Merge remote branch 'origin/master' into next

This commit is contained in:
Wolfgang Denk 2010-03-21 22:45:36 +01:00
commit b46b353b90
43 changed files with 65 additions and 35 deletions

19
README
View File

@ -3005,7 +3005,9 @@ environment. As long as you don't save the environment you are
working with an in-memory copy. In case the Flash area containing the
environment is erased by accident, a default environment is provided.
Some configuration options can be set using Environment Variables:
Some configuration options can be set using Environment Variables.
List of environment variables (most likely not complete):
baudrate - see CONFIG_BAUDRATE
@ -3117,7 +3119,7 @@ Some configuration options can be set using Environment Variables:
available network interfaces.
It just stays at the currently selected interface.
netretry - When set to "no" each network operation will
netretry - When set to "no" each network operation will
either succeed or fail without retrying.
When set to "once" the network operation will
fail when all the available network interfaces
@ -3133,7 +3135,18 @@ Some configuration options can be set using Environment Variables:
tftpdstport - If this is set, the value is used for TFTP's UDP
destination port instead of the Well Know Port 69.
vlan - When set to a value < 4095 the traffic over
tftpblocksize - Block size to use for TFTP transfers; if not set,
we use the TFTP server's default block size
tftptimeout - Retransmission timeout for TFTP packets (in milli-
seconds, minimum value is 1000 = 1 second). Defines
when a packet is considered to be lost so it has to
be retransmitted. The default is 5000 = 5 seconds.
Lowering this value may make downloads succeed
faster in networks with high packet loss rates or
with unreliable TFTP servers.
vlan - When set to a value < 4095 the traffic over
Ethernet is encapsulated/received over 802.1q
VLAN tagged frames.

0
board/spear/common/spr_lowlevel_init.S Executable file → Normal file
View File

0
board/spear/common/spr_misc.c Executable file → Normal file
View File

0
board/spear/spear300/Makefile Executable file → Normal file
View File

0
board/spear/spear300/config.mk Executable file → Normal file
View File

0
board/spear/spear300/spear300.c Executable file → Normal file
View File

0
board/spear/spear310/Makefile Executable file → Normal file
View File

0
board/spear/spear310/config.mk Executable file → Normal file
View File

0
board/spear/spear310/spear310.c Executable file → Normal file
View File

0
board/spear/spear320/Makefile Executable file → Normal file
View File

0
board/spear/spear320/config.mk Executable file → Normal file
View File

0
board/spear/spear320/spear320.c Executable file → Normal file
View File

0
board/spear/spear600/Makefile Executable file → Normal file
View File

0
board/spear/spear600/config.mk Executable file → Normal file
View File

0
board/spear/spear600/spear600.c Executable file → Normal file
View File

View File

@ -136,7 +136,7 @@ int do_mmcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(mmcinfo, 2, 0, do_mmcinfo,
"mmcinfo <dev num>-- display MMC info\n",
"mmcinfo <dev num>-- display MMC info",
""
);

View File

@ -659,10 +659,14 @@ int console_init_r(void)
#ifdef CONFIG_SPLASH_SCREEN
/*
* suppress all output if splash screen is enabled and we have
* a bmp to display
* a bmp to display. We redirect the output from frame buffer
* console to serial console in this case or suppress it if
* "silent" mode was requested.
*/
if (getenv("splashimage") != NULL)
gd->flags |= GD_FLG_SILENT;
if (getenv("splashimage") != NULL) {
if (!(gd->flags & GD_FLG_SILENT))
outputdev = search_device (DEV_FLAGS_OUTPUT, "serial");
}
#endif
/* Scan devices looking for input and output devices */

0
cpu/arm926ejs/spear/Makefile Executable file → Normal file
View File

0
cpu/arm926ejs/spear/reset.c Executable file → Normal file
View File

0
cpu/arm926ejs/spear/timer.c Executable file → Normal file
View File

0
cpu/arm926ejs/versatile/timer.c Executable file → Normal file
View File

View File

@ -145,10 +145,10 @@ void *video_hw_init(void)
struct fb_info *info;
if (mpc5121_diu_init() < 0)
return;
return NULL;
/* fill in Graphic device struct */
sprintf(pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz",
sprintf(pGD->modeIdent, "%dx%dx%d %dkHz %dHz",
xres, yres, 32, 64, 60);
pGD->frameAdrs = (unsigned int)fsl_fb_open(&info);

0
drivers/i2c/Makefile Executable file → Normal file
View File

0
drivers/i2c/spr_i2c.c Executable file → Normal file
View File

View File

@ -136,14 +136,14 @@ static void mxcmci_softreset(struct mxcmci_host *host)
int i;
/* reset sequence */
writew(STR_STP_CLK_RESET, &host->base->str_stp_clk);
writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK,
writel(STR_STP_CLK_RESET, &host->base->str_stp_clk);
writel(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK,
&host->base->str_stp_clk);
for (i = 0; i < 8; i++)
writew(STR_STP_CLK_START_CLK, &host->base->str_stp_clk);
writel(STR_STP_CLK_START_CLK, &host->base->str_stp_clk);
writew(0xff, &host->base->res_to);
writel(0xff, &host->base->res_to);
}
static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
@ -154,8 +154,8 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
host->data = data;
writew(nob, &host->base->nob);
writew(blksz, &host->base->blk_len);
writel(nob, &host->base->nob);
writel(blksz, &host->base->blk_len);
host->datasize = datasize;
}
@ -185,9 +185,9 @@ static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_cmd *cmd,
return -EINVAL;
}
writew(cmd->cmdidx, &host->base->cmd);
writel(cmd->cmdidx, &host->base->cmd);
writel(cmd->cmdarg, &host->base->arg);
writew(cmdat, &host->base->cmd_dat_cont);
writel(cmdat, &host->base->cmd_dat_cont);
return 0;
}
@ -247,14 +247,14 @@ static int mxcmci_read_response(struct mxcmci_host *host, unsigned int stat)
if (cmd->resp_type & MMC_RSP_PRESENT) {
if (cmd->resp_type & MMC_RSP_136) {
for (i = 0; i < 4; i++) {
a = readw(&host->base->res_fifo);
b = readw(&host->base->res_fifo);
a = readl(&host->base->res_fifo) & 0xFFFF;
b = readl(&host->base->res_fifo) & 0xFFFF;
resp[i] = a << 16 | b;
}
} else {
a = readw(&host->base->res_fifo);
b = readw(&host->base->res_fifo);
c = readw(&host->base->res_fifo);
a = readl(&host->base->res_fifo) & 0xFFFF;
b = readl(&host->base->res_fifo) & 0xFFFF;
c = readl(&host->base->res_fifo) & 0xFFFF;
resp[0] = a << 24 | b << 8 | c >> 8;
}
}
@ -445,7 +445,7 @@ static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
prescaler <<= 1;
}
writew((prescaler << 4) | divider, &host->base->clk_rate);
writel((prescaler << 4) | divider, &host->base->clk_rate);
}
static void mxcmci_set_ios(struct mmc *mmc)
@ -458,9 +458,9 @@ static void mxcmci_set_ios(struct mmc *mmc)
if (mmc->clock) {
mxcmci_set_clk_rate(host, mmc->clock);
writew(STR_STP_CLK_START_CLK, &host->base->str_stp_clk);
writel(STR_STP_CLK_START_CLK, &host->base->str_stp_clk);
} else {
writew(STR_STP_CLK_STOP_CLK, &host->base->str_stp_clk);
writel(STR_STP_CLK_STOP_CLK, &host->base->str_stp_clk);
}
host->clock = mmc->clock;
@ -472,7 +472,7 @@ static int mxcmci_init(struct mmc *mmc)
mxcmci_softreset(host);
host->rev_no = readw(&host->base->rev_no);
host->rev_no = readl(&host->base->rev_no);
if (host->rev_no != 0x400) {
printf("wrong rev.no. 0x%08x. aborting.\n",
host->rev_no);
@ -480,7 +480,7 @@ static int mxcmci_init(struct mmc *mmc)
}
/* recommended in data sheet */
writew(0x2db4, &host->base->read_to);
writel(0x2db4, &host->base->read_to);
writel(0, &host->base->int_cntr);

0
drivers/mtd/Makefile Executable file → Normal file
View File

0
drivers/mtd/nand/spr_nand.c Executable file → Normal file
View File

0
drivers/mtd/spr_smi.c Executable file → Normal file
View File

View File

@ -388,7 +388,7 @@ int pci_hose_config_device(struct pci_controller *hose,
pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0);
for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_5; bar += 4) {
for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_5; bar += 4) {
pci_hose_write_config_dword (hose, dev, bar, 0xffffffff);
pci_hose_read_config_dword (hose, dev, bar, &bar_response);

0
drivers/serial/usbtty.h Executable file → Normal file
View File

0
drivers/usb/gadget/Makefile Executable file → Normal file
View File

0
drivers/usb/gadget/spr_udc.c Executable file → Normal file
View File

View File

@ -80,7 +80,7 @@ typedef struct at91_matrix {
u32 mrcr; /* 0x100 Master Remap Control */
u32 reserve4[3];
#if defined(CONFIG_AT91SAM9G45)
u32 ccr[52] /* 0x110 - 0x1E0 Chip Configuration */
u32 ccr[52]; /* 0x110 - 0x1E0 Chip Configuration */
u32 womr; /* 0x1E4 Write Protect Mode */
u32 wpsr; /* 0x1E8 Write Protect Status */
u32 resg45_1[10];

0
include/asm-arm/arch-spear/spr_gpt.h Executable file → Normal file
View File

0
include/asm-arm/arch-spear/spr_i2c.h Executable file → Normal file
View File

0
include/asm-arm/arch-spear/spr_smi.h Executable file → Normal file
View File

0
include/asm-arm/arch-spear/spr_xloader_table.h Executable file → Normal file
View File

0
include/configs/spear3xx.h Executable file → Normal file
View File

0
include/configs/spear6xx.h Executable file → Normal file
View File

0
include/usb/spr_udc.h Executable file → Normal file
View File

View File

@ -163,7 +163,7 @@ const uint32_t * ZEXPORT get_crc_table()
#endif
/* ========================================================================= */
# ifdef __LITTLE_ENDIAN
# if __BYTE_ORDER == __LITTLE_ENDIAN
# define DO_CRC(x) crc = tab[(crc ^ (x)) & 255] ^ (crc >> 8)
# else
# define DO_CRC(x) crc = tab[((crc >> 24) ^ (x)) & 255] ^ (crc << 8)

0
lib_m68k/bootm.c Executable file → Normal file
View File

View File

@ -211,7 +211,7 @@ TftpSend (void)
pkt += 5 /*strlen("octet")*/ + 1;
strcpy ((char *)pkt, "timeout");
pkt += 7 /*strlen("timeout")*/ + 1;
sprintf((char *)pkt, "%lu", TIMEOUT / 1000);
sprintf((char *)pkt, "%lu", TftpTimeoutMSecs / 1000);
debug("send option \"timeout %s\"\n", (char *)pkt);
pkt += strlen((char *)pkt) + 1;
#ifdef CONFIG_TFTP_TSIZE
@ -413,7 +413,6 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len)
}
TftpLastBlock = TftpBlock;
TftpTimeoutMSecs = TIMEOUT;
TftpTimeoutCountMax = TIMEOUT_COUNT;
NetSetTimeout (TftpTimeoutMSecs, TftpTimeout);
@ -528,10 +527,25 @@ TftpStart (void)
{
char *ep; /* Environment pointer */
/* Allow the user to choose tftpblocksize */
/*
* Allow the user to choose TFTP blocksize and timeout.
* TFTP protocol has a minimal timeout of 1 second.
*/
if ((ep = getenv("tftpblocksize")) != NULL)
TftpBlkSizeOption = simple_strtol(ep, NULL, 10);
debug("tftp block size is %i\n", TftpBlkSizeOption);
if ((ep = getenv("tftptimeout")) != NULL)
TftpTimeoutMSecs = simple_strtol(ep, NULL, 10);
if (TftpTimeoutMSecs < 1000) {
printf("TFTP timeout (%ld ms) too low, "
"set minimum = 1000 ms\n",
TftpTimeoutMSecs);
TftpTimeoutMSecs = 1000;
}
debug("TFTP blocksize = %i, timeout = %ld ms\n",
TftpBlkSizeOption, TftpTimeoutMSecs);
TftpServerIP = NetServerIP;
if (BootFile[0] == '\0') {
@ -588,7 +602,6 @@ TftpStart (void)
puts ("Loading: *\b");
TftpTimeoutMSecs = TftpRRQTimeoutMSecs;
TftpTimeoutCountMax = TftpRRQTimeoutCountMax;
NetSetTimeout (TftpTimeoutMSecs, TftpTimeout);