phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Code cleanup; make several boards compile & link.

This commit is contained in:
wdenk 2004-03-14 22:25:36 +00:00
parent 855a496fe9
commit 42dfe7a184
64 changed files with 708 additions and 685 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
CHANGELOG
View File

@ -14,7 +14,7 @@ Changes for U-Boot 1.0.2:
* Patch by Leon Kukovec, 12 Mar 2004:
Fix get_dentfromdir() to correctly handle deleted dentries
* Patch by George G. Davis, 11 Mar 2004:
Remove hard coded network settings in TI OMAP1610 H2
default board config

18
Makefile
View File

@ -1144,17 +1144,17 @@ ADNPESC1_base_32_config \
ADNPESC1_config: unconfig
@ >include/config.h
@[ -z "$(findstring _DNPEVA2,$@)" ] || \
{ echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \
echo "... DNP/EVA2 configuration" ; \
}
{ echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \
echo "... DNP/EVA2 configuration" ; \
}
@[ -z "$(findstring _base_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
echo "... NIOS 'base_32' configuration" ; \
}
{ echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
echo "... NIOS 'base_32' configuration" ; \
}
@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
echo "... NIOS 'base_32' configuration (DEFAULT)" ; \
}
{ echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
echo "... NIOS 'base_32' configuration (DEFAULT)" ; \
}
@./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv

2
board/cogent/mb.c
View File

@ -235,7 +235,7 @@ int misc_init_f (void)
long int initdram (int board_type)
{
#if CONFIG_CMA111
#ifdef CONFIG_CMA111
return (32L * 1024L * 1024L);
#else
unsigned char dipsw_val;

1
board/csb272/csb272.c
View File

@ -171,4 +171,3 @@ int last_stage_init(void)
return 0; /* success */
}

3
board/dave/B2/flash.c
View File

@ -45,9 +45,6 @@ unsigned long flash_init (void)
#else
unsigned long size_b0;
int i;
uint pbcr;
unsigned long base_b0;
int size_val = 0;
/* Init: no FLASHes known */
for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {

4
board/dave/B2/u-boot.lds
View File

@ -51,7 +51,7 @@ SECTIONS
armboot_end_data = .;
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) }
armboot_end = .;
_end = .;
}

2
board/emk/common/flash.c
View File

@ -353,7 +353,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
}
break;
}
/* fall thru to here ! */
default:
printf ("unknown AMD device=%x %x %x",

2
board/emk/top5200/top5200.c
View File

@ -57,7 +57,7 @@ long int initdram (int board_type)
*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN;
/* precharge all banks */
*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
#if CFG_DRAM_DDR
#ifdef CFG_DRAM_DDR
/* set extended mode register */
*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_EMODE;
#endif

2
board/gcplus/flash.c
View File

@ -404,7 +404,7 @@ write_data(flash_info_t * info, ulong dest, FPW data)
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
printf("not erased at %08lx (%x)\n", (ulong) addr, *addr);
printf("not erased at %08lX (%lX)\n", (ulong) addr, *addr);
return (2);
}
/* Disable interrupts which might cause a timeout here */

2
board/icecube/icecube.c
View File

@ -215,7 +215,7 @@ void pci_init_board(void)
void init_ide_reset (void)
{
debug ("init_ide_reset\n");
/* Configure PSC1_4 as GPIO output for ATA reset */
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;

2
board/integratorap/config.mk
View File

@ -1,5 +1,5 @@
#
# image should be loaded at 0x01000000
# image should be loaded at 0x01000000
#
TEXT_BASE = 0x01000000

