Add support for MicroSys PM856 board
Patch by Josef Wagner, 03 Aug 2005
This commit is contained in:
Wolfgang Denk
parent
992b402bbf
commit
b20d00328c
|
|
@ -2,6 +2,9 @@
|
|||
Changes for U-Boot 1.1.3:
|
||||
======================================================================
|
||||
|
||||
* Add support for MicroSys PM856 board
|
||||
Patch by Josef Wagner, 03 Aug 2005
|
||||
|
||||
* Minor fixes to PM854 board
|
||||
Patch by Josef Wagner, 03 Aug 2005
|
||||
|
||||
|
|
@ -12,7 +15,7 @@ Changes for U-Boot 1.1.3:
|
|||
routed to the Watchdog handler
|
||||
Patch by Eugene Surovegin, 18 Jun 2005
|
||||
|
||||
* (re)enabled scsi commands do_scsi() and do_scsiboot()
|
||||
* (re)enabled scsi commands do_scsi() and do_scsiboot()
|
||||
Patch by Denis Peter, 06 Dec 2004
|
||||
|
||||
* Fix endianess problem in TFTP / NFS default filenames
|
||||
|
|
|
|||
4
MAKEALL
4
MAKEALL
|
|
@ -113,8 +113,8 @@ LIST_8260=" \
|
|||
|
||||
LIST_85xx=" \
|
||||
MPC8540ADS MPC8541CDS MPC8555CDS MPC8560ADS \
|
||||
PM854 sbc8540 sbc8560 stxgp3 \
|
||||
TQM8540 \
|
||||
PM854 PM856 sbc8540 sbc8560 \
|
||||
stxgp3 TQM8540 \
|
||||
"
|
||||
|
||||
#########################################################################
|
||||
|
|
|
|||
3
Makefile
3
Makefile
|
|
@ -1211,6 +1211,9 @@ MPC8555CDS_config: unconfig
|
|||
PM854_config: unconfig
|
||||
@./mkconfig $(@:_config=) ppc mpc85xx pm854
|
||||
|
||||
PM856_config: unconfig
|
||||
@./mkconfig $(@:_config=) ppc mpc85xx pm856
|
||||
|
||||
sbc8540_config \
|
||||
sbc8540_33_config \
|
||||
sbc8540_66_config: unconfig
|
||||
|
|
|
|||
|
|
@ -0,0 +1,48 @@
|
|||
#
|
||||
# (C) Copyright 2001
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = lib$(BOARD).a
|
||||
|
||||
OBJS := $(BOARD).o
|
||||
SOBJS := init.o
|
||||
#SOBJS :=
|
||||
|
||||
$(LIB): $(OBJS) $(SOBJS)
|
||||
$(AR) crv $@ $(OBJS)
|
||||
|
||||
clean:
|
||||
rm -f $(OBJS) $(SOBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak .depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
|
||||
$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
|
||||
|
||||
-include .depend
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
# Copyright 2004 Freescale Semiconductor.
|
||||
# Modified by Xianghua Xiao, X.Xiao@motorola.com
|
||||
# (C) Copyright 2002,2003 Motorola Inc.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
#
|
||||
# PM856 board
|
||||
# default CCARBAR is at 0xff700000
|
||||
# assume U-Boot is less than 0.5MB
|
||||
#
|
||||
TEXT_BASE = 0xfff80000
|
||||
|
||||
PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
|
||||
PLATFORM_CPPFLAGS += -DCONFIG_MPC8560=1
|
||||
PLATFORM_CPPFLAGS += -DCONFIG_E500=1
|
||||
|
|
@ -0,0 +1,263 @@
|
|||
/*
|
||||
* Copyright 2004 Freescale Semiconductor.
|
||||
* Copyright (C) 2002,2003, Motorola Inc.
|
||||
* Xianghua Xiao <X.Xiao@motorola.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <ppc_asm.tmpl>
|
||||
#include <ppc_defs.h>
|
||||
#include <asm/cache.h>
|
||||
#include <asm/mmu.h>
|
||||
#include <config.h>
|
||||
#include <mpc85xx.h>
|
||||
|
||||
|
||||
/*
|
||||
* TLB0 and TLB1 Entries
|
||||
*
|
||||
* Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
|
||||
* However, CCSRBAR is then relocated to CFG_CCSRBAR right after
|
||||
* these TLB entries are established.
|
||||
*
|
||||
* The TLB entries for DDR are dynamically setup in spd_sdram()
|
||||
* and use TLB1 Entries 8 through 15 as needed according to the
|
||||
* size of DDR memory.
