phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

mpc83xx: add QE ethernet support 

this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
This commit is contained in:
Dave Liu 2006-11-03 12:11:15 -06:00 committed by Kim Phillips
parent 5f8204394e
commit 7737d5c658
18 changed files with 4138 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Makefile
View File

@ -203,6 +203,9 @@ LIBS += dtt/libdtt.a
LIBS += drivers/libdrivers.a
LIBS += drivers/nand/libnand.a
LIBS += drivers/nand_legacy/libnand_legacy.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
endif
LIBS += drivers/sk98lin/libsk98lin.a
LIBS += post/libpost.a post/cpu/libcpu.a
LIBS += common/libcommon.a

56
board/mpc8360emds/mpc8360emds.c
View File

@ -29,6 +29,62 @@
#include <asm/mmu.h>
#endif
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* GETH1 */
{0, 3, 1, 0, 1}, /* TxD0 */
{0, 4, 1, 0, 1}, /* TxD1 */
{0, 5, 1, 0, 1}, /* TxD2 */
{0, 6, 1, 0, 1}, /* TxD3 */
{1, 6, 1, 0, 3}, /* TxD4 */
{1, 7, 1, 0, 1}, /* TxD5 */
{1, 9, 1, 0, 2}, /* TxD6 */
{1, 10, 1, 0, 2}, /* TxD7 */
{0, 9, 2, 0, 1}, /* RxD0 */
{0, 10, 2, 0, 1}, /* RxD1 */
{0, 11, 2, 0, 1}, /* RxD2 */
{0, 12, 2, 0, 1}, /* RxD3 */
{0, 13, 2, 0, 1}, /* RxD4 */
{1, 1, 2, 0, 2}, /* RxD5 */
{1, 0, 2, 0, 2}, /* RxD6 */
{1, 4, 2, 0, 2}, /* RxD7 */
{0, 7, 1, 0, 1}, /* TX_EN */
{0, 8, 1, 0, 1}, /* TX_ER */
{0, 15, 2, 0, 1}, /* RX_DV */
{0, 16, 2, 0, 1}, /* RX_ER */
{0, 0, 2, 0, 1}, /* RX_CLK */
{2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */
{2, 8, 2, 0, 1}, /* GTX125 - CLK9 */
/* GETH2 */
{0, 17, 1, 0, 1}, /* TxD0 */
{0, 18, 1, 0, 1}, /* TxD1 */
{0, 19, 1, 0, 1}, /* TxD2 */
{0, 20, 1, 0, 1}, /* TxD3 */
{1, 2, 1, 0, 1}, /* TxD4 */
{1, 3, 1, 0, 2}, /* TxD5 */
{1, 5, 1, 0, 3}, /* TxD6 */
{1, 8, 1, 0, 3}, /* TxD7 */
{0, 23, 2, 0, 1}, /* RxD0 */
{0, 24, 2, 0, 1}, /* RxD1 */
{0, 25, 2, 0, 1}, /* RxD2 */
{0, 26, 2, 0, 1}, /* RxD3 */
{0, 27, 2, 0, 1}, /* RxD4 */
{1, 12, 2, 0, 2}, /* RxD5 */
{1, 13, 2, 0, 3}, /* RxD6 */
{1, 11, 2, 0, 2}, /* RxD7 */
{0, 21, 1, 0, 1}, /* TX_EN */
{0, 22, 1, 0, 1}, /* TX_ER */
{0, 29, 2, 0, 1}, /* RX_DV */
{0, 30, 2, 0, 1}, /* RX_ER */
{0, 31, 2, 0, 1}, /* RX_CLK */
{2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */
{2, 3, 2, 0, 1}, /* GTX125 - CLK4 */
{0, 1, 3, 0, 2}, /* MDIO */
{0, 2, 1, 0, 1}, /* MDC */
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
};
int board_early_init_f(void)
{
volatile u8 *bcsr = (volatile u8 *)CFG_BCSR;

2
cpu/mpc83xx/Makefile
View File

@ -29,7 +29,7 @@ LIB = $(obj)lib$(CPU).a
START = start.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
i2c.o spd_sdram.o
i2c.o spd_sdram.o qe_io.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))

40
cpu/mpc83xx/cpu_init.c
View File

@ -1,5 +1,5 @@
/*
* Copyright 2004 Freescale Semiconductor, Inc.
* Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@ -31,6 +31,30 @@
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
int open_drain, int assign);
extern void qe_init(uint qe_base);
extern void qe_reset(void);
static void config_qe_ioports(void)
{
u8 port, pin;
int dir, open_drain, assign;
int i;
for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
port = qe_iop_conf_tab[i].port;
pin = qe_iop_conf_tab[i].pin;
dir = qe_iop_conf_tab[i].dir;
open_drain = qe_iop_conf_tab[i].open_drain;
assign = qe_iop_conf_tab[i].assign;
qe_config_iopin(port, pin, dir, open_drain, assign);
}
}
#endif
/*
* Breathe some life into the CPU...
*
@ -100,6 +124,10 @@ void cpu_init_f (volatile immap_t * im)
#ifdef CFG_SICRL
im->sysconf.sicrl = CFG_SICRL;
#endif
#ifdef CONFIG_QE
/* Config QE ioports */
config_qe_ioports();
#endif
/*
* Memory Controller:
@ -188,12 +216,12 @@ void cpu_init_f (volatile immap_t * im)
#endif
}
/*
* Initialize higher level parts of CPU like time base and timers.
*/
int cpu_init_r (void)
{
#ifdef CONFIG_QE
uint qe_base = CFG_IMMRBAR + 0x00100000; /* QE immr base */
qe_init(qe_base);
qe_reset();
#endif
return 0;
}

85
cpu/mpc83xx/qe_io.c Normal file
View File

@ -0,0 +1,85 @@
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
* based on source code of Shlomi Gridish
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include "common.h"
#include "asm/errno.h"
#include "asm/io.h"
#include "asm/immap_83xx.h"
#if defined(CONFIG_QE)
#define NUM_OF_PINS 32
void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
{
u32 pin_2bit_mask;
u32 pin_2bit_dir;
u32 pin_2bit_assign;
u32 pin_1bit_mask;
u32 tmp_val;
volatile immap_t *im = (volatile immap_t *)CFG_IMMRBAR;
volatile gpio83xx_t *par_io =(volatile gpio83xx_t *)&im->gpio;
/* Caculate pin location and 2bit mask and dir */
pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
/* Setup the direction */
tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
in_be32(&par_io->ioport[port].dir2) :
in_be32(&par_io->ioport[port].dir1);
if (pin > (NUM_OF_PINS/2) -1) {
out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val);
out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val);
} else {
out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val);
out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val);
}
/* Calculate pin location for 1bit mask */
pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
/* Setup the open drain */
tmp_val = in_be32(&par_io->ioport[port].podr);
if (open_drain) {
out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val);
} else {
out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val);
}
/* Setup the assignment */
tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
in_be32(&par_io->ioport[port].ppar2):
in_be32(&par_io->ioport[port].ppar1);
pin_2bit_assign = (u32)(assign
<< (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
/* Clear and set 2 bits mask */
if (pin > (NUM_OF_PINS/2) - 1) {
out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val);
out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val);
} else {
out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val);
out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val);
}
}
#endif /* CONFIG_QE */

43
drivers/qe/Makefile Normal file
View File

@ -0,0 +1,43 @@
#
# Copyright (C) 2006 Freescale Semiconductor, Inc.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB := $(obj)qe.a
COBJS := qe.o uccf.o uec.o uec_phy.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

254
drivers/qe/qe.c Normal file
View File

@ -0,0 +1,254 @@
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
* based on source code of Shlomi Gridish
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include "common.h"
#include "asm/errno.h"
#include "asm/io.h"
#include "asm/immap_qe.h"
#include "qe.h"
#if defined(CONFIG_QE)
qe_map_t *qe_immr = NULL;
static qe_snum_t snums[QE_NUM_OF_SNUM];
void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
{
u32 cecr;
if (cmd == QE_RESET) {
out_be32(&qe_immr->cp.cecr,(u32) (cmd | QE_CR_FLG));
} else {
out_be32(&qe_immr->cp.cecdr, cmd_data);
out_be32(&qe_immr->cp.cecr, (sbc | QE_CR_FLG |
((u32) mcn<<QE_CR_PROTOCOL_SHIFT) | cmd));
}
/* Wait for the QE_CR_FLG to clear */
do {
cecr = in_be32(&qe_immr->cp.cecr);
} while (cecr & QE_CR_FLG);
return;
}
uint qe_muram_alloc(uint size, uint align)
{
DECLARE_GLOBAL_DATA_PTR;
uint retloc;
uint align_mask, off;
uint savebase;
align_mask = align - 1;
savebase = gd->mp_alloc_base;
if ((off = (gd->mp_alloc_base & align_mask)) != 0)
gd->mp_alloc_base += (align - off);
if ((off = size & align_mask) != 0)
size += (align - off);
if ((gd->mp_alloc_base + size) >= gd->mp_alloc_top) {
gd->mp_alloc_base = savebase;
printf("%s: ran out of ram.\n", __FUNCTION__);
}
retloc = gd->mp_alloc_base;
gd->mp_alloc_base += size;
memset((void *)&qe_immr->muram[retloc], 0, size);
__asm__ __volatile__("sync");
return retloc;
}
void *qe_muram_addr(uint offset)
{
return (void *)&qe_immr->muram[offset];
}
static void qe_sdma_init(void)
{
volatile sdma_t *p;
uint sdma_buffer_base;
p = (volatile sdma_t *)&qe_immr->sdma;
/* All of DMA transaction in bus 1 */
out_be32(&p->sdaqr, 0);
out_be32(&p->sdaqmr, 0);
/* Allocate 2KB temporary buffer for sdma */
sdma_buffer_base = qe_muram_alloc(2048, 64);
out_be32(&p->sdwbcr, sdma_buffer_base & QE_SDEBCR_BA_MASK);
/* Clear sdma status */
out_be32(&p->sdsr, 0x03000000);
/* Enable global mode on bus 1, and 2KB buffer size */
out_be32(&p->sdmr, QE_SDMR_GLB_1_MSK | (0x3 << QE_SDMR_CEN_SHIFT));
}
static u8 thread_snum[QE_NUM_OF_SNUM] = {
0x04, 0x05, 0x0c, 0x0d,
0x14, 0x15, 0x1c, 0x1d,
0x24, 0x25, 0x2c, 0x2d,
0x34, 0x35, 0x88, 0x89,
0x98, 0x99, 0xa8, 0xa9,
0xb8, 0xb9, 0xc8, 0xc9,
0xd8, 0xd9, 0xe8, 0xe9
};
static void qe_snums_init(void)
{
int i;
for (i = 0; i < QE_NUM_OF_SNUM; i++) {
snums[i].state = QE_SNUM_STATE_FREE;
snums[i].num = thread_snum[i];
}
}
int qe_get_snum(void)
{
int snum = -EBUSY;
int i;
for (i = 0; i < QE_NUM_OF_SNUM; i++) {
if (snums[i].state == QE_SNUM_STATE_FREE) {
snums[i].state = QE_SNUM_STATE_USED;
snum = snums[i].num;
break;
}
}
return snum;
}
void qe_put_snum(u8 snum)
{
int i;
for (i = 0; i < QE_NUM_OF_SNUM; i++) {
if (snums[i].num == snum) {
snums[i].state = QE_SNUM_STATE_FREE;
break;
}
}
}
void qe_init(uint qe_base)
{
DECLARE_GLOBAL_DATA_PTR;
/* Init the QE IMMR base */
qe_immr = (qe_map_t *)qe_base;
gd->mp_alloc_base = QE_DATAONLY_BASE;
gd->mp_alloc_top = gd->mp_alloc_base + QE_DATAONLY_SIZE;
qe_sdma_init();
qe_snums_init();
}
void qe_reset(void)
{
qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
(u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
void qe_assign_page(uint snum, uint para_ram_base)
{
u32 cecr;
out_be32(&qe_immr->cp.cecdr, para_ram_base);
out_be32(&qe_immr->cp.cecr, ((u32) snum<<QE_CR_ASSIGN_PAGE_SNUM_SHIFT)
| QE_CR_FLG | QE_ASSIGN_PAGE);
/* Wait for the QE_CR_FLG to clear */
do {
cecr = in_be32(&qe_immr->cp.cecr);
} while (cecr & QE_CR_FLG );
return;
}
/*
* brg: 0~15 as BRG1~BRG16
rate: baud rate
* BRG input clock comes from the BRGCLK (internal clock generated from
the QE clock, it is one-half of the QE clock), If need the clock source
from CLKn pin, we have te change the function.
*/
#define BRG_CLK (gd->brg_clk)
int qe_set_brg(uint brg, uint rate)
{
DECLARE_GLOBAL_DATA_PTR;
volatile uint *bp;
u32 divisor;
int div16 = 0;
if (brg >= QE_NUM_OF_BRGS)
return -EINVAL;
bp = (uint *)&qe_immr->brg.brgc1;
bp += brg;
divisor = (BRG_CLK / rate);
if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
div16 = 1;
divisor /= 16;
}
*bp = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
__asm__ __volatile__("sync");
if (div16) {
*bp |= QE_BRGC_DIV16;
__asm__ __volatile__("sync");
}
return 0;
}
/* Set ethernet MII clock master
*/
int qe_set_mii_clk_src(int ucc_num)
{
u32 cmxgcr;
/* check if the UCC number is in range. */
if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) {
printf("%s: ucc num not in ranges\n", __FUNCTION__);
return -EINVAL;
}
cmxgcr = in_be32(&qe_immr->qmx.cmxgcr);
cmxgcr &= ~QE_CMXGCR_MII_ENET_MNG_MASK;
cmxgcr |= (ucc_num <<QE_CMXGCR_MII_ENET_MNG_SHIFT);
out_be32(&qe_immr->qmx.cmxgcr, cmxgcr);
return 0;
}
#endif /* CONFIG_QE */

