phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Major cleanup for AMCC PPC4xx eval boards. 

Patch by Stefan Roese, 01 Aug 2005
master
Stefan Roese 2005-08-01 16:49:12 +02:00 committed by Stefan Roese
parent c157d8e219
commit 8a316c9b62
54 changed files with 2700 additions and 3853 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
CHANGELOG
View File

@ -2,6 +2,18 @@
Changes for U-Boot 1.1.3:
======================================================================
* Patch by Stefan Roese, 01 Aug 2005:
- Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
(former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
for details.
- Sycamore (PPC405GPr) eval board added (Walnut port is extended
to run on both 405GP and 405GPr eval boards).
* Patch by Steven Blakeslee, 27 Jul 2005:
- Add support for AMCC PPC440EP/GR.
- Add support for AMCC Yosemite PPC440EP eval board.
- Add support for AMCC Yellowstone PPC440GR eval board.
* Fix sysmon POST problem: check I2C error codes
This fixes a problem of displaying bogus voltages when the voltages
are so low that the I2C devices start failing while the rest of the

6
MAINTAINERS
View File

@ -210,6 +210,11 @@ Keith Outwater <Keith_Outwater@mvis.com>
GEN860T MPC860T
GEN860T_SC MPC860T
Stefan Roese <sr@denx.de>
sycamore PPC4xx
walnut PPC4xx
Frank Panno <fpanno@delphintech.com>
ep8260 MPC8260
@ -327,7 +332,6 @@ Unknown / orphaned boards:
CRAYL1 PPC4xx
ERIC PPC4xx
WALNUT405 PPC4xx
MOUSSE MPC824x

9
MAKEALL
View File

@ -60,16 +60,17 @@ LIST_8xx=" \
#########################################################################
LIST_4xx=" \
ADCIOP AR405 ASH405 BUBINGA405EP \
ADCIOP AR405 ASH405 bubinga \
CANBT CPCI405 CPCI4052 CPCI405AB \
CPCI440 CPCIISER4 CRAYL1 csb272 \
csb472 DASA_SIM DP405 DU405 \
EBONY ERIC EXBITGEN HUB405 \
ebony ERIC EXBITGEN HUB405 \
JSE MIP405 MIP405T ML2 \
ml300 OCOTEA OCRTC ORSG \
ml300 ocotea OCRTC ORSG \
PCI405 PIP405 PLU405 PMC405 \
PPChameleonEVB VOH405 W7OLMC W7OLMG \
WALNUT405 WUH405 XPEDITE1K \
walnut WUH405 XPEDITE1K yellowstone \
yosemite \
"
#########################################################################

29
Makefile
View File

@ -707,8 +707,11 @@ AR405_config: unconfig
ASH405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
BUBINGA405EP_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
bamboo_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
bubinga_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc
CANBT_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
@ -759,8 +762,8 @@ DP405_config: unconfig
DU405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx du405 esd
EBONY_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ebony
ebony_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ebony amcc
ERIC_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx eric
@ -794,8 +797,8 @@ ML2_config: unconfig
ml300_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
OCOTEA_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ocotea
ocotea_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc
OCRTC_config \
ORSG_config: unconfig
@ -846,6 +849,10 @@ PPChameleonEVB_HI_33_config: unconfig
sbc405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx sbc405
sycamore_config: unconfig
@echo "Configuring for sycamore board as subset of walnut..."
@./mkconfig -a walnut ppc ppc4xx walnut amcc
VOH405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
@ -856,8 +863,8 @@ W7OLMC_config \
W7OLMG_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx w7o
WALNUT405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx walnut405
walnut_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx walnut amcc
WUH405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
@ -865,6 +872,12 @@ WUH405_config: unconfig
XPEDITE1K_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
yosemite_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
yellowstone_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
#########################################################################
## MPC8220 Systems
#########################################################################