470
board/integratorap/integratorap.c
View File

@ -105,146 +105,161 @@ static struct pci_config_table pci_integrator_config_table[] = {
};
#endif
// V3 access routines
/* V3 access routines */
#define _V3Write16(o,v) (*(volatile unsigned short *)(PCI_V3_BASE + (unsigned int)(o)) = (unsigned short)(v))
#define _V3Read16(o) (*(volatile unsigned short *)(PCI_V3_BASE + (unsigned int)(o)))
#define _V3Write32(o,v) (*(volatile unsigned int *)(PCI_V3_BASE + (unsigned int)(o)) = (unsigned int)(v))
#define _V3Read32(o) (*(volatile unsigned int *)(PCI_V3_BASE + (unsigned int)(o)))
// Compute address necessary to access PCI config space for the given
// bus and device.
#define PCI_CONFIG_ADDRESS( __bus, __devfn, __offset ) \
({ \
unsigned int __address, __devicebit; \
unsigned short __mapaddress; \
unsigned int __dev = PCI_DEV(__devfn); /* FIXME to check!! (slot?) */ \
/* Compute address necessary to access PCI config space for the given */
/* bus and device. */
#define PCI_CONFIG_ADDRESS( __bus, __devfn, __offset ) ({ \
unsigned int __address, __devicebit; \
unsigned short __mapaddress; \
unsigned int __dev = PCI_DEV (__devfn); /* FIXME to check!! (slot?) */ \
\
if (__bus == 0) { \
/* local bus segment so need a type 0 config cycle */ \
/* build the PCI configuration "address" with one-hot in A31-A11 */ \
__address = PCI_CONFIG_BASE; \
__address |= ((__devfn & 0x07) << 8); \
__address |= __offset & 0xFF; \
__mapaddress = 0x000A; /* 101=>config cycle, 0=>A1=A0=0 */ \
__devicebit = (1 << (__dev + 11)); \
if (__bus == 0) { \
/* local bus segment so need a type 0 config cycle */ \
/* build the PCI configuration "address" with one-hot in A31-A11 */ \
__address = PCI_CONFIG_BASE; \
__address |= ((__devfn & 0x07) << 8); \
__address |= __offset & 0xFF; \
__mapaddress = 0x000A; /* 101=>config cycle, 0=>A1=A0=0 */ \
__devicebit = (1 << (__dev + 11)); \
\
if ((__devicebit & 0xFF000000) != 0) { \
/* high order bits are handled by the MAP register */ \
__mapaddress |= (__devicebit >> 16); \
} else { \
/* low order bits handled directly in the address */ \
__address |= __devicebit; \
} \
} else { /* bus !=0 */ \
/* not the local bus segment so need a type 1 config cycle */ \
/* A31-A24 are don't care (so clear to 0) */ \
__mapaddress = 0x000B; /* 101=>config cycle, 1=>A1&A0 from PCI_CFG */ \
__address = PCI_CONFIG_BASE; \
__address |= ((__bus & 0xFF) << 16); /* bits 23..16 = bus number */ \
__address |= ((__dev & 0x1F) << 11); /* bits 15..11 = device number */ \
__address |= ((__devfn & 0x07) << 8); /* bits 10..8 = function number*/ \
__address |= __offset & 0xFF; /* bits 7..0 = register number*/ \
} \
_V3Write16(V3_LB_MAP1, __mapaddress); \
\
__address; \
})
if ((__devicebit & 0xFF000000) != 0) { \
/* high order bits are handled by the MAP register */ \
__mapaddress |= (__devicebit >> 16); \
} else { \
/* low order bits handled directly in the address */ \
__address |= __devicebit; \
} \
} else { /* bus !=0 */ \
/* not the local bus segment so need a type 1 config cycle */ \
/* A31-A24 are don't care (so clear to 0) */ \
__mapaddress = 0x000B; /* 101=>config cycle, 1=>A1&A0 from PCI_CFG */ \
__address = PCI_CONFIG_BASE; \
__address |= ((__bus & 0xFF) << 16); /* bits 23..16 = bus number */ \
__address |= ((__dev & 0x1F) << 11); /* bits 15..11 = device number */ \
__address |= ((__devfn & 0x07) << 8); /* bits 10..8 = function number */ \
__address |= __offset & 0xFF; /* bits 7..0 = register number */ \
} \
_V3Write16 (V3_LB_MAP1, __mapaddress); \
__address; \
})
// _V3OpenConfigWindow - open V3 configuration window
#define _V3OpenConfigWindow() \
{ \
/* Set up base0 to see all 512Mbytes of memory space (not */ \
/* prefetchable), this frees up base1 for re-use by configuration*/ \
/* memory */ \
\
_V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) | \
0x90 | V3_LB_BASE_M_ENABLE)); \
/* Set up base1 to point into configuration space, note that MAP1 */ \
/* register is set up by pciMakeConfigAddress(). */ \
\
_V3Write32 (V3_LB_BASE1, ((CPU_PCI_CNFG_ADRS & 0xFFF00000) | \
0x40 | V3_LB_BASE_M_ENABLE)); \
}
/* _V3OpenConfigWindow - open V3 configuration window */
#define _V3OpenConfigWindow() { \
/* Set up base0 to see all 512Mbytes of memory space (not */ \
/* prefetchable), this frees up base1 for re-use by configuration*/ \
/* memory */ \
\
_V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) | \
0x90 | V3_LB_BASE_M_ENABLE)); \
/* Set up base1 to point into configuration space, note that MAP1 */ \
/* register is set up by pciMakeConfigAddress(). */ \
\
_V3Write32 (V3_LB_BASE1, ((CPU_PCI_CNFG_ADRS & 0xFFF00000) | \
0x40 | V3_LB_BASE_M_ENABLE)); \
}
// _V3CloseConfigWindow - close V3 configuration window
#define _V3CloseConfigWindow() \
{ \
/* Reassign base1 for use by prefetchable PCI memory */ \
_V3Write32 (V3_LB_BASE1, (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) \
| 0x84 | V3_LB_BASE_M_ENABLE)); \
_V3Write16 (V3_LB_MAP1, \
/* _V3CloseConfigWindow - close V3 configuration window */
#define _V3CloseConfigWindow() { \
/* Reassign base1 for use by prefetchable PCI memory */ \
_V3Write32 (V3_LB_BASE1, (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) \
| 0x84 | V3_LB_BASE_M_ENABLE)); \
_V3Write16 (V3_LB_MAP1, \
(((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) >> 16) | 0x0006); \
\
/* And shrink base0 back to a 256M window (NOTE: MAP0 already correct) */ \
\
_V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) | \
0x80 | V3_LB_BASE_M_ENABLE)); \
}
static int pci_integrator_read_byte(struct pci_controller *hose, pci_dev_t dev,
int offset, unsigned char *val)
{
_V3OpenConfigWindow();
*val = *(volatile unsigned char *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), offset);
_V3CloseConfigWindow();
return 0;
\
/* And shrink base0 back to a 256M window (NOTE: MAP0 already correct) */ \
\
_V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) | \
0x80 | V3_LB_BASE_M_ENABLE)); \
}
static int pci_integrator_read__word(struct pci_controller *hose, pci_dev_t dev,
int offset, unsigned short *val)
static int pci_integrator_read_byte (struct pci_controller *hose, pci_dev_t dev,
int offset, unsigned char *val)
{
_V3OpenConfigWindow();
*val = *(volatile unsigned short *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), offset);
_V3CloseConfigWindow();
_V3OpenConfigWindow ();
*val = *(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
offset);
_V3CloseConfigWindow ();
return 0;
return 0;
}
static int pci_integrator_read_dword(struct pci_controller *hose, pci_dev_t dev,
int offset, unsigned int *val)
static int pci_integrator_read__word (struct pci_controller *hose,
pci_dev_t dev, int offset,
unsigned short *val)
{
_V3OpenConfigWindow();
*val = *(volatile unsigned short *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), offset);
*val |= (*(volatile unsigned int *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), (offset+2))) << 16;
_V3CloseConfigWindow();
_V3OpenConfigWindow ();
*val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
offset);
_V3CloseConfigWindow ();
return 0;
return 0;
}
static int pci_integrator_write_byte(struct pci_controller *hose, pci_dev_t dev,
int offset, unsigned char val)
static int pci_integrator_read_dword (struct pci_controller *hose,
pci_dev_t dev, int offset,
unsigned int *val)
{
_V3OpenConfigWindow();
*(volatile unsigned char *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), offset) = val;
_V3CloseConfigWindow();
_V3OpenConfigWindow ();
*val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
offset);
*val |= (*(volatile unsigned int *)
PCI_CONFIG_ADDRESS (PCI_BUS (dev), PCI_FUNC (dev),
(offset + 2))) << 16;
_V3CloseConfigWindow ();
return 0;
return 0;
}
static int pci_integrator_write_word(struct pci_controller *hose, pci_dev_t dev,
int offset,unsigned short val)
static int pci_integrator_write_byte (struct pci_controller *hose,
pci_dev_t dev, int offset,
unsigned char val)
{
_V3OpenConfigWindow();
*(volatile unsigned short *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), offset) = val;
_V3CloseConfigWindow();
_V3OpenConfigWindow ();
*(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
offset) = val;
_V3CloseConfigWindow ();
return 0;
return 0;
}
static int pci_integrator_write_dword(struct pci_controller *hose, pci_dev_t dev,
int offset, unsigned int val)
static int pci_integrator_write_word (struct pci_controller *hose,
pci_dev_t dev, int offset,
unsigned short val)
{
_V3OpenConfigWindow();
*(volatile unsigned short *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), offset) = (val & 0xFFFF);
*(volatile unsigned short *)PCI_CONFIG_ADDRESS(PCI_BUS(dev), PCI_FUNC(dev), (offset + 2)) = ((val >> 16) & 0xFFFF);
_V3CloseConfigWindow();
_V3OpenConfigWindow ();
*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
offset) = val;
_V3CloseConfigWindow ();
return 0;
return 0;
}
static int pci_integrator_write_dword (struct pci_controller *hose,
pci_dev_t dev, int offset,
unsigned int val)
{
_V3OpenConfigWindow ();
*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
offset) = (val & 0xFFFF);
*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
(offset + 2)) = ((val >> 16) & 0xFFFF);
_V3CloseConfigWindow ();
return 0;
}
/******************************
* PCI initialisation
******************************/
@ -255,176 +270,184 @@ struct pci_controller integrator_hose = {
#endif
};
void pci_init_board(void)
void pci_init_board (void)
{
volatile int i, j;
struct pci_controller *hose = &integrator_hose;
volatile int i, j;
struct pci_controller *hose = &integrator_hose;
/* setting this register will take the V3 out of reset */
/* setting this register will take the V3 out of reset */
*(volatile unsigned int *)(INTEGRATOR_SC_PCIENABLE) = 1;
*(volatile unsigned int *) (INTEGRATOR_SC_PCIENABLE) = 1;
/* wait a few usecs to settle the device and the PCI bus */
/* wait a few usecs to settle the device and the PCI bus */
for (i = 0; i < 100 ; i++)
j = i + 1;
for (i = 0; i < 100; i++)
j = i + 1;
/* Now write the Base I/O Address Word to V3_BASE + 0x6C */
/* Now write the Base I/O Address Word to V3_BASE + 0x6C */
*(volatile unsigned short *)(V3_BASE + V3_LB_IO_BASE) = (unsigned short)(V3_BASE >> 16);
*(volatile unsigned short *) (V3_BASE + V3_LB_IO_BASE) =
(unsigned short) (V3_BASE >> 16);
do {
*(volatile unsigned char *)(V3_BASE + V3_MAIL_DATA) = 0xAA;
*(volatile unsigned char *)(V3_BASE + V3_MAIL_DATA + 4) = 0x55;
} while (*(volatile unsigned char *)(V3_BASE + V3_MAIL_DATA) != 0xAA ||
*(volatile unsigned char *)(V3_BASE + V3_MAIL_DATA + 4) != 0x55);
do {
*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) = 0xAA;
*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA + 4) =
0x55;
} while (*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) != 0xAA
|| *(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA +
4) != 0x55);
/* Make sure that V3 register access is not locked, if it is, unlock it */
/* Make sure that V3 register access is not locked, if it is, unlock it */
if ((*(volatile unsigned short *)(V3_BASE + V3_SYSTEM) & V3_SYSTEM_M_LOCK)
== V3_SYSTEM_M_LOCK)
*(volatile unsigned short *)(V3_BASE + V3_SYSTEM) = 0xA05F;
if ((*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &
V3_SYSTEM_M_LOCK)
== V3_SYSTEM_M_LOCK)
*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) = 0xA05F;
/* Ensure that the slave accesses from PCI are disabled while we */
/* setup windows */
/* Ensure that the slave accesses from PCI are disabled while we */
/* setup windows */
*(volatile unsigned short *)(V3_BASE + V3_PCI_CMD) &=
~(V3_COMMAND_M_MEM_EN | V3_COMMAND_M_IO_EN);
*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) &=
~(V3_COMMAND_M_MEM_EN | V3_COMMAND_M_IO_EN);
/* Clear RST_OUT to 0; keep the PCI bus in reset until we've finished */
/* Clear RST_OUT to 0; keep the PCI bus in reset until we've finished */
*(volatile unsigned short *)(V3_BASE + V3_SYSTEM) &= ~V3_SYSTEM_M_RST_OUT;
*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &=
~V3_SYSTEM_M_RST_OUT;
/* Make all accesses from PCI space retry until we're ready for them */
/* Make all accesses from PCI space retry until we're ready for them */
*(volatile unsigned short *)(V3_BASE + V3_PCI_CFG) |= V3_PCI_CFG_M_RETRY_EN;
*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) |=
V3_PCI_CFG_M_RETRY_EN;
/* Set up any V3 PCI Configuration Registers that we absolutely have to */
/* LB_CFG controls Local Bus protocol. */
/* Enable LocalBus byte strobes for READ accesses too. */
/* set bit 7 BE_IMODE and bit 6 BE_OMODE */
/* Set up any V3 PCI Configuration Registers that we absolutely have to */
/* LB_CFG controls Local Bus protocol. */
/* Enable LocalBus byte strobes for READ accesses too. */
/* set bit 7 BE_IMODE and bit 6 BE_OMODE */
*(volatile unsigned short *)(V3_BASE + V3_LB_CFG) |= 0x0C0;
*(volatile unsigned short *) (V3_BASE + V3_LB_CFG) |= 0x0C0;
/* PCI_CMD controls overall PCI operation. */
/* Enable PCI bus master. */
/* PCI_CMD controls overall PCI operation. */
/* Enable PCI bus master. */
*(volatile unsigned short *)(V3_BASE + V3_PCI_CMD) |= 0x04;
*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) |= 0x04;
/* PCI_MAP0 controls where the PCI to CPU memory window is on Local Bus*/
/* PCI_MAP0 controls where the PCI to CPU memory window is on Local Bus */
*(volatile unsigned int *)(V3_BASE + V3_PCI_MAP0) = (INTEGRATOR_BOOT_ROM_BASE) |
(V3_PCI_MAP_M_ADR_SIZE_512M |
V3_PCI_MAP_M_REG_EN |
V3_PCI_MAP_M_ENABLE);
*(volatile unsigned int *) (V3_BASE + V3_PCI_MAP0) =
(INTEGRATOR_BOOT_ROM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_512M |
V3_PCI_MAP_M_REG_EN |
V3_PCI_MAP_M_ENABLE);
/* PCI_BASE0 is the PCI address of the start of the window */
/* PCI_BASE0 is the PCI address of the start of the window */
*(volatile unsigned int *)(V3_BASE + V3_PCI_BASE0) = INTEGRATOR_BOOT_ROM_BASE;
*(volatile unsigned int *) (V3_BASE + V3_PCI_BASE0) =
INTEGRATOR_BOOT_ROM_BASE;
/* PCI_MAP1 is LOCAL address of the start of the window */
/* PCI_MAP1 is LOCAL address of the start of the window */
*(volatile unsigned int *)(V3_BASE + V3_PCI_MAP1) = (INTEGRATOR_HDR0_SDRAM_BASE) |
(V3_PCI_MAP_M_ADR_SIZE_1024M | V3_PCI_MAP_M_REG_EN |
V3_PCI_MAP_M_ENABLE);
*(volatile unsigned int *) (V3_BASE + V3_PCI_MAP1) =
(INTEGRATOR_HDR0_SDRAM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_1024M |
V3_PCI_MAP_M_REG_EN |
V3_PCI_MAP_M_ENABLE);
/* PCI_BASE1 is the PCI address of the start of the window */
/* PCI_BASE1 is the PCI address of the start of the window */
*(volatile unsigned int *)(V3_BASE + V3_PCI_BASE1) = INTEGRATOR_HDR0_SDRAM_BASE;
*(volatile unsigned int *) (V3_BASE + V3_PCI_BASE1) =
INTEGRATOR_HDR0_SDRAM_BASE;
/* Set up the windows from local bus memory into PCI configuration, */
/* I/O and Memory. */
/* PCI I/O, LB_BASE2 and LB_MAP2 are used exclusively for this. */
/* Set up the windows from local bus memory into PCI configuration, */
/* I/O and Memory. */
/* PCI I/O, LB_BASE2 and LB_MAP2 are used exclusively for this. */
*(volatile unsigned short *)(V3_BASE +V3_LB_BASE2) =
((CPU_PCI_IO_ADRS >> 24) << 8) | V3_LB_BASE_M_ENABLE;
*(volatile unsigned short *)(V3_BASE + V3_LB_MAP2) = 0;
*(volatile unsigned short *) (V3_BASE + V3_LB_BASE2) =
((CPU_PCI_IO_ADRS >> 24) << 8) | V3_LB_BASE_M_ENABLE;
*(volatile unsigned short *) (V3_BASE + V3_LB_MAP2) = 0;
/* PCI Configuration, use LB_BASE1/LB_MAP1. */
/* PCI Configuration, use LB_BASE1/LB_MAP1. */
/* PCI Memory use LB_BASE0/LB_MAP0 and LB_BASE1/LB_MAP1 */
/* Map first 256Mbytes as non-prefetchable via BASE0/MAP0 */
/* (INTEGRATOR_PCI_BASE == PCI_MEM_BASE) */
/* PCI Memory use LB_BASE0/LB_MAP0 and LB_BASE1/LB_MAP1 */
/* Map first 256Mbytes as non-prefetchable via BASE0/MAP0 */
/* (INTEGRATOR_PCI_BASE == PCI_MEM_BASE) */
*(volatile unsigned int *)(V3_BASE + V3_LB_BASE0) =
INTEGRATOR_PCI_BASE | (0x80 | V3_LB_BASE_M_ENABLE);
*(volatile unsigned int *) (V3_BASE + V3_LB_BASE0) =
INTEGRATOR_PCI_BASE | (0x80 | V3_LB_BASE_M_ENABLE);
*(volatile unsigned short *)(V3_BASE + V3_LB_MAP0) =
((INTEGRATOR_PCI_BASE >> 20) << 0x4) | 0x0006;
*(volatile unsigned short *) (V3_BASE + V3_LB_MAP0) =
((INTEGRATOR_PCI_BASE >> 20) << 0x4) | 0x0006;
/* Map second 256 Mbytes as prefetchable via BASE1/MAP1 */
/* Map second 256 Mbytes as prefetchable via BASE1/MAP1 */
*(volatile unsigned int *)(V3_BASE + V3_LB_BASE1) =
INTEGRATOR_PCI_BASE | (0x84 | V3_LB_BASE_M_ENABLE);
*(volatile unsigned int *) (V3_BASE + V3_LB_BASE1) =
INTEGRATOR_PCI_BASE | (0x84 | V3_LB_BASE_M_ENABLE);
*(volatile unsigned short *)(V3_BASE + V3_LB_MAP1) =
(((INTEGRATOR_PCI_BASE + 0x10000000) >> 20) << 4) | 0x0006;
*(volatile unsigned short *) (V3_BASE + V3_LB_MAP1) =
(((INTEGRATOR_PCI_BASE + 0x10000000) >> 20) << 4) | 0x0006;
/* Allow accesses to PCI Configuration space */
/* and set up A1, A0 for type 1 config cycles */
/* Allow accesses to PCI Configuration space */
/* and set up A1, A0 for type 1 config cycles */
*(volatile unsigned short *)(V3_BASE + V3_PCI_CFG) =
((*(volatile unsigned short *)(V3_BASE + V3_PCI_CFG)) &
~(V3_PCI_CFG_M_RETRY_EN | V3_PCI_CFG_M_AD_LOW1) ) |
V3_PCI_CFG_M_AD_LOW0;
*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) =
((*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG)) &
~(V3_PCI_CFG_M_RETRY_EN | V3_PCI_CFG_M_AD_LOW1)) |
V3_PCI_CFG_M_AD_LOW0;
/* now we can allow in PCI MEMORY accesses */
/* now we can allow in PCI MEMORY accesses */
*(volatile unsigned short *)(V3_BASE + V3_PCI_CMD) =
(*(volatile unsigned short *)(V3_BASE + V3_PCI_CMD)) | V3_COMMAND_M_MEM_EN;
*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) =
(*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD)) |
V3_COMMAND_M_MEM_EN;
/* Set RST_OUT to take the PCI bus is out of reset, PCI devices can */
/* initialise and lock the V3 system register so that no one else */
/* can play with it */
/* Set RST_OUT to take the PCI bus is out of reset, PCI devices can */
/* initialise and lock the V3 system register so that no one else */
/* can play with it */
*(volatile unsigned short *)(V3_BASE + V3_SYSTEM) =
(*(volatile unsigned short *)(V3_BASE + V3_SYSTEM)) | V3_SYSTEM_M_RST_OUT;
*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) =
(*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) |
V3_SYSTEM_M_RST_OUT;
*(volatile unsigned short *)(V3_BASE + V3_SYSTEM) =
(*(volatile unsigned short *)(V3_BASE + V3_SYSTEM)) | V3_SYSTEM_M_LOCK;
*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) =
(*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) |
V3_SYSTEM_M_LOCK;
/*
* Register the hose
*/
hose->first_busno = 0;
hose->last_busno = 0xff;
/*
* Register the hose
*/
hose->first_busno = 0;
hose->last_busno = 0xff;
/* System memory space */
pci_set_region(hose->regions + 0,
0x00000000, 0x40000000, 0x01000000,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* System memory space */
pci_set_region (hose->regions + 0,
0x00000000, 0x40000000, 0x01000000,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* PCI Memory - config space */
pci_set_region(hose->regions + 1,
0x00000000, 0x62000000, 0x01000000,
PCI_REGION_MEM);
/* PCI Memory - config space */
pci_set_region (hose->regions + 1,
0x00000000, 0x62000000, 0x01000000, PCI_REGION_MEM);
/* PCI V3 regs */
pci_set_region(hose->regions + 2,
0x00000000, 0x61000000, 0x00080000,
PCI_REGION_MEM);
/* PCI V3 regs */
pci_set_region (hose->regions + 2,
0x00000000, 0x61000000, 0x00080000, PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region(hose->regions + 3,
0x00000000, 0x60000000, 0x00010000,
PCI_REGION_IO);
/* PCI I/O space */
pci_set_region (hose->regions + 3,
0x00000000, 0x60000000, 0x00010000, PCI_REGION_IO);
pci_set_ops(hose,
pci_integrator_read_byte,
pci_integrator_read__word,
pci_integrator_read_dword,
pci_integrator_write_byte,
pci_integrator_write_word,
pci_integrator_write_dword);
pci_set_ops (hose,
pci_integrator_read_byte,
pci_integrator_read__word,
pci_integrator_read_dword,
pci_integrator_write_byte,
pci_integrator_write_word, pci_integrator_write_dword);
hose->region_count = 4;
hose->region_count = 4;
pci_register_hose(hose);
pci_register_hose (hose);
pciauto_config_init(hose);
pciauto_config_device(hose, 0);
pciauto_config_init (hose);
pciauto_config_device (hose, 0);
hose->last_busno = pci_hose_scan(hose);
hose->last_busno = pci_hose_scan (hose);
}
#endif
@ -452,4 +475,3 @@ int dram_init (void)
{
return 0;
}

