Add support for IDS "NC650" board
This commit is contained in:
wdenk
parent
31a649234e
commit
7ca202f566
|
|
@ -2,6 +2,8 @@
|
|||
Changes since U-Boot 1.1.1:
|
||||
======================================================================
|
||||
|
||||
* Add support for IDS "NC650" board
|
||||
|
||||
* Add automatic update support for LWMON board
|
||||
|
||||
* Clear Block Lock-Bits when erasing flash on LWMON board.
|
||||
|
|
@ -16,7 +18,7 @@ Changes since U-Boot 1.1.1:
|
|||
* Patch by Mark Jonas, 13 July 2004:
|
||||
- Total5200 LCD now run in little endian mode. Endianess conversion
|
||||
is done in hardware.
|
||||
- Removed last reference to "console" environment variable.
|
||||
- Removed last reference to "console" environment variable.
|
||||
|
||||
* Patches by Lars Munch, 12 Jul 2004:
|
||||
- move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
|
||||
|
|
|
|||
|
|
@ -58,13 +58,14 @@ Torsten Demke <torsten.demke@fci.com>
|
|||
|
||||
Wolfgang Denk <wd@denx.de>
|
||||
|
||||
IceCube_5100 MGT5100
|
||||
IceCube_5200 MPC5200
|
||||
|
||||
AMX860 MPC860
|
||||
ETX094 MPC850
|
||||
FPS850L MPC850
|
||||
FPS860L MPC860
|
||||
ICU862 MPC862
|
||||
IceCube_5100 MGT5100
|
||||
IceCube_5200 MPC5200
|
||||
IP860 MPC860
|
||||
IVML24 MPC860
|
||||
IVML24_128 MPC860
|
||||
|
|
@ -74,6 +75,7 @@ Wolfgang Denk <wd@denx.de>
|
|||
IVMS8_256 MPC860
|
||||
LANTEC MPC850
|
||||
LWMON MPC823
|
||||
NC650 MPC852
|
||||
R360MPI MPC823
|
||||
RMU MPC850
|
||||
RRvision MPC823
|
||||
|
|
|
|||
3
Makefile
3
Makefile
|
|
@ -532,6 +532,9 @@ NETTA2_config: unconfig
|
|||
}
|
||||
@./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
|
||||
|
||||
NC650_config: unconfig
|
||||
@./mkconfig $(@:_config=) ppc mpc8xx nc650
|
||||
|
||||
NX823_config: unconfig
|
||||
@./mkconfig $(@:_config=) ppc mpc8xx nx823
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,40 @@
|
|||
#
|
||||
# (C) Copyright 2004
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = lib$(BOARD).a
|
||||
|
||||
OBJS = $(BOARD).o flash.o
|
||||
|
||||
$(LIB): .depend $(OBJS)
|
||||
$(AR) crv $@ $(OBJS)
|
||||
|
||||
#########################################################################
|
||||
|
||||
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
|
||||
$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
|
||||
|
||||
sinclude .depend
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
#
|
||||
# (C) Copyright 2004
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
#
|
||||
# NC650 board
|
||||
#
|
||||
|
||||
TEXT_BASE = 0x40700000
|
||||
|
|
@ -0,0 +1,542 @@
|
|||
/*
|
||||
* (C) Copyright 2004
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* (C) Copyright 2001
|
||||
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
||||
*
|
||||
* (C) Copyright 2001
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#undef DEBUG
|
||||
|
||||
#include <common.h>
|
||||
#include <mpc8xx.h>
|
||||
|
||||
#ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
|
||||
#define CFG_OR_TIMING_FLASH_AT_50MHZ (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
|
||||
OR_SCY_2_CLK | OR_EHTR | OR_BI)
|
||||
#endif
|
||||
|
||||
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
||||
|
||||
#if defined(CFG_ENV_IS_IN_FLASH)
|
||||
# ifndef CFG_ENV_ADDR
|
||||
# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
|
||||
# endif
|
||||
# ifndef CFG_ENV_SIZE
|
||||
# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
|
||||
# endif
|
||||
# ifndef CFG_ENV_SECT_SIZE
|
||||
# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Protection Flags:
|
||||
*/
|
||||
#define FLAG_PROTECT_SET 0x01
|
||||
#define FLAG_PROTECT_CLEAR 0x02
|
||||
|
||||
/* Board support for 1 or 2 flash devices */
|
||||
#undef FLASH_PORT_WIDTH32
|
||||
#undef FLASH_PORT_WIDTH16
|
||||
#define FLASH_PORT_WIDTH8
|
||||
|
||||
#ifdef FLASH_PORT_WIDTH16
|
||||
#define FLASH_PORT_WIDTH ushort
|
||||
#define FLASH_PORT_WIDTHV vu_short
|
||||
#elif FLASH_PORT_WIDTH32
|
||||
#define FLASH_PORT_WIDTH ulong
|
||||
#define FLASH_PORT_WIDTHV vu_long
|
||||
#else /* FLASH_PORT_WIDTH8 */
|
||||
#define FLASH_PORT_WIDTH uchar
|
||||
#define FLASH_PORT_WIDTHV vu_char
|
||||
#endif
|
||||
|
||||
#define FPW FLASH_PORT_WIDTH
|
||||
#define FPWV FLASH_PORT_WIDTHV
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Functions
|
||||
*/
|
||||
static ulong flash_get_size (FPWV * addr, flash_info_t * info);
|
||||
static int write_data (flash_info_t * info, ulong dest, FPW data);
|
||||
static void flash_get_offsets (ulong base, flash_info_t * info);
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
unsigned long flash_init (void)
|
||||
{
|
||||
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
||||
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
||||
unsigned long size_b0;
|
||||
int i;
|
||||
#ifdef CFG_OR_TIMING_FLASH_AT_50MHZ
|
||||
int scy, trlx, flash_or_timing, clk_diff;
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
|
||||
if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
|
||||
trlx = OR_TRLX;
|
||||
scy *= 2;
|
||||
} else
|
||||
trlx = 0;
|
||||
|
||||
/* We assume that each 10MHz of bus clock require 1-clk SCY
|
||||
* adjustment.