6
README
View File

@ -295,7 +295,7 @@ The following options need to be configured:
CONFIG_FADS823 CONFIG_NETVIA CONFIG_V37
CONFIG_FADS850SAR CONFIG_NX823 CONFIG_W7OLMC
CONFIG_FADS860T CONFIG_OCRTC CONFIG_W7OLMG
CONFIG_FLAGADM CONFIG_ORSG CONFIG_WALNUT405
CONFIG_FLAGADM CONFIG_ORSG CONFIG_WALNUT
CONFIG_FPS850L CONFIG_OXC CONFIG_ZPC1900
CONFIG_FPS860L CONFIG_ZUMA
@ -2192,7 +2192,7 @@ configurations; the following names are supported:
FADS850SAR_config omap1610h2_config TQM850L_config
FADS860T_config omap1610inn_config TQM855L_config
FPS850L_config omap5912osk_config TQM860L_config
omap2420h4_config WALNUT405_config
omap2420h4_config walnut_config
Yukon8220_config
ZPC1900_config
@ -3135,7 +3135,7 @@ locked as (mis-) used as memory, etc.
CFG_INIT_RAM_ADDR should be somewhere that won't interfere
with your processor/board/system design. The default value
you will find in any recent u-boot distribution in
Walnut405.h should work for you. I'd set it to a value larger
walnut.h should work for you. I'd set it to a value larger
than your SDRAM module. If you have a 64MB SDRAM module, set
it above 400_0000. Just make sure your board has no resources
that are supposed to respond to that address! That code in

48
board/amcc/bamboo/Makefile Normal file
View File

@ -0,0 +1,48 @@
#
# (C) Copyright 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o
#OBJS += flash.o
SOBJS = init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
sinclude .depend
#########################################################################

