phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Cleanup: fix "MHz" spelling 

Signed-off-by: Wolfgang Denk <wd@denx.de>
This commit is contained in:
Wolfgang Denk 2008-10-19 02:35:50 +02:00
parent 08ef89ecd1
commit 8ed44d91c8
44 changed files with 98 additions and 98 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
board/Marvell/db64360/pci.c
View File

@ -52,13 +52,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
printf ("PCI %d bus mode: Conventional PCI\n", host);
break;
case 1:
printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
break;
case 2:
printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
break;
case 3:
printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
break;
default:
printf ("Unknown BUS %d\n", mode);

6
board/Marvell/db64460/pci.c
View File

@ -52,13 +52,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
printf ("PCI %d bus mode: Conventional PCI\n", host);
break;
case 1:
printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
break;
case 2:
printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
break;
case 3:
printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
break;
default:
printf ("Unknown BUS %d\n", mode);

18
board/amcc/katmai/cmd_katmai.c
View File

@ -57,9 +57,9 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
do {
#ifdef CONFIG_STRESS
printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n");
#else
printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n");
#endif
nbytes = readline (" ? ");
@ -87,11 +87,11 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else {
do {
if (strcmp(cpuClock, "400") == 0)
printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
printf("enter plb clock frequency 100, 133 MHz or quit to abort\n");
#ifdef CONFIG_STRESS
if (strcmp(cpuClock, "667") == 0)
printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
printf("enter plb clock frequency 133, 166 MHz or quit to abort\n");
#endif
nbytes = readline (" ? ");
@ -117,7 +117,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
do {
printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n");
nbytes = readline (" ? ");
if (strcmp(console_buffer, "quit") == 0)
@ -133,10 +133,10 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} while (nbytes == 0);
printf("\nsys clk = %sMhz\n", sysClock);
printf("cpu clk = %sMhz\n", cpuClock);
printf("plb clk = %sMhz\n", plbClock);
printf("Pci-X clk = %sMhz\n", pcixClock);
printf("\nsys clk = %s MHz\n", sysClock);
printf("cpu clk = %s MHz\n", cpuClock);
printf("plb clk = %s MHz\n", plbClock);
printf("Pci-X clk = %s MHz\n", pcixClock);
do {
printf("\npress [y] to write I2C bootstrap \n");

22
board/amcc/yucca/cmd_yucca.c
View File

@ -69,7 +69,7 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
chip = IIC0_ALT_BOOTPROM_ADDR;
do {
printf("enter sys clock frequency 33 or 66 Mhz or quit to abort\n");
printf("enter sys clock frequency 33 or 66 MHz or quit to abort\n");
nbytes = readline (" ? ");
if (strcmp(console_buffer, "quit") == 0)
@ -85,12 +85,12 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
do {
if (strcmp(sysClock, "66") == 0) {
printf("enter cpu clock frequency 400, 533 Mhz or quit to abort\n");
printf("enter cpu clock frequency 400, 533 MHz or quit to abort\n");
} else {
#ifdef CONFIG_STRESS
printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n");
#else
printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n");
#endif
}
nbytes = readline (" ? ");
@ -130,11 +130,11 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
} else {
do {
if (strcmp(cpuClock, "400") == 0)
printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
printf("enter plb clock frequency 100, 133 MHz or quit to abort\n");
#ifdef CONFIG_STRESS
if (strcmp(cpuClock, "667") == 0)
printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
printf("enter plb clock frequency 133, 166 MHz or quit to abort\n");
#endif
nbytes = readline (" ? ");
@ -160,7 +160,7 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
}
do {
printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n");
nbytes = readline (" ? ");
if (strcmp(console_buffer, "quit") == 0)
@ -176,10 +176,10 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
} while (nbytes == 0);
printf("\nsys clk = %sMhz\n", sysClock);
printf("cpu clk = %sMhz\n", cpuClock);
printf("plb clk = %sMhz\n", plbClock);
printf("Pci-X clk = %sMhz\n", pcixClock);
printf("\nsys clk = %s MHz\n", sysClock);
printf("cpu clk = %s MHz\n", cpuClock);
printf("plb clk = %s MHz\n", plbClock);
printf("Pci-X clk = %s MHz\n", pcixClock);
do {
printf("\npress [y] to write I2C bootstrap \n");

