Merge branch 'denx-coldfire' into coldfire-aug2007

This commit is contained in:
John Rigby 2007-08-16 17:40:03 -06:00
commit 81735b2568
48 changed files with 7592 additions and 233 deletions

View File

@ -488,3 +488,9 @@ N: Michal Simek
E: monstr@monstr.eu
D: Support for Microblaze, ML401, XUPV2P board
W: www.monstr.eu
N: TsiChung Liew
E: Tsi-Chung.Liew@freescale.com
D: Support for ColdFire MCF532x
W: www.freescale.com

View File

@ -621,8 +621,9 @@ LIST_coldfire=" \
M5271EVB \
M5272C3 \
M5282EVB \
TASREG \
M5329EVB \
r5200 \
TASREG \
"
#########################################################################

View File

@ -209,12 +209,14 @@ LIBS += drivers/libdrivers.a
LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/nand/libnand.a
LIBS += drivers/nand_legacy/libnand_legacy.a
LIBS += drivers/net/libnet.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
endif
LIBS += drivers/serial/libserial.a
LIBS += drivers/sk98lin/libsk98lin.a
LIBS += post/libpost.a post/drivers/libpostdrivers.a
LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
@ -1672,6 +1674,18 @@ TASREG_config : unconfig
r5200_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200
M5329AFEE_config \
M5329BFEE_config : unconfig
@case "$@" in \
M5329AFEE_config) NAND=0;; \
M5329BFEE_config) NAND=16;; \
esac; \
>include/config.h ; \
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" >> include/config.h ; \
fi
@$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
#########################################################################
## MPC83xx Systems
#########################################################################

1
README
View File

@ -136,6 +136,7 @@ Directory Hierarchy:
- i386 Files specific to i386 CPUs
- ixp Files specific to Intel XScale IXP CPUs
- mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs
- mcf532x Files specific to Freescale ColdFire MCF5329 CPUs
- mips Files specific to MIPS CPUs
- mpc5xx Files specific to Freescale MPC5xx CPUs
- mpc5xxx Files specific to Freescale MPC5xxx CPUs

View File

@ -0,0 +1,44 @@
#
# (C) Copyright 2000-2003
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o mii.o nand.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

View File

@ -0,0 +1,25 @@
#
# (C) Copyright 2000-2003
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
TEXT_BASE = 0

View File

@ -0,0 +1,88 @@
/*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <asm/immap.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
puts("Board: ");
puts("Freescale FireEngine 5329 EVB\n");
return 0;
};
long int initdram(int board_type)
{
volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
u32 dramsize, i;
dramsize = CFG_SDRAM_SIZE * 0x100000;
for (i = 0x13; i < 0x20; i++) {
if (dramsize == (1 << i))
break;
}
i--;
sdram->cs0 = (CFG_SDRAM_BASE | i);
sdram->cfg1 = CFG_SDRAM_CFG1;
sdram->cfg2 = CFG_SDRAM_CFG2;
/* Issue PALL */
sdram->ctrl = CFG_SDRAM_CTRL | 2;
/* Issue LEMR */
sdram->mode = CFG_SDRAM_EMOD;
sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
udelay(500);
/* Issue PALL */
sdram->ctrl = (CFG_SDRAM_CTRL | 2);
/* Perform two refresh cycles */
sdram->ctrl = CFG_SDRAM_CTRL | 4;
sdram->ctrl = CFG_SDRAM_CTRL | 4;
sdram->mode = CFG_SDRAM_MODE;
sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
udelay(100);
return dramsize;
};
int testdram(void)
{
/* TODO: XXX XXX XXX */
printf("DRAM test not implemented!\n");
return (0);
}

View File

@ -0,0 +1,306 @@
/*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/fec.h>
#include <asm/immap.h>
#include <config.h>
#include <net.h>
DECLARE_GLOBAL_DATA_PTR;
#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
#undef MII_DEBUG
#undef ET_DEBUG
int fecpin_setclear(struct eth_device *dev, int setclear)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
if (setclear) {
gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
gpio->par_feci2c |=
GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
} else {
gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
gpio->par_feci2c &=
~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
}
return 0;
}
#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII)
#include <miiphy.h>
/* Make MII read/write commands for the FEC. */
#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
/* PHY identification */
#define PHY_ID_LXT970 0x78100000 /* LXT970 */
#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
#define PHY_ID_QS6612 0x01814400 /* QS6612 */
#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */
#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */
#define STR_ID_LXT970 "LXT970"
#define STR_ID_LXT971 "LXT971"
#define STR_ID_82555 "Intel82555"
#define STR_ID_QS6612 "QS6612"
#define STR_ID_AMD79C784 "AMD79C784"
#define STR_ID_LSI80225 "LSI80225"
#define STR_ID_LSI80225B "LSI80225/B"
#define STR_ID_DP83848VV "N83848"
#define STR_ID_DP83849 "N83849"
/****************************************************************************
* mii_init -- Initialize the MII for MII command without ethernet
* This function is a subset of eth_init
****************************************************************************
*/
void mii_reset(struct fec_info_s *info)
{
volatile fec_t *fecp = (fec_t *) (info->miibase);
int i;
fecp->ecr = FEC_ECR_RESET;
for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
udelay(1);
}
if (i == FEC_RESET_DELAY) {
printf("FEC_RESET_DELAY timeout\n");
}
}
/* send command to phy using mii, wait for result */
uint mii_send(uint mii_cmd)
{
struct fec_info_s *info;
struct eth_device *dev;
volatile fec_t *ep;
uint mii_reply;
int j = 0;
/* retrieve from register structure */
dev = eth_get_dev();
info = dev->priv;
ep = (fec_t *) info->miibase;
ep->mmfr = mii_cmd; /* command to phy */
/* wait for mii complete */
while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
udelay(1);
j++;
}
if (j >= MCFFEC_TOUT_LOOP) {
printf("MII not complete\n");
return -1;
}
mii_reply = ep->mmfr; /* result from phy */
ep->eir = FEC_EIR_MII; /* clear MII complete */
#ifdef ET_DEBUG
printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
__FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
#endif
return (mii_reply & 0xffff); /* data read from phy */
}
#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)
{
#define MAX_PHY_PASSES 11
struct fec_info_s *info = dev->priv;
int phyaddr, pass;
uint phyno, phytype;
if (info->phyname_init)
return info->phy_addr;
phyaddr = -1; /* didn't find a PHY yet */
for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
if (pass > 1) {
/* PHY may need more time to recover from reset.
* The LXT970 needs 50ms typical, no maximum is
* specified, so wait 10ms before try again.
* With 11 passes this gives it 100ms to wake up.
*/
udelay(10000); /* wait 10ms */
}
for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
#ifdef ET_DEBUG
printf("PHY type 0x%x pass %d type\n", phytype, pass);
#endif
if (phytype != 0xffff) {
phyaddr = phyno;
phytype <<= 16;
phytype |=
mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
switch (phytype & 0xffffffff) {
case PHY_ID_DP83848VV:
strcpy(info->phy_name,
STR_ID_DP83848VV);
info->phyname_init = 1;
break;
default:
strcpy(info->phy_name, "unknown");
info->phyname_init = 1;
break;
}
#ifdef ET_DEBUG
printf("PHY @ 0x%x pass %d type ", phyno, pass);
switch (phytype & 0xffffffff) {
case PHY_ID_DP83848VV:
printf(STR_ID_DP83848VV);
break;
default:
printf("0x%08x\n", phytype);
break;
}
#endif
}
}
}
if (phyaddr < 0)
printf("No PHY device found.\n");
return phyaddr;
}
#endif /* CFG_DISCOVER_PHY */
int mii_init(void) __attribute__((weak,alias("__mii_init")));
void __mii_init(void)
{
volatile fec_t *fecp;
struct fec_info_s *info;
struct eth_device *dev;
int miispd = 0, i = 0;
u16 autoneg = 0;
/* retrieve from register structure */
dev = eth_get_dev();
info = dev->priv;
fecp = (fec_t *) info->miibase;
fecpin_setclear(dev, 1);
mii_reset(info);
/* We use strictly polling mode only */
fecp->eimr = 0;
/* Clear any pending interrupt */
fecp->eir = 0xffffffff;
/* Set MII speed */
miispd = (gd->bus_clk / 1000000) / 5;
fecp->mscr = miispd << 1;
info->phy_addr = mii_discover_phy(dev);
#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
while (i < MCFFEC_TOUT_LOOP) {
autoneg = 0;
miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
i++;
if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
break;
udelay(500);
}
if (i >= MCFFEC_TOUT_LOOP) {
printf("Auto Negotiation not complete\n");
}
/* adapt to the half/full speed settings */
info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
}
/*****************************************************************************
* Read and write a MII PHY register, routines used by MII Utilities
*
* FIXME: These routines are expected to return 0 on success, but mii_send
* does _not_ return an error code. Maybe 0xFFFF means error, i.e.
* no PHY connected...
* For now always return 0.
* FIXME: These routines only work after calling eth_init() at least once!
* Otherwise they hang in mii_send() !!! Sorry!
*****************************************************************************/
int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
unsigned short *value)
{
short rdreg; /* register working value */
#ifdef MII_DEBUG
printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
#endif
rdreg = mii_send(mk_mii_read(addr, reg));
*value = rdreg;
#ifdef MII_DEBUG
printf("0x%04x\n", *value);
#endif
return 0;
}
int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
unsigned short value)
{
short rdreg; /* register working value */
#ifdef MII_DEBUG
printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
#endif
rdreg = mii_send(mk_mii_write(addr, reg, value));
#ifdef MII_DEBUG
printf("0x%04x\n", value);
#endif
return 0;
}
#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */

View File

@ -0,0 +1,114 @@
/*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <asm/io.h>
#include <asm/immap.h>
DECLARE_GLOBAL_DATA_PTR;
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#include <nand.h>
#include <linux/mtd/mtd.h>
#define SET_CLE 0x10
#define CLR_CLE ~SET_CLE
#define SET_ALE 0x08
#define CLR_ALE ~SET_ALE
static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
{
struct nand_chip *this = mtdinfo->priv;
volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
u32 nand_baseaddr = (u32) this->IO_ADDR_W;
switch (cmd) {
case NAND_CTL_SETNCE:
case NAND_CTL_CLRNCE:
break;
case NAND_CTL_SETCLE:
nand_baseaddr |= SET_CLE;
break;
case NAND_CTL_CLRCLE:
nand_baseaddr &= CLR_CLE;
break;
case NAND_CTL_SETALE:
nand_baseaddr |= SET_ALE;
break;
case NAND_CTL_CLRALE:
nand_baseaddr |= CLR_ALE;
break;
case NAND_CTL_SETWP:
fbcs->csmr2 |= CSMR_WP;
break;
case NAND_CTL_CLRWP:
fbcs->csmr2 &= ~CSMR_WP;
break;
}
this->IO_ADDR_W = (void __iomem *)(nand_baseaddr);
}
static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte)
{
struct nand_chip *this = mtdinfo->priv;
*((volatile u8 *)(this->IO_ADDR_W)) = byte;
}
static u8 nand_read_byte(struct mtd_info *mtdinfo)
{
struct nand_chip *this = mtdinfo->priv;
return (u8) (*((volatile u8 *)this->IO_ADDR_R));
}
static int nand_dev_ready(struct mtd_info *mtdinfo)
{
return 1;
}
int board_nand_init(struct nand_chip *nand)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
*((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004;
/* set up pin configuration */
gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
gpio->pddr_timer |= 0x08;
gpio->ppd_timer |= 0x08;
gpio->pclrr_timer = 0;
gpio->podr_timer = 0;
nand->chip_delay = 50;
nand->eccmode = NAND_ECC_SOFT;
nand->hwcontrol = nand_hwcontrol;
nand->read_byte = nand_read_byte;
nand->write_byte = nand_write_byte;
nand->dev_ready = nand_dev_ready;
return 0;
}
#endif

View File

@ -0,0 +1,144 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_ARCH(m68k)
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
.rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
.rela.data : { *(.rela.data) }
.rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
.plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/mcf532x/start.o (.text)
lib_m68k/traps.o (.text)
lib_m68k/interrupts.o (.text)
common/dlmalloc.o (.text)
lib_generic/zlib.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/environment.o (.text)
*(.text)
*(.fixup)
*(.got1)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
*(.rodata)
*(.rodata1)
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
__got_start = .;
*(.got)
__got_end = .;
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
*(.fixup)
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
*(.data)
*(.data1)
*(.sdata)
*(.sdata2)
*(.dynamic)
CONSTRUCTORS
}
_edata = .;
PROVIDE (edata = .);
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(256);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(256);
__init_end = .;
__bss_start = .;
.bss :
{
_sbss = .;
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss)
*(COMMON)
. = ALIGN(4);
_ebss = .;
}
_end = . ;
PROVIDE (end = .);
}

View File

@ -207,6 +207,59 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
#elif defined(CONFIG_M68K) /* M68K */
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int i;
bd_t *bd = gd->bd;
print_num ("memstart", (ulong)bd->bi_memstart);
print_num ("memsize", (ulong)bd->bi_memsize);
print_num ("flashstart", (ulong)bd->bi_flashstart);
print_num ("flashsize", (ulong)bd->bi_flashsize);
print_num ("flashoffset", (ulong)bd->bi_flashoffset);
#if defined(CFG_INIT_RAM_ADDR)
print_num ("sramstart", (ulong)bd->bi_sramstart);
print_num ("sramsize", (ulong)bd->bi_sramsize);
#endif
#if defined(CFG_MBAR)
print_num ("mbar", bd->bi_mbar_base );
#endif
#if defined(CFG_CMD_NET)
puts ("ethaddr =");
for (i=0; i<6; ++i) {
printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
}
#if defined(CONFIG_HAS_ETH1)
puts ("\neth1addr =");
for (i=0; i<6; ++i) {
printf ("%c%02X", i ? ':' : ' ', bd->bi_enet1addr[i]);
}
#endif
#if defined(CONFIG_HAS_ETH2)
puts ("\neth2addr =");
for (i=0; i<6; ++i) {
printf ("%c%02X", i ? ':' : ' ', bd->bi_enet2addr[i]);
}
#endif
#if defined(CONFIG_HAS_ETH3)
puts ("\neth3addr =");
for (i=0; i<6; ++i) {
printf ("%c%02X", i ? ':' : ' ', bd->bi_enet3addr[i]);
}
#endif
puts ("\nip_addr = ");
print_IPaddr (bd->bi_ip_addr);
#endif /* CFG_CMD_NET */
printf ("\nbaudrate = %d bps\n", bd->bi_baudrate);
return 0;
}
#else /* ! PPC, which leaves MIPS */
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])

View File

@ -438,7 +438,7 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
int rcode = 0;
char *devname;
#ifdef CONFIG_8xx
#if defined(CONFIG_8xx) || defined(CONFIG_MCF532x)
mii_init ();
#endif

48
cpu/mcf532x/Makefile Normal file
View File

@ -0,0 +1,48 @@
#
# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
# CFLAGS += -DET_DEBUG
LIB = lib$(CPU).a
START =
COBJS = cpu.o speed.o cpu_init.o interrupts.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
START := $(addprefix $(obj),$(START))
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

27
cpu/mcf532x/config.mk Normal file
View File

@ -0,0 +1,27 @@
#
# (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
#
# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
PLATFORM_CPPFLAGS += -m5307 -fPIC

119
cpu/mcf532x/cpu.c Normal file
View File

@ -0,0 +1,119 @@
/*
*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <command.h>
#include <asm/immap.h>
int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
{
volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
wdp->cr = 0;
udelay(1000);
/* enable watchdog, set timeout to 0 and wait */
wdp->cr = WTM_WCR_EN;
while (1) ;
/* we don't return! */
return 0;
};
int checkcpu(void)
{
DECLARE_GLOBAL_DATA_PTR;
volatile ccm_t *ccm = (ccm_t *) MMAP_CCM;
u16 msk;
u16 id = 0;
u8 ver;
puts("CPU: ");
msk = (ccm->cir >> 6);
ver = (ccm->cir & 0x003f);
switch (msk) {
case 0x54:
id = 5329;
break;
case 0x59:
id = 5328;
break;
case 0x61:
id = 5327;
break;
}
if (id) {
printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
ver);
printf(" CPU CLK %d Mhz BUS CLK %d Mhz\n",
(int)(gd->cpu_clk / 1000000),
(int)(gd->bus_clk / 1000000));
}
return 0;
};
#if defined(CONFIG_WATCHDOG)
/* Called by macro WATCHDOG_RESET */
void watchdog_reset(void)
{
volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
wdp->sr = 0x5555; /* Count register */
}
int watchdog_disable(void)
{
volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
/* UserManual, once the wdog is disabled, wdog cannot be re-enabled */
wdp->cr |= WTM_WCR_HALTED; /* halted watchdog timer */
puts("WATCHDOG:disabled\n");
return (0);
}
int watchdog_init(void)
{
volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
u32 wdog_module = 0;
/* set timeout and enable watchdog */
wdog_module = ((CFG_CLK / 1000) * CONFIG_WATCHDOG_TIMEOUT);
wdog_module |= (wdog_module / 8192);
wdp->mr = wdog_module;
wdp->cr = WTM_WCR_EN;
puts("WATCHDOG:enabled\n");
return (0);
}
#endif /* CONFIG_WATCHDOG */

141
cpu/mcf532x/cpu_init.c Normal file
View File

@ -0,0 +1,141 @@
/*
*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <asm/immap.h>
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
volatile scm2_t *scm2 = (scm2_t *) MMAP_SCM2;
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
volatile wdog_t *wdog = (wdog_t *) MMAP_WDOG;
/* watchdog is enabled by default - disable the watchdog */
#ifndef CONFIG_WATCHDOG
wdog->cr = 0;
#endif
scm1->mpr0 = 0x77777777;
scm2->pacra = 0;
scm2->pacrb = 0;
scm2->pacrc = 0;
scm2->pacrd = 0;
scm2->pacre = 0;
scm2->pacrf = 0;
scm2->pacrg = 0;
scm1->pacrh = 0;
/* Port configuration */
gpio->par_cs = 0;
#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
fbcs->csar0 = CFG_CS0_BASE;
fbcs->cscr0 = CFG_CS0_CTRL;
fbcs->csmr0 = CFG_CS0_MASK;
#endif
#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
/* Latch chipselect */
gpio->par_cs |= GPIO_PAR_CS1;
fbcs->csar1 = CFG_CS1_BASE;
fbcs->cscr1 = CFG_CS1_CTRL;
fbcs->csmr1 = CFG_CS1_MASK;
#endif
#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
gpio->par_cs |= GPIO_PAR_CS2;
fbcs->csar2 = CFG_CS2_BASE;
fbcs->cscr2 = CFG_CS2_CTRL;
fbcs->csmr2 = CFG_CS2_MASK;
#endif
#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
gpio->par_cs |= GPIO_PAR_CS3;
fbcs->csar3 = CFG_CS3_BASE;
fbcs->cscr3 = CFG_CS3_CTRL;
fbcs->csmr3 = CFG_CS3_MASK;
#endif
#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
gpio->par_cs |= GPIO_PAR_CS4;
fbcs->csar4 = CFG_CS4_BASE;
fbcs->cscr4 = CFG_CS4_CTRL;
fbcs->csmr4 = CFG_CS4_MASK;
#endif
#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
gpio->par_cs |= GPIO_PAR_CS5;
fbcs->csar5 = CFG_CS5_BASE;
fbcs->cscr5 = CFG_CS5_CTRL;
fbcs->csmr5 = CFG_CS5_MASK;
#endif
#ifdef CONFIG_FSL_I2C
gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA;
#endif
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(void)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
switch (CFG_UART_PORT) {
case 0:
gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
break;
case 1:
gpio->par_uart =
(GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
break;
case 2:
gpio->par_timer &= 0x0F;
gpio->par_timer |= (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2);
break;
}
}

49
cpu/mcf532x/interrupts.c Normal file
View File

@ -0,0 +1,49 @@
/*
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* CPU specific interrupt routine */
#include <common.h>
#include <asm/immap.h>
int interrupt_init(void)
{
volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
/* Make sure all interrupts are disabled */
intp->imrh0 |= 0xFFFFFFFF;
intp->imrl0 |= 0xFFFFFFFF;
enable_interrupts();
return 0;
}
#if defined(CONFIG_MCFTMR)
void dtimer_intr_setup(void)
{
volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI;
intp->imrh0 &= ~CFG_TMRINTR_MASK;
}
#endif

