drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This commit is contained in:
Jean-Christophe PLAGNIOL-VILLARD 2008-08-02 23:48:30 +02:00 committed by Wolfgang Denk
parent 4cd7e6528f
commit 81091f58f0
7 changed files with 6 additions and 29 deletions

View File

@ -25,18 +25,18 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libserial.a
COBJS-y += atmel_usart.o
COBJS-y += mcfuart.o
COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o
COBJS-$(CONFIG_MCFUART) += mcfuart.o
COBJS-y += ns9750_serial.o
COBJS-y += ns16550.o
COBJS-y += s3c4510b_uart.o
COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
COBJS-y += serial.o
COBJS-y += serial_max3100.o
COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
COBJS-y += serial_pl010.o
COBJS-y += serial_pl011.o
COBJS-y += serial_xuartlite.o
COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
COBJS-y += serial_sh.o
COBJS-y += usbtty.o
COBJS-$(CONFIG_USB_TTY) += usbtty.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)

View File

@ -17,7 +17,6 @@
*/
#include <common.h>
#ifdef CONFIG_ATMEL_USART
#include <asm/io.h>
#include <asm/arch/clk.h>
#include <asm/arch/memory-map.h>
@ -96,5 +95,3 @@ int serial_tstc(void)
{
return (usart3_readl(CSR) & USART3_BIT(RXRDY)) != 0;
}
#endif /* CONFIG_ATMEL_USART */

View File

@ -29,8 +29,6 @@
#include <common.h>
#ifdef CONFIG_MCFUART
#include <asm/immap.h>
#include <asm/uart.h>
@ -130,4 +128,3 @@ void serial_setbrg(void)
uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED;
}
#endif /* CONFIG_MCFUART */

View File

@ -45,8 +45,6 @@
#include <common.h>
#ifdef CONFIG_DRIVER_S3C4510_UART
#include <asm/hardware.h>
#include "s3c4510b_uart.h"
@ -212,5 +210,3 @@ void serial_puts (const char *s)
uart->m_ctrl.bf.sendBreak = 0;
}
#endif

View File

@ -26,8 +26,6 @@
#include <common.h>
#include <watchdog.h>
#ifdef CONFIG_MAX3100_SERIAL
DECLARE_GLOBAL_DATA_PTR;
/**************************************************************/
@ -298,5 +296,3 @@ int serial_tstc(void)
void serial_setbrg(void)
{
}
#endif

View File

@ -27,8 +27,6 @@
#include <config.h>
#include <asm/io.h>
#ifdef CONFIG_XILINX_UARTLITE
#define RX_FIFO_OFFSET 0 /* receive FIFO, read only */
#define TX_FIFO_OFFSET 4 /* transmit FIFO, write only */
#define STATUS_REG_OFFSET 8 /* status register, read only */
@ -77,5 +75,3 @@ int serial_tstc(void)
{
return (in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA);
}
#endif /* CONFIG_MICROBLZE */

View File

@ -23,8 +23,6 @@
#include <common.h>
#ifdef CONFIG_USB_TTY
#include <circbuf.h>
#include <devices.h>
#include "usbtty.h"
@ -1007,6 +1005,3 @@ void usbtty_poll (void)
udc_irq();
}
#endif