* Patch by Daniel Poirot, 10 Oct 2004:
Add support for Wind River sbc405 board * Patch by Rainer Brestan, 12 Oct 2004: Make examples/Makefile more robust
This commit is contained in:
wdenk
parent
6225c5db6c
commit
652a10c096
|
|
@ -2,6 +2,12 @@
|
|||
Changes for U-Boot 1.1.3:
|
||||
======================================================================
|
||||
|
||||
* Patch by Daniel Poirot, 10 Oct 2004:
|
||||
Add support for Wind River sbc405 board
|
||||
|
||||
* Patch by Rainer Brestan, 12 Oct 2004:
|
||||
Make examples/Makefile more robust
|
||||
|
||||
* Patch by Sam Song, 11 October 2004:
|
||||
- Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
|
||||
- Adjust CPU:BUS frequency ratio 1:1 when core frequency
|
||||
|
|
|
|||
2
CREDITS
2
CREDITS
|
|
@ -333,7 +333,7 @@ D: BedBug embedded debugger code
|
|||
|
||||
N: Daniel Poirot
|
||||
E: dan.poirot@windriver.com
|
||||
D: Support for the sbc8240 board
|
||||
D: Support for the Wind River sbc405, sbc8240 board
|
||||
W: http://www.windriver.com
|
||||
|
||||
N: Stefan Roese
|
||||
|
|
|
|||
|
|
@ -225,6 +225,10 @@ Denis Peter <d.peter@mpl.ch>
|
|||
MIP405 PPC4xx
|
||||
PIP405 PPC4xx
|
||||
|
||||
Daniel Poirot <dan.poirot@windriver.com>
|
||||
sbc8240 MPC8240
|
||||
sbc405 PPC405GP
|
||||
|
||||
Stefan Roese <stefan.roese@esd-electronics.com>
|
||||
|
||||
ADCIOP IOP480 (PPC401)
|
||||
|
|
|
|||
3
Makefile
3
Makefile
|
|
@ -836,6 +836,9 @@ PPChameleonEVB_HI_33_config: unconfig
|
|||
}
|
||||
@./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
|
||||
|
||||
sbc405_config: unconfig
|
||||
@./mkconfig $(@:_config=) ppc ppc4xx sbc405
|
||||
|
||||
VOH405_config: unconfig
|
||||
@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,46 @@
|
|||
#
|
||||
# (C) Copyright 2000, 2001
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = lib$(BOARD).a
|
||||
|
||||
OBJS = $(BOARD).o strataflash.o
|
||||
|
||||
$(LIB): $(OBJS) $(SOBJS)
|
||||
$(AR) crv $@ $(OBJS)
|
||||
|
||||
clean:
|
||||
rm -f $(SOBJS) $(OBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak .depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
|
||||
$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
|
||||
|
||||
sinclude .depend
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
#
|
||||
# (C) Copyright 2000, 2001
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
#
|
||||
# Wind River sbc405 boards
|
||||
#
|
||||
|
||||
TEXT_BASE = 0xFFFC0000
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
/*
|
||||
* (C) Copyright 2001
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/processor.h>
|
||||
#include <command.h>
|
||||
#include <malloc.h>
|
||||
#include <spd_sdram.h>
|
||||
|
||||
|
||||
int board_early_init_f (void)
|
||||
{
|
||||
/*
|
||||
* IRQ 0-15 405GP internally generated; active high; level sensitive
|
||||
* IRQ 16 405GP internally generated; active low; level sensitive
|
||||
* IRQ 17-24 RESERVED
|
||||
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
|
||||
* IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
|
||||
* IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
|
||||
* IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
|
||||
* IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
|
||||
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
|
||||
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
|
||||
*/
|
||||
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
||||
mtdcr(uicer, 0x00000000); /* disable all ints */
|
||||
mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
|
||||
mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
|
||||
mtdcr(uictr, 0x10000000); /* set int trigger levels */
|
||||
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
|
||||
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
||||
|
||||
/*
|
||||
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
|
||||
*/
|
||||
mtebc (epcr, 0xa8400000);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
int misc_init_f (void)
|
||||
{
|
||||
return 0; /* dummy implementation */
|
||||
}
|
||||
|
||||
|
||||
int misc_init_r (void)
|
||||
{
|
||||
return (0);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Check Board Identity:
|
||||
*/
|
||||
|
||||
int checkboard (void)
|
||||
{
|
||||
unsigned char str[64];
|
||||
int i = getenv_r ("serial#", str, sizeof(str));
|
||||
|
||||
puts ("Board: ");
|
||||
|
||||
if (i == -1) {
|
||||
puts ("### No HW ID - assuming sbc405");
|
||||
} else {
|
||||
puts(str);
|
||||
}
|
||||
|
||||
putc ('\n');
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
long int initdram (int board_type)
|
||||
{
|
||||
return spd_sdram (0);
|
||||
}
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
int testdram (void)
|
||||
{
|
||||
/* TODO: XXX XXX XXX */
|
||||
printf ("test: 64 MB - ok\n");
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
|
@ -0,0 +1,793 @@
|
|||
/*
|
||||
* (C) Copyright 2002
|
||||
* Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/processor.h>
|
||||
|
||||
#undef DEBUG_FLASH
|
||||
/*
|
||||
* This file implements a Common Flash Interface (CFI) driver for ppcboot.
|
||||
* The width of the port and the width of the chips are determined at initialization.
|
||||
* These widths are used to calculate the address for access CFI data structures.
|
||||
* It has been tested on an Intel Strataflash implementation.