216
cpu/mcf532x/speed.c Normal file
View File

@ -0,0 +1,216 @@
/*
*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/immap.h>
/* PLL min/max specifications */
#define MAX_FVCO 500000 /* KHz */
#define MAX_FSYS 80000 /* KHz */
#define MIN_FSYS 58333 /* KHz */
#define FREF 16000 /* KHz */
#define MAX_MFD 135 /* Multiplier */
#define MIN_MFD 88 /* Multiplier */
#define BUSDIV 6 /* Divider */
/*
* Low Power Divider specifications
*/
#define MIN_LPD (1 << 0) /* Divider (not encoded) */
#define MAX_LPD (1 << 15) /* Divider (not encoded) */
#define DEFAULT_LPD (1 << 1) /* Divider (not encoded) */
/*
* Get the value of the current system clock
*
* Parameters:
* none
*
* Return Value:
* The current output system frequency
*/
int get_sys_clock(void)
{
volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM);
volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL);
int divider;
/* Test to see if device is in LIMP mode */
if (ccm->misccr & CCM_MISCCR_LIMP) {
divider = ccm->cdr & CCM_CDR_LPDIV(0xF);
return (FREF / (2 << divider));
} else {
return ((FREF * pll->pfdr) / (BUSDIV * 4));
}
}
/*
* Initialize the Low Power Divider circuit
*
* Parameters:
* div Desired system frequency divider
*
* Return Value:
* The resulting output system frequency
*/
int clock_limp(int div)
{
volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM);
u32 temp;
/* Check bounds of divider */
if (div < MIN_LPD)
div = MIN_LPD;
if (div > MAX_LPD)
div = MAX_LPD;
/* Save of the current value of the SSIDIV so we don't overwrite the value */
temp = (ccm->cdr & CCM_CDR_SSIDIV(0xF));
/* Apply the divider to the system clock */
ccm->cdr = (CCM_CDR_LPDIV(div) | CCM_CDR_SSIDIV(temp));
ccm->misccr |= CCM_MISCCR_LIMP;
return (FREF / (3 * (1 << div)));
}
/*
* Exit low power LIMP mode
*
* Parameters:
* div Desired system frequency divider
*
* Return Value:
* The resulting output system frequency
*/
int clock_exit_limp(void)
{
volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM);
int fout;
/* Exit LIMP mode */
ccm->misccr &= (~CCM_MISCCR_LIMP);
/* Wait for PLL to lock */
while (!(ccm->misccr & CCM_MISCCR_PLL_LOCK)) ;
fout = get_sys_clock();
return fout;
}
/* Initialize the PLL
*
* Parameters:
* fref PLL reference clock frequency in KHz
* fsys Desired PLL output frequency in KHz
* flags Operating parameters
*
* Return Value:
* The resulting output system frequency
*/
int clock_pll(int fsys, int flags)
{
volatile u32 *sdram_workaround = (volatile u32 *)(MMAP_SDRAM + 0x80);
volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL);
int fref, temp, fout, mfd;
u32 i;
fref = FREF;
if (fsys == 0) {
/* Return current PLL output */
mfd = pll->pfdr;
return (fref * mfd / (BUSDIV * 4));
}
/* Check bounds of requested system clock */
if (fsys > MAX_FSYS)
fsys = MAX_FSYS;
if (fsys < MIN_FSYS)
fsys = MIN_FSYS;
/* Multiplying by 100 when calculating the temp value,
and then dividing by 100 to calculate the mfd allows
for exact values without needing to include floating
point libraries. */
temp = (100 * fsys) / fref;
mfd = (4 * BUSDIV * temp) / 100;
/* Determine the output frequency for selected values */
fout = ((fref * mfd) / (BUSDIV * 4));
/*
* Check to see if the SDRAM has already been initialized.
* If it has then the SDRAM needs to be put into self refresh
* mode before reprogramming the PLL.
*/
/*
* Initialize the PLL to generate the new system clock frequency.
* The device must be put into LIMP mode to reprogram the PLL.
*/
/* Enter LIMP mode */
clock_limp(DEFAULT_LPD);
/* Reprogram PLL for desired fsys */
pll->podr = (PLL_PODR_CPUDIV(BUSDIV / 3) | PLL_PODR_BUSDIV(BUSDIV));
pll->pfdr = mfd;
/* Exit LIMP mode */
clock_exit_limp();
/*
* Return the SDRAM to normal operation if it is in use.
*/
/* software workaround for SDRAM opeartion after exiting LIMP mode errata */
*sdram_workaround = CFG_SDRAM_BASE;
/* wait for DQS logic to relock */
for (i = 0; i < 0x200; i++) ;
return fout;
}
/*
* get_clocks() fills in gd->cpu_clock and gd->bus_clk
*/
int get_clocks(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bus_clk = clock_pll(CFG_CLK / 1000, 0) * 1000;
gd->cpu_clk = (gd->bus_clk * 3);
return (0);
}

335
cpu/mcf532x/start.S Normal file
View File

@ -0,0 +1,335 @@
/*
* Copyright (C) 2003 Josef Baumgartner <josef.baumgartner@telex.de>
* Based on code from Bernhard Kuhn <bkuhn@metrowerks.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include "version.h"
#ifndef CONFIG_IDENT_STRING
#define CONFIG_IDENT_STRING ""
#endif
#define _START _start
#define _FAULT _fault
#define SAVE_ALL \
move.w #0x2700,%sr; /* disable intrs */ \
subl #60,%sp; /* space for 15 regs */ \
moveml %d0-%d7/%a0-%a6,%sp@;
#define RESTORE_ALL \
moveml %sp@,%d0-%d7/%a0-%a6; \
addl #60,%sp; /* space for 15 regs */ \
rte;
.text
/*
* Vector table. This is used for initial platform startup.
* These vectors are to catch any un-intended traps.
*/
_vectors:
INITSP: .long 0x00000000 /* Initial SP */
INITPC: .long _START /* Initial PC */
vector02: .long _FAULT /* Access Error */
vector03: .long _FAULT /* Address Error */
vector04: .long _FAULT /* Illegal Instruction */
vector05: .long _FAULT /* Reserved */
vector06: .long _FAULT /* Reserved */
vector07: .long _FAULT /* Reserved */
vector08: .long _FAULT /* Privilege Violation */
vector09: .long _FAULT /* Trace */
vector0A: .long _FAULT /* Unimplemented A-Line */
vector0B: .long _FAULT /* Unimplemented F-Line */
vector0C: .long _FAULT /* Debug Interrupt */
vector0D: .long _FAULT /* Reserved */
vector0E: .long _FAULT /* Format Error */
vector0F: .long _FAULT /* Unitialized Int. */
/* Reserved */
vector10_17:
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
vector18: .long _FAULT /* Spurious Interrupt */
vector19: .long _FAULT /* Autovector Level 1 */
vector1A: .long _FAULT /* Autovector Level 2 */
vector1B: .long _FAULT /* Autovector Level 3 */
vector1C: .long _FAULT /* Autovector Level 4 */
vector1D: .long _FAULT /* Autovector Level 5 */
vector1E: .long _FAULT /* Autovector Level 6 */
vector1F: .long _FAULT /* Autovector Level 7 */
/* TRAP #0 - #15 */
vector20_2F:
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
/* Reserved */
vector30_3F:
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
vector64_127:
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
vector128_191:
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
vector192_255:
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.text
.globl _start
_start:
nop
nop
move.w #0x2700,%sr /* Mask off Interrupt */
/* Set vector base register at the beginning of the Flash */
move.l #CFG_FLASH_BASE, %d0
movec %d0, %VBR
move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
movec %d0, %RAMBAR0
/* invalidate and disable cache */
move.l #0x01000000, %d0 /* Invalidate cache cmd */
movec %d0, %CACR /* Invalidate cache */
move.l #0, %d0
movec %d0, %ACR0
movec %d0, %ACR1
/* initialize general use internal ram */
move.l #0, %d0
move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a2
move.l %d0, (%a1)
move.l %d0, (%a2)
/* set stackpointer to end of internal ram to get some stackspace for the
first c-code */
move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
clr.l %sp@-
move.l #__got_start, %a5 /* put relocation table address to a5 */
bsr cpu_init_f /* run low-level CPU init code (from flash) */
bsr board_init_f /* run low-level board init code (from flash) */
/* board_init_f() does not return */
/*------------------------------------------------------------------------------*/
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
* This "function" does not return, instead it continues in RAM
* after relocating the monitor code.
*
* r3 = dest
* r4 = src
* r5 = length in bytes
* r6 = cachelinesize
*/
.globl relocate_code
relocate_code:
link.w %a6,#0
move.l 8(%a6), %sp /* set new stack pointer */
move.l 12(%a6), %d0 /* Save copy of Global Data pointer */
move.l 16(%a6), %a0 /* Save copy of Destination Address */
move.l #CFG_MONITOR_BASE, %a1
move.l #__init_end, %a2
move.l %a0, %a3
/* copy the code to RAM */
1:
move.l (%a1)+, (%a3)+
cmp.l %a1,%a2
bgt.s 1b
/*
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
move.l %a0, %a1
add.l #(in_ram - CFG_MONITOR_BASE), %a1
jmp (%a1)
in_ram:
clear_bss:
/*
* Now clear BSS segment
*/
move.l %a0, %a1
add.l #(_sbss - CFG_MONITOR_BASE),%a1
move.l %a0, %d1
add.l #(_ebss - CFG_MONITOR_BASE),%d1
6:
clr.l (%a1)+
cmp.l %a1,%d1
bgt.s 6b
/*
* fix got table in RAM
*/
move.l %a0, %a1
add.l #(__got_start - CFG_MONITOR_BASE),%a1
move.l %a1,%a5 /* * fix got pointer register a5 */
move.l %a0, %a2
add.l #(__got_end - CFG_MONITOR_BASE),%a2
7:
move.l (%a1),%d1
sub.l #_start,%d1
add.l %a0,%d1
move.l %d1,(%a1)+
cmp.l %a2, %a1
bne 7b
/* calculate relative jump to board_init_r in ram */
move.l %a0, %a1
add.l #(board_init_r - CFG_MONITOR_BASE), %a1
/* set parameters for board_init_r */
move.l %a0,-(%sp) /* dest_addr */
move.l %d0,-(%sp) /* gd */
jsr (%a1)
/*------------------------------------------------------------------------------*/
/* exception code */
.globl _fault
_fault:
jmp _fault
.globl _exc_handler
_exc_handler:
SAVE_ALL
movel %sp,%sp@-
bsr exc_handler
addql #4,%sp
RESTORE_ALL
.globl _int_handler
_int_handler:
SAVE_ALL
movel %sp,%sp@-
bsr int_handler
addql #4,%sp
RESTORE_ALL
/*------------------------------------------------------------------------------*/
/* cache functions */
.globl icache_enable
icache_enable:
move.l #0x01000000, %d0 /* Invalidate cache cmd */
movec %d0, %CACR /* Invalidate cache */
move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */
movec %d0, %ACR0 /* Enable cache */
move.l #0x80000200, %d0 /* Setup cache mask */
movec %d0, %CACR /* Enable cache */
nop
move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
moveq #1, %d0
move.l %d0, (%a1)
rts
.globl icache_disable
icache_disable:
move.l #0x01000000, %d0 /* Setup cache mask */
movec %d0, %CACR /* Disable cache */
clr.l %d0 /* Setup cache mask */
movec %d0, %ACR0
movec %d0, %ACR1
move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
moveq #0, %d0
move.l %d0, (%a1)
rts
.globl icache_status
icache_status:
move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
move.l (%a1), %d0
rts
.globl icache_invalid
icache_invalid:
move.l #0x81000200, %d0 /* Setup cache mask */
movec %d0, %CACR /* Enable cache */
rts
.globl dcache_enable
dcache_enable:
move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1
moveq #1, %d0
move.l %d0, (%a1)
rts
/* No dcache, just a dummy function */
.globl dcache_disable
dcache_disable:
move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1
moveq #0, %d0
move.l %d0, (%a1)
rts
.globl dcache_status
dcache_status:
move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1
move.l (%a1), %d0
rts
/*------------------------------------------------------------------------------*/
.globl version_string
version_string:
.ascii U_BOOT_VERSION
.ascii " (", __DATE__, " - ", __TIME__, ")"
.ascii CONFIG_IDENT_STRING, "\0"

45
drivers/net/Makefile Normal file
View File

@ -0,0 +1,45 @@
#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB := $(obj)libnet.a
COBJS := mcffec.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

