OMAP3 pandora: setup pulls for various GPIOs
Set pullups or pulldowns for GPIOs which need them. Disable them for others, which have external pulls. Also make disabled pull setting consistent (some pins had type set to "up" even if pull type selection was disabled).
This commit is contained in:
Grazvydas Ignotas
Jean-Christophe PLAGNIOL-VILLARD
parent
5ff78122f2
commit
8672c28870
|
|
@ -145,26 +145,26 @@ const omap3_sysinfo sysinfo = {
|
|||
MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
|
||||
MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
|
||||
/*GPIO based game buttons*/\
|
||||
MUX_VAL(CP(CAM_XCLKA), (IEN | PTU | DIS | M4)) /*GPIO_96 - LEFT*/\
|
||||
MUX_VAL(CP(CAM_PCLK), (IEN | PTU | DIS | M4)) /*GPIO_97 - L2*/\
|
||||
MUX_VAL(CP(CAM_FLD), (IEN | PTU | DIS | M4)) /*GPIO_98 - RIGHT*/\
|
||||
MUX_VAL(CP(CAM_D0), (IEN | PTU | DIS | M4)) /*GPIO_99 - MENU*/\
|
||||
MUX_VAL(CP(CAM_D1), (IEN | PTU | DIS | M4)) /*GPIO_100 - START*/\
|
||||
MUX_VAL(CP(CAM_D2), (IEN | PTU | DIS | M4)) /*GPIO_101 - Y*/\
|
||||
MUX_VAL(CP(CAM_D3), (IEN | PTU | DIS | M4)) /*GPIO_102 - L1*/\
|
||||
MUX_VAL(CP(CAM_D4), (IEN | PTU | DIS | M4)) /*GPIO_103 - DOWN*/\
|
||||
MUX_VAL(CP(CAM_D5), (IEN | PTU | DIS | M4)) /*GPIO_104 - SELECT*/\
|
||||
MUX_VAL(CP(CAM_D6), (IEN | PTU | DIS | M4)) /*GPIO_105 - R1*/\
|
||||
MUX_VAL(CP(CAM_D7), (IEN | PTU | DIS | M4)) /*GPIO_106 - B*/\
|
||||
MUX_VAL(CP(CAM_D8), (IEN | PTU | DIS | M4)) /*GPIO_107 - R2*/\
|
||||
MUX_VAL(CP(CAM_D10), (IEN | PTU | DIS | M4)) /*GPIO_109 - X*/\
|
||||
MUX_VAL(CP(CAM_D11), (IEN | PTU | DIS | M4)) /*GPIO_110 - UP*/\
|
||||
MUX_VAL(CP(CAM_XCLKB), (IEN | PTU | DIS | M4)) /*GPIO_111 - A*/\
|
||||
MUX_VAL(CP(CAM_XCLKA), (IEN | PTD | DIS | M4)) /*GPIO_96 - LEFT*/\
|
||||
MUX_VAL(CP(CAM_PCLK), (IEN | PTD | DIS | M4)) /*GPIO_97 - L2*/\
|
||||
MUX_VAL(CP(CAM_FLD), (IEN | PTD | DIS | M4)) /*GPIO_98 - RIGHT*/\
|
||||
MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M4)) /*GPIO_99 - MENU*/\
|
||||
MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M4)) /*GPIO_100 - START*/\
|
||||
MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M4)) /*GPIO_101 - Y*/\
|
||||
MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M4)) /*GPIO_102 - L1*/\
|
||||
MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M4)) /*GPIO_103 - DOWN*/\
|
||||
MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M4)) /*GPIO_104 - SELECT*/\
|
||||
MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M4)) /*GPIO_105 - R1*/\
|
||||
MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M4)) /*GPIO_106 - B*/\
|
||||
MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M4)) /*GPIO_107 - R2*/\
|
||||
MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M4)) /*GPIO_109 - X*/\
|
||||
MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M4)) /*GPIO_110 - UP*/\
|
||||
MUX_VAL(CP(CAM_XCLKB), (IEN | PTD | DIS | M4)) /*GPIO_111 - A*/\
|
||||
/*Audio Interface To External DAC (Headphone, Speakers)*/\
|
||||
MUX_VAL(CP(MCBSP2_FSX), (IDIS | PTD | DIS | M0)) /*McBSP2_FSX*/\
|
||||
MUX_VAL(CP(MCBSP2_CLKX), (IDIS | PTD | DIS | M0)) /*McBSP2_CLKX*/\
