phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

ml300: remove support for broken, orphaned board 

The ml300 board has a number of issues, but nobody cares about this
long-orphaned board any more.  Remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Michal Simek <monstr@monstr.eu>
This commit is contained in:
Wolfgang Denk 2010-03-24 12:19:19 +01:00
parent cc3074c322
commit a574cff121
13 changed files with 0 additions and 1747 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
MAKEALL
View File

@ -238,7 +238,6 @@ LIST_4xx=" \
MIP405 \
MIP405T \
ML2 \
ml300 \
ml507 \
ml507_flash \
neo \

3
Makefile
View File

@ -1435,9 +1435,6 @@ MIP405T_config: unconfig
ML2_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
ml300_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
ml507_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@mkdir -p $(obj)include $(obj)board/xilinx/ml507

70
board/xilinx/ml300/Makefile
View File

@ -1,70 +0,0 @@
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
ifneq ($(OBJTREE),$(SRCTREE))
$(shell mkdir -p $(obj)../common)
$(shell mkdir -p $(obj)../xilinx_enet)
$(shell mkdir -p $(obj)../xilinx_iic)
endif
INCS := -I../common -I../xilinx_enet -I../xilinx_iic
CFLAGS += $(INCS)
HOSTCFLAGS += $(INCS)
LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o \
serial.o \
../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
../xilinx_enet/xemac_intr_dma.o ../xilinx_iic/iic_adapter.o \
../xilinx_iic/xiic_l.o ../common/xipif_v1_23_b.o \
../common/xbasic_types.o ../common/xdma_channel.o \
../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
../common/xversion.o \
SOBJS = init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

32
board/xilinx/ml300/config.mk
View File

@ -1,32 +0,0 @@
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# esd ADCIOP boards
#
#TEXT_BASE = 0xFFFE0000
TEXT_BASE = 0x04000000
# Use board specific linker script
LDSCRIPT := $(SRCTREE)/board/xilinx/ml300/u-boot.lds

44
board/xilinx/ml300/init.S
View File

@ -1,44 +0,0 @@
/*
* init.S: Stubs for U-Boot initialization
*
* Author: Xilinx, Inc.
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS FOR A PARTICULAR PURPOSE.
*
*
* Xilinx hardware products are not intended for use in life support
* appliances, devices, or systems. Use in such applications is
* expressly prohibited.
*
*
* (c) Copyright 2002-2004 Xilinx Inc.
* All rights reserved.
*
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
*/
.globl ext_bus_cntlr_init
ext_bus_cntlr_init:
blr

128
board/xilinx/ml300/ml300.c
View File

@ -1,128 +0,0 @@
/*
* ml300.c: U-Boot platform support for Xilinx ML300 board
*
* Author: Xilinx, Inc.
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS FOR A PARTICULAR PURPOSE.
*
*
* Xilinx hardware products are not intended for use in life support
* appliances, devices, or systems. Use in such applications is
* expressly prohibited.
*
*
* (c) Copyright 2002-2004 Xilinx Inc.
* All rights reserved.
*
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <config.h>
#include <common.h>
#include <asm/processor.h>
#ifdef CONFIG_ENV_IS_IN_EEPROM
extern void convert_env(void);
#endif
int
board_pre_init(void)
{
return 0;
}
int
checkboard(void)
{
char tmp[64]; /* long enough for environment variables */
char *s, *e;
int i = getenv_r("L", tmp, sizeof (tmp));
if (i < 0) {
printf("### No HW ID - assuming ML300");
} else {
for (e = tmp; *e; ++e) {
if (*e == ' ')
break;
}
printf("### Board Serial# is ");
for (s = tmp; s < e; ++s) {
putc(*s);
}
}
putc('\n');
return (0);
}
phys_size_t
initdram(int board_type)
{
return 128 * 1024 * 1024;
}
int
testdram(void)
{
printf("test: xxx MB - ok\n");
return (0);
}
/* implement functions originally in cpu/ppc4xx/speed.c */
void
get_sys_info(sys_info_t * sysInfo)
{
sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
/* only correct if the PLB and OPB run at the same frequency */
sysInfo->freqPLB = XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
sysInfo->freqPCI = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 3;
}
ulong
get_PCI_freq(void)
{
ulong val;
PPC4xx_SYS_INFO sys_info;
get_sys_info(&sys_info);
val = sys_info.freqPCI;
return val;
}
#ifdef CONFIG_MISC_INIT_R
int
misc_init_r()
{
/* convert env name and value to u-boot standard */
convert_env();
return 0;
}
#endif

154
board/xilinx/ml300/serial.c
View File

@ -1,154 +0,0 @@
/*
* Author: Xilinx, Inc.
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS FOR A PARTICULAR PURPOSE.
*
*
* Xilinx hardware products are not intended for use in life support
* appliances, devices, or systems. Use in such applications is
* expressly prohibited.
*
*
* (c) Copyright 2002-2004 Xilinx Inc.
* All rights reserved.
*
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <common.h>
#include <asm/u-boot.h>
#include <asm/processor.h>
#include <command.h>
#include <config.h>
DECLARE_GLOBAL_DATA_PTR;
#define USE_CHAN1 \
((defined XPAR_UARTNS550_0_BASEADDR) && (defined CONFIG_SYS_INIT_CHAN1))
#define USE_CHAN2 \
((defined XPAR_UARTNS550_1_BASEADDR) && (defined CONFIG_SYS_INIT_CHAN2))
#if USE_CHAN1
#include <ns16550.h>
#endif
#if USE_CHAN1
const NS16550_t COM_PORTS[] = { (NS16550_t) (XPAR_UARTNS550_0_BASEADDR + 3)
#if USE_CHAN2
, (NS16550_t) (XPAR_UARTNS550_1_BASEADDR + 3)
#endif
};
#endif
int
serial_init(void)
{
#if USE_CHAN1
int clock_divisor;
clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
(void) NS16550_init(COM_PORTS[0], clock_divisor);
#if USE_CHAN2
clock_divisor = XPAR_UARTNS550_1_CLOCK_FREQ_HZ / 16 / gd->baudrate;
(void) NS16550_init(COM_PORTS[1], clock_divisor);
#endif
#endif
return 0;
}
void
serial_putc(const char c)
{
if (c == '\n')
NS16550_putc(COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
NS16550_putc(COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
}
int
serial_getc(void)
{
return NS16550_getc(COM_PORTS[CONFIG_SYS_DUART_CHAN]);
}
int
serial_tstc(void)
{
return NS16550_tstc(COM_PORTS[CONFIG_SYS_DUART_CHAN]);
}
void
serial_setbrg(void)
{
#if USE_CHAN1
int clock_divisor;
clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
NS16550_reinit(COM_PORTS[0], clock_divisor);
#if USE_CHAN2
clock_divisor = XPAR_UARTNS550_1_CLOCK_FREQ_HZ / 16 / gd->baudrate;
NS16550_reinit(COM_PORTS[1], clock_divisor);
#endif
#endif
}
void
serial_puts(const char *s)
{
while (*s) {
serial_putc(*s++);
}
}
#if defined(CONFIG_CMD_KGDB)
void
kgdb_serial_init(void)
{
}
void
putDebugChar(int c)
{
serial_putc(c);
}
void
putDebugStr(const char *str)
{
serial_puts(str);
}
int
getDebugChar(void)
{
return serial_getc();
}
void
kgdb_interruptible(int yes)
{
return;
}
#endif

146
board/xilinx/ml300/u-boot.lds
View File

@ -1,146 +0,0 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_ARCH(powerpc)
ENTRY(_start)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
.rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
.rela.data : { *(.rela.data) }
.rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
.plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
/*
cpu/ppc4xx/start.o (.text)
board/xilinx/ml300/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
cpu/ppc4xx/4xx_uart.o (.text)
cpu/ppc4xx/cpu_init.o (.text)
cpu/ppc4xx/speed.o (.text)
drivers/net/4xx_enet.o (.text)
common/dlmalloc.o (.text)
lib_generic/crc32.o (.text)
lib_ppc/extable.o (.text)
lib_generic/zlib.o (.text)
*/
/* . = env_offset;*/
/* common/env_embedded.o(.text)*/
*(.text)
*(.got1)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
*(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
*(.got)
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
*(.fixup)
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
*(.data)
*(.data1)
*(.sdata)
*(.sdata2)
*(.dynamic)
CONSTRUCTORS
}
_edata = .;
PROVIDE (edata = .);
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(256);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(256);
__init_end = .;
__bss_start = .;
.bss (NOLOAD) :
{
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss)
*(COMMON)
. = ALIGN(4);
}
_end = . ;
PROVIDE (end = .);
}

135
board/xilinx/ml300/u-boot.lds.debug
View File

@ -1,135 +0,0 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_ARCH(powerpc)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
.rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
.rela.data : { *(.rela.data) }
.rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
.plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
mpc8xx/start.o (.text)
common/dlmalloc.o (.text)
lib_generic/vsprintf.o (.text)
lib_generic/crc32.o (.text)
lib_ppc/extable.o (.text)
common/env_embedded.o(.text)
*(.text)
*(.got1)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
*(.rodata)
*(.rodata1)
*(.rodata.str1.4)
*(.eh_frame)
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
*(.got)
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
*(.fixup)
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
*(.data)
*(.data1)
*(.sdata)
*(.sdata2)
*(.dynamic)
CONSTRUCTORS
}
_edata = .;
PROVIDE (edata = .);
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(4096);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(4096);
__init_end = .;
__bss_start = .;
.bss :
{
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss)
*(COMMON)
}
_end = . ;
PROVIDE (end = .);
}

196
board/xilinx/ml300/xparameters.h
View File

@ -1,196 +0,0 @@
/*******************************************************************
*
* CAUTION: This file is automatically generated by libgen.
* Version: Xilinx EDK 6.2 EDK_Gm.11
* DO NOT EDIT.
*
* Copyright (c) 2003 Xilinx, Inc. All rights reserved.
*
* Description: Driver parameters
*
*******************************************************************/
/******************************************************************/
/* U-Boot Redefines */
/******************************************************************/
#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
#define XPAR_UARTNS550_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR+0x1000)
#define XPAR_UARTNS550_1_HIGHADDR XPAR_OPB_UART16550_1_HIGHADDR
#define XPAR_UARTNS550_1_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
#define XPAR_UARTNS550_1_DEVICE_ID XPAR_OPB_UART16550_1_DEVICE_ID
/******************************************************************/
#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
/******************************************************************/
#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
/******************************************************************/
#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
/******************************************************************/
#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
/******************************************************************/
#define XPAR_XPCI_NUM_INSTANCES 1
#define XPAR_XPCI_CLOCK_HZ 33333333
#define XPAR_OPB_PCI_REF_0_DEVICE_ID 0
#define XPAR_OPB_PCI_REF_0_BASEADDR 0x20000000
#define XPAR_OPB_PCI_REF_0_HIGHADDR 0x3FFFFFFF
#define XPAR_OPB_PCI_REF_0_CONFIG_ADDR 0x3C000000
#define XPAR_OPB_PCI_REF_0_CONFIG_DATA 0x3C000004
#define XPAR_OPB_PCI_REF_0_LCONFIG_ADDR 0x3E000000
#define XPAR_OPB_PCI_REF_0_MEM_BASEADDR 0x20000000
#define XPAR_OPB_PCI_REF_0_MEM_HIGHADDR 0x37FFFFFF
#define XPAR_OPB_PCI_REF_0_IO_BASEADDR 0x38000000
#define XPAR_OPB_PCI_REF_0_IO_HIGHADDR 0x3BFFFFFF
/******************************************************************/
#define XPAR_XEMAC_NUM_INSTANCES 1
#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
/******************************************************************/
#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_0 0
#define XPAR_MY_OPB_GPIO_0_BASEADDR_0 0x90000000
#define XPAR_MY_OPB_GPIO_0_HIGHADDR_0 (0x90000000+0x7)
#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_1 1
#define XPAR_MY_OPB_GPIO_0_BASEADDR_1 (0x90000000+0x8)
#define XPAR_MY_OPB_GPIO_0_HIGHADDR_1 (0x90000000+0x1F)
#define XPAR_XGPIO_NUM_INSTANCES 2
/******************************************************************/
#define XPAR_XIIC_NUM_INSTANCES 1
#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
#define XPAR_OPB_IIC_0_DEVICE_ID 0
#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
/******************************************************************/
#define XPAR_XUARTNS550_NUM_INSTANCES 2
#define XPAR_XUARTNS550_CLOCK_HZ 100000000
#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
#define XPAR_OPB_UART16550_0_DEVICE_ID 0
#define XPAR_OPB_UART16550_1_BASEADDR 0xA0010000
#define XPAR_OPB_UART16550_1_HIGHADDR 0xA0011FFF
#define XPAR_OPB_UART16550_1_DEVICE_ID 1
/******************************************************************/
#define XPAR_XSPI_NUM_INSTANCES 1
#define XPAR_OPB_SPI_0_BASEADDR 0xA4000000
#define XPAR_OPB_SPI_0_HIGHADDR 0xA400007F
#define XPAR_OPB_SPI_0_DEVICE_ID 0
#define XPAR_OPB_SPI_0_FIFO_EXIST 1
#define XPAR_OPB_SPI_0_SPI_SLAVE_ONLY 0
#define XPAR_OPB_SPI_0_NUM_SS_BITS 1
/******************************************************************/
#define XPAR_XPS2_NUM_INSTANCES 2
#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
/******************************************************************/
#define XPAR_XTOUCHSCREEN_NUM_INSTANCES 1
#define XPAR_OPB_TSD_REF_0_BASEADDR 0xAA000000
#define XPAR_OPB_TSD_REF_0_HIGHADDR 0xAA000007
#define XPAR_OPB_TSD_REF_0_DEVICE_ID 0
/******************************************************************/
#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
#define XPAR_OPB_PAR_PORT_REF_0_BASEADDR 0x90010000
#define XPAR_OPB_PAR_PORT_REF_0_HIGHADDR 0x900100FF
#define XPAR_PLB_DDR_0_BASEADDR 0x00000000
#define XPAR_PLB_DDR_0_HIGHADDR 0x0FFFFFFF
/******************************************************************/
#define XPAR_XINTC_HAS_IPR 1
#define XPAR_INTC_MAX_NUM_INTR_INPUTS 18
#define XPAR_XINTC_USE_DCR 0
#define XPAR_XINTC_NUM_INSTANCES 1
#define XPAR_DCR_INTC_0_BASEADDR 0xD0000FC0
#define XPAR_DCR_INTC_0_HIGHADDR 0xD0000FDF
#define XPAR_DCR_INTC_0_DEVICE_ID 0
#define XPAR_DCR_INTC_0_KIND_OF_INTR 0x00038000
/******************************************************************/
#define XPAR_DCR_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 0
#define XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 1
#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_TEMP_CRIT_INTR 2
#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_IRQ_INTR 3
#define XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 4
#define XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 5
#define XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 6
#define XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR 7
#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 9
#define XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR 10
#define XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR 11
#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 12
#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 13
#define XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR 14
#define XPAR_DCR_INTC_0_PLB2OPB_BRIDGE_0_BUS_ERROR_DET_INTR 15
#define XPAR_DCR_INTC_0_PLB_V34_0_BUS_ERROR_DET_INTR 16
#define XPAR_DCR_INTC_0_OPB2PLB_BRIDGE_0_BUS_ERROR_DET_INTR 17
/******************************************************************/
#define XPAR_XTFT_NUM_INSTANCES 1
#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
/******************************************************************/
#define XPAR_XSYSACE_MEM_WIDTH 8
#define XPAR_XSYSACE_NUM_INSTANCES 1
#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
#define XPAR_OPB_SYSACE_0_MEM_WIDTH 8
/******************************************************************/
#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
/******************************************************************/

529
board/xilinx/xilinx_iic/iic_adapter.c
View File

@ -1,529 +0,0 @@
/******************************************************************************
*
* Author: Xilinx, Inc.
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS FOR A PARTICULAR PURPOSE.
*
*
* Xilinx hardware products are not intended for use in life support
* appliances, devices, or systems. Use in such applications is
* expressly prohibited.
*
*
* (c) Copyright 2002-2004 Xilinx Inc.
* All rights reserved.
*
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
******************************************************************************/
#include <config.h>
#include <common.h>
#include <environment.h>
#include <net.h>
#ifdef CONFIG_ENV_IS_IN_EEPROM
#include <i2c.h>
#include "xiic_l.h"
#define IIC_DELAY 5000
static u8 envStep = 0; /* 0 means crc has not been read */
const u8 hex[] = "0123456789ABCDEF"; /* lookup table for ML300 CRC */
/************************************************************************
* Use Xilinx provided driver to send data to EEPROM using iic bus.
*/
static void
send(u32 adr, u8 * data, u32 len)
{
u8 sendBuf[34]; /* first 2-bit is address and others are data */
u32 pos, wlen;
u32 ret;
wlen = 32;
for (pos = 0; pos < len; pos += 32) {
if ((len - pos) < 32)
wlen = len - pos;
/* Put address and data bits together */
sendBuf[0] = (u8) ((adr + pos) >> 8);
sendBuf[1] = (u8) (adr + pos);
memcpy(&sendBuf[2], &data[pos], wlen);
/* Send to EEPROM through iic bus */
ret = XIic_Send(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1,
sendBuf, wlen + 2);
udelay(IIC_DELAY);
}
}
/************************************************************************
* Use Xilinx provided driver to read data from EEPROM using the iic bus.
*/
static void
receive(u32 adr, u8 * data, u32 len)
{
u8 address[2];
u32 ret;
address[0] = (u8) (adr >> 8);
address[1] = (u8) adr;
/* Provide EEPROM address */
ret =
XIic_Send(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1, address,
2);
/* Receive data from EEPROM */
ret =
XIic_Recv(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1, data, len);
}
/************************************************************************
* Convert a hexadecimal string to its equivalent integer value.
*/
static u8
axtoi(u8 * hexStg)
{
u8 n; /* position in string */
u8 m; /* position in digit[] to shift */
u8 count; /* loop index */
u8 intValue; /* integer value of hex string */
u8 digit[2]; /* hold values to convert */
for (n = 0; n < 2; n++) {
if (hexStg[n] == '\0')
break;
if (hexStg[n] > 0x29 && hexStg[n] < 0x40)
digit[n] = hexStg[n] & 0x0f;
else if (hexStg[n] >= 'a' && hexStg[n] <= 'f')
digit[n] = (hexStg[n] & 0x0f) + 9;
else if (hexStg[n] >= 'A' && hexStg[n] <= 'F')
digit[n] = (hexStg[n] & 0x0f) + 9;
else
break;
}
intValue = 0;
count = n;
m = n - 1;
n = 0;
while (n < count) {
intValue = intValue | (digit[n] << (m << 2));
m--; /* adjust the position to set */
n++; /* next digit to process */
}
return (intValue);
}
/************************************************************************
* Convert an integer string to its equivalent value.
*/
static u8
atoi(uchar * string)
{
u8 res = 0;
while (*string >= '0' && *string <= '9') {
res *= 10;
res += *string - '0';
string++;
}
return res;
}
/************************************************************************
* Key-value pairs are separated by "=" sign.
*/
static void
findKey(uchar * buffer, int *loc, u8 len)
{
u32 i;
for (i = 0; i < len; i++)
if (buffer[i] == '=') {
*loc = i;
return;
}
/* return -1 is no "=" sign found */
*loc = -1;
}
/************************************************************************
* Compute a new ML300 CRC when user calls the saveenv command.
* Also update EEPROM with new CRC value.
*/
static u8
update_crc(u32 len, uchar * data)
{
uchar temp[6] = { 'C', '=', 0x00, 0x00, 0x00, 0x00 };
u32 crc; /* new crc value */
u32 i;
crc = 0;
/* calculate new CRC */
for (i = 0; i < len; i++)
crc += data[i];
/* CRC includes key for check sum */
crc += 'C' + '=';
/* compose new CRC to be updated */
temp[2] = hex[(crc >> 4) & 0xf];
temp[3] = hex[crc & 0xf];
/* check to see if env size exceeded */
if (len + 6 > ENV_SIZE) {
printf("ERROR: not enough space to store CRC on EEPROM");
return 1;
}
memcpy(data + len, temp, 6);
return 0;
}
/************************************************************************
* Read out ML300 CRC and compare it with a runtime calculated ML300 CRC.
* If equal, then pass back a u-boot CRC value, otherwise pass back
* junk to indicate CRC error.
*/
static void
read_crc(uchar * buffer, int len)
{
u32 addr, n;
u32 crc; /* runtime crc */
u8 old[2] = { 0xff, 0xff }; /* current CRC in EEPROM */
u8 stop; /* indication of end of env data */
u8 pre; /* previous EEPROM data bit */
int i, loc;
addr = CONFIG_ENV_OFFSET; /* start from first env address */
n = 0;
pre = 1;
stop = 1;
crc = 0;
/* calculate runtime CRC according to ML300 and read back
old CRC stored in the EEPROM */
while (n < CONFIG_ENV_SIZE) {
receive(addr, buffer, len);
/* found two null chars, end of env */
if ((pre || buffer[0]) == 0)
break;
findKey(buffer, &loc, len);
/* found old check sum, read and store old CRC */
if ((loc == 0 && pre == 'C')
|| (loc > 0 && buffer[loc - 1] == 'C'))
receive(addr + loc + 1, old, 2);
pre = buffer[len - 1];
/* calculate runtime ML300 CRC */
crc += buffer[0];
i = 1;
do {
crc += buffer[i];
stop = buffer[i] || buffer[i - 1];
i++;
} while (stop && (i < len));
if (stop == 0)
break;
n += len;
addr += len;
}
/* exclude old CRC from runtime calculation */
crc -= (old[0] + old[1]);
/* match CRC values, send back u-boot CRC */
if ((old[0] == hex[(crc >> 4) & 0xf])
&& (old[1] == hex[crc & 0xf])) {
crc = 0;
n = 0;
addr =
CONFIG_ENV_OFFSET - offsetof(env_t, crc) + offsetof(env_t,
data);
/* calculate u-boot crc */
while (n < ENV_SIZE) {
receive(addr, buffer, len);
crc = crc32(crc, buffer, len);
n += len;
addr += len;
}
memcpy(buffer, &crc, 4);
}
}
/************************************************************************
* Convert IP address to hexadecimals.
*/
static void
ip_ml300(uchar * s, uchar * res)
{
char temp[2];
u8 i;
res[0] = 0x00;
for (i = 0; i < 4; i++) {
sprintf(temp, "%02x", atoi(s));
s = (uchar *)strchr((char *)s, '.') + 1;
strcat((char *)res, temp);
}
}
/************************************************************************
* Change 0xff (255), a dummy null char to 0x00.
*/
static void
change_null(uchar * s)
{
if (s != NULL) {
change_null((uchar *)strchr((char *)s + 1, 255));
*(strchr((char *)s, 255)) = '\0';
}
}
/************************************************************************
* Update environment variable name and values to u-boot standard.
*/
void
convert_env(void)
{
char *s; /* pointer to env value */
char temp[20]; /* temp storage for addresses */
/* E -> ethaddr */
s = getenv("E");
if (s != NULL) {
sprintf(temp, "%c%c.%c%c.%c%c.%c%c.%c%c.%c%c",
s[0], s[1], s[ 2], s[ 3],
s[4], s[5], s[ 6], s[ 7],
s[8], s[9], s[10], s[11] );
setenv("ethaddr", temp);
setenv("E", NULL);
}
/* L -> serial# */
s = getenv("L");
if (s != NULL) {
setenv("serial#", s);
setenv("L", NULL);
}
/* I -> ipaddr */
s = getenv("I");
if (s != NULL) {
sprintf(temp, "%d.%d.%d.%d", axtoi((u8 *)s), axtoi((u8 *)(s + 2)),
axtoi((u8 *)(s + 4)), axtoi((u8 *)(s + 6)));
setenv("ipaddr", temp);
setenv("I", NULL);
}
/* S -> serverip */
s = getenv("S");
if (s != NULL) {
sprintf(temp, "%d.%d.%d.%d", axtoi((u8 *)s), axtoi((u8 *)(s + 2)),
axtoi((u8 *)(s + 4)), axtoi((u8 *)(s + 6)));
setenv("serverip", temp);
setenv("S", NULL);
}
/* A -> bootargs */
s = getenv("A");
if (s != NULL) {
setenv("bootargs", s);
setenv("A", NULL);
}
/* F -> bootfile */
s = getenv("F");
if (s != NULL) {
setenv("bootfile", s);
setenv("F", NULL);
}
/* M -> bootcmd */
s = getenv("M");
if (s != NULL) {
setenv("bootcmd", s);
setenv("M", NULL);
}
/* Don't include C (CRC) */
setenv("C", NULL);
}
/************************************************************************
* Save user modified environment values back to EEPROM.
*/
static void
save_env(void)
{
char eprom[ENV_SIZE]; /* buffer to be written back to EEPROM */
char *s, temp[20];
char ff[] = { 0xff, 0x00 }; /* dummy null value */
u32 len; /* length of env to be written to EEPROM */
eprom[0] = 0x00;
/* ethaddr -> E */
s = getenv("ethaddr");
if (s != NULL) {
strcat(eprom, "E=");
sprintf(temp, "%c%c%c%c%c%c%c%c%c%c%c%c",
*s, *(s + 1), *(s + 3), *(s + 4), *(s + 6), *(s + 7),
*(s + 9), *(s + 10), *(s + 12), *(s + 13), *(s + 15),
*(s + 16));
strcat(eprom, temp);
strcat(eprom, ff);
}
/* serial# -> L */
s = getenv("serial#");
if (s != NULL) {
strcat(eprom, "L=");
strcat(eprom, s);
strcat(eprom, ff);
}
/* ipaddr -> I */
s = getenv("ipaddr");
if (s != NULL) {
strcat(eprom, "I=");
ip_ml300((uchar *)s, (uchar *)temp);
strcat(eprom, temp);
strcat(eprom, ff);
}
/* serverip -> S */
s = getenv("serverip");
if (s != NULL) {
strcat(eprom, "S=");
ip_ml300((uchar *)s, (uchar *)temp);
strcat(eprom, temp);
strcat(eprom, ff);
}
/* bootargs -> A */
s = getenv("bootargs");
if (s != NULL) {
strcat(eprom, "A=");
strcat(eprom, s);
strcat(eprom, ff);
}
/* bootfile -> F */
s = getenv("bootfile");
if (s != NULL) {
strcat(eprom, "F=");
strcat(eprom, s);
strcat(eprom, ff);
}
/* bootcmd -> M */
s = getenv("bootcmd");
if (s != NULL) {
strcat(eprom, "M=");
strcat(eprom, s);
strcat(eprom, ff);
}
len = strlen(eprom); /* find env length without crc */
change_null((uchar *)eprom); /* change 0xff to 0x00 */
/* update EEPROM env values if there is enough space */
if (update_crc(len, (uchar *)eprom) == 0)
send(CONFIG_ENV_OFFSET, (uchar *)eprom, len + 6);
}
/************************************************************************
* U-boot call for EEPROM read associated activities.
*/
int
i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
{
if (envStep == 0) {
/* first read call is for crc */
read_crc(buffer, len);
++envStep;
return 0;
} else if (envStep == 1) {
/* then read out EEPROM content for runtime u-boot CRC calculation */
receive(addr, buffer, len);
if (addr + len - CONFIG_ENV_OFFSET == CONFIG_ENV_SIZE)
/* end of runtime crc read */
++envStep;
return 0;
}
if (len < 2) {
/* when call getenv_r */
receive(addr, buffer, len);
} else if (addr + len < CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) {
/* calling env_relocate(), but don't read out
crc value from EEPROM */
receive(addr, buffer + 4, len);
} else {
receive(addr, buffer + 4, len - 4);
}
return 0;
}
/************************************************************************
* U-boot call for EEPROM write acativities.
*/
int
i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
{
/* save env on last page write called by u-boot */
if (addr + len >= CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
save_env();
return 0;
}
/************************************************************************
* Dummy function.
*/
int
i2c_probe(uchar chip)
{
return 1;
}
#endif

128
doc/README.ml300
View File

@ -1,128 +0,0 @@
Xilinx ML300 platform
=====================
0. Introduction
---------------
The Xilinx ML300 board is based on the Virtex-II Pro FPGA with
integrated AMCC PowerPC 405 core. The board is normally booted from
System ACE CF. U-Boot is then run out of main memory.
An FPGA is a configurable and thus very flexible device. To
accommodate for this flexibility this port of U-Boot includes the
required means to regenerate the drivers and configuration files if
you decide to change the hardware design. The required steps are
described below.
1. Requirements
---------------
To compile and run U-Boot on the Xilinx ML300 platform you need the
following items.
- A Xilinx ML300 platform (see http://www.xilinx.com/ml300)
- EDK and ISE development tools (shipping with ML300)
- Parallel4 cable (shipping with ML300)
- The EDK reference design for ML300. You can get this as design #6 from
http://www.xilinx.com/ise/embedded/edk_examples.htm
- A BOOTP/TFTP server
2. Quick Start
--------------
To compile and run U-Boot on ML300 follow the steps below. Make sure
to consult the documentation for U-Boot, EDK, and the EDK reference
design for ML300 if you have any questions.
1. Implement the EDK reference design for ML300. You can use any of
the project files, for example from a xygwin shell:
$ xps -nw system_linux.xmp
XPS% run init_bram
2. Configure and compile U-Boot. Change into the root directory of
U-Boot and run:
$ export CROSS_COMPILE=powerpc-eabi-
$ make ml300_config
$ make
3. Set up the ML300, connect the Parallel4 and the serial cable. Start
a terminal on your host computer and set the communication
parameters to 9600,8N1,no handshake.
4. Set up the BOOTP/TFTP server on your host machine. U-Boot is
preconfigured to use a fixed HW MAC address of 00:0A:35:00:22:01.
5. Download the bitstream to the ML300.
6. Use XMD to download and run U-Boot on the ML300:
$ xmd
XMD% ppcconnect
XMD% dow u-boot
XMD% run
You can now make an ACE file out of bitstream and U-Boot:
$ xmd genace.tcl -jprog -board ml300 -hw \
implementation/download.bit -elf u-boot -ace top.ace
Put the ACE file onto the MicroDrive, for example into xilinx/myace,
and reboot ML300.
3. Generating a Custom BSP for U-Boot
-------------------------------------
If you decide to change the EDK reference design for ML300 or if you
build a new design from scratch either with the Base System Builder in
XPS or all by hand you most likely will change the base addresses for
the Uart and the Ethernet peripheral. If you do so you will have two
options:
1. Edit boards/xilinx/ml300/xparameters.h to reflect the changes you
made to your hardware.
2. Use the MLD technology provided by Xilinx Platform Studio to make
the changes automatically. To do so go to the root directory of the
EDK reference design for ML300. Copy the Linux project file and the
Linux software configuration file:
$ cp system_linux.xmp system_uboot.xmp
$ cp system_linux.mss system_uboot.mss
Edit system_uboot.xmp and and have it point to system_uboot.mss for
the software configuration.
Then, copy the sw_services directory in
boards/xilinx/ml300/sw_services to the root directory of the EDK
reference design for ML300.
$ cp -R <uboot dir>/boards/xilinx/ml300/sw_services <edk dir>
Modify system_uboot.mss. Look for the Linux library definition
and change it to generate a BSP for U-Boot. An example, might look
like this:
BEGIN LIBRARY
PARAMETER LIBRARY_NAME = uboot
PARAMETER LIBRARY_VER = 1.00.a
PARAMETER CONNECTED_PERIPHS = (opb_uart16550_0,opb_ethernet_0)
PARAMETER TARGET_DIR = <uboot dir>
END
Now, you are ready to generate the Xilinx ML300 BSP for U-Boot:
$ xps -nw system_uboot.xmp
XPS% run libs
If all goes well the new configuration has been copied into the
right places within the U-Boot source tree. Recompile U-Boot and
run it on the ML300.
4. ToDo
-------
- Add support for all other peripherals on ML300.
- Read the MAC address out of the IIC EEPROM.
- Store the bootargs in the IIC EEPROM.
5. References
-------------
ML300: http://www.xilinx.com/ml300
EDK: http://www.xilinx.com/edk
ISE: http://www.xilinx.com/ise
Reference Design: http://www.xilinx.com/ise/embedded/edk_examples.htm

181
include/configs/ml300.h
View File

@ -1,181 +0,0 @@
/*
* ML300.h: ML300 specific config options
*
* http://www.xilinx.com/ml300
*
* Derived from : ML2.h
*
* Author: Xilinx, Inc.
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR
* OBTAINING ANY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS FOR A PARTICULAR PURPOSE.
*
*
* Xilinx products are not intended for use in life support appliances,
* devices, or systems. Use in such applications is expressly prohibited.
*
*
* (c) Copyright 2002 Xilinx Inc.
* All rights reserved.
*
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* #define DEBUG */
/* #define ET_DEBUG 1 */
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_405 1 /* This is a PPC405 CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
#define CONFIG_XILINX_405 1
#define CONFIG_XILINX_ML300 1 /* ...on a Xilinx ML300 board */
#define CONFIG_SYSTEMACE 1
#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_SYSTEMACE_BASE XPAR_OPB_SYSACE_0_BASEADDR
#define CONFIG_SYS_SYSTEMACE_WIDTH XPAR_XSYSACE_MEM_WIDTH
#define CONFIG_ENV_IS_IN_EEPROM 1 /* environment is in EEPROM */
/* following are used only if env is in EEPROM */
#ifdef CONFIG_ENV_IS_IN_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_ENV_OFFSET XPAR_PERSISTENT_0_IIC_0_BASEADDR
#define CONFIG_MISC_INIT_R 1 /* used to call out convert_env() */
#define CONFIG_ENV_OVERWRITE 1 /* allow users to update ethaddr and serial# */
#endif
#include "../board/xilinx/ml300/xparameters.h"
#define CONFIG_SYS_NO_FLASH 1 /* no flash */
#define CONFIG_ENV_SIZE XPAR_PERSISTENT_0_IIC_0_HIGHADDR - XPAR_PERSISTENT_0_IIC_0_BASEADDR + 1
#define CONFIG_BAUDRATE 9600
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
#define CONFIG_BOOTARGS "console=ttyS0,9600 ip=off " \
"root=/dev/xsysace/disc0/part3 rw"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_NET
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_FAT
#undef CONFIG_CMD_IMLS
/* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */
/* 300000000 */
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CONFIG_SYS_DUART_CHAN 0
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550 1
#define CONFIG_SYS_INIT_CHAN1 1
/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_MONITOR_BASE 0x04000000
#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
#define CONFIG_SYS_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */
#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#endif /* __CONFIG_H */