phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Merge ../u-boot

This commit is contained in:
Michal Simek 2007-09-15 00:01:53 +02:00
parent d45963854e 38ad82da0c
commit 329ff3c938
7 changed files with 25 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Makefile
View File

@ -22,9 +22,9 @@
#
VERSION = 1
PATCHLEVEL = 2
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION =
EXTRAVERSION = -rc1
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h

9
board/stxssa/stxssa.c
View File

@ -378,9 +378,12 @@ static struct pci_config_table pci_stxgp3_config_table[] = {
#endif
static struct pci_controller hose = {
static struct pci_controller hose[] = {
#ifndef CONFIG_PCI_PNP
config_table: pci_stxgp3_config_table,
{ config_table: pci_stxgp3_config_table,},
#ifdef CONFIG_MPC85XX_PCI2
{},
#endif
#endif
};
@ -393,6 +396,6 @@ pci_init_board(void)
#ifdef CONFIG_PCI
extern void pci_mpc85xx_init(struct pci_controller *hose);
pci_mpc85xx_init(&hose);
pci_mpc85xx_init(hose);
#endif /* CONFIG_PCI */
}

8
cpu/mpc512x/fec.c
View File

@ -32,7 +32,7 @@ int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * re
int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data);
int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis);
static uchar rx_buff[FEC_MAX_PKT_SIZE];
static uchar rx_buff[FEC_BUFFER_SIZE];
static int rx_buff_idx = 0;
/********************************************************************/
@ -237,8 +237,8 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis)
/* Set Opcode/Pause Duration Register */
fec->eth->op_pause = 0x00010020;
/* Frame length=1518; MII mode */
fec->eth->r_cntrl = 0x05ee0024;
/* Frame length=1522; MII mode */
fec->eth->r_cntrl = (FEC_MAX_FRAME_LEN << 16) | 0x24;
/* Half-duplex, heartbeat disabled */
fec->eth->x_cntrl = 0x00000000;
@ -248,7 +248,7 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis)
/* Setup recv fifo start and buff size */
fec->eth->r_fstart = 0x500;
fec->eth->r_buff_size = 0x5e0;
fec->eth->r_buff_size = FEC_BUFFER_SIZE;
/* Setup BD base addresses */
fec->eth->r_des_start = (uint32)fec->bdBase->rbd;

7
cpu/mpc512x/fec.h
View File

@ -164,10 +164,13 @@ typedef enum {
#define FEC_RBD_NUM 32 /* The user can adjust this value */
/* packet size limit */
#define FEC_MAX_PKT_SIZE 1536
#define FEC_MAX_FRAME_LEN 1522 /* recommended default value */
/* Buffer size must be evenly divisible by 16 */
#define FEC_BUFFER_SIZE ((FEC_MAX_FRAME_LEN + 0x10) & (~0xf))
typedef struct {
uint8 frame[FEC_MAX_PKT_SIZE];
uint8 frame[FEC_BUFFER_SIZE];
} mpc512x_frame;
typedef struct {

2
include/configs/stxssa.h
View File

@ -230,7 +230,7 @@
#define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */
#if defined(CONFIG_PCI) /* PCI Ethernet card */
#define CONFIG_MPC85XX_PCI2 1
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */

1
include/image.h
View File

@ -77,6 +77,7 @@
#define IH_CPU_NIOS2 15 /* Nios-II */
#define IH_CPU_BLACKFIN 16 /* Blackfin */
#define IH_CPU_AVR32 17 /* AVR32 */
#define IH_CPU_ST200 18 /* STMicroelectronics ST200 */
/*
* Image Types

6
nand_spl/board/amcc/bamboo/Makefile
View File

@ -84,6 +84,12 @@ $(obj)nand_ecc.c:
@rm -f $(obj)nand_ecc.c
ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c
ifneq ($(OBJTREE), $(SRCTREE))
$(obj)sdram.c:
@rm -f $(obj)sdram.c
ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/sdram.c $(obj)sdram.c
endif
#########################################################################
$(obj)%.o: $(obj)%.S