|
||||
*/
|
||||
clk_diff = (gd->bus_clk / 1000000) - 50;
|
||||
|
||||
/* We need proper rounding here. This is what the "+5" and "-5"
|
||||
* are here for.
|
||||
*/
|
||||
if (clk_diff >= 0)
|
||||
scy += (clk_diff + 5) / 10;
|
||||
else
|
||||
scy += (clk_diff - 5) / 10;
|
||||
|
||||
/* For bus frequencies above 50MHz, we want to use relaxed
|
||||
* timing (OR_TRLX).
|
||||
*/
|
||||
if (gd->bus_clk >= 50000000)
|
||||
trlx = OR_TRLX;
|
||||
else
|
||||
trlx = 0;
|
||||
|
||||
if (trlx)
|
||||
scy /= 2;
|
||||
|
||||
if (scy > 0xf)
|
||||
scy = 0xf;
|
||||
if (scy < 1)
|
||||
scy = 1;
|
||||
|
||||
flash_or_timing = (scy << 4) | trlx |
|
||||
(CFG_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK));
|
||||
#endif
|
||||
|
||||
/* Init: no FLASHes known */
|
||||
for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
|
||||
flash_info[i].flash_id = FLASH_UNKNOWN;
|
||||
}
|
||||
|
||||
/* Static FLASH Bank configuration here - FIXME XXX */
|
||||
size_b0 = flash_get_size ((FPW *) FLASH_BASE0_PRELIM, &flash_info[0]);
|
||||
|
||||
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
|
||||
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
|
||||
size_b0, size_b0 << 20);
|
||||
}
|
||||
|
||||
/* Remap FLASH according to real size */
|
||||
#ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
|
||||
memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
|
||||
#else
|
||||
memctl->memc_or0 = flash_or_timing | (-size_b0 & OR_AM_MSK);
|
||||
#endif
|
||||
memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_8 | BR_MS_GPCM | BR_V;
|
||||
|
||||
/* Re-do sizing to get full correct info */
|
||||
size_b0 = flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[0]);
|
||||
|
||||
flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
|
||||
|
||||
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
|
||||
/* monitor protection ON by default */
|
||||
(void) flash_protect (FLAG_PROTECT_SET,
|
||||
CFG_MONITOR_BASE,
|
||||
CFG_MONITOR_BASE + monitor_flash_len - 1,
|
||||
&flash_info[0]);
|
||||
#endif
|
||||
|
||||
#ifdef CFG_ENV_IS_IN_FLASH
|
||||
/* ENV protection ON by default */
|
||||
flash_protect (FLAG_PROTECT_SET,
|
||||
CFG_ENV_ADDR,
|
||||
CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
|
||||
&flash_info[0]);
|
||||
#endif
|
||||
|
||||
flash_info[0].size = size_b0;
|
||||
|
||||
return (size_b0);
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
static void flash_get_offsets (ulong base, flash_info_t * info)
|
||||
{
|
||||
int i;
|
||||
|
||||
if (info->flash_id == FLASH_UNKNOWN) {
|
||||
return;
|
||||
}
|
||||
|
||||
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
|
||||
for (i = 0; i < info->sector_count; i++) {
|
||||
info->start[i] = base + (i * 0x00020000);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
void flash_print_info (flash_info_t * info)
|
||||
{
|
||||
int i;
|
||||
|
||||
if (info->flash_id == FLASH_UNKNOWN) {
|
||||
printf ("missing or unknown FLASH type\n");
|
||||
return;
|
||||
}
|
||||
|
||||
switch (info->flash_id & FLASH_VENDMASK) {
|
||||
case FLASH_MAN_INTEL:
|
||||
printf ("INTEL ");
|
||||
break;
|
||||
default:
|
||||
printf ("Unknown Vendor ");
|
||||
break;
|
||||
}
|
||||
|
||||
switch (info->flash_id & FLASH_TYPEMASK) {
|
||||
case FLASH_28F320J3A:
|
||||
printf ("28F320J3A\n");
|
||||
break;
|
||||
case FLASH_28F640J3A:
|
||||
printf ("28F640J3A\n");
|
||||
break;
|
||||
case FLASH_28F128J3A:
|
||||
printf ("28F128J3A\n");
|
||||
break;
|
||||
default:
|
||||
printf ("Unknown Chip Type\n");
|
||||
break;
|
||||
}
|
||||
|
||||
printf (" Size: %ld MB in %d Sectors\n",
|
||||
info->size >> 20, info->sector_count);
|
||||
|
||||
printf (" Sector Start Addresses:");
|
||||
for (i = 0; i < info->sector_count; ++i) {
|
||||
if ((i % 5) == 0)
|
||||
printf ("\n ");
|
||||
printf (" %08lX%s",
|
||||
info->start[i],
|
||||
info->protect[i] ? " (RO)" : " ");
|
||||
}
|
||||
printf ("\n");
|
||||
return;
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/*
|
||||
* The following code cannot be run from FLASH!
