phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

nios2: Fix outx/writex parameter order in io.h 

The outx/writex macros were using writex(addr, val) rather than
   the standard writex(val, addr), resulting in incompatibilty with
   architecture independent components. This change set uses standard
   parameter order.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>
This commit is contained in:
Scott McNutt 2010-03-21 21:24:43 -04:00
parent 64da04d24e
commit 3ea0037f23
10 changed files with 53 additions and 53 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
board/altera/common/AMDLV065D.c
View File

@ -122,12 +122,12 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr2 = (unsigned char *) info->start[sect];
writeb (addr, 0xaa);
writeb (addr, 0x55);
writeb (addr, 0x80);
writeb (addr, 0xaa);
writeb (addr, 0x55);
writeb (addr2, 0x30);
writeb (0xaa, addr);
writeb (0x55, addr);
writeb (0x80, addr);
writeb (0xaa, addr);
writeb (0x55, addr);
writeb (0x30, addr2);
/* Now just wait for 0xff & provide some user
* feedback while we wait.
*/
@ -169,9 +169,9 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
return (2);
}
writeb (cmd, 0xaa);
writeb (cmd, 0x55);
writeb (cmd, 0xa0);
writeb (0xaa, cmd);
writeb (0x55, cmd);
writeb (0xa0, cmd);
writeb (dst, b);
/* Verify write */

6
board/altera/common/epled.c
View File

@ -39,7 +39,7 @@ void __led_init (led_id_t mask, int state)
val &= ~mask;
else
val |= mask;
writel (&pio->data, val);
writel (val, &pio->data);
}
void __led_set (led_id_t mask, int state)
@ -50,7 +50,7 @@ void __led_set (led_id_t mask, int state)
val &= ~mask;
else
val |= mask;
writel (&pio->data, val);
writel (val, &pio->data);
}
void __led_toggle (led_id_t mask)
@ -58,5 +58,5 @@ void __led_toggle (led_id_t mask)
nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
val ^= mask;
writel (&pio->data, val);
writel (val, &pio->data);
}

18
board/psyent/common/AMDLV065D.c
View File

@ -122,12 +122,12 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr2 = (unsigned char *) info->start[sect];
writeb (addr, 0xaa);
writeb (addr, 0x55);
writeb (addr, 0x80);
writeb (addr, 0xaa);
writeb (addr, 0x55);
writeb (addr2, 0x30);
writeb (0xaa, addr);
writeb (0x55, addr);
writeb (0x80, addr);
writeb (0xaa, addr);
writeb (0x55, addr);
writeb (0x30, addr2);
/* Now just wait for 0xff & provide some user
* feedback while we wait.
*/
@ -169,9 +169,9 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
return (2);
}
writeb (cmd, 0xaa);
writeb (cmd, 0x55);
writeb (cmd, 0xa0);
writeb (0xaa, cmd);
writeb (0x55, cmd);
writeb (0xa0, cmd);
writeb (dst, b);
/* Verify write */

6
board/psyent/pk1c20/led.c
View File

@ -39,7 +39,7 @@ void __led_init (led_id_t mask, int state)
val &= ~mask;
else
val |= mask;
writel (&pio->data, val);
writel (val, &pio->data);
}
void __led_set (led_id_t mask, int state)
@ -50,7 +50,7 @@ void __led_set (led_id_t mask, int state)
val &= ~mask;
else
val |= mask;
writel (&pio->data, val);
writel (val, &pio->data);
}
void __led_toggle (led_id_t mask)
@ -58,5 +58,5 @@ void __led_toggle (led_id_t mask)
nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
val ^= mask;
writel (&pio->data, val);
writel (val, &pio->data);
}

6
cpu/nios2/epcs.c
View File

@ -85,7 +85,7 @@ static int epcs_cs (int assert)
if (assert) {
tmp = readl (&epcs->control);
writel (&epcs->control, tmp | NIOS_SPI_SSO);
writel (tmp | NIOS_SPI_SSO, &epcs->control);
} else {
/* Let all bits shift out */
start = get_timer (0);
@ -93,7 +93,7 @@ static int epcs_cs (int assert)
if (get_timer (start) > EPCS_TIMEOUT)
return (-1);
tmp = readl (&epcs->control);
writel (&epcs->control, tmp & ~NIOS_SPI_SSO);
writel (tmp & ~NIOS_SPI_SSO, &epcs->control);
}
return (0);
}
@ -106,7 +106,7 @@ static int epcs_tx (unsigned char c)
while ((readl (&epcs->status) & NIOS_SPI_TRDY) == 0)
if (get_timer (start) > EPCS_TIMEOUT)
return (-1);
writel (&epcs->txdata, c);
writel (c, &epcs->txdata);
return (0);
}

16
cpu/nios2/interrupts.c
View File

@ -81,7 +81,7 @@ void tmr_isr (void *arg)
/* Interrupt is cleared by writing anything to the
* status register.
*/
writel (&tmr->status, 0);
writel (0, &tmr->status);
timestamp += CONFIG_SYS_NIOS_TMRMS;
#ifdef CONFIG_STATUS_LED
status_led_tick(timestamp);
@ -92,16 +92,16 @@ static void tmr_init (void)
{
nios_timer_t *tmr =(nios_timer_t *)CONFIG_SYS_NIOS_TMRBASE;
writel (&tmr->status, 0);
writel (&tmr->control, 0);
writel (&tmr->control, NIOS_TIMER_STOP);
writel (0, &tmr->status);
writel (0, &tmr->control);
writel (NIOS_TIMER_STOP, &tmr->control);
#if defined(CONFIG_SYS_NIOS_TMRCNT)
writel (&tmr->periodl, CONFIG_SYS_NIOS_TMRCNT & 0xffff);
writel (&tmr->periodh, (CONFIG_SYS_NIOS_TMRCNT >> 16) & 0xffff);
writel (CONFIG_SYS_NIOS_TMRCNT & 0xffff, &tmr->periodl);
writel ((CONFIG_SYS_NIOS_TMRCNT >> 16) & 0xffff, &tmr->periodh);
#endif
writel (&tmr->control, NIOS_TIMER_ITO | NIOS_TIMER_CONT |
NIOS_TIMER_START );
writel (NIOS_TIMER_ITO | NIOS_TIMER_CONT | NIOS_TIMER_START,
&tmr->control);
irq_install_handler (CONFIG_SYS_NIOS_TMRIRQ, tmr_isr, (void *)tmr);
}

2
drivers/serial/altera_jtag_uart.c
View File

@ -40,7 +40,7 @@ void serial_putc (char c)
{
while (NIOS_JTAG_WSPACE ( readl (&jtag->control)) == 0)
WATCHDOG_RESET ();
writel (&jtag->data, (unsigned char)c);
writel ((unsigned char)c, &jtag->data);
}
void serial_puts (const char *s)

4
drivers/serial/altera_uart.c
View File

@ -50,7 +50,7 @@ void serial_setbrg (void)
unsigned div;
div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
writel (&uart->divisor,div);
writel (div, &uart->divisor);
return;
}
@ -71,7 +71,7 @@ void serial_putc (char c)
serial_putc ('\r');
while ((readl (&uart->status) & NIOS_UART_TRDY) == 0)
WATCHDOG_RESET ();
writel (&uart->txdata,(unsigned char)c);
writel ((unsigned char)c, &uart->txdata);
}
void serial_puts (const char *s)

12
drivers/serial/opencores_yanu.c
View File

@ -61,7 +61,7 @@ void serial_setbrg (void)
((unsigned)CONFIG_SYS_CLK_FREQ >> k);
baud = best_m + best_n * YANU_BAUDE;
writel(&uart->baud, baud);
writel(baud, &uart->baud);
return;
}
@ -92,7 +92,7 @@ void serial_setbrg (void)
((unsigned)CONFIG_SYS_CLK_FREQ >> k);
baud = best_m + best_n * YANU_BAUDE;
writel(&uart->baud, baud);
writel(baud, &uart->baud);
return;
}
@ -113,7 +113,7 @@ int serial_init (void)
YANU_ACTION_RPE |
YANU_ACTION_RFE | YANU_ACTION_RFIFO_CLEAR | YANU_ACTION_TFIFO_CLEAR;
writel(&uart->action, action);
writel(action, &uart->action);
/* control register cleanup */
/* no interrupts enabled */
@ -127,7 +127,7 @@ int serial_init (void)
control |= YANU_CONTROL_RDYDLY * YANU_RXFIFO_DLY;
control |= YANU_CONTROL_TXTHR * YANU_TXFIFO_THR;
writel(&uart->control, control);
writel(control, &uart->control);
/* to set baud rate */
serial_setbrg();
@ -156,7 +156,7 @@ void serial_putc (char c)
WATCHDOG_RESET ();
}
writel(&uart->data, (unsigned char)c);
writel((unsigned char)c, &uart->data);
}
void serial_puts (const char *s)
@ -182,7 +182,7 @@ int serial_getc (void)
WATCHDOG_RESET ();
/* first we pull the char */
writel(&uart->action, YANU_ACTION_RFIFO_PULL);
writel(YANU_ACTION_RFIFO_PULL, &uart->action);
return(readl(&uart->data) & YANU_DATA_CHAR_MASK);
}

18
include/asm-nios2/io.h
View File

@ -80,19 +80,19 @@ extern unsigned inl (unsigned port);
({unsigned long val;\
asm volatile( "ldwio %0, 0(%1)" :"=r"(val) : "r" (addr)); val;})
#define writeb(addr,val)\
asm volatile ("stbio %1, 0(%0)" : : "r" (addr), "r" (val))
#define writew(addr,val)\
asm volatile ("sthio %1, 0(%0)" : : "r" (addr), "r" (val))
#define writel(addr,val)\
asm volatile ("stwio %1, 0(%0)" : : "r" (addr), "r" (val))
#define writeb(val,addr)\
asm volatile ("stbio %0, 0(%1)" : : "r" (val), "r" (addr))
#define writew(val,addr)\
asm volatile ("sthio %0, 0(%1)" : : "r" (val), "r" (addr))
#define writel(val,addr)\
asm volatile ("stwio %0, 0(%1)" : : "r" (val), "r" (addr))
#define inb(addr) readb(addr)
#define inw(addr) readw(addr)
#define inl(addr) readl(addr)
#define outb(addr,val) writeb(addr,val)
#define outw(addr,val) writew(addr,val)
#define outl(addr,val) writel(addr,val)
#define outb(val, addr) writeb(val,addr)
#define outw(val, addr) writew(val,addr)
#define outl(val, addr) writel(val,addr)
static inline void insb (unsigned long port, void *dst, unsigned long count)
{