|
||||
*
|
||||
* MAS0: tlbsel, esel, nv
|
||||
* MAS1: valid, iprot, tid, ts, tsize
|
||||
* MAS2: epn, sharen, x0, x1, w, i, m, g, e
|
||||
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
|
||||
*/
|
||||
|
||||
#define entry_start \
|
||||
mflr r1 ; \
|
||||
bl 0f ;
|
||||
|
||||
#define entry_end \
|
||||
0: mflr r0 ; \
|
||||
mtlr r1 ; \
|
||||
blr ;
|
||||
|
||||
|
||||
.section .bootpg, "ax"
|
||||
.globl tlb1_entry
|
||||
tlb1_entry:
|
||||
entry_start
|
||||
|
||||
/*
|
||||
* Number of TLB0 and TLB1 entries in the following table
|
||||
*/
|
||||
.long 13
|
||||
|
||||
#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
|
||||
/*
|
||||
* TLB0 4K Non-cacheable, guarded
|
||||
* 0xff700000 4K Initial CCSRBAR mapping
|
||||
*
|
||||
* This ends up at a TLB0 Index==0 entry, and must not collide
|
||||
* with other TLB0 Entries.
|
||||
*/
|
||||
.long TLB1_MAS0(0, 0, 0)
|
||||
.long TLB1_MAS1(1, 0, 0, 0, 0)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
|
||||
#else
|
||||
#error("Update the number of table entries in tlb1_entry")
|
||||
#endif
|
||||
|
||||
/*
|
||||
* TLB0 16K Cacheable, non-guarded
|
||||
* 0xd001_0000 16K Temporary Global data for initialization
|
||||
*
|
||||
* Use four 4K TLB0 entries. These entries must be cacheable
|
||||
* as they provide the bootstrap memory before the memory
|
||||
* controler and real memory have been configured.
|
||||
*
|
||||
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
|
||||
* and must not collide with other TLB0 entries.
|
||||
*/
|
||||
.long TLB1_MAS0(0, 0, 0)
|
||||
.long TLB1_MAS1(1, 0, 0, 0, 0)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
|
||||
0,0,0,0,0,0,0,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
|
||||
0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
.long TLB1_MAS0(0, 0, 0)
|
||||
.long TLB1_MAS1(1, 0, 0, 0, 0)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
|
||||
0,0,0,0,0,0,0,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
|
||||
0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
.long TLB1_MAS0(0, 0, 0)
|
||||
.long TLB1_MAS1(1, 0, 0, 0, 0)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
|
||||
0,0,0,0,0,0,0,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
|
||||
0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
.long TLB1_MAS0(0, 0, 0)
|
||||
.long TLB1_MAS1(1, 0, 0, 0, 0)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
|
||||
0,0,0,0,0,0,0,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
|
||||
0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
|
||||
/*
|
||||
* TLB 0: 64M Non-cacheable, guarded
|
||||
* 0xfc000000 64M FLASH (8,16,32 or 64 MB)
|
||||
* Out of reset this entry is only 4K.
|
||||
*/
|
||||
.long TLB1_MAS0(1, 0, 0)
|
||||
.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(0xfc000000), 0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(0xfc000000), 0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
/*
|
||||
* TLB 1: 256M Non-cacheable, guarded
|
||||
* 0x80000000 256M PCI1 MEM First half
|
||||
*/
|
||||
.long TLB1_MAS0(1, 1, 0)
|
||||
.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
/*
|
||||
* TLB 2: 256M Non-cacheable, guarded
|
||||
* 0x90000000 256M PCI1 MEM Second half
|
||||
*/
|
||||
.long TLB1_MAS0(1, 2, 0)
|
||||
.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
|
||||
0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
|
||||
0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
/*
|
||||
* TLB 3: 256M Non-cacheable, guarded
|
||||
* 0xc0000000 256M Rapid IO MEM First half
|
||||
*/
|
||||
.long TLB1_MAS0(1, 3, 0)
|
||||
.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
/*
|
||||
* TLB 4: 256M Non-cacheable, guarded
|
||||
* 0xd0000000 256M Rapid IO MEM Second half
|
||||
*/
|
||||
.long TLB1_MAS0(1, 4, 0)
|
||||
.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000),
|
||||
0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000),
|
||||
0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
/*
|
||||
* TLB 5: 64M Non-cacheable, guarded
|
||||
* 0xe000_0000 1M CCSRBAR
|
||||
* 0xe200_0000 16M PCI1 IO
|
||||
*/
|
||||
.long TLB1_MAS0(1, 5, 0)
|
||||
.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
/*
|
||||
* TLB 6: 64M Cacheable, non-guarded
|
||||
* 0xf000_0000 64M LBC SDRAM
|
||||
*/
|
||||
.long TLB1_MAS0(1, 6, 0)
|
||||
.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
/*
|
||||
* TLB 7: 256M DDR
|
||||
* 0x00000000 256M DDR System memory
|
||||
* Without SPD EEPROM configured DDR, this must be setup manually.
|
||||
* Make sure the TLB count at the top of this table is correct.
|
||||
* Likely it needs to be increased by two for these entries.
|
||||
*/
|
||||
|
||||
.long TLB1_MAS0(1, 7, 0)
|
||||
.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
|
||||
.long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,0,0,0)
|
||||
.long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
|
||||
#endif
|
||||
|
||||
entry_end
|
||||
|
||||
/*
|
||||
* LAW(Local Access Window) configuration:
|
||||
*
|
||||
* 0x0000_0000 0x7fff_ffff DDR 2G
|
||||
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
|
||||
* 0xc000_0000 0xdfff_ffff RapidIO 512M
|
||||
* 0xe000_0000 0xe000_ffff CCSR 1M
|
||||
* 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
|
||||
* 0xf000_0000 0xf7ff_ffff SDRAM 128M
|
||||
* 0xf800_0000 0xf80f_ffff BCSR 1M
|
||||
* 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M
|
||||
*
|
||||
* Notes:
|
||||
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
|
||||
* If flash is 8M at default position (last 8M), no LAW needed.