|
||||
*
|
||||
* References
|
||||
* JEDEC Standard JESD68 - Common Flash Interface (CFI)
|
||||
* JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
|
||||
* Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
|
||||
* Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
|
||||
*
|
||||
* TODO
|
||||
* Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
|
||||
* Add support for other command sets Use the PRI and ALT to determine command set
|
||||
* Verify erase and program timeouts.
|
||||
*/
|
||||
|
||||
#define FLASH_CMD_CFI 0x98
|
||||
#define FLASH_CMD_READ_ID 0x90
|
||||
#define FLASH_CMD_RESET 0xff
|
||||
#define FLASH_CMD_BLOCK_ERASE 0x20
|
||||
#define FLASH_CMD_ERASE_CONFIRM 0xD0
|
||||
#define FLASH_CMD_WRITE 0x40
|
||||
#define FLASH_CMD_PROTECT 0x60
|
||||
#define FLASH_CMD_PROTECT_SET 0x01
|
||||
#define FLASH_CMD_PROTECT_CLEAR 0xD0
|
||||
#define FLASH_CMD_CLEAR_STATUS 0x50
|
||||
#define FLASH_CMD_WRITE_TO_BUFFER 0xE8
|
||||
#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0
|
||||
|
||||
#define FLASH_STATUS_DONE 0x80
|
||||
#define FLASH_STATUS_ESS 0x40
|
||||
#define FLASH_STATUS_ECLBS 0x20
|
||||
#define FLASH_STATUS_PSLBS 0x10
|
||||
#define FLASH_STATUS_VPENS 0x08
|
||||
#define FLASH_STATUS_PSS 0x04
|
||||
#define FLASH_STATUS_DPS 0x02
|
||||
#define FLASH_STATUS_R 0x01
|
||||
#define FLASH_STATUS_PROTECT 0x01
|
||||
|
||||
#define FLASH_OFFSET_CFI 0x55
|
||||
#define FLASH_OFFSET_CFI_RESP 0x10
|
||||
#define FLASH_OFFSET_WTOUT 0x1F
|
||||
#define FLASH_OFFSET_WBTOUT 0x20
|
||||
#define FLASH_OFFSET_ETOUT 0x21
|
||||
#define FLASH_OFFSET_CETOUT 0x22
|
||||
#define FLASH_OFFSET_WMAX_TOUT 0x23
|
||||
#define FLASH_OFFSET_WBMAX_TOUT 0x24
|
||||
#define FLASH_OFFSET_EMAX_TOUT 0x25
|
||||
#define FLASH_OFFSET_CEMAX_TOUT 0x26
|
||||
#define FLASH_OFFSET_SIZE 0x27
|
||||
#define FLASH_OFFSET_INTERFACE 0x28
|
||||
#define FLASH_OFFSET_BUFFER_SIZE 0x2A
|
||||
#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C
|
||||
#define FLASH_OFFSET_ERASE_REGIONS 0x2D
|
||||
#define FLASH_OFFSET_PROTECT 0x02
|
||||
#define FLASH_OFFSET_USER_PROTECTION 0x85
|
||||
#define FLASH_OFFSET_INTEL_PROTECTION 0x81
|
||||
|
||||
|
||||
#define FLASH_MAN_CFI 0x01000000
|
||||
|
||||
|
||||
typedef union {
|
||||
unsigned char c;
|
||||
unsigned short w;
|
||||
unsigned long l;
|
||||
} cfiword_t;
|
||||
|
||||
typedef union {
|
||||
unsigned char * cp;
|
||||
unsigned short *wp;
|
||||
unsigned long *lp;
|
||||
} cfiptr_t;
|
||||
|
||||
#define NUM_ERASE_REGIONS 4
|
||||
|
||||
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Functions
|
||||
*/
|
||||
|
||||
|
||||
static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c);
|
||||
static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf);
|
||||
static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd);
|
||||
static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd);
|
||||
static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
|
||||
static int flash_detect_cfi(flash_info_t * info);
|
||||
static ulong flash_get_size (ulong base, int banknum);
|
||||
static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
|
||||
static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
|
||||
#ifdef CFG_FLASH_USE_BUFFER_WRITE
|
||||
static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
|
||||
#endif
|
||||
/*-----------------------------------------------------------------------
|
||||
* create an address based on the offset and the port width
|
||||
*/
|
||||
inline uchar * flash_make_addr(flash_info_t * info, int sect, int offset)
|
||||
{
|
||||
return ((uchar *)(info->start[sect] + (offset * info->portwidth)));
|
||||
}
|
||||
/*-----------------------------------------------------------------------
|
||||
* read a character at a port width address
|
||||
*/
|
||||
inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
|
||||
{
|
||||
uchar *cp;
|
||||
cp = flash_make_addr(info, 0, offset);
|
||||
return (cp[info->portwidth - 1]);
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* read a short word by swapping for ppc format.
|
||||
*/
|
||||
ushort flash_read_ushort(flash_info_t * info, int sect, uchar offset)
|
||||
{
|
||||
uchar * addr;
|
||||
|
||||
addr = flash_make_addr(info, sect, offset);
|
||||
return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]);
|
||||
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* read a long word by picking the least significant byte of each maiximum
|
||||
* port size word. Swap for ppc format.
|
||||
*/
|
||||
ulong flash_read_long(flash_info_t * info, int sect, uchar offset)
|
||||
{
|
||||
uchar * addr;
|
||||
|
||||
addr = flash_make_addr(info, sect, offset);
|
||||
return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) |
|
||||
(addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]);
|
||||
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
unsigned long flash_init (void)
|
||||
{
|
||||
unsigned long size;
|
||||
int i;
|
||||
unsigned long address;
|
||||
|
||||
|
||||
/* The flash is positioned back to back, with the demultiplexing of the chip
|
||||
* based on the A24 address line.
