FSL DDR: Convert SBC8560 to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Kumar Gala
parent
9658bec2e8
commit
8e55313b7a
|
|
@ -28,10 +28,13 @@ include $(TOPDIR)/config.mk
|
|||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS := $(BOARD).o law.o tlb.o
|
||||
COBJS-y += $(BOARD).o
|
||||
COBJS-y += law.o
|
||||
COBJS-y += tlb.o
|
||||
COBJS-$(CONFIG_FSL_DDR1) += ddr.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS-y))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,70 @@
|
|||
/*
|
||||
* Copyright 2008 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* Version 2 as published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <i2c.h>
|
||||
|
||||
#include <asm/fsl_ddr_sdram.h>
|
||||
|
||||
static void
|
||||
get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
|
||||
{
|
||||
i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t));
|
||||
}
|
||||
|
||||
|
||||
unsigned int
|
||||
fsl_ddr_get_mem_data_rate(void)
|
||||
{
|
||||
return get_ddr_freq(0);
|
||||
}
|
||||
|
||||
|
||||
void
|
||||
fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
|
||||
unsigned int ctrl_num)
|
||||
{
|
||||
unsigned int i;
|
||||
unsigned int i2c_address = 0;
|
||||
|
||||
for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
|
||||
if (ctrl_num == 0 && i == 0) {
|
||||
i2c_address = SPD_EEPROM_ADDRESS;
|
||||
}
|
||||
get_spd(&(ctrl_dimms_spd[i]), i2c_address);
|
||||
}
|
||||
}
|
||||
|
||||
void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
|
||||
{
|
||||
/*
|
||||
* Factors to consider for CPO:
|
||||
* - frequency
|
||||
* - ddr1 vs. ddr2
|
||||
*/
|
||||
popts->cpo_override = 0;
|
||||
|
||||
/*
|
||||
* Factors to consider for write data delay:
|
||||
* - number of DIMMs
|
||||
*
|
||||
* 1 = 1/4 clock delay
|
||||
* 2 = 1/2 clock delay
|
||||
* 3 = 3/4 clock delay
|
||||
* 4 = 1 clock delay
|
||||
* 5 = 5/4 clock delay
|
||||
* 6 = 3/2 clock delay
|
||||
*/
|
||||
popts->write_data_delay = 3;
|
||||
|
||||
/*
|
||||
* Factors to consider for half-strength driver enable:
|
||||
* - number of DIMMs installed
|
||||
*/
|
||||
popts->half_strength_driver_enable = 0;
|
||||
}
|
||||
|
|
@ -29,7 +29,9 @@
|
|||
|
||||
#include <common.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/mmu.h>
|
||||
#include <asm/immap_85xx.h>
|
||||
#include <asm/fsl_ddr_sdram.h>
|
||||
#include <ioports.h>
|
||||
#include <spd_sdram.h>
|
||||
#include <miiphy.h>
|
||||
|
|
@ -283,7 +285,9 @@ phys_size_t initdram (int board_type)
|
|||
#endif
|
||||
|
||||
#if defined(CONFIG_SPD_EEPROM)
|
||||
dram_size = spd_sdram ();
|
||||
dram_size = fsl_ddr_sdram();
|
||||
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
|
||||
dram_size *= 0x100000;
|
||||
#else
|
||||
dram_size = fixed_sdram ();
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -74,7 +74,6 @@ SECTIONS
|
|||
cpu/mpc85xx/cpu_init.o (.text)
|
||||
cpu/mpc85xx/cpu.o (.text)
|
||||
cpu/mpc85xx/speed.o (.text)
|
||||
cpu/mpc85xx/spd_sdram.o (.text)
|
||||
common/dlmalloc.o (.text)
|
||||
lib_generic/crc32.o (.text)
|
||||
lib_ppc/extable.o (.text)
|
||||
|
|
|
|||
|
|
@ -103,18 +103,34 @@
|
|||
#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
|
||||
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
|
||||
|
||||
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
|
||||
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
|
||||
#define CFG_SDRAM_SIZE 512 /* DDR is 512MB */
|
||||
#define SPD_EEPROM_ADDRESS 0x55 /* DDR DIMM */
|
||||
|
||||
/* DDR Setup */
|
||||
#define CONFIG_FSL_DDR1
|
||||
#undef CONFIG_FSL_DDR_INTERACTIVE
|
||||
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
||||
#undef CONFIG_DDR_SPD
|
||||
|
||||
#if defined(CONFIG_MPC85xx_REV1)
|
||||
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
||||
#endif
|
||||
|
||||
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
|
||||
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
|
||||
|
||||
#define CFG_DDR_SDRAM_BASE 0x00000000
|
||||
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
|
||||
#define CONFIG_VERY_BIG_RAM
|
||||
|
||||
#define CONFIG_NUM_DDR_CONTROLLERS 1
|
||||
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
|
||||
#define CONFIG_CHIP_SELECTS_PER_CTRL 2
|
||||
|
||||
/* I2C addresses of SPD EEPROMs */
|
||||
#define SPD_EEPROM_ADDRESS 0x55 /* CTLR 0 DIMM 0 */
|
||||
|
||||
#undef CONFIG_CLOCKS_IN_MHZ
|
||||
|
||||
#if defined(CONFIG_RAM_AS_FLASH)
|
||||
|
|
|
|||
|
|
@ -97,18 +97,34 @@
|
|||
#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
|
||||
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
|
||||
|
||||
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
|
||||
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
|
||||
#define CFG_SDRAM_SIZE 512 /* DDR is 512MB */
|
||||
#define SPD_EEPROM_ADDRESS 0x55 /* DDR DIMM */
|
||||
|
||||
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
||||
/* DDR Setup */
|
||||
#define CONFIG_FSL_DDR1
|
||||
#undef CONFIG_FSL_DDR_INTERACTIVE
|
||||
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
||||
#undef CONFIG_DDR_SPD
|
||||
|
||||
#if defined(CONFIG_MPC85xx_REV1)
|
||||
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
||||
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
||||
#endif
|
||||
|
||||
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
|
||||
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
|
||||
|
||||
#define CFG_DDR_SDRAM_BASE 0x00000000
|
||||
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
|
||||
#define CONFIG_VERY_BIG_RAM
|
||||
|
||||
#define CONFIG_NUM_DDR_CONTROLLERS 1
|
||||
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
|
||||
#define CONFIG_CHIP_SELECTS_PER_CTRL 2
|
||||
|
||||
/* I2C addresses of SPD EEPROMs */
|
||||
#define SPD_EEPROM_ADDRESS 0x55 /* CTLR 0 DIMM 0 */
|
||||
|
||||
#undef CONFIG_CLOCKS_IN_MHZ
|
||||
|
||||
#if defined(CONFIG_RAM_AS_FLASH)
|
||||
|
|
|
|||
Loading…
Reference in New Issue