439
board/amcc/bamboo/bamboo.c Normal file
View File

@ -0,0 +1,439 @@
/*
* (C) Copyright 2005
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <spd_sdram.h>
int board_early_init_f(void)
{
register uint reg;
/*--------------------------------------------------------------------
* Setup the external bus controller/chip selects
*-------------------------------------------------------------------*/
mtdcr(ebccfga, xbcfg);
reg = mfdcr(ebccfgd);
mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
#if 0 /* test-only */
mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
mtebc(pb0cr, 0xfe0ba000); /* BAS=0xfe0 32MB r/w 16-bit */
mtebc(pb1ap, 0x00000000);
mtebc(pb1cr, 0x00000000);
mtebc(pb2ap, 0x04814500);
/*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
#else
mtebc(pb0ap, 0x04055200); /* FLASH/SRAM */
mtebc(pb0cr, 0xfff18000); /* BAS=0xfe0 1MB r/w 8-bit */
#endif
mtebc(pb3ap, 0x00000000);
mtebc(pb3cr, 0x00000000);
mtebc(pb4ap, 0x00000000);
mtebc(pb4cr, 0x00000000);
mtebc(pb5ap, 0x00000000);
mtebc(pb5cr, 0x00000000);
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
mtdcr(uic0sr, 0xffffffff); /* clear all */
mtdcr(uic0er, 0x00000000); /* disable all */
mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
mtdcr(uic0sr, 0xffffffff); /* clear all */
mtdcr(uic1sr, 0xffffffff); /* clear all */
mtdcr(uic1er, 0x00000000); /* disable all */
mtdcr(uic1cr, 0x00000000); /* all non-critical */
mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
mtdcr(uic1sr, 0xffffffff); /* clear all */
/*--------------------------------------------------------------------
* Setup the GPIO pins
*-------------------------------------------------------------------*/
/*CPLD cs */
/*setup Address lines for flash sizes larger than 16Meg. */
out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
/*setup emac */
out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
/*UART1 */
out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
/*setup USB 2.0 */
out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
/*--------------------------------------------------------------------
* Setup other serial configuration
*-------------------------------------------------------------------*/
mfsdr(sdr_pci0, reg);
mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */
mtsdr(sdr_pfc0, 0x00003e00); /* Pin function */
mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */
#if 0 /* test-only */
/*clear tmrclk divisor */
*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
/*enable ethernet */
*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
/*enable usb 1.1 fs device and remove usb 2.0 reset */
*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
/*get rid of flash write protect */
*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
#endif
return 0;
}
int checkboard(void)
{
sys_info_t sysinfo;
unsigned char *s = getenv("serial#");
get_sys_info(&sysinfo);
printf("Board: Bamboo - AMCC PPC440EP Evaluation Board");
if (s != NULL) {
puts(", serial# ");
puts(s);
}
putc('\n');
printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
printf("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
return (0);
}
/*************************************************************************
* sdram_init -- doesn't use serial presence detect.
*
* Assumes: 256 MB, ECC, non-registered
* PLB @ 133 MHz
*
************************************************************************/
void sdram_init(void)
{
register uint reg;
/*--------------------------------------------------------------------
* Setup some default
*------------------------------------------------------------------*/
mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
mtsdram(mem_clktr, 0x40000000); /* ?? */
mtsdram(mem_wddctr, 0x40000000); /* ?? */
/*clear this first, if the DDR is enabled by a debugger
then you can not make changes. */
mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */
/*--------------------------------------------------------------------
* Setup for board-specific specific mem
*------------------------------------------------------------------*/
/*
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */
mtsdram(mem_tr0, 0x410a4012); /* ?? */
mtsdram(mem_tr1, 0x8080080b); /* ?? */
mtsdram(mem_rtr, 0x04080000); /* ?? */
mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
mtsdram(mem_cfg0, 0x34000000); /* Disable EEC */
udelay(400); /* Delay 200 usecs (min) */
/*--------------------------------------------------------------------
* Enable the controller, then wait for DCEN to complete
*------------------------------------------------------------------*/
mtsdram(mem_cfg0, 0x84000000); /* Enable */
for (;;) {
mfsdram(mem_mcsts, reg);
if (reg & 0x80000000)
break;
}
}
/*************************************************************************
* long int initdram
*
************************************************************************/
long int initdram(int board)
{
sdram_init();
return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */
}
#if defined(CFG_DRAM_TEST)
int testdram(void)
{
unsigned long *mem = (unsigned long *)0;
const unsigned long kend = (1024 / sizeof(unsigned long));
unsigned long k, n;
mtmsr(0);
for (k = 0; k < CFG_KBYTES_SDRAM;
++k, mem += (1024 / sizeof(unsigned long))) {
if ((k & 1023) == 0) {
printf("%3d MB\r", k / 1024);
}
memset(mem, 0xaaaaaaaa, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0xaaaaaaaa) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
memset(mem, 0x55555555, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0x55555555) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
}
printf("SDRAM test passes\n");
return 0;
}
#endif
/*************************************************************************
* pci_pre_init
*
* This routine is called just prior to registering the hose and gives
* the board the opportunity to check things. Returning a value of zero
* indicates that things are bad & PCI initialization should be aborted.
*
* Different boards may wish to customize the pci controller structure
* (add regions, override default access routines, etc) or perform
* certain pre-initialization actions.
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
int pci_pre_init(struct pci_controller *hose)
{
unsigned long strap;
unsigned long addr;
/*--------------------------------------------------------------------------+
* Bamboo is always configured as the host & requires the
* PCI arbiter to be enabled.
*--------------------------------------------------------------------------*/
mfsdr(sdr_sdstp1, strap);
if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
printf("PCI: SDR0_STRP1[PAE] not set.\n");
printf("PCI: Configuration aborted.\n");
return 0;
}
/*-------------------------------------------------------------------------+
| Set priority for all PLB3 devices to 0.
| Set PLB3 arbiter to fair mode.
+-------------------------------------------------------------------------*/
mfsdr(sdr_amp1, addr);
mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb3_acr);
mtdcr(plb3_acr, addr | 0x80000000);
/*-------------------------------------------------------------------------+
| Set priority for all PLB4 devices to 0.
+-------------------------------------------------------------------------*/
mfsdr(sdr_amp0, addr);
mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
mtdcr(plb4_acr, addr);
/*-------------------------------------------------------------------------+
| Set Nebula PLB4 arbiter to fair mode.
+-------------------------------------------------------------------------*/
/* Segment0 */
addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
mtdcr(plb0_acr, addr);
/* Segment1 */
addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
mtdcr(plb1_acr, addr);
return 1;
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
/*************************************************************************
* pci_target_init
*
* The bootstrap configuration provides default settings for the pci
* inbound map (PIM). But the bootstrap config choices are limited and
* may not be sufficient for a given board.
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
/*--------------------------------------------------------------------------+
* Set up Direct MMIO registers
*--------------------------------------------------------------------------*/
/*--------------------------------------------------------------------------+
| PowerPC440 EP PCI Master configuration.
| Map one 1Gig range of PLB/processor addresses to PCI memory space.
| PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
| Use byte reversed out routines to handle endianess.
| Make this region non-prefetchable.
+--------------------------------------------------------------------------*/
out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
/*--------------------------------------------------------------------------+
* Set up Configuration registers
*--------------------------------------------------------------------------*/
/* Program the board's subsystem id/vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
CFG_PCI_SUBSYS_VENDORID);
pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
/* Configure command register as bus master */
pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
/* 240nS PCI clock */
pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
/* No error reporting */
pci_write_config_word(0, PCI_ERREN, 0);
pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
/*************************************************************************
* pci_master_init
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
/*--------------------------------------------------------------------------+
| Write the PowerPC440 EP PCI Configuration regs.
| Enable PowerPC440 EP to be a master on the PCI bus (PMM).
| Enable PowerPC440 EP to act as a PCI memory target (PTM).
+--------------------------------------------------------------------------*/
pci_read_config_word(0, PCI_COMMAND, &temp_short);
pci_write_config_word(0, PCI_COMMAND,
temp_short | PCI_COMMAND_MASTER |
PCI_COMMAND_MEMORY);
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
/*************************************************************************
* is_pci_host
*
* This routine is called to determine if a pci scan should be
* performed. With various hardware environments (especially cPCI and
* PPMC) it's insufficient to depend on the state of the arbiter enable
* bit in the strap register, or generic host/adapter assumptions.
*
* Rather than hard-code a bad assumption in the general 440 code, the
* 440 pci code requires the board to decide at runtime.
*
* Return 0 for adapter mode, non-zero for host (monarch) mode.
*
*
************************************************************************/
#if defined(CONFIG_PCI)
int is_pci_host(struct pci_controller *hose)
{
/* Bamboo is always configured as host. */
return (1);
}
#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* hw_watchdog_reset
*
* This routine is called to reset (keep alive) the watchdog timer
*
************************************************************************/
#if defined(CONFIG_HW_WATCHDOG)
void hw_watchdog_reset(void)
{
}
#endif