237
drivers/qe/qe.h Normal file
View File

@ -0,0 +1,237 @@
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
* based on source code of Shlomi Gridish
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __QE_H__
#define __QE_H__
#include "common.h"
#define QE_NUM_OF_SNUM 28
#define QE_NUM_OF_BRGS 16
#define UCC_MAX_NUM 8
#define QE_DATAONLY_BASE (uint)(128)
#define QE_DATAONLY_SIZE ((uint)(0xc000) - QE_DATAONLY_BASE)
/* QE threads SNUM
*/
typedef enum qe_snum_state {
QE_SNUM_STATE_USED, /* used */
QE_SNUM_STATE_FREE /* free */
} qe_snum_state_e;
typedef struct qe_snum {
u8 num; /* snum */
qe_snum_state_e state; /* state */
} qe_snum_t;
/* QE RISC allocation
*/
typedef enum qe_risc_allocation {
QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */
QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */
QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* RISC 1 or RISC 2 */
} qe_risc_allocation_e;
/* QE CECR commands for UCC fast.
*/
#define QE_CR_FLG 0x00010000
#define QE_RESET 0x80000000
#define QE_INIT_TX_RX 0x00000000
#define QE_INIT_RX 0x00000001
#define QE_INIT_TX 0x00000002
#define QE_ENTER_HUNT_MODE 0x00000003
#define QE_STOP_TX 0x00000004
#define QE_GRACEFUL_STOP_TX 0x00000005
#define QE_RESTART_TX 0x00000006
#define QE_SWITCH_COMMAND 0x00000007
#define QE_SET_GROUP_ADDRESS 0x00000008
#define QE_INSERT_CELL 0x00000009
#define QE_ATM_TRANSMIT 0x0000000a
#define QE_CELL_POOL_GET 0x0000000b
#define QE_CELL_POOL_PUT 0x0000000c
#define QE_IMA_HOST_CMD 0x0000000d
#define QE_ATM_MULTI_THREAD_INIT 0x00000011
#define QE_ASSIGN_PAGE 0x00000012
#define QE_START_FLOW_CONTROL 0x00000014
#define QE_STOP_FLOW_CONTROL 0x00000015
#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
#define QE_GRACEFUL_STOP_RX 0x0000001a
#define QE_RESTART_RX 0x0000001b
/* QE CECR Sub Block Code - sub block code of QE command.
*/
#define QE_CR_SUBBLOCK_INVALID 0x00000000
#define QE_CR_SUBBLOCK_USB 0x03200000
#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
#define QE_CR_SUBBLOCK_MCC1 0x03800000
#define QE_CR_SUBBLOCK_MCC2 0x03a00000
#define QE_CR_SUBBLOCK_MCC3 0x03000000
#define QE_CR_SUBBLOCK_IDMA1 0x02800000
#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
#define QE_CR_SUBBLOCK_HPAC 0x01e00000
#define QE_CR_SUBBLOCK_SPI1 0x01400000
#define QE_CR_SUBBLOCK_SPI2 0x01600000
#define QE_CR_SUBBLOCK_RAND 0x01c00000
#define QE_CR_SUBBLOCK_TIMER 0x01e00000
#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command.
*/
#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
#define QE_CR_PROTOCOL_ATM_POS 0x0A
#define QE_CR_PROTOCOL_ETHERNET 0x0C
#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
#define QE_CR_PROTOCOL_SHIFT 6
/* QE ASSIGN PAGE command
*/
#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT 17
/* Communication Direction.
*/
typedef enum comm_dir {
COMM_DIR_NONE = 0,
COMM_DIR_RX = 1,
COMM_DIR_TX = 2,
COMM_DIR_RX_AND_TX = 3
} comm_dir_e;
/* Clocks and BRG's
*/
typedef enum qe_clock {
QE_CLK_NONE = 0,
QE_BRG1, /* Baud Rate Generator 1 */
QE_BRG2, /* Baud Rate Generator 2 */
QE_BRG3, /* Baud Rate Generator 3 */
QE_BRG4, /* Baud Rate Generator 4 */
QE_BRG5, /* Baud Rate Generator 5 */
QE_BRG6, /* Baud Rate Generator 6 */
QE_BRG7, /* Baud Rate Generator 7 */
QE_BRG8, /* Baud Rate Generator 8 */
QE_BRG9, /* Baud Rate Generator 9 */
QE_BRG10, /* Baud Rate Generator 10 */
QE_BRG11, /* Baud Rate Generator 11 */
QE_BRG12, /* Baud Rate Generator 12 */
QE_BRG13, /* Baud Rate Generator 13 */
QE_BRG14, /* Baud Rate Generator 14 */
QE_BRG15, /* Baud Rate Generator 15 */
QE_BRG16, /* Baud Rate Generator 16 */
QE_CLK1, /* Clock 1 */
QE_CLK2, /* Clock 2 */
QE_CLK3, /* Clock 3 */
QE_CLK4, /* Clock 4 */
QE_CLK5, /* Clock 5 */
QE_CLK6, /* Clock 6 */
QE_CLK7, /* Clock 7 */
QE_CLK8, /* Clock 8 */
QE_CLK9, /* Clock 9 */
QE_CLK10, /* Clock 10 */
QE_CLK11, /* Clock 11 */
QE_CLK12, /* Clock 12 */
QE_CLK13, /* Clock 13 */
QE_CLK14, /* Clock 14 */
QE_CLK15, /* Clock 15 */
QE_CLK16, /* Clock 16 */
QE_CLK17, /* Clock 17 */
QE_CLK18, /* Clock 18 */
QE_CLK19, /* Clock 19 */
QE_CLK20, /* Clock 20 */
QE_CLK21, /* Clock 21 */
QE_CLK22, /* Clock 22 */
QE_CLK23, /* Clock 23 */
QE_CLK24, /* Clock 24 */
QE_CLK_DUMMY
} qe_clock_e;
/* QE CMXGCR register
*/
#define QE_CMXGCR_MII_ENET_MNG_MASK 0x00007000
#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
/* QE CMXUCR registers
*/
#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
/* QE BRG configuration register
*/
#define QE_BRGC_ENABLE 0x00010000
#define QE_BRGC_DIVISOR_SHIFT 1
#define QE_BRGC_DIVISOR_MAX 0xFFF
#define QE_BRGC_DIV16 1
/* QE SDMA registers
*/
#define QE_SDSR_BER1 0x02000000
#define QE_SDSR_BER2 0x01000000
#define QE_SDMR_GLB_1_MSK 0x80000000
#define QE_SDMR_ADR_SEL 0x20000000
#define QE_SDMR_BER1_MSK 0x02000000
#define QE_SDMR_BER2_MSK 0x01000000
#define QE_SDMR_EB1_MSK 0x00800000
#define QE_SDMR_ER1_MSK 0x00080000
#define QE_SDMR_ER2_MSK 0x00040000
#define QE_SDMR_CEN_MASK 0x0000E000
#define QE_SDMR_SBER_1 0x00000200
#define QE_SDMR_SBER_2 0x00000200
#define QE_SDMR_EB1_PR_MASK 0x000000C0
#define QE_SDMR_ER1_PR 0x00000008
#define QE_SDMR_CEN_SHIFT 13
#define QE_SDMR_EB1_PR_SHIFT 6
#define QE_SDTM_MSNUM_SHIFT 24
#define QE_SDEBCR_BA_MASK 0x01FFFFFF
void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign);
void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data);
uint qe_muram_alloc(uint size, uint align);
void *qe_muram_addr(uint offset);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
void qe_init(uint qe_base);
void qe_reset(void);
void qe_assign_page(uint snum, uint para_ram_base);
int qe_set_brg(uint brg, uint rate);
int qe_set_mii_clk_src(int ucc_num);
#endif /* __QE_H__ */