|
||||
*
|
||||
*/
|
||||
|
||||
address = CFG_FLASH_BASE;
|
||||
size = 0;
|
||||
|
||||
/* Init: no FLASHes known */
|
||||
for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
|
||||
flash_info[i].flash_id = FLASH_UNKNOWN;
|
||||
size += flash_info[i].size = flash_get_size(address, i);
|
||||
address += CFG_FLASH_INCREMENT;
|
||||
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
|
||||
printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i,
|
||||
flash_info[0].size, flash_info[i].size<<20);
|
||||
}
|
||||
}
|
||||
|
||||
#if 0 /* test-only */
|
||||
/* Monitor protection ON by default */
|
||||
#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
|
||||
for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+CFG_MONITOR_LEN-1; i++)
|
||||
(void)flash_real_protect(&flash_info[0], i, 1);
|
||||
#endif
|
||||
#else
|
||||
/* monitor protection ON by default */
|
||||
flash_protect (FLAG_PROTECT_SET,
|
||||
- CFG_MONITOR_LEN,
|
||||
- 1, &flash_info[1]);
|
||||
#endif
|
||||
|
||||
return (size);
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
int flash_erase (flash_info_t *info, int s_first, int s_last)
|
||||
{
|
||||
int rcode = 0;
|
||||
int prot;
|
||||
int sect;
|
||||
|
||||
if( info->flash_id != FLASH_MAN_CFI) {
|
||||
printf ("Can't erase unknown flash type - aborted\n");
|
||||
return 1;
|
||||
}
|
||||
if ((s_first < 0) || (s_first > s_last)) {
|
||||
printf ("- no sectors to erase\n");
|
||||
return 1;
|
||||
}
|
||||
|
||||
prot = 0;
|
||||
for (sect=s_first; sect<=s_last; ++sect) {
|
||||
if (info->protect[sect]) {
|
||||
prot++;
|
||||
}
|
||||
}
|
||||
if (prot) {
|
||||
printf ("- Warning: %d protected sectors will not be erased!\n",
|
||||
prot);
|
||||
} else {
|
||||
printf ("\n");
|
||||
}
|
||||
|
||||
|
||||
for (sect = s_first; sect<=s_last; sect++) {
|
||||
if (info->protect[sect] == 0) { /* not protected */
|
||||
flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
|
||||
flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
|
||||
flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
|
||||
|
||||
if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) {
|
||||
rcode = 1;
|
||||
} else
|
||||
printf(".");
|
||||
}
|
||||
}
|
||||
printf (" done\n");
|
||||
return rcode;
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
void flash_print_info (flash_info_t *info)
|
||||
{
|
||||
int i;
|
||||
|
||||
if (info->flash_id != FLASH_MAN_CFI) {
|
||||
printf ("missing or unknown FLASH type\n");
|
||||
return;
|
||||
}
|
||||
|
||||
printf("CFI conformant FLASH (%d x %d)",
|
||||
(info->portwidth << 3 ), (info->chipwidth << 3 ));
|
||||
printf (" Size: %ld MB in %d Sectors\n",
|
||||
info->size >> 20, info->sector_count);
|
||||
printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
|
||||
info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
|
||||
|
||||
printf (" Sector Start Addresses:");
|
||||
for (i=0; i<info->sector_count; ++i) {
|
||||
#ifdef CFG_FLASH_EMPTY_INFO
|
||||
int k;
|
||||
int size;
|
||||
int erased;
|
||||
volatile unsigned long *flash;
|
||||
|
||||
/*
|
||||
* Check if whole sector is erased
|
||||
*/
|
||||
if (i != (info->sector_count-1))
|
||||
size = info->start[i+1] - info->start[i];
|
||||
else
|
||||
size = info->start[0] + info->size - info->start[i];
|
||||
erased = 1;
|
||||
flash = (volatile unsigned long *)info->start[i];
|
||||
size = size >> 2; /* divide by 4 for longword access */
|
||||
for (k=0; k<size; k++)
|
||||
{
|
||||
if (*flash++ != 0xffffffff)
|
||||
{
|
||||
erased = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if ((i % 5) == 0)
|
||||
printf ("\n ");
|
||||
/* print empty and read-only info */
|
||||
printf (" %08lX%s%s",
|
||||
info->start[i],
|
||||
erased ? " E" : " ",
|
||||
info->protect[i] ? "RO " : " ");
|
||||
#else
|
||||
if ((i % 5) == 0)
|
||||
printf ("\n ");
|
||||
printf (" %08lX%s",
|
||||
info->start[i],
|
||||
info->protect[i] ? " (RO)" : " ");
|
||||
#endif
|
||||
}
|
||||
printf ("\n");
|
||||
return;
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Copy memory to flash, returns:
|
||||
* 0 - OK
|
||||
* 1 - write timeout
|
||||
* 2 - Flash not erased
|
||||
*/
|
||||
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
|
||||
{
|
||||
ulong wp;
|
||||
ulong cp;
|
||||
int aln;
|
||||
cfiword_t cword;
|
||||
int i, rc;
|
||||
|
||||
/* get lower aligned address */
|
||||
wp = (addr & ~(info->portwidth - 1));
|
||||
|
||||
/* handle unaligned start */
|
||||
if((aln = addr - wp) != 0) {
|
||||
cword.l = 0;
|
||||
cp = wp;
|
||||