44
board/amcc/bamboo/config.mk Normal file
View File

@ -0,0 +1,44 @@
#
# (C) Copyright 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# esd ADCIOP boards
#
#TEXT_BASE = 0x00001000
ifeq ($(ramsym),1)
TEXT_BASE = 0xFBD00000
else
TEXT_BASE = 0xFFF80000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG
endif
ifeq ($(dbcr),1)
PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
endif

107
board/amcc/bamboo/init.S Normal file
View File

@ -0,0 +1,107 @@
/*
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <ppc_asm.tmpl>
#include <config.h>
/* General */
#define TLB_VALID 0x00000200
/* Supported page sizes */
#define SZ_1K 0x00000000
#define SZ_4K 0x00000010
#define SZ_16K 0x00000020
#define SZ_64K 0x00000030
#define SZ_256K 0x00000040
#define SZ_1M 0x00000050
#define SZ_8M 0x00000060
#define SZ_16M 0x00000070
#define SZ_256M 0x00000090
/* Storage attributes */
#define SA_W 0x00000800 /* Write-through */
#define SA_I 0x00000400 /* Caching inhibited */
#define SA_M 0x00000200 /* Memory coherence */
#define SA_G 0x00000100 /* Guarded */
#define SA_E 0x00000080 /* Endian */
/* Access control */
#define AC_X 0x00000024 /* Execute */
#define AC_W 0x00000012 /* Write */
#define AC_R 0x00000009 /* Read */
/* Some handy macros */
#define EPN(e) ((e) & 0xfffffc00)
#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
#define TLB2(a) ( (a)&0x00000fbf )
#define tlbtab_start\
mflr r1 ;\
bl 0f ;
#define tlbtab_end\
.long 0, 0, 0 ; \
0: mflr r0 ; \
mtlr r1 ; \
blr ;
#define tlbentry(epn,sz,rpn,erpn,attr)\
.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
/**************************************************************************
* TLB TABLE
*
* This table is used by the cpu boot code to setup the initial tlb
* entries. Rather than make broad assumptions in the cpu source tree,
* this table lets each board set things up however they like.
*
* Pointer to the table is returned in r1
*
*************************************************************************/
.section .bootpg,"ax"
.globl tlbtab
tlbtab:
tlbtab_start
/*
0xf0000000 must be first, before relocation SA_I must be off to use the
dcache as stack. It is patched after relocation to enable SA_I
*/
tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_NVRAM_BASE_ADDR, SZ_16K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
/* PCI */
tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
/* USB 2.0 Device */
tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
tlbtab_end

155
board/amcc/bamboo/u-boot.lds Normal file
View File

@ -0,0 +1,155 @@
/*
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_ARCH(powerpc)
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
.resetvec 0xFFFFFFFC :
{
*(.resetvec)
} = 0xffff
.bootpg 0xFFFFF000 :
{
cpu/ppc4xx/start.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
.rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
.rela.data : { *(.rela.data) }
.rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
.plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
board/amcc/bamboo/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
cpu/ppc4xx/serial.o (.text)
cpu/ppc4xx/cpu_init.o (.text)
cpu/ppc4xx/speed.o (.text)
cpu/ppc4xx/405gp_enet.o (.text)
common/dlmalloc.o (.text)
lib_generic/crc32.o (.text)
lib_ppc/extable.o (.text)
lib_generic/zlib.o (.text)
/* . = env_offset;*/
/* common/environment.o(.text)*/
*(.text)
*(.fixup)
*(.got1)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
*(.rodata)
*(.rodata1)
*(.rodata.str1.4)
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
*(.got)
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
*(.fixup)
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
*(.data)
*(.data1)
*(.sdata)
*(.sdata2)
*(.dynamic)
CONSTRUCTORS
}
_edata = .;
PROVIDE (edata = .);
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(256);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(256);
__init_end = .;
__bss_start = .;
.bss :
{
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss)
*(COMMON)
}
_end = . ;
PROVIDE (end = .);
}

1
board/bubinga405ep/Makefile → board/amcc/bubinga/Makefile
View File

@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
SOBJS = init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)

84
board/amcc/bubinga/bubinga.c Normal file
View File

@ -0,0 +1,84 @@
/*
* (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
long int spd_sdram(void);
#include <common.h>
#include <asm/processor.h>
int board_early_init_f(void)
{
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr(uicer, 0x00000000); /* disable all ints */
mtdcr(uiccr, 0x00000010);
mtdcr(uicpr, 0xFFFF7FF0); /* set int polarities */
mtdcr(uictr, 0x00000010); /* set int trigger levels */
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
return 0;
}
/*
* Check Board Identity:
*/
int checkboard(void)
{
unsigned char *s = getenv("serial#");
puts("Board: Bubinga - AMCC PPC405EP Evaluation Board");
if (s != NULL) {
puts(", serial# ");
puts(s);
}
putc('\n');
return (0);
}
/*
* sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
*/
void sdram_init(void)
{
return;
}
/* -------------------------------------------------------------------------
initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
the necessary info for SDRAM controller configuration
------------------------------------------------------------------------- */
long int initdram(int board_type)
{
long int ret;
ret = spd_sdram();
return ret;
}
int testdram(void)
{
/* TODO: XXX XXX XXX */
printf("test: xxx MB - ok\n");
return (0);
}

7
board/walnut405/config.mk → board/amcc/bubinga/config.mk
View File

@ -21,9 +21,4 @@
# MA 02111-1307 USA
#
#
# esd ADCIOP boards
#
#TEXT_BASE = 0xFFFE0000
TEXT_BASE = 0xFFF80000
TEXT_BASE = 0xFFFC0000

204
board/amcc/bubinga/flash.c Normal file
View File

@ -0,0 +1,204 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Modified 4/5/2001
* Wait for completion of each sector erase command issued
* 4/5/2001
* Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
*/
#include <common.h>
#include <ppc4xx.h>
#include <asm/processor.h>
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
#undef DEBUG
#ifdef DEBUG
#define DEBUGF(x...) printf(x)
#else
#define DEBUGF(x...)
#endif /* DEBUG */
/*
* include common flash code (for amcc boards)
*/
#include "../common/flash.c"
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size(vu_long * addr, flash_info_t * info);
static void flash_get_offsets(ulong base, flash_info_t * info);
unsigned long flash_init(void)
{
unsigned long size_b0, size_b1;
int i;
uint pbcr;
unsigned long base_b0, base_b1;
/* Init: no FLASHes known */
for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here - FIXME XXX */
size_b0 =
flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
size_b0, size_b0 << 20);
}
/* Only one bank */
if (CFG_MAX_FLASH_BANKS == 1) {
/* Setup offsets */
flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
CFG_MONITOR_BASE,
CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
&flash_info[0]);
#ifdef CFG_ENV_IS_IN_FLASH
(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
&flash_info[0]);
(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
&flash_info[0]);
#endif
size_b1 = 0;
flash_info[0].size = size_b0;
}
/* 2 banks */
else {
size_b1 =
flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
&flash_info[1]);
/* Re-do sizing to get full correct info */
if (size_b1) {
mtdcr(ebccfga, pb0cr);
pbcr = mfdcr(ebccfgd);
mtdcr(ebccfga, pb0cr);
base_b1 = -size_b1;
pbcr = (pbcr & 0x0001ffff) | base_b1 |
(((size_b1 / 1024 / 1024) - 1) << 17);
mtdcr(ebccfgd, pbcr);
/* printf("pb1cr = %x\n", pbcr); */
}
if (size_b0) {
mtdcr(ebccfga, pb1cr);
pbcr = mfdcr(ebccfgd);
mtdcr(ebccfga, pb1cr);
base_b0 = base_b1 - size_b0;
pbcr = (pbcr & 0x0001ffff) | base_b0 |
(((size_b0 / 1024 / 1024) - 1) << 17);
mtdcr(ebccfgd, pbcr);
/* printf("pb0cr = %x\n", pbcr); */
}
size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
flash_get_offsets(base_b0, &flash_info[0]);
/* monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
base_b0 + size_b0 - CFG_MONITOR_LEN,
base_b0 + size_b0 - 1, &flash_info[0]);
/* Also protect sector containing initial power-up instruction */
/* (flash_protect() checks address range - other call ignored) */
(void)flash_protect(FLAG_PROTECT_SET,
0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
(void)flash_protect(FLAG_PROTECT_SET,
0xFFFFFFFC, 0xFFFFFFFF, &flash_info[1]);
if (size_b1) {
/* Re-do sizing to get full correct info */
size_b1 =
flash_get_size((vu_long *) base_b1, &flash_info[1]);
flash_get_offsets(base_b1, &flash_info[1]);
/* monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
base_b1 + size_b1 - CFG_MONITOR_LEN,
base_b1 + size_b1 - 1,
&flash_info[1]);
/* monitor protection OFF by default (one is enough) */
(void)flash_protect(FLAG_PROTECT_CLEAR,
base_b0 + size_b0 - CFG_MONITOR_LEN,
base_b0 + size_b0 - 1,
&flash_info[0]);
} else {
flash_info[1].flash_id = FLASH_UNKNOWN;
flash_info[1].sector_count = -1;
}
flash_info[0].size = size_b0;
flash_info[1].size = size_b1;
} /* else 2 banks */
return (size_b0 + size_b1);
}
static void flash_get_offsets(ulong base, flash_info_t * info)
{
int i;
/* set up sector start address table */
if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
(info->flash_id == FLASH_AM040)) {
for (i = 0; i < info->sector_count; i++)
info->start[i] = base + (i * 0x00010000);
} else {
if (info->flash_id & FLASH_BTYPE) {
/* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00004000;
info->start[2] = base + 0x00006000;
info->start[3] = base + 0x00008000;
for (i = 4; i < info->sector_count; i++) {
info->start[i] =
base + (i * 0x00010000) - 0x00030000;
}
} else {
/* set sector offsets for top boot block type */
i = info->sector_count - 1;
info->start[i--] = base + info->size - 0x00004000;
info->start[i--] = base + info->size - 0x00006000;
info->start[i--] = base + info->size - 0x00008000;
for (; i >= 0; i--) {
info->start[i] = base + i * 0x00010000;
}
}
}
}