4
board/integratorap/u-boot.lds
View File

@ -43,8 +43,8 @@ SECTIONS
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
armboot_end_data = .;
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) }
armboot_end = .;
_end = .;
}

2
board/integratorcp/config.mk
View File

@ -1,5 +1,5 @@
#
# image should be loaded at 0x01000000
# image should be loaded at 0x01000000
#
TEXT_BASE = 0x01000000

1
board/integratorcp/integratorcp.c
View File

@ -107,4 +107,3 @@ int dram_init (void)
{
return 0;
}

4
board/integratorcp/u-boot.lds
View File

@ -43,8 +43,8 @@ SECTIONS
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
armboot_end_data = .;
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) }
armboot_end = .;
_end = .;
}

2
board/mpl/common/common_util.c
View File

@ -232,7 +232,7 @@ mpl_prg_image(uchar *ld_addr)
}
puts("OK\n");
break;
#if CONFIG_BZIP2
#ifdef CONFIG_BZIP2
case IH_COMP_BZIP2:
puts("Uncompressing (BZIP2) ... ");
{

1
board/ocotea/ocotea.c
View File

@ -474,4 +474,3 @@ int post_hotkeys_pressed(void)
return (ctrlc());
}
#endif

8
board/siemens/CCM/ccm.c
View File

@ -351,7 +351,7 @@ void reset_phy(void)
ulong value;
/* Configure all needed port pins for GPIO */
#if CFG_ETH_MDDIS_VALUE
#ifdef CFG_ETH_MDDIS_VALUE
immr->im_ioport.iop_padat |= CFG_PA_ETH_MDDIS;
#else
immr->im_ioport.iop_padat &= ~(CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET); /* Set low */
@ -369,17 +369,17 @@ void reset_phy(void)
value |= CFG_PB_ETH_POWERDOWN;
/* PHY configuration includes MDDIS and CFG1 ... CFG3 */
#if CFG_ETH_CFG1_VALUE
#ifdef CFG_ETH_CFG1_VALUE
value |= CFG_PB_ETH_CFG1;
#else
value &= ~(CFG_PB_ETH_CFG1);
#endif
#if CFG_ETH_CFG2_VALUE
#ifdef CFG_ETH_CFG2_VALUE
value |= CFG_PB_ETH_CFG2;
#else
value &= ~(CFG_PB_ETH_CFG2);
#endif
#if CFG_ETH_CFG3_VALUE
#ifdef CFG_ETH_CFG3_VALUE
value |= CFG_PB_ETH_CFG3;
#else
value &= ~(CFG_PB_ETH_CFG3);

10
board/siemens/pcu_e/pcu_e.c
View File

@ -309,7 +309,7 @@ void reset_phy (void)
/* Configure all needed port pins for GPIO */
#if PCU_E_WITH_SWAPPED_CS /* XXX */
# if CFG_ETH_MDDIS_VALUE
# ifdef CFG_ETH_MDDIS_VALUE
immr->im_ioport.iop_padat |= CFG_PA_ETH_MDDIS;
# else
immr->im_ioport.iop_padat &= ~(CFG_PA_ETH_MDDIS); /* Set low */
@ -329,23 +329,23 @@ void reset_phy (void)
/* PHY configuration includes MDDIS and CFG1 ... CFG3 */
#if !PCU_E_WITH_SWAPPED_CS
# if CFG_ETH_MDDIS_VALUE
# ifdef CFG_ETH_MDDIS_VALUE
value |= CFG_PB_ETH_MDDIS;
# else
value &= ~(CFG_PB_ETH_MDDIS);
# endif
#endif
#if CFG_ETH_CFG1_VALUE
#ifdef CFG_ETH_CFG1_VALUE
value |= CFG_PB_ETH_CFG1;
#else
value &= ~(CFG_PB_ETH_CFG1);
#endif
#if CFG_ETH_CFG2_VALUE
#ifdef CFG_ETH_CFG2_VALUE
value |= CFG_PB_ETH_CFG2;
#else
value &= ~(CFG_PB_ETH_CFG2);
#endif
#if CFG_ETH_CFG3_VALUE
#ifdef CFG_ETH_CFG3_VALUE
value |= CFG_PB_ETH_CFG3;
#else
value &= ~(CFG_PB_ETH_CFG3);

32
board/ssv/common/cmd_sled.c
View File

@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@ -28,20 +28,20 @@
#if defined(CONFIG_STATUS_LED)
/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
* !!!!! Q u i c k & D i r t y H a c k !!!!!
* !!!!! Q u i c k & D i r t y H a c k !!!!!
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
* !!!!! !!!!!
* !!!!! Next type definition was coming from original !!!!!
* !!!!! status LED driver drivers/status_led.c and !!!!!
* !!!!! should exported for using here. !!!!!
* !!!!! !!!!!
* !!!!! !!!!!
* !!!!! Next type definition was coming from original !!!!!
* !!!!! status LED driver drivers/status_led.c and !!!!!
* !!!!! should exported for using here. !!!!!
* !!!!! !!!!!
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */
typedef struct {
led_id_t mask;
int state;
int period;
int cnt;
led_id_t mask;
int state;
int period;
int cnt;
} led_dev_t;
extern led_dev_t led_dev[];
@ -141,18 +141,18 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
#ifdef STATUS_LED_RED
#ifdef STATUS_LED_YELLOW
#ifdef STATUS_LED_GREEN
#define __NAME_STR " - name: boot|red|yellow|green\n"
#define __NAME_STR " - name: boot|red|yellow|green\n"
#else
#define __NAME_STR " - name: boot|red|yellow\n"
#define __NAME_STR " - name: boot|red|yellow\n"
#endif
#else
#define __NAME_STR " - name: boot|red\n"
#define __NAME_STR " - name: boot|red\n"
#endif
#else
#define __NAME_STR " - name: boot\n"
#define __NAME_STR " - name: boot\n"
#endif
#else
#define __NAME_STR " - name: (no such defined)\n"
#define __NAME_STR " - name: (no such defined)\n"
#endif
U_BOOT_CMD (sled, 3, 0, do_sled,

4
board/trab/trab_fkt.c
View File

@ -890,7 +890,7 @@ int do_touch (char **argv)
int x, y;
if (strcmp (argv[2], "tl") == 0) {
#if CONFIG_TOUCH_WAIT_PRESSED
#ifdef CONFIG_TOUCH_WAIT_PRESSED
touch_wait_pressed();
#else
{
@ -915,7 +915,7 @@ int do_touch (char **argv)
return touch_write_clibration_values (CALIB_TL, x, y);
}
else if (strcmp (argv[2], "dr") == 0) {
#if CONFIG_TOUCH_WAIT_PRESSED
#ifdef CONFIG_TOUCH_WAIT_PRESSED
touch_wait_pressed();
#else
{

2
board/versatile/config.mk
View File

@ -1,5 +1,5 @@
#
# image should be loaded at 0x01000000
# image should be loaded at 0x01000000
#
TEXT_BASE = 0x01000000

4
board/versatile/u-boot.lds
View File

@ -43,8 +43,8 @@ SECTIONS
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
armboot_end_data = .;
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) }
armboot_end = .;
_end = .;
}

1
board/versatile/versatile.c
View File

@ -117,4 +117,3 @@ int dram_init (void)
{
return 0;
}

46
common/cmd_ide.c
View File

@ -303,16 +303,19 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (strcmp(argv[1],"read") == 0) {
ulong addr = simple_strtoul(argv[2], NULL, 16);
#if CFG_64BIT_STRTOUL
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
#else
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
#endif
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
#ifdef CFG_64BIT_STRTOUL
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
printf ("\nIDE read: device %d block # %qd, count %ld ... ",
curr_device, blk, cnt);
#else
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
printf ("\nIDE read: device %d block # %ld, count %ld ... ",
curr_device, blk, cnt);
#endif
n = ide_dev_desc[curr_device].block_read (curr_device,
blk, cnt,
@ -329,16 +332,19 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
} else if (strcmp(argv[1],"write") == 0) {
ulong addr = simple_strtoul(argv[2], NULL, 16);
#if CFG_64BIT_STRTOUL
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
#else
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
#endif
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
#ifdef CFG_64BIT_STRTOUL
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
printf ("\nIDE write: device %d block # %qd, count %ld ... ",
curr_device, blk, cnt);
#else
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
printf ("\nIDE write: device %d block # %ld, count %ld ... ",
curr_device, blk, cnt);
#endif
n = ide_write (curr_device, blk, cnt, (ulong *)addr);
@ -1161,7 +1167,7 @@ static void ide_ident (block_dev_desc_t *dev_desc)
dev_desc->lba = iop->lba_capacity;
#endif /* __BIG_ENDIAN */
#if CONFIG_LBA48
#ifdef CONFIG_LBA48
if (iop->command_set_2 & 0x0400) { /* LBA 48 support */
dev_desc->lba48support = 1;
dev_desc->lba48 = (unsigned long long)iop->lba48_capacity[0] |
@ -1203,7 +1209,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
ulong n = 0;
unsigned char c;
unsigned char pwrsave=0; /* power save */
#if CONFIG_LBA48
#ifdef CONFIG_LBA48
unsigned char lba48 = 0;
if (blknr & 0x0000fffff0000000) {
@ -1255,7 +1261,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
printf ("IDE read: device %d not ready\n", device);
break;
}
#if CONFIG_LBA48
#ifdef CONFIG_LBA48
if (lba48) {
/* write high bits */
ide_outb (device, ATA_SECT_CNT, 0);
@ -1269,7 +1275,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
ide_outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
#if CONFIG_LBA48
#ifdef CONFIG_LBA48
if (lba48) {
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device) );
ide_outb (device, ATA_COMMAND, ATA_CMD_READ_EXT);
@ -1293,7 +1299,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
}
if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF
#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF)
printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n",
device, blknr, c);
#else
@ -1322,7 +1328,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
{
ulong n = 0;
unsigned char c;
#if CONFIG_LBA48
#ifdef CONFIG_LBA48
unsigned char lba48 = 0;
if (blknr & 0x0000fffff0000000) {
@ -1345,7 +1351,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
printf ("IDE read: device %d not ready\n", device);
goto WR_OUT;
}
#if CONFIG_LBA48
#ifdef CONFIG_LBA48
if (lba48) {
/* write high bits */
ide_outb (device, ATA_SECT_CNT, 0);
@ -1359,7 +1365,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
ide_outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
#if CONFIG_LBA48
#ifdef CONFIG_LBA48
if (lba48) {
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device) );
ide_outb (device, ATA_COMMAND, ATA_CMD_WRITE_EXT);
@ -1378,7 +1384,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */
if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF
#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF)
printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n",
device, blknr, c);
#else
@ -1959,7 +1965,9 @@ static void atapi_inquiry(block_dev_desc_t * dev_desc)
((unsigned long)iobuf[5]<<16) +
((unsigned long)iobuf[6]<< 8) +
((unsigned long)iobuf[7]);
#ifdef CONFIG_LBA48
dev_desc->lba48 = 0; /* ATAPI devices cannot use 48bit addressing (ATA/ATAPI v7) */
#endif
return;
}

2
common/devices.c
View File

@ -73,7 +73,7 @@ static void drv_system_init (void)
strcpy (dev.name, "serial");
dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
dev.putc = serial_buffered_putc;
dev.puts = serial_buffered_puts;
dev.getc = serial_buffered_getc;

34
cpu/arm920t/serial.c
View File

@ -1,18 +1,18 @@
/*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
/*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
@ -28,13 +28,13 @@
#ifdef CONFIG_SERIAL1
#define UART_NR S3C24X0_UART0
#elif CONFIG_SERIAL2
#elif defined(CONFIG_SERIAL2)
# if defined(CONFIG_TRAB)
# error "TRAB supports only CONFIG_SERIAL1"
# endif
#define UART_NR S3C24X0_UART1
#elif CONFIG_SERIAL3
#elif defined(CONFIG_SERIAL3)
# if defined(CONFIG_TRAB)
# #error "TRAB supports only CONFIG_SERIAL1"
# endif

2
cpu/arm926ejs/interrupts.c
View File

@ -293,7 +293,7 @@ ulong get_timer_masked (void)
/* waits specified delay value and resets timestamp */
void udelay_masked (unsigned long usec)
{
ulong tmo, tmp;
ulong tmo;
if(usec >= 1000){ /* if "big" number, spread normalization to seconds */
tmo = usec / 1000; /* start to normalize for usec to ticks per sec */

10
cpu/i386/serial.c
View File

@ -51,7 +51,7 @@
#include <asm/io.h>
#include <asm/ibmpc.h>
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
#include <malloc.h>
#endif
@ -81,7 +81,7 @@
#define asyncLSRRxFifoError1 0x80
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
/*-----------------------------------------------------------------------------+
| Fifo
+-----------------------------------------------------------------------------*/
@ -193,7 +193,7 @@ int serial_getc(void)
{
unsigned char status = 0;
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
if (serial_buffer_active) {
return serial_buffered_getc();
}
@ -225,7 +225,7 @@ int serial_tstc(void)
{
unsigned char status;
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
if (serial_buffer_active) {
return serial_buffered_tstc();
}
@ -248,7 +248,7 @@ int serial_tstc(void)
}
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
void serial_isr(void *arg)
{

2
cpu/mpc5xxx/ide.c
View File

@ -73,7 +73,7 @@ int ide_preinit (void)
*(vu_long *) MPC5XXX_ATA_PIO2 = reg;
#ifdef CONFIG_IDE_RESET
init_ide_reset ();
init_ide_reset ();
#endif /* CONFIG_IDE_RESET */
return (0);

2
cpu/ppc4xx/405gp_pci.c
View File

@ -364,7 +364,7 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
*/
static struct pci_config_table pci_405gp_config_table[] = {
/*if VendID is 0 it terminates the table search (ie Walnut)*/
#if CFG_PCI_SUBSYS_VENDORID
#ifdef CFG_PCI_SUBSYS_VENDORID
{CFG_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge},
#endif

10
cpu/ppc4xx/cpu.c
View File

@ -70,17 +70,17 @@ int checkcpu (void)
get_sys_info(&sys_info);
#if CONFIG_405GP
#ifdef CONFIG_405GP
puts ("IBM PowerPC 405GP");
if (pvr == PVR_405GPR_RB) {
putc('r');
}
puts (" Rev. ");
#endif
#if CONFIG_405CR
#ifdef CONFIG_405CR
puts ("IBM PowerPC 405CR Rev. ");
#endif
#if CONFIG_405EP
#ifdef CONFIG_405EP
puts ("IBM PowerPC 405EP Rev. ");
#endif
switch (pvr) {
@ -89,7 +89,7 @@ int checkcpu (void)
putc('B');
break;
case PVR_405GP_RC:
#if CONFIG_405CR
#ifdef CONFIG_405CR
case PVR_405CR_RC:
#endif
putc('C');
@ -97,7 +97,7 @@ int checkcpu (void)
case PVR_405GP_RD:
putc('D');
break;
#if CONFIG_405GP
#ifdef CONFIG_405GP
case PVR_405GP_RE:
putc('E');
break;

6
cpu/ppc4xx/serial.c
View File

@ -48,7 +48,7 @@
#include <watchdog.h>
#include "vecnum.h"
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
#include <malloc.h>
#endif
@ -351,7 +351,7 @@ int serial_tstc ()
/*#define asyncRxBufferport1 ACTING_UART0_BASE+0x00 */
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
/*-----------------------------------------------------------------------------+
| Fifo
+-----------------------------------------------------------------------------*/
@ -637,7 +637,7 @@ int serial_tstc ()
}
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
void serial_isr (void *arg)
{

2
cpu/ppc4xx/speed.c
View File

@ -247,7 +247,7 @@ void get_sys_info (sys_info_t * sysInfo)
unsigned long temp1;
unsigned long lfdiv;
unsigned long m;
unsigned long prbdv0;
unsigned long prbdv0;
/* Extract configured divisors */
mfsdr( sdr_sdstp0,strp0 );

19
cpu/s3c44b0/start.S
View File

@ -71,16 +71,15 @@ _armboot_start:
.word _start
/*
* Note: _armboot_end_data and _armboot_end are defined
* by the (board-dependent) linker script.
* _armboot_end_data is the first usable FLASH address after armboot
* These are defined in the board-specific linker script.
*/
.globl _armboot_end_data
_armboot_end_data:
.word armboot_end_data
.globl _armboot_end
_armboot_end:
.word armboot_end
.globl _bss_start
_bss_start:
.word __bss_start
.globl _bss_end
_bss_end:
.word _end
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
@ -130,7 +129,7 @@ relocate: /* relocate U-Boot to RAM */
beq stack_setup
ldr r2, _armboot_start
ldr r3, _armboot_end
ldr r3, _bss_start
sub r2, r3, r2 /* r2 <- size of armboot */
add r2, r0, r2 /* r2 <- source end address */

8
cpu/sa1100/serial.c
View File

@ -66,7 +66,7 @@ void serial_setbrg (void)
Ser1UTCR1 = 0;
Ser1UTCR2 = (u32)reg;
Ser1UTCR3 = ( UTCR3_RXE | UTCR3_TXE );
#elif CONFIG_SERIAL3
#elif defined(CONFIG_SERIAL3)
/* Wait until port is ready ... */
while (Ser3UTSR1 & UTSR1_TBY) {
}
@ -107,7 +107,7 @@ void serial_putc (const char c)
while ((Ser1UTSR0 & UTSR0_TFS) == 0);
Ser1UTDR = c;
#elif CONFIG_SERIAL3
#elif defined(CONFIG_SERIAL3)
/* wait for room in the tx FIFO on SERIAL3 */
while ((Ser3UTSR0 & UTSR0_TFS) == 0);
@ -128,7 +128,7 @@ int serial_tstc (void)
{
#ifdef CONFIG_SERIAL1
return Ser1UTSR1 & UTSR1_RNE;
#elif CONFIG_SERIAL3
#elif defined(CONFIG_SERIAL3)
return Ser3UTSR1 & UTSR1_RNE;
#endif
}
@ -144,7 +144,7 @@ int serial_getc (void)
while (!(Ser1UTSR1 & UTSR1_RNE));
return (char) Ser1UTDR & 0xff;
#elif CONFIG_SERIAL3
#elif defined(CONFIG_SERIAL3)
while (!(Ser3UTSR1 & UTSR1_RNE));
return (char) Ser3UTDR & 0xff;

8
disk/part.c
View File

@ -44,7 +44,7 @@
*/
void dev_print (block_dev_desc_t *dev_desc)
{
#if CONFIG_LBA48
#ifdef CONFIG_LBA48
uint64_t lba512; /* number of blocks if 512bytes block size */
#else
lbaint_t lba512;
@ -87,7 +87,7 @@ void dev_print (block_dev_desc_t *dev_desc)
if ((dev_desc->lba * dev_desc->blksz)>0L) {
ulong mb, mb_quot, mb_rem, gb, gb_quot, gb_rem;
lbaint_t lba;
#if CONFIG_LBA48
#ifdef CONFIG_LBA48
if (dev_desc->lba48support)
lba = dev_desc->lba48;
else
@ -103,11 +103,11 @@ void dev_print (block_dev_desc_t *dev_desc)
gb = mb / 1024;
gb_quot = gb / 10;
gb_rem = gb - (10 * gb_quot);
#if CONFIG_LBA48
#ifdef CONFIG_LBA48
if (dev_desc->lba48support)
printf (" Supports 48-bit addressing\n");
#endif
#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF
#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF)
printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%qd x %ld)\n",
mb_quot, mb_rem,
gb_quot, gb_rem,

4
doc/README.adnpesc1
View File

@ -43,7 +43,7 @@ choices & assume that the monitor is placed at the end of a memory
resource. So you must make sure TEXT_BASE is chosen appropriately.
This is very important if you plan to move your memory to another
place as configured at this time!
-The heap is placed below the monitor (U-Boot code).
-Global data is placed below the heap.
-The stack is placed below global data (&grows down).
@ -190,7 +190,7 @@ you have to check-up the next environment variables:
2. appl_entry_addr
- Nios application area start address (usually in Flash)
- this is the startup address for autoboot
- this is the startup address for autoboot
- each Nios application code we want to update will be copied
to this address
- default is CFG_ADNPESC1_NIOS_APPL_ENTRY

2
drivers/cs8900.h
View File

@ -47,7 +47,7 @@
#define CS8900_OFF 0x02
#define CS8900_BUS16_0 *(volatile u8 *)(CS8900_BASE+0x00)
#define CS8900_BUS16_1 *(volatile u8 *)(CS8900_BASE+0x01)
#elif CS8900_BUS32
#elif defined(CS8900_BUS32)
/* 32 bit aligned registers, 16 bit wide (we ignore upper 16 bits) */
#define CS8900_REG u32
#define CS8900_OFF 0x04

2
drivers/pci.c
View File

@ -163,7 +163,7 @@ pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
for (hose = hose_head; hose; hose = hose->next)
{
#if CFG_SCSI_SCAN_BUS_REVERSE
#ifdef CFG_SCSI_SCAN_BUS_REVERSE
for (bus = hose->last_busno; bus >= hose->first_busno; bus--)
#else
for (bus = hose->first_busno; bus <= hose->last_busno; bus++)

167
drivers/serial_pl010.c
View File

@ -41,137 +41,134 @@
#define NUM_PORTS 2
#define CONSOLE_PORT CONFIG_CONS_INDEX
#define baudRate CONFIG_BAUDRATE
static volatile unsigned char * const port[NUM_PORTS] = {(void*)(CFG_SERIAL0),
(void*)(CFG_SERIAL1)};
static volatile unsigned char *const port[NUM_PORTS] = {
(void *) (CFG_SERIAL0),
(void *) (CFG_SERIAL1)
};
static void pl010_putc(int portnum, char c);
static int pl010_getc(int portnum);
static int pl010_tstc(int portnum);
static void pl010_putc (int portnum, char c);
static int pl010_getc (int portnum);
static int pl010_tstc (int portnum);
int serial_init (void)
{
unsigned int temp;
unsigned int divisor;
unsigned int divisor;
/*
** First, disable everything.
*/
IO_WRITE(port[CONSOLE_PORT] + UART_PL010_CR, 0x0);
/*
** First, disable everything.
*/
IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, 0x0);
/*
** Set baud rate
**
*/
switch (baudRate) {
case 9600:
divisor = UART_PL010_BAUD_9600;
break;
/*
** Set baud rate
**
*/
switch (baudRate) {
case 9600:
divisor = UART_PL010_BAUD_9600;
break;
case 19200:
divisor = UART_PL010_BAUD_9600;
break;
case 19200:
divisor = UART_PL010_BAUD_9600;
break;
case 38400:
divisor = UART_PL010_BAUD_38400;
break;
case 38400:
divisor = UART_PL010_BAUD_38400;
break;
case 57600:
divisor = UART_PL010_BAUD_57600;
break;
case 57600:
divisor = UART_PL010_BAUD_57600;
break;
case 115200:
divisor = UART_PL010_BAUD_115200;
break;
case 115200:
divisor = UART_PL010_BAUD_115200;
break;
default:
divisor = UART_PL010_BAUD_38400;
}
IO_WRITE(port[CONSOLE_PORT] + UART_PL010_LCRM, ((divisor & 0xf00) >> 8));
IO_WRITE(port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff));
default:
divisor = UART_PL010_BAUD_38400;
}
/*
** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
*/
IO_WRITE(port[CONSOLE_PORT] + UART_PL010_LCRH,
(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN));
IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRM,
((divisor & 0xf00) >> 8));
IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff));
/*
** Finally, enable the UART
*/
IO_WRITE(port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN));
/*
** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
*/
IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRH,
(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN));
return (0);
/*
** Finally, enable the UART
*/
IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN));
return (0);
}
void
serial_putc(const char c)
void serial_putc (const char c)
{
if (c == '\n')
pl010_putc(CONSOLE_PORT, '\r');
pl010_putc (CONSOLE_PORT, '\r');
pl010_putc(CONSOLE_PORT, c);
pl010_putc (CONSOLE_PORT, c);
}
void
serial_puts (const char *s)
void serial_puts (const char *s)
{
while (*s) {
serial_putc (*s++);
}
}
int
serial_getc(void)
int serial_getc (void)
{
return pl010_getc(CONSOLE_PORT);
return pl010_getc (CONSOLE_PORT);
}
int
serial_tstc(void)
int serial_tstc (void)
{
return pl010_tstc(CONSOLE_PORT);
return pl010_tstc (CONSOLE_PORT);
}
void
serial_setbrg (void)
void serial_setbrg (void)
{
}
static void pl010_putc(int portnum, char c)
static void pl010_putc (int portnum, char c)
{
/* Wait until there is space in the FIFO */
while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF);
/* Send the character */
IO_WRITE(port[portnum] + UART_PL01x_DR, c);
/* Wait until there is space in the FIFO */
while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF);
/* Send the character */
IO_WRITE (port[portnum] + UART_PL01x_DR, c);
}
static int pl010_getc(int portnum)
static int pl010_getc (int portnum)
{
unsigned int data;
unsigned int data;
/* Wait until there is data in the FIFO */
while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE);
data = IO_READ(port[portnum] + UART_PL01x_DR);
/* Check for an error flag */
if (data & 0xFFFFFF00)
{
/* Clear the error */
IO_WRITE(port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF);
return -1;
}
return (int)data;
/* Wait until there is data in the FIFO */
while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE);
data = IO_READ (port[portnum] + UART_PL01x_DR);
/* Check for an error flag */
if (data & 0xFFFFFF00) {
/* Clear the error */
IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF);
return -1;
}
return (int) data;
}
static int pl010_tstc(int portnum)
static int pl010_tstc (int portnum)
{
return !(IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE);
return !(IO_READ (port[portnum] + UART_PL01x_FR) &
UART_PL01x_FR_RXFE);
}
#endif