|
||||
*/
|
||||
|
||||
static ulong flash_get_size (FPWV * addr, flash_info_t * info)
|
||||
{
|
||||
FPW value;
|
||||
|
||||
addr[0] = (FPW) 0x00900090;
|
||||
|
||||
value = addr[0];
|
||||
|
||||
debug ("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
|
||||
|
||||
switch (value) {
|
||||
case (FPW) INTEL_MANUFACT:
|
||||
info->flash_id = FLASH_MAN_INTEL;
|
||||
break;
|
||||
default:
|
||||
info->flash_id = FLASH_UNKNOWN;
|
||||
info->sector_count = 0;
|
||||
info->size = 0;
|
||||
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
|
||||
return (0); /* no or unknown flash */
|
||||
}
|
||||
|
||||
#ifdef FLASH_PORT_WIDTH8
|
||||
value = addr[2]; /* device ID */
|
||||
#else
|
||||
value = addr[1]; /* device ID */
|
||||
#endif
|
||||
|
||||
debug ("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
|
||||
|
||||
switch (value) {
|
||||
case (FPW) INTEL_ID_28F320J3A:
|
||||
info->flash_id += FLASH_28F320J3A;
|
||||
info->sector_count = 32;
|
||||
info->size = 0x00400000;
|
||||
break; /* => 4 MB */
|
||||
|
||||
case (FPW) INTEL_ID_28F640J3A:
|
||||
info->flash_id += FLASH_28F640J3A;
|
||||
info->sector_count = 64;
|
||||
info->size = 0x00800000;
|
||||
break; /* => 8 MB */
|
||||
|
||||
case (FPW) INTEL_ID_28F128J3A:
|
||||
info->flash_id += FLASH_28F128J3A;
|
||||
info->sector_count = 128;
|
||||
info->size = 0x01000000;
|
||||
break; /* => 16 MB */
|
||||
|
||||
default:
|
||||
info->flash_id = FLASH_UNKNOWN;
|
||||
break;
|
||||
}
|
||||
|
||||
if (info->sector_count > CFG_MAX_FLASH_SECT) {
|
||||
printf ("** ERROR: sector count %d > max (%d) **\n",
|
||||
info->sector_count, CFG_MAX_FLASH_SECT);
|
||||
info->sector_count = CFG_MAX_FLASH_SECT;
|
||||
}
|
||||
|
||||
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
|
||||
|
||||
return (info->size);
|
||||
}
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
int flash_erase (flash_info_t * info, int s_first, int s_last)
|
||||
{
|
||||
int flag, prot, sect;
|
||||
ulong type, start, now, last;
|
||||
int rcode = 0;
|
||||
|
||||
if ((s_first < 0) || (s_first > s_last)) {
|
||||
if (info->flash_id == FLASH_UNKNOWN) {
|
||||
printf ("- missing\n");
|
||||
} else {
|
||||
printf ("- no sectors to erase\n");
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
type = (info->flash_id & FLASH_VENDMASK);
|
||||
if ((type != FLASH_MAN_INTEL)) {
|
||||
printf ("Can't erase unknown flash type %08lx - aborted\n",
|
||||
info->flash_id);
|
||||
return 1;
|
||||
}
|
||||
|
||||
prot = 0;
|
||||
for (sect = s_first; sect <= s_last; ++sect) {
|
||||
if (info->protect[sect]) {
|
||||
prot++;
|
||||
}
|
||||
}
|
||||
|
||||
if (prot) {
|
||||
printf ("- Warning: %d protected sectors will not be erased!\n",
|
||||
prot);
|
||||
} else {
|
||||
printf ("\n");
|
||||
}
|
||||
|
||||
start = get_timer (0);
|
||||
last = start;
|
||||
/* Start erase on unprotected sectors */
|
||||
for (sect = s_first; sect <= s_last; sect++) {
|
||||
if (info->protect[sect] == 0) { /* not protected */
|
||||
FPWV *addr = (FPWV *) (info->start[sect]);
|
||||
FPW status;
|
||||
|
||||
/* Disable interrupts which might cause a timeout here */
|
||||
flag = disable_interrupts ();
|
||||
|
||||
*addr = (FPW) 0x00500050; /* clear status register */
|
||||
*addr = (FPW) 0x00200020; /* erase setup */
|
||||
*addr = (FPW) 0x00D000D0; /* erase confirm */
|
||||
|
||||
/* re-enable interrupts if necessary */
|
||||
if (flag)
|
||||
enable_interrupts ();
|
||||
|
||||
/* wait at least 80us - let's wait 1 ms */
|
||||
udelay (1000);
|
||||
|
||||
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
|
||||
if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
|
||||
printf ("Timeout\n");
|
||||
*addr = (FPW) 0x00B000B0; /* suspend erase */
|
||||
*addr = (FPW) 0x00FF00FF; /* reset to read mode */
|
||||
rcode = 1;
|
||||
break;
|
||||
}
|
||||
|
||||
/* show that we're waiting */
|
||||
if ((now - last) > 1000) { /* every second */
|
||||
putc ('.');
|
||||
last = now;
|
||||
}
|
||||
}
|
||||
|
||||
*addr = (FPW) 0x00FF00FF; /* reset to read mode */
|
||||
}
|
||||
}
|
||||
printf (" done\n");
|
||||
return rcode;
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Copy memory to flash, returns:
|
||||
* 0 - OK
|
||||
* 1 - write timeout
|
||||
* 2 - Flash not erased
|
||||
* 4 - Flash not identified
|
||||
*/
|
||||
|
||||
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
||||
{
|
||||
ulong cp, wp;
|
||||
FPW data;
|
||||
|
||||
int i, l, rc, port_width;
|
||||
|
||||
if (info->flash_id == FLASH_UNKNOWN) {
|
||||
return 4;
|
||||
}
|
||||
/* get lower word aligned address */
|
||||
#ifdef FLASH_PORT_WIDTH16
|
||||
wp = (addr & ~1);
|
||||
port_width = 2;
|
||||
#elif defined(FLASH_PORT_WIDTH32)
|
||||
wp = (addr & ~3);
|
||||
port_width = 4;
|
||||
#else
|
||||
wp = addr;
|
||||
port_width = 1;
|
||||
#endif
|
||||
|
||||
/*
|
||||
* handle unaligned start bytes
|
||||
*/
|
||||
if ((l = addr - wp) != 0) {
|
||||
data = 0;
|
||||
for (i = 0, cp = wp; i < l; ++i, ++cp) {
|
||||
data = (data << 8) | (*(uchar *) cp);
|
||||
}
|
||||
for (; i < port_width && cnt > 0; ++i) {
|
||||
data = (data << 8) | *src++;
|
||||
--cnt;
|
||||
++cp;
|
||||
}
|
||||
for (; cnt == 0 && i < port_width; ++i, ++cp) {
|
||||
data = (data << 8) | (*(uchar *) cp);
|
||||
}
|
||||
|
||||
if ((rc = write_data (info, wp, data)) != 0) {
|
||||
return (rc);
|
||||
}
|
||||
wp += port_width;
|
||||
}
|
||||
|
||||
/*
|
||||
* handle word aligned part
|
||||
*/
|
||||
while (cnt >= port_width) {
|
||||
data = 0;
|
||||
for (i = 0; i < port_width; ++i) {
|
||||
data = (data << 8) | *src++;
|
||||
}
|
||||
if ((rc = write_data (info, wp, data)) != 0) {
|
||||
return (rc);
|
||||
}
|
||||
wp += port_width;
|
||||
cnt -= port_width;
|
||||
}
|
||||
|
||||
if (cnt == 0) {
|
||||
return (0);
|
||||
}
|
||||
|
||||
/*
|
||||
* handle unaligned tail bytes
|
||||
*/
|
||||
data = 0;
|
||||
for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
|
||||
data = (data << 8) | *src++;
|
||||
--cnt;
|
||||
}
|
||||
for (; i < port_width; ++i, ++cp) {
|
||||
data = (data << 8) | (*(uchar *) cp);
|
||||
}
|
||||
|
||||
return (write_data (info, wp, data));
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Write a word or halfword to Flash, returns:
|
||||
* 0 - OK
|
||||
* 1 - write timeout
|
||||
* 2 - Flash not erased
|
||||
*/
|
||||
static int write_data (flash_info_t * info, ulong dest, FPW data)
|
||||
{
|
||||
FPWV *addr = (FPWV *) dest;
|
||||
ulong status;
|
||||
ulong start;
|
||||
int flag;
|
||||
|
||||
/* Check if Flash is (sufficiently) erased */
|
||||
if ((*addr & data) != data) {
|
||||
printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
|
||||
return (2);
|
||||
}
|
||||
/* Disable interrupts which might cause a timeout here */
|
||||
flag = disable_interrupts ();
|
||||
|
||||
*addr = (FPW) 0x00400040; /* write setup */
|
||||
*addr = data;
|
||||
|
||||
/* re-enable interrupts if necessary */
|
||||
if (flag)
|
||||
enable_interrupts ();
|
||||
|
||||
start = get_timer (0);
|
||||
|
||||
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
|
||||
if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
|
||||
*addr = (FPW) 0x00FF00FF; /* restore read mode */
|
||||
return (1);
|
||||
}
|
||||
}
|
||||
|
||||
*addr = (FPW) 0x00FF00FF; /* restore read mode */
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
|
@ -0,0 +1,207 @@
|
|||
/*
|
||||
* (C) Copyright 2001
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <config.h>
|
||||
#include <mpc8xx.h>
|
||||
|
||||
/*
|
||||
* Memory Controller Using
|
||||
*
|
||||
* CS0 - Flash memory (0x40000000)
|
||||
* CS3 - SDRAM (0x00000000}
|
||||
*/
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
#define _not_used_ 0xffffffff
|
||||
|
||||
const uint sdram_table[] = {
|
||||
/* single read. (offset 0 in upm RAM) */
|
||||
0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
|
||||
0x1ff77c47,
|
||||
|
||||
/* MRS initialization (offset 5) */
|
||||
|
||||
0x1ff77c34, 0xefeabc34, 0x1fb57c35,
|
||||
|
||||
/* burst read. (offset 8 in upm RAM) */
|
||||
0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
|
||||
0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
|
||||
_not_used_, _not_used_, _not_used_, _not_used_,
|
||||
_not_used_, _not_used_, _not_used_, _not_used_,
|
||||
|
||||
/* single write. (offset 18 in upm RAM) */
|
||||
0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
|
||||
_not_used_, _not_used_, _not_used_, _not_used_,
|
||||
|
||||
/* burst write. (offset 20 in upm RAM) */
|
||||
0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
|
||||
0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
|
||||
_not_used_, _not_used_, _not_used_, _not_used_,
|
||||
_not_used_, _not_used_, _not_used_, _not_used_,
|
||||
|
||||
/* refresh. (offset 30 in upm RAM) */
|
||||
0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
|
||||
0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
|
||||
_not_used_, _not_used_, _not_used_, _not_used_,
|
||||
|
||||
/* exception. (offset 3c in upm RAM) */
|
||||
0x7ffffc07, _not_used_, _not_used_, _not_used_
|
||||
};
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
/*
|
||||
* Check Board Identity:
|
||||
*/
|
||||
|
||||
int checkboard (void)
|
||||
{
|
||||
puts ("Board: NC650\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
static long int dram_size (long int, long int *, long int);
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
long int initdram (int board_type)
|
||||
{
|
||||
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
||||
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
||||
long int size8, size9;
|
||||
long int size_b0 = 0;
|
||||
unsigned long reg;
|
||||
|
||||
upmconfig (UPMA, (uint *) sdram_table,
|
||||
sizeof (sdram_table) / sizeof (uint));
|
||||
|
||||
/*
|
||||
* Preliminary prescaler for refresh (depends on number of
|
||||
* banks): This value is selected for four cycles every 62.4 us
|
||||
* with two SDRAM banks or four cycles every 31.2 us with one
|
||||
* bank. It will be adjusted after memory sizing.
|
||||
*/
|
||||
memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
|
||||
|
||||
memctl->memc_mar = 0x00000088;
|
||||
|
||||
/*
|
||||
* Map controller bank 1 to the SDRAM bank at
|
||||
* preliminary address - these have to be modified after the
|
||||
* SDRAM size has been determined.
|
||||
*/
|
||||
memctl->memc_or3 = CFG_OR3_PRELIM;
|
||||
memctl->memc_br3 = CFG_BR3_PRELIM;
|
||||
|
||||
memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
|
||||
|
||||
udelay (200);
|
||||
|
||||
/* perform SDRAM initializsation sequence */
|
||||
|
||||
memctl->memc_mcr = 0x80006105; /* SDRAM bank 0 */
|
||||
udelay (200);
|
||||
memctl->memc_mcr = 0x80006230; /* SDRAM bank 0 - execute twice */
|
||||
udelay (200);
|
||||
|
||||
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
|
||||
|
||||
udelay (1000);
|
||||
|
||||
/*
|
||||
* Check Bank 0 Memory Size for re-configuration
|
||||
*
|
||||
* try 8 column mode
|
||||
*/
|
||||
size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE3_PRELIM,
|
||||
SDRAM_MAX_SIZE);
|
||||
|
||||
udelay (1000);
|
||||
|
||||
/*
|
||||
* try 9 column mode
|
||||
*/
|
||||
size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE3_PRELIM,
|
||||
SDRAM_MAX_SIZE);
|
||||
|
||||
udelay (1000);
|
||||
|
||||
if (size8 < size9) {
|
||||
size_b0 = size9;
|
||||
} else {
|
||||
size_b0 = size8;
|
||||
memctl->memc_mamr = CFG_MAMR_8COL;
|
||||
udelay (500);
|
||||
}
|
||||
|
||||
/*
|
||||
* Adjust refresh rate depending on SDRAM type, both banks.
|
||||
* For types > 128 MBit leave it at the current (fast) rate
|
||||
*/
|
||||
if ((size_b0 < 0x02000000)) {
|
||||
/* reduce to 15.6 us (62.4 us / quad) */
|
||||
memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
|
||||
udelay (1000);
|
||||
}
|
||||
|
||||
/*
|
||||
* Final mapping
|
||||
*/
|
||||
|
||||
memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
|
||||
memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
|
||||
|
||||
/* adjust refresh rate depending on SDRAM type, one bank */
|
||||
reg = memctl->memc_mptpr;
|
||||
reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
|
||||
memctl->memc_mptpr = reg;
|
||||
|
||||
udelay (10000);
|
||||
|
||||
return (size_b0);
|
||||
}
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
/*
|
||||
* Check memory range for valid RAM. A simple memory test determines
|
||||
* the actually available RAM size between addresses `base' and
|
||||
* `base + maxsize'. Some (not all) hardware errors are detected:
|
||||
* - short between address lines
|
||||
* - short between data lines
|
||||
*/
|
||||
|
||||
static long int dram_size (long int mamr_value, long int *base,
|
||||
long int maxsize)
|
||||
{
|
||||
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
||||
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
||||
|
||||
memctl->memc_mamr = mamr_value;
|
||||
|
||||
return (get_ram_size(base, maxsize));
|
||||
}
|
||||
|
|
@ -0,0 +1,126 @@
|
|||
/*
|
||||
* (C) Copyright 2001
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
OUTPUT_ARCH(powerpc)
|
||||
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
|
||||
/* Do we need any of these for elf?
|
||||
__DYNAMIC = 0; */
|
||||
SECTIONS
|
||||
{
|
||||
/* Read-only sections, merged into text segment: */
|
||||
. = + SIZEOF_HEADERS;
|
||||
.interp : { *(.interp) }
|
||||
.hash : { *(.hash) }
|
||||
.dynsym : { *(.dynsym) }
|
||||
.dynstr : { *(.dynstr) }
|
||||
.rel.text : { *(.rel.text) }
|
||||
.rela.text : { *(.rela.text) }
|
||||
.rel.data : { *(.rel.data) }
|
||||
.rela.data : { *(.rela.data) }
|
||||
.rel.rodata : { *(.rel.rodata) }
|
||||
.rela.rodata : { *(.rela.rodata) }
|
||||
.rel.got : { *(.rel.got) }
|
||||
.rela.got : { *(.rela.got) }
|
||||
.rel.ctors : { *(.rel.ctors) }
|
||||
.rela.ctors : { *(.rela.ctors) }
|
||||
.rel.dtors : { *(.rel.dtors) }
|
||||
.rela.dtors : { *(.rela.dtors) }
|
||||
.rel.bss : { *(.rel.bss) }
|
||||
.rela.bss : { *(.rela.bss) }
|
||||
.rel.plt : { *(.rel.plt) }
|
||||
.rela.plt : { *(.rela.plt) }
|
||||
.init : { *(.init) }
|
||||
.plt : { *(.plt) }
|
||||
.text :
|
||||
{
|
||||
cpu/mpc8xx/start.o (.text)
|
||||
*(.text)
|
||||
*(.fixup)
|
||||
*(.got1)
|
||||
}
|
||||
_etext = .;
|
||||
PROVIDE (etext = .);
|
||||
.rodata :
|
||||
{
|
||||
*(.rodata)
|
||||
*(.rodata1)
|
||||
*(.rodata.str1.4)
|
||||
}
|
||||
.fini : { *(.fini) } =0
|
||||
.ctors : { *(.ctors) }
|
||||
.dtors : { *(.dtors) }
|
||||
|
||||
/* Read-write section, merged into data segment: */
|
||||
. = (. + 0x0FFF) & 0xFFFFF000;
|
||||
_erotext = .;
|
||||
PROVIDE (erotext = .);
|
||||
.reloc :
|
||||
{
|
||||
*(.got)
|
||||
_GOT2_TABLE_ = .;
|
||||
*(.got2)
|
||||
_FIXUP_TABLE_ = .;
|
||||
*(.fixup)
|
||||
}
|
||||
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
|
||||
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
|
||||
|
||||
.data :
|
||||
{
|
||||
*(.data)
|
||||
*(.data1)
|
||||
*(.sdata)
|
||||
*(.sdata2)
|
||||
*(.dynamic)
|
||||
CONSTRUCTORS
|
||||
}
|
||||
_edata = .;
|
||||
PROVIDE (edata = .);
|
||||
|
||||
__u_boot_cmd_start = .;
|
||||
.u_boot_cmd : { *(.u_boot_cmd) }
|
||||
__u_boot_cmd_end = .;
|
||||
|
||||
|
||||
__start___ex_table = .;
|
||||
__ex_table : { *(__ex_table) }
|
||||
__stop___ex_table = .;
|
||||
|
||||
. = ALIGN(256);
|
||||
__init_begin = .;
|
||||
.text.init : { *(.text.init) }
|
||||
.data.init : { *(.data.init) }
|
||||
. = ALIGN(256);
|
||||
__init_end = .;
|
||||
|
||||
__bss_start = .;
|
||||
.bss :
|
||||
{
|
||||
*(.sbss) *(.scommon)
|
||||
*(.dynbss)
|
||||
*(.bss)
|
||||
*(COMMON)
|
||||
}
|
||||
_end = . ;
|
||||
PROVIDE (end = .);
|
||||
}
|
||||
|
|
@ -0,0 +1,125 @@
|
|||
/*
|
||||
* (C) Copyright 2001
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
OUTPUT_ARCH(powerpc)
|
||||
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
|
||||
/* Do we need any of these for elf?
|
||||
__DYNAMIC = 0; */
|
||||
SECTIONS
|
||||
{
|
||||
/* Read-only sections, merged into text segment: */
|
||||
. = + SIZEOF_HEADERS;
|
||||
.interp : { *(.interp) }
|
||||
.hash : { *(.hash) }
|
||||
.dynsym : { *(.dynsym) }
|
||||
.dynstr : { *(.dynstr) }
|
||||
.rel.text : { *(.rel.text) }
|
||||
.rela.text : { *(.rela.text) }
|
||||
.rel.data : { *(.rel.data) }
|
||||
.rela.data : { *(.rela.data) }
|
||||
.rel.rodata : { *(.rel.rodata) }
|
||||
.rela.rodata : { *(.rela.rodata) }
|
||||
.rel.got : { *(.rel.got) }
|
||||
.rela.got : { *(.rela.got) }
|
||||
.rel.ctors : { *(.rel.ctors) }
|
||||
.rela.ctors : { *(.rela.ctors) }
|
||||
.rel.dtors : { *(.rel.dtors) }
|
||||
.rela.dtors : { *(.rela.dtors) }
|
||||
.rel.bss : { *(.rel.bss) }
|
||||
.rela.bss : { *(.rela.bss) }
|
||||
.rel.plt : { *(.rel.plt) }
|
||||
.rela.plt : { *(.rela.plt) }
|
||||
.init : { *(.init) }
|
||||
.plt : { *(.plt) }
|
||||
.text :
|
||||
{
|
||||
cpu/mpc8xx/start.o (.text)
|
||||
*(.text)
|
||||
*(.fixup)
|
||||
*(.got1)
|
||||
}
|
||||
_etext = .;
|
||||
PROVIDE (etext = .);
|
||||
.rodata :
|
||||
{
|
||||
*(.rodata)
|
||||
*(.rodata1)
|
||||
}
|
||||
.fini : { *(.fini) } =0
|
||||
.ctors : { *(.ctors) }
|
||||
.dtors : { *(.dtors) }
|
||||
|
||||
/* Read-write section, merged into data segment: */
|
||||
. = (. + 0x0FFF) & 0xFFFFF000;
|
||||
_erotext = .;
|
||||
PROVIDE (erotext = .);
|
||||
.reloc :
|
||||
{
|
||||
*(.got)
|
||||
_GOT2_TABLE_ = .;
|
||||
*(.got2)
|
||||
_FIXUP_TABLE_ = .;
|
||||
*(.fixup)
|
||||
}
|
||||
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
|
||||
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
|
||||
|
||||
.data :
|
||||
{
|
||||
*(.data)
|
||||
*(.data1)
|
||||
*(.sdata)
|
||||
*(.sdata2)
|
||||
*(.dynamic)
|
||||
CONSTRUCTORS
|
||||
}
|
||||
_edata = .;
|
||||
PROVIDE (edata = .);
|
||||
|
||||
__u_boot_cmd_start = .;
|
||||
.u_boot_cmd : { *(.u_boot_cmd) }
|
||||
__u_boot_cmd_end = .;
|
||||
|
||||
|
||||
__start___ex_table = .;
|
||||
__ex_table : { *(__ex_table) }
|
||||
__stop___ex_table = .;
|
||||
|
||||
. = ALIGN(4096);
|
||||
__init_begin = .;
|
||||
.text.init : { *(.text.init) }
|
||||
.data.init : { *(.data.init) }
|
||||
. = ALIGN(4096);
|
||||
__init_end = .;
|
||||
|
||||
__bss_start = .;
|
||||
.bss :
|
||||
{
|
||||
*(.sbss) *(.scommon)
|
||||
*(.dynbss)
|
||||
*(.bss)
|
||||
*(COMMON)
|
||||
}
|
||||
_end = . ;
|
||||
PROVIDE (end = .);
|
||||
}
|
||||
|
|
@ -172,7 +172,7 @@ unsigned long measure_gclk(void)
|
|||
|
||||
#endif
|
||||
|
||||
#if !defined(CONFIG_TQM866M)
|
||||
#if !defined(CONFIG_TQM866M) && !defined(CONFIG_NC650)
|
||||
|
||||
/*
|
||||
* get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ
|
||||
|
|
|
|||
|
|
@ -0,0 +1,347 @@
|
|||
/*
|
||||
* (C) Copyright 2004
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
* board/config.h - configuration options, board specific
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
* (easy to change)
|
||||
*/
|
||||
#define CONFIG_MPC852T 1
|
||||
#define CONFIG_NC650 1
|
||||
|
||||
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
|
||||
#undef CONFIG_8xx_CONS_SMC2
|
||||
#undef CONFIG_8xx_CONS_NONE
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
|
||||
/*
|
||||
* 10 MHz - PLL input clock
|
||||
*/
|
||||
#define CFG_866_OSCCLK 10000000
|
||||
|
||||
/*
|
||||
* 50 MHz - default CPU clock
|
||||
*/
|
||||
#define CFG_866_CPUCLK_DEFAULT 50000000
|
||||
|
||||
/*
|
||||
* 15 MHz - CPU minimum clock
|
||||
*/
|
||||
#define CFG_866_CPUCLK_MIN 15000000
|
||||
|
||||
/*
|
||||
* 133 MHz - CPU maximum clock
|
||||
*/
|
||||
#define CFG_866_CPUCLK_MAX 133000000
|
||||
|
||||
#define CFG_MEASURE_CPUCLK
|
||||
#define CFG_8XX_XIN CFG_866_OSCCLK
|
||||
|
||||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
||||
|
||||
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"bootp;" \
|
||||
"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
|
||||
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
|
||||
"bootm"
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
#undef CONFIG_STATUS_LED /* Status LED disabled */
|
||||
|
||||
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
|
||||
|
||||
#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
|
||||
#define FEC_ENET
|
||||
#define CONFIG_MII
|
||||
#define CFG_DISCOVER_PHY 1
|
||||
|
||||
|
||||
/* enable I2C and select the hardware/software driver */
|
||||
#undef CONFIG_HARD_I2C /* I2C with hardware support */
|
||||
#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
|
||||
#define CFG_I2C_SPEED 100000 /* 100 kHz */
|
||||
#define CFG_I2C_SLAVE 0x7f
|
||||
|
||||
/*
|
||||
* Software (bit-bang) I2C driver configuration
|
||||
*/
|
||||
#define SCL 0x10000000 /* PA 3 */
|
||||
#define SDA 0x40000000 /* PA 1 */
|
||||
|
||||
#define PAR immr->im_ioport.iop_papar
|
||||
#define DIR immr->im_ioport.iop_padir
|
||||
#define DAT immr->im_ioport.iop_padat
|
||||
|
||||
#define I2C_INIT {PAR &= ~(SCL | SDA); DIR |= SCL;}
|
||||
#define I2C_ACTIVE (DIR |= SDA)
|
||||
#define I2C_TRISTATE (DIR &= ~SDA)
|
||||
#define I2C_READ ((DAT & SDA) != 0)
|
||||
#define I2C_SDA(bit) if (bit) DAT |= SDA; \
|
||||
else DAT &= ~SDA
|
||||
#define I2C_SCL(bit) if (bit) DAT |= SCL; \
|
||||
else DAT &= ~SCL
|
||||
#define I2C_DELAY udelay(50) /* 1/4 I2C clock duration */
|
||||
|
||||
#define CFG_I2C_EEPROM_ADDR 0x50
|
||||
#define CFG_I2C_EEPROM_ADDR_LEN 1
|
||||
#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* 16 bytes page write mode */
|
||||
|
||||
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
|
||||
|
||||
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
|
||||
CFG_CMD_ASKENV | \
|
||||
CFG_CMD_DHCP | \
|
||||
CFG_CMD_EEPROM | \
|
||||
CFG_CMD_I2C | \
|
||||
CFG_CMD_DATE )
|
||||
|
||||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
|
||||
|
||||
#define CFG_LOAD_ADDR 0x00100000
|
||||
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
|
||||
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
||||
|
||||
/*
|
||||
* Low Level Configuration Settings
|
||||
* (address mappings, register initial values, etc.)
|
||||
* You should know what you are doing if you make changes here.
|
||||
*/
|
||||
/*-----------------------------------------------------------------------
|
||||
* Internal Memory Mapped Register
|
||||
*/
|
||||
#define CFG_IMMR 0xF0000000
|
||||
#define CFG_IMMR_SIZE ((uint)(64 * 1024))
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Definitions for initial stack pointer and data area (in DPRAM)
|
||||
*/
|
||||
#define CFG_INIT_RAM_ADDR CFG_IMMR
|
||||
#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
|
||||
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Start addresses for the final memory configuration
|
||||
* (Set up by the startup code)
|
||||
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
||||
*/
|
||||
#define CFG_SDRAM_BASE 0x00000000
|
||||
#define CFG_FLASH_BASE 0x40000000
|
||||
|
||||
#define CFG_RESET_ADDRESS 0xFFF00100
|
||||
|
||||
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
||||
#define CFG_MONITOR_BASE TEXT_BASE
|
||||
#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH organization
|
||||
*/
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
||||
#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
|
||||
|
||||
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
||||
|
||||
|
||||
#define CFG_ENV_IS_IN_FLASH 1
|
||||
#define CFG_ENV_OFFSET 0x00740000
|
||||
|
||||
#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment sector */
|
||||
#define CFG_ENV_SIZE 0x4000 /* Used Size of Environment Sector */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Cache Configuration
|
||||
*/
|
||||
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SYPCR - System Protection Control 11-9
|
||||
* SYPCR can only be written once after reset!
|
||||
*-----------------------------------------------------------------------
|
||||
* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
|
||||
*/
|
||||
#if defined(CONFIG_WATCHDOG)
|
||||
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
|
||||
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
|
||||
#else
|
||||
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SIUMCR - SIU Module Configuration 11-6
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* TBSCR - Time Base Status and Control 11-26
|
||||
*-----------------------------------------------------------------------
|
||||
* Clear Reference Interrupt Status, Timebase freezing enabled
|
||||
*/
|
||||
#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PISCR - Periodic Interrupt Status and Control 11-31
|
||||
*-----------------------------------------------------------------------
|
||||
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
|
||||
*/
|
||||
#define CFG_PISCR (PISCR_PS | PISCR_PITF)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SCCR - System Clock and reset Control Register 15-27
|
||||
*-----------------------------------------------------------------------
|
||||
* Set clock output, timebase and RTC source and divider,
|
||||
* power management and some other internal clocks
|
||||
*/
|
||||
#define SCCR_MASK SCCR_EBDF11
|
||||
#define CFG_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | \
|
||||
SCCR_DFBRG00 | SCCR_DFNL000 | SCCR_DFNH000 | \
|
||||
SCCR_DFLCD000 | SCCR_DFALCD00)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*
|
||||
*-----------------------------------------------------------------------
|
||||
*
|
||||
*/
|
||||
#define CFG_DER 0
|
||||
|
||||
/*
|
||||
* Init Memory Controller:
|
||||
*
|
||||
* BR0 and OR0 (FLASH)
|
||||
*/
|
||||
|
||||
#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
|
||||
|
||||
#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
|
||||
#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
|
||||
|
||||
/* FLASH timing: Default value of OR0 after reset */
|
||||
#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
|
||||
OR_SCY_15_CLK | OR_TRLX)
|
||||
|
||||
#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
|
||||
#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
|
||||
#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V)
|
||||
|
||||
/*
|
||||
* BR3 and OR3 (SDRAM)
|
||||
*/
|
||||
#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank */
|
||||
#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
|
||||
|
||||
/*
|
||||
* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)
|
||||
*/
|
||||
#define CFG_OR_TIMING_SDRAM 0x00000A00
|
||||
|
||||
#define CFG_OR3_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM)
|
||||
#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
|
||||
|
||||
/*
|
||||
* 4096 Rows from SDRAM example configuration
|
||||
* 1000 factor s -> ms
|
||||
* 64 PTP (pre-divider from MPTPR) from SDRAM example configuration
|
||||
* 4 Number of refresh cycles per period
|
||||
* 64 Refresh cycle in ms per number of rows
|
||||
*/
|
||||
#define CFG_866_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64))
|
||||
|
||||
/*
|
||||
* Memory Periodic Timer Prescaler
|
||||
*/
|
||||
|
||||
/* periodic timer for refresh */
|
||||
#define CFG_MAMR_PTA 39
|
||||
|
||||
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
|
||||
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
|
||||
#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
|
||||
|
||||
/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
|
||||
#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
|
||||
#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
|
||||
|
||||
/*
|
||||
* MAMR settings for SDRAM
|
||||
*/
|
||||
|
||||
#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
|
||||
MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
|
||||
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
|
||||
#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
|
||||
MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
|
||||
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
|
||||
|
||||
/*
|
||||
* Internal Definitions
|
||||
*
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
@ -264,7 +264,7 @@ init_fnc_t *init_sequence[] = {
|
|||
board_early_init_f,
|
||||
#endif
|
||||
|
||||
#if !defined(CONFIG_TQM866M)
|
||||
#if !defined(CONFIG_TQM866M) && !defined(CONFIG_NC650)
|
||||
get_clocks, /* get CPU and bus clocks (etc.) */
|
||||
#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
|
||||
adjust_sdram_tbs_8xx,
|
||||
|
|
@ -280,7 +280,7 @@ init_fnc_t *init_sequence[] = {
|
|||
board_postclk_init,
|
||||
#endif
|
||||
env_init,
|
||||
#if defined(CONFIG_TQM866M)
|
||||
#if defined(CONFIG_TQM866M) || defined(CONFIG_NC650)
|
||||
get_clocks_866, /* get CPU and bus clocks according to the environment variable */
|
||||
sdram_adjust_866, /* adjust sdram refresh rate according to the new clock */
|
||||
init_timebase,
|
||||
|
|
|
|||
Loading…
Reference in New Issue