404
drivers/qe/uccf.c Normal file
View File

@ -0,0 +1,404 @@
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
* based on source code of Shlomi Gridish
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include "common.h"
#include "malloc.h"
#include "asm/errno.h"
#include "asm/io.h"
#include "asm/immap_qe.h"
#include "qe.h"
#include "uccf.h"
#if defined(CONFIG_QE)
void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf)
{
out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
}
u32 ucc_fast_get_qe_cr_subblock(int ucc_num)
{
switch (ucc_num) {
case 0: return QE_CR_SUBBLOCK_UCCFAST1;
case 1: return QE_CR_SUBBLOCK_UCCFAST2;
case 2: return QE_CR_SUBBLOCK_UCCFAST3;
case 3: return QE_CR_SUBBLOCK_UCCFAST4;
case 4: return QE_CR_SUBBLOCK_UCCFAST5;
case 5: return QE_CR_SUBBLOCK_UCCFAST6;
case 6: return QE_CR_SUBBLOCK_UCCFAST7;
case 7: return QE_CR_SUBBLOCK_UCCFAST8;
default: return QE_CR_SUBBLOCK_INVALID;
}
}
static void ucc_get_cmxucr_reg(int ucc_num, volatile u32 **p_cmxucr,
u8 *reg_num, u8 *shift)
{
switch (ucc_num) {
case 0: /* UCC1 */
*p_cmxucr = &(qe_immr->qmx.cmxucr1);
*reg_num = 1;
*shift = 16;
break;
case 2: /* UCC3 */
*p_cmxucr = &(qe_immr->qmx.cmxucr1);
*reg_num = 1;
*shift = 0;
break;
case 4: /* UCC5 */
*p_cmxucr = &(qe_immr->qmx.cmxucr2);
*reg_num = 2;
*shift = 16;
break;
case 6: /* UCC7 */
*p_cmxucr = &(qe_immr->qmx.cmxucr2);
*reg_num = 2;
*shift = 0;
break;
case 1: /* UCC2 */
*p_cmxucr = &(qe_immr->qmx.cmxucr3);
*reg_num = 3;
*shift = 16;
break;
case 3: /* UCC4 */
*p_cmxucr = &(qe_immr->qmx.cmxucr3);
*reg_num = 3;
*shift = 0;
break;
case 5: /* UCC6 */
*p_cmxucr = &(qe_immr->qmx.cmxucr4);
*reg_num = 4;
*shift = 16;
break;
case 7: /* UCC8 */
*p_cmxucr = &(qe_immr->qmx.cmxucr4);
*reg_num = 4;
*shift = 0;
break;
default:
break;
}
}
static int ucc_set_clk_src(int ucc_num, qe_clock_e clock, comm_dir_e mode)
{
volatile u32 *p_cmxucr;
u8 reg_num;
u8 shift;
u32 clockBits;
u32 clockMask;
int source = -1;
/* check if the UCC number is in range. */
if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
return -EINVAL;
if (! ((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
printf("%s: bad comm mode type passed\n", __FUNCTION__);
return -EINVAL;
}
ucc_get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
switch (reg_num) {
case 1:
switch (clock) {
case QE_BRG1: source = 1; break;
case QE_BRG2: source = 2; break;
case QE_BRG7: source = 3; break;
case QE_BRG8: source = 4; break;
case QE_CLK9: source = 5; break;
case QE_CLK10: source = 6; break;
case QE_CLK11: source = 7; break;
case QE_CLK12: source = 8; break;
case QE_CLK15: source = 9; break;
case QE_CLK16: source = 10; break;
default: source = -1; break;
}
break;
case 2:
switch (clock) {
case QE_BRG5: source = 1; break;
case QE_BRG6: source = 2; break;
case QE_BRG7: source = 3; break;
case QE_BRG8: source = 4; break;
case QE_CLK13: source = 5; break;
case QE_CLK14: source = 6; break;
case QE_CLK19: source = 7; break;
case QE_CLK20: source = 8; break;
case QE_CLK15: source = 9; break;
case QE_CLK16: source = 10; break;
default: source = -1; break;
}
break;
case 3:
switch (clock) {
case QE_BRG9: source = 1; break;
case QE_BRG10: source = 2; break;
case QE_BRG15: source = 3; break;
case QE_BRG16: source = 4; break;
case QE_CLK3: source = 5; break;
case QE_CLK4: source = 6; break;
case QE_CLK17: source = 7; break;
case QE_CLK18: source = 8; break;
case QE_CLK7: source = 9; break;
case QE_CLK8: source = 10; break;
case QE_CLK16: source = 11; break;
default: source = -1; break;
}
break;
case 4:
switch (clock) {
case QE_BRG13: source = 1; break;
case QE_BRG14: source = 2; break;
case QE_BRG15: source = 3; break;
case QE_BRG16: source = 4; break;
case QE_CLK5: source = 5; break;
case QE_CLK6: source = 6; break;
case QE_CLK21: source = 7; break;
case QE_CLK22: source = 8; break;
case QE_CLK7: source = 9; break;
case QE_CLK8: source = 10; break;
case QE_CLK16: source = 11; break;
default: source = -1; break;
}
break;
default:
source = -1;
break;
}
if (source == -1) {
printf("%s: Bad combination of clock and UCC\n", __FUNCTION__);
return -ENOENT;
}
clockBits = (u32) source;
clockMask = QE_CMXUCR_TX_CLK_SRC_MASK;
if (mode == COMM_DIR_RX) {
clockBits <<= 4; /* Rx field is 4 bits to left of Tx field */
clockMask <<= 4; /* Rx field is 4 bits to left of Tx field */
}
clockBits <<= shift;
clockMask <<= shift;
out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clockMask) | clockBits);
return 0;
}
static uint ucc_get_reg_baseaddr(int ucc_num)
{
uint base = 0;
/* check if the UCC number is in range */
if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) {
printf("%s: the UCC num not in ranges\n", __FUNCTION__);
return 0;
}
switch (ucc_num) {
case 0: base = 0x00002000; break;
case 1: base = 0x00003000; break;
case 2: base = 0x00002200; break;
case 3: base = 0x00003200; break;
case 4: base = 0x00002400; break;
case 5: base = 0x00003400; break;
case 6: base = 0x00002600; break;
case 7: base = 0x00003600; break;
default: break;
}
base = (uint)qe_immr + base;
return base;
}
void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode)
{
ucc_fast_t *uf_regs;
u32 gumr;
uf_regs = uccf->uf_regs;
/* Enable reception and/or transmission on this UCC. */
gumr = in_be32(&uf_regs->gumr);
if (mode & COMM_DIR_TX) {
gumr |= UCC_FAST_GUMR_ENT;
uccf->enabled_tx = 1;
}
if (mode & COMM_DIR_RX) {
gumr |= UCC_FAST_GUMR_ENR;
uccf->enabled_rx = 1;
}
out_be32(&uf_regs->gumr, gumr);
}
void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode)
{
ucc_fast_t *uf_regs;
u32 gumr;
uf_regs = uccf->uf_regs;
/* Disable reception and/or transmission on this UCC. */
gumr = in_be32(&uf_regs->gumr);
if (mode & COMM_DIR_TX) {
gumr &= ~UCC_FAST_GUMR_ENT;
uccf->enabled_tx = 0;
}
if (mode & COMM_DIR_RX) {
gumr &= ~UCC_FAST_GUMR_ENR;
uccf->enabled_rx = 0;
}
out_be32(&uf_regs->gumr, gumr);
}
int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret)
{
ucc_fast_private_t *uccf;
ucc_fast_t *uf_regs;
if (!uf_info)
return -EINVAL;
if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
printf("%s: Illagal UCC number!\n", __FUNCTION__);
return -EINVAL;
}
uccf = (ucc_fast_private_t *)malloc(sizeof(ucc_fast_private_t));
if (!uccf) {
printf("%s: No memory for UCC fast data structure!\n",
__FUNCTION__);
return -ENOMEM;
}
memset(uccf, 0, sizeof(ucc_fast_private_t));
/* Save fast UCC structure */
uccf->uf_info = uf_info;
uccf->uf_regs = (ucc_fast_t *)ucc_get_reg_baseaddr(uf_info->ucc_num);
if (uccf->uf_regs == NULL) {
printf("%s: No memory map for UCC fast controller!\n",
__FUNCTION__);
return -ENOMEM;
}
uccf->enabled_tx = 0;
uccf->enabled_rx = 0;
uf_regs = uccf->uf_regs;
uccf->p_ucce = (u32 *) &(uf_regs->ucce);
uccf->p_uccm = (u32 *) &(uf_regs->uccm);
/* Init GUEMR register, UCC both Rx and Tx is Fast protocol */
out_8(&uf_regs->guemr, UCC_GUEMR_SET_RESERVED3 | UCC_GUEMR_MODE_FAST_RX
| UCC_GUEMR_MODE_FAST_TX);
/* Set GUMR, disable UCC both Rx and Tx, Ethernet protocol */
out_be32(&uf_regs->gumr, UCC_FAST_GUMR_ETH);
/* Set the Giga ethernet VFIFO stuff */
if (uf_info->eth_type == GIGA_ETH) {
/* Allocate memory for Tx Virtual Fifo */
uccf->ucc_fast_tx_virtual_fifo_base_offset =
qe_muram_alloc(UCC_GETH_UTFS_GIGA_INIT,
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
/* Allocate memory for Rx Virtual Fifo */
uccf->ucc_fast_rx_virtual_fifo_base_offset =
qe_muram_alloc(UCC_GETH_URFS_GIGA_INIT +
UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD,
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
/* utfb, urfb are offsets from MURAM base */
out_be32(&uf_regs->utfb,
uccf->ucc_fast_tx_virtual_fifo_base_offset);
out_be32(&uf_regs->urfb,
uccf->ucc_fast_rx_virtual_fifo_base_offset);
/* Set Virtual Fifo registers */
out_be16(&uf_regs->urfs, UCC_GETH_URFS_GIGA_INIT);
out_be16(&uf_regs->urfet, UCC_GETH_URFET_GIGA_INIT);
out_be16(&uf_regs->urfset, UCC_GETH_URFSET_GIGA_INIT);
out_be16(&uf_regs->utfs, UCC_GETH_UTFS_GIGA_INIT);
out_be16(&uf_regs->utfet, UCC_GETH_UTFET_GIGA_INIT);
out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_GIGA_INIT);
}
/* Set the Fast ethernet VFIFO stuff */
if (uf_info->eth_type == FAST_ETH) {
/* Allocate memory for Tx Virtual Fifo */
uccf->ucc_fast_tx_virtual_fifo_base_offset =
qe_muram_alloc(UCC_GETH_UTFS_INIT,
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
/* Allocate memory for Rx Virtual Fifo */
uccf->ucc_fast_rx_virtual_fifo_base_offset =
qe_muram_alloc(UCC_GETH_URFS_INIT +
UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD,
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
/* utfb, urfb are offsets from MURAM base */
out_be32(&uf_regs->utfb,
uccf->ucc_fast_tx_virtual_fifo_base_offset);
out_be32(&uf_regs->urfb,
uccf->ucc_fast_rx_virtual_fifo_base_offset);
/* Set Virtual Fifo registers */
out_be16(&uf_regs->urfs, UCC_GETH_URFS_INIT);
out_be16(&uf_regs->urfet, UCC_GETH_URFET_INIT);
out_be16(&uf_regs->urfset, UCC_GETH_URFSET_INIT);
out_be16(&uf_regs->utfs, UCC_GETH_UTFS_INIT);
out_be16(&uf_regs->utfet, UCC_GETH_UTFET_INIT);
out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_INIT);
}
/* Rx clock routing */
if (uf_info->rx_clock != QE_CLK_NONE) {
if (ucc_set_clk_src(uf_info->ucc_num,
uf_info->rx_clock, COMM_DIR_RX)) {
printf("%s: Illegal value for parameter 'RxClock'.\n",
__FUNCTION__);
return -EINVAL;
}
}
/* Tx clock routing */
if (uf_info->tx_clock != QE_CLK_NONE) {
if (ucc_set_clk_src(uf_info->ucc_num,
uf_info->tx_clock, COMM_DIR_TX)) {
printf("%s: Illegal value for parameter 'TxClock'.\n",
__FUNCTION__);
return -EINVAL;
}
}
/* Clear interrupt mask register to disable all of interrupts */
out_be32(&uf_regs->uccm, 0x0);
/* Writing '1' to clear all of envents */
out_be32(&uf_regs->ucce, 0xffffffff);
*uccf_ret = uccf;
return 0;
}
#endif /* CONFIG_QE */

130
drivers/qe/uccf.h Normal file
View File

@ -0,0 +1,130 @@
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
* based on source code of Shlomi Gridish
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __UCCF_H__
#define __UCCF_H__
#include "common.h"
#include "qe.h"
/* Fast or Giga ethernet
*/
typedef enum enet_type {
FAST_ETH,
GIGA_ETH,
} enet_type_e;
/* General UCC Extended Mode Register
*/
#define UCC_GUEMR_MODE_MASK_RX 0x02
#define UCC_GUEMR_MODE_MASK_TX 0x01
#define UCC_GUEMR_MODE_FAST_RX 0x02
#define UCC_GUEMR_MODE_FAST_TX 0x01
#define UCC_GUEMR_MODE_SLOW_RX 0x00
#define UCC_GUEMR_MODE_SLOW_TX 0x00
#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 must be set 1 */
/* General UCC FAST Mode Register
*/
#define UCC_FAST_GUMR_TCI 0x20000000
#define UCC_FAST_GUMR_TRX 0x10000000
#define UCC_FAST_GUMR_TTX 0x08000000
#define UCC_FAST_GUMR_CDP 0x04000000
#define UCC_FAST_GUMR_CTSP 0x02000000
#define UCC_FAST_GUMR_CDS 0x01000000
#define UCC_FAST_GUMR_CTSS 0x00800000
#define UCC_FAST_GUMR_TXSY 0x00020000
#define UCC_FAST_GUMR_RSYN 0x00010000
#define UCC_FAST_GUMR_RTSM 0x00002000
#define UCC_FAST_GUMR_REVD 0x00000400
#define UCC_FAST_GUMR_ENR 0x00000020
#define UCC_FAST_GUMR_ENT 0x00000010
/* GUMR [MODE] bit maps
*/
#define UCC_FAST_GUMR_HDLC 0x00000000
#define UCC_FAST_GUMR_QMC 0x00000002
#define UCC_FAST_GUMR_UART 0x00000004
#define UCC_FAST_GUMR_BISYNC 0x00000008
#define UCC_FAST_GUMR_ATM 0x0000000a
#define UCC_FAST_GUMR_ETH 0x0000000c
/* Transmit On Demand (UTORD)
*/
#define UCC_SLOW_TOD 0x8000
#define UCC_FAST_TOD 0x8000
/* Fast Ethernet (10/100 Mbps)
*/
#define UCC_GETH_URFS_INIT 512 /* Rx virtual FIFO size */
#define UCC_GETH_URFET_INIT 256 /* 1/2 urfs */
#define UCC_GETH_URFSET_INIT 384 /* 3/4 urfs */
#define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size */
#define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */
#define UCC_GETH_UTFTT_INIT 128
/* Gigabit Ethernet (1000 Mbps)
*/
#define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual FIFO size */
#define UCC_GETH_URFET_GIGA_INIT 2048/*1024*/ /* 1/2 urfs */
#define UCC_GETH_URFSET_GIGA_INIT 3072/*1536*/ /* 3/4 urfs */
#define UCC_GETH_UTFS_GIGA_INIT 8192/*2048*/ /* Tx virtual FIFO size */
#define UCC_GETH_UTFET_GIGA_INIT 4096/*1024*/ /* 1/2 utfs */
#define UCC_GETH_UTFTT_GIGA_INIT 0x400/*0x40*/ /* */
/* UCC fast alignment
*/
#define UCC_FAST_RX_ALIGN 4
#define UCC_FAST_MRBLR_ALIGNMENT 4
#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
/* Sizes
*/
#define UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD 8
/* UCC fast structure.
*/
typedef struct ucc_fast_info {
int ucc_num;
qe_clock_e rx_clock;
qe_clock_e tx_clock;
enet_type_e eth_type;
} ucc_fast_info_t;
typedef struct ucc_fast_private {
ucc_fast_info_t *uf_info;
ucc_fast_t *uf_regs; /* a pointer to memory map of UCC regs */
u32 *p_ucce; /* a pointer to the event register */
u32 *p_uccm; /* a pointer to the mask register */
int enabled_tx; /* whether UCC is enabled for Tx (ENT) */
int enabled_rx; /* whether UCC is enabled for Rx (ENR) */
u32 ucc_fast_tx_virtual_fifo_base_offset;
u32 ucc_fast_rx_virtual_fifo_base_offset;
} ucc_fast_private_t;
void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf);
u32 ucc_fast_get_qe_cr_subblock(int ucc_num);
void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode);
void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode);
int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret);
#endif /* __UCCF_H__ */