for(i=0;i<aln; ++i, ++cp)
|
||||
flash_add_byte(info, &cword, (*(uchar *)cp));
|
||||
|
||||
for(; (i< info->portwidth) && (cnt > 0) ; i++) {
|
||||
flash_add_byte(info, &cword, *src++);
|
||||
cnt--;
|
||||
cp++;
|
||||
}
|
||||
for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
|
||||
flash_add_byte(info, &cword, (*(uchar *)cp));
|
||||
if((rc = flash_write_cfiword(info, wp, cword)) != 0)
|
||||
return rc;
|
||||
wp = cp;
|
||||
}
|
||||
|
||||
#ifdef CFG_FLASH_USE_BUFFER_WRITE
|
||||
while(cnt >= info->portwidth) {
|
||||
i = info->buffer_size > cnt? cnt: info->buffer_size;
|
||||
if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
|
||||
return rc;
|
||||
wp += i;
|
||||
src += i;
|
||||
cnt -=i;
|
||||
}
|
||||
#else
|
||||
/* handle the aligned part */
|
||||
while(cnt >= info->portwidth) {
|
||||
cword.l = 0;
|
||||
for(i = 0; i < info->portwidth; i++) {
|
||||
flash_add_byte(info, &cword, *src++);
|
||||
}
|
||||
if((rc = flash_write_cfiword(info, wp, cword)) != 0)
|
||||
return rc;
|
||||
wp += info->portwidth;
|
||||
cnt -= info->portwidth;
|
||||
}
|
||||
#endif /* CFG_FLASH_USE_BUFFER_WRITE */
|
||||
if (cnt == 0) {
|
||||
return (0);
|
||||
}
|
||||
|
||||
/*
|
||||
* handle unaligned tail bytes
|
||||
*/
|
||||
cword.l = 0;
|
||||
for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) {
|
||||
flash_add_byte(info, &cword, *src++);
|
||||
--cnt;
|
||||
}
|
||||
for (; i<info->portwidth; ++i, ++cp) {
|
||||
flash_add_byte(info, & cword, (*(uchar *)cp));
|
||||
}
|
||||
|
||||
return flash_write_cfiword(info, wp, cword);
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
int flash_real_protect(flash_info_t *info, long sector, int prot)
|
||||
{
|
||||
int retcode = 0;
|
||||
|
||||
flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
|
||||
flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
|
||||
if(prot)
|
||||
flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
|
||||
else
|
||||
flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
|
||||
|
||||
if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout,
|
||||
prot?"protect":"unprotect")) == 0) {
|
||||
|
||||
info->protect[sector] = prot;
|
||||
/* Intel's unprotect unprotects all locking */
|
||||
if(prot == 0) {
|
||||
int i;
|
||||
for(i = 0 ; i<info->sector_count; i++) {
|
||||
if(info->protect[i])
|
||||
flash_real_protect(info, i, 1);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
return retcode;
|
||||
}
|
||||
/*-----------------------------------------------------------------------
|
||||
* wait for XSR.7 to be set. Time out with an error if it does not.
|
||||
* This routine does not set the flash to read-array mode.
|
||||
*/
|
||||
static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
|
||||
{
|
||||
ulong start;
|
||||
|
||||
/* Wait for command completion */
|
||||
start = get_timer (0);
|
||||
while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
|
||||
if (get_timer(start) > info->erase_blk_tout) {
|
||||
printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]);
|
||||
flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
|
||||
return ERR_TIMOUT;
|
||||
}
|
||||
}
|
||||
return ERR_OK;
|
||||
}
|
||||
/*-----------------------------------------------------------------------
|
||||
* Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
|
||||
* This routine sets the flash to read-array mode.
|
||||
*/
|
||||
static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
|
||||
{
|
||||
int retcode;
|
||||
retcode = flash_status_check(info, sector, tout, prompt);
|
||||
if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) {
|
||||
retcode = ERR_INVAL;
|
||||
printf("Flash %s error at address %lx\n", prompt,info->start[sector]);
|
||||
if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){
|
||||
printf("Command Sequence Error.\n");
|
||||
} else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
|
||||
printf("Block Erase Error.\n");
|
||||
retcode = ERR_NOT_ERASED;
|
||||
} else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
|
||||
printf("Locking Error\n");
|
||||
}
|
||||
if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){
|
||||
printf("Block locked.\n");
|
||||
retcode = ERR_PROTECTED;
|
||||
}
|
||||
if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
|
||||
printf("Vpp Low Error.\n");
|
||||
}
|
||||
flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
|
||||
return retcode;
|
||||
}
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c)
|
||||
{
|
||||
switch(info->portwidth) {
|
||||
case FLASH_CFI_8BIT:
|
