diff --git a/CHANGELOG b/CHANGELOG index beff98756..a752e01eb 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,11 @@ Changes for U-Boot 1.1.3: ====================================================================== +* Add configuration for IFM AEV FIFO board. + Minor coding style cleanup. + +* Add configuration for IFM SPI eval board + * Fix CompactFlash problem on HMI1001 board * Make new "mtdparts" code build with older compilers diff --git a/Makefile b/Makefile index fa7251b3d..ea476e394 100644 --- a/Makefile +++ b/Makefile @@ -359,6 +359,9 @@ spieval_config: unconfig echo "... with automatic CS configuration" @./mkconfig -a spieval ppc mpc5xxx tqm5200 +aev_config: unconfig + @./mkconfig -a aev ppc mpc5xxx tqm5200 + ######################################################################### ## MPC8xx Systems ######################################################################### diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index 43d89b060..90275ecd8 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -250,6 +250,10 @@ long int initdram (int board_type) int checkboard (void) { +#if defined (CONFIG_AEVFIFO) + puts ("Board: AEVFIFO\n"); + return 0; +#endif #if defined (CONFIG_TQM5200_AA) puts ("Board: TQM5200-AA (TQ-Components GmbH)\n"); #elif defined (CONFIG_TQM5200_AB) diff --git a/common/cmd_ace.c b/common/cmd_ace.c index 54fb9189f..fb4d3584b 100644 --- a/common/cmd_ace.c +++ b/common/cmd_ace.c @@ -31,7 +31,7 @@ * available to cmd_fat.c:get_dev and filling in a block device * description that has all the bits needed for FAT support to * read sectors. - * + * * According to Xilinx technical support, before accessing the * SystemACE CF you need to set the following control bits: * FORCECFGMODE : 1 diff --git a/common/cmd_flash.c b/common/cmd_flash.c index 5ad4226b8..d5be30c54 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -534,7 +534,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return rcode; } - + #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE) /* protect on/off */ if ((argc == 3) && (id_parse(argv[2], NULL, &dev_type, &dev_num) == 0)) { diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index 0c0643ccc..c4b739294 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -137,9 +137,9 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) __FUNCTION__); return FPGA_FAIL; } - swapsize = ((unsigned int) *dataptr <<24) + - ((unsigned int) *(dataptr+1) <<16) + - ((unsigned int) *(dataptr+2) <<8 ) + + swapsize = ((unsigned int) *dataptr <<24) + + ((unsigned int) *(dataptr+1) <<16) + + ((unsigned int) *(dataptr+2) <<8 ) + ((unsigned int) *(dataptr+3) ) ; dataptr+=4; printf(" bytes in bitstream = %d\n", swapsize); @@ -217,7 +217,7 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) PRINTF ("%s: device = %d\n", __FUNCTION__, dev); /* FIXME - this is a really weak test */ if ((argc == 3) && (dev > fpga_count ())) { /* must be buffer ptr */ - PRINTF ("%s: Assuming buffer pointer in arg 3\n", + PRINTF ("%s: Assuming buffer pointer in arg 3\n", __FUNCTION__); fpga_data = (void *) dev; PRINTF ("%s: fpga_data = 0x%x\n", diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c index 7f5ebf90e..16f5b7aea 100644 --- a/common/cmd_jffs2.c +++ b/common/cmd_jffs2.c @@ -45,7 +45,7 @@ * partition := * := ,part_num * - * + * * 'mtdids' - linux kernel mtd device id <-> u-boot device id mapping * * mtdids=[,,...] @@ -403,7 +403,7 @@ static int part_del(struct mtd_device *dev, struct part_info *part) return device_del(dev); /* otherwise just delete this partition */ - + if (dev == current_dev) { /* we are modyfing partitions for the current device, * update current */ @@ -416,7 +416,7 @@ static int part_del(struct mtd_device *dev, struct part_info *part) current_partnum = 0; current_save(); } else if (part->offset <= curr_pi->offset) { - current_partnum--; + current_partnum--; current_save(); } } @@ -471,7 +471,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part) list_add(&part->link, &dev->parts); return 0; } - + new_pi = list_entry(&part->link, struct part_info, link); /* get current partition info if we are updating current device */ @@ -492,7 +492,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part) if (new_pi->offset <= pi->offset) { list_add_tail(&part->link, entry); - + if (curr_pi && (pi->offset <= curr_pi->offset)) { /* we are modyfing partitions for the current * device, update current */ @@ -516,7 +516,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part) */ static int part_add(struct mtd_device *dev, struct part_info *part) { - /* verify alignment and size */ + /* verify alignment and size */ if (part_validate(dev->id, part) != 0) return 1; @@ -565,14 +565,14 @@ static int part_parse(const char *const partdef, const char **ret, struct part_i } } - /* check for offset */ + /* check for offset */ offset = OFFSET_NOT_SPECIFIED; if (*p == '@') { p++; offset = memsize_parse(p, &p); } - /* now look for the name */ + /* now look for the name */ if (*p == '(') { name = ++p; if ((p = strchr(name, ')')) == NULL) { @@ -591,7 +591,7 @@ static int part_parse(const char *const partdef, const char **ret, struct part_i name = NULL; } - /* test for options */ + /* test for options */ mask_flags = 0; if (strncmp(p, "ro", 2) == 0) { mask_flags |= MTD_WRITEABLE; @@ -823,8 +823,8 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_ printf("invalid mtd device '%.*s'\n", mtd_id_len - 1, mtd_id); return 1; } - - DEBUGF("dev type = %d (%s), dev num = %d, mtd-id = %s\n", + + DEBUGF("dev type = %d (%s), dev num = %d, mtd-id = %s\n", id->type, MTD_DEV_TYPE(id->type), id->num, id->mtd_id); pend = strchr(p, ';'); @@ -836,7 +836,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_ offset = 0; if ((dev = device_find(id->type, id->num)) != NULL) { - /* if device already exists start at the end of the last partition */ + /* if device already exists start at the end of the last partition */ part = list_entry(dev->parts.prev, struct part_info, link); offset = part->offset + part->size; } @@ -852,7 +852,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_ else offset = part->offset; - /* verify alignment and size */ + /* verify alignment and size */ if (part_validate(id, part) != 0) break; @@ -885,7 +885,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_ } else { printf("unexpected character '%c' at the end of device\n", *p); *ret = NULL; - return 1; + return 1; } } @@ -939,7 +939,7 @@ static struct mtdids* id_find(u8 type, u8 num) { struct list_head *entry; struct mtdids *id; - + list_for_each(entry, &mtdids) { id = list_entry(entry, struct mtdids, link); @@ -951,7 +951,7 @@ static struct mtdids* id_find(u8 type, u8 num) } /** - * Search global mtdids list and find id of a requested mtd_id. + * Search global mtdids list and find id of a requested mtd_id. * * Note: first argument is not null terminated. * @@ -963,7 +963,7 @@ static struct mtdids* id_find_by_mtd_id(const char *mtd_id, unsigned int mtd_id_ { struct list_head *entry; struct mtdids *id; - + DEBUGF("--- id_find_by_mtd_id: '%.*s' (len = %d)\n", mtd_id_len, mtd_id, mtd_id_len); @@ -1045,13 +1045,13 @@ static int generate_mtdparts(char *buf, u32 buflen) buf[0] = '\0'; return 0; } - + sprintf(p, "mtdparts="); p += 9; list_for_each(dentry, &devices) { dev = list_entry(dentry, struct mtd_device, link); - + /* copy mtd_id */ len = strlen(dev->id->mtd_id) + 1; if (len > maxlen) @@ -1078,8 +1078,8 @@ static int generate_mtdparts(char *buf, u32 buflen) memcpy(p, tmpbuf, len); p += len; maxlen -= len; - - + + /* add offset only when there is a gap between * partitions */ if ((!prev_part && (offset != 0)) || @@ -1107,7 +1107,7 @@ static int generate_mtdparts(char *buf, u32 buflen) *(p++) = ')'; maxlen -= len; } - + /* ro mask flag */ if (part->mask_flags && MTD_WRITEABLE) { len = 2; @@ -1188,7 +1188,7 @@ static void list_partitions(void) MTD_DEV_TYPE(dev->id->type), dev->id->num, dev->id->mtd_id, dev->num_parts); printf(" #: name\t\t\tsize\t\toffset\t\tmask_flags\n"); - + /* list partitions for given device */ part_num = 0; list_for_each(pentry, &dev->parts) { @@ -1256,7 +1256,7 @@ int find_dev_and_part(const char *id, struct mtd_device **dev, printf("unexpected trailing character '%c'\n", *p); return 1; } - + if ((*dev = device_find(type, dnum)) == NULL) { printf("no such device %s%d\n", MTD_DEV_TYPE(type), dnum); return 1; @@ -1328,7 +1328,7 @@ static int parse_mtdparts(const char *const mtdparts) /* re-read 'mtdparts' variable, devices_init may be updating env */ p = getenv("mtdparts"); - + if (strncmp(p, "mtdparts=", 9) != 0) { printf("mtdparts variable doesn't start with 'mtdparts='\n"); return err; @@ -1615,7 +1615,7 @@ int mtdparts_init(void) /** * Parse and initialize global mtdids mapping and create global - * device/partition list. + * device/partition list. * * @return 0 on success, 1 otherwise */ @@ -1870,7 +1870,7 @@ int do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* make sure we are in sync with env variables */ if (mtdparts_init() !=0) return 1; - + if ((part = jffs2_part_info(current_dev, current_partnum))){ /* check partition type for cramfs */ @@ -1968,7 +1968,7 @@ int do_jffs2_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) list_partitions(); return 0; } - + /* mtdparts add [@] [ro] */ if (((argc == 5) || (argc == 6)) && (strcmp(argv[1], "add") == 0)) { #define PART_ADD_DESC_MAXLEN 64 @@ -1998,7 +1998,7 @@ int do_jffs2_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } sprintf(tmpbuf, "%s:%s(%s)%s", - id->mtd_id, argv[3], argv[4], argv[5] ? argv[5] : ""); + id->mtd_id, argv[3], argv[4], argv[5] ? argv[5] : ""); DEBUGF("add tmpbuf: %s\n", tmpbuf); if ((device_parse(tmpbuf, NULL, &dev) != 0) || (!dev)) diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c index 5180107f4..667ae15e6 100644 --- a/fs/jffs2/jffs2_1pass.c +++ b/fs/jffs2/jffs2_1pass.c @@ -278,13 +278,13 @@ static inline void *get_node_mem_nor(u32 off) /* - * Generic jffs2 raw memory and node read routines. + * Generic jffs2 raw memory and node read routines. * */ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf) { struct mtdids *id = current_part->dev->id; - + #if (CONFIG_COMMANDS & CFG_CMD_FLASH) if (id->type == MTD_DEV_TYPE_NOR) return get_fl_mem_nor(off); @@ -302,7 +302,7 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf) static inline void *get_node_mem(u32 off) { struct mtdids *id = current_part->dev->id; - + #if (CONFIG_COMMANDS & CFG_CMD_FLASH) if (id->type == MTD_DEV_TYPE_NOR) return get_node_mem_nor(off); diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 3573b3711..1bcd88d20 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -694,7 +694,7 @@ /* No command line, one static partition, whole device */ #undef CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_DEV "nand0" -#define CONFIG_JFFS2_PART_SIZE 0x00100000 +#define CONFIG_JFFS2_PART_SIZE 0x00100000 #define CONFIG_JFFS2_PART_OFFSET 0x00200000 /* mtdparts command line support */ diff --git a/include/configs/aev.h b/include/configs/aev.h new file mode 100644 index 000000000..ca6e52b28 --- /dev/null +++ b/include/configs/aev.h @@ -0,0 +1,401 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ +#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ +#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */ +#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */ +#define CONFIG_AEVFIFO 1 +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + */ +#ifdef CONFIG_AEVFIFO +#define CONFIG_PCI 1 +#define CONFIG_PCI_PNP 1 +/* #define CONFIG_PCI_SCAN_SHOW 1 */ + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 + +#define CONFIG_NET_MULTI 1 +#define CONFIG_EEPRO100 1 +#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_NS8382X 1 +#endif /* CONFIG_AEVFIFO */ + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* POST support */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_I2C) + +#ifdef CONFIG_POST +#define CFG_CMD_POST_DIAG CFG_CMD_DIAG +/* preserve space for the post_word at end of on-chip SRAM */ +#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 +#else +#define CFG_CMD_POST_DIAG 0 +#endif + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + ADD_BMP_CMD | \ + CFG_CMD_PCI | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_MII | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_POST_DIAG | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SNTP ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CONFIG_TIMESTAMP /* display image timestamps */ + +#if (TEXT_BASE == 0xFC000000) /* Boot low */ +# define CFG_LOWBOOT 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath) " \ + "console=ttyS0,$(baudrate)\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "flash_self=run ramargs addip;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm $(kernel_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ + "bootfile=/tftpboot/tqm5200/uImage\0" \ + "load=tftp 200000 $(u-boot)\0" \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 $(filesize);" \ + "protect on FC000000 FC05FFFF\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run net_nfs" + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +#if defined(CFG_IPBSPEED_133) +/* + * PCI Bus clocking configuration + * + * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if + * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't + * been tested with a IPB Bus Clock of 66 MHz. + */ +#define CFG_PCISPEED_66 /* define for 66MHz speed */ +#endif + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#ifdef CONFIG_TQM5200_REV100 +#define CFG_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */ +#else +#define CFG_I2C_MODULE 2 /* Select I2C module #2 for all other revs */ +#endif + +/* + * I2C clock frequency + * + * Please notice, that the resulting clock frequency could differ from the + * configured value. This is because the I2C clock is derived from system + * clock over a frequency divider with only a few divider values. U-boot + * calculates the best approximation for CFG_I2C_SPEED. However the calculated + * approximation allways lies below the configured value, never above. + */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work + * also). For other EEPROMs configuration should be verified. On Mini-FAP the + * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the + * same configuration could be used. + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */ + +/* use CFI flash driver if no module variant is spezified */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ + +#if !defined(CFG_LOWBOOT) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000) +#else /* CFG_LOWBOOT */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) +#endif /* CFG_LOWBOOT */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +/* + * Define CONFIG_FEC_10MBIT to force FEC at 10Mb + */ +/* #define CONFIG_FEC_10MBIT 1 */ +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration + * + * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1): + * Bit 0 (mask: 0x80000000): 1 + * use ALT CAN position: Bits 2-3 (mask: 0x30000000): + * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. + * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. + * Use for REV200 STK52XX boards. Do not use with REV100 modules + * (because, there I2C1 is used as I2C bus) + * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 + * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) + * 000 -> All PSC2 pins are GIOPs + * 001 -> CAN1/2 on PSC2 pins + * Use for REV100 STK52xx boards + * use PSC6: + * on STK52xx: + * use as UART. Pins PSC6_0 to PSC6_3 are used. + * Bits 9:11 (mask: 0x00700000): + * 101 -> PSC6 : Extended POST test is not available + * on MINI-FAP and TQM5200_IB: + * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000): + * 000 -> PSC6 could not be used as UART, CODEC or IrDA + * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST + * tests. + */ +#define CFG_GPS_PORT_CONFIG 0x81500014 + +/* + * RTC configuration + */ +#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +/* Enable an alternate, more extensive memory test */ +#define CFG_ALT_MEMTEST + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, + * which is normally part of the default commands (CFV_CMD_DFL) + */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE +#else +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#ifdef CFG_PCISPEED_66 +#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ +#else +#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ +#endif +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* automatic configuration of chip selects */ +#ifdef CONFIG_CS_AUTOCONF +#define CONFIG_LAST_STAGE_INIT +#endif + +/* + * SRAM - Do not map below 2 GB in address space, because this area is used + * for SDRAM autosizing. + */ +#define CFG_CS2_START 0xE5000000 +#define CFG_CS2_SIZE 0x80000 /* 512 kByte */ +#define CFG_CS2_CFG 0x0004D930 + +/* + * Grafic controller - Do not map below 2 GB in address space, because this + * area is used for SDRAM autosizing. + */ +#define SM501_FB_BASE 0xE0000000 +#define CFG_CS1_START (SM501_FB_BASE) +#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ +#define CFG_CS1_CFG 0x8F48FF70 +#define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ + +#define CFG_RESET_ADDRESS 0xff000000 + +#endif /* __CONFIG_H */ diff --git a/include/linux/list.h b/include/linux/list.h index d2a7d43be..e6492f7a5 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -30,7 +30,7 @@ struct list_head { } while (0) /* - * Insert a new entry between two known consecutive entries. + * Insert a new entry between two known consecutive entries. * * This is only for internal list manipulation where we know * the prev/next entries already! @@ -103,7 +103,7 @@ static inline void list_del(struct list_head *entry) static inline void list_del_init(struct list_head *entry) { __list_del(entry->prev, entry->next); - INIT_LIST_HEAD(entry); + INIT_LIST_HEAD(entry); } /** @@ -113,8 +113,8 @@ static inline void list_del_init(struct list_head *entry) */ static inline void list_move(struct list_head *list, struct list_head *head) { - __list_del(list->prev, list->next); - list_add(list, head); + __list_del(list->prev, list->next); + list_add(list, head); } /** @@ -125,8 +125,8 @@ static inline void list_move(struct list_head *list, struct list_head *head) static inline void list_move_tail(struct list_head *list, struct list_head *head) { - __list_del(list->prev, list->next); - list_add_tail(list, head); + __list_del(list->prev, list->next); + list_add_tail(list, head); } /** @@ -195,7 +195,7 @@ static inline void list_splice_init(struct list_head *list, */ #define list_for_each(pos, head) \ for (pos = (head)->next, prefetch(pos->next); pos != (head); \ - pos = pos->next, prefetch(pos->next)) + pos = pos->next, prefetch(pos->next)) /** * list_for_each_prev - iterate over a list backwards * @pos: the &struct list_head to use as a loop counter. @@ -203,8 +203,8 @@ static inline void list_splice_init(struct list_head *list, */ #define list_for_each_prev(pos, head) \ for (pos = (head)->prev, prefetch(pos->prev); pos != (head); \ - pos = pos->prev, prefetch(pos->prev)) - + pos = pos->prev, prefetch(pos->prev)) + /** * list_for_each_safe - iterate over a list safe against removal of list entry * @pos: the &struct list_head to use as a loop counter. @@ -224,7 +224,7 @@ static inline void list_splice_init(struct list_head *list, #define list_for_each_entry(pos, head, member) \ for (pos = list_entry((head)->next, typeof(*pos), member), \ prefetch(pos->member.next); \ - &pos->member != (head); \ + &pos->member != (head); \ pos = list_entry(pos->member.next, typeof(*pos), member), \ prefetch(pos->member.next)) @@ -237,16 +237,16 @@ static inline void list_splice_init(struct list_head *list, */ #define list_for_each_entry_safe(pos, n, head, member) \ for (pos = list_entry((head)->next, typeof(*pos), member), \ - n = list_entry(pos->member.next, typeof(*pos), member); \ - &pos->member != (head); \ + n = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ pos = n, n = list_entry(n->member.next, typeof(*n), member)) /** - * list_for_each_entry_continue - iterate over list of given type - * continuing after existing point - * @pos: the type * to use as a loop counter. - * @head: the head for your list. - * @member: the name of the list_struct within the struct. + * list_for_each_entry_continue - iterate over list of given type + * continuing after existing point + * @pos: the type * to use as a loop counter. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. */ #define list_for_each_entry_continue(pos, head, member) \ for (pos = list_entry(pos->member.next, typeof(*pos), member), \