|
||||
*/
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
|
||||
#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_256M))
|
||||
#else
|
||||
#define LAWBAR0 0
|
||||
#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
|
||||
#endif
|
||||
|
||||
#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
|
||||
#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
|
||||
|
||||
/*
|
||||
* This is not so much the SDRAM map as it is the whole localbus map.
|
||||
*/
|
||||
#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
|
||||
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
|
||||
|
||||
#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
|
||||
#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
|
||||
|
||||
/*
|
||||
* Rapid IO at 0xc000_0000 for 512 M
|
||||
*/
|
||||
#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
|
||||
#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
|
||||
|
||||
|
||||
.section .bootpg, "ax"
|
||||
.globl law_entry
|
||||
law_entry:
|
||||
entry_start
|
||||
.long 0x05
|
||||
.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
|
||||
.long LAWBAR4,LAWAR4
|
||||
entry_end
|
||||
|
|
@ -0,0 +1,449 @@
|
|||
/*
|
||||
* Copyright 2004 Freescale Semiconductor.
|
||||
* (C) Copyright 2003,Motorola Inc.
|
||||
* Xianghua Xiao, (X.Xiao@motorola.com)
|
||||
*
|
||||
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
|
||||
#include <common.h>
|
||||
#include <pci.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/immap_85xx.h>
|
||||
#include <ioports.h>
|
||||
#include <spd.h>
|
||||
#include <miiphy.h>
|
||||
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
extern void ddr_enable_ecc(unsigned int dram_size);
|
||||
#endif
|
||||
|
||||
extern long int spd_sdram(void);
|
||||
|
||||
void local_bus_init(void);
|
||||
long int fixed_sdram(void);
|
||||
|
||||
/*
|
||||
* I/O Port configuration table
|
||||
*
|
||||
* if conf is 1, then that port pin will be configured at boot time
|
||||
* according to the five values podr/pdir/ppar/psor/pdat for that entry
|
||||
*/
|
||||
|
||||
const iop_conf_t iop_conf_tab[4][32] = {
|
||||
|
||||
/* Port A configuration */
|
||||
{ /* conf ppar psor pdir podr pdat */
|
||||
/* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
|
||||
/* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
|
||||
/* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
|
||||
/* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */
|
||||
/* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */
|
||||
/* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */
|
||||
/* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
|
||||
/* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
|
||||
/* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
|
||||
/* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
|
||||
/* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
|
||||
/* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
|
||||
/* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
|
||||
/* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
|
||||
/* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
|
||||
/* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
|
||||
/* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
|
||||
/* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
|
||||
/* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
|
||||
/* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
|
||||
/* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
|
||||
/* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
|
||||
/* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */
|
||||
/* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */
|
||||
/* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
|
||||
/* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */
|
||||
/* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
|
||||
/* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
|
||||
/* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
|
||||
/* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
|
||||
/* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* FREERUN */
|
||||
/* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
|
||||
},
|
||||
|
||||
/* Port B configuration */
|
||||
{ /* conf ppar psor pdir podr pdat */
|
||||
/* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
|
||||
/* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
|
||||
/* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
|
||||
/* PB28 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
|
||||
/* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
|
||||
/* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
|
||||
/* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
|
||||
/* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
|
||||
/* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
|
||||
/* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
|
||||
/* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
|
||||
/* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
|
||||
/* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
|
||||
/* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
|
||||
/* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
|
||||
/* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
|
||||
/* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
|
||||
/* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
|
||||
/* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:COL */
|
||||
/* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
|
||||
/* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
|
||||
/* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
|
||||
/* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
|
||||
/* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
|
||||
/* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
|
||||
/* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
|
||||
/* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
|
||||
/* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
|
||||
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
|
||||
},
|
||||
|
||||
/* Port C */
|
||||
{ /* conf ppar psor pdir podr pdat */
|
||||
/* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
|
||||
/* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
|
||||
/* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
|
||||
/* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
|
||||
/* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */
|
||||
/* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
|
||||
/* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
|
||||
/* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
|
||||
/* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
|
||||
/* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
|
||||
/* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
|
||||
/* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
|
||||
/* PC19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
|
||||
/* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
|
||||
/* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* PC17 */
|
||||
/* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
|
||||
/* PC15 */ { 0, 1, 0, 0, 0, 0 }, /* PC15 */
|
||||
/* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
|
||||
/* PC13 */ { 0, 1, 0, 0, 0, 0 }, /* PC13 */
|
||||
/* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
|
||||
/* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
|
||||
/* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FETHMDC */
|
||||
/* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FETHMDIO */
|
||||
/* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
|
||||
/* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
|
||||
/* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
|
||||
/* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
|
||||
/* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
|
||||
/* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
|
||||
/* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
|
||||
/* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
|
||||
/* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
|
||||
},
|
||||
|
||||
/* Port D */
|
||||
{ /* conf ppar psor pdir podr pdat */
|
||||
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
|
||||
/* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
|
||||
/* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
|
||||
/* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* PD28 */
|
||||
/* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* PD27 */
|
||||
/* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* PD26 */
|
||||
/* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
|
||||
/* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
|
||||
/* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
|
||||
/* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
|
||||
/* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
|
||||
/* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
|
||||
/* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
|
||||
/* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
|
||||
/* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
|
||||
/* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
|
||||
/* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
|
||||
/* PD14 */ { 0, 0, 0, 1, 0, 0 }, /* LED */
|
||||
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
|
||||
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
|
||||
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
|
||||
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
|
||||
/* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
|
||||
/* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
|
||||
/* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
|
||||
/* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
|
||||
/* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
|
||||
/* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
|
||||
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
|
||||
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
int board_early_init_f (void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
void reset_phy (void)
|
||||
{
|
||||
}
|
||||
|
||||
|
||||
int checkboard (void)
|
||||
{
|
||||
puts("Board: MicroSys PM856\n");
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
printf(" PCI1: 32 bit, %d MHz (compiled)\n",
|
||||
CONFIG_SYS_CLK_FREQ / 1000000);
|
||||
#else
|
||||
printf(" PCI1: disabled\n");
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Initialize local bus.