1266
drivers/qe/uec.c Normal file
View File

File diff suppressed because it is too large Load Diff

716
drivers/qe/uec.h Normal file
View File

@ -0,0 +1,716 @@
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
* based on source code of Shlomi Gridish
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __UEC_H__
#define __UEC_H__
#define MAX_TX_THREADS 8
#define MAX_RX_THREADS 8
#define MAX_TX_QUEUES 8
#define MAX_RX_QUEUES 8
#define MAX_PREFETCHED_BDS 4
#define MAX_IPH_OFFSET_ENTRY 8
#define MAX_ENET_INIT_PARAM_ENTRIES_RX 9
#define MAX_ENET_INIT_PARAM_ENTRIES_TX 8
/* UEC UPSMR (Protocol Specific Mode Register)
*/
#define UPSMR_ECM 0x04000000 /* Enable CAM Miss */
#define UPSMR_HSE 0x02000000 /* Hardware Statistics Enable */
#define UPSMR_PRO 0x00400000 /* Promiscuous */
#define UPSMR_CAP 0x00200000 /* CAM polarity */
#define UPSMR_RSH 0x00100000 /* Receive Short Frames */
#define UPSMR_RPM 0x00080000 /* Reduced Pin Mode interfaces */
#define UPSMR_R10M 0x00040000 /* RGMII/RMII 10 Mode */
#define UPSMR_RLPB 0x00020000 /* RMII Loopback Mode */
#define UPSMR_TBIM 0x00010000 /* Ten-bit Interface Mode */
#define UPSMR_RMM 0x00001000 /* RMII/RGMII Mode */
#define UPSMR_CAM 0x00000400 /* CAM Address Matching */
#define UPSMR_BRO 0x00000200 /* Broadcast Address */
#define UPSMR_RES1 0x00002000 /* Reserved feild - must be 1 */
#define UPSMR_INIT_VALUE (UPSMR_HSE | UPSMR_RES1)
/* UEC MACCFG1 (MAC Configuration 1 Register)
*/
#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control Rx */
#define MACCFG1_FLOW_TX 0x00000010 /* Flow Control Tx */
#define MACCFG1_ENABLE_SYNCHED_RX 0x00000008 /* Enable Rx Sync */
#define MACCFG1_ENABLE_RX 0x00000004 /* Enable Rx */
#define MACCFG1_ENABLE_SYNCHED_TX 0x00000002 /* Enable Tx Sync */
#define MACCFG1_ENABLE_TX 0x00000001 /* Enable Tx */
#define MACCFG1_INIT_VALUE (0)
/* UEC MACCFG2 (MAC Configuration 2 Register)
*/
#define MACCFG2_PREL 0x00007000
#define MACCFG2_PREL_SHIFT (31 - 19)
#define MACCFG2_PREL_MASK 0x0000f000
#define MACCFG2_SRP 0x00000080
#define MACCFG2_STP 0x00000040
#define MACCFG2_RESERVED_1 0x00000020 /* must be set */
#define MACCFG2_LC 0x00000010 /* Length Check */
#define MACCFG2_MPE 0x00000008
#define MACCFG2_FDX 0x00000001 /* Full Duplex */
#define MACCFG2_FDX_MASK 0x00000001
#define MACCFG2_PAD_CRC 0x00000004
#define MACCFG2_CRC_EN 0x00000002
#define MACCFG2_PAD_AND_CRC_MODE_NONE 0x00000000
#define MACCFG2_PAD_AND_CRC_MODE_CRC_ONLY 0x00000002
#define MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC 0x00000004
#define MACCFG2_INTERFACE_MODE_NIBBLE 0x00000100
#define MACCFG2_INTERFACE_MODE_BYTE 0x00000200
#define MACCFG2_INTERFACE_MODE_MASK 0x00000300
#define MACCFG2_INIT_VALUE (MACCFG2_PREL | MACCFG2_RESERVED_1 | \
MACCFG2_LC | MACCFG2_PAD_CRC | MACCFG2_FDX)
/* UEC Event Register
*/
#define UCCE_MPD 0x80000000
#define UCCE_SCAR 0x40000000
#define UCCE_GRA 0x20000000
#define UCCE_CBPR 0x10000000
#define UCCE_BSY 0x08000000
#define UCCE_RXC 0x04000000
#define UCCE_TXC 0x02000000
#define UCCE_TXE 0x01000000
#define UCCE_TXB7 0x00800000
#define UCCE_TXB6 0x00400000
#define UCCE_TXB5 0x00200000
#define UCCE_TXB4 0x00100000
#define UCCE_TXB3 0x00080000
#define UCCE_TXB2 0x00040000
#define UCCE_TXB1 0x00020000
#define UCCE_TXB0 0x00010000
#define UCCE_RXB7 0x00008000
#define UCCE_RXB6 0x00004000
#define UCCE_RXB5 0x00002000
#define UCCE_RXB4 0x00001000
#define UCCE_RXB3 0x00000800
#define UCCE_RXB2 0x00000400
#define UCCE_RXB1 0x00000200
#define UCCE_RXB0 0x00000100
#define UCCE_RXF7 0x00000080
#define UCCE_RXF6 0x00000040
#define UCCE_RXF5 0x00000020
#define UCCE_RXF4 0x00000010
#define UCCE_RXF3 0x00000008
#define UCCE_RXF2 0x00000004
#define UCCE_RXF1 0x00000002
#define UCCE_RXF0 0x00000001
#define UCCE_TXB (UCCE_TXB7 | UCCE_TXB6 | UCCE_TXB5 | UCCE_TXB4 | \
UCCE_TXB3 | UCCE_TXB2 | UCCE_TXB1 | UCCE_TXB0)
#define UCCE_RXB (UCCE_RXB7 | UCCE_RXB6 | UCCE_RXB5 | UCCE_RXB4 | \
UCCE_RXB3 | UCCE_RXB2 | UCCE_RXB1 | UCCE_RXB0)
#define UCCE_RXF (UCCE_RXF7 | UCCE_RXF6 | UCCE_RXF5 | UCCE_RXF4 | \
UCCE_RXF3 | UCCE_RXF2 | UCCE_RXF1 | UCCE_RXF0)
#define UCCE_OTHER (UCCE_SCAR | UCCE_GRA | UCCE_CBPR | UCCE_BSY | \
UCCE_RXC | UCCE_TXC | UCCE_TXE)
/* UEC TEMODR Register
*/
#define TEMODER_SCHEDULER_ENABLE 0x2000
#define TEMODER_IP_CHECKSUM_GENERATE 0x0400
#define TEMODER_PERFORMANCE_OPTIMIZATION_MODE1 0x0200
#define TEMODER_RMON_STATISTICS 0x0100
#define TEMODER_NUM_OF_QUEUES_SHIFT (15-15)
#define TEMODER_INIT_VALUE 0xc000
/* UEC REMODR Register
*/
#define REMODER_RX_RMON_STATISTICS_ENABLE 0x00001000
#define REMODER_RX_EXTENDED_FEATURES 0x80000000
#define REMODER_VLAN_OPERATION_TAGGED_SHIFT (31-9 )
#define REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT (31-10)
#define REMODER_RX_QOS_MODE_SHIFT (31-15)
#define REMODER_RMON_STATISTICS 0x00001000
#define REMODER_RX_EXTENDED_FILTERING 0x00000800
#define REMODER_NUM_OF_QUEUES_SHIFT (31-23)
#define REMODER_DYNAMIC_MAX_FRAME_LENGTH 0x00000008
#define REMODER_DYNAMIC_MIN_FRAME_LENGTH 0x00000004
#define REMODER_IP_CHECKSUM_CHECK 0x00000002
#define REMODER_IP_ADDRESS_ALIGNMENT 0x00000001
#define REMODER_INIT_VALUE 0
/* BMRx - Bus Mode Register */
#define BMR_GLB 0x20
#define BMR_BO_BE 0x10
#define BMR_DTB_SECONDARY_BUS 0x02
#define BMR_BDB_SECONDARY_BUS 0x01
#define BMR_SHIFT 24
#define BMR_INIT_VALUE (BMR_GLB | BMR_BO_BE)
/* UEC UCCS (Ethernet Status Register)
*/
#define UCCS_BPR 0x02
#define UCCS_PAU 0x02
#define UCCS_MPD 0x01
/* UEC MIIMCFG (MII Management Configuration Register)
*/
#define MIIMCFG_RESET_MANAGEMENT 0x80000000
#define MIIMCFG_NO_PREAMBLE 0x00000010
#define MIIMCFG_CLOCK_DIVIDE_SHIFT (31 - 31)
#define MIIMCFG_CLOCK_DIVIDE_MASK 0x0000000f
#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_4 0x00000001
#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_6 0x00000002
#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_8 0x00000003
#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10 0x00000004
#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_14 0x00000005
#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_20 0x00000006
#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_28 0x00000007
#define MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE \
MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10
/* UEC MIIMCOM (MII Management Command Register)
*/
#define MIIMCOM_SCAN_CYCLE 0x00000002 /* Scan cycle */
#define MIIMCOM_READ_CYCLE 0x00000001 /* Read cycle */
/* UEC MIIMADD (MII Management Address Register)
*/
#define MIIMADD_PHY_ADDRESS_SHIFT (31 - 23)
#define MIIMADD_PHY_REGISTER_SHIFT (31 - 31)
/* UEC MIIMCON (MII Management Control Register)
*/
#define MIIMCON_PHY_CONTROL_SHIFT (31 - 31)
#define MIIMCON_PHY_STATUS_SHIFT (31 - 31)
/* UEC MIIMIND (MII Management Indicator Register)
*/
#define MIIMIND_NOT_VALID 0x00000004
#define MIIMIND_SCAN 0x00000002
#define MIIMIND_BUSY 0x00000001
/* UEC UTBIPAR (Ten Bit Interface Physical Address Register)
*/
#define UTBIPAR_PHY_ADDRESS_SHIFT (31 - 31)
#define UTBIPAR_PHY_ADDRESS_MASK 0x0000001f
/* UEC UESCR (Ethernet Statistics Control Register)
*/
#define UESCR_AUTOZ 0x8000