584
drivers/net/mcffec.c Normal file
View File

@ -0,0 +1,584 @@
/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <malloc.h>
#include <asm/fec.h>
#include <asm/immap.h>
#include <command.h>
#include <config.h>
#include <net.h>
#include <miiphy.h>
#ifdef CONFIG_MCFFEC
#undef ET_DEBUG
#undef MII_DEBUG
/* Ethernet Transmit and Receive Buffers */
#define DBUF_LENGTH 1520
#define TX_BUF_CNT 2
#define PKT_MAXBUF_SIZE 1518
#define PKT_MINBUF_SIZE 64
#define PKT_MAXBLR_SIZE 1520
#define LAST_PKTBUFSRX PKTBUFSRX - 1
#define BD_ENET_RX_W_E (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY)
#define BD_ENET_TX_RDY_LST (BD_ENET_TX_READY | BD_ENET_TX_LAST)
DECLARE_GLOBAL_DATA_PTR;
#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
struct fec_info_s fec_info[] = {
#ifdef CFG_FEC0_IOBASE
{
0, /* index */
CFG_FEC0_IOBASE, /* io base */
CFG_FEC0_PINMUX, /* gpio pin muxing */
CFG_FEC0_MIIBASE, /* mii base */
-1, /* phy_addr */
0, /* duplex and speed */
0, /* phy name */
0, /* phyname init */
0, /* RX BD */
0, /* TX BD */
0, /* rx Index */
0, /* tx Index */
0, /* tx buffer */
0, /* initialized flag */
},
#endif
#ifdef CFG_FEC1_IOBASE
{
1, /* index */
CFG_FEC1_IOBASE, /* io base */
CFG_FEC1_PINMUX, /* gpio pin muxing */
CFG_FEC1_MIIBASE, /* mii base */
-1, /* phy_addr */
0, /* duplex and speed */
0, /* phy name */
0, /* phy name init */
0, /* RX BD */
0, /* TX BD */
0, /* rx Index */
0, /* tx Index */
0, /* tx buffer */
0, /* initialized flag */
}
#endif
};
int fec_send(struct eth_device *dev, volatile void *packet, int length);
int fec_recv(struct eth_device *dev);
int fec_init(struct eth_device *dev, bd_t * bd);
void fec_halt(struct eth_device *dev);
void fec_reset(struct eth_device *dev);
extern int fecpin_setclear(struct eth_device *dev, int setclear);
#ifdef CFG_DISCOVER_PHY
extern void __mii_init(void);
extern uint mii_send(uint mii_cmd);
extern int mii_discover_phy(struct eth_device *dev);
extern int mcffec_miiphy_read(char *devname, unsigned char addr,
unsigned char reg, unsigned short *value);
extern int mcffec_miiphy_write(char *devname, unsigned char addr,
unsigned char reg, unsigned short value);
#endif
void setFecDuplexSpeed(volatile fec_t * fecp, bd_t * bd, int dup_spd)
{
if ((dup_spd >> 16) == FULL) {
/* Set maximum frame length */
fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE |
FEC_RCR_PROM | 0x100;
fecp->tcr = FEC_TCR_FDEN;
} else {
/* Half duplex mode */
fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) |
FEC_RCR_MII_MODE | FEC_RCR_DRT;
fecp->tcr &= ~FEC_TCR_FDEN;
}
if ((dup_spd & 0xFFFF) == _100BASET) {
#ifdef MII_DEBUG
printf("100Mbps\n");
#endif
bd->bi_ethspeed = 100;
} else {
#ifdef MII_DEBUG
printf("10Mbps\n");
#endif
bd->bi_ethspeed = 10;
}
}
int fec_send(struct eth_device *dev, volatile void *packet, int length)
{
struct fec_info_s *info = dev->priv;
volatile fec_t *fecp = (fec_t *) (info->iobase);
int j, rc;
u16 phyStatus;
miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &phyStatus);
/* section 16.9.23.3
* Wait for ready
*/
j = 0;
while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) &&
(j < MCFFEC_TOUT_LOOP)) {
udelay(1);
j++;
}
if (j >= MCFFEC_TOUT_LOOP) {
printf("TX not ready\n");
}
info->txbd[info->txIdx].cbd_bufaddr = (uint) packet;
info->txbd[info->txIdx].cbd_datlen = length;
info->txbd[info->txIdx].cbd_sc |= BD_ENET_TX_RDY_LST;
/* Activate transmit Buffer Descriptor polling */
fecp->tdar = 0x01000000; /* Descriptor polling active */
#ifdef CFG_UNIFY_CACHE
icache_invalid();
#endif
j = 0;
while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) &&
(j < MCFFEC_TOUT_LOOP)) {
udelay(1);
j++;
}
if (j >= MCFFEC_TOUT_LOOP) {
printf("TX timeout\n");
}
#ifdef ET_DEBUG
printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
__FILE__, __LINE__, __FUNCTION__, j,
info->txbd[info->txIdx].cbd_sc,
(info->txbd[info->txIdx].cbd_sc & 0x003C) >> 2);
#endif
/* return only status bits */
rc = (info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS);
info->txIdx = (info->txIdx + 1) % TX_BUF_CNT;
return rc;
}
int fec_recv(struct eth_device *dev)
{
struct fec_info_s *info = dev->priv;
volatile fec_t *fecp = (fec_t *) (info->iobase);
int length;
for (;;) {
#ifdef CFG_UNIFY_CACHE
icache_invalid();
#endif
/* section 16.9.23.2 */
if (info->rxbd[info->rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
length = -1;
break; /* nothing received - leave for() loop */
}
length = info->rxbd[info->rxIdx].cbd_datlen;
if (info->rxbd[info->rxIdx].cbd_sc & 0x003f) {
printf("%s[%d] err: %x\n",
__FUNCTION__, __LINE__,
info->rxbd[info->rxIdx].cbd_sc);
#ifdef ET_DEBUG
printf("%s[%d] err: %x\n",
__FUNCTION__, __LINE__,
info->rxbd[info->rxIdx].cbd_sc);
#endif
} else {
length -= 4;
/* Pass the packet up to the protocol layers. */
NetReceive(NetRxPackets[info->rxIdx], length);
fecp->eir |= FEC_EIR_RXF;
}
/* Give the buffer back to the FEC. */
info->rxbd[info->rxIdx].cbd_datlen = 0;
/* wrap around buffer index when necessary */
if (info->rxIdx == LAST_PKTBUFSRX) {
info->rxbd[PKTBUFSRX - 1].cbd_sc = BD_ENET_RX_W_E;
info->rxIdx = 0;
} else {
info->rxbd[info->rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
info->rxIdx++;
}
/* Try to fill Buffer Descriptors */
fecp->rdar = 0x01000000; /* Descriptor polling active */
}
return length;
}
#ifdef ET_DEBUG
void dbgFecRegs(struct eth_device *dev)
{
struct fec_info_s *info = dev->priv;
volatile fec_t *fecp = (fec_t *) (info->iobase);
printf("=====\n");
printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir);
printf("imask %x - %x\n", (int)&fecp->eimr, fecp->eimr);
printf("r_des_active %x - %x\n", (int)&fecp->rdar, fecp->rdar);
printf("x_des_active %x - %x\n", (int)&fecp->tdar, fecp->tdar);
printf("ecntrl %x - %x\n", (int)&fecp->ecr, fecp->ecr);
printf("mii_mframe %x - %x\n", (int)&fecp->mmfr, fecp->mmfr);
printf("mii_speed %x - %x\n", (int)&fecp->mscr, fecp->mscr);
printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc);
printf("r_cntrl %x - %x\n", (int)&fecp->rcr, fecp->rcr);
printf("x_cntrl %x - %x\n", (int)&fecp->tcr, fecp->tcr);
printf("padr_l %x - %x\n", (int)&fecp->palr, fecp->palr);
printf("padr_u %x - %x\n", (int)&fecp->paur, fecp->paur);
printf("op_pause %x - %x\n", (int)&fecp->opd, fecp->opd);
printf("iadr_u %x - %x\n", (int)&fecp->iaur, fecp->iaur);
printf("iadr_l %x - %x\n", (int)&fecp->ialr, fecp->ialr);
printf("gadr_u %x - %x\n", (int)&fecp->gaur, fecp->gaur);
printf("gadr_l %x - %x\n", (int)&fecp->galr, fecp->galr);
printf("x_wmrk %x - %x\n", (int)&fecp->tfwr, fecp->tfwr);
printf("r_bound %x - %x\n", (int)&fecp->frbr, fecp->frbr);
printf("r_fstart %x - %x\n", (int)&fecp->frsr, fecp->frsr);
printf("r_drng %x - %x\n", (int)&fecp->erdsr, fecp->erdsr);
printf("x_drng %x - %x\n", (int)&fecp->etdsr, fecp->etdsr);
printf("r_bufsz %x - %x\n", (int)&fecp->emrbr, fecp->emrbr);
printf("\n");
printf("rmon_t_drop %x - %x\n", (int)&fecp->rmon_t_drop,
fecp->rmon_t_drop);
printf("rmon_t_packets %x - %x\n", (int)&fecp->rmon_t_packets,
fecp->rmon_t_packets);
printf("rmon_t_bc_pkt %x - %x\n", (int)&fecp->rmon_t_bc_pkt,
fecp->rmon_t_bc_pkt);
printf("rmon_t_mc_pkt %x - %x\n", (int)&fecp->rmon_t_mc_pkt,
fecp->rmon_t_mc_pkt);
printf("rmon_t_crc_align %x - %x\n", (int)&fecp->rmon_t_crc_align,
fecp->rmon_t_crc_align);
printf("rmon_t_undersize %x - %x\n", (int)&fecp->rmon_t_undersize,
fecp->rmon_t_undersize);
printf("rmon_t_oversize %x - %x\n", (int)&fecp->rmon_t_oversize,
fecp->rmon_t_oversize);
printf("rmon_t_frag %x - %x\n", (int)&fecp->rmon_t_frag,
fecp->rmon_t_frag);
printf("rmon_t_jab %x - %x\n", (int)&fecp->rmon_t_jab,
fecp->rmon_t_jab);
printf("rmon_t_col %x - %x\n", (int)&fecp->rmon_t_col,
fecp->rmon_t_col);
printf("rmon_t_p64 %x - %x\n", (int)&fecp->rmon_t_p64,
fecp->rmon_t_p64);
printf("rmon_t_p65to127 %x - %x\n", (int)&fecp->rmon_t_p65to127,
fecp->rmon_t_p65to127);
printf("rmon_t_p128to255 %x - %x\n", (int)&fecp->rmon_t_p128to255,
fecp->rmon_t_p128to255);
printf("rmon_t_p256to511 %x - %x\n", (int)&fecp->rmon_t_p256to511,
fecp->rmon_t_p256to511);
printf("rmon_t_p512to1023 %x - %x\n", (int)&fecp->rmon_t_p512to1023,
fecp->rmon_t_p512to1023);
printf("rmon_t_p1024to2047 %x - %x\n", (int)&fecp->rmon_t_p1024to2047,
fecp->rmon_t_p1024to2047);
printf("rmon_t_p_gte2048 %x - %x\n", (int)&fecp->rmon_t_p_gte2048,
fecp->rmon_t_p_gte2048);
printf("rmon_t_octets %x - %x\n", (int)&fecp->rmon_t_octets,
fecp->rmon_t_octets);
printf("\n");
printf("ieee_t_drop %x - %x\n", (int)&fecp->ieee_t_drop,
fecp->ieee_t_drop);
printf("ieee_t_frame_ok %x - %x\n", (int)&fecp->ieee_t_frame_ok,
fecp->ieee_t_frame_ok);
printf("ieee_t_1col %x - %x\n", (int)&fecp->ieee_t_1col,
fecp->ieee_t_1col);
printf("ieee_t_mcol %x - %x\n", (int)&fecp->ieee_t_mcol,
fecp->ieee_t_mcol);
printf("ieee_t_def %x - %x\n", (int)&fecp->ieee_t_def,
fecp->ieee_t_def);
printf("ieee_t_lcol %x - %x\n", (int)&fecp->ieee_t_lcol,
fecp->ieee_t_lcol);
printf("ieee_t_excol %x - %x\n", (int)&fecp->ieee_t_excol,
fecp->ieee_t_excol);
printf("ieee_t_macerr %x - %x\n", (int)&fecp->ieee_t_macerr,
fecp->ieee_t_macerr);
printf("ieee_t_cserr %x - %x\n", (int)&fecp->ieee_t_cserr,
fecp->ieee_t_cserr);
printf("ieee_t_sqe %x - %x\n", (int)&fecp->ieee_t_sqe,
fecp->ieee_t_sqe);
printf("ieee_t_fdxfc %x - %x\n", (int)&fecp->ieee_t_fdxfc,
fecp->ieee_t_fdxfc);
printf("ieee_t_octets_ok %x - %x\n", (int)&fecp->ieee_t_octets_ok,
fecp->ieee_t_octets_ok);
printf("\n");
printf("rmon_r_drop %x - %x\n", (int)&fecp->rmon_r_drop,
fecp->rmon_r_drop);
printf("rmon_r_packets %x - %x\n", (int)&fecp->rmon_r_packets,
fecp->rmon_r_packets);
printf("rmon_r_bc_pkt %x - %x\n", (int)&fecp->rmon_r_bc_pkt,
fecp->rmon_r_bc_pkt);
printf("rmon_r_mc_pkt %x - %x\n", (int)&fecp->rmon_r_mc_pkt,
fecp->rmon_r_mc_pkt);
printf("rmon_r_crc_align %x - %x\n", (int)&fecp->rmon_r_crc_align,
fecp->rmon_r_crc_align);
printf("rmon_r_undersize %x - %x\n", (int)&fecp->rmon_r_undersize,
fecp->rmon_r_undersize);
printf("rmon_r_oversize %x - %x\n", (int)&fecp->rmon_r_oversize,
fecp->rmon_r_oversize);
printf("rmon_r_frag %x - %x\n", (int)&fecp->rmon_r_frag,
fecp->rmon_r_frag);
printf("rmon_r_jab %x - %x\n", (int)&fecp->rmon_r_jab,
fecp->rmon_r_jab);
printf("rmon_r_p64 %x - %x\n", (int)&fecp->rmon_r_p64,
fecp->rmon_r_p64);
printf("rmon_r_p65to127 %x - %x\n", (int)&fecp->rmon_r_p65to127,
fecp->rmon_r_p65to127);
printf("rmon_r_p128to255 %x - %x\n", (int)&fecp->rmon_r_p128to255,
fecp->rmon_r_p128to255);
printf("rmon_r_p256to511 %x - %x\n", (int)&fecp->rmon_r_p256to511,
fecp->rmon_r_p256to511);
printf("rmon_r_p512to1023 %x - %x\n", (int)&fecp->rmon_r_p512to1023,
fecp->rmon_r_p512to1023);
printf("rmon_r_p1024to2047 %x - %x\n", (int)&fecp->rmon_r_p1024to2047,
fecp->rmon_r_p1024to2047);
printf("rmon_r_p_gte2048 %x - %x\n", (int)&fecp->rmon_r_p_gte2048,
fecp->rmon_r_p_gte2048);
printf("rmon_r_octets %x - %x\n", (int)&fecp->rmon_r_octets,
fecp->rmon_r_octets);
printf("\n");
printf("ieee_r_drop %x - %x\n", (int)&fecp->ieee_r_drop,
fecp->ieee_r_drop);
printf("ieee_r_frame_ok %x - %x\n", (int)&fecp->ieee_r_frame_ok,
fecp->ieee_r_frame_ok);
printf("ieee_r_crc %x - %x\n", (int)&fecp->ieee_r_crc,
fecp->ieee_r_crc);
printf("ieee_r_align %x - %x\n", (int)&fecp->ieee_r_align,
fecp->ieee_r_align);
printf("ieee_r_macerr %x - %x\n", (int)&fecp->ieee_r_macerr,
fecp->ieee_r_macerr);
printf("ieee_r_fdxfc %x - %x\n", (int)&fecp->ieee_r_fdxfc,
fecp->ieee_r_fdxfc);
printf("ieee_r_octets_ok %x - %x\n", (int)&fecp->ieee_r_octets_ok,
fecp->ieee_r_octets_ok);
printf("\n\n\n");
}
#endif
int fec_init(struct eth_device *dev, bd_t * bd)
{
struct fec_info_s *info = dev->priv;
volatile fec_t *fecp = (fec_t *) (info->iobase);
int i;
u8 *ea = NULL;
fecpin_setclear(dev, 1);
fec_reset(dev);
#if (CONFIG_COMMANDS & CFG_CMD_MII) || defined (CONFIG_MII) || \
defined (CFG_DISCOVER_PHY)
mii_init();
setFecDuplexSpeed(fecp, bd, info->dup_spd);
#else
#ifndef CFG_DISCOVER_PHY
setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
#endif /* ifndef CFG_DISCOVER_PHY */
#endif /* CFG_CMD_MII || CONFIG_MII */
/* We use strictly polling mode only */
fecp->eimr = 0;
/* Clear any pending interrupt */
fecp->eir = 0xffffffff;
/* Set station address */
if ((u32) fecp == CFG_FEC0_IOBASE) {
ea = &bd->bi_enetaddr[0];
} else {
#ifdef CFG_FEC1_IOBASE
ea = &bd->bi_enet1addr[0];
#endif
}
fecp->palr = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
fecp->paur = (ea[4] << 24) | (ea[5] << 16);
#ifdef ET_DEBUG
printf("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n",
ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]);
#endif
/* Clear unicast address hash table */
fecp->iaur = 0;
fecp->ialr = 0;
/* Clear multicast address hash table */
fecp->gaur = 0;
fecp->galr = 0;
/* Set maximum receive buffer size. */
fecp->emrbr = PKT_MAXBLR_SIZE;
/*
* Setup Buffers and Buffer Desriptors
*/
info->rxIdx = 0;
info->txIdx = 0;
/*
* Setup Receiver Buffer Descriptors (13.14.24.18)
* Settings:
* Empty, Wrap
*/
for (i = 0; i < PKTBUFSRX; i++) {
info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
info->rxbd[i].cbd_datlen = 0; /* Reset */
info->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
}
info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
/*
* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
* Settings:
* Last, Tx CRC
*/
for (i = 0; i < TX_BUF_CNT; i++) {
info->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
info->txbd[i].cbd_datlen = 0; /* Reset */
info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]);
}
info->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
/* Set receive and transmit descriptor base */
fecp->erdsr = (unsigned int)(&info->rxbd[0]);
fecp->etdsr = (unsigned int)(&info->txbd[0]);
/* Now enable the transmit and receive processing */
fecp->ecr |= FEC_ECR_ETHER_EN;
/* And last, try to fill Rx Buffer Descriptors */
fecp->rdar = 0x01000000; /* Descriptor polling active */
return 1;
}
void fec_reset(struct eth_device *dev)
{
struct fec_info_s *info = dev->priv;
volatile fec_t *fecp = (fec_t *) (info->iobase);
int i;
fecp->ecr = FEC_ECR_RESET;
for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
udelay(1);
}
if (i == FEC_RESET_DELAY) {
printf("FEC_RESET_DELAY timeout\n");
}
}
void fec_halt(struct eth_device *dev)
{
struct fec_info_s *info = dev->priv;
fec_reset(dev);
fecpin_setclear(dev, 0);
info->rxIdx = info->txIdx = 0;
memset(info->rxbd, 0, PKTBUFSRX * sizeof(cbd_t));
memset(info->txbd, 0, TX_BUF_CNT * sizeof(cbd_t));
memset(info->txbuf, 0, DBUF_LENGTH);
}
int mcffec_initialize(bd_t * bis)
{
struct eth_device *dev;
int i;
for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) {
dev =
(struct eth_device *)memalign(CFG_CACHELINE_SIZE,
sizeof *dev);
if (dev == NULL)
hang();
memset(dev, 0, sizeof(*dev));
sprintf(dev->name, "FEC%d", fec_info[i].index);
dev->priv = &fec_info[i];
dev->init = fec_init;
dev->halt = fec_halt;
dev->send = fec_send;
dev->recv = fec_recv;
/* setup Receive and Transmit buffer descriptor */
fec_info[i].rxbd =
(cbd_t *) memalign(CFG_CACHELINE_SIZE,
(PKTBUFSRX * sizeof(cbd_t)));
fec_info[i].txbd =
(cbd_t *) memalign(CFG_CACHELINE_SIZE,
(TX_BUF_CNT * sizeof(cbd_t)));
fec_info[i].txbuf =
(char *)memalign(CFG_CACHELINE_SIZE, DBUF_LENGTH);
#ifdef ET_DEBUG
printf("rxbd %x txbd %x\n",
(int)fec_info[i].rxbd, (int)fec_info[i].txbd);
#endif
fec_info[i].phy_name = (char *)memalign(CFG_CACHELINE_SIZE, 32);
eth_register(dev);
#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
miiphy_register(dev->name,
mcffec_miiphy_read, mcffec_miiphy_write);
#endif
}
/* default speed */
bis->bi_ethspeed = 10;
return 1;
}
#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */
#endif /* CONFIG_MCFFEC */

45
drivers/serial/Makefile Normal file
View File

@ -0,0 +1,45 @@
#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB := $(obj)libserial.a
COBJS := mcfuart.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

131
drivers/serial/mcfuart.c Normal file
View File

@ -0,0 +1,131 @@
/*
* (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew, Tsi-Chung.Liew@freescale.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* Minimal serial functions needed to use one of the uart ports
* as serial console interface.
*/
#include <common.h>
#include <asm/immap.h>
#include <asm/uart.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_MCFUART
extern void uart_port_conf(void);
int serial_init(void)
{
volatile uart_t *uart;
u32 counter;
uart = (volatile uart_t *)(CFG_UART_BASE);
uart_port_conf();
/* write to SICR: SIM2 = uart mode,dcd does not affect rx */
uart->ucr = UART_UCR_RESET_RX;
uart->ucr = UART_UCR_RESET_TX;
uart->ucr = UART_UCR_RESET_ERROR;
uart->ucr = UART_UCR_RESET_MR;
__asm__("nop");
uart->uimr = 0;
/* write to CSR: RX/TX baud rate from timers */
uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK);
uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE);
uart->umr = UART_UMR_SB_STOP_BITS_1;
/* Setting up BaudRate */
counter = (u32) (gd->bus_clk / (gd->baudrate));
counter >>= 5;
/* write to CTUR: divide counter upper byte */
uart->ubg1 = (u8) ((counter & 0xff00) >> 8);
/* write to CTLR: divide counter lower byte */
uart->ubg2 = (u8) (counter & 0x00ff);
uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED);
return (0);
}
void serial_putc(const char c)
{
volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
if (c == '\n')
serial_putc('\r');
/* Wait for last character to go. */
while (!(uart->usr & UART_USR_TXRDY)) ;
uart->utb = c;
}
void serial_puts(const char *s)
{
while (*s) {
serial_putc(*s++);
}
}
int serial_getc(void)
{
volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
/* Wait for a character to arrive. */
while (!(uart->usr & UART_USR_RXRDY)) ;
return uart->urb;
}
int serial_tstc(void)
{
volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
return (uart->usr & UART_USR_RXRDY);
}
void serial_setbrg(void)
{
volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
u32 counter;
counter = ((gd->bus_clk / gd->baudrate)) >> 5;
counter++;
/* write to CTUR: divide counter upper byte */
uart->ubg1 = ((counter & 0xff00) >> 8);
/* write to CTLR: divide counter lower byte */
uart->ubg2 = (counter & 0x00ff);
uart->ucr = UART_UCR_RESET_RX;
uart->ucr = UART_UCR_RESET_TX;
uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED;
}
#endif /* CONFIG_MCFUART */

View File

@ -15,4 +15,43 @@ extern int test_and_set_bit(int nr, volatile void *addr);
extern int test_and_clear_bit(int nr, volatile void *addr);
extern int test_and_change_bit(int nr, volatile void *addr);
#ifdef __KERNEL__
/*
* ffs: find first bit set. This is defined the same way as
* the libc and compiler builtin ffs routines, therefore
* differs in spirit from the above ffz (man ffs).
*/
extern __inline__ int ffs(int x)
{
int r = 1;
if (!x)
return 0;
if (!(x & 0xffff)) {
x >>= 16;
r += 16;
}
if (!(x & 0xff)) {
x >>= 8;
r += 8;
}
if (!(x & 0xf)) {
x >>= 4;
r += 4;
}
if (!(x & 3)) {
x >>= 2;
r += 2;
}
if (!(x & 1)) {
x >>= 1;
r += 1;
}
return r;
}
#define __ffs(x) (ffs(x) - 1)
#endif /* __KERNEL__ */
#endif /* _M68K_BITOPS_H */

View File

@ -1,7 +1,107 @@
/*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _M68K_BYTEORDER_H
#define _M68K_BYTEORDER_H
#include <asm/types.h>
#ifdef __GNUC__
#define __sw16(x) \
((__u16)( \
(((__u16)(x) & (__u16)0x00ffU) << 8) | \
(((__u16)(x) & (__u16)0xff00U) >> 8) ))
#define __sw32(x) \
((__u32)( \
(((__u32)(x)) << 24) | \
(((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \
(((__u32)(x) & (__u32)0x00ff0000UL) >> 8) | \
(((__u32)(x)) >> 24) ))
extern __inline__ unsigned ld_le16(const volatile unsigned short *addr)
{
unsigned result = *addr;
return __sw16(result);
}
extern __inline__ void st_le16(volatile unsigned short *addr,
const unsigned val)
{
*addr = __sw16(val);
}
extern __inline__ unsigned ld_le32(const volatile unsigned *addr)
{
unsigned result = *addr;
return __sw32(result);
}
extern __inline__ void st_le32(volatile unsigned *addr, const unsigned val)
{
*addr = __sw32(val);
}
#if 0
/* alas, egcs sounds like it has a bug in this code that doesn't use the
inline asm correctly, and can cause file corruption. Until I hear that
it's fixed, I can live without the extra speed. I hope. */
#if !(__GNUC__ >= 2 && __GNUC_MINOR__ >= 90)
#if 0
# define __arch_swab16(x) ld_le16(&x)
# define __arch_swab32(x) ld_le32(&x)
#else
static __inline__ __attribute__ ((const))
__u16 ___arch__swab16(__u16 value)
{
return __sw16(value);
}
static __inline__ __attribute__ ((const))
__u32 ___arch__swab32(__u32 value)
{
return __sw32(value);
}
#define __arch__swab32(x) ___arch__swab32(x)
#define __arch__swab16(x) ___arch__swab16(x)
#endif /* 0 */
#endif
/* The same, but returns converted value from the location pointer by addr. */
#define __arch__swab16p(addr) ld_le16(addr)
#define __arch__swab32p(addr) ld_le32(addr)
/* The same, but do the conversion in situ, ie. put the value back to addr. */
#define __arch__swab16s(addr) st_le16(addr,*addr)
#define __arch__swab32s(addr) st_le32(addr,*addr)
#endif
#endif /* __GNUC__ */
#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
#define __BYTEORDER_HAS_U64__
#endif
#include <linux/byteorder/big_endian.h>
#endif /* _M68K_BYTEORDER_H */
#endif /* _M68K_BYTEORDER_H */

138
include/asm-m68k/errno.h Normal file
View File

@ -0,0 +1,138 @@
#ifndef _PPC_ERRNO_H
#define _PPC_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK 58 /* File locking deadlock error */
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
/* Should never be seen by user programs */
#define ERESTARTSYS 512
#define ERESTARTNOINTR 513
#define ERESTARTNOHAND 514 /* restart if no handler.. */
#define ENOIOCTLCMD 515 /* No ioctl command */
#define _LAST_ERRNO 515
#endif