|
||||
*/
|
||||
local_bus_init();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
long int
|
||||
initdram(int board_type)
|
||||
{
|
||||
long dram_size = 0;
|
||||
extern long spd_sdram (void);
|
||||
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
||||
|
||||
puts("Initializing\n");
|
||||
|
||||
#if defined(CONFIG_DDR_DLL)
|
||||
{
|
||||
volatile ccsr_gur_t *gur= &immap->im_gur;
|
||||
int i,x;
|
||||
|
||||
x = 10;
|
||||
|
||||
/*
|
||||
* Work around to stabilize DDR DLL
|
||||
*/
|
||||
gur->ddrdllcr = 0x81000000;
|
||||
asm("sync;isync;msync");
|
||||
udelay (200);
|
||||
while (gur->ddrdllcr != 0x81000100)
|
||||
{
|
||||
gur->devdisr = gur->devdisr | 0x00010000;
|
||||
asm("sync;isync;msync");
|
||||
for (i=0; i<x; i++)
|
||||
;
|
||||
gur->devdisr = gur->devdisr & 0xfff7ffff;
|
||||
asm("sync;isync;msync");
|
||||
x++;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPD_EEPROM)
|
||||
dram_size = spd_sdram ();
|
||||
#else
|
||||
dram_size = fixed_sdram ();
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
/*
|
||||
* Initialize and enable DDR ECC.
|
||||
*/
|
||||
ddr_enable_ecc(dram_size);
|
||||
#endif
|
||||
|
||||
puts(" DDR: ");
|
||||
return dram_size;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Initialize Local Bus
|
||||
*/
|
||||
|
||||
void
|
||||
local_bus_init(void)
|
||||
{
|
||||
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
||||
volatile ccsr_gur_t *gur = &immap->im_gur;
|
||||
volatile ccsr_lbc_t *lbc = &immap->im_lbc;
|
||||
|
||||
uint clkdiv;
|
||||
uint lbc_hz;
|
||||
sys_info_t sysinfo;
|
||||
|
||||
/*
|
||||
* Errata LBC11.
|
||||
* Fix Local Bus clock glitch when DLL is enabled.
|
||||
*
|
||||
* If localbus freq is < 66Mhz, DLL bypass mode must be used.
|
||||
* If localbus freq is > 133Mhz, DLL can be safely enabled.
|
||||
* Between 66 and 133, the DLL is enabled with an override workaround.
|
||||
*/
|
||||
|
||||
get_sys_info(&sysinfo);
|
||||
clkdiv = lbc->lcrr & 0x0f;
|
||||
lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
|
||||
|
||||
if (lbc_hz < 66) {
|
||||
lbc->lcrr = CFG_LBC_LCRR | 0x80000000; /* DLL Bypass */
|
||||
|
||||
} else if (lbc_hz >= 133) {
|
||||
lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
|
||||
|
||||
} else {
|
||||
/*
|
||||
* On REV1 boards, need to change CLKDIV before enable DLL.
|
||||
* Default CLKDIV is 8, change it to 4 temporarily.
|
||||
*/
|
||||
uint pvr = get_pvr();
|
||||
uint temp_lbcdll = 0;
|
||||
|
||||
if (pvr == PVR_85xx_REV1) {
|
||||
/* FIXME: Justify the high bit here. */
|
||||
lbc->lcrr = 0x10000004;
|
||||
}
|
||||
|
||||
lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);/* DLL Enabled */
|
||||
udelay(200);
|
||||
|
||||
/*
|
||||
* Sample LBC DLL ctrl reg, upshift it to set the
|
||||
* override bits.