#define UESCR_CLRCNT 0x4000
#define UESCR_MAXCOV_SHIFT (15 - 7)
#define UESCR_SCOV_SHIFT (15 - 15)
/****** Tx data struct collection ******/
/* Tx thread data, each Tx thread has one this struct.
*/
typedef struct uec_thread_data_tx {
u8 res0[136];
} __attribute__ ((packed)) uec_thread_data_tx_t;
/* Tx thread parameter, each Tx thread has one this struct.
*/
typedef struct uec_thread_tx_pram {
u8 res0[64];
} __attribute__ ((packed)) uec_thread_tx_pram_t;
/* Send queue queue-descriptor, each Tx queue has one this QD
*/
typedef struct uec_send_queue_qd {
u32 bd_ring_base; /* pointer to BD ring base address */
u8 res0[0x8];
u32 last_bd_completed_address; /* last entry in BD ring */
u8 res1[0x30];
} __attribute__ ((packed)) uec_send_queue_qd_t;
/* Send queue memory region */
typedef struct uec_send_queue_mem_region {
uec_send_queue_qd_t sqqd[MAX_TX_QUEUES];
} __attribute__ ((packed)) uec_send_queue_mem_region_t;
/* Scheduler struct
*/
typedef struct uec_scheduler {
u16 cpucount0; /* CPU packet counter */
u16 cpucount1; /* CPU packet counter */
u16 cecount0; /* QE packet counter */
u16 cecount1; /* QE packet counter */
u16 cpucount2; /* CPU packet counter */
u16 cpucount3; /* CPU packet counter */
u16 cecount2; /* QE packet counter */
u16 cecount3; /* QE packet counter */
u16 cpucount4; /* CPU packet counter */
u16 cpucount5; /* CPU packet counter */
u16 cecount4; /* QE packet counter */
u16 cecount5; /* QE packet counter */
u16 cpucount6; /* CPU packet counter */
u16 cpucount7; /* CPU packet counter */
u16 cecount6; /* QE packet counter */
u16 cecount7; /* QE packet counter */
u32 weightstatus[MAX_TX_QUEUES]; /* accumulated weight factor */
u32 rtsrshadow; /* temporary variable handled by QE */
u32 time; /* temporary variable handled by QE */
u32 ttl; /* temporary variable handled by QE */
u32 mblinterval; /* max burst length interval */
u16 nortsrbytetime; /* normalized value of byte time in tsr units */
u8 fracsiz;
u8 res0[1];
u8 strictpriorityq; /* Strict Priority Mask register */
u8 txasap; /* Transmit ASAP register */
u8 extrabw; /* Extra BandWidth register */
u8 oldwfqmask; /* temporary variable handled by QE */
u8 weightfactor[MAX_TX_QUEUES]; /**< weight factor for queues */
u32 minw; /* temporary variable handled by QE */
u8 res1[0x70-0x64];
} __attribute__ ((packed)) uec_scheduler_t;
/* Tx firmware counters
*/
typedef struct uec_tx_firmware_statistics_pram {
u32 sicoltx; /* single collision */
u32 mulcoltx; /* multiple collision */
u32 latecoltxfr; /* late collision */
u32 frabortduecol; /* frames aborted due to tx collision */
u32 frlostinmactxer; /* frames lost due to internal MAC error tx */
u32 carriersenseertx; /* carrier sense error */
u32 frtxok; /* frames transmitted OK */
u32 txfrexcessivedefer;
u32 txpkts256; /* total packets(including bad) 256~511 B */
u32 txpkts512; /* total packets(including bad) 512~1023B */
u32 txpkts1024; /* total packets(including bad) 1024~1518B */
u32 txpktsjumbo; /* total packets(including bad) >1024 */
} __attribute__ ((packed)) uec_tx_firmware_statistics_pram_t;
/* Tx global parameter table
*/
typedef struct uec_tx_global_pram {
u16 temoder;
u8 res0[0x38-0x02];
u32 sqptr;
u32 schedulerbasepointer;
u32 txrmonbaseptr;
u32 tstate;
u8 iphoffset[MAX_IPH_OFFSET_ENTRY];
u32 vtagtable[0x8];
u32 tqptr;
u8 res2[0x80-0x74];
} __attribute__ ((packed)) uec_tx_global_pram_t;
/****** Rx data struct collection ******/
/* Rx thread data, each Rx thread has one this struct.
*/
typedef struct uec_thread_data_rx {
u8 res0[40];
} __attribute__ ((packed)) uec_thread_data_rx_t;
/* Rx thread parameter, each Rx thread has one this struct.
*/
typedef struct uec_thread_rx_pram {
u8 res0[128];
} __attribute__ ((packed)) uec_thread_rx_pram_t;
/* Rx firmware counters
*/
typedef struct uec_rx_firmware_statistics_pram {
u32 frrxfcser; /* frames with crc error */
u32 fraligner; /* frames with alignment error */
u32 inrangelenrxer; /* in range length error */
u32 outrangelenrxer; /* out of range length error */
u32 frtoolong; /* frame too long */
u32 runt; /* runt */
u32 verylongevent; /* very long event */
u32 symbolerror; /* symbol error */
u32 dropbsy; /* drop because of BD not ready */
u8 res0[0x8];
u32 mismatchdrop; /* drop because of MAC filtering */
u32 underpkts; /* total frames less than 64 octets */
u32 pkts256; /* total frames(including bad)256~511 B */
u32 pkts512; /* total frames(including bad)512~1023 B */
u32 pkts1024; /* total frames(including bad)1024~1518 B */
u32 pktsjumbo; /* total frames(including bad) >1024 B */
u32 frlossinmacer;
u32 pausefr; /* pause frames */
u8 res1[0x4];
u32 removevlan;
u32 replacevlan;
u32 insertvlan;
} __attribute__ ((packed)) uec_rx_firmware_statistics_pram_t;
/* Rx interrupt coalescing entry, each Rx queue has one this entry.
*/
typedef struct uec_rx_interrupt_coalescing_entry {
u32 maxvalue;
u32 counter;
} __attribute__ ((packed)) uec_rx_interrupt_coalescing_entry_t;
typedef struct uec_rx_interrupt_coalescing_table {
uec_rx_interrupt_coalescing_entry_t entry[MAX_RX_QUEUES];
} __attribute__ ((packed)) uec_rx_interrupt_coalescing_table_t;
/* RxBD queue entry, each Rx queue has one this entry.
*/
typedef struct uec_rx_bd_queues_entry {
u32 bdbaseptr; /* BD base pointer */
u32 bdptr; /* BD pointer */
u32 externalbdbaseptr; /* external BD base pointer */
u32 externalbdptr; /* external BD pointer */
} __attribute__ ((packed)) uec_rx_bd_queues_entry_t;
/* Rx global paramter table
*/
typedef struct uec_rx_global_pram {
u32 remoder; /* ethernet mode reg. */
u32 rqptr; /* base pointer to the Rx Queues */
u32 res0[0x1];
u8 res1[0x20-0xC];
u16 typeorlen;
u8 res2[0x1];
u8 rxgstpack; /* ack on GRACEFUL STOP RX command */
u32 rxrmonbaseptr; /* Rx RMON statistics base */
u8 res3[0x30-0x28];
u32 intcoalescingptr; /* Interrupt coalescing table pointer */
u8 res4[0x36-0x34];
u8 rstate;
u8 res5[0x46-0x37];
u16 mrblr; /* max receive buffer length reg. */
u32 rbdqptr; /* RxBD parameter table description */
u16 mflr; /* max frame length reg. */
u16 minflr; /* min frame length reg. */
u16 maxd1; /* max dma1 length reg. */
u16 maxd2; /* max dma2 length reg. */
u32 ecamptr; /* external CAM address */
u32 l2qt; /* VLAN priority mapping table. */
u32 l3qt[0x8]; /* IP priority mapping table. */
u16 vlantype; /* vlan type */
u16 vlantci; /* default vlan tci */
u8 addressfiltering[64];/* address filtering data structure */
u32 exfGlobalParam; /* extended filtering global parameters */
u8 res6[0x100-0xC4]; /* Initialize to zero */
} __attribute__ ((packed)) uec_rx_global_pram_t;
#define GRACEFUL_STOP_ACKNOWLEDGE_RX 0x01
/****** UEC common ******/
/* UCC statistics - hardware counters
*/
typedef struct uec_hardware_statistics {
u32 tx64;
u32 tx127;
u32 tx255;
u32 rx64;
u32 rx127;
u32 rx255;
u32 txok;
u16 txcf;
u32 tmca;
u32 tbca;
u32 rxfok;
u32 rxbok;
u32 rbyt;
u32 rmca;
u32 rbca;
} __attribute__ ((packed)) uec_hardware_statistics_t;
/* InitEnet command parameter
*/
typedef struct uec_init_cmd_pram {
u8 resinit0;
u8 resinit1;
u8 resinit2;
u8 resinit3;
u16 resinit4;
u8 res1[0x1];
u8 largestexternallookupkeysize;
u32 rgftgfrxglobal;
u32 rxthread[MAX_ENET_INIT_PARAM_ENTRIES_RX]; /* rx threads */
u8 res2[0x38 - 0x30];
u32 txglobal; /* tx global */
u32 txthread[MAX_ENET_INIT_PARAM_ENTRIES_TX]; /* tx threads */
u8 res3[0x1];
} __attribute__ ((packed)) uec_init_cmd_pram_t;
#define ENET_INIT_PARAM_RGF_SHIFT (32 - 4)
#define ENET_INIT_PARAM_TGF_SHIFT (32 - 8)
#define ENET_INIT_PARAM_RISC_MASK 0x0000003f
#define ENET_INIT_PARAM_PTR_MASK 0x00ffffc0
#define ENET_INIT_PARAM_SNUM_MASK 0xff000000
#define ENET_INIT_PARAM_SNUM_SHIFT 24
#define ENET_INIT_PARAM_MAGIC_RES_INIT0 0x06
#define ENET_INIT_PARAM_MAGIC_RES_INIT1 0x30
#define ENET_INIT_PARAM_MAGIC_RES_INIT2 0xff
#define ENET_INIT_PARAM_MAGIC_RES_INIT3 0x00
#define ENET_INIT_PARAM_MAGIC_RES_INIT4 0x0400
/* structure representing 82xx Address Filtering Enet Address in PRAM
*/
typedef struct uec_82xx_enet_address {
u8 res1[0x2];
u16 h; /* address (MSB) */
u16 m; /* address */
u16 l; /* address (LSB) */
} __attribute__ ((packed)) uec_82xx_enet_address_t;
/* structure representing 82xx Address Filtering PRAM
*/
typedef struct uec_82xx_address_filtering_pram {
u32 iaddr_h; /* individual address filter, high */
u32 iaddr_l; /* individual address filter, low */
u32 gaddr_h; /* group address filter, high */
u32 gaddr_l; /* group address filter, low */
uec_82xx_enet_address_t taddr;
uec_82xx_enet_address_t paddr[4];
u8 res0[0x40-0x38];
} __attribute__ ((packed)) uec_82xx_address_filtering_pram_t;
/* Buffer Descriptor
*/
typedef struct buffer_descriptor {
u16 status;
u16 len;
u32 data;
} __attribute__ ((packed)) qe_bd_t, *p_bd_t;
#define SIZEOFBD sizeof(qe_bd_t)
/* Common BD flags
*/
#define BD_WRAP 0x2000
#define BD_INT 0x1000
#define BD_LAST 0x0800
#define BD_CLEAN 0x3000
/* TxBD status flags
*/
#define TxBD_READY 0x8000
#define TxBD_PADCRC 0x4000
#define TxBD_WRAP BD_WRAP
#define TxBD_INT BD_INT
#define TxBD_LAST BD_LAST
#define TxBD_TXCRC 0x0400
#define TxBD_DEF 0x0200
#define TxBD_PP 0x0100
#define TxBD_LC 0x0080
#define TxBD_RL 0x0040
#define TxBD_RC 0x003C
#define TxBD_UNDERRUN 0x0002
#define TxBD_TRUNC 0x0001
#define TxBD_ERROR (TxBD_UNDERRUN | TxBD_TRUNC)
/* RxBD status flags
*/
#define RxBD_EMPTY 0x8000
#define RxBD_OWNER 0x4000
#define RxBD_WRAP BD_WRAP
#define RxBD_INT BD_INT
#define RxBD_LAST BD_LAST
#define RxBD_FIRST 0x0400
#define RxBD_CMR 0x0200
#define RxBD_MISS 0x0100
#define RxBD_BCAST 0x0080
#define RxBD_MCAST 0x0040
#define RxBD_LG 0x0020
#define RxBD_NO 0x0010
#define RxBD_SHORT 0x0008
#define RxBD_CRCERR 0x0004
#define RxBD_OVERRUN 0x0002
#define RxBD_IPCH 0x0001
#define RxBD_ERROR (RxBD_LG | RxBD_NO | RxBD_SHORT | \
RxBD_CRCERR | RxBD_OVERRUN)
/* BD access macros
*/
#define BD_STATUS(_bd) (((p_bd_t)(_bd))->status)
#define BD_STATUS_SET(_bd, _val) (((p_bd_t)(_bd))->status = _val)
#define BD_LENGTH(_bd) (((p_bd_t)(_bd))->len)
#define BD_LENGTH_SET(_bd, _val) (((p_bd_t)(_bd))->len = _val)
#define BD_DATA_CLEAR(_bd) (((p_bd_t)(_bd))->data = 0)
#define BD_IS_DATA(_bd) (((p_bd_t)(_bd))->data)
#define BD_DATA(_bd) ((u8 *)(((p_bd_t)(_bd))->data))
#define BD_DATA_SET(_bd, _data) (((p_bd_t)(_bd))->data = (u32)(_data))
#define BD_ADVANCE(_bd,_status,_base) \
(((_status) & BD_WRAP) ? (_bd) = ((p_bd_t)(_base)) : ++(_bd))
/* Rx Prefetched BDs
*/
typedef struct uec_rx_prefetched_bds {
qe_bd_t bd[MAX_PREFETCHED_BDS]; /* prefetched bd */
} __attribute__ ((packed)) uec_rx_prefetched_bds_t;
/* Alignments
*/
#define UEC_RX_GLOBAL_PRAM_ALIGNMENT 64
#define UEC_TX_GLOBAL_PRAM_ALIGNMENT 64
#define UEC_THREAD_RX_PRAM_ALIGNMENT 128
#define UEC_THREAD_TX_PRAM_ALIGNMENT 64
#define UEC_THREAD_DATA_ALIGNMENT 256
#define UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT 32
#define UEC_SCHEDULER_ALIGNMENT 4
#define UEC_TX_STATISTICS_ALIGNMENT 4
#define UEC_RX_STATISTICS_ALIGNMENT 4
#define UEC_RX_INTERRUPT_COALESCING_ALIGNMENT 4
#define UEC_RX_BD_QUEUES_ALIGNMENT 8
#define UEC_RX_PREFETCHED_BDS_ALIGNMENT 128
#define UEC_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 4
#define UEC_RX_BD_RING_ALIGNMENT 32
#define UEC_TX_BD_RING_ALIGNMENT 32
#define UEC_MRBLR_ALIGNMENT 128
#define UEC_RX_BD_RING_SIZE_ALIGNMENT 4
#define UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT 32
#define UEC_RX_DATA_BUF_ALIGNMENT 64
#define UEC_VLAN_PRIORITY_MAX 8
#define UEC_IP_PRIORITY_MAX 64
#define UEC_TX_VTAG_TABLE_ENTRY_MAX 8
#define UEC_RX_BD_RING_SIZE_MIN 8
#define UEC_TX_BD_RING_SIZE_MIN 2
/* Ethernet speed
*/
typedef enum enet_speed {
ENET_SPEED_10BT, /* 10 Base T */
ENET_SPEED_100BT, /* 100 Base T */
ENET_SPEED_1000BT /* 1000 Base T */
} enet_speed_e;
/* Ethernet Address Type.
*/
typedef enum enet_addr_type {
ENET_ADDR_TYPE_INDIVIDUAL,
ENET_ADDR_TYPE_GROUP,
ENET_ADDR_TYPE_BROADCAST
} enet_addr_type_e;
/* TBI / MII Set Register
*/
typedef enum enet_tbi_mii_reg {
ENET_TBI_MII_CR = 0x00,
ENET_TBI_MII_SR = 0x01,
ENET_TBI_MII_ANA = 0x04,
ENET_TBI_MII_ANLPBPA = 0x05,
ENET_TBI_MII_ANEX = 0x06,
ENET_TBI_MII_ANNPT = 0x07,
ENET_TBI_MII_ANLPANP = 0x08,
ENET_TBI_MII_EXST = 0x0F,
ENET_TBI_MII_JD = 0x10,
ENET_TBI_MII_TBICON = 0x11
} enet_tbi_mii_reg_e;
/* UEC number of threads
*/
typedef enum uec_num_of_threads {
UEC_NUM_OF_THREADS_1 = 0x1, /* 1 */
UEC_NUM_OF_THREADS_2 = 0x2, /* 2 */
UEC_NUM_OF_THREADS_4 = 0x0, /* 4 */
UEC_NUM_OF_THREADS_6 = 0x3, /* 6 */
UEC_NUM_OF_THREADS_8 = 0x4 /* 8 */
} uec_num_of_threads_e;
/* UEC ethernet interface type
*/
typedef enum enet_interface {
ENET_10_MII,
ENET_10_RMII,
ENET_10_RGMII,
ENET_100_MII,
ENET_100_RMII,
ENET_100_RGMII,
ENET_1000_GMII,
ENET_1000_RGMII,
ENET_1000_TBI,
ENET_1000_RTBI
} enet_interface_e;
/* UEC initialization info struct
*/
typedef struct uec_info {
ucc_fast_info_t uf_info;
uec_num_of_threads_e num_threads_tx;
uec_num_of_threads_e num_threads_rx;
qe_risc_allocation_e riscTx;
qe_risc_allocation_e riscRx;
u16 rx_bd_ring_len;
u16 tx_bd_ring_len;
u8 phy_address;
enet_interface_e enet_interface;
} uec_info_t;
/* UEC driver initialized info
*/
#define MAX_RXBUF_LEN 1536
#define MAX_FRAME_LEN 1518
#define MIN_FRAME_LEN 64
#define MAX_DMA1_LEN 1520
#define MAX_DMA2_LEN 1520
/* UEC driver private struct
*/
typedef struct uec_private {
uec_info_t *uec_info;
ucc_fast_private_t *uccf;
struct eth_device *dev;
uec_t *uec_regs;
/* enet init command parameter */
uec_init_cmd_pram_t *p_init_enet_param;
u32 init_enet_param_offset;
/* Rx and Tx paramter */
uec_rx_global_pram_t *p_rx_glbl_pram;
u32 rx_glbl_pram_offset;
uec_tx_global_pram_t *p_tx_glbl_pram;
u32 tx_glbl_pram_offset;
uec_send_queue_mem_region_t *p_send_q_mem_reg;
u32 send_q_mem_reg_offset;
uec_thread_data_tx_t *p_thread_data_tx;
u32 thread_dat_tx_offset;
uec_thread_data_rx_t *p_thread_data_rx;
u32 thread_dat_rx_offset;
uec_rx_bd_queues_entry_t *p_rx_bd_qs_tbl;
u32 rx_bd_qs_tbl_offset;
/* BDs specific */
u8 *p_tx_bd_ring;
u32 tx_bd_ring_offset;
u8 *p_rx_bd_ring;
u32 rx_bd_ring_offset;
u8 *p_rx_buf;
u32 rx_buf_offset;
volatile qe_bd_t *txBd;
volatile qe_bd_t *rxBd;
/* Status */
int mac_tx_enabled;
int mac_rx_enabled;
int grace_stopped_tx;
int grace_stopped_rx;
int the_first_run;
/* PHY specific */
struct uec_mii_info *mii_info;
int oldspeed;
int oldduplex;
int oldlink;
} uec_private_t;
#endif /* __UEC_H__ */