162
drivers/serial_pl011.c
View File

@ -38,138 +38,136 @@
#define IO_READ(addr) (*(volatile unsigned int *)(addr))
/*
* IntegratorCP has two UARTs, use the first one, at 38400-8-N-1
* IntegratorCP has two UARTs, use the first one, at 38400-8-N-1
* Versatile PB has four UARTs.
*/
#define NUM_PORTS 2
#define CONSOLE_PORT CONFIG_CONS_INDEX
#define baudRate CONFIG_BAUDRATE
static volatile unsigned char * const port[NUM_PORTS] = {(void*)(CFG_SERIAL0),
(void*)(CFG_SERIAL1)};
static volatile unsigned char *const port[NUM_PORTS] = {
(void *) (CFG_SERIAL0),
(void *) (CFG_SERIAL1)
};
static void pl011_putc(int portnum, char c);
static int pl011_getc(int portnum);
static int pl011_tstc(int portnum);
static void pl011_putc (int portnum, char c);
static int pl011_getc (int portnum);
static int pl011_tstc (int portnum);
int serial_init (void)
{
unsigned int temp;
unsigned int divider;
unsigned int remainder;
unsigned int fraction;
unsigned int temp;
unsigned int divider;
unsigned int remainder;
unsigned int fraction;
/*
** First, disable everything.
*/
IO_WRITE(port[CONSOLE_PORT] + UART_PL011_CR, 0x0);
/*
** First, disable everything.
*/
IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, 0x0);
/*
** Set baud rate
**
** IBRD = UART_CLK / (16 * BAUD_RATE)
** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
*/
/*
** Set baud rate
**
** IBRD = UART_CLK / (16 * BAUD_RATE)
** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
*/
#ifdef CONFIG_VERSATILE
temp = 16 * baudRate;
divider = 24000000 / temp;
remainder = 24000000 % temp;
temp = (8 * remainder) / baudRate;
fraction = (temp >> 1) + (temp & 1);
temp = 16 * baudRate;
divider = 24000000 / temp;
remainder = 24000000 % temp;
temp = (8 * remainder) / baudRate;
fraction = (temp >> 1) + (temp & 1);
#endif
#ifdef CONFIG_INTEGRATOR
temp = 16 * baudRate;
divider = 14745600 / temp;
remainder = 14745600 % temp;
temp = (8 * remainder) / baudRate;
fraction = (temp >> 1) + (temp & 1);
temp = 16 * baudRate;
divider = 14745600 / temp;
remainder = 14745600 % temp;
temp = (8 * remainder) / baudRate;
fraction = (temp >> 1) + (temp & 1);
#endif
IO_WRITE(port[CONSOLE_PORT] + UART_PL011_IBRD, divider);
IO_WRITE(port[CONSOLE_PORT] + UART_PL011_FBRD, fraction);
/*
** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
*/
IO_WRITE(port[CONSOLE_PORT] + UART_PL011_LCRH,
(UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN));
IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider);
IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction);
/*
** Finally, enable the UART
*/
IO_WRITE(port[CONSOLE_PORT] + UART_PL011_CR,
(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE));
/*
** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
*/
IO_WRITE (port[CONSOLE_PORT] + UART_PL011_LCRH,
(UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN));
return (0);
/*
** Finally, enable the UART
*/
IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR,
(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
UART_PL011_CR_RXE));
return (0);
}
void
serial_putc(const char c)
void serial_putc (const char c)
{
if (c == '\n')
pl011_putc(CONSOLE_PORT, '\r');
pl011_putc (CONSOLE_PORT, '\r');
pl011_putc(CONSOLE_PORT, c);
pl011_putc (CONSOLE_PORT, c);
}
void
serial_puts (const char *s)
void serial_puts (const char *s)
{
while (*s) {
serial_putc (*s++);
}
}
int
serial_getc(void)
int serial_getc (void)
{
return pl011_getc(CONSOLE_PORT);
return pl011_getc (CONSOLE_PORT);
}
int
serial_tstc(void)
int serial_tstc (void)
{
return pl011_tstc(CONSOLE_PORT);
return pl011_tstc (CONSOLE_PORT);
}
void
serial_setbrg (void)
void serial_setbrg (void)
{
}
static void pl011_putc(int portnum, char c)
static void pl011_putc (int portnum, char c)
{
/* Wait until there is space in the FIFO */
while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF);
/* Send the character */
IO_WRITE(port[portnum] + UART_PL01x_DR, c);
/* Wait until there is space in the FIFO */
while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF);
/* Send the character */
IO_WRITE (port[portnum] + UART_PL01x_DR, c);
}
static int pl011_getc(int portnum)
static int pl011_getc (int portnum)
{
unsigned int data;
unsigned int data;
/* Wait until there is data in the FIFO */
while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE);
data = IO_READ(port[portnum] + UART_PL01x_DR);
/* Check for an error flag */
if (data & 0xFFFFFF00)
{
/* Clear the error */
IO_WRITE(port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF);
return -1;
}
return (int)data;
/* Wait until there is data in the FIFO */
while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE);
data = IO_READ (port[portnum] + UART_PL01x_DR);
/* Check for an error flag */
if (data & 0xFFFFFF00) {
/* Clear the error */
IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF);
return -1;
}
return (int) data;
}
static int pl011_tstc(int portnum)
static int pl011_tstc (int portnum)
{
return !(IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE);
return !(IO_READ (port[portnum] + UART_PL01x_FR) &
UART_PL01x_FR_RXFE);
}
#endif

20
drivers/serial_pl011.h
View File

@ -23,11 +23,11 @@
*/
/*
* ARM PrimeCell UART's (PL010 & PL011)
* ARM PrimeCell UART's (PL010 & PL011)
* ------------------------------------
*
*
* Definitions common to both PL010 & PL011
*
*
*/
#define UART_PL01x_DR 0x00 /* Data read or written from the interface. */
#define UART_PL01x_RSR 0x04 /* Receive status register (Read). */
@ -46,9 +46,9 @@
#define UART_PL01x_FR_BUSY 0x08
#define UART_PL01x_FR_TMSK (UART_PL01x_FR_TXFF + UART_PL01x_FR_BUSY)
/*
/*
* PL010 definitions
*
*
*/
#define UART_PL010_LCRH 0x08 /* Line control register, high byte. */
#define UART_PL010_LCRM 0x0C /* Line control register, middle byte. */
@ -57,7 +57,7 @@
#define UART_PL010_IIR 0x1C /* Interrupt indentification register (Read). */
#define UART_PL010_ICR 0x1C /* Interrupt clear register (Write). */
#define UART_PL010_ILPR 0x20 /* IrDA low power counter register. */
#define UART_PL010_CR_LPE (1 << 7)
#define UART_PL010_CR_RTIE (1 << 6)
#define UART_PL010_CR_TIE (1 << 5)
@ -66,7 +66,7 @@
#define UART_PL010_CR_IIRLP (1 << 2)
#define UART_PL010_CR_SIREN (1 << 1)
#define UART_PL010_CR_UARTEN (1 << 0)
#define UART_PL010_LCRH_WLEN_8 (3 << 5)
#define UART_PL010_LCRH_WLEN_7 (2 << 5)
#define UART_PL010_LCRH_WLEN_6 (1 << 5)
@ -89,9 +89,9 @@
#define UART_PL010_BAUD_4800 191
#define UART_PL010_BAUD_2400 383
#define UART_PL010_BAUD_1200 767
/*
/*
* PL011 definitions
*
*
*/
#define UART_PL011_IBRD 0x24
#define UART_PL011_FBRD 0x28
@ -99,7 +99,7 @@
#define UART_PL011_CR 0x30
#define UART_PL011_IMSC 0x38
#define UART_PL011_PERIPH_ID0 0xFE0
#define UART_PL011_LCRH_SPS (1 << 7)
#define UART_PL011_LCRH_WLEN_8 (3 << 5)
#define UART_PL011_LCRH_WLEN_7 (2 << 5)

74
drivers/smc91111.c
View File

@ -7,7 +7,7 @@
. Rolf Offermanns <rof@sysgo.de>
.
. Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
. Developed by Simple Network Magic Corporation (SNMC)
. Developed by Simple Network Magic Corporation (SNMC)
. Copyright (C) 1996 by Erik Stahlman (ES)
.
. This program is free software; you can redistribute it and/or modify
@ -17,12 +17,12 @@
.
. This program is distributed in the hope that it will be useful,
. but WITHOUT ANY WARRANTY; without even the implied warranty of
. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
. GNU General Public License for more details.
.
. You should have received a copy of the GNU General Public License
. along with this program; if not, write to the Free Software
. Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
. Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
.
. Information contained in this file was obtained from the LAN91C111
. manual from SMC. To get a copy, if you really want one, you can find
@ -36,27 +36,27 @@
. EEPROM interface for configuration
.
. Arguments:
. io = for the base address
. io = for the base address
. irq = for the IRQ
.
. author:
. Erik Stahlman ( erik@vt.edu )
. Daris A Nevil ( dnevil@snmc.com )
. Erik Stahlman ( erik@vt.edu )
. Daris A Nevil ( dnevil@snmc.com )
.
.
. Hardware multicast code from Peter Cammaert ( pc@denkart.be )
.
. Sources:
. o SMSC LAN91C111 databook (www.smsc.com)
. o smc9194.c by Erik Stahlman
. o skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov )
. o SMSC LAN91C111 databook (www.smsc.com)
. o smc9194.c by Erik Stahlman
. o skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov )
.
. History:
. 06/19/03 Richard Woodruff Made u-boot environment aware and added mac addr checks.
. 06/19/03 Richard Woodruff Made u-boot environment aware and added mac addr checks.
. 10/17/01 Marco Hasewinkel Modify for DNP/1110
. 07/25/01 Woojung Huh Modify for ADS Bitsy
. 04/25/01 Daris A Nevil Initial public release through SMSC
. 03/16/01 Daris A Nevil Modified smc9194.c for use with LAN91C111
. 07/25/01 Woojung Huh Modify for ADS Bitsy
. 04/25/01 Daris A Nevil Initial public release through SMSC
. 03/16/01 Daris A Nevil Modified smc9194.c for use with LAN91C111
----------------------------------------------------------------------------*/
#include <common.h>
@ -113,7 +113,7 @@ static const char version[] =
/*------------------------------------------------------------------------
.
. The internal workings of the driver. If you are changing anything
. The internal workings of the driver. If you are changing anything
. here with the SMC stuff, you should have the datasheet and know
. what you are doing.
.
@ -138,7 +138,7 @@ static const char version[] =
#define ETH_ZLEN 60
#ifdef CONFIG_SMC_USE_32_BIT
#ifdef CONFIG_SMC_USE_32_BIT
#define USE_32_BIT 1
#else
#undef USE_32_BIT
@ -253,7 +253,7 @@ void smc_get_macaddr( byte *addr ) {
#endif /* 0 */
/***********************************************
* Show available memory *
* Show available memory *
***********************************************/
void dump_memory_info(void)
{
@ -337,8 +337,8 @@ static inline void smc_wait_mmu_release_complete (void)
/*
. Function: smc_reset( void )
. Purpose:
. This sets the SMC91111 chip to its normal state, hopefully from whatever
. mess that any other DOS driver has put it in.
. This sets the SMC91111 chip to its normal state, hopefully from whatever
. mess that any other DOS driver has put it in.
.
. Maybe I should reset more registers to defaults in here? SOFTRST should
. do that for me.
@ -436,7 +436,7 @@ static void smc_enable()
. (1) maybe utilize power down mode.
. Why not yet? Because while the chip will go into power down mode,
. the manual says that it will wake up in response to any I/O requests
. in the register space. Empirical results do not show this working.
. in the register space. Empirical results do not show this working.
*/
static void smc_shutdown()
{
@ -459,7 +459,7 @@ static void smc_shutdown()
. This sends the actual packet to the SMC9xxx chip.
.
. Algorithm:
. First, see if a saved_skb is available.
. First, see if a saved_skb is available.
. ( this should NOT be called if there is no 'saved_skb'
. Now, find the packet number that the chip allocated
. Point the data pointers at it in memory
@ -467,9 +467,9 @@ static void smc_shutdown()
. Dump the packet to chip memory
. Check if a last byte is needed ( odd length packet )
. if so, set the control flag right
. Tell the card to send it
. Tell the card to send it
. Enable the transmit interrupt, so I know if it failed
. Free the kernel data if I actually sent it.
. Free the kernel data if I actually sent it.
*/
static int smc_send_packet (volatile void *packet, int packet_length)
{
@ -512,9 +512,9 @@ static int smc_send_packet (volatile void *packet, int packet_length)
SMC_outw (MC_ALLOC | numPages, MMU_CMD_REG);
/* FIXME: the ALLOC_INT bit never gets set *
* so the following will always give a *
* memory allocation error. *
* same code works in armboot though *
* so the following will always give a *
* memory allocation error. *
* same code works in armboot though *
* -ro
*/
@ -583,7 +583,7 @@ again:
/* send the actual data
. I _think_ it's faster to send the longs first, and then
. mop up by sending the last word. It depends heavily
. on alignment, at least on the 486. Maybe it would be
. on alignment, at least on the 486. Maybe it would be
. a good idea to check which is optimal? But that could take
. almost as much time as is saved?
*/
@ -596,7 +596,7 @@ again:
SMC_outsw (SMC91111_DATA_REG, buf, (length) >> 1);
#endif /* USE_32_BIT */
/* Send the last byte, if there is one. */
/* Send the last byte, if there is one. */
if ((length & 1) == 0) {
SMC_outw (0, SMC91111_DATA_REG);
} else {
@ -690,7 +690,7 @@ static int smc_open (bd_t * bd)
err = smc_get_ethaddr (bd); /* set smc_mac_addr, and sync it with u-boot globals */
if (err < 0) {
memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */
memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */
return (-1); /* upper code ignores this, but NOT bi_enetaddr */
}
#ifdef USE_32_BIT
@ -723,10 +723,10 @@ static int smc_open (bd_t * bd)
*/
static int smc_rcv()
{
int packet_number;
int packet_number;
word status;
word packet_length;
int is_error = 0;
int is_error = 0;
#ifdef USE_32_BIT
dword stat_len;
#endif
@ -749,8 +749,8 @@ static int smc_rcv()
status = stat_len & 0xffff;
packet_length = stat_len >> 16;
#else
status = SMC_inw( SMC91111_DATA_REG );
packet_length = SMC_inw( SMC91111_DATA_REG );
status = SMC_inw( SMC91111_DATA_REG );
packet_length = SMC_inw( SMC91111_DATA_REG );
#endif
packet_length &= 0x07ff; /* mask off top bits */
@ -773,7 +773,7 @@ static int smc_rcv()
/* QUESTION: Like in the TX routine, do I want
to send the DWORDs or the bytes first, or some
mixture. A mixture might improve already slow PIO
performance */
performance */
SMC_insl( SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 2 );
/* read the left over bytes */
if (packet_length & 3) {
@ -825,7 +825,7 @@ static int smc_rcv()
. smc_close
.
. this makes the board clean up everything that it can
. and not talk to the outside world. Caused by
. and not talk to the outside world. Caused by
. an 'ifconfig ethX down'
.
-----------------------------------------------------*/
@ -1380,7 +1380,7 @@ int smc_get_ethaddr (bd_t * bd)
s = s_env_mac;
}
for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */
for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */
v_env_mac[reg] = s ? simple_strtoul (s, &e, 16) : 0;
if (s)
s = (*e) ? e + 1 : e;
@ -1403,7 +1403,7 @@ int smc_get_ethaddr (bd_t * bd)
v_mac = v_env_mac; /* always use a good env over a ROM */
}
if (env_present && rom_valid) { /* if both env and ROM are good */
if (env_present && rom_valid) { /* if both env and ROM are good */
if (memcmp (v_env_mac, v_rom_mac, 6) != 0) {
printf ("\nWarning: MAC addresses don't match:\n");
printf ("\tHW MAC address: "
@ -1422,7 +1422,7 @@ int smc_get_ethaddr (bd_t * bd)
memcpy (bd->bi_enetaddr, v_mac, 6); /* update global address to match env (allows env changing) */
smc_set_mac_addr (v_mac); /* use old function to update smc default */
PRINTK("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", v_mac[0], v_mac[1],
v_mac[2], v_mac[3], v_mac[4], v_mac[5]);
v_mac[2], v_mac[3], v_mac[4], v_mac[5]);
return (0);
}