View File

@ -5,6 +5,10 @@
* MPC8xx Communication Processor Module.
* Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
*
* Add FEC Structure and definitions
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
@ -30,9 +34,9 @@
/* Buffer descriptors used FEC.
*/
typedef struct cpm_buf_desc {
ushort cbd_sc; /* Status and Control */
ushort cbd_datlen; /* Data length in buffer */
uint cbd_bufaddr; /* Buffer address in host memory */
ushort cbd_sc; /* Status and Control */
ushort cbd_datlen; /* Data length in buffer */
uint cbd_bufaddr; /* Buffer address in host memory */
} cbd_t;
#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
@ -53,28 +57,36 @@ typedef struct cpm_buf_desc {
/* Buffer descriptor control/status used by Ethernet receive.
*/
#define BD_ENET_RX_EMPTY ((ushort)0x8000)
#define BD_ENET_RX_RO1 ((ushort)0x4000)
#define BD_ENET_RX_WRAP ((ushort)0x2000)
#define BD_ENET_RX_INTR ((ushort)0x1000)
#define BD_ENET_RX_RO2 BD_ENET_RX_INTR
#define BD_ENET_RX_LAST ((ushort)0x0800)
#define BD_ENET_RX_FIRST ((ushort)0x0400)
#define BD_ENET_RX_MISS ((ushort)0x0100)
#define BD_ENET_RX_BC ((ushort)0x0080)
#define BD_ENET_RX_MC ((ushort)0x0040)
#define BD_ENET_RX_LG ((ushort)0x0020)
#define BD_ENET_RX_NO ((ushort)0x0010)
#define BD_ENET_RX_SH ((ushort)0x0008)
#define BD_ENET_RX_CR ((ushort)0x0004)
#define BD_ENET_RX_OV ((ushort)0x0002)
#define BD_ENET_RX_CL ((ushort)0x0001)
#define BD_ENET_RX_TR BD_ENET_RX_CL
#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
/* Buffer descriptor control/status used by Ethernet transmit.
*/
#define BD_ENET_TX_READY ((ushort)0x8000)
#define BD_ENET_TX_PAD ((ushort)0x4000)
#define BD_ENET_TX_TO1 BD_ENET_TX_PAD
#define BD_ENET_TX_WRAP ((ushort)0x2000)
#define BD_ENET_TX_INTR ((ushort)0x1000)
#define BD_ENET_TX_TO2 BD_ENET_TX_INTR_
#define BD_ENET_TX_LAST ((ushort)0x0800)
#define BD_ENET_TX_TC ((ushort)0x0400)
#define BD_ENET_TX_DEF ((ushort)0x0200)
#define BD_ENET_TX_ABC BD_ENET_TX_DEF
#define BD_ENET_TX_HB ((ushort)0x0100)
#define BD_ENET_TX_LC ((ushort)0x0080)
#define BD_ENET_TX_RL ((ushort)0x0040)
@ -83,4 +95,225 @@ typedef struct cpm_buf_desc {
#define BD_ENET_TX_CSL ((ushort)0x0001)
#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
#endif /* fec_h */
#ifdef CONFIG_MCFFEC
/*********************************************************************
*
* Fast Ethernet Controller (FEC)
*
*********************************************************************/
/* FEC private information */
struct fec_info_s {
int index;
u32 iobase;
u32 pinmux;
u32 miibase;
int phy_addr;
int dup_spd;
char *phy_name;
int phyname_init;
cbd_t *rxbd; /* Rx BD */
cbd_t *txbd; /* Tx BD */
uint rxIdx;
uint txIdx;
char *txbuf;
int initialized;
};
/* Register read/write struct */
typedef struct fec {
u8 resv0[0x4];
u32 eir;
u32 eimr;
u8 resv1[0x4];
u32 rdar;
u32 tdar;
u8 resv2[0xC];
u32 ecr;
u8 resv3[0x18];
u32 mmfr;
u32 mscr;
u8 resv4[0x1C];
u32 mibc;
u8 resv5[0x1C];
u32 rcr;
u8 resv6[0x3C];
u32 tcr;
u8 resv7[0x1C];
u32 palr;
u32 paur;
u32 opd;
u8 resv8[0x28];
u32 iaur;
u32 ialr;
u32 gaur;
u32 galr;
u8 resv9[0x1C];
u32 tfwr;
u8 resv10[0x4];
u32 frbr;
u32 frsr;
u8 resv11[0x2C];
u32 erdsr;
u32 etdsr;
u32 emrbr;
u8 resv12[0x74];
u32 rmon_t_drop;
u32 rmon_t_packets;
u32 rmon_t_bc_pkt;
u32 rmon_t_mc_pkt;
u32 rmon_t_crc_align;
u32 rmon_t_undersize;
u32 rmon_t_oversize;
u32 rmon_t_frag;
u32 rmon_t_jab;
u32 rmon_t_col;
u32 rmon_t_p64;
u32 rmon_t_p65to127;
u32 rmon_t_p128to255;
u32 rmon_t_p256to511;
u32 rmon_t_p512to1023;
u32 rmon_t_p1024to2047;
u32 rmon_t_p_gte2048;
u32 rmon_t_octets;
u32 ieee_t_drop;
u32 ieee_t_frame_ok;
u32 ieee_t_1col;
u32 ieee_t_mcol;
u32 ieee_t_def;
u32 ieee_t_lcol;
u32 ieee_t_excol;
u32 ieee_t_macerr;
u32 ieee_t_cserr;
u32 ieee_t_sqe;
u32 ieee_t_fdxfc;
u32 ieee_t_octets_ok;
u8 resv13[0x8];
u32 rmon_r_drop;
u32 rmon_r_packets;
u32 rmon_r_bc_pkt;
u32 rmon_r_mc_pkt;
u32 rmon_r_crc_align;
u32 rmon_r_undersize;
u32 rmon_r_oversize;
u32 rmon_r_frag;
u32 rmon_r_jab;
u32 rmon_r_resvd_0;
u32 rmon_r_p64;
u32 rmon_r_p65to127;
u32 rmon_r_p128to255;
u32 rmon_r_p256to511;
u32 rmon_r_p512to1023;
u32 rmon_r_p1024to2047;
u32 rmon_r_p_gte2048;
u32 rmon_r_octets;
u32 ieee_r_drop;
u32 ieee_r_frame_ok;
u32 ieee_r_crc;
u32 ieee_r_align;
u32 ieee_r_macerr;
u32 ieee_r_fdxfc;
u32 ieee_r_octets_ok;
} fec_t;
/*********************************************************************
* Fast Ethernet Controller (FEC)
*********************************************************************/
/* Bit definitions and macros for FEC_EIR */
#define FEC_EIR_CLEAR_ALL (0xFFF80000)
#define FEC_EIR_HBERR (0x80000000)
#define FEC_EIR_BABR (0x40000000)
#define FEC_EIR_BABT (0x20000000)
#define FEC_EIR_GRA (0x10000000)
#define FEC_EIR_TXF (0x08000000)
#define FEC_EIR_TXB (0x04000000)
#define FEC_EIR_RXF (0x02000000)
#define FEC_EIR_RXB (0x01000000)
#define FEC_EIR_MII (0x00800000)
#define FEC_EIR_EBERR (0x00400000)
#define FEC_EIR_LC (0x00200000)
#define FEC_EIR_RL (0x00100000)
#define FEC_EIR_UN (0x00080000)
/* Bit definitions and macros for FEC_RDAR */
#define FEC_RDAR_R_DES_ACTIVE (0x01000000)
/* Bit definitions and macros for FEC_TDAR */
#define FEC_TDAR_X_DES_ACTIVE (0x01000000)
/* Bit definitions and macros for FEC_ECR */
#define FEC_ECR_ETHER_EN (0x00000002)
#define FEC_ECR_RESET (0x00000001)
/* Bit definitions and macros for FEC_MMFR */
#define FEC_MMFR_DATA(x) (((x)&0xFFFF))
#define FEC_MMFR_ST(x) (((x)&0x03)<<30)
#define FEC_MMFR_ST_01 (0x40000000)
#define FEC_MMFR_OP_RD (0x20000000)
#define FEC_MMFR_OP_WR (0x10000000)
#define FEC_MMFR_PA(x) (((x)&0x1F)<<23)
#define FEC_MMFR_RA(x) (((x)&0x1F)<<18)
#define FEC_MMFR_TA(x) (((x)&0x03)<<16)
#define FEC_MMFR_TA_10 (0x00020000)
/* Bit definitions and macros for FEC_MSCR */
#define FEC_MSCR_DIS_PREAMBLE (0x00000080)
#define FEC_MSCR_MII_SPEED(x) (((x)&0x3F)<<1)
/* Bit definitions and macros for FEC_MIBC */
#define FEC_MIBC_MIB_DISABLE (0x80000000)
#define FEC_MIBC_MIB_IDLE (0x40000000)
/* Bit definitions and macros for FEC_RCR */
#define FEC_RCR_MAX_FL(x) (((x)&0x7FF)<<16)
#define FEC_RCR_FCE (0x00000020)
#define FEC_RCR_BC_REJ (0x00000010)
#define FEC_RCR_PROM (0x00000008)
#define FEC_RCR_MII_MODE (0x00000004)
#define FEC_RCR_DRT (0x00000002)
#define FEC_RCR_LOOP (0x00000001)
/* Bit definitions and macros for FEC_TCR */
#define FEC_TCR_RFC_PAUSE (0x00000010)
#define FEC_TCR_TFC_PAUSE (0x00000008)
#define FEC_TCR_FDEN (0x00000004)
#define FEC_TCR_HBC (0x00000002)
#define FEC_TCR_GTS (0x00000001)
/* Bit definitions and macros for FEC_PAUR */
#define FEC_PAUR_PADDR2(x) (((x)&0xFFFF)<<16)
#define FEC_PAUR_TYPE(x) ((x)&0xFFFF)
/* Bit definitions and macros for FEC_OPD */
#define FEC_OPD_PAUSE_DUR(x) (((x)&0x0000FFFF)<<0)
#define FEC_OPD_OPCODE(x) (((x)&0x0000FFFF)<<16)
/* Bit definitions and macros for FEC_TFWR */
#define FEC_TFWR_X_WMRK(x) ((x)&0x03)
#define FEC_TFWR_X_WMRK_64 (0x01)
#define FEC_TFWR_X_WMRK_128 (0x02)
#define FEC_TFWR_X_WMRK_192 (0x03)
/* Bit definitions and macros for FEC_FRBR */
#define FEC_FRBR_R_BOUND(x) (((x)&0xFF)<<2)
/* Bit definitions and macros for FEC_FRSR */
#define FEC_FRSR_R_FSTART(x) (((x)&0xFF)<<2)
/* Bit definitions and macros for FEC_ERDSR */
#define FEC_ERDSR_R_DES_START(x)(((x)&0x3FFFFFFF)<<2)
/* Bit definitions and macros for FEC_ETDSR */
#define FEC_ETDSR_X_DES_START(x)(((x)&0x3FFFFFFF)<<2)
/* Bit definitions and macros for FEC_EMRBR */
#define FEC_EMRBR_R_BUF_SIZE(x) (((x)&0x7F)<<4)
#define FEC_RESET_DELAY 100
#define FEC_RX_TOUT 100
#endif /* CONFIG_MCFFEC */
#endif /* fec_h */

View File

@ -0,0 +1,86 @@
/*
* Freescale I2C Controller
*
* Copyright 2006 Freescale Semiconductor, Inc.
*
* Based on earlier versions by Gleb Natapov <gnatapov@mrv.com>,
* Xianghua Xiao <x.xiao@motorola.com>, Eran Liberty (liberty@freescale.com),
* and Jeff Brown.
* Some bits are taken from linux driver writen by adrian@humboldt.co.uk.
*
* This software may be used and distributed according to the
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _ASM_FSL_I2C_H_
#define _ASM_FSL_I2C_H_
#include <asm/types.h>
typedef struct fsl_i2c {
u8 adr; /* I2C slave address */
u8 res0[3];
#define I2C_ADR 0xFE
#define I2C_ADR_SHIFT 1
#define I2C_ADR_RES ~(I2C_ADR)
u8 fdr; /* I2C frequency divider register */
u8 res1[3];
#define IC2_FDR 0x3F
#define IC2_FDR_SHIFT 0
#define IC2_FDR_RES ~(IC2_FDR)
u8 cr; /* I2C control redister */
u8 res2[3];
#define I2C_CR_MEN 0x80
#define I2C_CR_MIEN 0x40
#define I2C_CR_MSTA 0x20
#define I2C_CR_MTX 0x10
#define I2C_CR_TXAK 0x08
#define I2C_CR_RSTA 0x04
#define I2C_CR_BCST 0x01
u8 sr; /* I2C status register */
u8 res3[3];
#define I2C_SR_MCF 0x80
#define I2C_SR_MAAS 0x40
#define I2C_SR_MBB 0x20
#define I2C_SR_MAL 0x10
#define I2C_SR_BCSTM 0x08
#define I2C_SR_SRW 0x04
#define I2C_SR_MIF 0x02
#define I2C_SR_RXAK 0x01
u8 dr; /* I2C data register */
u8 res4[3];
#define I2C_DR 0xFF
#define I2C_DR_SHIFT 0
#define I2C_DR_RES ~(I2C_DR)
u8 dfsrr; /* I2C digital filter sampling rate register */
u8 res5[3];
#define I2C_DFSRR 0x3F
#define I2C_DFSRR_SHIFT 0
#define I2C_DFSRR_RES ~(I2C_DR)
/* Fill out the reserved block */
u8 res6[0xE8];
} fsl_i2c_t;
#endif /* _ASM_I2C_H_ */

57
include/asm-m68k/immap.h Normal file
View File

@ -0,0 +1,57 @@
/*
* ColdFire Internal Memory Map and Defines
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __IMMAP_H
#define __IMMAP_H
#ifdef CONFIG_M5329
#include <asm/immap_5329.h>
#include <asm/m5329.h>
#define CFG_FEC0_IOBASE (MMAP_FEC)
#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x4000))
#define CFG_MCFRTC_BASE (MMAP_RTC)
/* Timer */
#ifdef CONFIG_MCFTMR
#define CFG_UDELAY_BASE (MMAP_DTMR0)
#define CFG_TMR_BASE (MMAP_DTMR1)
#define CFG_TMRINTR_NO (INT0_HI_DTMR1)
#define CFG_TMRINTR_MASK (INTC_IPRH_INT33)
#define CFG_TMRINTR_PRI (6)
#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8)
#endif
#ifdef CONFIG_MCFPIT
#define CFG_UDELAY_BASE (MMAP_PIT0)
#define CFG_PIT_BASE (MMAP_PIT1)
#define CFG_PIT_PRESCALE (6)
#endif
#define CFG_INTR_BASE (MMAP_INTC0)
#define CFG_NUM_IRQS (128)
#endif /* CONFIG_M5329 */
#endif /* __IMMAP_H */