24
board/bf537-stamp/post-memory.c
View File

@ -27,18 +27,18 @@ const int pll[CCLK_NUM][SCLK_NUM][2] = {
{{4, 1}, {4, 2}, {4, 4}} /* CCLK = 100M */
};
const char *const log[CCLK_NUM][SCLK_NUM] = {
{"CCLK-500Mhz SCLK-125Mhz: Writing...\0",
"CCLK-500Mhz SCLK-100Mhz: Writing...\0",
"CCLK-500Mhz SCLK- 50Mhz: Writing...\0",},
{"CCLK-400Mhz SCLK-100Mhz: Writing...\0",
"CCLK-400Mhz SCLK- 80Mhz: Writing...\0",
"CCLK-400Mhz SCLK- 50Mhz: Writing...\0",},
{"CCLK-200Mhz SCLK-100Mhz: Writing...\0",
"CCLK-200Mhz SCLK- 50Mhz: Writing...\0",
"CCLK-200Mhz SCLK- 40Mhz: Writing...\0",},
{"CCLK-100Mhz SCLK-100Mhz: Writing...\0",
"CCLK-100Mhz SCLK- 50Mhz: Writing...\0",
"CCLK-100Mhz SCLK- 25Mhz: Writing...\0",},
{"CCLK-500MHz SCLK-125MHz: Writing...\0",
"CCLK-500MHz SCLK-100MHz: Writing...\0",
"CCLK-500MHz SCLK- 50MHz: Writing...\0",},
{"CCLK-400MHz SCLK-100MHz: Writing...\0",
"CCLK-400MHz SCLK- 80MHz: Writing...\0",
"CCLK-400MHz SCLK- 50MHz: Writing...\0",},
{"CCLK-200MHz SCLK-100MHz: Writing...\0",
"CCLK-200MHz SCLK- 50MHz: Writing...\0",
"CCLK-200MHz SCLK- 40MHz: Writing...\0",},
{"CCLK-100MHz SCLK-100MHz: Writing...\0",
"CCLK-100MHz SCLK- 50MHz: Writing...\0",
"CCLK-100MHz SCLK- 25MHz: Writing...\0",},
};
int memory_post_test(int flags)

8
board/cray/L1/L1.c
View File

@ -205,13 +205,13 @@ static void init_sdram (void)
/* To set the appropriate timings, we need to know the SDRAM speed. */
/* We can use the PLB speed since the SDRAM speed is the same as */
/* the PLB speed. The PLB speed is the FBK divider times the */
/* 405GP reference clock, which on the L1 is 25Mhz. */
/* Thus, if FBK div is 2, SDRAM is 50Mhz; if FBK div is 3, SDRAM is */
/* 150Mhz; if FBK is 3, SDRAM is 150Mhz. */
/* 405GP reference clock, which on the L1 is 25MHz. */
/* Thus, if FBK div is 2, SDRAM is 50MHz; if FBK div is 3, SDRAM is */
/* 150MHz; if FBK is 3, SDRAM is 150MHz. */
/* divisor = ((mfdcr(strap)>> 28) & 0x3); */
/* write SDRAM timing for 100Mhz. */
/* write SDRAM timing for 100MHz. */
mtdcr (memcfga, mem_sdtr1);
mtdcr (memcfgd, 0x0086400D);

2
board/eltec/bab7xx/misc.c
View File

@ -377,7 +377,7 @@ int misc_init_r (void)
{
if (pci_find_device(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C860, 0) > 0)
{
/* BAB740 with SCSI=IRQ 11; SCC=IRQ 9; no IDE; NCR860 at 80 Mhz */
/* BAB740 with SCSI=IRQ 11; SCC=IRQ 9; no IDE; NCR860 at 80 MHz */
scsi_dev_id = PCI_DEVICE_ID_NCR_53C860;
scsi_max_scsi_id = 7;
scsi_sym53c8xx_ccf = 0x15;

6
board/esd/cpci750/pci.c
View File

@ -66,13 +66,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
printf ("PCI %d bus mode: Conventional PCI\n", host);
break;
case 1:
printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
break;
case 2:
printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
break;
case 3:
printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
break;
default:
printf ("Unknown BUS %d\n", mode);

2
board/esd/pci405/pci405.c
View File

@ -347,7 +347,7 @@ int checkboard (void)
if (value) {
puts(", 33 MHz PCI");
} else {
puts(", 66 Mhz PCI");
puts(", 66 MHz PCI");
}
}

10
board/fads/fads.c
View File

@ -449,19 +449,19 @@ static int _initsdram(uint base, uint noMbytes)
/* Now run the precharge/nop/mrs commands.
*/
memctl->memc_mcr = 0x80808111; /* run umpb cs4 1 count 1, addr 0x11 ??? (50Mhz) */
/* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100Mhz) */
memctl->memc_mcr = 0x80808111; /* run umpb cs4 1 count 1, addr 0x11 ??? (50MHz) */
/* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */
udelay(200);
/* Run 8 refresh cycles */
memctl->memc_mcr = SDRAM_MCRVALUE0; /* run upmb cs4 loop 1 addr 0x5 precharge+MRS (50 Mhz)*/
memctl->memc_mcr = SDRAM_MCRVALUE0; /* run upmb cs4 loop 1 addr 0x5 precharge+MRS (50 MHz)*/
/* run upmb cs4 loop 1 addr 0x11 precharge+MRS (100MHz) */
udelay(200);
memctl->memc_mbmr = SDRAM_MBMRVALUE1; /* TLF 4 (100 Mhz) or TLF 8 (50MHz) */
memctl->memc_mcr = SDRAM_MCRVALUE1; /* run upmb cs4 loop 1 addr 0x30 refr (50 Mhz) */
memctl->memc_mbmr = SDRAM_MBMRVALUE1; /* TLF 4 (100 MHz) or TLF 8 (50MHz) */
memctl->memc_mcr = SDRAM_MCRVALUE1; /* run upmb cs4 loop 1 addr 0x30 refr (50 MHz) */
/* run upmb cs4 loop 1 addr 0x11 precharge+MRS ??? (100MHz) */
udelay(200);

4
board/freescale/mpc8540ads/mpc8540ads.c
View File

@ -127,8 +127,8 @@ local_bus_init(void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
* If localbus freq is < 66Mhz, DLL bypass mode must be used.
* If localbus freq is > 133Mhz, DLL can be safely enabled.
* If localbus freq is < 66MHz, DLL bypass mode must be used.
* If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/

4
board/freescale/mpc8541cds/mpc8541cds.c
View File

@ -302,8 +302,8 @@ local_bus_init(void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
* If localbus freq is < 66Mhz, DLL bypass mode must be used.
* If localbus freq is > 133Mhz, DLL can be safely enabled.
* If localbus freq is < 66MHz, DLL bypass mode must be used.
* If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/

4
board/freescale/mpc8555cds/mpc8555cds.c
View File

@ -302,8 +302,8 @@ local_bus_init(void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
* If localbus freq is < 66Mhz, DLL bypass mode must be used.
* If localbus freq is > 133Mhz, DLL can be safely enabled.
* If localbus freq is < 66MHz, DLL bypass mode must be used.
* If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/

4
board/freescale/mpc8560ads/mpc8560ads.c
View File

@ -331,8 +331,8 @@ local_bus_init(void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
* If localbus freq is < 66Mhz, DLL bypass mode must be used.
* If localbus freq is > 133Mhz, DLL can be safely enabled.
* If localbus freq is < 66MHz, DLL bypass mode must be used.
* If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/

2
board/gen860t/beeper.c
View File

@ -36,7 +36,7 @@
/*
* Initialize beeper-related hardware. Initialize timer 1 for use with
* the beeper. Use 66 Mhz internal clock with prescale of 33 to get
* the beeper. Use 66 MHz internal clock with prescale of 33 to get
* 1 uS period per count.
* FIXME: we should really compute the prescale based on the reported
* core clock frequency.

2
board/idmr/idmr.c
View File

@ -78,7 +78,7 @@ phys_size_t initdram (int board_type) {
MCF_GPIO_SDRAM_SDCS_01);
/*
* Wait 100us. We run the bus at 50Mhz, one cycle is 20ns. So 5
* Wait 100us. We run the bus at 50MHz, one cycle is 20ns. So 5
* iterations will do, but we do 10 just to be safe.
*/
for (i = 0; i < 10; ++i)

2
board/motionpro/motionpro.c
View File

@ -5,7 +5,7 @@
* modified for Promess PRO - by Andy Joseph, andy@promessdev.com
* modified for Promess PRO-Motion - by Robert McCullough, rob@promessdev.com
* modified by Chris M. Tumas 6/20/06 Change CAS latency to 2 from 3
* Also changed the refresh for 100Mhz operation
* Also changed the refresh for 100MHz operation
*
* See file CREDITS for list of people who contributed to this
* project.

2
board/mpc8540eval/mpc8540eval.c
View File

@ -100,7 +100,7 @@ phys_size_t initdram (int board_type)
#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
get_sys_info(&sysinfo);
/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
/* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
} else {

2
board/mpl/pip405/pip405.c
View File

@ -252,7 +252,7 @@ int board_early_init_f (void)
(datain[2] != 0x04) || /* if not SDRAM */
(!((datain[6] == 0x40) || (datain[6] == 0x48))) || /* or not (64 Bit or 72 Bit) */
(datain[7] != 0x00) || (datain[8] != 0x01) || /* or not LVTTL signal levels */
(datain[126] == 0x66)) /* or a 66Mhz modules */
(datain[126] == 0x66)) /* or a 66MHz modules */
SDRAM_err ("unsupported SDRAM");
#ifdef SDRAM_DEBUG
serial_puts ("SDRAM sanity ok\n");

4
board/pm854/pm854.c
View File

@ -144,8 +144,8 @@ local_bus_init(void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
* If localbus freq is < 66Mhz, DLL bypass mode must be used.
* If localbus freq is > 133Mhz, DLL can be safely enabled.
* If localbus freq is < 66MHz, DLL bypass mode must be used.
* If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/

4
board/pm856/pm856.c
View File

@ -300,8 +300,8 @@ local_bus_init(void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
* If localbus freq is < 66Mhz, DLL bypass mode must be used.
* If localbus freq is > 133Mhz, DLL can be safely enabled.
* If localbus freq is < 66MHz, DLL bypass mode must be used.
* If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/

6
board/prodrive/p3mx/pci.c
View File

@ -66,13 +66,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
printf ("PCI %d bus mode: Conventional PCI\n", host);
break;
case 1:
printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
break;
case 2:
printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
break;
case 3:
printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
break;
default:
printf ("Unknown BUS %d\n", mode);

2
board/sbc8560/sbc8560.c
View File

@ -297,7 +297,7 @@ phys_size_t initdram (int board_type)
#if 0
#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
get_sys_info(&sysinfo);
/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
/* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
} else {

2
board/siemens/IAD210/IAD210.c
View File

@ -240,7 +240,7 @@ int board_early_init_f (void)
iop->iop_padir = 0x0800;
/* start timer 2 for the 4hz LED blink rate */
timers->cpmt_tmr2 = 0xff2c; /* 4hz for 64mhz */
timers->cpmt_tmr2 = 0xff2c; /* 4HZ for 64MHz */
timers->cpmt_trr2 = 0x000003d0; /* clk/16 , prescale=256 */
timers->cpmt_tgcr = 0x00000810; /* run timer 2 */

2
board/siemens/IAD210/atm.c
View File

@ -579,7 +579,7 @@ void atmUtpInit()
/* 11 = divide by 7 */
/* */
/* Note that the UTOPIA clock must be programmed as to operate */
/* within the range SYSCLK/10 .. 50Mhz. */
/* within the range SYSCLK/10 .. 50MHz. */
/*-----------------------------------------------------------------*/
car->car_sccr &= 0xFFFFFFE0;
car->car_sccr |= 0x00000008; /* UTPCLK = SYSCLK / 4 */

4
board/tqc/tqm85xx/tqm85xx.c
View File

@ -458,8 +458,8 @@ void local_bus_init (void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
* If localbus freq is < 66Mhz, DLL bypass mode must be used.
* If localbus freq is > 133Mhz, DLL can be safely enabled.
* If localbus freq is < 66MHz, DLL bypass mode must be used.
* If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/