|
||||
MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
|
||||
MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\
|
||||
MUX_VAL(CP(MCBSP_CLKS), (IEN | PTD | DIS | M0)) /*McBSP_CLKS*/\
|
||||
MUX_VAL(CP(MCBSP2_DR), (IDIS | PTD | DIS | M4)) /*GPIO_118*/\
|
||||
/* - nPOWERDOWN_DAC*/\
|
||||
/*Expansion card 1*/\
|
||||
|
|
@ -210,13 +210,13 @@ const omap3_sysinfo sysinfo = {
|
|||
MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M0)) /*McBSP4_DX*/\
|
||||
MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M0)) /*McBSP4_FSX*/\
|
||||
/*GPIO definitions for muxed pins on AV connector*/\
|
||||
MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M4)) /*GPIO_144,*/\
|
||||
MUX_VAL(CP(UART2_CTS), (IEN | PTD | EN | M4)) /*GPIO_144,*/\
|
||||
/*UART2_CTS*/\
|
||||
MUX_VAL(CP(UART2_RTS), (IEN | PTU | DIS | M4)) /*GPIO_145,*/\
|
||||
MUX_VAL(CP(UART2_RTS), (IEN | PTD | EN | M4)) /*GPIO_145,*/\
|
||||
/*UART2_RTS*/\
|
||||
MUX_VAL(CP(UART2_TX), (IEN | PTU | EN | M4)) /*GPIO_146,*/\
|
||||
MUX_VAL(CP(UART2_TX), (IEN | PTD | EN | M4)) /*GPIO_146,*/\
|
||||
/*UART2_TX*/\
|
||||
MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147,*/\
|
||||
MUX_VAL(CP(UART2_RX), (IEN | PTD | EN | M4)) /*GPIO_147,*/\
|
||||
/*UART2_RX*/\
|
||||
/*Serial Interface (Peripheral boot, Linux console, on AV connector)*/\
|
||||
MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX*/\
|
||||
|
|
@ -231,18 +231,18 @@ const omap3_sysinfo sysinfo = {
|
|||
MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\
|
||||
/* - LED_WIFI*/\
|
||||
/*Switches*/\
|
||||
MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\
|
||||
MUX_VAL(CP(MCSPI1_CS2), (IEN | PTD | DIS | M4)) /*GPIO_176*/\
|
||||
/* - nHOLD_SWITCH*/\
|
||||
MUX_VAL(CP(CAM_D9), (IEN | PTU | DIS | M4)) /*GPIO_108*/\
|
||||
MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M4)) /*GPIO_108*/\
|
||||
/* - nLID_SWITCH*/\
|
||||
/*External IRQs*/\
|
||||
MUX_VAL(CP(CAM_HS), (IEN | PTU | DIS | M4)) /*GPIO_94*/\
|
||||
MUX_VAL(CP(CAM_HS), (IEN | PTD | DIS | M4)) /*GPIO_94*/\
|
||||
/* - nTOUCH_IRQ*/\
|
||||
MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M4)) /*GPIO_21*/\
|
||||
/* - WIFI_IRQ*/\
|
||||
MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M4)) /*GPIO_161*/\
|
||||
/* - nIRQ_NUB1*/\
|
||||
MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTU | DIS | M4)) /*GPIO_162*/\
|
||||
MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_162*/\
|
||||
/* - nIRQ_NUB2*/\
|
||||
/*Various other stuff*/\
|
||||
MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | DIS | M4)) /*GPIO_163*/\
|
||||
|
|
@ -262,7 +262,7 @@ const omap3_sysinfo sysinfo = {
|
|||
/* - nLCD_RESET*/\
|
||||
MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\
|
||||
/* - RESET_NUBS*/\
|
||||
MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)) /*GPIO_164*/\
|
||||
MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M4)) /*GPIO_164*/\
|
||||
/* - EN_USB_5V*/\
|
||||
/*Spare GPIOs*/\
|
||||
MUX_VAL(CP(GPMC_NCS7), (IEN | PTD | EN | M4)) /*GPIO_58*/\
|
||||
|
|
|
|||
Loading…
Reference in New Issue