View File

@ -0,0 +1,793 @@
/*
* MCF5329 Internal Memory Map
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __IMMAP_5329__
#define __IMMAP_5329__
#define MMAP_SCM1 0xEC000000
#define MMAP_MDHA 0xEC080000
#define MMAP_SKHA 0xEC084000
#define MMAP_RNG 0xEC088000
#define MMAP_SCM2 0xFC000000
#define MMAP_XBS 0xFC004000
#define MMAP_FBCS 0xFC008000
#define MMAP_CAN 0xFC020000
#define MMAP_FEC 0xFC030000
#define MMAP_SCM3 0xFC040000
#define MMAP_EDMA 0xFC044000
#define MMAP_TCD 0xFC045000
#define MMAP_INTC0 0xFC048000
#define MMAP_INTC1 0xFC04C000
#define MMAP_INTCACK 0xFC054000
#define MMAP_I2C 0xFC058000
#define MMAP_QSPI 0xFC05C000
#define MMAP_UART0 0xFC060000
#define MMAP_UART1 0xFC064000
#define MMAP_UART2 0xFC068000
#define MMAP_DTMR0 0xFC070000
#define MMAP_DTMR1 0xFC074000
#define MMAP_DTMR2 0xFC078000
#define MMAP_DTMR3 0xFC07C000
#define MMAP_PIT0 0xFC080000
#define MMAP_PIT1 0xFC084000
#define MMAP_PIT2 0xFC088000
#define MMAP_PIT3 0xFC08C000
#define MMAP_PWM 0xFC090000
#define MMAP_EPORT 0xFC094000
#define MMAP_WDOG 0xFC098000
#define MMAP_CCM 0xFC0A0000
#define MMAP_GPIO 0xFC0A4000
#define MMAP_RTC 0xFC0A8000
#define MMAP_LCDC 0xFC0AC000
#define MMAP_USBOTG 0xFC0B0000
#define MMAP_USBH 0xFC0B4000
#define MMAP_SDRAM 0xFC0B8000
#define MMAP_SSI 0xFC0BC000
#define MMAP_PLL 0xFC0C0000
/* System control module registers */
typedef struct scm1_ctrl {
u32 mpr0; /* 0x00 Master Privilege Register 0 */
u32 res1[15]; /* 0x04 - 0x3F */
u32 pacrh; /* 0x40 Peripheral Access Control Register H */
u32 res2[3]; /* 0x44 - 0x53 */
u32 bmt0; /*0x54 Bus Monitor Timeout 0 */
} scm1_t;
/* Message Digest Hardware Accelerator */
typedef struct mdha_ctrl {
u32 mdmr; /* 0x00 MDHA Mode Register */
u32 mdcr; /* 0x04 Control register */
u32 mdcmr; /* 0x08 Command Register */
u32 mdsr; /* 0x0C Status Register */
u32 mdisr; /* 0x10 Interrupt Status Register */
u32 mdimr; /* 0x14 Interrupt Mask Register */
u32 mddsr; /* 0x1C Data Size Register */
u32 mdin; /* 0x20 Input FIFO */
u32 res1[3]; /* 0x24 - 0x2F */
u32 mdao; /* 0x30 Message Digest AO Register */
u32 mdbo; /* 0x34 Message Digest BO Register */
u32 mdco; /* 0x38 Message Digest CO Register */
u32 mddo; /* 0x3C Message Digest DO Register */
u32 mdeo; /* 0x40 Message Digest EO Register */
u32 mdmds; /* 0x44 Message Data Size Register */
u32 res[10]; /* 0x48 - 0x6F */
u32 mda1; /* 0x70 Message Digest A1 Register */
u32 mdb1; /* 0x74 Message Digest B1 Register */
u32 mdc1; /* 0x78 Message Digest C1 Register */
u32 mdd1; /* 0x7C Message Digest D1 Register */
u32 mde1; /* 0x80 Message Digest E1 Register */
} mdha_t;
/* Symmetric Key Hardware Accelerator */
typedef struct skha_ctrl {
u32 mr; /* 0x00 Mode Register */
u32 cr; /* 0x04 Control Register */
u32 cmr; /* 0x08 Command Register */
u32 sr; /* 0x0C Status Register */
u32 esr; /* 0x10 Error Status Register */
u32 emr; /* 0x14 Error Status Mask Register) */
u32 ksr; /* 0x18 Key Size Register */
u32 dsr; /* 0x1C Data Size Register */
u32 in; /* 0x20 Input FIFO */
u32 out; /* 0x24 Output FIFO */
u32 res1[2]; /* 0x28 - 0x2F */
u32 kdr1; /* 0x30 Key Data Register 1 */
u32 kdr2; /* 0x34 Key Data Register 2 */
u32 kdr3; /* 0x38 Key Data Register 3 */
u32 kdr4; /* 0x3C Key Data Register 4 */
u32 kdr5; /* 0x40 Key Data Register 5 */
u32 kdr6; /* 0x44 Key Data Register 6 */
u32 res2[10]; /* 0x48 - 0x6F */
u32 c1; /* 0x70 Context 1 */
u32 c2; /* 0x74 Context 2 */
u32 c3; /* 0x78 Context 3 */
u32 c4; /* 0x7C Context 4 */
u32 c5; /* 0x80 Context 5 */
u32 c6; /* 0x84 Context 6 */
u32 c7; /* 0x88 Context 7 */
u32 c8; /* 0x8C Context 8 */
u32 c9; /* 0x90 Context 9 */
u32 c10; /* 0x94 Context 10 */
u32 c11; /* 0x98 Context 11 */
} skha_t;
/* Random Number Generator */
typedef struct rng_ctrl {
u32 rngcr; /* 0x00 RNG Control Register */
u32 rngsr; /* 0x04 RNG Status Register */
u32 rnger; /* 0x08 RNG Entropy Register */
u32 rngout; /* 0x0C RNG Output FIFO */
} rng_t;
/* System control module registers 2 */
typedef struct scm2_ctrl {
u32 mpr1; /* 0x00 Master Privilege Register */
u32 res1[7]; /* 0x04 - 0x1F */
u32 pacra; /* 0x20 Peripheral Access Control Register A */
u32 pacrb; /* 0x24 Peripheral Access Control Register B */
u32 pacrc; /* 0x28 Peripheral Access Control Register C */
u32 pacrd; /* 0x2C Peripheral Access Control Register D */
u32 res2[4]; /* 0x30 - 0x3F */
u32 pacre; /* 0x40 Peripheral Access Control Register E */
u32 pacrf; /* 0x44 Peripheral Access Control Register F */
u32 pacrg; /* 0x48 Peripheral Access Control Register G */
u32 res3[2]; /* 0x4C - 0x53 */
u32 bmt1; /* 0x54 Bus Monitor Timeout 1 */
} scm2_t;
/* Cross-Bar Switch Module */
typedef struct xbs_ctrl {
u32 prs1; /* 0x100 Priority Register Slave 1 */
u32 res1[3]; /* 0x104 - 0F */
u32 crs1; /* 0x110 Control Register Slave 1 */
u32 res2[187]; /* 0x114 - 0x3FF */
u32 prs4; /* 0x400 Priority Register Slave 4 */
u32 res3[3]; /* 0x404 - 0F */
u32 crs4; /* 0x410 Control Register Slave 4 */
u32 res4[123]; /* 0x414 - 0x5FF */
u32 prs6; /* 0x600 Priority Register Slave 6 */
u32 res5[3]; /* 0x604 - 0F */
u32 crs6; /* 0x610 Control Register Slave 6 */
u32 res6[59]; /* 0x614 - 0x6FF */
u32 prs7; /* 0x700 Priority Register Slave 7 */
u32 res7[3]; /* 0x704 - 0F */
u32 crs7; /* 0x710 Control Register Slave 7 */
} xbs_t;
/* Flexbus module Chip select registers */
typedef struct fbcs_ctrl {
u16 csar0; /* 0x00 Chip-Select Address Register 0 */
u16 res0;
u32 csmr0; /* 0x04 Chip-Select Mask Register 0 */
u32 cscr0; /* 0x08 Chip-Select Control Register 0 */
u16 csar1; /* 0x0C Chip-Select Address Register 1 */
u16 res1;
u32 csmr1; /* 0x10 Chip-Select Mask Register 1 */
u32 cscr1; /* 0x14 Chip-Select Control Register 1 */
u16 csar2; /* 0x18 Chip-Select Address Register 2 */
u16 res2;
u32 csmr2; /* 0x1C Chip-Select Mask Register 2 */
u32 cscr2; /* 0x20 Chip-Select Control Register 2 */
u16 csar3; /* 0x24 Chip-Select Address Register 3 */
u16 res3;
u32 csmr3; /* 0x28 Chip-Select Mask Register 3 */
u32 cscr3; /* 0x2C Chip-Select Control Register 3 */
u16 csar4; /* 0x30 Chip-Select Address Register 4 */
u16 res4;
u32 csmr4; /* 0x34 Chip-Select Mask Register 4 */
u32 cscr4; /* 0x38 Chip-Select Control Register 4 */
u16 csar5; /* 0x3C Chip-Select Address Register 5 */
u16 res5;
u32 csmr5; /* 0x40 Chip-Select Mask Register 5 */
u32 cscr5; /* 0x44 Chip-Select Control Register 5 */
} fbcs_t;
/* FlexCan module registers */
typedef struct can_ctrl {
u32 mcr; /* 0x00 Module Configuration register */
u32 ctrl; /* 0x04 Control register */
u32 timer; /* 0x08 Free Running Timer */
u32 res1; /* 0x0C */
u32 rxgmask; /* 0x10 Rx Global Mask */
u32 rx14mask; /* 0x14 RxBuffer 14 Mask */
u32 rx15mask; /* 0x18 RxBuffer 15 Mask */
u32 errcnt; /* 0x1C Error Counter Register */
u32 errstat; /* 0x20 Error and status Register */
u32 res2; /* 0x24 */
u32 imask; /* 0x28 Interrupt Mask Register */
u32 res3; /* 0x2C */
u32 iflag; /* 0x30 Interrupt Flag Register */
u32 res4[19]; /* 0x34 - 0x7F */
u32 MB0_15[2048]; /* 0x80 Message Buffer 0-15 */
} can_t;
/* System Control Module register 3 */
typedef struct scm3_ctrl {
u8 res1[19]; /* 0x00 - 0x12 */
u8 wcr; /* 0x13 wakeup control register */
u16 res2; /* 0x14 - 0x15 */
u16 cwcr; /* 0x16 Core Watchdog Control Register */
u8 res3[3]; /* 0x18 - 0x1A */
u8 cwsr; /* 0x1B Core Watchdog Service Register */
u8 res4[2]; /* 0x1C - 0x1D */
u8 scmisr; /* 0x1F Interrupt Status Register */
u32 res5; /* 0x20 */
u32 bcr; /* 0x24 Burst Configuration Register */
u32 res6[18]; /* 0x28 - 0x6F */
u32 cfadr; /* 0x70 Core Fault Address Register */
u8 res7[4]; /* 0x71 - 0x74 */
u8 cfier; /* 0x75 Core Fault Interrupt Enable Register */
u8 cfloc; /* 0x76 Core Fault Location Register */
u8 cfatr; /* 0x77 Core Fault Attributes Register */
u32 res8; /* 0x78 */
u32 cfdtr; /* 0x7C Core Fault Data Register */
} scm3_t;
/* eDMA module registers */
typedef struct edma_ctrl {
u32 cr; /* 0x00 Control Register */
u32 es; /* 0x04 Error Status Register */
u16 res1[3]; /* 0x08 - 0x0D */
u16 erq; /* 0x0E Enable Request Register */
u16 res2[3]; /* 0x10 - 0x15 */
u16 eei; /* 0x16 Enable Error Interrupt Request */
u8 serq; /* 0x18 Set Enable Request */
u8 cerq; /* 0x19 Clear Enable Request */
u8 seei; /* 0x1A Set Enable Error Interrupt Request */
u8 ceei; /* 0x1B Clear Enable Error Interrupt Request */
u8 cint; /* 0x1C Clear Interrupt Enable Register */
u8 cerr; /* 0x1D Clear Error Register */
u8 ssrt; /* 0x1E Set START Bit Register */
u8 cdne; /* 0x1F Clear DONE Status Bit Register */
u16 res3[3]; /* 0x20 - 0x25 */
u16 intr; /* 0x26 Interrupt Request Register */
u16 res4[3]; /* 0x28 - 0x2D */
u16 err; /* 0x2E Error Register */
u32 res5[52]; /* 0x30 - 0xFF */
u8 dchpri0; /* 0x100 Channel 0 Priority Register */
u8 dchpri1; /* 0x101 Channel 1 Priority Register */
u8 dchpri2; /* 0x102 Channel 2 Priority Register */
u8 dchpri3; /* 0x103 Channel 3 Priority Register */
u8 dchpri4; /* 0x104 Channel 4 Priority Register */
u8 dchpri5; /* 0x105 Channel 5 Priority Register */
u8 dchpri6; /* 0x106 Channel 6 Priority Register */
u8 dchpri7; /* 0x107 Channel 7 Priority Register */
u8 dchpri8; /* 0x108 Channel 8 Priority Register */
u8 dchpri9; /* 0x109 Channel 9 Priority Register */
u8 dchpri10; /* 0x110 Channel 10 Priority Register */
u8 dchpri11; /* 0x111 Channel 11 Priority Register */
u8 dchpri12; /* 0x112 Channel 12 Priority Register */
u8 dchpri13; /* 0x113 Channel 13 Priority Register */
u8 dchpri14; /* 0x114 Channel 14 Priority Register */
u8 dchpri15; /* 0x115 Channel 15 Priority Register */
} edma_t;
/* TCD - eDMA*/
typedef struct tcd_ctrl {
u32 saddr; /* 0x00 Source Address */
u16 attr; /* 0x04 Transfer Attributes */
u16 soff; /* 0x06 Signed Source Address Offset */
u32 nbytes; /* 0x08 Minor Byte Count */
u32 slast; /* 0x0C Last Source Address Adjustment */
u32 daddr; /* 0x10 Destination address */
u16 citer; /* 0x14 Current Minor Loop Link, Major Loop Count */
u16 doff; /* 0x16 Signed Destination Address Offset */
u32 dlast_sga; /* 0x18 Last Destination Address Adjustment/Scatter Gather Address */
u16 biter; /* 0x1C Beginning Minor Loop Link, Major Loop Count */
u16 csr; /* 0x1E Control and Status */
} tcd_st;
typedef struct tcd_multiple {
tcd_st tcd[16];
} tcd_t;
/* Interrupt module registers */
typedef struct int0_ctrl {
/* Interrupt Controller 0 */
u32 iprh0; /* 0x00 Pending Register High */
u32 iprl0; /* 0x04 Pending Register Low */
u32 imrh0; /* 0x08 Mask Register High */
u32 imrl0; /* 0x0C Mask Register Low */
u32 frch0; /* 0x10 Force Register High */
u32 frcl0; /* 0x14 Force Register Low */
u16 res1; /* 0x18 - 0x19 */
u16 icfg0; /* 0x1A Configuration Register */
u8 simr0; /* 0x1C Set Interrupt Mask */
u8 cimr0; /* 0x1D Clear Interrupt Mask */
u8 clmask0; /* 0x1E Current Level Mask */
u8 slmask; /* 0x1F Saved Level Mask */
u32 res2[8]; /* 0x20 - 0x3F */
u8 icr0[64]; /* 0x40 - 0x7F Control registers */
u32 res3[24]; /* 0x80 - 0xDF */
u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */
u8 res4[3]; /* 0xE1 - 0xE3 */
u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */
u8 res5[3]; /* 0xE5 - 0xE7 */
u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */
u8 res6[3]; /* 0xE9 - 0xEB */
u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */
u8 res7[3]; /* 0xED - 0xEF */
u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */
u8 res8[3]; /* 0xF1 - 0xF3 */
u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */
u8 res9[3]; /* 0xF5 - 0xF7 */
u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */
u8 resa[3]; /* 0xF9 - 0xFB */
u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */
u8 resb[3]; /* 0xFD - 0xFF */
} int0_t;
typedef struct int1_ctrl {
/* Interrupt Controller 1 */
u32 iprh1; /* 0x00 Pending Register High */
u32 iprl1; /* 0x04 Pending Register Low */
u32 imrh1; /* 0x08 Mask Register High */
u32 imrl1; /* 0x0C Mask Register Low */
u32 frch1; /* 0x10 Force Register High */
u32 frcl1; /* 0x14 Force Register Low */
u16 res1; /* 0x18 */
u16 icfg1; /* 0x1A Configuration Register */
u8 simr1; /* 0x1C Set Interrupt Mask */
u8 cimr1; /* 0x1D Clear Interrupt Mask */
u16 res2; /* 0x1E - 0x1F */
u32 res3[8]; /* 0x20 - 0x3F */
u8 icr1[64]; /* 0x40 - 0x7F */
u32 res4[24]; /* 0x80 - 0xDF */
u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */
u8 res5[3]; /* 0xE1 - 0xE3 */
u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */
u8 res6[3]; /* 0xE5 - 0xE7 */
u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */
u8 res7[3]; /* 0xE9 - 0xEB */
u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */
u8 res8[3]; /* 0xED - 0xEF */
u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */
u8 res9[3]; /* 0xF1 - 0xF3 */
u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */
u8 resa[3]; /* 0xF5 - 0xF7 */
u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */
u8 resb[3]; /* 0xF9 - 0xFB */
u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */
u8 resc[3]; /* 0xFD - 0xFF */
} int1_t;
typedef struct intgack_ctrl1 {
/* Global IACK Registers */
u8 swiack; /* 0xE0 Global Software Interrupt Acknowledge */
u8 Lniack[7]; /* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */
} intgack_t;
/*I2C module registers */
typedef struct i2c_ctrl {
u8 adr; /* 0x00 address register */
u8 res1[3]; /* 0x01 - 0x03 */
u8 fdr; /* 0x04 frequency divider register */
u8 res2[3]; /* 0x05 - 0x07 */
u8 cr; /* 0x08 control register */
u8 res3[3]; /* 0x09 - 0x0B */
u8 sr; /* 0x0C status register */
u8 res4[3]; /* 0x0D - 0x0F */
u8 dr; /* 0x10 data register */
u8 res5[3]; /* 0x11 - 0x13 */
} i2c_t;
/* QSPI module registers */
typedef struct qspi_ctrl {
u16 qmr; /* Mode register */
u16 res1;
u16 qdlyr; /* Delay register */
u16 res2;
u16 qwr; /* Wrap register */
u16 res3;
u16 qir; /* Interrupt register */
u16 res4;
u16 qar; /* Address register */
u16 res5;
u16 qdr; /* Data register */
u16 res6;
} qspi_t;
/* PWM module registers */
typedef struct pwm_ctrl {
u8 en; /* 0x00 PWM Enable Register */
u8 pol; /* 0x01 Polarity Register */
u8 clk; /* 0x02 Clock Select Register */
u8 prclk; /* 0x03 Prescale Clock Select Register */
u8 cae; /* 0x04 Center Align Enable Register */
u8 ctl; /* 0x05 Control Register */
u8 res1[2]; /* 0x06 - 0x07 */
u8 scla; /* 0x08 Scale A register */
u8 sclb; /* 0x09 Scale B register */
u8 res2[2]; /* 0x0A - 0x0B */
u8 cnt0; /* 0x0C Channel 0 Counter register */
u8 cnt1; /* 0x0D Channel 1 Counter register */
u8 cnt2; /* 0x0E Channel 2 Counter register */
u8 cnt3; /* 0x0F Channel 3 Counter register */
u8 cnt4; /* 0x10 Channel 4 Counter register */
u8 cnt5; /* 0x11 Channel 5 Counter register */
u8 cnt6; /* 0x12 Channel 6 Counter register */
u8 cnt7; /* 0x13 Channel 7 Counter register */
u8 per0; /* 0x14 Channel 0 Period register */
u8 per1; /* 0x15 Channel 1 Period register */
u8 per2; /* 0x16 Channel 2 Period register */
u8 per3; /* 0x17 Channel 3 Period register */
u8 per4; /* 0x18 Channel 4 Period register */
u8 per5; /* 0x19 Channel 5 Period register */
u8 per6; /* 0x1A Channel 6 Period register */
u8 per7; /* 0x1B Channel 7 Period register */
u8 dty0; /* 0x1C Channel 0 Duty register */
u8 dty1; /* 0x1D Channel 1 Duty register */
u8 dty2; /* 0x1E Channel 2 Duty register */
u8 dty3; /* 0x1F Channel 3 Duty register */
u8 dty4; /* 0x20 Channel 4 Duty register */
u8 dty5; /* 0x21 Channel 5 Duty register */
u8 dty6; /* 0x22 Channel 6 Duty register */
u8 dty7; /* 0x23 Channel 7 Duty register */
u8 sdn; /* 0x24 Shutdown register */
u8 res3[3]; /* 0x25 - 0x27 */
} pwm_t;
/* Edge Port module registers */
typedef struct eport_ctrl {
u16 par; /* 0x00 Pin Assignment Register */
u8 ddar; /* 0x02 Data Direction Register */
u8 ier; /* 0x03 Interrupt Enable Register */
u8 dr; /* 0x04 Data Register */
u8 pdr; /* 0x05 Pin Data Register */
u8 fr; /* 0x06 Flag_Register */
u8 res1;
} eport_t;
/* Watchdog registers */
typedef struct wdog_ctrl {
u16 cr; /* 0x00 Control register */
u16 mr; /* 0x02 Modulus register */
u16 cntr; /* 0x04 Count register */
u16 sr; /* 0x06 Service register */
} wdog_t;
/*Chip configuration module registers */
typedef struct ccm_ctrl {
u8 rstctrl; /* 0x00 Reset Controller register */
u8 rststat; /* 0x01 Reset Status register */
u16 res1; /* 0x02 - 0x03 */
u16 ccr; /* 0x04 Chip configuration register */
u16 res2; /* 0x06 */
u16 rcon; /* 0x08 Rreset configuration register */
u16 cir; /* 0x0A Chip identification register */
u32 res3; /* 0x0C */
u16 misccr; /* 0x10 Miscellaneous control register */
u16 cdr; /* 0x12 Clock divider register */
u16 uhcsr; /* 0x14 USB Host controller status register */
u16 uocsr; /* 0x16 USB On-the-Go Controller Status Register */
} ccm_t;
/* GPIO port registers */
typedef struct gpio_ctrl {
/* Port Output Data Registers */
u8 podr_fech; /* 0x00 */
u8 podr_fecl; /* 0x01 */
u8 podr_ssi; /* 0x02 */
u8 podr_busctl; /* 0x03 */
u8 podr_be; /* 0x04 */
u8 podr_cs; /* 0x05 */
u8 podr_pwm; /* 0x06 */
u8 podr_feci2c; /* 0x07 */
u8 res1; /* 0x08 */
u8 podr_uart; /* 0x09 */
u8 podr_qspi; /* 0x0A */
u8 podr_timer; /* 0x0B */
u8 res2; /* 0x0C */
u8 podr_lcddatah; /* 0x0D */
u8 podr_lcddatam; /* 0x0E */
u8 podr_lcddatal; /* 0x0F */
u8 podr_lcdctlh; /* 0x10 */
u8 podr_lcdctll; /* 0x11 */
/* Port Data Direction Registers */
u16 res3; /* 0x12 - 0x13 */
u8 pddr_fech; /* 0x14 */
u8 pddr_fecl; /* 0x15 */
u8 pddr_ssi; /* 0x16 */
u8 pddr_busctl; /* 0x17 */
u8 pddr_be; /* 0x18 */
u8 pddr_cs; /* 0x19 */
u8 pddr_pwm; /* 0x1A */
u8 pddr_feci2c; /* 0x1B */
u8 res4; /* 0x1C */
u8 pddr_uart; /* 0x1D */
u8 pddr_qspi; /* 0x1E */
u8 pddr_timer; /* 0x1F */
u8 res5; /* 0x20 */
u8 pddr_lcddatah; /* 0x21 */
u8 pddr_lcddatam; /* 0x22 */
u8 pddr_lcddatal; /* 0x23 */
u8 pddr_lcdctlh; /* 0x24 */
u8 pddr_lcdctll; /* 0x25 */
u16 res6; /* 0x26 - 0x27 */
/* Port Data Direction Registers */
u8 ppd_fech; /* 0x28 */
u8 ppd_fecl; /* 0x29 */
u8 ppd_ssi; /* 0x2A */
u8 ppd_busctl; /* 0x2B */
u8 ppd_be; /* 0x2C */
u8 ppd_cs; /* 0x2D */
u8 ppd_pwm; /* 0x2E */
u8 ppd_feci2c; /* 0x2F */
u8 res7; /* 0x30 */
u8 ppd_uart; /* 0x31 */
u8 ppd_qspi; /* 0x32 */
u8 ppd_timer; /* 0x33 */
u8 res8; /* 0x34 */
u8 ppd_lcddatah; /* 0x35 */
u8 ppd_lcddatam; /* 0x36 */
u8 ppd_lcddatal; /* 0x37 */
u8 ppd_lcdctlh; /* 0x38 */
u8 ppd_lcdctll; /* 0x39 */
u16 res9; /* 0x3A - 0x3B */
/* Port Clear Output Data Registers */
u8 pclrr_fech; /* 0x3C */
u8 pclrr_fecl; /* 0x3D */
u8 pclrr_ssi; /* 0x3E */
u8 pclrr_busctl; /* 0x3F */
u8 pclrr_be; /* 0x40 */
u8 pclrr_cs; /* 0x41 */
u8 pclrr_pwm; /* 0x42 */
u8 pclrr_feci2c; /* 0x43 */
u8 res10; /* 0x44 */
u8 pclrr_uart; /* 0x45 */
u8 pclrr_qspi; /* 0x46 */
u8 pclrr_timer; /* 0x47 */
u8 res11; /* 0x48 */
u8 pclrr_lcddatah; /* 0x49 */
u8 pclrr_lcddatam; /* 0x4A */
u8 pclrr_lcddatal; /* 0x4B */
u8 pclrr_lcdctlh; /* 0x4C */
u8 pclrr_lcdctll; /* 0x4D */
u16 res12; /* 0x4E - 0x4F */
/* Pin Assignment Registers */
u8 par_fec; /* 0x50 */
u8 par_pwm; /* 0x51 */
u8 par_busctl; /* 0x52 */
u8 par_feci2c; /* 0x53 */
u8 par_be; /* 0x54 */
u8 par_cs; /* 0x55 */
u16 par_ssi; /* 0x56 */
u16 par_uart; /* 0x58 */
u16 par_qspi; /* 0x5A */
u8 par_timer; /* 0x5C */
u8 par_lcddata; /* 0x5D */
u16 par_lcdctl; /* 0x5E */
u16 par_irq; /* 0x60 */
u16 res16; /* 0x62 - 0x63 */
/* Mode Select Control Registers */
u8 mscr_flexbus; /* 0x64 */
u8 mscr_sdram; /* 0x65 */
u16 res17; /* 0x66 - 0x67 */
/* Drive Strength Control Registers */
u8 dscr_i2c; /* 0x68 */
u8 dscr_pwm; /* 0x69 */
u8 dscr_fec; /* 0x6A */
u8 dscr_uart; /* 0x6B */
u8 dscr_qspi; /* 0x6C */
u8 dscr_timer; /* 0x6D */
u8 dscr_ssi; /* 0x6E */
u8 dscr_lcd; /* 0x6F */
u8 dscr_debug; /* 0x70 */
u8 dscr_clkrst; /* 0x71 */
u8 dscr_irq; /* 0x72 */
} gpio_t;
/* LCD module registers */
typedef struct lcd_ctrl {
u32 ssar; /* 0x00 Screen Start Address Register */
u32 sr; /* 0x04 LCD Size Register */
u32 vpw; /* 0x08 Virtual Page Width Register */
u32 cpr; /* 0x0C Cursor Position Register */
u32 cwhb; /* 0x10 Cursor Width Height and Blink Register */
u32 ccmr; /* 0x14 Color Cursor Mapping Register */
u32 pcr; /* 0x18 Panel Configuration Register */
u32 hcr; /* 0x1C Horizontal Configuration Register */
u32 vcr; /* 0x20 Vertical Configuration Register */
u32 por; /* 0x24 Panning Offset Register */
u32 scr; /* 0x28 Sharp Configuration Register */
u32 pccr; /* 0x2C PWM Contrast Control Register */
u32 dcr; /* 0x30 DMA Control Register */
u32 rmcr; /* 0x34 Refresh Mode Control Register */
u32 icr; /* 0x38 Refresh Mode Control Register */
u32 ier; /* 0x3C Interrupt Enable Register */
u32 isr; /* 0x40 Interrupt Status Register */
u32 res[4];
u32 gwsar; /* 0x50 Graphic Window Start Address Register */
u32 gwsr; /* 0x54 Graphic Window Size Register */
u32 gwvpw; /* 0x58 Graphic Window Virtual Page Width Register */
u32 gwpor; /* 0x5C Graphic Window Panning Offset Register */
u32 gwpr; /* 0x60 Graphic Window Position Register */
u32 gwcr; /* 0x64 Graphic Window Control Register */
u32 gwdcr; /* 0x68 Graphic Window DMA Control Register */
} lcd_t;
typedef struct lcdbg_ctrl {
u32 bglut[255];
} lcdbg_t;
typedef struct lcdgw_ctrl {
u32 gwlut[255];
} lcdgw_t;
/* USB OTG module registers */
typedef struct usb_otg {
u32 id; /* 0x000 Identification Register */
u32 hwgeneral; /* 0x004 General HW Parameters */
u32 hwhost; /* 0x008 Host HW Parameters */
u32 hwdev; /* 0x00C Device HW parameters */
u32 hwtxbuf; /* 0x010 TX Buffer HW Parameters */
u32 hwrxbuf; /* 0x014 RX Buffer HW Parameters */
u32 res1[58]; /* 0x18 - 0xFF */
u8 caplength; /* 0x100 Capability Register Length */
u8 res2; /* 0x101 */
u16 hciver; /* 0x102 Host Interface Version Number */
u32 hcsparams; /* 0x104 Host Structural Parameters */
u32 hccparams; /* 0x108 Host Capability Parameters */
u32 res3[5]; /* 0x10C - 0x11F */
u16 dciver; /* 0x120 Device Interface Version Number */
u16 res4; /* 0x122 */
u32 dccparams; /* 0x124 Device Capability Parameters */
u32 res5[6]; /* 0x128 - 0x13F */
u32 cmd; /* 0x140 USB Command */
u32 sts; /* 0x144 USB Status */
u32 intr; /* 0x148 USB Interrupt Enable */
u32 frindex; /* 0x14C USB Frame Index */
u32 res6; /* 0x150 */
u32 prd_dev; /* 0x154 Periodic Frame List Base or Device Address */
u32 aync_ep; /* 0x158 Current Asynchronous List or Address at Endpoint List Address */
u32 ttctrl; /* 0x15C Host TT Asynchronous Buffer Control */
u32 burstsize; /* 0x160 Master Interface Data Burst Size */
u32 txfill; /* 0x164 Host Transmit FIFO Tuning Control */
u32 res7[6]; /* 0x168 - 0x17F */
u32 cfgflag; /* 0x180 Configure Flag Register */
u32 portsc1; /* 0x184 Port Status/Control */
u32 res8[7]; /* 0x188 - 0x1A3 */
u32 otgsc; /* 0x1A4 On The Go Status and Control */
u32 mode; /* 0x1A8 USB mode register */
u32 eptsetstat; /* 0x1AC Endpoint Setup status */
u32 eptprime; /* 0x1B0 Endpoint initialization */
u32 eptflush; /* 0x1B4 Endpoint de-initialize */
u32 eptstat; /* 0x1B8 Endpoint status */
u32 eptcomplete; /* 0x1BC Endpoint Complete */
u32 eptctrl0; /* 0x1C0 Endpoint control 0 */
u32 eptctrl1; /* 0x1C4 Endpoint control 1 */
u32 eptctrl2; /* 0x1C8 Endpoint control 2 */
u32 eptctrl3; /* 0x1CC Endpoint control 3 */
} usbotg_t;
/* USB Host module registers */
typedef struct usb_host {
u32 id; /* 0x000 Identification Register */
u32 hwgeneral; /* 0x004 General HW Parameters */
u32 hwhost; /* 0x008 Host HW Parameters */
u32 res1; /* 0x0C */
u32 hwtxbuf; /* 0x010 TX Buffer HW Parameters */
u32 hwrxbuf; /* 0x014 RX Buffer HW Parameters */
u32 res2[58]; /* 0x18 - 0xFF */
/* Host Controller Capability Register */
u8 caplength; /* 0x100 Capability Register Length */
u8 res3; /* 0x101 */
u16 hciver; /* 0x102 Host Interface Version Number */
u32 hcsparams; /* 0x104 Host Structural Parameters */
u32 hccparams; /* 0x108 Host Capability Parameters */
u32 res4[13]; /* 0x10C - 0x13F */
/* Host Controller Operational Register */
u32 cmd; /* 0x140 USB Command */
u32 sts; /* 0x144 USB Status */
u32 intr; /* 0x148 USB Interrupt Enable */
u32 frindex; /* 0x14C USB Frame Index */
u32 res5; /* 0x150 (ctrl segment register in EHCI spec) */
u32 prdlst; /* 0x154 Periodic Frame List Base Address */
u32 aynclst; /* 0x158 Current Asynchronous List Address */
u32 ttctrl; /* 0x15C Host TT Asynchronous Buffer Control (non-ehci) */
u32 burstsize; /* 0x160 Master Interface Data Burst Size (non-ehci) */
u32 txfill; /* 0x164 Host Transmit FIFO Tuning Control (non-ehci) */
u32 res6[6]; /* 0x168 - 0x17F */
u32 cfgflag; /* 0x180 Configure Flag Register */
u32 portsc1; /* 0x184 Port Status/Control */
u32 res7[8]; /* 0x188 - 0x1A7 */
/* non-ehci registers */
u32 mode; /* 0x1A8 USB mode register */
u32 eptsetstat; /* 0x1AC Endpoint Setup status */
u32 eptprime; /* 0x1B0 Endpoint initialization */
u32 eptflush; /* 0x1B4 Endpoint de-initialize */
u32 eptstat; /* 0x1B8 Endpoint status */
u32 eptcomplete; /* 0x1BC Endpoint Complete */
u32 eptctrl0; /* 0x1C0 Endpoint control 0 */
u32 eptctrl1; /* 0x1C4 Endpoint control 1 */
u32 eptctrl2; /* 0x1C8 Endpoint control 2 */
u32 eptctrl3; /* 0x1CC Endpoint control 3 */
} usbhost_t;
/* SDRAM controller registers */
typedef struct sdram_ctrl {
u32 mode; /* 0x00 Mode/Extended Mode register */
u32 ctrl; /* 0x04 Control register */
u32 cfg1; /* 0x08 Configuration register 1 */
u32 cfg2; /* 0x0C Configuration register 2 */
u32 res1[64]; /* 0x10 - 0x10F */
u32 cs0; /* 0x110 Chip Select 0 Configuration */
u32 cs1; /* 0x114 Chip Select 1 Configuration */
} sdram_t;
/* Synchronous serial interface */
typedef struct ssi_ctrl {
u32 tx0; /* 0x00 Transmit Data Register 0 */
u32 tx1; /* 0x04 Transmit Data Register 1 */
u32 rx0; /* 0x08 Receive Data Register 0 */
u32 rx1; /* 0x0C Receive Data Register 1 */
u32 cr; /* 0x10 Control Register */
u32 isr; /* 0x14 Interrupt Status Register */
u32 ier; /* 0x18 Interrupt Enable Register */
u32 tcr; /* 0x1C Transmit Configuration Register */
u32 rcr; /* 0x20 Receive Configuration Register */
u32 ccr; /* 0x24 Clock Control Register */
u32 res1; /* 0x28 */
u32 fcsr; /* 0x2C FIFO Control/Status Register */
u32 res2[2]; /* 0x30 - 0x37 */
u32 acr; /* 0x38 AC97 Control Register */
u32 acadd; /* 0x3C AC97 Command Address Register */
u32 acdat; /* 0x40 AC97 Command Data Register */
u32 atag; /* 0x44 AC97 Tag Register */
u32 tmask; /* 0x48 Transmit Time Slot Mask Register */
u32 rmask; /* 0x4C Receive Time Slot Mask Register */
} ssi_t;
/* Clock Module registers */
typedef struct pll_ctrl {
u8 podr; /* 0x00 Output Divider Register */
u8 res1[3];
u8 pcr; /* 0x04 Control Register */
u8 res2[3];
u8 pmdr; /* 0x08 Modulation Divider Register */
u8 res3[3];
u8 pfdr; /* 0x0C Feedback Divider Register */
u8 res4[3];
} pll_t;
#endif /* __IMMAP_5329__ */