1
board/bubinga405ep/u-boot.lds → board/amcc/bubinga/u-boot.lds
View File

@ -62,7 +62,6 @@ SECTIONS
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
board/bubinga405ep/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)

320
board/ocotea/flash.c → board/amcc/common/flash.c
View File

@ -35,115 +35,13 @@
#include <ppc4xx.h>
#include <asm/processor.h>
#undef DEBUG
#ifdef DEBUG
#define DEBUGF(x...) printf(x)
#else
#define DEBUGF(x...)
#endif /* DEBUG */
#define BOOT_SMALL_FLASH 0x40 /* 01000000 */
#define FLASH_ONBD_N 2 /* 00000010 */
#define FLASH_SRAM_SEL 1 /* 00000001 */
#define FLASH_ONBD_N 2 /* 00000010 */
#define FLASH_SRAM_SEL 1 /* 00000001 */
#define BOOT_SMALL_FLASH_VAL 4
#define FLASH_ONBD_N_VAL 2
#define FLASH_SRAM_SEL_VAL 1
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
{0xFF800000, 0xFF880000, 0xFFC00000}, /* 0:000: configuraton 4 */
{0xFF900000, 0xFF980000, 0xFFC00000}, /* 1:001: configuraton 3 */
{0x00000000, 0x00000000, 0x00000000}, /* 2:010: configuraton 8 */
{0x00000000, 0x00000000, 0x00000000}, /* 3:011: configuraton 7 */
{0xFFE00000, 0xFFF00000, 0xFF800000}, /* 4:100: configuraton 2 */
{0xFFF00000, 0xFFF80000, 0xFF800000}, /* 5:101: configuraton 1 */
{0x00000000, 0x00000000, 0x00000000}, /* 6:110: configuraton 6 */
{0x00000000, 0x00000000, 0x00000000} /* 7:111: configuraton 5 */
};
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size(vu_long * addr, flash_info_t * info);
static int write_word(flash_info_t * info, ulong dest, ulong data);
#ifdef CONFIG_OCOTEA
#define ADDR0 0x5555
#define ADDR1 0x2aaa
#define FLASH_WORD_SIZE unsigned char
#endif
/*-----------------------------------------------------------------------
*/
unsigned long flash_init(void)
{
unsigned long total_b = 0;
unsigned long size_b[CFG_MAX_FLASH_BANKS];
unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
unsigned char switch_status;
unsigned short index = 0;
int i;
/* read FPGA base register FPGA_REG0 */
switch_status = *fpga_base;
/* check the bitmap of switch status */
if (switch_status & BOOT_SMALL_FLASH) {
index += BOOT_SMALL_FLASH_VAL;
}
if (switch_status & FLASH_ONBD_N) {
index += FLASH_ONBD_N_VAL;
}
if (switch_status & FLASH_SRAM_SEL) {
index += FLASH_SRAM_SEL_VAL;
}
DEBUGF("\n");
DEBUGF("FLASH: Index: %d\n", index);
/* Init: no FLASHes known */
for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
/* check whether the address is 0 */
if (flash_addr_table[index][i] == 0) {
continue;
}
/* call flash_get_size() to initialize sector address */
size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], &flash_info[i]);
flash_info[i].size = size_b[i];
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
i, size_b[i], size_b[i] << 20);
flash_info[i].sector_count = -1;
flash_info[i].size = 0;