2
drivers/usbtty.c
View File

@ -314,7 +314,7 @@ int drv_usbtty_init (void)
int rc;
char * sn;
int snlen;
if (!(sn = getenv("serial#"))) {
sn = "000000000000";
}

2
include/ata.h
View File

@ -208,7 +208,7 @@ typedef struct hd_driveid {
unsigned short word92; /* reserved (word 92) */
unsigned short hw_config; /* hardware config */
unsigned short words94_99[6];/* reserved words 94-99 */
//unsigned long long lba48_capacity; /* 4 16bit values containing lba 48 total number of sectors */
/*unsigned long long lba48_capacity; /--* 4 16bit values containing lba 48 total number of sectors */
unsigned short lba48_capacity[4]; /* 4 16bit values containing lba 48 total number of sectors */
unsigned short words104_125[22];/* reserved words 104-125 */
unsigned short last_lun; /* reserved (word 126) */

4
include/common.h
View File

@ -134,7 +134,7 @@ typedef void (interrupt_handler_t)(void *);
* Function Prototypes
*/
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
void serial_buffered_init (void);
void serial_buffered_putc (const char);
void serial_buffered_puts (const char *);
@ -459,7 +459,7 @@ int init_timebase (void);
/* lib_generic/vsprintf.c */
ulong simple_strtoul(const char *cp,char **endp,unsigned int base);
#if CFG_64BIT_VSPRINTF
#ifdef CFG_64BIT_VSPRINTF
unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base);
#endif
long simple_strtol(const char *cp,char **endp,unsigned int base);

4
include/configs/MPC8266ADS.h
View File

@ -175,7 +175,7 @@
#define CONFIG_BOOT_ROOT_INITRD 0 /* Use ram disk for the root file system */
#define CONFIG_BOOT_ROOT_NFS 1 /* Use a NFS mounted root file system */
#if CONFIG_BOOT_ROOT_INITRD
#ifdef CONFIG_BOOT_ROOT_INITRD
#define CONFIG_BOOTCOMMAND \
"version;" \
"echo;" \
@ -185,7 +185,7 @@
"bootm"
#endif /* CONFIG_BOOT_ROOT_INITRD */
#if CONFIG_BOOT_ROOT_NFS
#ifdef CONFIG_BOOT_ROOT_NFS
#define CONFIG_BOOTCOMMAND \
"version;" \
"echo;" \

62
include/configs/OCOTEA.h
View File

@ -21,7 +21,7 @@
*/
/************************************************************************
* 1 March 2004 Travis B. Sawyer <tsawyer@sandburst.com>
* 1 March 2004 Travis B. Sawyer <tsawyer@sandburst.com>
* Adapted to current Das U-Boot source
***********************************************************************/
@ -37,7 +37,7 @@
* High Level Configuration Options
*----------------------------------------------------------------------*/
#define CONFIG_OCOTEA 1 /* Board is ebony */
#define CONFIG_440_GX 1 /* Specifc GX support */
#define CONFIG_440_GX 1 /* Specifc GX support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
@ -68,8 +68,8 @@
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
@ -110,8 +110,8 @@
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
#define SPD_EEPROM_ADDRESS {0x53,0x52} /* SPD i2c spd addresses */
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
#define SPD_EEPROM_ADDRESS {0x53,0x52} /* SPD i2c spd addresses */
/*-----------------------------------------------------------------------
* I2C
@ -129,7 +129,7 @@
#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_ENV_OVERWRITE 1
#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
#define CFG_ENV_ADDR \
@ -146,18 +146,18 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_NET_MULTI 1
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#define CONFIG_PHY1_ADDR 2
#define CONFIG_PHY2_ADDR 0x10
#define CONFIG_PHY3_ADDR 0x18
#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 10.1.2.3
#define CONFIG_ETHADDR 00:04:AC:E3:28:8A
#define CONFIG_ETHADDR1 00:04:AC:E3:28:8B
#define CONFIG_ETHADDR2 00:04:AC:E3:28:8C
#define CONFIG_ETHADDR3 00:04:AC:E3:28:8D
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_SERVERIP 10.1.2.2
#define CONFIG_PHY1_ADDR 2
#define CONFIG_PHY2_ADDR 0x10
#define CONFIG_PHY3_ADDR 0x18
#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 10.1.2.3
#define CONFIG_ETHADDR 00:04:AC:E3:28:8A
#define CONFIG_ETHADDR1 00:04:AC:E3:28:8B
#define CONFIG_ETHADDR2 00:04:AC:E3:28:8C
#define CONFIG_ETHADDR3 00:04:AC:E3:28:8D
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_SERVERIP 10.1.2.2
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_PCI | \
@ -167,10 +167,10 @@
CFG_CMD_DHCP | \
CFG_CMD_DATE | \
CFG_CMD_BEDBUG | \
CFG_CMD_PING | \
CFG_CMD_DIAG | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_PING | \
CFG_CMD_DIAG | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_ELF )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@ -206,17 +206,17 @@
*-----------------------------------------------------------------------
*/
/* General PCI */
#define CONFIG_PCI /* include pci support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
#define CONFIG_PCI /* include pci support */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
/* Board-specific PCI */
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data

2
include/configs/TOP860.h
View File

@ -364,7 +364,7 @@
* 5 0 00000
*/
#define SCCR_MASK 0
#if CONFIG_EBDF
#ifdef CONFIG_EBDF
#define CFG_SCCR (SCCR_COM11 | SCCR_TBS | SCCR_EBDF01)
#else
#define CFG_SCCR (SCCR_COM11 | SCCR_TBS)

4
include/configs/gcplus.h
View File

@ -156,14 +156,14 @@
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
#else
/* REVISIT: This doesn't work on ADS GCPlus just yet:
/* REVISIT: This doesn't work on ADS GCPlus just yet: */
#define CFG_FLASH_CFI 1 /* flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
#define CFG_MAX_FLASH_BANKS 1 /* max # of memory banks */
#define CFG_FLASH_INCREMENT 0 /* there is only one bank */
#define CFG_MAX_FLASH_SECT 128 /* max # of sectors on one chip */
//#define CFG_FLASH_PROTECTION 1 /* hardware flash protection */
/*#define CFG_FLASH_PROTECTION 1 /--* hardware flash protection */
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
#endif