View File

@ -1,8 +1,221 @@
#ifndef __ASM_M68K_IO_H_
#define __ASM_M68K_IO_H_
/*
* IO header file
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_M68K_IO_H__
#define __ASM_M68K_IO_H__
#include <asm/byteorder.h>
#define readb(addr) in_8((volatile u8 *)(addr))
#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
#if !defined(__BIG_ENDIAN)
#define readw(addr) (*(volatile u16 *) (addr))
#define readl(addr) (*(volatile u32 *) (addr))
#define writew(b,addr) ((*(volatile u16 *) (addr)) = (b))
#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b))
#else
#define readw(addr) in_le16((volatile u16 *)(addr))
#define readl(addr) in_le32((volatile u32 *)(addr))
#define writew(b,addr) out_le16((volatile u16 *)(addr),(b))
#define writel(b,addr) out_le32((volatile u32 *)(addr),(b))
#endif
/*
* The insw/outsw/insl/outsl macros don't do byte-swapping.
* They are only used in practice for transferring buffers which
* are arrays of bytes, and byte-swapping is not appropriate in
* that case. - paulus
*/
#define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns))
#define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns))
#define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
#define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
#define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
#define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
#define inb(port) in_8((u8 *)((port)+_IO_BASE))
#define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val))
#if !defined(__BIG_ENDIAN)
#define inw(port) in_be16((u16 *)((port)+_IO_BASE))
#define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val))
#define inl(port) in_be32((u32 *)((port)+_IO_BASE))
#define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val))
#else
#define inw(port) in_le16((u16 *)((port)+_IO_BASE))
#define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val))
#define inl(port) in_le32((u32 *)((port)+_IO_BASE))
#define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val))
#endif
extern inline void _insb(volatile u8 * port, void *buf, int ns)
{
u8 *data = (u8 *) buf;
while (ns--)
*data++ = *port;
}
extern inline void _outsb(volatile u8 * port, const void *buf, int ns)
{
u8 *data = (u8 *) buf;
while (ns--)
*port = *data++;
}
extern inline void _insw(volatile u16 * port, void *buf, int ns)
{
u16 *data = (u16 *) buf;
while (ns--)
*data++ = __sw16(*port);
}
extern inline void _outsw(volatile u16 * port, const void *buf, int ns)
{
u16 *data = (u16 *) buf;
while (ns--) {
*port = __sw16(*data);
data++;
}
}
extern inline void _insl(volatile u32 * port, void *buf, int nl)
{
u32 *data = (u32 *) buf;
while (nl--)
*data++ = __sw32(*port);
}
extern inline void _outsl(volatile u32 * port, const void *buf, int nl)
{
u32 *data = (u32 *) buf;
while (nl--) {
*port = __sw32(*data);
data++;
}
}
extern inline void _insw_ns(volatile u16 * port, void *buf, int ns)
{
u16 *data = (u16 *) buf;
while (ns--)
*data++ = *port;
}
extern inline void _outsw_ns(volatile u16 * port, const void *buf, int ns)
{
u16 *data = (u16 *) buf;
while (ns--) {
*port = *data++;
}
}
extern inline void _insl_ns(volatile u32 * port, void *buf, int nl)
{
u32 *data = (u32 *) buf;
while (nl--)
*data++ = *port;
}
extern inline void _outsl_ns(volatile u32 * port, const void *buf, int nl)
{
u32 *data = (u32 *) buf;
while (nl--) {
*port = *data;
data++;
}
}
/*
* The *_ns versions below don't do byte-swapping.
* Neither do the standard versions now, these are just here
* for older code.
*/
#define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
#define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns))
#define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
#define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl))
#define IO_SPACE_LIMIT ~0
/*
* 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
*/
extern inline int in_8(volatile u8 * addr)
{
return (int)*addr;
}
extern inline void out_8(volatile u8 * addr, int val)
{
*addr = (u8) val;
}
extern inline int in_le16(volatile u16 * addr)
{
return __sw16(*addr);
}
extern inline int in_be16(volatile u16 * addr)
{
return (*addr & 0xFFFF);
}
extern inline void out_le16(volatile u16 * addr, int val)
{
*addr = __sw16(val);
}
extern inline void out_be16(volatile u16 * addr, int val)
{
*addr = (u16) val;
}
extern inline unsigned in_le32(volatile u32 * addr)
{
return __sw32(*addr);
}
extern inline unsigned in_be32(volatile u32 * addr)
{
return (*addr);
}
extern inline void out_le32(volatile unsigned *addr, int val)
{
*addr = __sw32(val);
}
extern inline void out_be32(volatile unsigned *addr, int val)
{
*addr = val;
}
static inline void sync(void)
{
/* This sync function is for PowerPC or other architecture instruction
* ColdFire does not have this instruction. Dummy function, added for
* compatibility (CFI driver)
*/
}
#endif /* __ASM_M68K_IO_H_ */
#endif /* __ASM_M68K_IO_H__ */

2023
include/asm-m68k/m5329.h Normal file

File diff suppressed because it is too large Load Diff

View File

@ -35,32 +35,31 @@
* Get address specific defines for this ColdFire member.
*/
#if defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */
#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */
#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */
#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */
#elif defined(CONFIG_M5272)
#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */
#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */
#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */
#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */
#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */
#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */
#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */
#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */
#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */
#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */
#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */
#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */
#elif defined(CONFIG_M5282) | defined(CONFIG_M5271)
#define MCFTIMER_BASE1 0x150000 /* Base address of TIMER1 */
#define MCFTIMER_BASE2 0x160000 /* Base address of TIMER2 */
#define MCFTIMER_BASE3 0x170000 /* Base address of TIMER4 */
#define MCFTIMER_BASE1 0x150000 /* Base address of TIMER1 */
#define MCFTIMER_BASE2 0x160000 /* Base address of TIMER2 */
#define MCFTIMER_BASE3 0x170000 /* Base address of TIMER4 */
#define MCFTIMER_BASE4 0x180000 /* Base address of TIMER3 */
#endif
/*
* Define the TIMER register set addresses.
*/
#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */
#define MCFTIMER_TRR 0x02 /* Timer Reference (r/w) */
#define MCFTIMER_TCR 0x04 /* Timer Capture reg (r/w) */
#define MCFTIMER_TCN 0x06 /* Timer Counter reg (r/w) */
#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */
#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */
#define MCFTIMER_TRR 0x02 /* Timer Reference (r/w) */
#define MCFTIMER_TCR 0x04 /* Timer Capture reg (r/w) */
#define MCFTIMER_TCN 0x06 /* Timer Counter reg (r/w) */
#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */
/*
* Define the TIMER register set addresses for 5282.
@ -73,29 +72,29 @@
* Bit definitions for the Timer Mode Register (TMR).
* Register bit flags are common accross ColdFires.
*/
#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */
#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */
#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */
#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */
#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */
#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */
#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */
#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */
#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */
#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */
#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */
#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */
#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */
#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */
#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */
#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */
#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */
#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */
#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */
#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */
#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */
#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */
#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */
#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */
#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */
#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */
#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */
#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */
#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */
#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */
#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */
#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */
#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */
#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */
/*
* Bit definitions for the Timer Event Registers (TER).
*/
#define MCFTIMER_TER_CAP 0x01 /* Capture event */
#define MCFTIMER_TER_REF 0x02 /* Refernece event */
#define MCFTIMER_TER_CAP 0x01 /* Capture event */
#define MCFTIMER_TER_REF 0x02 /* Refernece event */
/*
* Bit definitions for the 5282 PIT Control and Status Register (PCSR).
@ -108,6 +107,5 @@
#define MCFTIMER_PCSR_HALTED 0x0020
#define MCFTIMER_PCSR_DOZE 0x0040
/****************************************************************************/
#endif /* mcftimer_h */
#endif /* mcftimer_h */

View File

@ -36,106 +36,105 @@
* space.
*/
#if defined(CONFIG_M5272)
#define MCFUART_BASE1 0x100 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#define MCFUART_BASE1 0x100 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#if defined(CONFIG_NETtel)
#define MCFUART_BASE1 0x180 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#define MCFUART_BASE1 0x180 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#else
#define MCFUART_BASE1 0x140 /* Base address of UART1 */
#define MCFUART_BASE2 0x180 /* Base address of UART2 */
#define MCFUART_BASE1 0x140 /* Base address of UART1 */
#define MCFUART_BASE2 0x180 /* Base address of UART2 */
#endif
#elif defined(CONFIG_M5282) || defined(CONFIG_M5271)
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x240 /* Base address of UART2 */
#define MCFUART_BASE3 0x280 /* Base address of UART3 */
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x240 /* Base address of UART2 */
#define MCFUART_BASE3 0x280 /* Base address of UART3 */
#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
#if defined(CONFIG_NETtel) || defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3)
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
#else
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */
#endif
#endif
/*
* Define the ColdFire UART register set addresses.
*/
#define MCFUART_UMR 0x00 /* Mode register (r/w) */
#define MCFUART_USR 0x04 /* Status register (r) */
#define MCFUART_UCSR 0x04 /* Clock Select (w) */
#define MCFUART_UCR 0x08 /* Command register (w) */
#define MCFUART_URB 0x0c /* Receiver Buffer (r) */
#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */
#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */
#define MCFUART_UISR 0x14 /* Interrup Status (r) */
#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */
#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */
#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */
#define MCFUART_UMR 0x00 /* Mode register (r/w) */
#define MCFUART_USR 0x04 /* Status register (r) */
#define MCFUART_UCSR 0x04 /* Clock Select (w) */
#define MCFUART_UCR 0x08 /* Command register (w) */
#define MCFUART_URB 0x0c /* Receiver Buffer (r) */
#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */
#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */
#define MCFUART_UISR 0x14 /* Interrup Status (r) */
#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */
#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */
#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */
#ifdef CONFIG_M5272
#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */
#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */
#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */
#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */
#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
#else
#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
#endif
#define MCFUART_UIPR 0x34 /* Input Port (r) */
#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */
#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */
#define MCFUART_UIPR 0x34 /* Input Port (r) */
#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */
#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */
#ifdef CONFIG_M5249
/* Note: This isn't in the 5249 docs */
#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
#endif
/*
* Define bit flags in Mode Register 1 (MR1).
*/
#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */
#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */
#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */
#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */
#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */
#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */
#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */
#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */
#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */
#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */
#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */
#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */
#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */
#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */
#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */
#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */
#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */
#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */
#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */
#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */
#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */
#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */
#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */
#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */
#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */
#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */
#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */
#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */
/*
* Define bit flags in Mode Register 2 (MR2).
*/
#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */
#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */
#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */
#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */
#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */
#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */
#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */
#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */
#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */
#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */
#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */
#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */
#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */
#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */
#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */
#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */
/*
* Define bit flags in Status Register (USR).
*/
#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */
#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */
#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */
#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */
#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */
#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */
#define MCFUART_USR_RXFULL 0x02 /* Receiver full */
#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */
#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */
#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */
#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */
#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */
#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */
#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */
#define MCFUART_USR_RXFULL 0x02 /* Receiver full */
#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */
#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
@ -143,13 +142,13 @@
/*
* Define bit flags in Clock Select Register (UCSR).
*/
#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */
#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */
#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */
#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */
#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */
#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */
#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */
#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */
#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */
#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */
#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */
#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */
/*
* Define bit flags in Command Register (UCR).
@ -163,59 +162,56 @@
#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */
#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */
#define MCFUART_UCR_TXNULL 0x00 /* No TX command */
#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */
#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */
#define MCFUART_UCR_RXNULL 0x00 /* No RX command */
#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */
#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */
#define MCFUART_UCR_TXNULL 0x00 /* No TX command */
#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */
#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */
#define MCFUART_UCR_RXNULL 0x00 /* No RX command */
#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */
#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */
/*
* Define bit flags in Input Port Change Register (UIPCR).
*/
#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */
#define MCFUART_UIPCR_CTS 0x01 /* CTS value */
#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */
#define MCFUART_UIPCR_CTS 0x01 /* CTS value */
/*
* Define bit flags in Input Port Register (UIP).
*/
#define MCFUART_UIPR_CTS 0x01 /* CTS value */
#define MCFUART_UIPR_CTS 0x01 /* CTS value */
/*
* Define bit flags in Output Port Registers (UOP).
* Clear bit by writing to UOP0, set by writing to UOP1.
*/
#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */
#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */
/*
* Define bit flags in the Auxiliary Control Register (UACR).
*/
#define MCFUART_UACR_IEC 0x01 /* Input enable control */
#define MCFUART_UACR_IEC 0x01 /* Input enable control */
/*
* Define bit flags in Interrupt Status Register (UISR).
* These same bits are used for the Interrupt Mask Register (UIMR).
*/
#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */
#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */
#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */
#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */
#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */
#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */
#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */
#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */
#ifdef CONFIG_M5272
/*
* Define bit flags in the Transmitter FIFO Register (UTF).
*/
#define MCFUART_UTF_TXB 0x1f /* transmitter data level */
#define MCFUART_UTF_FULL 0x20 /* transmitter fifo full */
#define MCFUART_UTF_TXS 0xc0 /* transmitter status */
#define MCFUART_UTF_TXB 0x1f /* transmitter data level */
#define MCFUART_UTF_FULL 0x20 /* transmitter fifo full */
#define MCFUART_UTF_TXS 0xc0 /* transmitter status */
/*
* Define bit flags in the Receiver FIFO Register (URF).
*/
#define MCFUART_URF_RXB 0x1f /* receiver data level */
#define MCFUART_URF_FULL 0x20 /* receiver fifo full */
#define MCFUART_URF_RXS 0xc0 /* receiver status */
#define MCFUART_URF_RXB 0x1f /* receiver data level */
#define MCFUART_URF_FULL 0x20 /* receiver fifo full */
#define MCFUART_URF_RXS 0xc0 /* receiver status */
#endif
/****************************************************************************/
#endif /* mcfuart_h */

View File

@ -28,32 +28,32 @@
#ifndef __ASSEMBLY__
struct pt_regs {
ulong d0;
ulong d1;
ulong d2;
ulong d3;
ulong d4;
ulong d5;
ulong d6;
ulong d7;
ulong a0;
ulong a1;
ulong a2;
ulong a3;
ulong a4;
ulong a5;
ulong a6;
#if defined(CONFIG_M5272) || defined(CONFIG_M5282) || defined(CONFIG_M5249) || defined(CONFIG_M5271)
unsigned format : 4; /* frame format specifier */
unsigned vector : 12; /* vector offset */
ulong d0;
ulong d1;
ulong d2;
ulong d3;
ulong d4;
ulong d5;
ulong d6;
ulong d7;
ulong a0;
ulong a1;
ulong a2;
ulong a3;
ulong a4;
ulong a5;
ulong a6;
#if defined(__M68K__)
unsigned format:4; /* frame format specifier */
unsigned vector:12; /* vector offset */
unsigned short sr;
unsigned long pc;
unsigned long pc;
#else
unsigned short sr;
unsigned long pc;
unsigned long pc;
#endif
};
#endif /* #ifndef __ASSEMBLY__ */
#endif /* #ifndef __ASSEMBLY__ */
#endif /* #ifndef _M68K_PTRACE_H */
#endif /* #ifndef _M68K_PTRACE_H */

108
include/asm-m68k/rtc.h Normal file
View File

@ -0,0 +1,108 @@
/*
* RealTime Clock
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __MCFRTC_H__
#define __MCFRTC_H__
/* Real time Clock */
typedef struct rtc_ctrl {
u32 hourmin; /* 0x00 Hours and Minutes Counter Register */
u32 seconds; /* 0x04 Seconds Counter Register */
u32 alrm_hm; /* 0x08 Hours and Minutes Alarm Register */
u32 alrm_sec; /* 0x0C Seconds Alarm Register */
u32 cr; /* 0x10 Control Register */
u32 isr; /* 0x14 Interrupt Status Register */
u32 ier; /* 0x18 Interrupt Enable Register */
u32 stpwach; /* 0x1C Stopwatch Minutes Register */
u32 days; /* 0x20 Days Counter Register */
u32 alrm_day; /* 0x24 Days Alarm Register */
} rtc_t;
/* Bit definitions and macros for HOURMIN */
#define RTC_HOURMIN_MINUTES(x) (((x)&0x0000003F))
#define RTC_HOURMIN_HOURS(x) (((x)&0x0000001F)<<8)
/* Bit definitions and macros for SECONDS */
#define RTC_SECONDS_SECONDS(x) (((x)&0x0000003F))
/* Bit definitions and macros for ALRM_HM */
#define RTC_ALRM_HM_MINUTES(x) (((x)&0x0000003F))
#define RTC_ALRM_HM_HOURS(x) (((x)&0x0000001F)<<8)
/* Bit definitions and macros for ALRM_SEC */
#define RTC_ALRM_SEC_SECONDS(x) (((x)&0x0000003F))
/* Bit definitions and macros for CR */
#define RTC_CR_SWR (0x00000001)
#define RTC_CR_XTL(x) (((x)&0x00000003)<<5)
#define RTC_CR_EN (0x00000080)
#define RTC_CR_32768 (0x0)
#define RTC_CR_32000 (0x1)
#define RTC_CR_38400 (0x2)
/* Bit definitions and macros for ISR */
#define RTC_ISR_SW (0x00000001)
#define RTC_ISR_MIN (0x00000002)
#define RTC_ISR_ALM (0x00000004)
#define RTC_ISR_DAY (0x00000008)
#define RTC_ISR_1HZ (0x00000010)
#define RTC_ISR_HR (0x00000020)
#define RTC_ISR_2HZ (0x00000080)
#define RTC_ISR_SAM0 (0x00000100)
#define RTC_ISR_SAM1 (0x00000200)
#define RTC_ISR_SAM2 (0x00000400)
#define RTC_ISR_SAM3 (0x00000800)
#define RTC_ISR_SAM4 (0x00001000)
#define RTC_ISR_SAM5 (0x00002000)
#define RTC_ISR_SAM6 (0x00004000)
#define RTC_ISR_SAM7 (0x00008000)
/* Bit definitions and macros for IER */
#define RTC_IER_SW (0x00000001)
#define RTC_IER_MIN (0x00000002)
#define RTC_IER_ALM (0x00000004)
#define RTC_IER_DAY (0x00000008)
#define RTC_IER_1HZ (0x00000010)
#define RTC_IER_HR (0x00000020)
#define RTC_IER_2HZ (0x00000080)
#define RTC_IER_SAM0 (0x00000100)
#define RTC_IER_SAM1 (0x00000200)
#define RTC_IER_SAM2 (0x00000400)
#define RTC_IER_SAM3 (0x00000800)
#define RTC_IER_SAM4 (0x00001000)
#define RTC_IER_SAM5 (0x00002000)
#define RTC_IER_SAM6 (0x00004000)
#define RTC_IER_SAM7 (0x00008000)
/* Bit definitions and macros for STPWCH */
#define RTC_STPWCH_CNT(x) (((x)&0x0000003F))
/* Bit definitions and macros for DAYS */
#define RTC_DAYS_DAYS(x) (((x)&0x0000FFFF))
/* Bit definitions and macros for ALRM_DAY */
#define RTC_ALRM_DAY_DAYS(x) (((x)&0x0000FFFF))
#endif /* __MCFRTC_H__ */

104
include/asm-m68k/timer.h Normal file
View File

@ -0,0 +1,104 @@
/*
* timer.h -- ColdFire internal TIMER support defines.
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/****************************************************************************/
#ifndef timer_h
#define timer_h
/****************************************************************************/
/****************************************************************************/
/* Timer structure */
/****************************************************************************/
/* DMA Timer module registers */
typedef struct dtimer_ctrl {
u16 tmr; /* 0x00 Mode register */
u8 txmr; /* 0x02 Extended Mode register */
u8 ter; /* 0x03 Event register */
u32 trr; /* 0x04 Reference register */
u32 tcr; /* 0x08 Capture register */
u32 tcn; /* 0x0C Counter register */
} dtmr_t;
/*Programmable Interrupt Timer */
typedef struct pit_ctrl {
u16 pcsr; /* 0x00 Control and Status Register */
u16 pmr; /* 0x02 Modulus Register */
u16 pcntr; /* 0x04 Count Register */
} pit_t;
/*********************************************************************
* DMA Timers (DTIM)
*********************************************************************/
/* Bit definitions and macros for DTMR */
#define DTIM_DTMR_RST (0x0001) /* Reset */
#define DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) /* Input clock source */
#define DTIM_DTMR_FRR (0x0008) /* Free run/restart */
#define DTIM_DTMR_ORRI (0x0010) /* Output reference request/interrupt enable */
#define DTIM_DTMR_OM (0x0020) /* Output Mode */
#define DTIM_DTMR_CE(x) (((x)&0x0003)<<6) /* Capture Edge */
#define DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) /* Prescaler value */
#define DTIM_DTMR_RST_EN (0x0001)
#define DTIM_DTMR_RST_RST (0x0000)
#define DTIM_DTMR_CE_ANY (0x00C0)
#define DTIM_DTMR_CE_FALL (0x0080)
#define DTIM_DTMR_CE_RISE (0x0040)
#define DTIM_DTMR_CE_NONE (0x0000)
#define DTIM_DTMR_CLK_DTIN (0x0006)
#define DTIM_DTMR_CLK_DIV16 (0x0004)
#define DTIM_DTMR_CLK_DIV1 (0x0002)
#define DTIM_DTMR_CLK_STOP (0x0000)
/* Bit definitions and macros for DTXMR */
#define DTIM_DTXMR_MODE16 (0x01) /* Increment Mode */
#define DTIM_DTXMR_DMAEN (0x80) /* DMA request */
/* Bit definitions and macros for DTER */
#define DTIM_DTER_CAP (0x01) /* Capture event */
#define DTIM_DTER_REF (0x02) /* Output reference event */
/*********************************************************************
*
* Programmable Interrupt Timer Modules (PIT)
*
*********************************************************************/
/* Bit definitions and macros for PCSR */
#define PIT_PCSR_EN (0x0001)
#define PIT_PCSR_RLD (0x0002)
#define PIT_PCSR_PIF (0x0004)
#define PIT_PCSR_PIE (0x0008)
#define PIT_PCSR_OVW (0x0010)
#define PIT_PCSR_HALTED (0x0020)
#define PIT_PCSR_DOZE (0x0040)
#define PIT_PCSR_PRE(x) (((x)&0x000F)<<8)
/* Bit definitions and macros for PMR */
#define PIT_PMR_PM(x) (x)
/* Bit definitions and macros for PCNTR */
#define PIT_PCNTR_PC(x) (x)
/****************************************************************************/
#endif /* timer_h */

View File

@ -37,24 +37,36 @@
#ifndef __ASSEMBLY__
typedef struct bd_info {
unsigned long bi_memstart; /* start of DRAM memory */
unsigned long bi_memsize; /* size of DRAM memory in bytes */
unsigned long bi_flashstart; /* start of FLASH memory */
unsigned long bi_flashsize; /* size of FLASH memory */
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
unsigned long bi_mbar_base; /* base of internal registers */
unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_ip_addr; /* IP Address */
unsigned char bi_enetaddr[6]; /* Ethernet adress */
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
unsigned long bi_baudrate; /* Console Baudrate */
unsigned long bi_memstart; /* start of DRAM memory */
unsigned long bi_memsize; /* size of DRAM memory in bytes */
unsigned long bi_flashstart; /* start of FLASH memory */
unsigned long bi_flashsize; /* size of FLASH memory */
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
unsigned long bi_mbar_base; /* base of internal registers */
unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_ip_addr; /* IP Address */
unsigned char bi_enetaddr[6]; /* Ethernet adress */
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
unsigned long bi_baudrate; /* Console Baudrate */
#ifdef CONFIG_HAS_ETH1
/* second onboard ethernet port */
unsigned char bi_enet1addr[6];
#endif
#ifdef CONFIG_HAS_ETH2
/* third onboard ethernet port */
unsigned char bi_enet2addr[6];
#endif
#ifdef CONFIG_HAS_ETH3
unsigned char bi_enet3addr[6];
#endif
} bd_t;
#endif /* __ASSEMBLY__ */
#endif /* __ASSEMBLY__ */
#endif /* __U_BOOT_H__ */
#endif /* __U_BOOT_H__ */

171
include/asm-m68k/uart.h Normal file
View File

@ -0,0 +1,171 @@
/*
* uart.h -- ColdFire internal UART support defines.
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/****************************************************************************/
#ifndef uart_h
#define uart_h
/****************************************************************************/
/* UART module registers */
/* Register read/write struct */
typedef struct uart {
u8 umr; /* 0x00 Mode Register */
u8 resv0[0x3];
union {
u8 usr; /* 0x04 Status Register */
u8 ucsr; /* 0x04 Clock Select Register */
};
u8 resv1[0x3];
u8 ucr; /* 0x08 Command Register */
u8 resv2[0x3];
union {
u8 utb; /* 0x0c Transmit Buffer */
u8 urb; /* 0x0c Receive Buffer */
};
u8 resv3[0x3];
union {
u8 uipcr; /* 0x10 Input Port Change Register */
u8 uacr; /* 0x10 Auxiliary Control reg */
};
u8 resv4[0x3];
union {
u8 uimr; /* 0x14 Interrupt Mask reg */
u8 uisr; /* 0x14 Interrupt Status reg */
};
u8 resv5[0x3];
u8 ubg1; /* 0x18 Counter Timer Upper Register */
u8 resv6[0x3];
u8 ubg2; /* 0x1c Counter Timer Lower Register */
u8 resv7[0x17];
u8 uip; /* 0x34 Input Port Register */
u8 resv8[0x3];
u8 uop1; /* 0x38 Output Port Set Register */
u8 resv9[0x3];
u8 uop0; /* 0x3c Output Port Reset Register */
} uart_t;
/*********************************************************************
* Universal Asynchronous Receiver Transmitter (UART)
*********************************************************************/
/* Bit definitions and macros for UMR */
#define UART_UMR_BC(x) (((x)&0x03))
#define UART_UMR_PT (0x04)
#define UART_UMR_PM(x) (((x)&0x03)<<3)
#define UART_UMR_ERR (0x20)
#define UART_UMR_RXIRQ (0x40)
#define UART_UMR_RXRTS (0x80)
#define UART_UMR_SB(x) (((x)&0x0F))
#define UART_UMR_TXCTS (0x10) /* Trsnsmit CTS */
#define UART_UMR_TXRTS (0x20) /* Transmit RTS */
#define UART_UMR_CM(x) (((x)&0x03)<<6) /* CM bits */
#define UART_UMR_PM_MULTI_ADDR (0x1C)
#define UART_UMR_PM_MULTI_DATA (0x18)
#define UART_UMR_PM_NONE (0x10)
#define UART_UMR_PM_FORCE_HI (0x0C)
#define UART_UMR_PM_FORCE_LO (0x08)
#define UART_UMR_PM_ODD (0x04)
#define UART_UMR_PM_EVEN (0x00)
#define UART_UMR_BC_5 (0x00)
#define UART_UMR_BC_6 (0x01)
#define UART_UMR_BC_7 (0x02)
#define UART_UMR_BC_8 (0x03)
#define UART_UMR_CM_NORMAL (0x00)
#define UART_UMR_CM_ECH (0x40)
#define UART_UMR_CM_LOCAL_LOOP (0x80)
#define UART_UMR_CM_REMOTE_LOOP (0xC0)
#define UART_UMR_SB_STOP_BITS_1 (0x07)
#define UART_UMR_SB_STOP_BITS_15 (0x08)
#define UART_UMR_SB_STOP_BITS_2 (0x0F)
/* Bit definitions and macros for USR */
#define UART_USR_RXRDY (0x01)
#define UART_USR_FFULL (0x02)
#define UART_USR_TXRDY (0x04)
#define UART_USR_TXEMP (0x08)
#define UART_USR_OE (0x10)
#define UART_USR_PE (0x20)
#define UART_USR_FE (0x40)
#define UART_USR_RB (0x80)
/* Bit definitions and macros for UCSR */
#define UART_UCSR_TCS(x) (((x)&0x0F))
#define UART_UCSR_RCS(x) (((x)&0x0F)<<4)
#define UART_UCSR_RCS_SYS_CLK (0xD0)
#define UART_UCSR_RCS_CTM16 (0xE0)
#define UART_UCSR_RCS_CTM (0xF0)
#define UART_UCSR_TCS_SYS_CLK (0x0D)
#define UART_UCSR_TCS_CTM16 (0x0E)
#define UART_UCSR_TCS_CTM (0x0F)
/* Bit definitions and macros for UCR */
#define UART_UCR_RXC(x) (((x)&0x03))
#define UART_UCR_TXC(x) (((x)&0x03)<<2)
#define UART_UCR_MISC(x) (((x)&0x07)<<4)
#define UART_UCR_NONE (0x00)
#define UART_UCR_STOP_BREAK (0x70)
#define UART_UCR_START_BREAK (0x60)
#define UART_UCR_BKCHGINT (0x50)
#define UART_UCR_RESET_ERROR (0x40)
#define UART_UCR_RESET_TX (0x30)
#define UART_UCR_RESET_RX (0x20)
#define UART_UCR_RESET_MR (0x10)
#define UART_UCR_TX_DISABLED (0x08)
#define UART_UCR_TX_ENABLED (0x04)
#define UART_UCR_RX_DISABLED (0x02)
#define UART_UCR_RX_ENABLED (0x01)
/* Bit definitions and macros for UIPCR */
#define UART_UIPCR_CTS (0x01)
#define UART_UIPCR_COS (0x10)
/* Bit definitions and macros for UACR */
#define UART_UACR_IEC (0x01)
/* Bit definitions and macros for UIMR */
#define UART_UIMR_TXRDY (0x01)
#define UART_UIMR_RXRDY_FU (0x02)
#define UART_UIMR_DB (0x04)
#define UART_UIMR_COS (0x80)
/* Bit definitions and macros for UISR */
#define UART_UISR_TXRDY (0x01)
#define UART_UISR_RXRDY_FU (0x02)
#define UART_UISR_DB (0x04)
#define UART_UISR_RXFTO (0x08)
#define UART_UISR_TXFIFO (0x10)
#define UART_UISR_RXFIFO (0x20)
#define UART_UISR_COS (0x80)
/* Bit definitions and macros for UIP */
#define UART_UIP_CTS (0x01)
/* Bit definitions and macros for UOP1 */
#define UART_UOP1_RTS (0x01)
/* Bit definitions and macros for UOP0 */
#define UART_UOP0_RTS (0x01)
/****************************************************************************/
#endif /* mcfuart_h */

View File

@ -558,7 +558,7 @@ ulong bootcount_load (void);
#define BOOTCOUNT_MAGIC 0xB001C041
/* $(CPU)/.../<eth> */
void mii_init (void);
/*void mii_init (void);*/
/* $(CPU)/.../lcd.c */
ulong lcd_setmem (ulong);

272
include/configs/M5329EVB.h Normal file
View File

@ -0,0 +1,272 @@
/*
* Configuation settings for the Freescale MCF5329 FireEngine board.
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef _M5329EVB_H
#define _M5329EVB_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_MCF532x /* define processor family */
#define CONFIG_M5329 /* define processor type */
#undef DEBUG
#define CONFIG_MCFUART
#define CFG_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
#define DEFAULT_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_CACHE | \
CFG_CMD_DATE | \
CFG_CMD_ELF | \
CFG_CMD_FLASH | \
CFG_CMD_I2C | \
(CFG_CMD_LOADB | CFG_CMD_LOADS) | \
CFG_CMD_MEMORY | \
CFG_CMD_MISC | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_PING | \
CFG_CMD_REGINFO \
)
#ifdef NANDFLASH_SIZE
# define CONFIG_COMMANDS (DEFAULT_COMMANDS | CFG_CMD_NAND)
#else
# define CONFIG_COMMANDS (DEFAULT_COMMANDS)
#endif
#define CFG_UNIFY_CACHE
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CFG_DISCOVER_PHY
# define CFG_RX_ETH_BUFFER 8
# define CFG_FAULT_ECHO_LINK_DOWN
# define CFG_FEC0_PINMUX 0
# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
# define MCFFEC_TOUT_LOOP 50000
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
# ifndef CFG_DISCOVER_PHY
# define FECDUPLEX FULL
# define FECSPEED _100BASET
# else
# ifndef CFG_FAULT_ECHO_LINK_DOWN
# define CFG_FAULT_ECHO_LINK_DOWN
# endif
# endif /* CFG_DISCOVER_PHY */
#endif
#define CONFIG_MCFRTC
#undef RTC_DEBUG
/* Timer */
#define CONFIG_MCFTMR
#undef CONFIG_MCFPIT
/* I2C */
#define CONFIG_FSL_I2C
#define CONFIG_HARD_I2C /* I2C with hw support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 80000
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_OFFSET 0x58000
#define CFG_IMMR CFG_MBAR
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
#ifdef CONFIG_MCFFEC
# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
# define CONFIG_IPADDR 192.162.1.2
# define CONFIG_NETMASK 255.255.255.0
# define CONFIG_SERVERIP 192.162.1.1
# define CONFIG_GATEWAYIP 192.162.1.1
# define CONFIG_OVERWRITE_ETHADDR_ONCE
#endif /* FEC_ENET */
#define CONFIG_HOSTNAME M5329EVB
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"loadaddr=40010000\0" \
"u-boot=u-boot.bin\0" \
"load=tftp ${loadaddr) ${u-boot}\0" \
"upd=run load; run prog\0" \
"prog=prot off 0 2ffff;" \
"era 0 2ffff;" \
"cp.b ${loadaddr} 0 ${filesize};" \
"save\0" \
""
#define CONFIG_PRAM 512 /* 512 KB */
#define CFG_PROMPT "-> "
#define CFG_LONGHELP /* undef to save memory */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_LOAD_ADDR 0x40010000
#define CFG_HZ 1000
#define CFG_CLK 80000000
#define CFG_CPU_CLK CFG_CLK * 3
#define CFG_MBAR 0xFC000000
#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000)
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
#define CFG_INIT_RAM_ADDR 0x80000000
#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */
#define CFG_INIT_RAM_CTRL 0x221
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x40000000
#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
#define CFG_SDRAM_CFG1 0x53722730
#define CFG_SDRAM_CFG2 0x56670000
#define CFG_SDRAM_CTRL 0xE1092000
#define CFG_SDRAM_EMOD 0x40010000
#define CFG_SDRAM_MODE 0x018D0000
#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400
#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20)
#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_BOOTPARAMS_LEN 64*1024
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
#define CFG_FLASH_CFI
#ifdef CFG_FLASH_CFI
# define CFG_FLASH_CFI_DRIVER 1
# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */
# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
#endif
#ifdef NANDFLASH_SIZE
# define CFG_MAX_NAND_DEVICE 1
# define CFG_NAND_BASE (CFG_CS2_BASE << 16)
# define CFG_NAND_SIZE 1
# define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
# define NAND_MAX_CHIPS 1
# define NAND_ALLOW_ERASE_ALL 1
# define CONFIG_JFFS2_NAND 1
# define CONFIG_JFFS2_DEV "nand0"
# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1)
# define CONFIG_JFFS2_PART_OFFSET 0x00000000
#endif
#define CFG_FLASH_BASE 0
#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16)
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
*/
#define CFG_ENV_OFFSET 0x4000
#define CFG_ENV_SECT_SIZE 0x2000
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_IS_EMBEDDED 1
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16
/*-----------------------------------------------------------------------
* Chipselect bank definitions
*/
/*
* CS0 - NOR Flash 1, 2, 4, or 8MB
* CS1 - CompactFlash and registers
* CS2 - NAND Flash 16, 32, or 64MB
* CS3 - Available
* CS4 - Available
* CS5 - Available
*/
#define CFG_CS0_BASE 0
#define CFG_CS0_MASK 0x007f0001
#define CFG_CS0_CTRL 0x00001fa0
#define CFG_CS1_BASE 0x1000
#define CFG_CS1_MASK 0x001f0001
#define CFG_CS1_CTRL 0x002A3780
#ifdef NANDFLASH_SIZE
#define CFG_CS2_BASE 0x2000
#define CFG_CS2_MASK ((NANDFLASH_SIZE << 20) | 1)
#define CFG_CS2_CTRL 0x00001f60
#endif
#define CONFIG_UDP_CHECKSUM
#endif /* _M5329EVB_H */