604
drivers/qe/uec_phy.c Normal file
View File

@ -0,0 +1,604 @@
/*
* Copyright (C) 2005 Freescale Semiconductor, Inc.
*
* Author: Shlomi Gridish
*
* Description: UCC GETH Driver -- PHY handling
* Driver for UEC on QE
* Based on 8260_io/fcc_enet.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include "common.h"
#include "net.h"
#include "malloc.h"
#include "asm/errno.h"
#include "asm/immap_qe.h"
#include "asm/io.h"
#include "qe.h"
#include "uccf.h"
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
#if defined(CONFIG_QE)
#define UEC_VERBOSE_DEBUG
#define ugphy_printk(format, arg...) \
printf(format "\n", ## arg)
#define ugphy_dbg(format, arg...) \
ugphy_printk(format , ## arg)
#define ugphy_err(format, arg...) \
ugphy_printk(format , ## arg)
#define ugphy_info(format, arg...) \
ugphy_printk(format , ## arg)
#define ugphy_warn(format, arg...) \
ugphy_printk(format , ## arg)
#ifdef UEC_VERBOSE_DEBUG
#define ugphy_vdbg ugphy_dbg
#else
#define ugphy_vdbg(ugeth, fmt, args...) do { } while (0)
#endif /* UEC_VERBOSE_DEBUG */
static void config_genmii_advert(struct uec_mii_info *mii_info);
static void genmii_setup_forced(struct uec_mii_info *mii_info);
static void genmii_restart_aneg(struct uec_mii_info *mii_info);
static int gbit_config_aneg(struct uec_mii_info *mii_info);
static int genmii_config_aneg(struct uec_mii_info *mii_info);
static int genmii_update_link(struct uec_mii_info *mii_info);
static int genmii_read_status(struct uec_mii_info *mii_info);
u16 phy_read(struct uec_mii_info *mii_info, u16 regnum);
void phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val);
/* Write value to the PHY for this device to the register at regnum, */
/* waiting until the write is done before it returns. All PHY */
/* configuration has to be done through the TSEC1 MIIM regs */
void write_phy_reg(struct eth_device *dev, int mii_id, int regnum, int value)
{
uec_private_t *ugeth = (uec_private_t *)dev->priv;
uec_t *ug_regs;
enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e)regnum;
u32 tmp_reg;
ug_regs = ugeth->uec_regs;
/* Stop the MII management read cycle */
out_be32(&ug_regs->miimcom, 0);
/* Setting up the MII Mangement Address Register */
tmp_reg = ((u32)mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
out_be32(&ug_regs->miimadd, tmp_reg);
/* Setting up the MII Mangement Control Register with the value */
out_be32(&ug_regs->miimcon, (u32)value);
/* Wait till MII management write is complete */
while((in_be32(&ug_regs->miimind)) & MIIMIND_BUSY);
udelay(100000);
}
/* Reads from register regnum in the PHY for device dev, */
/* returning the value. Clears miimcom first. All PHY */
/* configuration has to be done through the TSEC1 MIIM regs */
int read_phy_reg(struct eth_device *dev, int mii_id, int regnum)
{
uec_private_t *ugeth = (uec_private_t *)dev->priv;
uec_t *ug_regs;
enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e)regnum;
u32 tmp_reg;
u16 value;
ug_regs = ugeth->uec_regs;
/* Setting up the MII Mangement Address Register */
tmp_reg = ((u32)mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg ;
out_be32(&ug_regs->miimadd, tmp_reg);
/* Perform an MII management read cycle */
out_be32(&ug_regs->miimcom, 0);
out_be32(&ug_regs->miimcom, MIIMCOM_READ_CYCLE);
/* Wait till MII management write is complete */
while((in_be32(&ug_regs->miimind)) & (MIIMIND_NOT_VALID | MIIMIND_BUSY));
udelay(100000);
/* Read MII management status */
value = (u16)in_be32(&ug_regs->miimstat);
if(value == 0xffff)
ugphy_warn("read wrong value : mii_id %d,mii_reg %d, base %08x",
mii_id, mii_reg, (u32) &(ug_regs->miimcfg));
return (value);
}
void mii_clear_phy_interrupt(struct uec_mii_info *mii_info)
{
if(mii_info->phyinfo->ack_interrupt)
mii_info->phyinfo->ack_interrupt(mii_info);
}
void mii_configure_phy_interrupt(struct uec_mii_info *mii_info, u32 interrupts)
{
mii_info->interrupts = interrupts;
if(mii_info->phyinfo->config_intr)
mii_info->phyinfo->config_intr(mii_info);
}
/* Writes MII_ADVERTISE with the appropriate values, after
* sanitizing advertise to make sure only supported features
* are advertised
*/
static void config_genmii_advert(struct uec_mii_info *mii_info)
{
u32 advertise;
u16 adv;
/* Only allow advertising what this PHY supports */
mii_info->advertising &= mii_info->phyinfo->features;
advertise = mii_info->advertising;
/* Setup standard advertisement */
adv = phy_read(mii_info, PHY_ANAR);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
if (advertise & ADVERTISED_10baseT_Full)
adv |= ADVERTISE_10FULL;
if (advertise & ADVERTISED_100baseT_Half)
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
phy_write(mii_info, PHY_ANAR, adv);
}
static void genmii_setup_forced(struct uec_mii_info *mii_info)
{
u16 ctrl;
u32 features = mii_info->phyinfo->features;
ctrl = phy_read(mii_info, PHY_BMCR);
ctrl &= ~(PHY_BMCR_DPLX|PHY_BMCR_100_MBPS|
PHY_BMCR_1000_MBPS|PHY_BMCR_AUTON);
ctrl |= PHY_BMCR_RESET;
switch(mii_info->speed) {
case SPEED_1000:
if(features & (SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full)) {
ctrl |= PHY_BMCR_1000_MBPS;
break;
}
mii_info->speed = SPEED_100;
case SPEED_100:
if (features & (SUPPORTED_100baseT_Half
| SUPPORTED_100baseT_Full)) {
ctrl |= PHY_BMCR_100_MBPS;
break;
}
mii_info->speed = SPEED_10;
case SPEED_10:
if (features & (SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full))
break;
default: /* Unsupported speed! */
ugphy_err("%s: Bad speed!", mii_info->dev->name);
break;
}
phy_write(mii_info, PHY_BMCR, ctrl);
}
/* Enable and Restart Autonegotiation */
static void genmii_restart_aneg(struct uec_mii_info *mii_info)
{
u16 ctl;
ctl = phy_read(mii_info, PHY_BMCR);
ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
phy_write(mii_info, PHY_BMCR, ctl);
}
static int gbit_config_aneg(struct uec_mii_info *mii_info)
{
u16 adv;
u32 advertise;
if(mii_info->autoneg) {
/* Configure the ADVERTISE register */
config_genmii_advert(mii_info);
advertise = mii_info->advertising;
adv = phy_read(mii_info, MII_1000BASETCONTROL);
adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
MII_1000BASETCONTROL_HALFDUPLEXCAP);
if (advertise & SUPPORTED_1000baseT_Half)
adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
if (advertise & SUPPORTED_1000baseT_Full)
adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
phy_write(mii_info, MII_1000BASETCONTROL, adv);
/* Start/Restart aneg */
genmii_restart_aneg(mii_info);
} else
genmii_setup_forced(mii_info);
return 0;
}
static int marvell_config_aneg(struct uec_mii_info *mii_info)
{
/* The Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation */
phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET);
phy_write(mii_info, 0x1d, 0x1f);
phy_write(mii_info, 0x1e, 0x200c);
phy_write(mii_info, 0x1d, 0x5);
phy_write(mii_info, 0x1e, 0);
phy_write(mii_info, 0x1e, 0x100);
gbit_config_aneg(mii_info);
return 0;
}
static int genmii_config_aneg(struct uec_mii_info *mii_info)
{
if (mii_info->autoneg) {
config_genmii_advert(mii_info);
genmii_restart_aneg(mii_info);
} else
genmii_setup_forced(mii_info);
return 0;
}
static int genmii_update_link(struct uec_mii_info *mii_info)
{
u16 status;
/* Do a fake read */
phy_read(mii_info, PHY_BMSR);
/* Read link and autonegotiation status */
status = phy_read(mii_info, PHY_BMSR);
if ((status & PHY_BMSR_LS) == 0)
mii_info->link = 0;
else
mii_info->link = 1;
/* If we are autonegotiating, and not done,
* return an error */
if (mii_info->autoneg && !(status & PHY_BMSR_AUTN_COMP))
return -EAGAIN;
return 0;
}
static int genmii_read_status(struct uec_mii_info *mii_info)
{
u16 status;
int err;
/* Update the link, but return if there
* was an error */
err = genmii_update_link(mii_info);
if (err)
return err;
if (mii_info->autoneg) {
status = phy_read(mii_info, PHY_ANLPAR);
if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
mii_info->speed = SPEED_100;
else
mii_info->speed = SPEED_10;
mii_info->pause = 0;
}
/* On non-aneg, we assume what we put in BMCR is the speed,
* though magic-aneg shouldn't prevent this case from occurring
*/
return 0;
}
static int marvell_read_status(struct uec_mii_info *mii_info)
{
u16 status;
int err;
/* Update the link, but return if there
* was an error */
err = genmii_update_link(mii_info);
if (err)
return err;
/* If the link is up, read the speed and duplex */
/* If we aren't autonegotiating, assume speeds
* are as set */
if (mii_info->autoneg && mii_info->link) {
int speed;
status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
/* Get the duplexity */
if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
/* Get the speed */
speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
switch(speed) {
case MII_M1011_PHY_SPEC_STATUS_1000:
mii_info->speed = SPEED_1000;
break;
case MII_M1011_PHY_SPEC_STATUS_100:
mii_info->speed = SPEED_100;
break;
default:
mii_info->speed = SPEED_10;
break;
}
mii_info->pause = 0;
}
return 0;
}
static int marvell_ack_interrupt(struct uec_mii_info *mii_info)
{
/* Clear the interrupts by reading the reg */
phy_read(mii_info, MII_M1011_IEVENT);
return 0;
}
static int marvell_config_intr(struct uec_mii_info *mii_info)
{
if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
else
phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
return 0;
}
static int dm9161_init(struct uec_mii_info *mii_info)
{
/* Reset the PHY */
phy_write(mii_info, PHY_BMCR, phy_read(mii_info, PHY_BMCR) |
PHY_BMCR_RESET);
/* PHY and MAC connect*/
phy_write(mii_info, PHY_BMCR, phy_read(mii_info, PHY_BMCR) &
~PHY_BMCR_ISO);
#ifdef CONFIG_RMII_MODE
phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_RMII_INIT);
#else
phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
#endif
config_genmii_advert(mii_info);
/* Start/restart aneg */
genmii_config_aneg(mii_info);
/* Delay to wait the aneg compeleted */
udelay(3000000);
return 0;
}
static int dm9161_config_aneg(struct uec_mii_info *mii_info)
{
return 0;
}
static int dm9161_read_status(struct uec_mii_info *mii_info)
{
u16 status;
int err;
/* Update the link, but return if there was an error*/
err = genmii_update_link(mii_info);
if (err)
return err;
/* If the link is up, read the speed and duplex
If we aren't autonegotiating assume speeds are as set */
if (mii_info->autoneg && mii_info->link) {
status = phy_read(mii_info, MII_DM9161_SCSR);
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
mii_info->speed = SPEED_100;
else
mii_info->speed = SPEED_10;
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
}
return 0;
}
static int dm9161_ack_interrupt(struct uec_mii_info *mii_info)
{
/* Clear the interrupt by reading the reg */
phy_read(mii_info, MII_DM9161_INTR);
return 0;
}
static int dm9161_config_intr(struct uec_mii_info *mii_info)
{
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
else
phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
return 0;
}
static void dm9161_close(struct uec_mii_info *mii_info)
{
}
static struct phy_info phy_info_dm9161 = {
.phy_id = 0x0181b880,
.phy_id_mask = 0x0ffffff0,
.name = "Davicom DM9161E",
.init = dm9161_init,
.config_aneg = dm9161_config_aneg,
.read_status = dm9161_read_status,
.close = dm9161_close,
};
static struct phy_info phy_info_dm9161a = {
.phy_id = 0x0181b8a0,
.phy_id_mask = 0x0ffffff0,
.name = "Davicom DM9161A",
.features = MII_BASIC_FEATURES,
.init = dm9161_init,
.config_aneg = dm9161_config_aneg,
.read_status = dm9161_read_status,
.ack_interrupt = dm9161_ack_interrupt,
.config_intr = dm9161_config_intr,
.close = dm9161_close,
};
static struct phy_info phy_info_marvell = {
.phy_id = 0x01410c00,
.phy_id_mask = 0xffffff00,
.name = "Marvell 88E11x1",
.features = MII_GBIT_FEATURES,
.config_aneg = &marvell_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
};
static struct phy_info phy_info_genmii= {
.phy_id = 0x00000000,
.phy_id_mask = 0x00000000,
.name = "Generic MII",
.features = MII_BASIC_FEATURES,
.config_aneg = genmii_config_aneg,
.read_status = genmii_read_status,
};
static struct phy_info *phy_info[] = {
&phy_info_dm9161,
&phy_info_dm9161a,
&phy_info_marvell,
&phy_info_genmii,
NULL
};
u16 phy_read(struct uec_mii_info *mii_info, u16 regnum)
{
return mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
}
void phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val)
{
mii_info->mdio_write(mii_info->dev,
mii_info->mii_id,
regnum, val);
}
/* Use the PHY ID registers to determine what type of PHY is attached
* to device dev. return a struct phy_info structure describing that PHY
*/
struct phy_info * get_phy_info(struct uec_mii_info *mii_info)
{
u16 phy_reg;
u32 phy_ID;
int i;
struct phy_info *theInfo = NULL;
/* Grab the bits from PHYIR1, and put them in the upper half */
phy_reg = phy_read(mii_info, PHY_PHYIDR1);
phy_ID = (phy_reg & 0xffff) << 16;
/* Grab the bits from PHYIR2, and put them in the lower half */
phy_reg = phy_read(mii_info, PHY_PHYIDR2);
phy_ID |= (phy_reg & 0xffff);
/* loop through all the known PHY types, and find one that */
/* matches the ID we read from the PHY. */
for (i = 0; phy_info[i]; i++)
if (phy_info[i]->phy_id ==
(phy_ID & phy_info[i]->phy_id_mask)) {
theInfo = phy_info[i];
break;
}
/* This shouldn't happen, as we have generic PHY support */
if (theInfo == NULL) {
ugphy_info("UEC: PHY id %x is not supported!", phy_ID);
return NULL;
} else {
ugphy_info("UEC: PHY is %s (%x)", theInfo->name, phy_ID);
}
return theInfo;
}
void marvell_phy_interface_mode(struct eth_device *dev, enet_interface_e mode)
{
uec_private_t *uec = (uec_private_t *)dev->priv;
struct uec_mii_info *mii_info;
if (!uec->mii_info) {
printf("%s: the PHY not intialized\n", __FUNCTION__);
return;
}
mii_info = uec->mii_info;
if (mode == ENET_100_RGMII) {
phy_write(mii_info, 0x00, 0x9140);
phy_write(mii_info, 0x1d, 0x001f);
phy_write(mii_info, 0x1e, 0x200c);
phy_write(mii_info, 0x1d, 0x0005);
phy_write(mii_info, 0x1e, 0x0000);
phy_write(mii_info, 0x1e, 0x0100);
phy_write(mii_info, 0x09, 0x0e00);
phy_write(mii_info, 0x04, 0x01e1);
phy_write(mii_info, 0x00, 0x9140);
phy_write(mii_info, 0x00, 0x1000);
udelay(100000);
phy_write(mii_info, 0x00, 0x2900);
phy_write(mii_info, 0x14, 0x0cd2);
phy_write(mii_info, 0x00, 0xa100);
phy_write(mii_info, 0x09, 0x0000);
phy_write(mii_info, 0x1b, 0x800b);
phy_write(mii_info, 0x04, 0x05e1);
phy_write(mii_info, 0x00, 0xa100);
phy_write(mii_info, 0x00, 0x2100);
udelay(1000000);
} else if (mode == ENET_10_RGMII) {
phy_write(mii_info, 0x14, 0x8e40);
phy_write(mii_info, 0x1b, 0x800b);
phy_write(mii_info, 0x14, 0x0c82);
phy_write(mii_info, 0x00, 0x8100);
udelay(1000000);
}
}
void change_phy_interface_mode(struct eth_device *dev, enet_interface_e mode)
{
#ifdef CONFIG_PHY_MODE_NEED_CHANGE
marvell_phy_interface_mode(dev, mode);
#endif
}
#endif /* CONFIG_QE */

256
drivers/qe/uec_phy.h Normal file
View File

@ -0,0 +1,256 @@
/*
* Copyright (C) 2005 Freescale Semiconductor, Inc.
*
* Author: Shlomi Gridish <gridish@freescale.com>
*
* Description: UCC ethernet driver -- PHY handling
* Driver for UEC on QE
* Based on 8260_io/fcc_enet.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __UEC_PHY_H__
#define __UEC_PHY_H__
#define MII_end ((u32)-2)
#define MII_read ((u32)-1)
#define MIIMIND_BUSY 0x00000001
#define MIIMIND_NOTVALID 0x00000004
#define UGETH_AN_TIMEOUT 2000
/* 1000BT control (Marvell & BCM54xx at least) */
#define MII_1000BASETCONTROL 0x09
#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200
#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100
/* Cicada Extended Control Register 1 */
#define MII_CIS8201_EXT_CON1 0x17
#define MII_CIS8201_EXTCON1_INIT 0x0000
/* Cicada Interrupt Mask Register */
#define MII_CIS8201_IMASK 0x19
#define MII_CIS8201_IMASK_IEN 0x8000
#define MII_CIS8201_IMASK_SPEED 0x4000
#define MII_CIS8201_IMASK_LINK 0x2000
#define MII_CIS8201_IMASK_DUPLEX 0x1000
#define MII_CIS8201_IMASK_MASK 0xf000
/* Cicada Interrupt Status Register */
#define MII_CIS8201_ISTAT 0x1a
#define MII_CIS8201_ISTAT_STATUS 0x8000
#define MII_CIS8201_ISTAT_SPEED 0x4000
#define MII_CIS8201_ISTAT_LINK 0x2000
#define MII_CIS8201_ISTAT_DUPLEX 0x1000
/* Cicada Auxiliary Control/Status Register */
#define MII_CIS8201_AUX_CONSTAT 0x1c
#define MII_CIS8201_AUXCONSTAT_INIT 0x0004
#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020
#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018
#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010
#define MII_CIS8201_AUXCONSTAT_100 0x0008
/* 88E1011 PHY Status Register */
#define MII_M1011_PHY_SPEC_STATUS 0x11
#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000
#define MII_M1011_PHY_SPEC_STATUS_100 0x4000
#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000
#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000
#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800
#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400
#define MII_M1011_IEVENT 0x13
#define MII_M1011_IEVENT_CLEAR 0x0000
#define MII_M1011_IMASK 0x12
#define MII_M1011_IMASK_INIT 0x6400
#define MII_M1011_IMASK_CLEAR 0x0000
#define MII_DM9161_SCR 0x10
#define MII_DM9161_SCR_INIT 0x0610
#define MII_DM9161_SCR_RMII_INIT 0x0710
/* DM9161 Specified Configuration and Status Register */
#define MII_DM9161_SCSR 0x11
#define MII_DM9161_SCSR_100F 0x8000
#define MII_DM9161_SCSR_100H 0x4000
#define MII_DM9161_SCSR_10F 0x2000
#define MII_DM9161_SCSR_10H 0x1000
/* DM9161 Interrupt Register */
#define MII_DM9161_INTR 0x15
#define MII_DM9161_INTR_PEND 0x8000
#define MII_DM9161_INTR_DPLX_MASK 0x0800
#define MII_DM9161_INTR_SPD_MASK 0x0400
#define MII_DM9161_INTR_LINK_MASK 0x0200
#define MII_DM9161_INTR_MASK 0x0100
#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
#define MII_DM9161_INTR_SPD_CHANGE 0x0008
#define MII_DM9161_INTR_LINK_CHANGE 0x0004
#define MII_DM9161_INTR_INIT 0x0000
#define MII_DM9161_INTR_STOP \
(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
| MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
/* DM9161 10BT Configuration/Status */
#define MII_DM9161_10BTCSR 0x12
#define MII_DM9161_10BTCSR_INIT 0x7800
#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
SUPPORTED_10baseT_Full | \
SUPPORTED_100baseT_Half | \
SUPPORTED_100baseT_Full | \
SUPPORTED_Autoneg | \
SUPPORTED_TP | \
SUPPORTED_MII)
#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
SUPPORTED_1000baseT_Half | \
SUPPORTED_1000baseT_Full)
#define MII_READ_COMMAND 0x00000001
#define MII_INTERRUPT_DISABLED 0x0
#define MII_INTERRUPT_ENABLED 0x1
#define SPEED_10 10
#define SPEED_100 100
#define SPEED_1000 1000
/* Duplex, half or full. */
#define DUPLEX_HALF 0x00
#define DUPLEX_FULL 0x01
/* Indicates what features are supported by the interface. */
#define SUPPORTED_10baseT_Half (1 << 0)
#define SUPPORTED_10baseT_Full (1 << 1)
#define SUPPORTED_100baseT_Half (1 << 2)
#define SUPPORTED_100baseT_Full (1 << 3)
#define SUPPORTED_1000baseT_Half (1 << 4)
#define SUPPORTED_1000baseT_Full (1 << 5)
#define SUPPORTED_Autoneg (1 << 6)
#define SUPPORTED_TP (1 << 7)
#define SUPPORTED_AUI (1 << 8)
#define SUPPORTED_MII (1 << 9)
#define SUPPORTED_FIBRE (1 << 10)
#define SUPPORTED_BNC (1 << 11)
#define SUPPORTED_10000baseT_Full (1 << 12)
#define ADVERTISED_10baseT_Half (1 << 0)
#define ADVERTISED_10baseT_Full (1 << 1)
#define ADVERTISED_100baseT_Half (1 << 2)
#define ADVERTISED_100baseT_Full (1 << 3)
#define ADVERTISED_1000baseT_Half (1 << 4)
#define ADVERTISED_1000baseT_Full (1 << 5)
#define ADVERTISED_Autoneg (1 << 6)
#define ADVERTISED_TP (1 << 7)
#define ADVERTISED_AUI (1 << 8)
#define ADVERTISED_MII (1 << 9)
#define ADVERTISED_FIBRE (1 << 10)
#define ADVERTISED_BNC (1 << 11)
#define ADVERTISED_10000baseT_Full (1 << 12)
/* Advertisement control register. */
#define ADVERTISE_SLCT 0x001f /* Selector bits */
#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
#define ADVERTISE_RESV 0x1c00 /* Unused... */
#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
ADVERTISE_CSMA)
#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
ADVERTISE_100HALF | ADVERTISE_100FULL)
/* Taken from mii_if_info and sungem_phy.h */
struct uec_mii_info {
/* Information about the PHY type */
/* And management functions */
struct phy_info *phyinfo;
struct eth_device *dev;
/* forced speed & duplex (no autoneg)
* partner speed & duplex & pause (autoneg)
*/
int speed;
int duplex;
int pause;
/* The most recently read link state */
int link;
/* Enabled Interrupts */
u32 interrupts;
u32 advertising;
int autoneg;
int mii_id;
/* private data pointer */
/* For use by PHYs to maintain extra state */
void *priv;
/* Provided by ethernet driver */
int (*mdio_read) (struct eth_device *dev, int mii_id, int reg);
void (*mdio_write) (struct eth_device *dev, int mii_id, int reg, int val);
};
/* struct phy_info: a structure which defines attributes for a PHY
*
* id will contain a number which represents the PHY. During
* startup, the driver will poll the PHY to find out what its
* UID--as defined by registers 2 and 3--is. The 32-bit result
* gotten from the PHY will be ANDed with phy_id_mask to
* discard any bits which may change based on revision numbers
* unimportant to functionality
*
* There are 6 commands which take a ugeth_mii_info structure.
* Each PHY must declare config_aneg, and read_status.
*/
struct phy_info {
u32 phy_id;
char *name;
unsigned int phy_id_mask;
u32 features;
/* Called to initialize the PHY */
int (*init)(struct uec_mii_info *mii_info);
/* Called to suspend the PHY for power */
int (*suspend)(struct uec_mii_info *mii_info);
/* Reconfigures autonegotiation (or disables it) */
int (*config_aneg)(struct uec_mii_info *mii_info);
/* Determines the negotiated speed and duplex */
int (*read_status)(struct uec_mii_info *mii_info);
/* Clears any pending interrupts */
int (*ack_interrupt)(struct uec_mii_info *mii_info);
/* Enables or disables interrupts */
int (*config_intr)(struct uec_mii_info *mii_info);
/* Clears up any memory if needed */
void (*close)(struct uec_mii_info *mii_info);
};
struct phy_info *get_phy_info(struct uec_mii_info *mii_info);
void write_phy_reg(struct eth_device *dev, int mii_id, int regnum, int value);
int read_phy_reg(struct eth_device *dev, int mii_id, int regnum);
void mii_clear_phy_interrupt(struct uec_mii_info *mii_info);
void mii_configure_phy_interrupt(struct uec_mii_info *mii_info, u32 interrupts);
#endif /* __UEC_PHY_H__ */

2
include/asm-ppc/global_data.h
View File

@ -69,6 +69,8 @@ typedef struct global_data {
#if defined(CONFIG_QE)
u32 qe_clk;
u32 brg_clk;
uint mp_alloc_base;
uint mp_alloc_top;
#endif /* CONFIG_QE */
#if defined (CONFIG_MPC8360)
u32 ddr_sec_clk;

29
include/configs/MPC8360EMDS.h
View File

@ -363,6 +363,35 @@
#define CONFIG_NET_MULTI 1
#endif
/*
* QE UEC ethernet configuration
*/
#define CONFIG_UEC_ETH
#define CONFIG_ETHPRIME "Freescale GETH"
#define CONFIG_PHY_MODE_NEED_CHANGE
#define CONFIG_UEC_ETH1 /* GETH1 */
#ifdef CONFIG_UEC_ETH1
#define CFG_UEC1_UCC_NUM 0 /* UCC1 */
#define CFG_UEC1_RX_CLK QE_CLK_NONE
#define CFG_UEC1_TX_CLK QE_CLK9
#define CFG_UEC1_ETH_TYPE GIGA_ETH
#define CFG_UEC1_PHY_ADDR 0
#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
#endif
#define CONFIG_UEC_ETH2 /* GETH2 */
#ifdef CONFIG_UEC_ETH2
#define CFG_UEC2_UCC_NUM 1 /* UCC2 */
#define CFG_UEC2_RX_CLK QE_CLK_NONE
#define CFG_UEC2_TX_CLK QE_CLK4
#define CFG_UEC2_ETH_TYPE GIGA_ETH
#define CFG_UEC2_PHY_ADDR 1
#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
#endif
/*
* Environment
*/

11
include/ioports.h
View File

@ -53,3 +53,14 @@ typedef struct {
* like the table in the 8260UM (and in the hymod manuals).
*/
extern const iop_conf_t iop_conf_tab[4][32];
typedef struct {
unsigned char port;
unsigned char pin;
int dir;
int open_drain;
int assign;
} qe_iop_conf_t;
#define QE_IOP_TAB_END (-1)

7
net/eth.c
View File

@ -54,6 +54,7 @@ extern int scc_initialize(bd_t*);
extern int skge_initialize(bd_t*);
extern int tsec_initialize(bd_t*, int, char *);
extern int npe_initialize(bd_t *);
extern int uec_initialize(int);
static struct eth_device *eth_devices, *eth_current;
@ -196,6 +197,12 @@ int eth_initialize(bd_t *bis)
tsec_initialize(bis, 3, CONFIG_MPC83XX_TSEC4_NAME);
# endif
#endif
#if defined(CONFIG_UEC_ETH1)
uec_initialize(0);
#endif
#if defined(CONFIG_UEC_ETH2)
uec_initialize(1);
#endif
#if defined(CONFIG_MPC86XX_TSEC1)
tsec_initialize(bis, 0, CONFIG_MPC86XX_TSEC1_NAME);
#endif