51
include/configs/integratorap.h
View File

@ -52,6 +52,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* PL010 Configuration
@ -63,9 +64,9 @@
#define CFG_SERIAL0 0x16000000
#define CFG_SERIAL1 0x17000000
//#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI)
//#define CONFIG_NET_MULTI
//#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
/*#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI) */
/*#define CONFIG_NET_MULTI */
/*#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */
#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY)
@ -74,7 +75,7 @@
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
#define CONFIG_BOOTCOMMAND ""
/*
@ -129,7 +130,7 @@
* PCI definitions
*/
//#define CONFIG_PCI /* include pci support */
/*#define CONFIG_PCI /--* include pci support */
#undef CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
#define DEBUG
@ -141,28 +142,28 @@
#define INTEGRATOR_BOOT_ROM_BASE 0x20000000
#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000
// PCI Base area
/* PCI Base area */
#define INTEGRATOR_PCI_BASE 0x40000000
#define INTEGRATOR_PCI_SIZE 0x3FFFFFFF
// memory map as seen by the CPU on the local bus
#define CPU_PCI_IO_ADRS 0x60000000 // PCI I/O space base
#define CPU_PCI_IO_SIZE 0x10000
/* memory map as seen by the CPU on the local bus */
#define CPU_PCI_IO_ADRS 0x60000000 /* PCI I/O space base */
#define CPU_PCI_IO_SIZE 0x10000
#define CPU_PCI_CNFG_ADRS 0x61000000 // PCI config space
#define CPU_PCI_CNFG_ADRS 0x61000000 /* PCI config space */
#define CPU_PCI_CNFG_SIZE 0x1000000
#define PCI_MEM_BASE 0x40000000 // 512M to xxx
// unused 256M from A0000000-AFFFFFFF might be used for I2O ???
#define INTEGRATOR_PCI_IO_BASE 0x60000000 // 16M to xxx
// unused (128-16)M from B1000000-B7FFFFFF
#define PCI_CONFIG_BASE 0x61000000 // 16M to xxx
// unused ((128-16)M - 64K) from XXX
#define PCI_MEM_BASE 0x40000000 /* 512M to xxx */
/* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */
#define INTEGRATOR_PCI_IO_BASE 0x60000000 /* 16M to xxx */
/* unused (128-16)M from B1000000-B7FFFFFF */
#define PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */
/* unused ((128-16)M - 64K) from XXX */
#define PCI_V3_BASE 0x62000000
// V3 PCI bridge controller
#define V3_BASE 0x62000000 // V360EPC registers
/* V3 PCI bridge controller */
#define V3_BASE 0x62000000 /* V360EPC registers */
#define PCI_ENET0_IOADDR (CPU_PCI_IO_ADRS)
#define PCI_ENET0_MEMADDR (PCI_MEM_BASE)
@ -221,16 +222,16 @@
#define V3_MAIL_RD_STAT 0x000000DA
#define V3_QBA_MAP 0x000000DC
// SYSTEM register bits
/* SYSTEM register bits */
#define V3_SYSTEM_M_RST_OUT (1 << 15)
#define V3_SYSTEM_M_LOCK (1 << 14)
// PCI_CFG bits
/* PCI_CFG bits */
#define V3_PCI_CFG_M_RETRY_EN (1 << 10)
#define V3_PCI_CFG_M_AD_LOW1 (1 << 9)
#define V3_PCI_CFG_M_AD_LOW0 (1 << 8)
// PCI MAP register bits (PCI -> Local bus)
/* PCI MAP register bits (PCI -> Local bus) */
#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000
#define V3_PCI_MAP_M_RD_POST_INH (1 << 15)
#define V3_PCI_MAP_M_ROM_SIZE (1 << 11 | 1 << 10)
@ -239,20 +240,20 @@
#define V3_PCI_MAP_M_REG_EN (1 << 1)
#define V3_PCI_MAP_M_ENABLE (1 << 0)
// 9 => 512M window size
/* 9 => 512M window size */
#define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090
// A => 1024M window size
/* A => 1024M window size */
#define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0
// LB_BASE register bits (Local bus -> PCI)
/* LB_BASE register bits (Local bus -> PCI) */
#define V3_LB_BASE_M_MAP_ADR 0xFFF00000
#define V3_LB_BASE_M_SWAP (1 << 8 | 1 << 9)
#define V3_LB_BASE_M_ADR_SIZE 0x000000F0
#define V3_LB_BASE_M_PREFETCH (1 << 3)
#define V3_LB_BASE_M_ENABLE (1 << 0)
// PCI COMMAND REGISTER bits
/* PCI COMMAND REGISTER bits */
#define V3_COMMAND_M_FBB_EN (1 << 9)
#define V3_COMMAND_M_SERR_EN (1 << 8)
#define V3_COMMAND_M_PAR_EN (1 << 6)

3
include/configs/integratorcp.h
View File

@ -52,6 +52,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
@ -78,7 +79,7 @@
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0"
#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0"
#define CONFIG_BOOTCOMMAND "bootp ; bootm"
/*

4
include/configs/ppmc8260.h
View File

@ -241,7 +241,7 @@
#define CONFIG_BOOT_ROOT_INITRD 0 /* Use ram disk for the root file system */
#define CONFIG_BOOT_ROOT_NFS 1 /* Use a NFS mounted root file system */
#if CONFIG_BOOT_ROOT_INITRD
#ifdef CONFIG_BOOT_ROOT_INITRD
#define CONFIG_BOOTCOMMAND \
"version;" \
"echo;" \
@ -251,7 +251,7 @@
"bootm"
#endif /* CONFIG_BOOT_ROOT_INITRD */
#if CONFIG_BOOT_ROOT_NFS
#ifdef CONFIG_BOOT_ROOT_NFS
#define CONFIG_BOOTCOMMAND \
"version;" \
"echo;" \

4
include/configs/sacsng.h
View File

@ -446,7 +446,7 @@
#define CONFIG_BOOT_ROOT_INITRD 0 /* Use ram disk for the root file system */
#define CONFIG_BOOT_ROOT_NFS 1 /* Use a NFS mounted root file system */
#if CONFIG_BOOT_ROOT_INITRD
#ifdef CONFIG_BOOT_ROOT_INITRD
#define CONFIG_BOOTCOMMAND \
"version;" \
"echo;" \
@ -457,7 +457,7 @@
"bootm"
#endif /* CONFIG_BOOT_ROOT_INITRD */
#if CONFIG_BOOT_ROOT_NFS
#ifdef CONFIG_BOOT_ROOT_NFS
#define CONFIG_BOOTCOMMAND \
"version;" \
"echo;" \

4
include/configs/sbc8260.h
View File

@ -392,7 +392,7 @@
#define CONFIG_BOOT_ROOT_INITRD 0 /* Use ram disk for the root file system */
#define CONFIG_BOOT_ROOT_NFS 1 /* Use a NFS mounted root file system */
#if CONFIG_BOOT_ROOT_INITRD
#ifdef CONFIG_BOOT_ROOT_INITRD
#define CONFIG_BOOTCOMMAND \
"version;" \
"echo;" \
@ -402,7 +402,7 @@
"bootm"
#endif /* CONFIG_BOOT_ROOT_INITRD */
#if CONFIG_BOOT_ROOT_NFS
#ifdef CONFIG_BOOT_ROOT_NFS
#define CONFIG_BOOTCOMMAND \
"version;" \
"echo;" \

13
include/configs/versatile.h
View File

@ -72,6 +72,7 @@
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
@ -94,7 +95,7 @@
#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_MEMORY)
//#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY)
/*#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) */
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
@ -102,15 +103,15 @@
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0"
//#define CONFIG_BOOTCOMMAND "bootp ; bootm"
#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0"
/*#define CONFIG_BOOTCOMMAND "bootp ; bootm" */
/*
* Static configuration when assigning fixed address
*/
//#define CONFIG_NETMASK 255.255.255.0 /* talk on MY local net */
//#define CONFIG_IPADDR xx.xx.xx.xx /* static IP I currently own */
//#define CONFIG_SERVERIP xx.xx.xx.xx /* current IP of my dev pc */
/*#define CONFIG_NETMASK 255.255.255.0 /--* talk on MY local net */
/*#define CONFIG_IPADDR xx.xx.xx.xx /--* static IP I currently own */
/*#define CONFIG_SERVERIP xx.xx.xx.xx /--* current IP of my dev pc */
#define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */

2
include/ide.h
View File

@ -38,7 +38,7 @@
#endif /* CONFIG_IDE_LED */
#if CFG_64BIT_LBA
#ifdef CFG_64BIT_LBA
typedef uint64_t lbaint_t;
#else
typedef ulong lbaint_t;

51
include/part.h
View File

@ -1,5 +1,5 @@
/*
* (C) Copyright 2000, 2001
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@ -25,22 +25,25 @@
typedef struct block_dev_desc {
int if_type; /* type of the interface */
int dev; /* device number */
unsigned char part_type; /* partition type */
unsigned char target; /* target SCSI ID */
unsigned char lun; /* target LUN */
unsigned char type; /* device type */
unsigned long lba; /* number of blocks */
unsigned long blksz; /* block size */
unsigned char vendor[40]; /* IDE model, SCSI Vendor */
unsigned char product[20];/* IDE Serial no, SCSI product */
unsigned char revision[8];/* firmware revision */
unsigned char removable; /* removable device */
unsigned long (*block_read)(int dev,
unsigned long start,
unsigned long blkcnt,
unsigned long *buffer);
int if_type; /* type of the interface */
int dev; /* device number */
unsigned char part_type; /* partition type */
unsigned char target; /* target SCSI ID */
unsigned char lun; /* target LUN */
unsigned char type; /* device type */
unsigned char removable; /* removable device */
#ifdef CONFIG_LBA48
unsigned char lba48; /* device can use 48bit addr (ATA/ATAPI v7) */
#endif
unsigned long lba; /* number of blocks */
unsigned long blksz; /* block size */
unsigned char vendor[40]; /* IDE model, SCSI Vendor */
unsigned char product[20]; /* IDE Serial no, SCSI product */
unsigned char revision[8]; /* firmware revision */
unsigned long (*block_read)(int dev,
unsigned long start,
unsigned long blkcnt,
unsigned long *buffer);
}block_dev_desc_t;
/* Interface types: */
@ -53,11 +56,11 @@ typedef struct block_dev_desc {
#define IF_TYPE_MMC 6
/* Part types */
#define PART_TYPE_UNKNOWN 0x00
#define PART_TYPE_UNKNOWN 0x00
#define PART_TYPE_MAC 0x01
#define PART_TYPE_DOS 0x02
#define PART_TYPE_ISO 0x03
#define PART_TYPE_AMIGA 0x04
#define PART_TYPE_AMIGA 0x04
/*
* Type string for U-Boot bootable partitions
@ -68,11 +71,11 @@ typedef struct block_dev_desc {
/* device types */
#define DEV_TYPE_UNKNOWN 0xff /* not connected */
#define DEV_TYPE_HARDDISK 0x00 /* harddisk */
#define DEV_TYPE_TAPE 0x01 /* Tape */
#define DEV_TYPE_CDROM 0x05 /* CD-ROM */
#define DEV_TYPE_OPDISK 0x07 /* optical disk */
#define DEV_TYPE_TAPE 0x01 /* Tape */
#define DEV_TYPE_CDROM 0x05 /* CD-ROM */
#define DEV_TYPE_OPDISK 0x07 /* optical disk */
typedef struct disk_partition {
typedef struct disk_partition {
ulong start; /* # of first block in partition */
ulong size; /* number of blocks in partition */
ulong blksz; /* block size in bytes */

8
lib_generic/vsprintf.c
View File

@ -55,7 +55,7 @@ long simple_strtol(const char *cp,char **endp,unsigned int base)
return simple_strtoul(cp,endp,base);
}
#if CFG_64BIT_STRTOUL
#ifdef CFG_64BIT_STRTOUL
unsigned long long simple_strtoull (const char *cp, char **endp, unsigned int base)
{
unsigned long long result = 0, value;
@ -112,7 +112,7 @@ static int skip_atoi(const char **s)
__res; \
})
#if CFG_64BIT_VSPRINTF
#ifdef CFG_64BIT_VSPRINTF
static char * number(char * str, long long num, int base, int size, int precision ,int type)
#else
static char * number(char * str, long num, int base, int size, int precision ,int type)
@ -188,7 +188,7 @@ int sprintf(char * buf, const char *fmt, ...);
int vsprintf(char *buf, const char *fmt, va_list args)
{
int len;
#if CFG_64BIT_VSPRINTF
#ifdef CFG_64BIT_VSPRINTF
unsigned long long num;
#else
unsigned long num;
@ -337,7 +337,7 @@ int vsprintf(char *buf, const char *fmt, va_list args)
--fmt;
continue;
}
#if CFG_64BIT_VSPRINTF
#ifdef CFG_64BIT_VSPRINTF
if (qualifier == 'q') /* "quad" for 64 bit variables */
num = va_arg(args, unsigned long long);
else

2
lib_i386/board.c
View File

@ -343,7 +343,7 @@ void start_i386boot (void)
/* Must happen after interrupts are initialized since
* an irq handler gets installed
*/
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
serial_buffered_init();
#endif

2
lib_m68k/board.c
View File

@ -577,7 +577,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
*/
timer_init();
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
serial_buffered_init();
#endif

2
lib_ppc/board.c
View File

@ -874,7 +874,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
/* Must happen after interrupts are initialized since
* an irq handler gets installed
*/
#if CONFIG_SERIAL_SOFTWARE_FIFO
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
serial_buffered_init();
#endif