|
||||
*/
|
||||
temp_lbcdll = gur->lbcdllcr;
|
||||
gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
|
||||
asm("sync;isync;msync");
|
||||
}
|
||||
}
|
||||
|
||||
#if defined(CFG_DRAM_TEST)
|
||||
int testdram (void)
|
||||
{
|
||||
uint *pstart = (uint *) CFG_MEMTEST_START;
|
||||
uint *pend = (uint *) CFG_MEMTEST_END;
|
||||
uint *p;
|
||||
|
||||
printf("SDRAM test phase 1:\n");
|
||||
for (p = pstart; p < pend; p++)
|
||||
*p = 0xaaaaaaaa;
|
||||
|
||||
for (p = pstart; p < pend; p++) {
|
||||
if (*p != 0xaaaaaaaa) {
|
||||
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
|
||||
printf("SDRAM test phase 2:\n");
|
||||
for (p = pstart; p < pend; p++)
|
||||
*p = 0x55555555;
|
||||
|
||||
for (p = pstart; p < pend; p++) {
|
||||
if (*p != 0x55555555) {
|
||||
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
|
||||
printf("SDRAM test passed.\n");
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
/*************************************************************************
|
||||
* fixed sdram init -- doesn't use serial presence detect.
|
||||
************************************************************************/
|
||||
long int fixed_sdram (void)
|
||||
{
|
||||
#ifndef CFG_RAMBOOT
|
||||
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
||||
volatile ccsr_ddr_t *ddr= &immap->im_ddr;
|
||||
|
||||
ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
|
||||
ddr->cs0_config = CFG_DDR_CS0_CONFIG;
|
||||
ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
|
||||
ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
|
||||
ddr->sdram_mode = CFG_DDR_MODE;
|
||||
ddr->sdram_interval = CFG_DDR_INTERVAL;
|
||||
#if defined (CONFIG_DDR_ECC)
|
||||
ddr->err_disable = 0x0000000D;
|
||||
ddr->err_sbe = 0x00ff0000;
|
||||
#endif
|
||||
asm("sync;isync;msync");
|
||||
udelay(500);
|
||||
#if defined (CONFIG_DDR_ECC)
|
||||
/* Enable ECC checking */
|
||||
ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
|
||||
#else
|
||||
ddr->sdram_cfg = CFG_DDR_CONTROL;
|
||||
#endif
|
||||
asm("sync; isync; msync");
|
||||
udelay(500);
|
||||
#endif
|
||||
return CFG_SDRAM_SIZE * 1024 * 1024;
|
||||
}
|
||||
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
||||
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
/*
|
||||
* Initialize PCI Devices, report devices found.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_PCI_PNP
|
||||
static struct pci_config_table pci_mpc85xxads_config_table[] = {
|
||||
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
||||
PCI_IDSEL_NUMBER, PCI_ANY_ID,
|
||||
pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
|
||||
PCI_ENET0_MEMADDR,
|
||||
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
|
||||
} },
|
||||
{ }
|
||||
};
|
||||
#endif
|
||||
|
||||
|
||||
static struct pci_controller hose = {
|
||||
#ifndef CONFIG_PCI_PNP
|
||||
config_table: pci_mpc85xxads_config_table,
|
||||
#endif
|
||||
};
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
|
||||
void
|
||||
pci_init_board(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
extern void pci_mpc85xx_init(struct pci_controller *hose);
|
||||
|
||||
pci_mpc85xx_init(&hose);
|
||||
#endif /* CONFIG_PCI */
|
||||
}
|
||||
|
|
@ -0,0 +1,152 @@
|
|||
/*
|
||||
* (C) Copyright 2002,2003,Motorola,Inc.
|
||||
* Xianghua Xiao, X.Xiao@motorola.com.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
OUTPUT_ARCH(powerpc)
|
||||
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
|
||||
/* Do we need any of these for elf?