2
cpu/ixp/npe/miiphy.c
View File

@ -32,7 +32,7 @@
| Date Description of Change BY
| --------- --------------------- ---
| 05-May-99 Created MKW
| 01-Jul-99 Changed clock setting of sta_reg from 66Mhz to 50Mhz to
| 01-Jul-99 Changed clock setting of sta_reg from 66MHz to 50MHz to
| better match OPB speed. Also modified delay times. JWB
| 29-Jul-99 Added Full duplex support MKW
| 24-Aug-99 Removed printf from dp83843_duplex() JWB

4
cpu/mips/incaip_clock.c
View File

@ -33,8 +33,8 @@
*
* RETURNS:
* 150.000.000 for 150 MHz
* 133.333.333 for 133 Mhz (= 400MHz/3)
* 100.000.000 for 100 Mhz (= 400MHz/4)
* 133.333.333 for 133 MHz (= 400MHz/3)
* 100.000.000 for 100 MHz (= 400MHz/4)
* NOTE:
* This functions should be used by the hardware driver to get the correct
* frequency of the CPU. Don't use the macros, which are set to init the CPU

2
cpu/mpc8220/i2cCore.c
View File

@ -440,7 +440,7 @@ STATUS i2c_write2byte (SI2C * pi2c, UINT16 * writeb)
return OK;
}
/* FDR table base on 33Mhz - more detail please refer to Odini2c_dividers.xls
/* FDR table base on 33MHz - more detail please refer to Odini2c_dividers.xls
FDR FDR scl sda scl2tap2
510 432 tap tap tap tap scl_per sda_hold I2C Freq 0 1 2 3 4 5
000 000 9 3 4 1 28 Clocks 9 Clocks 1190 KHz 0 0 0 0 0 0

4
cpu/mpc83xx/spd_sdram.c
View File

@ -314,7 +314,7 @@ long int spd_sdram()
+ (spd.clk_cycle & 0x0f));
max_data_rate = max_bus_clk * 2;
debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate);
debug("DDR:Module maximum data rate is: %d MHz\n", max_data_rate);
ddrc_clk = gd->mem_clk / 1000000;
effective_data_rate = 0;
@ -401,7 +401,7 @@ long int spd_sdram()
}
}
debug("DDR:Effective data rate is: %dMhz\n", effective_data_rate);
debug("DDR:Effective data rate is: %dMHz\n", effective_data_rate);
debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat);
/*

2
cpu/mpc8xx/fec.c
View File

@ -398,7 +398,7 @@ static void fec_pin_init(int fecidx)
* * the MII management interface clock must be less than or equal
* * to 2.5 MHz.
* * This MDC frequency is equal to system clock / (2 * MII_SPEED).
* * Then MII_SPEED = system_clock / 2 * 2,5 Mhz.
* * Then MII_SPEED = system_clock / 2 * 2,5 MHz.
*
* All MII configuration is done via FEC1 registers:
*/

2
cpu/mpc8xx/serial.c
View File

@ -70,7 +70,7 @@ static void serial_setdivisor(volatile cpm8xx_t *cp)
int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate;
if(divisor/16>0x1000) {
/* bad divisor, assume 50Mhz clock and 9600 baud */
/* bad divisor, assume 50MHz clock and 9600 baud */
divisor=(50*1000*1000 + 8*9600)/16/9600;
}

2
cpu/ppc4xx/4xx_pci.c
View File

@ -286,7 +286,7 @@ void pci_405gp_init(struct pci_controller *hose)
#endif /* CONFIG_SYS_PCI_CLASSCODE */
/*--------------------------------------------------------------------------+
* If PCI speed = 66Mhz, set 66Mhz capable bit.
* If PCI speed = 66MHz, set 66MHz capable bit.
*--------------------------------------------------------------------------*/
if (bd->bi_pci_busfreq >= 66000000) {
pci_read_config_word(PCIDEVID_405GP, PCI_STATUS, &temp_short);

2
cpu/ppc4xx/miiphy.c
View File

@ -301,7 +301,7 @@ static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
/* set clock (50MHz) and read flags */
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \

2
cpu/ppc4xx/speed.c
View File

@ -148,7 +148,7 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
* is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
* to make sure it is within the proper range.
* spec: VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
* Note freqVCO is calculated in Mhz to avoid errors introduced by rounding.
* Note freqVCO is calculated in MHz to avoid errors introduced by rounding.
*/
if (sysInfo->pllFwdDiv == 1) {
sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;