View File

@ -27,7 +27,7 @@ LIB = $(obj)lib$(ARCH).a
SOBJS =
COBJS = cache.o traps.o time.o board.o m68k_linux.o
COBJS = cache.o traps.o time.o interrupts.o board.o m68k_linux.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))

View File

@ -221,6 +221,7 @@ static int init_func_i2c (void)
*/
init_fnc_t *init_sequence[] = {
get_clocks,
env_init,
init_baudrate,
serial_init,
@ -371,6 +372,10 @@ board_init_f (ulong bootflag)
*/
bd->bi_memstart = CFG_SDRAM_BASE; /* start of DRAM memory */
bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
#ifdef CFG_INIT_RAM_ADDR
bd->bi_sramstart = CFG_INIT_RAM_ADDR; /* start of SRAM memory */
bd->bi_sramsize = CFG_INIT_RAM_END; /* size of SRAM memory */
#endif
bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */
bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
@ -430,6 +435,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
#endif
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
WATCHDOG_RESET ();
@ -489,7 +498,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
/*
* Setup trap handlers
*/
trap_init (0);
trap_init (CFG_SDRAM_BASE);
#if !defined(CFG_NO_FLASH)
puts ("FLASH: ");
@ -562,12 +571,48 @@ void board_init_r (gd_t *id, ulong dest_addr)
if (s)
s = (*e) ? e + 1 : e;
}
#ifdef CONFIG_HAS_ETH1
/* handle the 2nd ethernet address */
s = getenv ("eth1addr");
for (i = 0; i < 6; ++i) {
bd->bi_enet1addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
if (s)
s = (*e) ? e + 1 : e;
}
#endif
#ifdef CONFIG_HAS_ETH2
/* handle the 3rd ethernet address */
s = getenv ("eth2addr");
for (i = 0; i < 6; ++i) {
bd->bi_enet2addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
if (s)
s = (*e) ? e + 1 : e;
}
#endif
#ifdef CONFIG_HAS_ETH3
/* handle 4th ethernet address */
s = getenv("eth3addr");
for (i = 0; i < 6; ++i) {
bd->bi_enet3addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
if (s)
s = (*e) ? e + 1 : e;
}
#endif
/* IP Address */
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
WATCHDOG_RESET ();
#if defined(CONFIG_PCI)
/*
* Do pci configuration
*/
pci_init ();
#endif
/** leave this here (after malloc(), environment and PCI are working) **/
/* Initialize devices */
@ -640,15 +685,34 @@ void board_init_r (gd_t *id, ulong dest_addr)
nand_init(); /* go init the NAND */
#endif
#if defined(CONFIG_CMD_NET) && defined(FEC_ENET)
#if defined(CONFIG_CMD_NET)
WATCHDOG_RESET();
#if defined(FEC_ENET)
eth_init(bd);
#endif
#if defined(CONFIG_NET_MULTI)
puts ("Net: ");
eth_initialize (bd);
#endif
#endif
#ifdef CONFIG_POST
post_run (NULL, POST_RAM | post_bootmode_get(0));
#endif
#if defined(CONFIG_CMD_PCMCIA) \
&& !defined(CONFIG_CMD_IDE)
WATCHDOG_RESET ();
puts ("PCMCIA:");
pcmcia_init ();
#endif
#if defined(CONFIG_CMD_IDE)
WATCHDOG_RESET ();
puts ("IDE: ");
ide_init ();
#endif
#ifdef CONFIG_LAST_STAGE_INIT
WATCHDOG_RESET ();
/*

117
lib_m68k/interrupts.c Normal file
View File

@ -0,0 +1,117 @@
/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2007 Freescale Semiconductor Inc
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <asm/processor.h>
#include <asm/immap.h>
#define NR_IRQS (CFG_NUM_IRQS)
/*
* Interrupt vector functions.
*/
struct interrupt_action {
interrupt_handler_t *handler;
void *arg;
};
static struct interrupt_action irq_vecs[NR_IRQS];
static __inline__ unsigned short get_sr (void)
{
unsigned short sr;
asm volatile ("move.w %%sr,%0":"=r" (sr):);
return sr;
}
static __inline__ void set_sr (unsigned short sr)
{
asm volatile ("move.w %0,%%sr"::"r" (sr));
}
/************************************************************************/
/*
* Install and free an interrupt handler
*/
void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
{
if ((vec < 0) || (vec > NR_IRQS)) {
printf ("irq_install_handler: wrong interrupt vector %d\n",
vec);
return;
}
irq_vecs[vec].handler = handler;
irq_vecs[vec].arg = arg;
}
void irq_free_handler (int vec)
{
if ((vec < 0) || (vec > NR_IRQS)) {
return;
}
irq_vecs[vec].handler = NULL;
irq_vecs[vec].arg = NULL;
}
void enable_interrupts (void)
{
unsigned short sr;
sr = get_sr ();
set_sr (sr & ~0x0700);
}
int disable_interrupts (void)
{
unsigned short sr;
sr = get_sr ();
set_sr (sr | 0x0700);
return ((sr & 0x0700) == 0); /* return TRUE, if interrupts were enabled before */
}
void int_handler (struct pt_regs *fp)
{
int vec;
vec = (fp->vector >> 2) & 0xff;
if (vec > 0x40)
vec -= 0x40;
else
return;
if (irq_vecs[vec].handler != NULL) {
irq_vecs[vec].handler (irq_vecs[vec].arg);
} else {
printf ("\nBogus External Interrupt Vector %d\n", vec);
}
}

View File

@ -26,6 +26,8 @@
#include <common.h>
#include <asm/mcftimer.h>
#include <asm/timer.h>
#include <asm/immap.h>
#ifdef CONFIG_M5271
#include <asm/m5271.h>
@ -46,13 +48,13 @@
#include <asm/immap_5249.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
static ulong timestamp;
#if defined(CONFIG_M5282) || defined(CONFIG_M5271)
static unsigned short lastinc;
#endif
#if defined(CONFIG_M5272)
/*
* We use timer 3 which is running with a period of 1 us
@ -73,8 +75,10 @@ void udelay(unsigned long usec)
timerp->timer_tmr = MCFTIMER_TMR_DISABLE;
timerp->timer_tcn = 0;
/* set period to 1 us */
timerp->timer_tmr = (((CFG_CLK / 1000000) - 1) << 8) | MCFTIMER_TMR_CLK1 |
MCFTIMER_TMR_FREERUN | MCFTIMER_TMR_ENABLE;
timerp->timer_tmr =
(((CFG_CLK / 1000000) -
1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_FREERUN |
MCFTIMER_TMR_ENABLE;
start = now = timerp->timer_tcn;
while (now < start + tmp)
@ -82,7 +86,8 @@ void udelay(unsigned long usec)
}
}
void mcf_timer_interrupt (void * not_used){
void mcf_timer_interrupt(void *not_used)
{
volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE4);
volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1);
@ -93,10 +98,11 @@ void mcf_timer_interrupt (void * not_used){
/* reset timer */
timerp->timer_ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF;
timestamp ++;
timestamp++;
}
void timer_init (void) {
void timer_init(void)
{
volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE4);
volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1);
@ -106,27 +112,29 @@ void timer_init (void) {
timerp->timer_tmr = MCFTIMER_TMR_DISABLE;
/* initialize and enable timer 4 interrupt */
irq_install_handler (72, mcf_timer_interrupt, 0);
irq_install_handler(72, mcf_timer_interrupt, 0);
intp->int_icr1 |= 0x0000000d;
timerp->timer_tcn = 0;
timerp->timer_trr = 1000; /* Interrupt every ms */
/* set a period of 1us, set timer mode to restart and enable timer and interrupt */
timerp->timer_tmr = (((CFG_CLK / 1000000) - 1) << 8) | MCFTIMER_TMR_CLK1 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE;
timerp->timer_tmr =
(((CFG_CLK / 1000000) -
1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_RESTART |
MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE;
}
void reset_timer (void)
void reset_timer(void)
{
timestamp = 0;
}
ulong get_timer (ulong base)
ulong get_timer(ulong base)
{
return (timestamp - base);
}
void set_timer (ulong t)
void set_timer(ulong t)
{
timestamp = t;
}
@ -139,7 +147,7 @@ void udelay(unsigned long usec)
volatile unsigned short *timerp;
uint tmp;
timerp = (volatile unsigned short *) (CFG_MBAR + MCFTIMER_BASE3);
timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE3);
while (usec > 0) {
if (usec > 65000)
@ -154,21 +162,21 @@ void udelay(unsigned long usec)
/* set period to 1 us */
timerp[MCFTIMER_PCSR] =
#ifdef CONFIG_M5271
(6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
#else /* !CONFIG_M5271 */
(5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
#endif /* CONFIG_M5271 */
(6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
#else /* !CONFIG_M5271 */
(5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
#endif /* CONFIG_M5271 */
timerp[MCFTIMER_PMR] = tmp;
while (timerp[MCFTIMER_PCNTR] > 0);
while (timerp[MCFTIMER_PCNTR] > 0) ;
}
}
void timer_init (void)
void timer_init(void)
{
volatile unsigned short *timerp;
timerp = (volatile unsigned short *) (CFG_MBAR + MCFTIMER_BASE4);
timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE4);
timestamp = 0;
/* Set up TIMER 4 as poll clock */
@ -176,27 +184,27 @@ void timer_init (void)
timerp[MCFTIMER_PMR] = lastinc = 0;
timerp[MCFTIMER_PCSR] =
#ifdef CONFIG_M5271
(6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
#else /* !CONFIG_M5271 */
(5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
#endif /* CONFIG_M5271 */
(6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
#else /* !CONFIG_M5271 */
(5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
#endif /* CONFIG_M5271 */
}
void set_timer (ulong t)
void set_timer(ulong t)
{
volatile unsigned short *timerp;
timerp = (volatile unsigned short *) (CFG_MBAR + MCFTIMER_BASE4);
timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE4);
timestamp = 0;
timerp[MCFTIMER_PMR] = lastinc = 0;
}
ulong get_timer (ulong base)
ulong get_timer(ulong base)
{
unsigned short now, diff;
volatile unsigned short *timerp;
timerp = (volatile unsigned short *) (CFG_MBAR + MCFTIMER_BASE4);
timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE4);
now = timerp[MCFTIMER_PCNTR];
diff = -(now - lastinc);
@ -205,14 +213,13 @@ ulong get_timer (ulong base)
return timestamp - base;
}
void wait_ticks (unsigned long ticks)
void wait_ticks(unsigned long ticks)
{
set_timer (0);
while (get_timer (0) < ticks);
set_timer(0);
while (get_timer(0) < ticks) ;
}
#endif
#if defined(CONFIG_M5249)
/*
* We use timer 1 which is running with a period of 1 us
@ -234,8 +241,10 @@ void udelay(unsigned long usec)
timerp->timer_tcn = 0;
/* set period to 1 us */
/* on m5249 the system clock is (cpu_clk / 2) -> divide by 2000000 */
timerp->timer_tmr = (((CFG_CLK / 2000000) - 1) << 8) | MCFTIMER_TMR_CLK1 |
MCFTIMER_TMR_FREERUN | MCFTIMER_TMR_ENABLE;
timerp->timer_tmr =
(((CFG_CLK / 2000000) -
1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_FREERUN |
MCFTIMER_TMR_ENABLE;
start = now = timerp->timer_tcn;
while (now < start + tmp)
@ -243,7 +252,8 @@ void udelay(unsigned long usec)
}
}
void mcf_timer_interrupt (void * not_used){
void mcf_timer_interrupt(void *not_used)
{
volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE2);
/* check for timer 2 interrupts */
@ -253,10 +263,11 @@ void mcf_timer_interrupt (void * not_used){
/* reset timer */
timerp->timer_ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF;
timestamp ++;
timestamp++;
}
void timer_init (void) {
void timer_init(void)
{
volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE2);
timestamp = 0;
@ -265,34 +276,196 @@ void timer_init (void) {
timerp->timer_tmr = MCFTIMER_TMR_DISABLE;
/* initialize and enable timer 2 interrupt */
irq_install_handler (31, mcf_timer_interrupt, 0);
irq_install_handler(31, mcf_timer_interrupt, 0);
mbar_writeLong(MCFSIM_IMR, mbar_readLong(MCFSIM_IMR) & ~0x00000400);
mbar_writeByte(MCFSIM_TIMER2ICR, MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3);
mbar_writeByte(MCFSIM_TIMER2ICR,
MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 |
MCFSIM_ICR_PRI3);
timerp->timer_tcn = 0;
timerp->timer_trr = 1000; /* Interrupt every ms */
/* set a period of 1us, set timer mode to restart and enable timer and interrupt */
/* on m5249 the system clock is (cpu_clk / 2) -> divide by 2000000 */
timerp->timer_tmr = (((CFG_CLK / 2000000) - 1) << 8) | MCFTIMER_TMR_CLK1 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE;
timerp->timer_tmr =
(((CFG_CLK / 2000000) -
1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_RESTART |
MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE;
}
void reset_timer (void)
void reset_timer(void)
{
timestamp = 0;
}
ulong get_timer (ulong base)
ulong get_timer(ulong base)
{
return (timestamp - base);
}
void set_timer (ulong t)
void set_timer(ulong t)
{
timestamp = t;
}
#endif
#if defined(CONFIG_MCFTMR)
#ifndef CFG_UDELAY_BASE
# error "uDelay base not defined!"
#endif
#if !defined(CFG_TMR_BASE) || !defined(CFG_INTR_BASE) || !defined(CFG_TMRINTR_NO) || !defined(CFG_TMRINTR_MASK)
# error "TMR_BASE, INTR_BASE, TMRINTR_NO or TMRINTR_MASk not defined!"
#endif
extern void dtimer_intr_setup(void);
void udelay(unsigned long usec)
{
volatile dtmr_t *timerp = (dtmr_t *) (CFG_UDELAY_BASE);
uint start, now, tmp;
while (usec > 0) {
if (usec > 65000)
tmp = 65000;
else
tmp = usec;
usec = usec - tmp;
/* Set up TIMER 3 as timebase clock */
timerp->tmr = DTIM_DTMR_RST_RST;
timerp->tcn = 0;
/* set period to 1 us */
timerp->tmr =
CFG_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 | DTIM_DTMR_FRR |
DTIM_DTMR_RST_EN;
start = now = timerp->tcn;
while (now < start + tmp)
now = timerp->tcn;
}
}
void dtimer_interrupt(void *not_used)
{
volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE);
volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
/* check for timer interrupt asserted */
if ((intp->iprh0 & CFG_TMRINTR_MASK) == CFG_TMRINTR_MASK) {
timerp->ter = (DTIM_DTER_CAP | DTIM_DTER_REF);
timestamp++;
return;
}
}
void timer_init(void)
{
volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE);
timestamp = 0;
timerp->tcn = 0;
timerp->trr = 0;
/* Set up TIMER 4 as clock */
timerp->tmr = DTIM_DTMR_RST_RST;
/* initialize and enable timer interrupt */
irq_install_handler(CFG_TMRINTR_NO, dtimer_interrupt, 0);
timerp->tcn = 0;
timerp->trr = 1000; /* Interrupt every ms */
dtimer_intr_setup();
/* set a period of 1us, set timer mode to restart and enable timer and interrupt */
timerp->tmr = CFG_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 |
DTIM_DTMR_FRR | DTIM_DTMR_ORRI | DTIM_DTMR_RST_EN;
}
void reset_timer(void)
{
timestamp = 0;
}
ulong get_timer(ulong base)
{
return (timestamp - base);
}
void set_timer(ulong t)
{
timestamp = t;
}
#endif /* CONFIG_MCFTMR */
#if defined(CONFIG_MCFPIT)
#if !defined(CFG_PIT_BASE)
# error "CFG_PIT_BASE not defined!"
#endif
static unsigned short lastinc;
void udelay(unsigned long usec)
{
volatile pit_t *timerp = (pit_t *) (CFG_UDELAY_BASE);
uint tmp;
while (usec > 0) {
if (usec > 65000)
tmp = 65000;
else
tmp = usec;
usec = usec - tmp;
/* Set up TIMER 3 as timebase clock */
timerp->pcsr = PIT_PCSR_OVW;
timerp->pmr = 0;
/* set period to 1 us */
timerp->pcsr |= PIT_PCSR_PRE(CFG_PIT_PRESCALE) | PIT_PCSR_EN;
timerp->pmr = tmp;
while (timerp->pcntr > 0) ;
}
}
void timer_init(void)
{
volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE);
timestamp = 0;
/* Set up TIMER 4 as poll clock */
timerp->pcsr = PIT_PCSR_OVW;
timerp->pmr = lastinc = 0;
timerp->pcsr |= PIT_PCSR_PRE(CFG_PIT_PRESCALE) | PIT_PCSR_EN;
}
void set_timer(ulong t)
{
volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE);
timestamp = 0;
timerp->pmr = lastinc = 0;
}
ulong get_timer(ulong base)
{
unsigned short now, diff;
volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE);
now = timerp->pcntr;
diff = -(now - lastinc);
timestamp += diff;
lastinc = now;
return timestamp - base;
}
void wait_ticks(unsigned long ticks)
{
set_timer(0);
while (get_timer(0) < ticks) ;
}
#endif /* CONFIG_MCFPIT */
/*
* This function is derived from PowerPC code (read timebase as long long).
@ -307,7 +480,7 @@ unsigned long long get_ticks(void)
* This function is derived from PowerPC code (timebase clock frequency).
* On M68K it returns the number of timer ticks per second.
*/
ulong get_tbclk (void)
ulong get_tbclk(void)
{
ulong tbclk;
tbclk = CFG_HZ;

View File

@ -59,6 +59,7 @@ extern int npe_initialize(bd_t *);
extern int uec_initialize(int);
extern int bfin_EMAC_initialize(bd_t *);
extern int atstk1000_eth_initialize(bd_t *);
extern int mcffec_initialize(bd_t*);
static struct eth_device *eth_devices, *eth_current;
@ -249,6 +250,9 @@ int eth_initialize(bd_t *bis)
#if defined(CONFIG_ATSTK1000)
atstk1000_eth_initialize(bis);
#endif
#if defined(CONFIG_MCFFEC)
mcffec_initialize(bis);
#endif
if (!eth_devices) {
puts ("No ethernet found.\n");

View File

@ -31,7 +31,8 @@ COBJS = date.o \
bf5xx_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \
ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o ds3231.o \
m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \
mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o
mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o \
mcfrtc.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))

121
rtc/mcfrtc.c Normal file
View File

@ -0,0 +1,121 @@
/*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <rtc.h>
#include <asm/immap.h>
#include <asm/rtc.h>
#if defined(CONFIG_MCFRTC) && (CONFIG_COMMANDS & CFG_CMD_DATE)
#undef RTC_DEBUG
#ifndef CFG_MCFRTC_BASE
#error RTC_BASE is not defined!
#endif
#define isleap(y) ((((y) % 4) == 0 && ((y) % 100) != 0) || ((y) % 400) == 0)
#define STARTOFTIME 1970
void rtc_get(struct rtc_time *tmp)
{
volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
int rtc_days, rtc_hrs, rtc_mins;
int tim;
rtc_days = rtc->days;
rtc_hrs = rtc->hourmin >> 8;
rtc_mins = RTC_HOURMIN_MINUTES(rtc->hourmin);
tim = (rtc_days * 24) + rtc_hrs;
tim = (tim * 60) + rtc_mins;
tim = (tim * 60) + rtc->seconds;
to_tm(tim, tmp);
tmp->tm_yday = 0;
tmp->tm_isdst = 0;
#ifdef RTC_DEBUG
printf("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
#endif
}
void rtc_set(struct rtc_time *tmp)
{
volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
static int month_days[12] = {
31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
};
int days, i, months;
if (tmp->tm_year > 2037) {
printf("Unable to handle. Exceeding integer limitation!\n");
tmp->tm_year = 2027;
}
#ifdef RTC_DEBUG
printf("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
#endif
/* calculate days by years */
for (i = STARTOFTIME, days = 0; i < tmp->tm_year; i++) {
days += 365 + isleap(i);
}
/* calculate days by months */
months = tmp->tm_mon - 1;
for (i = 0; i < months; i++) {
days += month_days[i];
if (i == 1)
days += isleap(i);
}
days += tmp->tm_mday - 1;
rtc->days = days;
rtc->hourmin = (tmp->tm_hour << 8) | tmp->tm_min;
rtc->seconds = tmp->tm_sec;
}
void rtc_reset(void)
{
volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
if ((rtc->cr & RTC_CR_EN) == 0) {
printf("real-time-clock was stopped. Now starting...\n");
rtc->cr |= RTC_CR_EN;
}
rtc->cr |= RTC_CR_SWR;
}
#endif /* CONFIG_MCFRTC && CFG_CMD_DATE */