|
||||
__DYNAMIC = 0; */
|
||||
SECTIONS
|
||||
{
|
||||
.resetvec 0xFFFFFFFC :
|
||||
{
|
||||
*(.resetvec)
|
||||
} = 0xffff
|
||||
|
||||
.bootpg 0xFFFFF000 :
|
||||
{
|
||||
cpu/mpc85xx/start.o (.bootpg)
|
||||
board/pm856/init.o (.bootpg)
|
||||
} = 0xffff
|
||||
|
||||
/* Read-only sections, merged into text segment: */
|
||||
. = + SIZEOF_HEADERS;
|
||||
.interp : { *(.interp) }
|
||||
.hash : { *(.hash) }
|
||||
.dynsym : { *(.dynsym) }
|
||||
.dynstr : { *(.dynstr) }
|
||||
.rel.text : { *(.rel.text) }
|
||||
.rela.text : { *(.rela.text) }
|
||||
.rel.data : { *(.rel.data) }
|
||||
.rela.data : { *(.rela.data) }
|
||||
.rel.rodata : { *(.rel.rodata) }
|
||||
.rela.rodata : { *(.rela.rodata) }
|
||||
.rel.got : { *(.rel.got) }
|
||||
.rela.got : { *(.rela.got) }
|
||||
.rel.ctors : { *(.rel.ctors) }
|
||||
.rela.ctors : { *(.rela.ctors) }
|
||||
.rel.dtors : { *(.rel.dtors) }
|
||||
.rela.dtors : { *(.rela.dtors) }
|
||||
.rel.bss : { *(.rel.bss) }
|
||||
.rela.bss : { *(.rela.bss) }
|
||||
.rel.plt : { *(.rel.plt) }
|
||||
.rela.plt : { *(.rela.plt) }
|
||||
.init : { *(.init) }
|
||||
.plt : { *(.plt) }
|
||||
.text :
|
||||
{
|
||||
cpu/mpc85xx/start.o (.text)
|
||||
board/pm856/init.o (.text)
|
||||
cpu/mpc85xx/commproc.o (.text)
|
||||
cpu/mpc85xx/traps.o (.text)
|
||||
cpu/mpc85xx/interrupts.o (.text)
|
||||
cpu/mpc85xx/serial_scc.o (.text)
|
||||
cpu/mpc85xx/ether_fcc.o (.text)
|
||||
cpu/mpc85xx/cpu_init.o (.text)
|
||||
cpu/mpc85xx/cpu.o (.text)
|
||||
cpu/mpc85xx/tsec.o (.text)
|
||||
cpu/mpc85xx/speed.o (.text)
|
||||
cpu/mpc85xx/i2c.o (.text)
|
||||
cpu/mpc85xx/spd_sdram.o (.text)
|
||||
common/dlmalloc.o (.text)
|
||||
lib_generic/crc32.o (.text)
|
||||
lib_ppc/extable.o (.text)
|
||||
lib_generic/zlib.o (.text)
|
||||
*(.text)
|
||||
*(.fixup)
|
||||
*(.got1)
|
||||
}
|
||||
_etext = .;
|
||||
PROVIDE (etext = .);
|
||||
.rodata :
|
||||
{
|
||||
*(.rodata)
|
||||
*(.rodata1)
|
||||
*(.rodata.str1.4)
|
||||
}
|
||||
.fini : { *(.fini) } =0
|
||||
.ctors : { *(.ctors) }
|
||||
.dtors : { *(.dtors) }
|
||||
|
||||
/* Read-write section, merged into data segment: */
|
||||
. = (. + 0x00FF) & 0xFFFFFF00;
|
||||
_erotext = .;
|
||||
PROVIDE (erotext = .);
|
||||
.reloc :
|
||||
{
|
||||
*(.got)
|
||||
_GOT2_TABLE_ = .;
|
||||
*(.got2)
|
||||
_FIXUP_TABLE_ = .;
|
||||
*(.fixup)
|
||||
}
|
||||
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
|
||||
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
|
||||
|
||||
.data :
|
||||
{
|
||||
*(.data)
|
||||
*(.data1)
|
||||
*(.sdata)
|
||||
*(.sdata2)
|
||||
*(.dynamic)
|
||||
CONSTRUCTORS
|
||||
}
|
||||
_edata = .;
|
||||
PROVIDE (edata = .);
|
||||
|
||||
__u_boot_cmd_start = .;
|
||||
.u_boot_cmd : { *(.u_boot_cmd) }
|
||||
__u_boot_cmd_end = .;
|
||||
|
||||
__start___ex_table = .;
|
||||
__ex_table : { *(__ex_table) }
|
||||
__stop___ex_table = .;
|
||||
|
||||
. = ALIGN(256);
|
||||
__init_begin = .;
|
||||
.text.init : { *(.text.init) }
|
||||
.data.init : { *(.data.init) }
|
||||
. = ALIGN(256);
|
||||
__init_end = .;
|
||||
|
||||
__bss_start = .;
|
||||
.bss :
|
||||
{
|
||||
*(.sbss) *(.scommon)
|
||||
*(.dynbss)
|
||||
*(.bss)
|
||||
*(COMMON)
|
||||
}
|
||||
_end = . ;
|
||||
PROVIDE (end = .);
|
||||
}
|
||||
|
|
@ -23,8 +23,6 @@
|
|||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
|
||||
|
||||
#include <common.h>
|
||||
|
||||
#ifdef CONFIG_VIDEO
|
||||
|
|
|
|||
|
|
@ -0,0 +1,439 @@
|
|||
/*
|
||||
* Copyright 2004 Freescale Semiconductor.
|
||||
* (C) Copyright 2002,2003 Motorola,Inc.
|
||||
* Xianghua Xiao <X.Xiao@motorola.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
* MicroSys PM856 board configuration file
|
||||
*
|
||||
* Please refer to doc/README.mpc85xx for more info.
|
||||
*
|
||||
* Make sure you change the MAC address and other network params first,
|
||||
* search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/* High Level Configuration Options */
|
||||
#define CONFIG_BOOKE 1 /* BOOKE */
|
||||
#define CONFIG_E500 1 /* BOOKE e500 family */
|
||||
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
|
||||
#define CONFIG_MPC8560 1 /* MPC8560 specific */
|
||||
#define CONFIG_PM856 1 /* PM856 board specific */
|
||||
|
||||
#define CONFIG_PCI
|
||||
#define CONFIG_TSEC_ENET /* tsec ethernet support */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#undef CONFIG_SPD_EEPROM /* do not use SPD EEPROM for DDR setup*/
|
||||
#define CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
||||
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
|
||||
|
||||
|
||||
/*
|
||||
* sysclk for MPC85xx
|
||||
*
|
||||
* Two valid values are:
|
||||
* 33000000
|
||||
* 66000000
|
||||
*
|
||||
* Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
|
||||
* is likely the desired value here, so that is now the default.