2
cpu/s3c44b0/cpu.c
View File

@ -256,7 +256,7 @@ void i2c_init(int speed, int slaveaddr)
/*
Enable ACK, IICCLK=MCLK/16, enable interrupt
75Mhz/16/(12+1) = 390625 Hz
75MHz/16/(12+1) = 390625 Hz
*/
rIICCON=(1<<7)|(0<<6)|(1<<5)|(0xC);
IICCON = rIICCON;

4
drivers/block/sym53c8xx.c
View File

@ -836,10 +836,10 @@ void scsi_chip_init(void)
scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */
scsi_write_byte(SCNTL1,0x00);
scsi_write_byte(SCNTL2,0x00);
#ifndef CONFIG_SYS_SCSI_SYM53C8XX_CCF /* config value for none 40 mhz clocks */
#ifndef CONFIG_SYS_SCSI_SYM53C8XX_CCF /* config value for none 40 MHz clocks */
scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */
#else
scsi_write_byte(SCNTL3,CONFIG_SYS_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */
scsi_write_byte(SCNTL3,CONFIG_SYS_SCSI_SYM53C8XX_CCF); /* config value for none 40 MHz clocks */
#endif
scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */
scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */

2
drivers/i2c/omap1510_i2c.c
View File

@ -32,7 +32,7 @@ void i2c_init (int speed, int slaveadd)
udelay (5000);
}
/* 12Mhz I2C module clock */
/* 12MHz I2C module clock */
outw (0, I2C_PSC);
outw (I2C_CON_EN, I2C_CON);
outw (0, I2C_SYSTEST);

2
drivers/i2c/omap24xx_i2c.c
View File

@ -45,7 +45,7 @@ void i2c_init (int speed, int slaveadd)
udelay (50000);
}
/* 12Mhz I2C module clock */
/* 12MHz I2C module clock */
outw (0, I2C_PSC);
speed = speed/1000; /* 100 or 400 */
scl = ((12000/(speed*2)) - 7); /* use 7 when PSC = 0 */

2
drivers/net/natsemi.c
View File

@ -409,7 +409,7 @@ natsemi_initialize(bd_t * bis)
The EEPROM code is for common 93c06/46 EEPROMs w/ 6bit addresses. */
/* Delay between EEPROM clock transitions.
No extra delay is needed with 33Mhz PCI, but future 66Mhz
No extra delay is needed with 33MHz PCI, but future 66MHz
access may need a delay. */
#define eeprom_delay(ee_addr) INL(dev, ee_addr)

2
drivers/net/ns8382x.c
View File

@ -445,7 +445,7 @@ ns8382x_initialize(bd_t * bis)
Read and write MII registers using software-generated serial MDIO
protocol. See the MII specifications or DP83840A data sheet for details.
The maximum data clock rate is 2.5 Mhz. To meet minimum timing we
The maximum data clock rate is 2.5 MHz. To meet minimum timing we
must flush writes to the PCI bus with a PCI read. */
#define mdio_delay(mdio_addr) INL(dev, mdio_addr)

2
drivers/net/rtl8139.c
View File

@ -287,7 +287,7 @@ static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
/*
Delay between EEPROM clock transitions.
No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
No extra delay is needed with 33MHz PCI, but 66MHz may change this.
*/
#define eeprom_delay() inl(ee_addr)

2
drivers/net/tigon3.c
View File

@ -2247,7 +2247,7 @@ LM_STATUS LM_ResetAdapter (PLM_DEVICE_BLOCK pDevice)
REG_WR (pDevice, Grc.Mode, Value32);
/* Setup the timer prescalar register. */
REG_WR (pDevice, Grc.MiscCfg, 65 << 1); /* Clock is alwasy 66Mhz. */
REG_WR (pDevice, Grc.MiscCfg, 65 << 1); /* Clock is alwasy 66MHz. */
/* Set up the MBUF pool base address and size. */
REG_WR (pDevice, BufMgr.MbufPoolAddr, pDevice->MbufBase);

2
drivers/usb/usbdcore_mpc8xx.c
View File

@ -1227,7 +1227,7 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
return;
}
/* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48Mhz)
/* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48MHz)
* but, can /probably/ live with close-ish alternative rates.
*/
divisor = (gd->cpu_clk / 48000000L) - 1;