||||
cword->c = c;
|
||||
break;
|
||||
case FLASH_CFI_16BIT:
|
||||
cword->w = (cword->w << 8) | c;
|
||||
break;
|
||||
case FLASH_CFI_32BIT:
|
||||
cword->l = (cword->l << 8) | c;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* make a proper sized command based on the port and chip widths
|
||||
*/
|
||||
static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf)
|
||||
{
|
||||
int i;
|
||||
uchar *cp = (uchar *)cmdbuf;
|
||||
for(i=0; i< info->portwidth; i++)
|
||||
*cp++ = ((i+1) % info->chipwidth) ? '\0':cmd;
|
||||
}
|
||||
|
||||
/*
|
||||
* Write a proper sized command to the correct address
|
||||
*/
|
||||
static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd)
|
||||
{
|
||||
|
||||
volatile cfiptr_t addr;
|
||||
cfiword_t cword;
|
||||
addr.cp = flash_make_addr(info, sect, offset);
|
||||
flash_make_cmd(info, cmd, &cword);
|
||||
switch(info->portwidth) {
|
||||
case FLASH_CFI_8BIT:
|
||||
*addr.cp = cword.c;
|
||||
break;
|
||||
case FLASH_CFI_16BIT:
|
||||
*addr.wp = cword.w;
|
||||
break;
|
||||
case FLASH_CFI_32BIT:
|
||||
*addr.lp = cword.l;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
|
||||
{
|
||||
cfiptr_t cptr;
|
||||
cfiword_t cword;
|
||||
int retval;
|
||||
cptr.cp = flash_make_addr(info, sect, offset);
|
||||
flash_make_cmd(info, cmd, &cword);
|
||||
switch(info->portwidth) {
|
||||
case FLASH_CFI_8BIT:
|
||||
retval = (cptr.cp[0] == cword.c);
|
||||
break;
|
||||
case FLASH_CFI_16BIT:
|
||||
retval = (cptr.wp[0] == cword.w);
|
||||
break;
|
||||
case FLASH_CFI_32BIT:
|
||||
retval = (cptr.lp[0] == cword.l);
|
||||
break;
|
||||
default:
|
||||
retval = 0;
|
||||
break;
|
||||
}
|
||||
return retval;
|
||||
}
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
|
||||
{
|
||||
cfiptr_t cptr;
|
||||
cfiword_t cword;
|
||||
int retval;
|
||||
cptr.cp = flash_make_addr(info, sect, offset);
|
||||
flash_make_cmd(info, cmd, &cword);
|
||||
switch(info->portwidth) {
|
||||
case FLASH_CFI_8BIT:
|
||||
retval = ((cptr.cp[0] & cword.c) == cword.c);
|
||||
break;
|
||||
case FLASH_CFI_16BIT:
|
||||
retval = ((cptr.wp[0] & cword.w) == cword.w);
|
||||
break;
|
||||
case FLASH_CFI_32BIT:
|
||||
retval = ((cptr.lp[0] & cword.l) == cword.l);
|
||||
break;
|
||||
default:
|
||||
retval = 0;
|
||||
break;
|
||||
}
|
||||
return retval;
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* detect if flash is compatible with the Common Flash Interface (CFI)
|
||||
* http://www.jedec.org/download/search/jesd68.pdf
|
||||
*
|
||||
*/
|
||||
static int flash_detect_cfi(flash_info_t * info)
|
||||
{
|
||||
|
||||
for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT;
|
||||
info->portwidth <<= 1) {
|
||||
for(info->chipwidth =FLASH_CFI_BY8;
|
||||
info->chipwidth <= info->portwidth;
|
||||
info->chipwidth <<= 1) {
|
||||
flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
|
||||
flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
|
||||
if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
|
||||
flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
|
||||
flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y'))
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
/*
|
||||
* The following code cannot be run from FLASH!
|
||||
*
|
||||
*/
|
||||
static ulong flash_get_size (ulong base, int banknum)
|
||||
{
|
||||
flash_info_t * info = &flash_info[banknum];
|
||||
int i, j;
|
||||
int sect_cnt;
|
||||
unsigned long sector;
|
||||
unsigned long tmp;
|
||||
int size_ratio;
|
||||
uchar num_erase_regions;
|
||||
int erase_region_size;
|
||||
int erase_region_count;
|
||||
|
||||
info->start[0] = base;
|
||||
|
||||
if(flash_detect_cfi(info)){
|
||||
#ifdef DEBUG_FLASH
|
||||
printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */
|
||||
#endif
|
||||
size_ratio = info->portwidth / info->chipwidth;
|
||||
num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
|
||||
#ifdef DEBUG_FLASH
|
||||
printf("found %d erase regions\n", num_erase_regions);
|
||||
#endif
|
||||
sect_cnt = 0;
|
||||
sector = base;
|
||||
for(i = 0 ; i < num_erase_regions; i++) {
|
||||
if(i > NUM_ERASE_REGIONS) {
|
||||
printf("%d erase regions found, only %d used\n",
|
||||
num_erase_regions, NUM_ERASE_REGIONS);
|
||||
break;
|
||||
}
|
||||
tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS);
|
||||
erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128;
|
||||
tmp >>= 16;
|
||||
erase_region_count = (tmp & 0xffff) +1;
|
||||
for(j = 0; j< erase_region_count; j++) {
|
||||
info->start[sect_cnt] = sector;
|
||||
sector += (erase_region_size * size_ratio);
