phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

fix comments with new drivers organization 

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
This commit is contained in:
Marcel Ziswiler 2007-12-30 03:30:46 +01:00 committed by Wolfgang Denk
parent a9b410dc7d
commit 7817cb2083
24 changed files with 31 additions and 30 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
README
View File

@ -924,7 +924,7 @@ The following options need to be configured:
(i.e. setenv videomode 317; saveenv; reset;)
- "videomode=bootargs" all the video parameters are parsed
from the bootargs. (See drivers/videomodes.c)
from the bootargs. (See drivers/video/videomodes.c)
CONFIG_VIDEO_SED13806
@ -1353,7 +1353,7 @@ The following options need to be configured:
CONFIG_FSL_I2C
Define this option if you want to use Freescale's I2C driver in
drivers/fsl_i2c.c.
drivers/i2c/fsl_i2c.c.
- SPI Support: CONFIG_SPI

2
board/sc3/sc3.c
View File

@ -757,7 +757,7 @@ static struct pci_config_table pci_solidcard3_config_table[] =
};
/*-------------------------------------------------------------------------+
| pci_init_board (Called from pci_init() in drivers/pci.c)
| pci_init_board (Called from pci_init() in drivers/pci/pci.c)
|
| Init the PCI part of the SolidCard III
|

4
board/ssv/common/cmd_sled.c
View File

@ -32,8 +32,8 @@
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
* !!!!! !!!!!
* !!!!! Next type definition was coming from original !!!!!
* !!!!! status LED driver drivers/status_led.c and !!!!!
* !!!!! should exported for using here. !!!!!
* !!!!! status LED driver drivers/misc/status_led.c !!!!!
* !!!!! and should be exported for using it here. !!!!!
* !!!!! !!!!!
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */

2
common/env_nand.c
View File

@ -57,7 +57,7 @@ int nand_legacy_rw (struct nand_chip* nand, int cmd,
size_t start, size_t len,
size_t * retlen, u_char * buf);
/* info for NAND chips, defined in drivers/nand/nand.c */
/* info for NAND chips, defined in drivers/mtd/nand/nand.c */
extern nand_info_t nand_info[];
/* references to names in env_common.c */

2
cpu/ppc4xx/4xx_pci.c
View File

@ -339,7 +339,7 @@ void pci_405gp_init(struct pci_controller *hose)
}
/*
* drivers/pci.c skips every host bridge but the 405GP since it could
* drivers/pci/pci.c skips every host bridge but the 405GP since it could
* be set as an Adapter.
*
* I (Andrew May) don't know what we should do here, but I don't want

2
doc/README.generic_usb_ohci
View File

@ -1,7 +1,7 @@
Notes on the the generic USB-OHCI driver
========================================
This driver (drivers/usb_ohci.[ch]) is the result of the merge of
This driver (drivers/usb/usb_ohci.[ch]) is the result of the merge of
various existing OHCI drivers that were basically identical beside
cpu/board dependant initalization. This initalization has been moved
into cpu/board directories and are called via the hooks below.

4
doc/README.modnet50
View File

@ -51,8 +51,8 @@ board/modnet50/lowlevel_init.S .. memory setup for ModNET50
board/modnet50/flash.c .. flash routines
board/modnet50/modnet50.c .. some board init stuff
drivers/netarm_eth.c .. ethernet driver for the NET+50 CPU
drivers/netarm_eth.h .. header for ethernet driver
drivers/net/netarm_eth.c .. ethernet driver for the NET+50 CPU
drivers/net/netarm_eth.h .. header for ethernet driver
include/configs/modnet50.h .. configuration file for ModNET50

2
drivers/mtd/nand/nand_util.c
View File

@ -1,5 +1,5 @@
/*
* drivers/nand/nand_util.c
* drivers/mtd/nand/nand_util.c
*
* Copyright (C) 2006 by Weiss-Electronic GmbH.
* All rights reserved.

2
drivers/net/sk98lin/Makefile
View File

@ -20,7 +20,7 @@
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
# File: drivers/sk98lin/Makefile
# File: drivers/net/sk98lin/Makefile
#
# Makefile for the SysKonnect SK-98xx device driver.
#

2
drivers/usb/isp116x-hcd.c
View File

@ -20,7 +20,7 @@
* MA 02111-1307 USA
*
*
* Derived in part from the SL811 HCD driver "u-boot/drivers/sl811_usb.c"
* Derived in part from the SL811 HCD driver "u-boot/drivers/usb/sl811_usb.c"
* (original copyright message follows):
*
* (C) Copyright 2004

3
drivers/usb/usbdcore_mpc8xx.c
View File

@ -3,7 +3,8 @@
* bodonoghue@CodeHermit.ie
*
* References
* DasUBoot/drivers/usbdcore_omap1510.c, for design and implementation ideas.
* DasUBoot/drivers/usb/usbdcore_omap1510.c, for design and implementation
* ideas.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

8
drivers/video/cfb_console.c
View File

@ -187,9 +187,9 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the
/*****************************************************************************/
/* Cursor definition: */
/* CONFIG_CONSOLE_CURSOR: Uses a timer function (see drivers/i8042.c) to */
/* let the cursor blink. Uses the macros CURSOR_OFF */
/* and CURSOR_ON. */
/* CONFIG_CONSOLE_CURSOR: Uses a timer function (see drivers/input/i8042.c) */
/* to let the cursor blink. Uses the macros */
/* CURSOR_OFF and CURSOR_ON. */
/* CONFIG_VIDEO_SW_CURSOR: Draws a cursor after the last character. No */
/* blinking is provided. Uses the macros CURSOR_SET */
/* and CURSOR_OFF. */
@ -217,7 +217,7 @@ void console_cursor (int state);
#define CURSOR_OFF console_cursor(0);
#define CURSOR_SET
#ifndef CONFIG_I8042_KBD
#warning Cursor drawing on/off needs timer function s.a. drivers/i8042.c
#warning Cursor drawing on/off needs timer function s.a. drivers/input/i8042.c
#endif
#else
#ifdef CONFIG_CONSOLE_TIME

2
fs/jffs2/jffs2_1pass.c
View File

@ -165,7 +165,7 @@ static struct part_info *current_part;
int read_jffs2_nand(size_t start, size_t len,
size_t * retlen, u_char * buf, int nanddev);
#else
/* info for NAND chips, defined in drivers/nand/nand.c */
/* info for NAND chips, defined in drivers/mtd/nand/nand.c */
extern nand_info_t nand_info[];
#endif

2
include/configs/CATcenter.h
View File

@ -473,7 +473,7 @@
#define CONFIG_VGA_AS_SINGLE_DEVICE
/* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */
#define CFG_ISA_IO 0xE8000000
/* see also drivers/videomodes.c */
/* see also drivers/video/videomodes.c */
#define CFG_DEFAULT_VIDEO_MODE 0x303
#endif

2
include/configs/MPC8313ERDB.h
View File

@ -192,7 +192,7 @@
#define CFG_LBC_MRTPR 0x20000000 /*TODO */ /* LB refresh timer prescal, 266MHz/32 */
/* drivers/nand/nand.c */
/* drivers/mtd/nand/nand.c */
#define CFG_NAND_BASE 0xE2800000 /* 0xF0000000 */
#define CFG_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS 1

2
include/configs/PPChameleonEVB.h
View File

@ -496,7 +496,7 @@
#define CONFIG_VGA_AS_SINGLE_DEVICE
/* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */
#define CFG_ISA_IO 0xE8000000
/* see also drivers/videomodes.c */
/* see also drivers/video/videomodes.c */
#define CFG_DEFAULT_VIDEO_MODE 0x303
#endif

2
include/configs/SX1.h
View File

@ -181,7 +181,7 @@
* FLASH driver setup
*/
#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */

2
include/configs/integratorcp.h
View File

@ -168,7 +168,7 @@ SIB at Block62 End Block62 address 0x24f80000
/*
* Move up the U-Boot & monitor area if more flash is fitted.
* If this U-Boot is to be run on Integrators with varying flash sizes,
* drivers/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
* drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
* register and dynamically assign CFG_ENV_ADDR & CFG_MONITOR_BASE
* - CFG_MONITOR_BASE is set to indicate that the environment is not
* embedded in the boot monitor(s) area

2
include/configs/omap1510inn.h
View File

@ -179,7 +179,7 @@
* FLASH driver setup
*/
#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */

2
include/configs/omap2420h4.h
View File

@ -283,7 +283,7 @@
* CFI FLASH driver setup
*/
#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */

2
include/configs/omap5912osk.h
View File

@ -174,7 +174,7 @@
* FLASH driver setup
*/
#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */
#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }

2
nand_spl/board/amcc/acadia/Makefile
View File

@ -97,7 +97,7 @@ $(obj)nand_boot.c:
@rm -f $(obj)nand_boot.c
ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
# from drivers/nand directory
# from drivers/mtd/nand directory
$(obj)nand_ecc.c:
@rm -f $(obj)nand_ecc.c
ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c

2
nand_spl/board/amcc/bamboo/Makefile
View File

@ -79,7 +79,7 @@ $(obj)nand_boot.c:
@rm -f $(obj)nand_boot.c
ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
# from drivers/nand directory
# from drivers/mtd/nand directory
$(obj)nand_ecc.c:
@rm -f $(obj)nand_ecc.c
ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c

2
nand_spl/board/amcc/sequoia/Makefile
View File

@ -89,7 +89,7 @@ $(obj)nand_boot.c:
@rm -f $(obj)nand_boot.c
ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
# from drivers/nand directory
# from drivers/mtd/nand directory
$(obj)nand_ecc.c:
@rm -f $(obj)nand_ecc.c
ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c