|
||||
* The board, however, can run at 66MHz. In any event, this value
|
||||
* must match the settings of some switches. Details can be found
|
||||
* in the README.mpc85xxads.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_SYS_CLK_FREQ
|
||||
#define CONFIG_SYS_CLK_FREQ 66000000
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* These can be toggled for performance analysis, otherwise use default.
|
||||
*/
|
||||
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
||||
#define CONFIG_BTB /* toggle branch predition */
|
||||
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
||||
|
||||
#define CFG_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */
|
||||
|
||||
#undef CFG_DRAM_TEST /* memory test, takes time */
|
||||
#define CFG_MEMTEST_START 0x00200000 /* memtest region */
|
||||
#define CFG_MEMTEST_END 0x00400000
|
||||
|
||||
|
||||
/*
|
||||
* Base addresses -- Note these are effective addresses where the
|
||||
* actual resources get mapped (not physical addresses)
|
||||
*/
|
||||
#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
|
||||
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
|
||||
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
|
||||
|
||||
|
||||
/*
|
||||
* DDR Setup
|
||||
*/
|
||||
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
|
||||
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
|
||||
|
||||
#if defined(CONFIG_SPD_EEPROM)
|
||||
/*
|
||||
* Determine DDR configuration from I2C interface.
|
||||
*/
|
||||
#define SPD_EEPROM_ADDRESS 0x58 /* DDR DIMM */
|
||||
|
||||
#else
|
||||
/*
|
||||
* Manually set up DDR parameters
|
||||
*/
|
||||
#define CFG_SDRAM_SIZE 256 /* DDR is 256 MB */
|
||||
#define CFG_DDR_CS0_BNDS 0x0000000f /* 0-256MB */
|
||||
#define CFG_DDR_CS0_CONFIG 0x80000102
|
||||
#define CFG_DDR_TIMING_1 0x47444321
|
||||
#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
|
||||
#define CFG_DDR_CONTROL 0xc2008000 /* unbuffered,no DYN_PWR */
|
||||
#define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
|
||||
#define CFG_DDR_INTERVAL 0x045b0100 /* autocharge,no open page */
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* SDRAM on the Local Bus
|
||||
*/
|
||||
#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
|
||||
#define CFG_LBC_SDRAM_SIZE 0 /* LBC SDRAM is 0 MB */
|
||||
|
||||
#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH 32M */
|
||||
#define CFG_BR0_PRELIM 0xfe001801 /* port size 32bit */
|
||||
|
||||
#define CFG_OR0_PRELIM 0xfe006f67 /* 32MB Flash */
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
|
||||
#undef CFG_FLASH_CHECKSUM
|
||||
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
||||
|
||||
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
|
||||
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
||||
#define CFG_RAMBOOT
|
||||
#else
|
||||
#undef CFG_RAMBOOT
|
||||
#endif
|
||||
|
||||
#define CFG_FLASH_CFI_DRIVER
|
||||
#define CFG_FLASH_CFI
|
||||
#define CFG_FLASH_EMPTY_INFO
|
||||
|
||||
#undef CONFIG_CLOCKS_IN_MHZ
|
||||
|
||||
|
||||
/*
|
||||
* Local Bus Definitions
|
||||
*/
|
||||
|
||||
#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
|
||||
#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
|
||||
#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
|
||||
#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/
|
||||
|
||||
|
||||
#define CONFIG_L1_INIT_RAM
|
||||
#define CFG_INIT_RAM_LOCK 1
|
||||
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
|
||||
#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
|
||||
|
||||
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
|
||||
#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
|
||||
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
||||
|
||||
/* Serial Port */
|
||||
#define CONFIG_CONS_ON_SCC /* define if console on SCC */
|
||||
#undef CONFIG_CONS_NONE /* define if console on something else */
|
||||
#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
|
||||
|
||||
#define CFG_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
|
||||
|
||||
/* Use the HUSH parser */
|
||||
#define CFG_HUSH_PARSER
|
||||
#ifdef CFG_HUSH_PARSER
|
||||
#define CFG_PROMPT_HUSH_PS2 "> "
|
||||
#endif
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_HARD_I2C /* I2C with hardware support*/
|
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CFG_I2C_SLAVE 0x7F
|
||||
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
|
||||
|
||||
/*
|
||||
* EEPROM configuration
|
||||
*/
|
||||
#define CFG_I2C_EEPROM_ADDR 0x58
|
||||
#define CFG_I2C_EEPROM_ADDR_LEN 1
|
||||
#define CFG_EEPROM_PAGE_WRITE_BITS 4
|
||||
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
|
||||
|
||||
/*
|
||||
* RTC configuration
|
||||
*/
|
||||
#define CONFIG_RTC_PCF8563
|
||||
#define CFG_I2C_RTC_ADDR 0x51
|
||||
|
||||
/* RapidIO MMU */
|
||||
#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
|
||||
#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
|
||||
#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */
|
||||
|
||||
/*
|
||||
* General PCI
|
||||
* Addresses are mapped 1-1.
|
||||
*/
|
||||
#define CFG_PCI1_MEM_BASE 0x80000000
|
||||
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
|
||||
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
|
||||
#define CFG_PCI1_IO_BASE 0xe2000000
|
||||
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
|
||||
#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
|
||||
#undef CONFIG_EEPRO100
|
||||
#undef CONFIG_TULIP
|
||||
|
||||
#if !defined(CONFIG_PCI_PNP)
|
||||
#define PCI_ENET0_IOADDR 0xe0000000
|
||||
#define PCI_ENET0_MEMADDR 0xe0000000
|
||||
#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
|
||||
#endif
|
||||
|
||||
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
|
||||
#if defined(CONFIG_TSEC_ENET)
|
||||
|
||||
#ifndef CONFIG_NET_MULTI
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#endif
|
||||
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_MPC85XX_TSEC1 1
|
||||
#define CONFIG_MPC85XX_TSEC2 1
|
||||
#undef CONFIG_MPC85XX_FEC
|
||||
#define TSEC1_PHY_ADDR 0
|
||||
#define TSEC2_PHY_ADDR 1
|
||||
#define TSEC1_PHYIDX 0
|
||||
#define TSEC2_PHYIDX 0
|
||||
|
||||
#endif /* CONFIG_TSEC_ENET */
|
||||
|
||||
#define CONFIG_ETHPRIME "ENET0"
|
||||
|
||||
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
|
||||
#undef CONFIG_ETHER_NONE /* define if ether on something else */
|
||||
|
||||
|
||||
/*
|
||||
* - Rx-CLK is CLK15
|
||||
* - Tx-CLK is CLK14
|
||||
* - Select bus for bd/buffers
|
||||
* - Full duplex
|
||||
*/
|
||||
#define CONFIG_ETHER_ON_FCC3
|
||||
#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
|
||||
#define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
|
||||
#define CFG_CPMFCR_RAMTYPE 0
|
||||
#define CFG_FCC_PSMR (FCC_PSMR_FDE)
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
#ifndef CFG_RAMBOOT
|
||||
#define CFG_ENV_IS_IN_FLASH 1
|
||||
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x80000)
|
||||
#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
|
||||
#define CFG_ENV_SIZE 0x2000
|
||||
#else
|
||||
#define CFG_NO_FLASH 1 /* Flash is not usable now */
|
||||
#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||||
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
|
||||
#define CFG_ENV_SIZE 0x2000
|
||||
#endif
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
#if defined(CFG_RAMBOOT)
|
||||
#if defined(CONFIG_PCI)
|
||||
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_PCI \
|
||||
| CFG_CMD_I2C) \
|
||||
& \
|
||||
~(CFG_CMD_ENV \
|
||||
| CFG_CMD_LOADS))
|
||||
#else
|
||||
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_I2C) \
|
||||
& \
|
||||
~(CFG_CMD_ENV \
|
||||
| CFG_CMD_LOADS))
|
||||
#endif
|
||||
#else
|
||||
#if defined(CONFIG_PCI)
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
|
||||
| CFG_CMD_EEPROM \
|
||||
| CFG_CMD_DATE \
|
||||
| CFG_CMD_PCI \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_I2C)
|
||||
#else
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
|
||||
| CFG_CMD_EEPROM \
|
||||
| CFG_CMD_DATE \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_I2C)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_LOAD_ADDR 0x1000000 /* default load address */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
|
||||
#define CONFIG_LOOPW
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
|
||||
|
||||
/* Cache Configuration */
|
||||
#define CFG_DCACHE_SIZE 32768
|
||||
#define CFG_CACHELINE_SIZE 32
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Internal Definitions
|
||||
*
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* Environment Configuration
|
||||
*/
|
||||
|
||||
/* The mac addresses for all ethernet interface */
|
||||
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
|
||||
#define CONFIG_ETHADDR 00:40:42:01:00:00
|
||||
#define CONFIG_HAS_ETH1
|
||||
#define CONFIG_ETH1ADDR 00:40:42:01:00:01
|
||||
#define CONFIG_HAS_ETH2
|
||||
#define CONFIG_ETH2ADDR 00:40:42:01:00:02
|
||||
#endif
|
||||
|
||||
|
||||
#define CONFIG_ROOTPATH /opt/eldk/ppc_85xx
|
||||
#define CONFIG_BOOTFILE pm856/uImage
|
||||
|
||||
#define CONFIG_HOSTNAME pm856
|
||||
#define CONFIG_IPADDR 192.168.0.103
|
||||
#define CONFIG_SERVERIP 192.168.0.64
|
||||
#define CONFIG_GATEWAYIP 192.168.0.1
|
||||
#define CONFIG_NETMASK 255.255.255.0
|
||||
|
||||
#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
|
||||
|
||||
#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
|
||||
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
||||
|
||||
#define CONFIG_BAUDRATE 9600
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=400000\0" \
|
||||
"ramdiskfile=pm856/uRamdisk\0"
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"bootm $loadaddr"
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue