PCIE3},
+	[0x19] = {SGMII_TSEC1, SGMII_TSEC2},
+	[0x1a] = {SATA1, SATA2},
+	[0x1b] = {NONE, NONE},
+	[0x1c] = {PCIE3, PCIE3},
+	[0x1d] = {SGMII_TSEC1, SGMII_TSEC2},
+	[0x1e] = {SATA1, SATA2},
+	[0x1f] = {NONE, NONE},
+};
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+	unsigned int i;
+
+	debug("%s: dev = %d\n", __FUNCTION__, device);
+	debug("PORDEVSR[IO_SEL] = 0x%x\n", srds_cfg);
+
+	if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+		printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds_cfg);
+		return 0;
+	}
+
+	for (i = 0; i < SRDS1_MAX_LANES; i++) {
+		if (serdes1_cfg_tbl[srds_cfg][i] == device)
+			return 1;
+		if (serdes2_cfg_tbl[srds_cfg][i] == device)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 8132115fc..dd4c6b3e9 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -172,10 +172,7 @@ void get_sys_info (sys_info_t * sysInfo)
 	/* We will program LCRR to this value later */
 	lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
 #else
-	{
-	    volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-	    lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
-	}
+	lcrr_div = in_be32(&(LBC_BASE_ADDR)->lcrr) & LCRR_CLKDIV;
 #endif
 	if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
 #if defined(CONFIG_FSL_CORENET)
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index b3037acea..f2833a5df 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -55,7 +55,45 @@ void init_tlbs(void)
 	return ;
 }
 
+void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
+		       phys_addr_t *rpn)
+{
+	u32 _mas1;
+
+	mtspr(MAS0, FSL_BOOKE_MAS0(1, idx, 0));
+	asm volatile("tlbre;isync");
+	_mas1 = mfspr(MAS1);
+
+	*valid = (_mas1 & MAS1_VALID);
+	*tsize = (_mas1 >> 8) & 0xf;
+	*epn = mfspr(MAS2) & MAS2_EPN;
+	*rpn = mfspr(MAS3) & MAS3_RPN;
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+	*rpn |= ((u64)mfspr(MAS7)) << 32;
+#endif
+}
+
 #ifndef CONFIG_NAND_SPL
+void print_tlbcam(void)
+{
+	int i;
+	unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
+
+	/* walk all the entries */
+	printf("TLBCAM entries\n");
+	for (i = 0; i < num_cam; i++) {
+		unsigned long epn;
+		u32 tsize, valid;
+		phys_addr_t rpn;
+
+		read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn);
+		printf("entry %02d: V: %d EPN 0x%08x RPN 0x%08llx size:",
+			i, (valid == 0) ? 0 : 1, (unsigned int)epn,
+			(unsigned long long)rpn);
+		print_size(TSIZE_TO_BYTES(tsize), "\n");
+	}
+}
+
 static inline void use_tlb_cam(u8 idx)
 {
 	int i = idx / 32;
@@ -82,15 +120,9 @@ void init_used_tlb_cams(void)
 
 	/* walk all the entries */
 	for (i = 0; i < num_cam; i++) {
-		u32 _mas1;
-
 		mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
-
 		asm volatile("tlbre;isync");
-		_mas1 = mfspr(MAS1);
-
-		/* if the entry isn't valid skip it */
-		if ((_mas1 & MAS1_VALID))
+		if (mfspr(MAS1) & MAS1_VALID)
 			use_tlb_cam(i);
 	}
 }
@@ -134,7 +166,7 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn,
 
 #ifdef CONFIG_ADDR_MAP
 	if ((tlb == 1) && (gd->flags & GD_FLG_RELOC))
-		addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel);
+		addrmap_set_entry(epn, rpn, TSIZE_TO_BYTES(tsize), esel);
 #endif
 }
 
@@ -201,26 +233,12 @@ void init_addr_map(void)
 	/* walk all the entries */
 	for (i = 0; i < num_cam; i++) {
 		unsigned long epn;
-		u32 tsize, _mas1;
+		u32 tsize, valid;
 		phys_addr_t rpn;
 
-		mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
-
-		asm volatile("tlbre;isync");
-		_mas1 = mfspr(MAS1);
-
-		/* if the entry isn't valid skip it */
-		if (!(_mas1 & MAS1_VALID))
-			continue;
-
-		tsize = (_mas1 >> 8) & 0xf;
-		epn = mfspr(MAS2) & MAS2_EPN;
-		rpn = mfspr(MAS3) & MAS3_RPN;
-#ifdef CONFIG_ENABLE_36BIT_PHYS
-		rpn |= ((phys_addr_t)mfspr(MAS7)) << 32;
-#endif
-
-		addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), i);
+		read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn);
+		if (valid & MAS1_VALID)
+			addrmap_set_entry(epn, rpn, TSIZE_TO_BYTES(tsize), i);
 	}
 
 	return ;
diff --git a/arch/powerpc/cpu/mpc86xx/cpu.c b/arch/powerpc/cpu/mpc86xx/cpu.c
index 9064e7803..4e90fd220 100644
--- a/arch/powerpc/cpu/mpc86xx/cpu.c
+++ b/arch/powerpc/cpu/mpc86xx/cpu.c
@@ -180,22 +180,9 @@ watchdog_reset(void)
  */
 void mpc86xx_reginfo(void)
 {
-	immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	ccsr_lbc_t *lbc = &immap->im_lbc;
-
 	print_bats();
 	print_laws();
-
-	printf ("Local Bus Controller Registers\n"
-		"\tBR0\t0x%08X\tOR0\t0x%08X \n", in_be32(&lbc->br0), in_be32(&lbc->or0));
-	printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", in_be32(&lbc->br1), in_be32(&lbc->or1));
-	printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", in_be32(&lbc->br2), in_be32(&lbc->or2));
-	printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", in_be32(&lbc->br3), in_be32(&lbc->or3));
-	printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", in_be32(&lbc->br4), in_be32(&lbc->or4));
-	printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", in_be32(&lbc->br5), in_be32(&lbc->or5));
-	printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", in_be32(&lbc->br6), in_be32(&lbc->or6));
-	printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7));
-
+	print_lbc_regs();
 }
 
 /*
diff --git a/arch/powerpc/cpu/mpc86xx/cpu_init.c b/arch/powerpc/cpu/mpc86xx/cpu_init.c
index b4f047d85..82c216ba5 100644
--- a/arch/powerpc/cpu/mpc86xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc86xx/cpu_init.c
@@ -46,9 +46,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void cpu_init_f(void)
 {
-	volatile immap_t    *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
-
 	/* Pointer is writable since we allocated a register for it */
 	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
@@ -61,58 +58,8 @@ void cpu_init_f(void)
 
 	setup_bats();
 
-	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
-	 * addresses - these have to be modified later when FLASH size
-	 * has been determined
-	 */
+	init_early_memctl_regs();
 
-#if defined(CONFIG_SYS_OR0_REMAP)
-	memctl->or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
-	memctl->or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-
-	/* now restrict to preliminary range */
-#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
-	memctl->br0 = CONFIG_SYS_BR0_PRELIM;
-	memctl->or0 = CONFIG_SYS_OR0_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
-	memctl->or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
-	memctl->or2 = CONFIG_SYS_OR2_PRELIM;
-	memctl->br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
-	memctl->or3 = CONFIG_SYS_OR3_PRELIM;
-	memctl->br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
-	memctl->or4 = CONFIG_SYS_OR4_PRELIM;
-	memctl->br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
-	memctl->or5 = CONFIG_SYS_OR5_PRELIM;
-	memctl->br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
-	memctl->or6 = CONFIG_SYS_OR6_PRELIM;
-	memctl->br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
-	memctl->or7 = CONFIG_SYS_OR7_PRELIM;
-	memctl->br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
 #if defined(CONFIG_FSL_DMA)
 	dma_init();
 #endif
diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c
index 51f3f4c22..ff89ee554 100644
--- a/arch/powerpc/cpu/mpc86xx/fdt.c
+++ b/arch/powerpc/cpu/mpc86xx/fdt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008,2010 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -55,6 +55,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
 	if (off < 0)
 		printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
-#endif
+
 	ft_fixup_num_cores(blob);
+#endif
 }
diff --git a/arch/powerpc/cpu/mpc86xx/mp.c b/arch/powerpc/cpu/mpc86xx/mp.c
index 24eb30aaa..30c99ebc5 100644
--- a/arch/powerpc/cpu/mpc86xx/mp.c
+++ b/arch/powerpc/cpu/mpc86xx/mp.c
@@ -66,6 +66,23 @@ int cpu_disable(int nr)
 	return 0;
 }
 
+int is_core_disabled(int nr) {
+	immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
+	ccsr_gur_t *gur = &immap->im_gur;
+	u32 devdisr = in_be32(&gur->devdisr);
+
+	switch (nr) {
+	case 0:
+		return (devdisr & MPC86xx_DEVDISR_CPU0);
+	case 1:
+		return (devdisr & MPC86xx_DEVDISR_CPU1);
+	default:
+		printf("Invalid cpu number for disable %d\n", nr);
+	}
+
+	return 0;
+}
+
 int cpu_release(int nr, int argc, char * const argv[])
 {
 	/* dummy function so common/cmd_mp.c will build
diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c
index 64a3479d7..a2d0a8ac6 100644
--- a/arch/powerpc/cpu/mpc86xx/speed.c
+++ b/arch/powerpc/cpu/mpc86xx/speed.c
@@ -97,10 +97,7 @@ void get_sys_info(sys_info_t *sysInfo)
 	/* We will program LCRR to this value later */
 	lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
 #else
-	{
-		volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-		lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
-	}
+	lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV;
 #endif
 	if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
 		sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2);
diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile
index 481f9e541..ea5122289 100644
--- a/arch/powerpc/cpu/mpc8xxx/Makefile
+++ b/arch/powerpc/cpu/mpc8xxx/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright 2009 Freescale Semiconductor, Inc.
+# Copyright 2009-2010 Freescale Semiconductor, Inc.
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License
@@ -10,9 +10,13 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib8xxx.a
 
+ifneq ($(CPU),mpc83xx)
 COBJS-y	+= cpu.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
 COBJS-$(CONFIG_PCI)	+= pci_cfg.o
+endif
+
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index ccefaf571..88c47d1ae 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  *
  * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
  * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
@@ -26,6 +26,27 @@
 #include <common.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <asm/mp.h>
+
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx))
+static int ft_del_cpuhandle(void *blob, int cpuhandle)
+{
+	int off, ret = -FDT_ERR_NOTFOUND;
+
+	/* if we find a match, we'll delete at it which point the offsets are
+	 * invalid so we start over from the beginning
+	 */
+	off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle",
+						&cpuhandle, 4);
+	while (off != -FDT_ERR_NOTFOUND) {
+		fdt_delprop(blob, off, "cpu-handle");
+		ret = 1;
+		off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle",
+				&cpuhandle, 4);
+	}
+
+	return ret;
+}
 
 void ft_fixup_num_cores(void *blob) {
 	int off, num_cores, del_cores;
@@ -37,13 +58,18 @@ void ft_fixup_num_cores(void *blob) {
 	while (off != -FDT_ERR_NOTFOUND) {
 		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
 
-		/* if we find a cpu node outside of what we expect delete it
-		 * and reset the offset back to the start since we can't
-		 * trust the offsets anymore
-		 */
-		if (*reg > num_cores-1) {
-			fdt_del_node(blob, off);
-			del_cores++;
+		if ((*reg > num_cores-1) || (is_core_disabled(*reg))) {
+			int ph = fdt_get_phandle(blob, off);
+
+			/* Delete the cpu node once there are no cpu handles */
+			if (-FDT_ERR_NOTFOUND == ft_del_cpuhandle(blob, ph)) {
+				fdt_del_node(blob, off);
+				del_cores++;
+			}
+			/* either we deleted some cpu handles or the cpu node
+			 * so we reset the offset back to the start since we
+			 * can't trust the offsets anymore
+			 */
 			off = -1;
 		}
 		off = fdt_node_offset_by_prop_value(blob, off,
@@ -53,3 +79,139 @@ void ft_fixup_num_cores(void *blob) {
 	debug ("deleted %d extra core entry entries from device tree\n",
 								del_cores);
 }
+#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+void fdt_fixup_dr_usb(void *blob, bd_t *bd)
+{
+	char *mode;
+	char *type;
+	const char *compat = "fsl-usb2-dr";
+	const char *prop_mode = "dr_mode";
+	const char *prop_type = "phy_type";
+	int node_offset;
+	int err;
+
+	mode = getenv("usb_dr_mode");
+	type = getenv("usb_phy_type");
+	if (!mode && !type)
+		return;
+
+	node_offset = fdt_node_offset_by_compatible(blob, 0, compat);
+	if (node_offset < 0) {
+		printf("WARNING: could not find compatible node %s: %s.\n",
+			compat, fdt_strerror(node_offset));
+		return;
+	}
+
+	if (mode) {
+		err = fdt_setprop(blob, node_offset, prop_mode, mode,
+				  strlen(mode) + 1);
+		if (err < 0)
+			printf("WARNING: could not set %s for %s: %s.\n",
+			       prop_mode, compat, fdt_strerror(err));
+	}
+
+	if (type) {
+		err = fdt_setprop(blob, node_offset, prop_type, type,
+				  strlen(type) + 1);
+		if (err < 0)
+			printf("WARNING: could not set %s for %s: %s.\n",
+			       prop_type, compat, fdt_strerror(err));
+	}
+}
+#endif /* CONFIG_HAS_FSL_DR_USB */
+
+/*
+ * update crypto node properties to a specified revision of the SEC
+ * called with sec_rev == 0 if not on an E processor
+ */
+#if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+	const struct sec_rev_prop {
+		u32 sec_rev;
+		u32 num_channels;
+		u32 channel_fifo_len;
+		u32 exec_units_mask;
+		u32 descriptor_types_mask;
+	} sec_rev_prop_list [] = {
+		{ 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */
+		{ 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */
+		{ 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */
+		{ 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */
+		{ 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */
+		{ 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
+		{ 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
+	};
+	char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
+			    sizeof("fsl,secX.Y")];
+	int crypto_node, sec_idx, err;
+	char *p;
+	u32 val;
+
+	/* locate crypto node based on lowest common compatible */
+	crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0");
+	if (crypto_node == -FDT_ERR_NOTFOUND)
+		return;
+
+	/* delete it if not on an E-processor */
+	if (crypto_node > 0 && !sec_rev) {
+		fdt_del_node(blob, crypto_node);
+		return;
+	}
+
+	/* else we got called for possible uprev */
+	for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++)
+		if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev)
+			break;
+
+	if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) {
+		puts("warning: unknown SEC revision number\n");
+		return;
+	}
+
+	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels);
+	err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+
+	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask);
+	err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+
+	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask);
+	err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+
+	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len);
+	err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+
+	val = 0;
+	while (sec_idx >= 0) {
+		p = compat_strlist + val;
+		val += sprintf(p, "fsl,sec%d.%d",
+			(sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8,
+			sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1;
+		sec_idx--;
+	}
+	err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+}
+#elif CONFIG_SYS_FSL_SEC_COMPAT >= 4  /* SEC4 */
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+	if (!sec_rev)
+		fdt_del_node_and_alias(blob, "crypto");
+}
+#endif
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
new file mode 100644
index 000000000..fcef40c5b
--- /dev/null
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_lbc.h>
+
+void print_lbc_regs(void)
+{
+	int i;
+
+	printf("\nLocal Bus Controller Registers\n");
+	for (i = 0; i < 8; i++) {
+		printf("BR%d\t0x%08X\tOR%d\t0x%08X\n",
+		       i, get_lbc_br(i), i, get_lbc_or(i));
+	}
+}
+
+void init_early_memctl_regs(void)
+{
+	uint init_br1 = 1;
+
+#ifdef CONFIG_MPC85xx
+	/* if cs1 is already set via debugger, leave cs0/cs1 alone */
+	if (get_lbc_br(1) & BR_V)
+		init_br1 = 0;
+#endif
+
+	/*
+	 * Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
+	 * preliminary addresses - these have to be modified later
+	 * when FLASH size has been determined
+	 */
+#if defined(CONFIG_SYS_OR0_REMAP)
+	set_lbc_or(0, CONFIG_SYS_OR0_REMAP);
+#endif
+#if defined(CONFIG_SYS_OR1_REMAP)
+	set_lbc_or(1, CONFIG_SYS_OR1_REMAP);
+#endif
+	/* now restrict to preliminary range */
+	if (init_br1) {
+		set_lbc_br(0, CONFIG_SYS_BR0_PRELIM);
+		set_lbc_or(0, CONFIG_SYS_OR0_PRELIM);
+
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+		set_lbc_or(1, CONFIG_SYS_OR1_PRELIM);
+		set_lbc_br(1, CONFIG_SYS_BR1_PRELIM);
+#endif
+	}
+
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+	set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
+	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+	set_lbc_or(4, CONFIG_SYS_OR4_PRELIM);
+	set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+	set_lbc_or(5, CONFIG_SYS_OR5_PRELIM);
+	set_lbc_br(5, CONFIG_SYS_BR5_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+	set_lbc_or(6, CONFIG_SYS_OR6_PRELIM);
+	set_lbc_br(6, CONFIG_SYS_BR6_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+	set_lbc_or(7, CONFIG_SYS_OR7_PRELIM);
+	set_lbc_br(7, CONFIG_SYS_BR7_PRELIM);
+#endif
+}
+
+/*
+ * Configures a UPM. The function requires the respective MxMR to be set
+ * before calling this function. "size" is the number or entries, not a sizeof.
+ */
+void upmconfig(uint upm, uint *table, uint size)
+{
+	fsl_lbc_t *lbc = LBC_BASE_ADDR;
+	int i, mdr, mad, old_mad = 0;
+	u32 mask = (~MxMR_OP_MSK & ~MxMR_MAD_MSK);
+	u32 msel = BR_UPMx_TO_MSEL(upm);
+	u32 *mxmr = &lbc->mamr + upm;
+	volatile u8 *dummy = NULL;
+
+	if (upm < UPMA || upm > UPMC) {
+		printf("Error: %s() Bad UPM index %d\n", __func__, upm);
+		hang();
+	}
+
+	/*
+	 * Find the address for the dummy write - scan all of the BRs until we
+	 * find one matching the UPM and extract the base address bits from it.
+	 */
+	for (i = 0; i < 8; i++) {
+		if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | msel)) {
+			dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA);
+			break;
+		}
+	}
+
+	if (!dummy) {
+		printf("Error: %s() No matching BR\n", __func__);
+		hang();
+	}
+
+	/* Program UPM using steps outlined by the reference manual */
+	for (i = 0; i < size; i++) {
+		out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_WARR | i);
+		out_be32(&lbc->mdr, table[i]);
+		mdr = in_be32(&lbc->mdr);
+		*dummy = 0;
+		do {
+			mad = in_be32(mxmr) & MxMR_MAD_MSK;
+		} while (mad <= old_mad && !(!mad && i == (size-1)));
+		old_mad = mad;
+	}
+
+	/* Return to normal operation */
+	out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_NORM);
+}
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index fc3facb30..d88c282f7 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -66,6 +66,15 @@
 #define CONFIG_TSECV2
 #endif
 
+/*
+ * SEC (crypto unit) major compatible version determination
+ */
+#if defined(CONFIG_FSL_CORENET)
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#elif defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx)
+#define CONFIG_SYS_FSL_SEC_COMPAT	2
+#endif
+
 /* Number of TLB CAM entries we have on FSL Book-E chips */
 #if defined(CONFIG_E500MC)
 #define CONFIG_SYS_NUM_TLBCAMS	64
@@ -76,4 +85,10 @@
 /* Relocation to SDRAM works on all PPC boards */
 #define CONFIG_RELOC_FIXUP_WORKS
 
+/* Since so many PPC SOCs have a semi-common LBC, define this here */
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
+	defined(CONFIG_MPC83xx)
+#define CONFIG_FSL_LBC
+#endif
+
 #endif /* _ASM_CONFIG_H_ */
diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h
index 34c56a259..12ba1a6a0 100644
--- a/arch/powerpc/include/asm/fsl_law.h
+++ b/arch/powerpc/include/asm/fsl_law.h
@@ -47,6 +47,7 @@ enum law_size {
 };
 
 #define law_size_bits(sz)	(__ilog2_u64(sz) - 1)
+#define lawar_size(x)	(1ULL << ((x & 0x3f) + 1))
 
 #ifdef CONFIG_FSL_CORENET
 enum law_trgt_if {
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 03ae6a765..82d24ab13 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -14,6 +14,7 @@
 #define __ASM_PPC_FSL_LBC_H
 
 #include <config.h>
+#include <common.h>
 
 /* BR - Base Registers
  */
@@ -61,6 +62,8 @@
 #define BR_V				0x00000001
 #define BR_V_SHIFT			0
 
+#define BR_UPMx_TO_MSEL(x)		((x + 4) << BR_MSEL_SHIFT)
+
 #define UPMA			0
 #define UPMB			1
 #define UPMC			2
@@ -453,49 +456,70 @@
 #define LTESR_CC               0x00000001
 
 #ifndef __ASSEMBLY__
-/*
- * Local Bus Controller Registers.
- */
-typedef struct lbus_bank {
-	u32 br;                 /* Base Register */
-	u32 or;                 /* Option Register */
-} lbus_bank_t;
+#include <asm/io.h>
+
+extern void print_lbc_regs(void);
+extern void init_early_memctl_regs(void);
+extern void upmconfig(uint upm, uint *table, uint size);
+
+#define LBC_BASE_ADDR ((fsl_lbc_t *)CONFIG_SYS_LBC_ADDR)
+#define get_lbc_br(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].br))
+#define get_lbc_or(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].or))
+#define set_lbc_br(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].br, v))
+#define set_lbc_or(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].or, v))
+
+typedef struct lbc_bank {
+	u32     br;
+	u32     or;
+} lbc_bank_t;
+
+/* Local Bus Controller Registers */
+typedef struct fsl_lbc {
+	lbc_bank_t      bank[8];
+	u8	res1[40];
+	u32     mar;            /* LBC UPM Addr */
+	u8      res2[4];
+	u32     mamr;           /* LBC UPMA Mode */
+	u32     mbmr;           /* LBC UPMB Mode */
+	u32     mcmr;           /* LBC UPMC Mode */
+	u8      res3[8];
+	u32     mrtpr;          /* LBC Memory Refresh Timer Prescaler */
+	u32     mdr;            /* LBC UPM Data */
+#ifdef CONFIG_FSL_ELBC
+	u8      res4[4];
+	u32     lsor;
+	u8      res5[12];
+	u32     lurt;           /* LBC UPM Refresh Timer */
+	u8	res6[4];
+#else
+	u8	res4[8];
+	u32     lsdmr;          /* LBC SDRAM Mode */
+	u8	res5[8];
+	u32     lurt;           /* LBC UPM Refresh Timer */
+	u32     lsrt;           /* LBC SDRAM Refresh Timer */
+#endif
+	u8      res7[8];
+	u32     ltesr;          /* LBC Transfer Error Status */
+	u32     ltedr;          /* LBC Transfer Error Disable */
+	u32     lteir;          /* LBC Transfer Error IRQ */
+	u32     lteatr;         /* LBC Transfer Error Attrs */
+	u32     ltear;          /* LBC Transfer Error Addr */
+	u8      res8[12];
+	u32     lbcr;           /* LBC Configuration */
+	u32     lcrr;           /* LBC Clock Ratio */
+#ifdef CONFIG_NAND_FSL_ELBC
+	u8	res9[0x8];
+	u32     fmr;            /* Flash Mode Register */
+	u32     fir;            /* Flash Instruction Register */
+	u32     fcr;            /* Flash Command Register */
+	u32     fbar;           /* Flash Block Addr Register */
+	u32     fpar;           /* Flash Page Addr Register */
+	u32     fbcr;           /* Flash Byte Count Register */
+	u8      res10[0xF08];
+#else
+	u8      res9[0xF28];
+#endif
+} fsl_lbc_t;
 
-typedef struct fsl_lbus {
-	lbus_bank_t bank[8];
-	u8 res0[0x28];
-	u32 mar;                /* UPM Address Register */
-	u8 res1[0x4];
-	u32 mamr;               /* UPMA Mode Register */
-	u32 mbmr;               /* UPMB Mode Register */
-	u32 mcmr;               /* UPMC Mode Register */
-	u8 res2[0x8];
-	u32 mrtpr;              /* Memory Refresh Timer Prescaler Register */
-	u32 mdr;                /* UPM Data Register */
-	u8 res3[0x4];
-	u32 lsor;               /* Special Operation Initiation Register */
-	u32 lsdmr;              /* SDRAM Mode Register */
-	u8 res4[0x8];
-	u32 lurt;               /* UPM Refresh Timer */
-	u32 lsrt;               /* SDRAM Refresh Timer */
-	u8 res5[0x8];
-	u32 ltesr;              /* Transfer Error Status Register */
-	u32 ltedr;              /* Transfer Error Disable Register */
-	u32 lteir;              /* Transfer Error Interrupt Register */
-	u32 lteatr;             /* Transfer Error Attributes Register */
-	u32 ltear;               /* Transfer Error Address Register */
-	u8 res6[0xC];
-	u32 lbcr;               /* Configuration Register */
-	u32 lcrr;               /* Clock Ratio Register */
-	u8 res7[0x8];
-	u32 fmr;                /* Flash Mode Register */
-	u32 fir;                /* Flash Instruction Register */
-	u32 fcr;                /* Flash Command Register */
-	u32 fbar;               /* Flash Block Addr Register */
-	u32 fpar;               /* Flash Page Addr Register */
-	u32 fbcr;               /* Flash Byte Count Register */
-	u8 res8[0xF08];
-} fsl_lbus_t;
 #endif /* __ASSEMBLY__ */
-
 #endif /* __ASM_PPC_FSL_LBC_H */
diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h
index db61e7e9c..bb875435d 100644
--- a/arch/powerpc/include/asm/fsl_pci.h
+++ b/arch/powerpc/include/asm/fsl_pci.h
@@ -162,14 +162,15 @@ typedef struct ccsr_pci {
 } ccsr_fsl_pci_t;
 
 struct fsl_pci_info {
-	unsigned long	regs;
-	pci_addr_t	mem_bus;
-	phys_size_t	mem_phys;
-	pci_size_t	mem_size;
-	pci_addr_t	io_bus;
-	phys_size_t	io_phys;
-	pci_size_t	io_size;
-	int		pci_num;
+	unsigned long regs;
+	pci_addr_t mem_bus;
+	phys_size_t mem_phys;
+	pci_size_t mem_size;
+	pci_addr_t io_bus;
+	phys_size_t io_phys;
+	pci_size_t io_size;
+	enum law_trgt_if law;
+	int pci_num;
 };
 
 int fsl_pci_init_port(struct fsl_pci_info *pci_info,
@@ -184,6 +185,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info,
 	x.io_bus = CONFIG_SYS_PCI##num##_IO_BUS; \
 	x.io_phys = CONFIG_SYS_PCI##num##_IO_PHYS; \
 	x.io_size = CONFIG_SYS_PCI##num##_IO_SIZE; \
+	x.law = LAW_TRGT_IF_PCI_##num; \
 	x.pci_num = num; \
 }
 
@@ -196,6 +198,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info,
 	x.io_bus = CONFIG_SYS_PCIE##num##_IO_BUS; \
 	x.io_phys = CONFIG_SYS_PCIE##num##_IO_PHYS; \
 	x.io_size = CONFIG_SYS_PCIE##num##_IO_SIZE; \
+	x.law = LAW_TRGT_IF_PCIE_##num; \
 	x.pci_num = num; \
 }
 
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index 3a9cdc4f8..cc0293acd 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -646,7 +646,7 @@ typedef struct immap {
 	u8			res2[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res3[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res4[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -686,7 +686,7 @@ typedef struct immap {
 	u8			res1[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res3[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -721,7 +721,7 @@ typedef struct immap {
 	u8			res1[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res3[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -766,7 +766,7 @@ typedef struct immap {
 	u8			res1[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res3[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -816,7 +816,7 @@ typedef struct immap {
 	u8			res4[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res5[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res6[0x2000];
 	dma83xx_t		dma;		/* DMA */
 	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
@@ -855,7 +855,7 @@ typedef struct immap {
 	u8			res3[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res4[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res5[0x2000];
 	dma83xx_t		dma;		/* DMA */
 	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
@@ -879,6 +879,7 @@ typedef struct immap {
 #endif
 #define CONFIG_SYS_MPC83xx_USB_ADDR \
 			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET)
+#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)
 
 #define CONFIG_SYS_TSEC1_OFFSET		0x24000
 #define CONFIG_SYS_MDIO1_OFFSET		0x24000
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 5b205d1c2..4e665d399 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -266,50 +266,6 @@ typedef struct ccsr_duart {
 } ccsr_duart_t;
 #endif
 
-/* Local Bus Controller Registers */
-typedef struct ccsr_lbc {
-	u32	br0;		/* LBC Base 0 */
-	u32	or0;		/* LBC Options 0 */
-	u32	br1;		/* LBC Base 1 */
-	u32	or1;		/* LBC Options 1 */
-	u32	br2;		/* LBC Base 2 */
-	u32	or2;		/* LBC Options 2 */
-	u32	br3;		/* LBC Base 3 */
-	u32	or3;		/* LBC Options 3 */
-	u32	br4;		/* LBC Base 4 */
-	u32	or4;		/* LBC Options 4 */
-	u32	br5;		/* LBC Base 5 */
-	u32	or5;		/* LBC Options 5 */
-	u32	br6;		/* LBC Base 6 */
-	u32	or6;		/* LBC Options 6 */
-	u32	br7;		/* LBC Base 7 */
-	u32	or7;		/* LBC Options 7 */
-	u8	res1[40];
-	u32	mar;		/* LBC UPM Addr */
-	u8	res2[4];
-	u32	mamr;		/* LBC UPMA Mode */
-	u32	mbmr;		/* LBC UPMB Mode */
-	u32	mcmr;		/* LBC UPMC Mode */
-	u8	res3[8];
-	u32	mrtpr;		/* LBC Memory Refresh Timer Prescaler */
-	u32	mdr;		/* LBC UPM Data */
-	u8	res4[8];
-	u32	lsdmr;		/* LBC SDRAM Mode */
-	u8	res5[8];
-	u32	lurt;		/* LBC UPM Refresh Timer */
-	u32	lsrt;		/* LBC SDRAM Refresh Timer */
-	u8	res6[8];
-	u32	ltesr;		/* LBC Transfer Error Status */
-	u32	ltedr;		/* LBC Transfer Error Disable */
-	u32	lteir;		/* LBC Transfer Error IRQ */
-	u32	lteatr;		/* LBC Transfer Error Attrs */
-	u32	ltear;		/* LBC Transfer Error Addr */
-	u8	res7[12];
-	u32	lbcr;		/* LBC Configuration */
-	u32	lcrr;		/* LBC Clock Ratio */
-	u8	res8[3880];
-} ccsr_lbc_t;
-
 /* eSPI Registers */
 typedef struct ccsr_espi {
 	u32	mode;		/* eSPI mode */
@@ -2045,6 +2001,41 @@ enum {
 	FSL_SRDS_B3_LANE_D = 23,
 };
 
+/* Security Engine Block (MS = Most Sig., LS = Least Sig.) */
+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+typedef struct ccsr_sec {
+	u8	res1[0xfa0];
+	u32	crnr_ms;	/* CHA Revision Number Register, MS */
+	u32	crnr_ls;	/* CHA Revision Number Register, LS */
+	u32	ctpr_ms;	/* Compile Time Parameters Register, MS */
+#define SEC_CTPR_MS_AXI_LIODN		0x08000000
+#define SEC_CTPR_MS_QI			0x02000000
+	u32	ctpr_ls;	/* Compile Time Parameters Register, LS */
+	u8	res2[0x10];
+	u32	far_ms;		/* Fault Address Register, MS */
+	u32	far_ls;		/* Fault Address Register, LS */
+	u32	falr;		/* Fault Address LIODN Register */
+	u32	fadr;		/* Fault Address Detail Register */
+	u8	res3[0x4];
+	u32	csta;		/* CAAM Status Register */
+	u8	res4[0x8];
+	u32	rvid;		/* Run Time Integrity Checking Version ID Reg.*/
+#define SEC_RVID_MA			0x0f000000
+	u32	ccbvid;		/* CHA Cluster Block Version ID Register */
+	u32	chavid_ms;	/* CHA Version ID Register, MS */
+	u32	chavid_ls;	/* CHA Version ID Register, LS */
+	u32	chanum_ms;	/* CHA Number Register, MS */
+#define SEC_CHANUM_MS_JQNUM_MASK	0xf0000000
+#define SEC_CHANUM_MS_JQNUM_SHIFT	28
+#define SEC_CHANUM_MS_DECONUM_MASK	0x0f000000
+#define SEC_CHANUM_MS_DECONUM_SHIFT	24
+	u32	chanum_ls;	/* CHA Number Register, LS */
+	u32	caamvid_ms;	/* CAAM Version ID Register, MS */
+	u32	caamvid_ls;	/* CAAM Version ID Register, LS */
+	u8	res5[0xf000];
+} ccsr_sec_t;
+#endif
+
 #ifdef CONFIG_FSL_CORENET
 #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET	0x0000
 #define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x8000
@@ -2059,6 +2050,7 @@ enum {
 #define CONFIG_SYS_MPC85xx_LBC_OFFSET		0x124000
 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET		0x130000
 #define CONFIG_SYS_MPC85xx_USB_OFFSET		0x210000
+#define CONFIG_SYS_FSL_SEC_OFFSET		0x300000
 #define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET	0x318000
 #define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET	0x31a000
 #define CONFIG_SYS_TSEC1_OFFSET			0x4e0000 /* FM1@DTSEC0 */
@@ -2111,7 +2103,7 @@ enum {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
 #define CONFIG_SYS_MPC85xx_DDR2_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
-#define CONFIG_SYS_MPC85xx_LBC_ADDR \
+#define CONFIG_SYS_LBC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
 #define CONFIG_SYS_MPC85xx_ESPI_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET)
@@ -2143,6 +2135,8 @@ enum {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET)
 #define CONFIG_SYS_MPC85xx_USB_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
+#define CONFIG_SYS_FSL_SEC_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
 
 #define TSEC_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 #define MDIO_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h
index fd7acdb76..b9e02dbc7 100644
--- a/arch/powerpc/include/asm/immap_86xx.h
+++ b/arch/powerpc/include/asm/immap_86xx.h
@@ -12,6 +12,7 @@
 
 #include <asm/types.h>
 #include <asm/fsl_dma.h>
+#include <asm/fsl_lbc.h>
 #include <asm/fsl_i2c.h>
 
 /* Local-Access Registers and MCM Registers(0x0000-0x2000) */
@@ -190,51 +191,6 @@ typedef struct ccsr_duart {
 	char	res5[2543];
 } ccsr_duart_t;
 
-
-/* Local Bus Controller Registers(0x5000-0x6000) */
-typedef struct ccsr_lbc {
-	uint	br0;		/* 0x5000 - LBC Base Register 0 */
-	uint	or0;		/* 0x5004 - LBC Options Register 0 */
-	uint	br1;		/* 0x5008 - LBC Base Register 1 */
-	uint	or1;		/* 0x500c - LBC Options Register 1 */
-	uint	br2;		/* 0x5010 - LBC Base Register 2 */
-	uint	or2;		/* 0x5014 - LBC Options Register 2 */
-	uint	br3;		/* 0x5018 - LBC Base Register 3 */
-	uint	or3;		/* 0x501c - LBC Options Register 3 */
-	uint	br4;		/* 0x5020 - LBC Base Register 4 */
-	uint	or4;		/* 0x5024 - LBC Options Register 4 */
-	uint	br5;		/* 0x5028 - LBC Base Register 5 */
-	uint	or5;		/* 0x502c - LBC Options Register 5 */
-	uint	br6;		/* 0x5030 - LBC Base Register 6 */
-	uint	or6;		/* 0x5034 - LBC Options Register 6 */
-	uint	br7;		/* 0x5038 - LBC Base Register 7 */
-	uint	or7;		/* 0x503c - LBC Options Register 7 */
-	char	res1[40];
-	uint	mar;		/* 0x5068 - LBC UPM Address Register */
-	char	res2[4];
-	uint	mamr;		/* 0x5070 - LBC UPMA Mode Register */
-	uint	mbmr;		/* 0x5074 - LBC UPMB Mode Register */
-	uint	mcmr;		/* 0x5078 - LBC UPMC Mode Register */
-	char	res3[8];
-	uint	mrtpr;		/* 0x5084 - LBC Memory Refresh Timer Prescaler Register */
-	uint	mdr;		/* 0x5088 - LBC UPM Data Register */
-	char	res4[8];
-	uint	lsdmr;		/* 0x5094 - LBC SDRAM Mode Register */
-	char	res5[8];
-	uint	lurt;		/* 0x50a0 - LBC UPM Refresh Timer */
-	uint	lsrt;		/* 0x50a4 - LBC SDRAM Refresh Timer */
-	char	res6[8];
-	uint	ltesr;		/* 0x50b0 - LBC Transfer Error Status Register */
-	uint	ltedr;		/* 0x50b4 - LBC Transfer Error Disable Register */
-	uint	lteir;		/* 0x50b8 - LBC Transfer Error Interrupt Register */
-	uint	lteatr;		/* 0x50bc - LBC Transfer Error Attributes Register */
-	uint	ltear;		/* 0x50c0 - LBC Transfer Error Address Register */
-	char	res7[12];
-	uint	lbcr;		/* 0x50d0 - LBC Configuration Register */
-	uint	lcrr;		/* 0x50d4 - LBC Clock Ratio Register */
-	char	res8[3880];
-} ccsr_lbc_t;
-
 /* PCI Express Registers(0x8000-0x9000) and (0x9000-0xA000) */
 typedef struct ccsr_pex {
 	uint	cfg_addr;	/* 0x8000 - PEX Configuration Address Register */
@@ -1270,7 +1226,7 @@ typedef struct immap {
 	ccsr_ddr_t		im_ddr1;
 	ccsr_i2c_t		im_i2c;
 	ccsr_duart_t		im_duart;
-	ccsr_lbc_t		im_lbc;
+	fsl_lbc_t		im_lbc;
 	ccsr_ddr_t		im_ddr2;
 	char                    res1[4096];
 	ccsr_pex_t		im_pex1;
@@ -1303,6 +1259,7 @@ extern immap_t  *immr;
 
 #define CONFIG_SYS_TSEC1_OFFSET		0x24000
 #define CONFIG_SYS_MDIO1_OFFSET		0x24000
+#define CONFIG_SYS_LBC_ADDR		(&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)
 
 #define TSEC_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 #define MDIO_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 5166507f9..c01c85f6d 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -402,6 +402,7 @@ extern void print_bats(void);
 #define MAS1_TID(x)	((x << 16) & 0x3FFF0000)
 #define MAS1_TS		0x00001000
 #define MAS1_TSIZE(x)	((x << 8) & 0x00000F00)
+#define TSIZE_TO_BYTES(x) ((phys_addr_t)(1UL << ((tsize * 2) + 10)))
 
 #define MAS2_EPN	0xFFFFF000
 #define MAS2_X0		0x00000040
@@ -485,6 +486,7 @@ extern void init_tlbs(void);
 extern int find_tlb_idx(void *addr, u8 tlbsel);
 extern void init_used_tlb_cams(void);
 extern int find_free_tlbcam(void);
+extern void print_tlbcam(void);
 
 extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
 
diff --git a/arch/powerpc/include/asm/mp.h b/arch/powerpc/include/asm/mp.h
index 5388c951c..3ffa30b97 100644
--- a/arch/powerpc/include/asm/mp.h
+++ b/arch/powerpc/include/asm/mp.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -26,5 +26,6 @@
 void setup_mp(void);
 void cpu_mp_lmb_reserve(struct lmb *lmb);
 u32 determine_mp_bootpg(void);
+int is_core_disabled(int nr);
 
 #endif
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 9ec319ae1..844552c2d 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -534,9 +534,11 @@
 #define SPRN_MCSRR0	0x23a	/* Machine Check Save and Restore Register 0 */
 #define SPRN_MCSRR1	0x23b	/* Machine Check Save and Restore Register 1 */
 #define SPRN_BUCSR	0x3f5	/* Branch Control and Status Register */
+#define	  BUCSR_STAC_EN	0x01000000	/* Segment target addr cache enable */
+#define	  BUCSR_LS_EN	0x00400000	/* Link stack enable */
 #define	  BUCSR_BBFI	0x00000200	/* Branch buffer flash invalidate */
 #define	  BUCSR_BPEN	0x00000001	/* Branch prediction enable */
-#define   BUCSR_ENABLE (BUCSR_BBFI|BUCSR_BPEN)
+#define   BUCSR_ENABLE (BUCSR_STAC_EN|BUCSR_LS_EN|BUCSR_BBFI|BUCSR_BPEN)
 #define SPRN_BBEAR	0x201	/* Branch Buffer Entry Address Register */
 #define SPRN_BBTAR	0x202	/* Branch Buffer Target Address Register */
 #define SPRN_PID1	0x279	/* Process ID Register 1 */
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c
index c11a5c349..4f7d935df 100644
--- a/board/atum8548/atum8548.c
+++ b/board/atum8548/atum8548.c
@@ -47,7 +47,7 @@ int board_early_init_f (void)
 int checkboard (void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 
 	if ((uint)&gur->porpllsr != 0xe00e0000) {
diff --git a/board/esd/vme8349/vme8349.c b/board/esd/vme8349/vme8349.c
index b0ebad72b..96698e720 100644
--- a/board/esd/vme8349/vme8349.c
+++ b/board/esd/vme8349/vme8349.c
@@ -105,7 +105,7 @@ int misc_init_r()
 {
 	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 
-	clrsetbits_be32(&im->lbus.lcrr, LBCR_LDIS, 0);
+	clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0);
 
 	return 0;
 }
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index df289aa63..2d48d7ea3 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -42,6 +42,10 @@ COBJS-$(CONFIG_MPC8541CDS)	+= cds_pci_ft.o
 COBJS-$(CONFIG_MPC8548CDS)	+= cds_pci_ft.o
 COBJS-$(CONFIG_MPC8555CDS)	+= cds_pci_ft.o
 
+COBJS-$(CONFIG_MPC8536DS)	+= ics307_clk.o
+COBJS-$(CONFIG_MPC8572DS)	+= ics307_clk.o
+COBJS-$(CONFIG_P1022DS)		+= ics307_clk.o
+COBJS-$(CONFIG_P2020DS)		+= ics307_clk.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c
new file mode 100644
index 000000000..89d8810f7
--- /dev/null
+++ b/board/freescale/common/ics307_clk.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#include "ics307_clk.h"
+
+#ifdef CONFIG_FSL_NGPIXIS
+#include "ngpixis.h"
+#else
+#include "pixis.h"
+#endif
+
+/* decode S[0-2] to Output Divider (OD) */
+static u8 ics307_s_to_od[] = {
+	10, 2, 8, 4, 5, 7, 3, 6
+};
+
+/*
+ * Calculate frequency being generated by ICS307-02 clock chip based upon
+ * the control bytes being programmed into it.
+ */
+static unsigned long ics307_clk_freq(u8 cw0, u8 cw1, u8 cw2)
+{
+	const unsigned long input_freq = CONFIG_ICS307_REFCLK_HZ;
+	unsigned long vdw = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
+	unsigned long rdw = cw2 & 0x7F;
+	unsigned long od = ics307_s_to_od[cw0 & 0x7];
+	unsigned long freq;
+
+	/*
+	 * CLK1 Freq = Input Frequency * 2 * (VDW + 8) / ((RDW + 2) * OD)
+	 *
+	 * cw0:  C1 C0 TTL F1 F0 S2 S1 S0
+	 * cw1:  V8 V7 V6 V5 V4 V3 V2 V1
+	 * cw2:  V0 R6 R5 R4 R3 R2 R1 R0
+	 *
+	 * R6:R0 = Reference Divider Word (RDW)
+	 * V8:V0 = VCO Divider Word (VDW)
+	 * S2:S0 = Output Divider Select (OD)
+	 * F1:F0 = Function of CLK2 Output
+	 * TTL = duty cycle
+	 * C1:C0 = internal load capacitance for cyrstal
+	 *
+	 */
+
+	freq = input_freq * 2 * (vdw + 8) / ((rdw + 2) * od);
+
+	debug("ICS307: CW[0-2]: %02X %02X %02X => %lu Hz\n", cw0, cw1, cw2,
+			freq);
+	return freq;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+	return ics307_clk_freq(
+			in_8(&pixis->sclk[0]),
+			in_8(&pixis->sclk[1]),
+			in_8(&pixis->sclk[2]));
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+	return ics307_clk_freq(
+			in_8(&pixis->dclk[0]),
+			in_8(&pixis->dclk[1]),
+			in_8(&pixis->dclk[2]));
+}
diff --git a/board/freescale/common/ics307_clk.h b/board/freescale/common/ics307_clk.h
new file mode 100644
index 000000000..db3dbc41f
--- /dev/null
+++ b/board/freescale/common/ics307_clk.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ICS_CLK_H_
+#define __ICS_CLK_H_	1
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_board_sys_clk(void);
+extern unsigned long get_board_ddr_clk(void);
+#endif
+
+#endif	/* __ICS_CLK_H_ */
diff --git a/board/freescale/common/ngpixis.h b/board/freescale/common/ngpixis.h
index 3c59ea802..089408b76 100644
--- a/board/freescale/common/ngpixis.h
+++ b/board/freescale/common/ngpixis.h
@@ -45,7 +45,7 @@ typedef struct ngpixis {
 		u8 sw;
 		u8 en;
 	} s[8];
-} ngpixis_t  __attribute__ ((aligned(1)));
+} __attribute__ ((packed)) ngpixis_t;
 
 /* Pointer to the PIXIS register set */
 #define pixis ((ngpixis_t *)PIXIS_BASE)
diff --git a/board/freescale/common/pixis.h b/board/freescale/common/pixis.h
new file mode 100644
index 000000000..7f86de79d
--- /dev/null
+++ b/board/freescale/common/pixis.h
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __PIXIS_H_
+#define __PIXIS_H_	1
+
+/* PIXIS register set. */
+#if defined(CONFIG_MPC8536DS)
+typedef struct pixis {
+	u8 id;
+	u8 ver;
+	u8 pver;
+	u8 csr;
+	u8 rst;
+	u8 rst2;
+	u8 aux1;
+	u8 spd;
+	u8 aux2;
+	u8 csr2;
+	u8 watch;
+	u8 led;
+	u8 pwr;
+	u8 res[3];
+	u8 vctl;
+	u8 vstat;
+	u8 vcfgen0;
+	u8 vcfgen1;
+	u8 vcore0;
+	u8 res1;
+	u8 vboot;
+	u8 vspeed[3];
+	u8 sclk[3];
+	u8 dclk[3];
+	u8 i2cdacr;
+	u8 vcoreacc[4];
+	u8 vcorecnt[3];
+	u8 vcoremax[2];
+	u8 vplatacc[4];
+	u8 vplatcnt[3];
+	u8 vplatmax[2];
+	u8 vtempacc[4];
+	u8 vtempcnt[3];
+	u8 vtempmax[2];
+	u8 res2[4];
+} __attribute__ ((packed)) pixis_t;
+
+#elif defined(CONFIG_MPC8544DS)
+typedef struct pixis {
+	u8 id;
+	u8 ver;
+	u8 pver;
+	u8 csr;
+	u8 rst;
+	u8 pwr;
+	u8 aux1;
+	u8 spd;
+	u8 res[8];
+	u8 vctl;
+	u8 vstat;
+	u8 vcfgen0;
+	u8 vcfgen1;
+	u8 vcore0;
+	u8 res1;
+	u8 vboot;
+	u8 vspeed[2];
+	u8 vclkh;
+	u8 vclkl;
+	u8 watch;
+	u8 led;
+	u8 vspeed2;
+	u8 res2[34];
+} __attribute__ ((packed)) pixis_t;
+
+#elif defined(CONFIG_MPC8572DS)
+typedef struct pixis {
+	u8 id;
+	u8 ver;
+	u8 pver;
+	u8 csr;
+	u8 rst;
+	u8 pwr1;
+	u8 aux1;
+	u8 spd;
+	u8 aux2;
+	u8 res[7];
+	u8 vctl;
+	u8 vstat;
+	u8 vcfgen0;
+	u8 vcfgen1;
+	u8 vcore0;
+	u8 res1;
+	u8 vboot;
+	u8 vspeed[3];
+	u8 res2[2];
+	u8 sclk[3];
+	u8 dclk[3];
+	u8 res3[2];
+	u8 watch;
+	u8 led;
+	u8 res4[25];
+} __attribute__ ((packed)) pixis_t;
+
+#elif defined(CONFIG_MPC8610HPCD)
+typedef struct pixis {
+	u8 id;
+	u8 ver;	/* also called arch */
+	u8 pver;
+	u8 csr;
+	u8 rst;
+	u8 pwr;
+	u8 aux;
+	u8 spd;
+	u8 brdcfg0;
+	u8 brdcfg1;
+	u8 res[4];
+	u8 led;
+	u8 serno;
+	u8 vctl;
+	u8 vstat;
+	u8 vcfgen0;
+	u8 vcfgen1;
+	u8 vcore0;
+	u8 res1;
+	u8 vboot;
+	u8 vspeed[2];
+	u8 res2;
+	u8 sclk[3];
+	u8 res3;
+	u8 watch;
+	u8 res4[33];
+} __attribute__ ((packed)) pixis_t;
+
+#elif defined(CONFIG_MPC8641HPCN)
+typedef struct pixis {
+	u8 id;
+	u8 ver;
+	u8 pver;
+	u8 csr;
+	u8 rst;
+	u8 pwr;
+	u8 aux;
+	u8 spd;
+	u8 res[8];
+	u8 vctl;
+	u8 vstat;
+	u8 vcfgen0;
+	u8 vcfgen1;
+	u8 vcore0;
+	u8 res1;
+	u8 vboot;
+	u8 vspeed[2];
+	u8 vclkh;
+	u8 vclkl;
+	u8 watch;
+	u8 res3[36];
+} __attribute__ ((packed)) pixis_t;
+#else
+#error Need to define pixis_t for this board
+#endif
+
+/* Pointer to the PIXIS register set */
+#define pixis ((pixis_t *)PIXIS_BASE)
+
+#endif	/* __PIXIS_H_ */
diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c
index 0c4fd6854..7aede136d 100644
--- a/board/freescale/mpc8313erdb/sdram.c
+++ b/board/freescale/mpc8313erdb/sdram.c
@@ -110,7 +110,7 @@ static long fixed_sdram(void)
 phys_size_t initdram(int board_type)
 {
 	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbc = &im->lbus;
+	volatile fsl_lbc_t *lbc = &im->im_lbc;
 	u32 msize;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index 61d124960..365ac3792 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -192,7 +192,7 @@ int checkboard (void)
 void sdram_init(void)
 {
 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbc = &immap->lbus;
+	volatile fsl_lbc_t *lbc = &immap->im_lbc;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	/*
diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c
index 7da39f18e..56475795b 100644
--- a/board/freescale/mpc8349itx/mpc8349itx.c
+++ b/board/freescale/mpc8349itx/mpc8349itx.c
@@ -221,15 +221,14 @@ int misc_init_f(void)
 		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01
 	};
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbus = &immap->lbus;
 
-	lbus->bank[3].br = CONFIG_SYS_BR3_PRELIM;
-	lbus->bank[3].or = CONFIG_SYS_OR3_PRELIM;
+	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
+	set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
 
 	/* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000,
 	   GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000
 	 */
-	lbus->mamr = 0x08404440;
+	immap->im_lbc.mamr = 0x08404440;
 
 	upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0]));
 
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index 4f557329f..59ada9ca7 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -280,7 +280,7 @@ int checkboard(void)
 static int sdram_init(unsigned int base)
 {
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbc = &immap->lbus;
+	fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024;
 	int rem = base % sdram_size;
 	uint *sdram_addr;
@@ -293,8 +293,8 @@ static int sdram_init(unsigned int base)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	immap->lbus.bank[2].br = base | CONFIG_SYS_BR2;
-	immap->lbus.bank[2].or = CONFIG_SYS_OR2;
+	set_lbc_br(2, base | CONFIG_SYS_BR2);
+	set_lbc_or(2, CONFIG_SYS_OR2);
 	immap->sysconf.lblaw[2].bar = base;
 	immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2;
 
diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c
index 9ffffb436..92d56a3da 100644
--- a/board/freescale/mpc8360erdk/nand.c
+++ b/board/freescale/mpc8360erdk/nand.c
@@ -82,9 +82,9 @@ static struct fsl_upm_nand fun = {
 
 int board_nand_init(struct nand_chip *nand)
 {
-	fun.upm.mxmr = &im->lbus.mamr;
-	fun.upm.mdr = &im->lbus.mdr;
-	fun.upm.mar = &im->lbus.mar;
+	fun.upm.mxmr = &im->im_lbc.mamr;
+	fun.upm.mdr = &im->im_lbc.mdr;
+	fun.upm.mar = &im->im_lbc.mar;
 
 	upm_setup(&fun.upm);
 
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index 196810671..50ca3cae9 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -350,154 +350,6 @@ int board_early_init_r(void)
 	return 0;
 }
 
-#ifdef CONFIG_GET_CLK_FROM_ICS307
-/* decode S[0-2] to Output Divider (OD) */
-static unsigned char
-ics307_S_to_OD[] = {
-	10, 2, 8, 4, 5, 7, 3, 6
-};
-
-/* Calculate frequency being generated by ICS307-02 clock chip based upon
- * the control bytes being programmed into it. */
-/* XXX: This function should probably go into a common library */
-static unsigned long
-ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2)
-{
-	const unsigned long long InputFrequency = CONFIG_ICS307_REFCLK_HZ;
-	unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
-	unsigned long RDW = cw2 & 0x7F;
-	unsigned long OD = ics307_S_to_OD[cw0 & 0x7];
-	unsigned long freq;
-
-	/* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */
-
-	/* cw0:  C1 C0 TTL F1 F0 S2 S1 S0
-	 * cw1:  V8 V7 V6 V5 V4 V3 V2 V1
-	 * cw2:  V0 R6 R5 R4 R3 R2 R1 R0
-	 *
-	 * R6:R0 = Reference Divider Word (RDW)
-	 * V8:V0 = VCO Divider Word (VDW)
-	 * S2:S0 = Output Divider Select (OD)
-	 * F1:F0 = Function of CLK2 Output
-	 * TTL = duty cycle
-	 * C1:C0 = internal load capacitance for cyrstal
-	 */
-
-	/* Adding 1 to get a "nicely" rounded number, but this needs
-	 * more tweaking to get a "properly" rounded number. */
-
-	freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD));
-
-	debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2,
-		freq);
-	return freq;
-}
-
-unsigned long
-get_board_sys_clk(ulong dummy)
-{
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
-	return ics307_clk_freq (
-	    in_8(pixis_base + PIXIS_VSYSCLK0),
-	    in_8(pixis_base + PIXIS_VSYSCLK1),
-	    in_8(pixis_base + PIXIS_VSYSCLK2)
-	);
-}
-
-unsigned long
-get_board_ddr_clk(ulong dummy)
-{
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
-	return ics307_clk_freq (
-	    in_8(pixis_base + PIXIS_VDDRCLK0),
-	    in_8(pixis_base + PIXIS_VDDRCLK1),
-	    in_8(pixis_base + PIXIS_VDDRCLK2)
-	);
-}
-#else
-unsigned long
-get_board_sys_clk(ulong dummy)
-{
-	u8 i;
-	ulong val = 0;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
-	i = in_8(pixis_base + PIXIS_SPD);
-	i &= 0x07;
-
-	switch (i) {
-	case 0:
-		val = 33333333;
-		break;
-	case 1:
-		val = 40000000;
-		break;
-	case 2:
-		val = 50000000;
-		break;
-	case 3:
-		val = 66666666;
-		break;
-	case 4:
-		val = 83333333;
-		break;
-	case 5:
-		val = 100000000;
-		break;
-	case 6:
-		val = 133333333;
-		break;
-	case 7:
-		val = 166666666;
-		break;
-	}
-
-	return val;
-}
-
-unsigned long
-get_board_ddr_clk(ulong dummy)
-{
-	u8 i;
-	ulong val = 0;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
-	i = in_8(pixis_base + PIXIS_SPD);
-	i &= 0x38;
-	i >>= 3;
-
-	switch (i) {
-	case 0:
-		val = 33333333;
-		break;
-	case 1:
-		val = 40000000;
-		break;
-	case 2:
-		val = 50000000;
-		break;
-	case 3:
-		val = 66666666;
-		break;
-	case 4:
-		val = 83333333;
-		break;
-	case 5:
-		val = 100000000;
-		break;
-	case 6:
-		val = 133333333;
-		break;
-	case 7:
-		val = 166666666;
-		break;
-	}
-	return val;
-}
-#endif
-
 int board_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_TSEC_ENET
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index 9e3f67768..f9ff827f4 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -117,7 +117,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -176,7 +176,7 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	puts("    SDRAM: ");
@@ -185,8 +185,8 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index c30d966b6..0580fe723 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -291,7 +291,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -340,7 +340,7 @@ sdram_init(void)
 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
@@ -352,16 +352,11 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
-	asm("msync");
-
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
-
 	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 0be2d892d..581d5f26e 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -40,7 +40,7 @@
 int checkboard (void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 	u8 vboot;
 	u8 *pixis_base = (u8 *)PIXIS_BASE;
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index aa3f32bf6..f0169959a 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -118,7 +118,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -154,7 +154,7 @@ sdram_init(void)
 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
@@ -166,16 +166,11 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
-	asm("msync");
-
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
-
 	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index ecddd0d9c..b7e0e0cd8 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -291,7 +291,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -340,7 +340,7 @@ sdram_init(void)
 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
@@ -352,12 +352,8 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
-	asm("msync");
-
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 2bca0f28e..489f90b14 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -322,7 +322,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -381,7 +381,7 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	puts("    SDRAM: ");
@@ -390,8 +390,8 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 4ec13a969..036bf9528 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -181,7 +181,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -214,7 +214,7 @@ sdram_init(void)
 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint lsdmr_common;
 
@@ -225,16 +225,13 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	asm("msync");
 
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
-
 	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 1eddeef37..81e8ff51e 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -308,7 +308,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index 6029a5185..81d481a17 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -284,149 +284,6 @@ int board_early_init_r(void)
 	return 0;
 }
 
-#ifdef CONFIG_GET_CLK_FROM_ICS307
-/* decode S[0-2] to Output Divider (OD) */
-static unsigned char ics307_S_to_OD[] = {
-	10, 2, 8, 4, 5, 7, 3, 6
-};
-
-/* Calculate frequency being generated by ICS307-02 clock chip based upon
- * the control bytes being programmed into it. */
-/* XXX: This function should probably go into a common library */
-static unsigned long
-ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2)
-{
-	const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ;
-	unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
-	unsigned long RDW = cw2 & 0x7F;
-	unsigned long OD = ics307_S_to_OD[cw0 & 0x7];
-	unsigned long freq;
-
-	/* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */
-
-	/* cw0:  C1 C0 TTL F1 F0 S2 S1 S0
-	 * cw1:  V8 V7 V6 V5 V4 V3 V2 V1
-	 * cw2:  V0 R6 R5 R4 R3 R2 R1 R0
-	 *
-	 * R6:R0 = Reference Divider Word (RDW)
-	 * V8:V0 = VCO Divider Word (VDW)
-	 * S2:S0 = Output Divider Select (OD)
-	 * F1:F0 = Function of CLK2 Output
-	 * TTL = duty cycle
-	 * C1:C0 = internal load capacitance for cyrstal
-	 */
-
-	/* Adding 1 to get a "nicely" rounded number, but this needs
-	 * more tweaking to get a "properly" rounded number. */
-
-	freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD));
-
-	debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2,
-			freq);
-	return freq;
-}
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
-	return ics307_clk_freq (
-			in_8(pixis_base + PIXIS_VSYSCLK0),
-			in_8(pixis_base + PIXIS_VSYSCLK1),
-			in_8(pixis_base + PIXIS_VSYSCLK2)
-			);
-}
-
-unsigned long get_board_ddr_clk(ulong dummy)
-{
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
-	return ics307_clk_freq (
-			in_8(pixis_base + PIXIS_VDDRCLK0),
-			in_8(pixis_base + PIXIS_VDDRCLK1),
-			in_8(pixis_base + PIXIS_VDDRCLK2)
-			);
-}
-#else
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	u8 i;
-	ulong val = 0;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
-	i = in_8(pixis_base + PIXIS_SPD);
-	i &= 0x07;
-
-	switch (i) {
-		case 0:
-			val = 33333333;
-			break;
-		case 1:
-			val = 40000000;
-			break;
-		case 2:
-			val = 50000000;
-			break;
-		case 3:
-			val = 66666666;
-			break;
-		case 4:
-			val = 83333333;
-			break;
-		case 5:
-			val = 100000000;
-			break;
-		case 6:
-			val = 133333333;
-			break;
-		case 7:
-			val = 166666666;
-			break;
-	}
-
-	return val;
-}
-
-unsigned long get_board_ddr_clk(ulong dummy)
-{
-	u8 i;
-	ulong val = 0;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
-	i = in_8(pixis_base + PIXIS_SPD);
-	i &= 0x38;
-	i >>= 3;
-
-	switch (i) {
-		case 0:
-			val = 33333333;
-			break;
-		case 1:
-			val = 40000000;
-			break;
-		case 2:
-			val = 50000000;
-			break;
-		case 3:
-			val = 66666666;
-			break;
-		case 4:
-			val = 83333333;
-			break;
-		case 5:
-			val = 100000000;
-			break;
-		case 6:
-			val = 133333333;
-			break;
-		case 7:
-			val = 166666666;
-			break;
-	}
-	return val;
-}
-#endif
-
 #ifdef CONFIG_TSEC_ENET
 int board_eth_init(bd_t *bis)
 {
diff --git a/board/freescale/p1022ds/Makefile b/board/freescale/p1022ds/Makefile
new file mode 100644
index 000000000..8ede2d605
--- /dev/null
+++ b/board/freescale/p1022ds/Makefile
@@ -0,0 +1,39 @@
+#
+# Copyright 2010 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or (at your option)
+# any later version.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= ddr.o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/p1022ds/config.mk b/board/freescale/p1022ds/config.mk
new file mode 100644
index 000000000..4581d20c3
--- /dev/null
+++ b/board/freescale/p1022ds/config.mk
@@ -0,0 +1,14 @@
+#
+# Copyright 2010 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or (at your option)
+# any later version.
+#
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xeff80000
+endif
+
+RESET_VECTOR_ADDRESS = 0xeffffffc
diff --git a/board/freescale/p1022ds/ddr.c b/board/freescale/p1022ds/ddr.c
new file mode 100644
index 000000000..7ecfb3e81
--- /dev/null
+++ b/board/freescale/p1022ds/ddr.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ *          Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+unsigned int fsl_ddr_get_mem_data_rate(void)
+{
+	return get_ddr_freq(0);
+}
+
+void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, unsigned int ctrl_num)
+{
+	int ret;
+
+	/*
+	 * The P1022 has only one DDR controller, and the board has only one
+	 * DIMM slot.
+	 */
+	ret = i2c_read(SPD_EEPROM_ADDRESS1, 0, 1, (u8 *)ctrl_dimms_spd,
+		       sizeof(ddr3_spd_eeprom_t));
+	if (ret) {
+		debug("DDR: failed to read SPD from address %u\n",
+		      SPD_EEPROM_ADDRESS1);
+		memset(ctrl_dimms_spd, 0, sizeof(ddr3_spd_eeprom_t));
+	}
+}
+
+typedef struct {
+	u32 datarate_mhz_low;
+	u32 datarate_mhz_high;
+	u32 n_ranks;
+	u32 clk_adjust;		/* Range: 0-8 */
+	u32 cpo;		/* Range: 2-31 */
+	u32 write_data_delay;	/* Range: 0-6 */
+	u32 force_2T;
+} board_specific_parameters_t;
+
+static const board_specific_parameters_t bsp[] = {
+/*
+ *        lo|  hi|  num|  clk| cpo|wrdata|2T
+ *       mhz| mhz|ranks|adjst|    | delay|
+ */
+	{  0, 333,    1,    5,  31,     3, 0},
+	{334, 400,    1,    5,  31,     3, 0},
+	{401, 549,    1,    5,  31,     3, 0},
+	{550, 680,    1,    5,  31,     5, 0},
+	{681, 850,    1,    5,  31,     5, 0},
+	{  0, 333,    2,    5,  31,     3, 0},
+	{334, 400,    2,    5,  31,     3, 0},
+	{401, 549,    2,    5,  31,     3, 0},
+	{550, 680,    2,    5,  31,     5, 0},
+	{681, 850,    2,    5,  31,     5, 0},
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm,
+			   unsigned int ctrl_num)
+{
+	unsigned long ddr_freq;
+	unsigned int i;
+
+	/* set odt_rd_cfg and odt_wr_cfg. */
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		popts->cs_local_opts[i].odt_rd_cfg = 0;
+		popts->cs_local_opts[i].odt_wr_cfg = 1;
+	}
+
+	/*
+	 * Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	for (i = 0; i < ARRAY_SIZE(bsp); i++) {
+		if (ddr_freq >= bsp[i].datarate_mhz_low &&
+		    ddr_freq <= bsp[i].datarate_mhz_high &&
+		    pdimm->n_ranks == bsp[i].n_ranks) {
+			popts->clk_adjust = bsp[i].clk_adjust;
+			popts->cpo_override = bsp[i].cpo;
+			popts->write_data_delay = bsp[i].write_data_delay;
+			popts->twoT_en = bsp[i].force_2T;
+			break;
+		}
+	}
+
+	popts->half_strength_driver_enable = 1;
+
+	/* Per AN4039, enable ZQ calibration. */
+	popts->zq_en = 1;
+
+	/*
+	 * For wake-up on ARP, we need auto self refresh enabled
+	 */
+	popts->auto_self_refresh_en = 1;
+	popts->sr_it = 0xb;
+}
diff --git a/board/freescale/p1022ds/law.c b/board/freescale/p1022ds/law.c
new file mode 100644
index 000000000..b23b8f9af
--- /dev/null
+++ b/board/freescale/p1022ds/law.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ *          Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
new file mode 100644
index 000000000..be692cb45
--- /dev/null
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ *          Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
+#include <asm/io.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <tsec.h>
+#include <asm/fsl_law.h>
+#include <asm/mp.h>
+#include <netdev.h>
+#include <i2c.h>
+
+#include "../common/ngpixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+	/* Set pmuxcr to allow both i2c1 and i2c2 */
+	setbits_be32(&gur->pmuxcr, 0x1000);
+
+	/* Read back the register to synchronize the write. */
+	in_be32(&gur->pmuxcr);
+
+	/* Set the pin muxing to enable ETSEC2. */
+	clrbits_be32(&gur->pmuxcr2, 0x001F8000);
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	u8 sw;
+
+	puts("Board: P1022DS ");
+
+	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+		in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
+
+	sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
+
+	switch ((sw & PIXIS_LBMAP_MASK) >> 6) {
+	case 0:
+		printf ("vBank: %u\n", ((sw & 0x30) >> 4));
+		break;
+	case 1:
+		printf ("NAND\n");
+		break;
+	case 2:
+	case 3:
+		puts ("Promjet\n");
+		break;
+	}
+
+	return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size = 0;
+
+	puts("Initializing....\n");
+
+	dram_size = fsl_ddr_sdram();
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000) * 0x100000;
+
+	puts("    DDR: ");
+	return dram_size;
+}
+
+#define CONFIG_TFP410_I2C_ADDR	0x38
+
+int misc_init_r(void)
+{
+	u8 temp;
+
+	/*  Enable the TFP410 Encoder */
+
+	temp = 0xBF;
+	if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0)
+		return -1;
+
+	/* Verify if enabled */
+	temp = 0;
+	if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0)
+		return -1;
+
+	debug("DVI Encoder Read: 0x%02x\n", temp);
+
+	temp = 0x10;
+	if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0)
+		return -1;
+
+	/* Verify if enabled */
+	temp = 0;
+	if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0)
+		return -1;
+
+	debug("DVI Encoder Read: 0x%02x\n",temp);
+
+	return 0;
+}
+
+/*
+ * A list of PCI and SATA slots
+ */
+enum slot_id {
+	SLOT_PCIE1 = 1,
+	SLOT_PCIE2,
+	SLOT_PCIE3,
+	SLOT_PCIE4,
+	SLOT_PCIE5,
+	SLOT_SATA1,
+	SLOT_SATA2
+};
+
+/*
+ * This array maps the slot identifiers to their names on the P1022DS board.
+ */
+static const char *slot_names[] = {
+	[SLOT_PCIE1] = "Slot 1",
+	[SLOT_PCIE2] = "Slot 2",
+	[SLOT_PCIE3] = "Slot 3",
+	[SLOT_PCIE4] = "Slot 4",
+	[SLOT_PCIE5] = "Mini-PCIe",
+	[SLOT_SATA1] = "SATA 1",
+	[SLOT_SATA2] = "SATA 2",
+};
+
+/*
+ * This array maps a given SERDES configuration and SERDES device to the PCI or
+ * SATA slot that it connects to.  This mapping is hard-coded in the FPGA.
+ */
+static u8 serdes_dev_slot[][SATA2 + 1] = {
+	[0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 },
+	[0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
+	[0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4,
+		   [PCIE2] = SLOT_PCIE5 },
+	[0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
+		   [PCIE2] = SLOT_PCIE3,
+		   [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
+	[0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
+		   [PCIE2] = SLOT_PCIE3 },
+	[0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3,
+		   [PCIE2] = SLOT_PCIE3,
+		   [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
+	[0x1c] = { [PCIE1] = SLOT_PCIE1,
+		   [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
+	[0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 },
+	[0x1f] = { [PCIE1] = SLOT_PCIE1 },
+};
+
+
+/*
+ * Returns the name of the slot to which the PCIe or SATA controller is
+ * connected
+ */
+const char *serdes_slot_name(enum srds_prtcl device)
+{
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+	enum slot_id slot = serdes_dev_slot[srds_cfg][device];
+	const char *name = slot_names[slot];
+
+	if (name)
+		return name;
+	else
+		return "Nothing";
+}
+
+static void configure_pcie(struct fsl_pci_info *info,
+			   struct pci_controller *hose,
+			   const char *connected)
+{
+	static int bus_number = 0;
+	int is_endpoint;
+
+	set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law);
+	set_next_law(info->io_phys, law_size_bits(info->io_size), info->law);
+	is_endpoint = fsl_setup_hose(hose, info->regs);
+	printf("    PCIE%u connected to %s as %s (base addr %lx)\n",
+	       info->pci_num, connected,
+	       is_endpoint ? "Endpoint" : "Root Complex", info->regs);
+	bus_number = fsl_pci_init_port(info, hose, bus_number);
+}
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif
+
+#ifdef CONFIG_PCIE3
+static struct pci_controller pcie3_hose;
+#endif
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	struct fsl_pci_info pci_info;
+	u32 devdisr = in_be32(&gur->devdisr);
+
+#ifdef CONFIG_PCIE1
+	if (is_serdes_configured(PCIE1) && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
+		SET_STD_PCIE_INFO(pci_info, 1);
+		configure_pcie(&pci_info, &pcie1_hose, serdes_slot_name(PCIE1));
+	} else {
+		printf("    PCIE1: disabled\n");
+	}
+#else
+	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
+#endif
+
+#ifdef CONFIG_PCIE2
+	if (is_serdes_configured(PCIE2) && !(devdisr & MPC85xx_DEVDISR_PCIE2)) {
+		SET_STD_PCIE_INFO(pci_info, 2);
+		configure_pcie(&pci_info, &pcie2_hose, serdes_slot_name(PCIE2));
+	} else {
+		printf("    PCIE2: disabled\n");
+	}
+#else
+	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
+#endif
+
+#ifdef CONFIG_PCIE3
+	if (is_serdes_configured(PCIE3) && !(devdisr & MPC85xx_DEVDISR_PCIE3)) {
+		SET_STD_PCIE_INFO(pci_info, 3);
+		configure_pcie(&pci_info, &pcie3_hose, serdes_slot_name(PCIE3));
+	} else {
+		printf("    PCIE3: disabled\n");
+	}
+#else
+	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
+#endif
+}
+#endif
+
+int board_early_init_r(void)
+{
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash + PROMJET region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash + promjet */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+	return 0;
+}
+
+/*
+ * Initialize on-board and/or PCI Ethernet devices
+ *
+ * Returns:
+ *      <0, error
+ *       0, no ethernet devices found
+ *      >0, number of ethernet devices initialized
+ */
+int board_eth_init(bd_t *bis)
+{
+	struct tsec_info_struct tsec_info[2];
+	unsigned int num = 0;
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	num++;
+#endif
+#ifdef CONFIG_TSEC2
+	SET_STD_TSEC_INFO(tsec_info[num], 2);
+	num++;
+#endif
+
+	return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCIE1
+	ft_fsl_pci_setup(blob, "pci0", &pcie1_hose);
+#else
+	ft_fsl_pci_setup(blob, "pci0", NULL);
+#endif
+
+#ifdef CONFIG_PCIE2
+	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
+#else
+	ft_fsl_pci_setup(blob, "pci1", NULL);
+#endif
+
+#ifdef CONFIG_PCIE3
+	ft_fsl_pci_setup(blob, "pci2", &pcie3_hose);
+#else
+	ft_fsl_pci_setup(blob, "pci2", NULL);
+#endif
+
+#ifdef CONFIG_FSL_SGMII_RISER
+	fsl_sgmii_riser_fdt_fixup(blob);
+#endif
+}
+#endif
+
+#ifdef CONFIG_MP
+void board_lmb_reserve(struct lmb *lmb)
+{
+	cpu_mp_lmb_reserve(lmb);
+}
+#endif
diff --git a/board/freescale/p1022ds/tlb.c b/board/freescale/p1022ds/tlb.c
new file mode 100644
index 000000000..e6201127a
--- /dev/null
+++ b/board/freescale/p1022ds/tlb.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ *          Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 */
+	/* *I*** - Covers boot page */
+	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I,
+		      0, 0, BOOKE_PAGESZ_4K, 1),
+
+	/* *I*G* - CCSRBAR */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 1, BOOKE_PAGESZ_1M, 1),
+
+	/* W**G* - Flash/promjet, localbus */
+	/* This will be changed to *I*G* after relocation to RAM. */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+		      0, 2, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 3, BOOKE_PAGESZ_1G, 1),
+
+	/* *I*G* - PCI */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000,
+		      CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 4, BOOKE_PAGESZ_256M, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000,
+		      CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 5, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI I/O */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 6, BOOKE_PAGESZ_256K, 1),
+
+	SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 7, BOOKE_PAGESZ_4K, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index f0ff209c0..be4b2eb47 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -313,155 +313,6 @@ int board_early_init_r(void)
 	return 0;
 }
 
-#ifdef CONFIG_GET_CLK_FROM_ICS307
-/* decode S[0-2] to Output Divider (OD) */
-static unsigned char ics307_S_to_OD[] = {
-	10, 2, 8, 4, 5, 7, 3, 6
-};
-
-/* Calculate frequency being generated by ICS307-02 clock chip based upon
- * the control bytes being programmed into it. */
-/* XXX: This function should probably go into a common library */
-static unsigned long
-ics307_clk_freq(unsigned char cw0, unsigned char cw1, unsigned char cw2)
-{
-	const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ;
-	unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
-	unsigned long RDW = cw2 & 0x7F;
-	unsigned long OD = ics307_S_to_OD[cw0 & 0x7];
-	unsigned long freq;
-
-	/* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */
-
-	/* cw0:  C1 C0 TTL F1 F0 S2 S1 S0
-	 * cw1:  V8 V7 V6 V5 V4 V3 V2 V1
-	 * cw2:  V0 R6 R5 R4 R3 R2 R1 R0
-	 *
-	 * R6:R0 = Reference Divider Word (RDW)
-	 * V8:V0 = VCO Divider Word (VDW)
-	 * S2:S0 = Output Divider Select (OD)
-	 * F1:F0 = Function of CLK2 Output
-	 * TTL = duty cycle
-	 * C1:C0 = internal load capacitance for cyrstal
-	 */
-
-	/* Adding 1 to get a "nicely" rounded number, but this needs
-	 * more tweaking to get a "properly" rounded number. */
-
-	freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD));
-
-	debug("ICS307: CW[0-2]: %02X %02X %02X => %lu Hz\n", cw0, cw1, cw2,
-			freq);
-	return freq;
-}
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	return gd->bus_clk;
-}
-
-unsigned long get_board_ddr_clk(ulong dummy)
-{
-	return gd->mem_clk;
-}
-
-unsigned long calculate_board_sys_clk(ulong dummy)
-{
-	ulong val;
-
-	val = ics307_clk_freq(in_8(&pixis->sclk[0]), in_8(&pixis->sclk[1]),
-			      in_8(&pixis->sclk[2]));
-	debug("sysclk val = %lu\n", val);
-	return val;
-}
-
-unsigned long calculate_board_ddr_clk(ulong dummy)
-{
-	ulong val;
-
-	val = ics307_clk_freq(in_8(&pixis->dclk[0]), in_8(&pixis->dclk[1]),
-			      in_8(&pixis->dclk[2]));
-	debug("ddrclk val = %lu\n", val);
-	return val;
-}
-#else
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	u8 i;
-	ulong val = 0;
-
-	i = in_8(&pixis->spd);
-	i &= 0x07;
-
-	switch (i) {
-		case 0:
-			val = 33333333;
-			break;
-		case 1:
-			val = 40000000;
-			break;
-		case 2:
-			val = 50000000;
-			break;
-		case 3:
-			val = 66666666;
-			break;
-		case 4:
-			val = 83333333;
-			break;
-		case 5:
-			val = 100000000;
-			break;
-		case 6:
-			val = 133333333;
-			break;
-		case 7:
-			val = 166666666;
-			break;
-	}
-
-	return val;
-}
-
-unsigned long get_board_ddr_clk(ulong dummy)
-{
-	u8 i;
-	ulong val = 0;
-
-	i = in_8(&pixis->spd);
-	i &= 0x38;
-	i >>= 3;
-
-	switch (i) {
-		case 0:
-			val = 33333333;
-			break;
-		case 1:
-			val = 40000000;
-			break;
-		case 2:
-			val = 50000000;
-			break;
-		case 3:
-			val = 66666666;
-			break;
-		case 4:
-			val = 83333333;
-			break;
-		case 5:
-			val = 100000000;
-			break;
-		case 6:
-			val = 133333333;
-			break;
-		case 7:
-			val = 166666666;
-			break;
-	}
-	return val;
-}
-#endif
-
 #ifdef CONFIG_TSEC_ENET
 int board_eth_init(bd_t *bis)
 {
diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c
index 7c272334a..054d644d9 100644
--- a/board/mpc8540eval/mpc8540eval.c
+++ b/board/mpc8540eval/mpc8540eval.c
@@ -69,7 +69,7 @@ phys_size_t initdram (int board_type)
 	long dram_size = 0;
 
 #if !defined(CONFIG_RAM_AS_FLASH)
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	sys_info_t sysinfo;
 	uint temp_lbcdll = 0;
 #endif
@@ -110,8 +110,8 @@ phys_size_t initdram (int board_type)
 		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
 		asm("sync;isync;msync");
 	}
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
 	asm("sync");
diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c
index 5353d738b..a302b9176 100644
--- a/board/pm854/pm854.c
+++ b/board/pm854/pm854.c
@@ -134,7 +134,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c
index b14a3d34b..f9d92d998 100644
--- a/board/pm856/pm856.c
+++ b/board/pm856/pm856.c
@@ -290,7 +290,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c
index 34861d4e1..50fae7c36 100644
--- a/board/sbc8349/sbc8349.c
+++ b/board/sbc8349/sbc8349.c
@@ -160,7 +160,7 @@ int checkboard (void)
 void sdram_init(void)
 {
 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbc = &immap->lbus;
+	volatile fsl_lbc_t *lbc = &immap->im_lbc;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	puts("\n   SDRAM on Local Bus: ");
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index 194f6ab96..d62cfd1be 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -116,7 +116,7 @@ void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -152,7 +152,7 @@ sdram_init(void)
 #if defined(CONFIG_SYS_LBC_SDRAM_SIZE)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint lsdmr_common;
 
@@ -163,22 +163,14 @@ sdram_init(void)
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM);
-	asm("msync");
-
-	out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM);
-	asm("msync");
-
-	out_be32(&lbc->or4, CONFIG_SYS_OR4_PRELIM);
-	asm("msync");
-
-	out_be32(&lbc->br4, CONFIG_SYS_BR4_PRELIM);
-	asm("msync");
+	set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
+	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
+	set_lbc_or(4, CONFIG_SYS_OR4_PRELIM);
+	set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);
 
 	out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
 	asm("msync");
 
-
 	out_be32(&lbc->lsrt,  CONFIG_SYS_LBC_LSRT);
 	out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
 	asm("msync");
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index c40b5e38d..10ba62fa4 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -269,7 +269,7 @@ phys_size_t initdram (int board_type)
 
 #if 0
 #if !defined(CONFIG_RAM_AS_FLASH)
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	sys_info_t sysinfo;
 	uint temp_lbcdll = 0;
 #endif
@@ -310,8 +310,8 @@ phys_size_t initdram (int board_type)
 		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
 		asm("sync;isync;msync");
 	}
-	lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */
-	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
 	asm("sync");
diff --git a/board/sheldon/simpc8313/sdram.c b/board/sheldon/simpc8313/sdram.c
index ebb70a232..ba59943c8 100644
--- a/board/sheldon/simpc8313/sdram.c
+++ b/board/sheldon/simpc8313/sdram.c
@@ -129,7 +129,7 @@ void si_read_i2c(u32 lbyte, int count, u8 *buffer)
 phys_size_t initdram(int board_type)
 {
 	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbc= &im->lbus;
+	volatile fsl_lbc_t *lbc = &im->im_lbc;
 	u32 msize;
 
 	if ((__raw_readl(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32) im)
diff --git a/board/sheldon/simpc8313/simpc8313.c b/board/sheldon/simpc8313/simpc8313.c
index cb30b4885..c2164c9c8 100644
--- a/board/sheldon/simpc8313/simpc8313.c
+++ b/board/sheldon/simpc8313/simpc8313.c
@@ -93,7 +93,7 @@ int misc_init_r(void)
 {
 	int rc = 0;
 	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	fsl_lbus_t *lbus = &immap->lbus;
+	fsl_lbc_t *lbus = &immap->im_lbc;
 	u32 *mxmr = &lbus->mamr;	/* Pointer to mamr */
 
 	/* UPM Table Configuration Code */
diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c
index 9183c15f2..72e7401f1 100644
--- a/board/socrates/socrates.c
+++ b/board/socrates/socrates.c
@@ -87,8 +87,6 @@ int checkboard (void)
 
 int misc_init_r (void)
 {
-	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-
 	/*
 	 * Adjust flash start and offset to detected values
 	 */
@@ -99,8 +97,10 @@ int misc_init_r (void)
 	 * Check if boot FLASH isn't max size
 	 */
 	if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH0)) {
-		memctl->or0 = gd->bd->bi_flashstart | (CONFIG_SYS_OR0_PRELIM & 0x00007fff);
-		memctl->br0 = gd->bd->bi_flashstart | (CONFIG_SYS_BR0_PRELIM & 0x00007fff);
+		set_lbc_or(0, gd->bd->bi_flashstart |
+			   (CONFIG_SYS_OR0_PRELIM & 0x00007fff));
+		set_lbc_br(0, gd->bd->bi_flashstart |
+			   (CONFIG_SYS_BR0_PRELIM & 0x00007fff));
 
 		/*
 		 * Re-check to get correct base address
@@ -112,8 +112,8 @@ int misc_init_r (void)
 	 * Check if only one FLASH bank is available
 	 */
 	if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) {
-		memctl->or1 = 0;
-		memctl->br1 = 0;
+		set_lbc_or(1, 0);
+		set_lbc_br(1, 0);
 
 		/*
 		 * Re-do flash protection upon new addresses
@@ -148,7 +148,7 @@ int misc_init_r (void)
  */
 void local_bus_init (void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 	sys_info_t sysinfo;
 	uint clkdiv;
@@ -299,26 +299,25 @@ const gdc_regs *board_get_regs (void)
 
 int lime_probe(void)
 {
-	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	uint cfg_br2;
 	uint cfg_or2;
 	int type;
 
-	cfg_br2 = memctl->br2;
-	cfg_or2 = memctl->or2;
+	cfg_br2 = get_lbc_br(2);
+	cfg_or2 = get_lbc_or(2);
 
 	/* Configure GPCM for CS2 */
-	memctl->br2 = 0;
-	memctl->or2 = 0xfc000410;
-	memctl->br2 = (CONFIG_SYS_LIME_BASE) | 0x00001901;
+	set_lbc_br(2, 0);
+	set_lbc_or(2, 0xfc000410);
+	set_lbc_br(2, (CONFIG_SYS_LIME_BASE) | 0x00001901);
 
 	/* Get controller type */
 	type = mb862xx_probe(CONFIG_SYS_LIME_BASE);
 
 	/* Restore previous CS2 configuration */
-	memctl->br2 = 0;
-	memctl->or2 = cfg_or2;
-	memctl->br2 = cfg_br2;
+	set_lbc_br(2, 0);
+	set_lbc_or(2, cfg_or2);
+	set_lbc_br(2, cfg_br2);
 
 	return (type == MB862XX_TYPE_LIME) ? 1 : 0;
 }
diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c
index e5648799a..8d046f482 100644
--- a/board/tqc/tqm834x/tqm834x.c
+++ b/board/tqc/tqm834x/tqm834x.c
@@ -253,10 +253,10 @@ static int detect_num_flash_banks(void)
 	debug("Number of flash banks detected: %d\n", tqm834x_num_flash_banks);
 
 	/* set OR0 and BR0 */
-	im->lbus.bank[0].or = CONFIG_SYS_OR_TIMING_FLASH |
-		(-(total_size) & OR_GPCM_AM);
-	im->lbus.bank[0].br = (CONFIG_SYS_FLASH_BASE & BR_BA) |
-		(BR_MS_GPCM | BR_PS_32 | BR_V);
+	set_lbc_or(0, CONFIG_SYS_OR_TIMING_FLASH |
+		   (-(total_size) & OR_GPCM_AM));
+	set_lbc_br(0, (CONFIG_SYS_FLASH_BASE & BR_BA) |
+		   (BR_MS_GPCM | BR_PS_32 | BR_V));
 
 	return (0);
 }
diff --git a/board/tqc/tqm85xx/nand.c b/board/tqc/tqm85xx/nand.c
index 3da689a9e..4b16c31de 100644
--- a/board/tqc/tqm85xx/nand.c
+++ b/board/tqc/tqm85xx/nand.c
@@ -377,7 +377,7 @@ volatile const u32 *nand_upm_patt;
  */
 static void upmb_write (u_char addr, ulong val)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	out_be32 (&lbc->mdr, val);
 
@@ -393,14 +393,14 @@ static void upmb_write (u_char addr, ulong val)
 /*
  * Initialize UPM for NAND flash access.
  */
-static void nand_upm_setup (volatile ccsr_lbc_t *lbc)
+static void nand_upm_setup (volatile fsl_lbc_t *lbc)
 {
 	uint i, j;
 	uint or3 = CONFIG_SYS_OR3_PRELIM;
 	uint clock = get_lbc_clock ();
 
-	out_be32 (&lbc->br3, 0);	/* disable bank and reset all bits */
-	out_be32 (&lbc->br3, CONFIG_SYS_BR3_PRELIM);
+	set_lbc_br(3, 0);	/* disable bank and reset all bits */
+	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
 
 	/*
 	 * Search appropriate UPM table for bus clock.
@@ -424,7 +424,7 @@ static void nand_upm_setup (volatile ccsr_lbc_t *lbc)
 		/* EAD must be set due to TQM8548 timing specification */
 		or3 |= OR_UPM_EAD;
 
-	out_be32 (&lbc->or3, or3);
+	set_lbc_or(3, or3);
 
 	/* Assign address of table */
 	nand_upm_patt = upm_freq_table[i].upm_patt;
@@ -458,7 +458,7 @@ void board_nand_select_device (struct nand_chip *nand, int chip)
 
 int board_nand_init (struct nand_chip *nand)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	if (!nand_upm_patt)
 		nand_upm_setup (lbc);
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index 8c9d58692..fc2a6cbdb 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -269,8 +269,6 @@ int checkboard (void)
 
 int misc_init_r (void)
 {
-	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-
 	/*
 	 * Adjust flash start and offset to detected values
 	 */
@@ -281,26 +279,27 @@ int misc_init_r (void)
 	 * Recalculate CS configuration if second FLASH bank is available
 	 */
 	if (flash_info[0].size > 0) {
-		memctl->or1 = ((-flash_info[0].size) & 0xffff8000) |
-			(CONFIG_SYS_OR1_PRELIM & 0x00007fff);
-		memctl->br1 = gd->bd->bi_flashstart |
-			(CONFIG_SYS_BR1_PRELIM & 0x00007fff);
+		set_lbc_or(1, ((-flash_info[0].size) & 0xffff8000) |
+			   (CONFIG_SYS_OR1_PRELIM & 0x00007fff));
+		set_lbc_br(1, gd->bd->bi_flashstart |
+			   (CONFIG_SYS_BR1_PRELIM & 0x00007fff));
 		/*
 		 * Re-check to get correct base address for bank 1
 		 */
 		flash_get_size (gd->bd->bi_flashstart, 0);
 	} else {
-		memctl->or1 = 0;
-		memctl->br1 = 0;
+		set_lbc_or(1, 0);
+		set_lbc_br(1, 0);
 	}
 
 	/*
 	 *  If bank 1 is equipped, bank 0 is mapped after bank 1
 	 */
-	memctl->or0 = ((-flash_info[1].size) & 0xffff8000) |
-		(CONFIG_SYS_OR0_PRELIM & 0x00007fff);
-	memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) |
-		(CONFIG_SYS_BR0_PRELIM & 0x00007fff);
+	set_lbc_or(0, ((-flash_info[1].size) & 0xffff8000) |
+		   (CONFIG_SYS_OR0_PRELIM & 0x00007fff));
+	set_lbc_br(0, gd->bd->bi_flashstart |
+		   (CONFIG_SYS_BR0_PRELIM & 0x00007fff));
+
 	/*
 	 * Re-check to get correct base address for bank 0
 	 */
@@ -341,7 +340,7 @@ int misc_init_r (void)
  */
 static void upmc_write (u_char addr, uint val)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	out_be32 (&lbc->mdr, val);
 
@@ -358,7 +357,7 @@ static void upmc_write (u_char addr, uint val)
 
 uint get_lbc_clock (void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	sys_info_t sys_info;
 	ulong clkdiv = lbc->lcrr & LCRR_CLKDIV;
 
@@ -386,7 +385,7 @@ uint get_lbc_clock (void)
 void local_bus_init (void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	uint lbc_mhz = get_lbc_clock ()  / 1000000;
 
 #ifdef CONFIG_MPC8548
@@ -502,10 +501,10 @@ void local_bus_init (void)
 	 * set if Local Bus Clock is > 83 MHz.
 	 */
 	if (lbc_mhz > 83)
-		out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD);
+		set_lbc_or(2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD);
 	else
-		out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN);
-	out_be32 (&lbc->br2, CONFIG_SYS_BR2_CAN);
+		set_lbc_or(2, CONFIG_SYS_OR2_CAN);
+	set_lbc_br(2, CONFIG_SYS_BR2_CAN);
 
 	/* LGPL4 is UPWAIT */
 	out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X);
diff --git a/board/xes/xpedite5170/xpedite5170.c b/board/xes/xpedite5170/xpedite5170.c
index f4231a9a7..58229418f 100644
--- a/board/xes/xpedite5170/xpedite5170.c
+++ b/board/xes/xpedite5170/xpedite5170.c
@@ -56,8 +56,6 @@ int checkboard(void)
  */
 static void flash_cs_fixup(void)
 {
-	immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	ccsr_lbc_t *lbc = &immap->im_lbc;
 	int flash_sel;
 
 	/*
@@ -70,11 +68,11 @@ static void flash_cs_fixup(void)
 	printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
 
 	if (flash_sel) {
-		out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM);
-		out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM);
+		set_lbc_br(0, CONFIG_SYS_BR1_PRELIM);
+		set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);
 
-		out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM);
-		out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM);
+		set_lbc_br(1, CONFIG_SYS_BR0_PRELIM);
+		set_lbc_or(1, CONFIG_SYS_OR0_PRELIM);
 	}
 }
 
diff --git a/board/xes/xpedite5200/xpedite5200.c b/board/xes/xpedite5200/xpedite5200.c
index 710977151..a2627f867 100644
--- a/board/xes/xpedite5200/xpedite5200.c
+++ b/board/xes/xpedite5200/xpedite5200.c
@@ -38,7 +38,7 @@ extern void ft_board_pci_setup(void *blob, bd_t *bd);
 
 int checkboard(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 	char *s;
 
@@ -65,7 +65,6 @@ int checkboard(void)
 
 static void flash_cs_fixup(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	int flash_sel;
 
 	/*
@@ -78,11 +77,11 @@ static void flash_cs_fixup(void)
 	printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
 
 	if (flash_sel) {
-		out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM);
-		out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM);
+		set_lbc_br(0, CONFIG_SYS_BR1_PRELIM);
+		set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);
 
-		out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM);
-		out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM);
+		set_lbc_br(1, CONFIG_SYS_BR0_PRELIM);
+		set_lbc_or(1, CONFIG_SYS_OR0_PRELIM);
 	}
 }
 
diff --git a/board/xes/xpedite5370/xpedite5370.c b/board/xes/xpedite5370/xpedite5370.c
index 48d9fc8c7..2a060c246 100644
--- a/board/xes/xpedite5370/xpedite5370.c
+++ b/board/xes/xpedite5370/xpedite5370.c
@@ -58,7 +58,6 @@ int checkboard(void)
 
 static void flash_cs_fixup(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	int flash_sel;
 
 	/*
@@ -71,11 +70,11 @@ static void flash_cs_fixup(void)
 	printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
 
 	if (flash_sel) {
-		out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM);
-		out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM);
+		set_lbc_br(0, CONFIG_SYS_BR1_PRELIM);
+		set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);
 
-		out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM);
-		out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM);
+		set_lbc_br(1, CONFIG_SYS_BR0_PRELIM);
+		set_lbc_or(1, CONFIG_SYS_OR0_PRELIM);
 	}
 }
 
diff --git a/boards.cfg b/boards.cfg
index d7c9c4699..8aab169aa 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -346,6 +346,7 @@ MPC8560ADS	powerpc	mpc85xx		mpc8560ads	freescale
 MPC8568MDS	powerpc	mpc85xx		mpc8568mds	freescale
 XPEDITE5200	powerpc	mpc85xx		xpedite5200	xes
 XPEDITE5370	powerpc	mpc85xx		xpedite5370	xes
+P1022DS		powerpc	mpc85xx		p1022ds		freescale
 sbc8641d	powerpc	mpc86xx
 MPC8610HPCD	powerpc	mpc86xx		mpc8610hpcd	freescale
 XPEDITE5170	powerpc	mpc86xx		xpedite5170	xes
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index 94b8d5869..908876ce4 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -33,6 +33,8 @@ extern void ppc4xx_reginfo(void);
 #include <mpc5xxx.h>
 #elif defined (CONFIG_MPC86xx)
 extern void mpc86xx_reginfo(void);
+#elif defined(CONFIG_MPC85xx)
+extern void mpc85xx_reginfo(void);
 #endif
 
 int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
@@ -183,6 +185,9 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #elif defined(CONFIG_MPC86xx)
 	mpc86xx_reginfo();
 
+#elif defined(CONFIG_MPC85xx)
+	mpc85xx_reginfo();
+
 #elif defined(CONFIG_BLACKFIN)
 	puts("\nSystem Configuration registers\n");
 
diff --git a/common/fdt_support.c b/common/fdt_support.c
index a8ac617da..4d87135cb 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -474,135 +474,6 @@ void fdt_fixup_ethernet(void *fdt)
 	}
 }
 
-#ifdef CONFIG_HAS_FSL_DR_USB
-void fdt_fixup_dr_usb(void *blob, bd_t *bd)
-{
-	char *mode;
-	char *type;
-	const char *compat = "fsl-usb2-dr";
-	const char *prop_mode = "dr_mode";
-	const char *prop_type = "phy_type";
-	int node_offset;
-	int err;
-
-	mode = getenv("usb_dr_mode");
-	type = getenv("usb_phy_type");
-	if (!mode && !type)
-		return;
-
-	node_offset = fdt_node_offset_by_compatible(blob, 0, compat);
-	if (node_offset < 0) {
-		printf("WARNING: could not find compatible node %s: %s.\n",
-			compat, fdt_strerror(node_offset));
-		return;
-	}
-
-	if (mode) {
-		err = fdt_setprop(blob, node_offset, prop_mode, mode,
-				  strlen(mode) + 1);
-		if (err < 0)
-			printf("WARNING: could not set %s for %s: %s.\n",
-			       prop_mode, compat, fdt_strerror(err));
-	}
-
-	if (type) {
-		err = fdt_setprop(blob, node_offset, prop_type, type,
-				  strlen(type) + 1);
-		if (err < 0)
-			printf("WARNING: could not set %s for %s: %s.\n",
-			       prop_type, compat, fdt_strerror(err));
-	}
-}
-#endif /* CONFIG_HAS_FSL_DR_USB */
-
-#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
-/*
- * update crypto node properties to a specified revision of the SEC
- * called with sec_rev == 0 if not on an mpc8xxxE processor
- */
-void fdt_fixup_crypto_node(void *blob, int sec_rev)
-{
-	const struct sec_rev_prop {
-		u32 sec_rev;
-		u32 num_channels;
-		u32 channel_fifo_len;
-		u32 exec_units_mask;
-		u32 descriptor_types_mask;
-	} sec_rev_prop_list [] = {
-		{ 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */
-		{ 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */
-		{ 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */
-		{ 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */
-		{ 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */
-		{ 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
-		{ 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
-	};
-	char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
-			    sizeof("fsl,secX.Y")];
-	int crypto_node, sec_idx, err;
-	char *p;
-	u32 val;
-
-	/* locate crypto node based on lowest common compatible */
-	crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0");
-	if (crypto_node == -FDT_ERR_NOTFOUND)
-		return;
-
-	/* delete it if not on an E-processor */
-	if (crypto_node > 0 && !sec_rev) {
-		fdt_del_node(blob, crypto_node);
-		return;
-	}
-
-	/* else we got called for possible uprev */
-	for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++)
-		if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev)
-			break;
-
-	if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) {
-		puts("warning: unknown SEC revision number\n");
-		return;
-	}
-
-	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels);
-	err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4);
-	if (err < 0)
-		printf("WARNING: could not set crypto property: %s\n",
-		       fdt_strerror(err));
-
-	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask);
-	err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4);
-	if (err < 0)
-		printf("WARNING: could not set crypto property: %s\n",
-		       fdt_strerror(err));
-
-	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask);
-	err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4);
-	if (err < 0)
-		printf("WARNING: could not set crypto property: %s\n",
-		       fdt_strerror(err));
-
-	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len);
-	err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4);
-	if (err < 0)
-		printf("WARNING: could not set crypto property: %s\n",
-		       fdt_strerror(err));
-
-	val = 0;
-	while (sec_idx >= 0) {
-		p = compat_strlist + val;
-		val += sprintf(p, "fsl,sec%d.%d",
-			(sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8,
-			sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1;
-		sec_idx--;
-	}
-	err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val);
-	if (err < 0)
-		printf("WARNING: could not set crypto property: %s\n",
-		       fdt_strerror(err));
-}
-#endif /* defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) */
-
 /* Resize the fdt to its actual size + a bit of padding */
 int fdt_resize(void *blob)
 {
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index 8255175d2..628bd5964 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -50,33 +50,61 @@ DECLARE_GLOBAL_DATA_PTR;
 #endif
 
 #ifdef CONFIG_FSL_CORENET
+#define LAW_BASE (CONFIG_SYS_FSL_CORENET_CCM_ADDR)
+#define LAWAR_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawar)
+#define LAWBARH_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawbarh)
+#define LAWBARL_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawbarl)
+#define LAWBAR_SHIFT 0
+#else
+#define LAW_BASE (CONFIG_SYS_IMMR + 0xc08)
+#define LAWAR_ADDR(x) ((u32 *)LAW_BASE + 8 * x + 2)
+#define LAWBAR_ADDR(x) ((u32 *)LAW_BASE + 8 * x)
+#define LAWBAR_SHIFT 12
+#endif
+
+
+static inline phys_addr_t get_law_base_addr(int idx)
+{
+#ifdef CONFIG_FSL_CORENET
+	return (phys_addr_t)
+		((u64)in_be32(LAWBARH_ADDR(idx)) << 32) |
+		in_be32(LAWBARL_ADDR(idx));
+#else
+	return (phys_addr_t)in_be32(LAWBAR_ADDR(idx)) << LAWBAR_SHIFT;
+#endif
+}
+
+static inline void set_law_base_addr(int idx, phys_addr_t addr)
+{
+#ifdef CONFIG_FSL_CORENET
+	out_be32(LAWBARL_ADDR(idx), addr & 0xffffffff);
+	out_be32(LAWBARH_ADDR(idx), (u64)addr >> 32);
+#else
+	out_be32(LAWBAR_ADDR(idx), addr >> LAWBAR_SHIFT);
+#endif
+}
+
 void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 {
-	volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR);
-
 	gd->used_laws |= (1 << idx);
 
-	out_be32(&ccm->law[idx].lawar, 0);
-	out_be32(&ccm->law[idx].lawbarh, ((u64)addr >> 32));
-	out_be32(&ccm->law[idx].lawbarl, addr & 0xffffffff);
-	out_be32(&ccm->law[idx].lawar, LAW_EN | ((u32)id << 20) | (u32)sz);
+	out_be32(LAWAR_ADDR(idx), 0);
+	set_law_base_addr(idx, addr);
+	out_be32(LAWAR_ADDR(idx), LAW_EN | ((u32)id << 20) | (u32)sz);
 
 	/* Read back so that we sync the writes */
-	in_be32(&ccm->law[idx].lawar);
+	in_be32(LAWAR_ADDR(idx));
 }
 
 void disable_law(u8 idx)
 {
-	volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR);
-
 	gd->used_laws &= ~(1 << idx);
 
-	out_be32(&ccm->law[idx].lawar, 0);
-	out_be32(&ccm->law[idx].lawbarh, 0);
-	out_be32(&ccm->law[idx].lawbarl, 0);
+	out_be32(LAWAR_ADDR(idx), 0);
+	set_law_base_addr(idx, 0);
 
 	/* Read back so that we sync the writes */
-	in_be32(&ccm->law[idx].lawar);
+	in_be32(LAWAR_ADDR(idx));
 
 	return;
 }
@@ -84,77 +112,20 @@ void disable_law(u8 idx)
 #ifndef CONFIG_NAND_SPL
 static int get_law_entry(u8 i, struct law_entry *e)
 {
-	volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR);
 	u32 lawar;
 
-	lawar = in_be32(&ccm->law[i].lawar);
+	lawar = in_be32(LAWAR_ADDR(i));
 
 	if (!(lawar & LAW_EN))
 		return 0;
 
-	e->addr = ((u64)in_be32(&ccm->law[i].lawbarh) << 32) |
-			in_be32(&ccm->law[i].lawbarl);
+	e->addr = get_law_base_addr(i);
 	e->size = lawar & 0x3f;
 	e->trgt_id = (lawar >> 20) & 0xff;
 
 	return 1;
 }
 #endif
-#else
-void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
-{
-	volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
-	volatile u32 *lawbar = base + 8 * idx;
-	volatile u32 *lawar = base + 8 * idx + 2;
-
-	gd->used_laws |= (1 << idx);
-
-	out_be32(lawar, 0);
-	out_be32(lawbar, addr >> 12);
-	out_be32(lawar, LAW_EN | ((u32)id << 20) | (u32)sz);
-
-	/* Read back so that we sync the writes */
-	in_be32(lawar);
-}
-
-void disable_law(u8 idx)
-{
-	volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
-	volatile u32 *lawbar = base + 8 * idx;
-	volatile u32 *lawar = base + 8 * idx + 2;
-
-	gd->used_laws &= ~(1 << idx);
-
-	out_be32(lawar, 0);
-	out_be32(lawbar, 0);
-
-	/* Read back so that we sync the writes */
-	in_be32(lawar);
-
-	return;
-}
-
-#ifndef CONFIG_NAND_SPL
-static int get_law_entry(u8 i, struct law_entry *e)
-{
-	volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
-	volatile u32 *lawbar = base + 8 * i;
-	volatile u32 *lawar = base + 8 * i + 2;
-	u32 temp;
-
-	temp = in_be32(lawar);
-
-	if (!(temp & LAW_EN))
-		return 0;
-
-	e->addr = (u64)in_be32(lawbar) << 12;
-	e->size = temp & 0x3f;
-	e->trgt_id = (temp >> 20) & 0xff;
-
-	return 1;
-}
-#endif
-#endif
 
 int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 {
@@ -216,17 +187,23 @@ struct law_entry find_law(phys_addr_t addr)
 
 void print_laws(void)
 {
-	volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
-	volatile u32 *lawbar = base;
-	volatile u32 *lawar = base + 2;
 	int i;
+	u32 lawar;
 
 	printf("\nLocal Access Window Configuration\n");
-	for(i = 0; i < FSL_HW_NUM_LAWS; i++) {
-		printf("\tLAWBAR%d : 0x%08x, LAWAR%d : 0x%08x\n",
-		       i, in_be32(lawbar), i, in_be32(lawar));
-		lawbar += 8;
-		lawar += 8;
+	for (i = 0; i < FSL_HW_NUM_LAWS; i++) {
+		lawar = in_be32(LAWAR_ADDR(i));
+#ifdef CONFIG_FSL_CORENET
+		printf("LAWBARH%02d: 0x%08x LAWBARL%02d: 0x%08x",
+		       i, in_be32(LAWBARH_ADDR(i)),
+		       i, in_be32(LAWBARL_ADDR(i)));
+#else
+		printf("LAWBAR%02d: 0x%08x", i, in_be32(LAWBAR_ADDR(i)));
+#endif
+		printf(" LAWAR0x%02d: 0x%08x\n", i, lawar);
+		printf("\t(EN: %d TGT: 0x%02x SIZE: ",
+		       (lawar & LAW_EN) ? 1 : 0, (lawar >> 20) & 0xff);
+		print_size(lawar_size(lawar), ")\n");
 	}
 
 	return;
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 146e9bf3c..acdb43112 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -75,7 +75,7 @@ struct fsl_elbc_ctrl {
 	struct fsl_elbc_mtd *chips[MAX_BANKS];
 
 	/* device info */
-	fsl_lbus_t *regs;
+	fsl_lbc_t *regs;
 	u8 __iomem *addr;        /* Address of assigned FCM buffer        */
 	unsigned int page;       /* Last page written to / read from      */
 	unsigned int read_bytes; /* Number of bytes read during command   */
@@ -171,7 +171,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	fsl_lbus_t *lbc = ctrl->regs;
+	fsl_lbc_t *lbc = ctrl->regs;
 	int buf_num;
 
 	ctrl->page = page_addr;
@@ -211,7 +211,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	fsl_lbus_t *lbc = ctrl->regs;
+	fsl_lbc_t *lbc = ctrl->regs;
 	long long end_tick;
 	u32 ltesr;
 
@@ -261,7 +261,7 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	fsl_lbus_t *lbc = ctrl->regs;
+	fsl_lbc_t *lbc = ctrl->regs;
 
 	if (priv->page_size) {
 		out_be32(&lbc->fir,
@@ -295,7 +295,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	fsl_lbus_t *lbc = ctrl->regs;
+	fsl_lbc_t *lbc = ctrl->regs;
 
 	ctrl->use_mdr = 0;
 
@@ -633,7 +633,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	fsl_lbus_t *lbc = ctrl->regs;
+	fsl_lbc_t *lbc = ctrl->regs;
 
 	if (ctrl->status != LTESR_CC)
 		return NAND_STATUS_FAIL;
@@ -697,11 +697,7 @@ static void fsl_elbc_ctrl_init(void)
 	if (!elbc_ctrl)
 		return;
 
-#ifdef CONFIG_MPC85xx
-	elbc_ctrl->regs = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR;
-#else
-	elbc_ctrl->regs = &((immap_t *)CONFIG_SYS_IMMR)->lbus;
-#endif
+	elbc_ctrl->regs = LBC_BASE_ADDR;
 
 	/* clear event registers */
 	out_be32(&elbc_ctrl->regs->ltesr, LTESR_NAND_MASK);
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 9a40adc35..524afa5c6 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -36,6 +36,7 @@
 #define CONFIG_MPC8313ERDB	1
 
 #define CONFIG_PCI
+#define CONFIG_FSL_ELBC 1
 
 #define CONFIG_MISC_INIT_R
 
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 6972fe8cd..f1b110b9d 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -197,6 +197,7 @@
 #define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
 #define CONFIG_SYS_LCRR_CLKDIV		LCRR_CLKDIV_2
 #define CONFIG_SYS_LBC_LBCR		0x00040000
+#define CONFIG_FSL_ELBC		1
 
 /*
  * FLASH on the Local Bus
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index b30d0e385..9092755c6 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -223,6 +223,7 @@
 #define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
 #define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_8
 #define CONFIG_SYS_LBC_LBCR		0x00000000
+#define CONFIG_FSL_ELBC		1
 
 /*
  * FLASH on the Local Bus
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 1654f46a4..79dadc4a5 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -246,6 +246,7 @@
 #define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
 #define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_8
 #define CONFIG_SYS_LBC_LBCR		0x00000000
+#define CONFIG_FSL_ELBC		1
 
 /*
  * FLASH on the Local Bus
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index da4313ac3..a014ad094 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2009,2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include "../board/freescale/common/ics307_clk.h"
+
 #ifdef CONFIG_MK_36BIT
 #define CONFIG_PHYS_64BIT	1
 #endif
@@ -70,15 +72,9 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
-#ifndef __ASSEMBLY__
-extern unsigned long get_board_sys_clk(unsigned long dummy);
-extern unsigned long get_board_ddr_clk(unsigned long dummy);
-#endif
-#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0) /* sysclk for MPC85xx */
-#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0)
+#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk() /* sysclk for MPC85xx */
+#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk()
 #define CONFIG_ICS307_REFCLK_HZ	33333000  /* ICS307 clock chip ref freq */
-#define CONFIG_GET_CLK_FROM_ICS307	  /* decode sysclk and ddrclk freq
-					     from ICS307 instead of switches */
 
 /*
  * These can be toggled for performance analysis, otherwise use default.
@@ -669,6 +665,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index 95ea27583..7daf934d0 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -294,6 +294,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index e945da2e6..ae4fba801 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -403,6 +403,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 799d9461f..faba35311 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -420,6 +420,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 3eb0049a0..fdd3597f7 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -462,6 +462,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 07a8e6126..5011e5a8b 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -401,6 +401,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 4a4a9eda8..98677e5f1 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -416,6 +416,7 @@
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 6973538a8..0cc2d4742 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -421,6 +421,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 0c43b2b0c..bb7bb47d6 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -539,6 +539,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 78b73695b..57c2f2f23 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ * Copyright 2007-2008,2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include "../board/freescale/common/ics307_clk.h"
+
 #ifdef CONFIG_MK_36BIT
 #define CONFIG_PHYS_64BIT
 #endif
@@ -53,15 +55,9 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
-#ifndef __ASSEMBLY__
-extern unsigned long get_board_sys_clk(unsigned long dummy);
-extern unsigned long get_board_ddr_clk(unsigned long dummy);
-#endif
-#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0) /* sysclk for MPC85xx */
-#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0) /* ddrclk for MPC85xx */
+#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk() /* sysclk for MPC85xx */
+#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk() /* ddrclk for MPC85xx */
 #define CONFIG_ICS307_REFCLK_HZ	33333000  /* ICS307 clock chip ref freq */
-#define CONFIG_GET_CLK_FROM_ICS307	  /* decode sysclk and ddrclk freq
-					     from ICS307 instead of switches */
 
 /*
  * These can be toggled for performance analysis, otherwise use default.
@@ -574,6 +570,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
new file mode 100644
index 000000000..b42b5d09f
--- /dev/null
+++ b/include/configs/P1022DS.h
@@ -0,0 +1,470 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ *          Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "../board/freescale/common/ics307_clk.h"
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE			/* BOOKE */
+#define CONFIG_E500			/* BOOKE e500 family */
+#define CONFIG_MPC85xx			/* MPC8540/60/55/41/48 */
+#define CONFIG_P1022
+#define CONFIG_P1022DS
+#define CONFIG_MP			/* support multiple processors */
+
+#define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */
+#define CONFIG_PCI			/* Enable PCI/PCIE */
+#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2			/* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE3			/* PCIE controler 3 (ULI bridge) */
+#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
+
+#define CONFIG_PHYS_64BIT
+#define CONFIG_ENABLE_36BIT_PHYS
+#define CONFIG_ADDR_MAP
+#define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
+
+#define CONFIG_FSL_LAW			/* Use common FSL init code */
+
+#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk()
+#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk()
+#define CONFIG_ICS307_REFCLK_HZ	33333000  /* ICS307 clock chip ref freq */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE
+#define CONFIG_BTB
+
+#define CONFIG_SYS_MEMTEST_START	0x00000000
+#define CONFIG_SYS_MEMTEST_END		0x7fffffff
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xffe00000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS		0xfffe00000ull
+#define CONFIG_SYS_IMMR			CONFIG_SYS_CCSRBAR
+
+#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR + 0x9000) /* pci0 */
+#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR + 0xa000) /* pci1 */
+#define CONFIG_SYS_PCIE3_ADDR		(CONFIG_SYS_CCSRBAR + 0xb000) /* pci2 */
+
+/* DDR Setup */
+#define CONFIG_DDR_SPD
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_FSL_DDR3
+
+#ifdef CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
+#endif
+
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
+
+/* I2C addresses of SPD EEPROMs */
+#define CONFIG_SYS_SPD_BUS_NUM		1
+#define SPD_EEPROM_ADDRESS1		0x51	/* CTLR 0 DIMM 0 */
+
+/*
+ * Memory map
+ *
+ * 0x0000_0000	0x7fff_ffff	DDR			2G Cacheable
+ * 0x8000_0000	0xdfff_ffff	PCI Express Mem		1.5G non-cacheable
+ * 0xffc0_0000	0xffc2_ffff	PCI IO range		192K non-cacheable
+ *
+ * Localbus cacheable (TBD)
+ * 0xXXXX_XXXX	0xXXXX_XXXX	SRAM			YZ M Cacheable
+ *
+ * Localbus non-cacheable
+ * 0xe000_0000	0xe80f_ffff	Promjet/free		128M non-cacheable
+ * 0xe800_0000	0xefff_ffff	FLASH			128M non-cacheable
+ * 0xffdf_0000	0xffdf_7fff	PIXIS			32K non-cacheable TLB0
+ * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K Cacheable TLB0
+ * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable
+ */
+
+/*
+ * Local Bus Definitions
+ */
+#define CONFIG_SYS_FLASH_BASE		0xe0000000 /* start of FLASH 128M */
+#define CONFIG_SYS_FLASH_BASE_PHYS	0xfe0000000ull
+
+#define CONFIG_FLASH_BR_PRELIM  \
+	(BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V)
+#define CONFIG_FLASH_OR_PRELIM	(OR_AM_128MB | 0xff7)
+
+#define CONFIG_SYS_BR0_PRELIM	CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
+#define CONFIG_SYS_OR0_PRELIM	CONFIG_FLASH_OR_PRELIM  /* NOR Options */
+
+#define CONFIG_SYS_BR1_PRELIM	\
+	(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_FLASH_OR_PRELIM
+
+#define CONFIG_SYS_FLASH_BANKS_LIST	\
+	{CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	2
+#define CONFIG_SYS_MAX_FLASH_SECT	1024
+
+#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE	/* start of monitor */
+
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_FSL_NGPIXIS
+#define PIXIS_BASE		0xffdf0000	/* PIXIS registers */
+#define PIXIS_BASE_PHYS		0xfffdf0000ull
+
+#define CONFIG_SYS_BR2_PRELIM	(BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR2_PRELIM	(OR_AM_32KB | 0x6ff7)
+
+#define PIXIS_LBMAP_SWITCH	7
+#define PIXIS_LBMAP_MASK	0xE0
+#define PIXIS_LBMAP_ALTBANK	0x20
+
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_END		0x00004000 /* End of used area in RAM */
+
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	\
+	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(6 * 1024 * 1024)
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
+
+#define CONFIG_SYS_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+#define CONFIG_FSL_DIU_FB
+#define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x10000)
+
+/* Video */
+/* #define CONFIG_VIDEO */
+#ifdef CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#endif
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_SPEED		400000
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES		{{0, 0x29}}
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
+
+/*
+ * I2C2 EEPROM
+ */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_EEPROM_BUS_NUM	1
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 1, Slot 2, tgtid 1, Base address a000 */
+#define CONFIG_SYS_PCIE1_MEM_VIRT	0xc0000000
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc40000000ull
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc20000
+#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc20000ull
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
+
+/* controller 2, direct to uli, tgtid 2, Base address 9000 */
+#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
+#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xfffc10000ull
+#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
+
+/* controller 3, Slot 1, tgtid 3, Base address b000 */
+#define CONFIG_SYS_PCIE3_MEM_VIRT	0x80000000
+#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc00000000ull
+#define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE3_IO_VIRT	0xffc00000
+#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE3_IO_PHYS	0xfffc00000ull
+#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
+
+#ifdef CONFIG_PCI
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#endif
+
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CONFIG_SYS_SATA_MAX_DEVICE	2
+#define CONFIG_SATA1
+#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
+#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
+#define CONFIG_SATA2
+#define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
+#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
+
+#ifdef CONFIG_FSL_SATA
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#endif
+
+#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+#define CONFIG_TSEC_ENET
+#ifdef CONFIG_TSEC_ENET
+
+#define CONFIG_TSECV2
+#define CONFIG_NET_MULTI
+
+#define CONFIG_MII			/* MII PHY management */
+#define CONFIG_TSEC1		1
+#define CONFIG_TSEC1_NAME	"eTSEC1"
+#define CONFIG_TSEC2		1
+#define CONFIG_TSEC2_NAME	"eTSEC2"
+
+#define TSEC1_PHY_ADDR		1
+#define TSEC2_PHY_ADDR		2
+
+#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+
+#define CONFIG_ETHPRIME		"eTSEC1"
+
+#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
+#endif
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+
+#define CONFIG_LOADS_ECHO
+#define CONFIG_SYS_LOADS_BAUD_CHANGE
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ERRATA
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+
+#ifdef CONFIG_PCI
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#endif
+
+/*
+ * USB
+ */
+#define CONFIG_USB_EHCI
+
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_CMD_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_FAT
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_HZ		1000
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_HOSTNAME		p1022ds
+#define CONFIG_ROOTPATH		/opt/nfsroot
+#define CONFIG_BOOTFILE		uImage
+#define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
+
+#define CONFIG_LOADADDR		1000000
+
+#define CONFIG_BOOTDELAY	10	/* -1 disables auto-boot */
+#define CONFIG_BOOTARGS
+
+#define CONFIG_BAUDRATE	115200
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"perf_mode=stable\0"						\
+	"memctl_intlv_ctl=2\0"						\
+	"netdev=eth0\0"							\
+	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
+	"tftpflash=tftpboot $loadaddr $uboot; "				\
+		"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
+		"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
+		"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
+		"protect on " MK_STR(TEXT_BASE) " +$filesize; "		\
+		"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
+	"consoledev=ttyS0\0"						\
+	"ramdiskaddr=2000000\0"						\
+	"ramdiskfile=uramdisk\0"  		      	        	\
+	"fdtaddr=c00000\0"	  			      		\
+	"fdtfile=p1022ds.dtb\0"	  					\
+	"bdev=sda3\0"		  			      		\
+	"diuregs=md e002c000 1d\0"			 		\
+	"dium=mw e002c01c\0" 						\
+	"diuerr=md e002c014 1\0" 					\
+	"othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 tty0\0" \
+	"monitor=0-DVI\0"
+
+#define CONFIG_HDBOOT					\
+	"setenv bootargs root=/dev/$bdev rw "		\
+	"console=$consoledev,$baudrate $othbootargs;"	\
+	"tftp $loadaddr $bootfile;"			\
+	"tftp $fdtaddr $fdtfile;"			\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_NFSBOOTCOMMAND						\
+	"setenv bootargs root=/dev/nfs rw "				\
+	"nfsroot=$serverip:$rootpath "					\
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=$consoledev,$baudrate $othbootargs;"			\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+	"setenv bootargs root=/dev/ram rw "				\
+	"console=$consoledev,$baudrate $othbootargs;"			\
+	"tftp $ramdiskaddr $ramdiskfile;"				\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND		CONFIG_RAMBOOTCOMMAND
+
+#endif
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index b89173078..3cebbab53 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -74,6 +74,7 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
+#define CONFIG_E1000		1	/*  E1000 pci Ethernet card*/
 #ifndef __ASSEMBLY__
 extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
@@ -84,6 +85,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_MP
 #endif
 
+#define CONFIG_HWCONFIG
+
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
@@ -475,6 +478,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_NET
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 66be725c8..569da4f64 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -27,6 +27,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include "../board/freescale/common/ics307_clk.h"
+
 #ifdef CONFIG_MK_36BIT
 #define CONFIG_PHYS_64BIT
 #endif
@@ -54,17 +56,9 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
-#ifndef __ASSEMBLY__
-extern unsigned long calculate_board_sys_clk(unsigned long dummy);
-extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
-/* extern unsigned long get_board_sys_clk(unsigned long dummy); */
-/* extern unsigned long get_board_ddr_clk(unsigned long dummy); */
-#endif
-#define CONFIG_SYS_CLK_FREQ	calculate_board_sys_clk(0) /* sysclk for MPC85xx */
-#define CONFIG_DDR_CLK_FREQ	calculate_board_ddr_clk(0) /* ddrclk for MPC85xx */
+#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk() /* sysclk for MPC85xx */
+#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk() /* ddrclk for MPC85xx */
 #define CONFIG_ICS307_REFCLK_HZ	33333000  /* ICS307 clock chip ref freq */
-#define CONFIG_GET_CLK_FROM_ICS307	  /* decode sysclk and ddrclk freq
-					     from ICS307 instead of switches */
 
 /*
  * These can be toggled for performance analysis, otherwise use default.
@@ -553,6 +547,7 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index 4b9bcca79..7426bcadf 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -326,6 +326,7 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 1db20bcce..0bd28fc8c 100644
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -325,6 +325,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 1989e5aea..5d424dd75 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -380,6 +380,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index eb8657b6b..70b7489ab 100644
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -37,6 +37,7 @@
 #define CONFIG_MPC8313			1
 
 #define CONFIG_PCI
+#define CONFIG_FSL_ELBC			1
 
 #define CONFIG_MISC_INIT_R
 
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index d44fb07cc..90abe14f2 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -593,6 +593,7 @@
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h
index 1a56c6076..df5ef7848 100644
--- a/include/configs/XPEDITE5200.h
+++ b/include/configs/XPEDITE5200.h
@@ -338,6 +338,7 @@
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SNTP
+#define CONFIG_CMD_REGINFO
 
 /*
  * Miscellaneous configurable options
diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h
index 7fd3668b2..1d6091caf 100644
--- a/include/configs/XPEDITE5370.h
+++ b/include/configs/XPEDITE5370.h
@@ -47,6 +47,7 @@
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
+#define CONFIG_FSL_ELBC		1
 
 /*
  * Multicore config
@@ -396,6 +397,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_SNTP
+#define CONFIG_CMD_REGINFO
 
 /*
  * Miscellaneous configurable options
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index aeac2dea3..3f4056e82 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -487,6 +487,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index dab4f801d..53d06ed69 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -382,6 +382,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 89f7cc4a1..ad7010900 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -355,6 +355,7 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_USB
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index 86b231ca8..891d2bfb3 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -321,6 +321,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_SAVEENV
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 2783f9e04..363f7b473 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -353,6 +353,7 @@
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SNTP
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 9a453af34..fc16159eb 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -59,7 +59,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd);
 static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
 #endif /* CONFIG_HAS_FSL_DR_USB */
 
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx)
+#if defined(CONFIG_SYS_FSL_SEC_COMPAT)
 void fdt_fixup_crypto_node(void *blob, int sec_rev);
 #else
 static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
diff --git a/include/mpc85xx.h b/include/mpc85xx.h
index a4d4d6552..2495b99c3 100644
--- a/include/mpc85xx.h
+++ b/include/mpc85xx.h
@@ -6,8 +6,6 @@
 #ifndef	__MPC85xx_H__
 #define __MPC85xx_H__
 
-#include <asm/fsl_lbc.h>
-
 /* define for common ppc_asm.tmpl */
 #define EXC_OFF_SYS_RESET	0x100	/* System reset */
 #define _START_OFFSET		0
diff --git a/nand_spl/board/freescale/mpc8536ds/nand_boot.c b/nand_spl/board/freescale/mpc8536ds/nand_boot.c
index af29dc278..5a0a0c799 100644
--- a/nand_spl/board/freescale/mpc8536ds/nand_boot.c
+++ b/nand_spl/board/freescale/mpc8536ds/nand_boot.c
@@ -34,12 +34,11 @@ void board_init_f(ulong bootflag)
 	int px_spd;
 	u32 plat_ratio, bus_clk, sys_clk;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-	ccsr_lbc_t *lbc = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR;
 
 #if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
 	/* for FPGA */
-	out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM);
-	out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM);
+	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
+	set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
 #else
 #error CONFIG_SYS_BR3_PRELIM, CONFIG_SYS_OR3_PRELIM must be defined
 #endif
diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c
index ff47d5531..9547d4423 100644
--- a/nand_spl/nand_boot_fsl_elbc.c
+++ b/nand_spl/nand_boot_fsl_elbc.c
@@ -32,7 +32,7 @@
 
 static void nand_wait(void)
 {
-	fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000);
+	fsl_lbc_t *regs = LBC_BASE_ADDR;
 
 	for (;;) {
 		uint32_t status = in_be32(&regs->ltesr);
@@ -49,7 +49,7 @@ static void nand_wait(void)
 
 static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
 {
-	fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000);
+	fsl_lbc_t *regs = LBC_BASE_ADDR;
 	uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
 	int large = in_be32(&regs->bank[0].or) & OR_FCM_PGS;
 	int block_shift = large ? 17 : 14;