|
||||
info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT);
|
||||
sect_cnt++;
|
||||
}
|
||||
}
|
||||
|
||||
info->sector_count = sect_cnt;
|
||||
/* multiply the size by the number of chips */
|
||||
info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio;
|
||||
info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
|
||||
tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
|
||||
info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
|
||||
tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
|
||||
info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
|
||||
tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
|
||||
info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000;
|
||||
info->flash_id = FLASH_MAN_CFI;
|
||||
}
|
||||
|
||||
flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
|
||||
return(info->size);
|
||||
}
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
|
||||
{
|
||||
|
||||
cfiptr_t ctladdr;
|
||||
cfiptr_t cptr;
|
||||
int flag;
|
||||
|
||||
ctladdr.cp = flash_make_addr(info, 0, 0);
|
||||
cptr.cp = (uchar *)dest;
|
||||
|
||||
|
||||
/* Check if Flash is (sufficiently) erased */
|
||||
switch(info->portwidth) {
|
||||
case FLASH_CFI_8BIT:
|
||||
flag = ((cptr.cp[0] & cword.c) == cword.c);
|
||||
break;
|
||||
case FLASH_CFI_16BIT:
|
||||
flag = ((cptr.wp[0] & cword.w) == cword.w);
|
||||
break;
|
||||
case FLASH_CFI_32BIT:
|
||||
flag = ((cptr.lp[0] & cword.l) == cword.l);
|
||||
break;
|
||||
default:
|
||||
return 2;
|
||||
}
|
||||
if(!flag)
|
||||
return 2;
|
||||
|
||||
/* Disable interrupts which might cause a timeout here */
|
||||
flag = disable_interrupts();
|
||||
|
||||
flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
|
||||
flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
|
||||
|
||||
switch(info->portwidth) {
|
||||
case FLASH_CFI_8BIT:
|
||||
cptr.cp[0] = cword.c;
|
||||
break;
|
||||
case FLASH_CFI_16BIT:
|
||||
cptr.wp[0] = cword.w;
|
||||
break;
|
||||
case FLASH_CFI_32BIT:
|
||||
cptr.lp[0] = cword.l;
|
||||
break;
|
||||
}
|
||||
|
||||
/* re-enable interrupts if necessary */
|
||||
if(flag)
|
||||
enable_interrupts();
|
||||
|
||||
return flash_full_status_check(info, 0, info->write_tout, "write");
|
||||
}
|
||||
|
||||
#ifdef CFG_FLASH_USE_BUFFER_WRITE
|
||||
|
||||
/* loop through the sectors from the highest address
|
||||
* when the passed address is greater or equal to the sector address
|
||||
* we have a match
|
||||
*/
|
||||
static int find_sector(flash_info_t *info, ulong addr)
|
||||
{
|
||||
int sector;
|
||||
for(sector = info->sector_count - 1; sector >= 0; sector--) {
|
||||
if(addr >= info->start[sector])
|
||||
break;
|
||||
}
|
||||
return sector;
|
||||
}
|
||||
|
||||
static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len)
|
||||
{
|
||||
|
||||
int sector;
|
||||
int cnt;
|
||||
int retcode;
|
||||
volatile cfiptr_t src;
|
||||
volatile cfiptr_t dst;
|
||||
|
||||
src.cp = cp;
|
||||
dst.cp = (uchar *)dest;
|
||||
sector = find_sector(info, dest);
|
||||
flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
|
||||
flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
|
||||
if((retcode = flash_status_check(info, sector, info->buffer_write_tout,
|
||||
"write to buffer")) == ERR_OK) {
|
||||
switch(info->portwidth) {
|
||||
case FLASH_CFI_8BIT:
|
||||
cnt = len;
|
||||
break;
|
||||
case FLASH_CFI_16BIT:
|
||||
cnt = len >> 1;
|
||||
break;
|
||||
case FLASH_CFI_32BIT:
|
||||
cnt = len >> 2;
|
||||
break;
|
||||
default:
|
||||
return ERR_INVAL;
|
||||
break;
|
||||
}
|
||||
flash_write_cmd(info, sector, 0, (uchar)cnt-1);
|
||||
while(cnt-- > 0) {
|
||||
switch(info->portwidth) {
|
||||
case FLASH_CFI_8BIT:
|
||||
*dst.cp++ = *src.cp++;
|
||||
break;
|
||||
case FLASH_CFI_16BIT:
|
||||
*dst.wp++ = *src.wp++;
|
||||
break;
|
||||
case FLASH_CFI_32BIT:
|
||||
*dst.lp++ = *src.lp++;
|
||||
break;
|
||||
default:
|
||||
return ERR_INVAL;
|
||||
break;
|
||||
}
|
||||
}
|
||||
flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM);
|
||||
retcode = flash_full_status_check(info, sector, info->buffer_write_tout,
|
||||
"buffer write");
|
||||
}
|
||||
flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
|
||||
return retcode;
|
||||
}
|
||||
#endif /* CFG_USE_FLASH_BUFFER_WRITE */
|
||||
|
|
@ -0,0 +1,147 @@
|
|||
/*
|
||||
* (C) Copyright 2000, 2001
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
OUTPUT_ARCH(powerpc)
|
||||
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
|
||||
/* Do we need any of these for elf?
|
||||
__DYNAMIC = 0; */
|
||||
SECTIONS
|
||||
{
|
||||
.resetvec 0xFFFFFFFC :
|
||||
{
|
||||
*(.resetvec)
|
||||
} = 0xffff
|
||||
|
||||
/* Read-only sections, merged into text segment: */
|
||||
. = + SIZEOF_HEADERS;
|
||||
.interp : { *(.interp) }
|
||||
.hash : { *(.hash) }
|
||||
.dynsym : { *(.dynsym) }
|
||||
.dynstr : { *(.dynstr) }
|
||||
.rel.text : { *(.rel.text) }
|
||||
.rela.text : { *(.rela.text) }
|
||||
.rel.data : { *(.rel.data) }
|
||||
.rela.data : { *(.rela.data) }
|
||||
.rel.rodata : { *(.rel.rodata) }
|
||||
.rela.rodata : { *(.rela.rodata) }
|
||||
.rel.got : { *(.rel.got) }
|
||||
.rela.got : { *(.rela.got) }
|
||||
.rel.ctors : { *(.rel.ctors) }
|
||||
.rela.ctors : { *(.rela.ctors) }
|
||||
.rel.dtors : { *(.rel.dtors) }
|
||||
.rela.dtors : { *(.rela.dtors) }
|
||||
.rel.bss : { *(.rel.bss) }
|
||||
.rela.bss : { *(.rela.bss) }
|
||||
.rel.plt : { *(.rel.plt) }
|
||||
.rela.plt : { *(.rela.plt) }
|
||||
.init : { *(.init) }
|
||||
.plt : { *(.plt) }
|
||||
.text :
|
||||
{
|
||||
/* WARNING - the following is hand-optimized to fit within */
|
||||
/* the sector layout of our flash chips! XXX FIXME XXX */
|
||||
|
||||
cpu/ppc4xx/start.o (.text)
|
||||
cpu/ppc4xx/traps.o (.text)
|
||||
cpu/ppc4xx/interrupts.o (.text)
|
||||
cpu/ppc4xx/serial.o (.text)
|
||||
cpu/ppc4xx/cpu_init.o (.text)
|
||||
cpu/ppc4xx/speed.o (.text)
|
||||
cpu/ppc4xx/405gp_enet.o (.text)
|
||||
common/dlmalloc.o (.text)
|
||||
lib_generic/crc32.o (.text)
|
||||
lib_ppc/extable.o (.text)
|
||||
lib_generic/zlib.o (.text)
|
||||
|
||||
/* . = env_offset;*/
|
||||
/* common/environment.o(.text)*/
|
||||
|
||||
*(.text)
|
||||
*(.fixup)
|
||||
*(.got1)
|
||||
}
|
||||
_etext = .;
|
||||
PROVIDE (etext = .);
|
||||
.rodata :
|
||||
{
|
||||
*(.rodata)
|
||||
*(.rodata1)
|
||||
*(.rodata.str1.4)
|
||||
}
|
||||
.fini : { *(.fini) } =0
|
||||
.ctors : { *(.ctors) }
|
||||
.dtors : { *(.dtors) }
|
||||
|
||||
/* Read-write section, merged into data segment: */
|
||||
. = (. + 0x00FF) & 0xFFFFFF00;
|
||||
_erotext = .;
|
||||
PROVIDE (erotext = .);
|
||||
.reloc :
|
||||
{
|
||||
*(.got)
|
||||
_GOT2_TABLE_ = .;
|
||||
*(.got2)
|
||||
_FIXUP_TABLE_ = .;
|
||||
*(.fixup)
|
||||
}
|
||||
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
|
||||
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
|
||||
|
||||
.data :
|
||||
{
|
||||
*(.data)
|
||||
*(.data1)
|
||||
*(.sdata)
|
||||
*(.sdata2)
|
||||
*(.dynamic)
|
||||
CONSTRUCTORS
|
||||
}
|
||||
_edata = .;
|
||||
PROVIDE (edata = .);
|
||||
|
||||
__u_boot_cmd_start = .;
|
||||
.u_boot_cmd : { *(.u_boot_cmd) }
|
||||
__u_boot_cmd_end = .;
|
||||
|
||||
__start___ex_table = .;
|
||||
__ex_table : { *(__ex_table) }
|
||||
__stop___ex_table = .;
|
||||
|
||||
. = ALIGN(256);
|
||||
__init_begin = .;
|
||||
.text.init : { *(.text.init) }
|
||||
.data.init : { *(.data.init) }
|
||||
. = ALIGN(256);
|
||||
__init_end = .;
|
||||
|
||||
__bss_start = .;
|
||||
.bss :
|
||||
{
|
||||
*(.sbss) *(.scommon)
|
||||
*(.dynbss)
|
||||
*(.bss)
|
||||
*(COMMON)
|
||||
}
|
||||
_end = . ;
|
||||
PROVIDE (end = .);
|
||||
}
|
||||
|
|
@ -105,7 +105,7 @@ clibdir := $(shell dirname `$(CC) $(CFLAGS) -print-file-name=libc.a`)
|
|||
|
||||
CPPFLAGS += -I..
|
||||
|
||||
all: .depend $(LIB) $(SREC) $(BIN)
|
||||
all: .depend $(OBJS) $(LIB) $(SREC) $(BIN)
|
||||
|
||||
#########################################################################
|
||||
$(LIB): .depend $(LIBOBJS)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,277 @@
|
|||
/*
|
||||
* (C) Copyright 2001
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
* board/config.h - configuration options, board specific
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
* (easy to change)
|
||||
*/
|
||||
|
||||
#define CONFIG_405GP 1 /* This is a PPC405 CPU */
|
||||
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
|
||||
#define CONFIG_SBC405 1 /* ...on a WR SBC405 board */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
|
||||
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
|
||||
|
||||
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
|
||||
|
||||
#define CONFIG_BAUDRATE 9600
|
||||
|
||||
#define CONFIG_PREBOOT "echo;echo Welcome to U-Boot for the sbc405;echo;echo Type \"? or help\" to get on-line help;echo"
|
||||
|
||||
#define CONFIG_RAMBOOT \
|
||||
"setenv bootargs root=/dev/ram rw nfsroot=$(serverip):$(rootpath) " \
|
||||
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
|
||||
"bootm ffc00000 ffca0000"
|
||||
#define CONFIG_NFSBOOT \
|
||||
"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
|
||||
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
|
||||
"bootm ffc00000"
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
#define CONFIG_BOOTCOMMAND "version;echo;tftpboot $(loadaddr) $(loadfile);bootvx" /* autoboot command */
|
||||
|
||||
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_PHY_ADDR 0 /* PHY address */
|
||||
#define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"bootargs=emac(0,0)host:/T221ppc/target/config/sbc405/vxWorks.st " \
|
||||
"e=192.168.193.102:ffffffe0 h=192.168.193.100 u=target pw=hello " \
|
||||
"f=0x08 tn=sbc405 o=emac \0" \
|
||||
"env_startaddr=FF000000\0" \
|
||||
"env_endaddr=FF03FFFF\0" \
|
||||
"loadfile=vxWorks.st\0" \
|
||||
"loadaddr=0x01000000\0" \
|
||||
"net_load=tftpboot $(loadaddr) $(loadfile)\0" \
|
||||
"uboot_startaddr=FFFC0000\0" \
|
||||
"uboot_endaddr=FFFFFFFF\0" \
|
||||
"update=tftp $(loadaddr) u-boot.bin;" \
|
||||
"protect off $(uboot_startaddr) $(uboot_endaddr);" \
|
||||
"era $(uboot_startaddr) $(uboot_endaddr);" \
|
||||
"cp.b $(loadaddr) $(uboot_startaddr) $(filesize);" \
|
||||
"protect on $(uboot_startaddr) $(uboot_endaddr)\0" \
|
||||
"zapenv=protect off $(env_startaddr) $(env_endaddr);" \
|
||||
"era $(env_startaddr) $(env_endaddr);" \
|
||||
"protect on $(env_startaddr) $(env_endaddr)\0"
|
||||
|
||||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
||||
|
||||
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
|
||||
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
|
||||
CFG_CMD_BSP | \
|
||||
CFG_CMD_ELF | \
|
||||
CFG_CMD_I2C | \
|
||||
CFG_CMD_IRQ | \
|
||||
CFG_CMD_MII | \
|
||||
CFG_CMD_PCI | \
|
||||
CFG_CMD_PING | \
|
||||
CFG_CMD_SDRAM | \
|
||||
0 )
|
||||
|
||||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
|
||||
|
||||
#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */
|
||||
#define CONFIG_IPADDR 192.168.193.102
|
||||
#define CONFIG_NETMASK 255.255.255.224
|
||||
#define CONFIG_SERVERIP 192.168.193.119
|
||||
#define CONFIG_GATEWAYIP 192.168.193.97
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
|
||||
#undef CFG_HUSH_PARSER /* use "hush" command parser */
|
||||
#ifdef CFG_HUSH_PARSER
|
||||
#define CFG_PROMPT_HUSH_PS2 "> "
|
||||
#endif
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
|
||||
#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */
|
||||
#define CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
|
||||
#define CFG_BASE_BAUD 691200
|
||||
|
||||
/* The following table includes the supported baudrates */
|
||||
#define CFG_BAUDRATE_TABLE \
|
||||
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
|
||||
57600, 115200, 230400, 460800, 921600 }
|
||||
|
||||
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
||||
#define CFG_EXTBDINFO 1 /* To use extended board_info (bd_t) */
|
||||
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
|
||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
||||
|
||||
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
|
||||
|
||||
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CFG_I2C_SLAVE 0x7F
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PCI stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
|
||||
#define PCI_HOST_FORCE 1 /* configure as pci host */
|
||||
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
|
||||
|
||||
#define CONFIG_PCI /* include pci support */
|
||||
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
/* resource configuration */
|
||||
|
||||
#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
|
||||
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
|
||||
#define CFG_PCI_SUBSYS_DEVICEID 0x0408 /* PCI Device ID: PMC-405 */
|
||||
#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
|
||||
#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
|
||||
#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
|
||||
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
|
||||
#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
|
||||
#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
|
||||
#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Start addresses for the final memory configuration
|
||||
* (Set up by the startup code)
|
||||
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
||||
*/
|
||||
#define CFG_SDRAM_BASE 0x00000000
|
||||
#define CFG_MONITOR_BASE 0xFFFC0000
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
|
||||
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH organization
|
||||
*/
|
||||
#define CFG_FLASH_BASE 0xFF000000
|
||||
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
|
||||
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
||||
#define CFG_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (in ms) */
|
||||
#define CFG_FLASH_INCREMENT 0x01000000
|
||||
#undef CFG_FLASH_PROTECTION /* don't use hardware protection */
|
||||
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
||||
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Environment Variable setup
|
||||
*/
|
||||
#define CFG_ENV_ADDR CFG_FLASH_BASE /* starting right at the beginning */
|
||||
#define CFG_ENV_IS_IN_FLASH 1
|
||||
#define CFG_ENV_OFFSET 0 /* starting right at the beginning */
|
||||
#define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */
|
||||
#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Cache Configuration
|
||||
*/
|
||||
#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
|
||||
/* have only 8kB, 16kB is save here */
|
||||
#define CFG_CACHELINE_SIZE 32 /* ... */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* External Bus Controller (EBC) Setup
|
||||
*/
|
||||
#define FLASH0_BA CFG_FLASH_BASE /* FLASH 0 Base Address */
|
||||
|
||||
/* Memory Bank 0 (Flash Bank 0) initialization */
|
||||
#define CFG_EBC_PB0AP 0x92015480
|
||||
#define CFG_EBC_PB0CR FLASH0_BA | 0x9C000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=32bit*/
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Definitions for initial stack pointer and data area (in data cache)
|
||||
*/
|
||||
|
||||
/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
|
||||
#define CFG_TEMP_STACK_OCM 1
|
||||
|
||||
/* On Chip Memory location */
|
||||
#define CFG_OCM_DATA_ADDR 0xF8000000
|
||||
#define CFG_OCM_DATA_SIZE 0x1000
|
||||
|
||||
#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */
|
||||
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
|
||||
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Definitions for Serial Presence Detect EEPROM address
|
||||
* (to get SDRAM settings)
|
||||
*/
|
||||
#define SPD_EEPROM_ADDRESS 0x50
|
||||
#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
|
||||
|
||||
/*
|
||||
* Internal Definitions
|
||||
*
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue