Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
This commit is contained in:
Wolfgang Denk
commit
1d28d48e3d
|
|
@ -30,7 +30,7 @@
|
|||
struct law_entry law_table[] = {
|
||||
SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
|
||||
SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
|
||||
SET_LAW(CFG_LBC_CACHE_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
|
||||
SET_LAW(CFG_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC),
|
||||
SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1),
|
||||
SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
|
||||
SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
|
||||
|
|
|
|||
|
|
@ -49,7 +49,10 @@ int checkboard (void)
|
|||
if ((uint)&gur->porpllsr != 0xe00e0000) {
|
||||
printf("immap size error %lx\n",(ulong)&gur->porpllsr);
|
||||
}
|
||||
printf ("Board: MPC8544DS\n");
|
||||
printf ("Board: MPC8544DS, System ID: 0x%02x, "
|
||||
"System Version: 0x%02x, FPGA Version: 0x%02x\n",
|
||||
in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
|
||||
in8(PIXIS_BASE + PIXIS_PVER));
|
||||
|
||||
lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */
|
||||
lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */
|
||||
|
|
|
|||
|
|
@ -79,21 +79,13 @@ struct fsl_e_tlb_entry tlb_table[] = {
|
|||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 4, BOOKE_PAGESZ_64M, 1),
|
||||
|
||||
#ifdef CFG_LBC_CACHE_BASE
|
||||
/*
|
||||
* TLB 5: 64M Cacheable, non-guarded
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, 0,
|
||||
0, 5, BOOKE_PAGESZ_64M, 1),
|
||||
#endif
|
||||
/*
|
||||
* TLB 6: 64M Non-cacheable, guarded
|
||||
* TLB 5: 64M Non-cacheable, guarded
|
||||
* 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF
|
||||
*/
|
||||
SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 6, BOOKE_PAGESZ_64M, 1),
|
||||
0, 5, BOOKE_PAGESZ_64M, 1),
|
||||
};
|
||||
|
||||
int num_tlb_entries = ARRAY_SIZE(tlb_table);
|
||||
|
|
|
|||
|
|
@ -71,6 +71,7 @@ SECTIONS
|
|||
lib_generic/crc32.o (.text)
|
||||
lib_ppc/extable.o (.text)
|
||||
lib_generic/zlib.o (.text)
|
||||
drivers/bios_emulator/atibios.o (.text)
|
||||
*(.text)
|
||||
*(.fixup)
|
||||
*(.got1)
|
||||
|
|
|
|||
|
|
@ -33,6 +33,8 @@
|
|||
#include <ioports.h>
|
||||
#include <spd_sdram.h>
|
||||
#include <miiphy.h>
|
||||
#include <libfdt.h>
|
||||
#include <fdt_support.h>
|
||||
|
||||
long int fixed_sdram (void);
|
||||
|
||||
|
|
@ -421,7 +423,11 @@ long int fixed_sdram (void)
|
|||
#ifndef CFG_RAMBOOT
|
||||
volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
|
||||
|
||||
#if (CFG_SDRAM_SIZE == 512)
|
||||
ddr->cs0_bnds = 0x0000000f;
|
||||
#else
|
||||
ddr->cs0_bnds = 0x00000007;
|
||||
#endif
|
||||
ddr->cs1_bnds = 0x0010001f;
|
||||
ddr->cs2_bnds = 0x00000000;
|
||||
ddr->cs3_bnds = 0x00000000;
|
||||
|
|
@ -452,3 +458,29 @@ long int fixed_sdram (void)
|
|||
return CFG_SDRAM_SIZE * 1024 * 1024;
|
||||
}
|
||||
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
||||
|
||||
|
||||
#if defined(CONFIG_OF_BOARD_SETUP)
|
||||
void
|
||||
ft_board_setup(void *blob, bd_t *bd)
|
||||
{
|
||||
int node, tmp[2];
|
||||
#ifdef CONFIG_PCI
|
||||
const char *path;
|
||||
#endif
|
||||
|
||||
ft_cpu_setup(blob, bd);
|
||||
|
||||
node = fdt_path_offset(blob, "/aliases");
|
||||
tmp[0] = 0;
|
||||
if (node >= 0) {
|
||||
#ifdef CONFIG_PCI
|
||||
path = fdt_getprop(blob, node, "pci0", NULL);
|
||||
if (path) {
|
||||
tmp[1] = hose.last_busno - hose.first_busno;
|
||||
do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -442,3 +442,90 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
|
|||
prop, compat, fdt_strerror(err));
|
||||
}
|
||||
#endif /* CONFIG_HAS_FSL_DR_USB */
|
||||
|
||||
#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx)
|
||||
/*
|
||||
* update crypto node properties to a specified revision of the SEC
|
||||
* called with sec_rev == 0 if not on an mpc8xxxE processor
|
||||
*/
|
||||
void fdt_fixup_crypto_node(void *blob, int sec_rev)
|
||||
{
|
||||
const struct sec_rev_prop {
|
||||
u32 sec_rev;
|
||||
u32 num_channels;
|
||||
u32 channel_fifo_len;
|
||||
u32 exec_units_mask;
|
||||
u32 descriptor_types_mask;
|
||||
} sec_rev_prop_list [] = {
|
||||
{ 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */
|
||||
{ 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */
|
||||
{ 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */
|
||||
{ 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */
|
||||
{ 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */
|
||||
{ 0x0303, 4, 24, 0x97c, 0x03ab0abf }, /* SEC 3.3 */
|
||||
};
|
||||
char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
|
||||
sizeof("fsl,secX.Y")];
|
||||
int crypto_node, sec_idx, err;
|
||||
char *p;
|
||||
u32 val;
|
||||
|
||||
/* locate crypto node based on lowest common compatible */
|
||||
crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0");
|
||||
if (crypto_node == -FDT_ERR_NOTFOUND)
|
||||
return;
|
||||
|
||||
/* delete it if not on an E-processor */
|
||||
if (crypto_node > 0 && !sec_rev) {
|
||||
fdt_del_node(blob, crypto_node);
|
||||
return;
|
||||
}
|
||||
|
||||
/* else we got called for possible uprev */
|
||||
for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++)
|
||||
if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev)
|
||||
break;
|
||||
|
||||
if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) {
|
||||
puts("warning: unknown SEC revision number\n");
|
||||
return;
|
||||
}
|
||||
|
||||
val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels);
|
||||
err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4);
|
||||
if (err < 0)
|
||||
printf("WARNING: could not set crypto property: %s\n",
|
||||
fdt_strerror(err));
|
||||
|
||||
val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask);
|
||||
err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4);
|
||||
if (err < 0)
|
||||
printf("WARNING: could not set crypto property: %s\n",
|
||||
fdt_strerror(err));
|
||||
|
||||
val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask);
|
||||
err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4);
|
||||
if (err < 0)
|
||||
printf("WARNING: could not set crypto property: %s\n",
|
||||
fdt_strerror(err));
|
||||
|
||||
val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len);
|
||||
err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4);
|
||||
if (err < 0)
|
||||
printf("WARNING: could not set crypto property: %s\n",
|
||||
fdt_strerror(err));
|
||||
|
||||
val = 0;
|
||||
while (sec_idx >= 0) {
|
||||
p = compat_strlist + val;
|
||||
val += sprintf(p, "fsl,sec%d.%d",
|
||||
(sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8,
|
||||
sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1;
|
||||
sec_idx--;
|
||||
}
|
||||
err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val);
|
||||
if (err < 0)
|
||||
printf("WARNING: could not set crypto property: %s\n",
|
||||
fdt_strerror(err));
|
||||
}
|
||||
#endif /* defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) */
|
||||
|
|
|
|||
|
|
@ -26,6 +26,7 @@
|
|||
#include <common.h>
|
||||
#include <libfdt.h>
|
||||
#include <fdt_support.h>
|
||||
#include <asm/processor.h>
|
||||
|
||||
extern void ft_qe_setup(void *blob);
|
||||
|
||||
|
|
@ -33,6 +34,23 @@ DECLARE_GLOBAL_DATA_PTR;
|
|||
|
||||
void ft_cpu_setup(void *blob, bd_t *bd)
|
||||
{
|
||||
immap_t *immr = (immap_t *)CFG_IMMR;
|
||||
int spridr = immr->sysconf.spridr;
|
||||
|
||||
/*
|
||||
* delete crypto node if not on an E-processor
|
||||
* initial revisions of the MPC834xE/6xE have the original SEC 2.0.
|
||||
* EA revisions got the SEC uprevved to 2.4 but since the default device
|
||||
* tree contains SEC 2.0 properties we uprev them here.
|
||||
*/
|
||||
if (!IS_E_PROCESSOR(spridr))
|
||||
fdt_fixup_crypto_node(blob, 0);
|
||||
else if (IS_E_PROCESSOR(spridr) &&
|
||||
(SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
|
||||
SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
|
||||
REVID_MAJOR(spridr) >= 2)
|
||||
fdt_fixup_crypto_node(blob, 0x0204);
|
||||
|
||||
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
|
||||
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
|
||||
fdt_fixup_ethernet(blob, bd);
|
||||
|
|
@ -60,7 +78,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
|
|||
|
||||
#ifdef CFG_NS16550
|
||||
do_fixup_by_compat_u32(blob, "ns16550",
|
||||
"clock-frequency", bd->bi_busfreq, 1);
|
||||
"clock-frequency", CFG_NS16550_CLK, 1);
|
||||
#endif
|
||||
|
||||
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
|
||||
|
|
|
|||
|
|
@ -97,7 +97,7 @@ int checkcpu (void)
|
|||
if (cpu) {
|
||||
puts(cpu->name);
|
||||
|
||||
if (svr & 0x80000)
|
||||
if (IS_E_PROCESSOR(svr))
|
||||
puts("E");
|
||||
} else {
|
||||
puts("Unknown");
|
||||
|
|
|
|||
|
|
@ -261,37 +261,50 @@ int cpu_init_r(void)
|
|||
volatile uint cache_ctl;
|
||||
uint svr, ver;
|
||||
uint l2srbar;
|
||||
u32 l2siz_field;
|
||||
|
||||
svr = get_svr();
|
||||
ver = SVR_SOC_VER(svr);
|
||||
|
||||
asm("msync;isync");
|
||||
cache_ctl = l2cache->l2ctl;
|
||||
l2siz_field = (cache_ctl >> 28) & 0x3;
|
||||
|
||||
switch (cache_ctl & 0x30000000) {
|
||||
case 0x20000000:
|
||||
if (ver == SVR_8548 || ver == SVR_8548_E ||
|
||||
ver == SVR_8544 || ver == SVR_8568_E) {
|
||||
puts ("512 KB ");
|
||||
/* set L2E=1, L2I=1, & L2SRAM=0 */
|
||||
cache_ctl = 0xc0000000;
|
||||
switch (l2siz_field) {
|
||||
case 0x0:
|
||||
printf(" unknown size (0x%08x)\n", cache_ctl);
|
||||
return -1;
|
||||
break;
|
||||
case 0x1:
|
||||
if (ver == SVR_8540 || ver == SVR_8560 ||
|
||||
ver == SVR_8541 || ver == SVR_8541_E ||
|
||||
ver == SVR_8555 || ver == SVR_8555_E) {
|
||||
puts("128 KB ");
|
||||
/* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
|
||||
cache_ctl = 0xc4000000;
|
||||
} else {
|
||||
puts("256 KB ");
|
||||
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
|
||||
cache_ctl = 0xc8000000;
|
||||
}
|
||||
break;
|
||||
case 0x10000000:
|
||||
puts("256 KB ");
|
||||
if (ver == SVR_8544 || ver == SVR_8544_E) {
|
||||
cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
|
||||
}
|
||||
break;
|
||||
case 0x30000000:
|
||||
case 0x00000000:
|
||||
default:
|
||||
printf(" unknown size (0x%08x)\n", cache_ctl);
|
||||
return -1;
|
||||
case 0x2:
|
||||
if (ver == SVR_8540 || ver == SVR_8560 ||
|
||||
ver == SVR_8541 || ver == SVR_8541_E ||
|
||||
ver == SVR_8555 || ver == SVR_8555_E) {
|
||||
puts("256 KB ");
|
||||
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
|
||||
cache_ctl = 0xc8000000;
|
||||
} else {
|
||||
puts ("512 KB ");
|
||||
/* set L2E=1, L2I=1, & L2SRAM=0 */
|
||||
cache_ctl = 0xc0000000;
|
||||
}
|
||||
break;
|
||||
case 0x3:
|
||||
puts("1024 KB ");
|
||||
/* set L2E=1, L2I=1, & L2SRAM=0 */
|
||||
cache_ctl = 0xc0000000;
|
||||
break;
|
||||
}
|
||||
|
||||
if (l2cache->l2ctl & 0x80000000) {
|
||||
|
|
|
|||
|
|
@ -29,6 +29,7 @@
|
|||
#include <asm/processor.h>
|
||||
|
||||
extern void ft_qe_setup(void *blob);
|
||||
|
||||
#ifdef CONFIG_MP
|
||||
#include "mp.h"
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
|
@ -205,6 +206,10 @@ static inline void ft_fixup_cache(void *blob)
|
|||
|
||||
void ft_cpu_setup(void *blob, bd_t *bd)
|
||||
{
|
||||
/* delete crypto node if not on an E-processor */
|
||||
if (!IS_E_PROCESSOR(get_svr()))
|
||||
fdt_fixup_crypto_node(blob, 0);
|
||||
|
||||
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
|
||||
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
|
||||
fdt_fixup_ethernet(blob, bd);
|
||||
|
|
@ -224,7 +229,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
|
|||
|
||||
#ifdef CFG_NS16550
|
||||
do_fixup_by_compat_u32(blob, "ns16550",
|
||||
"clock-frequency", bd->bi_busfreq, 1);
|
||||
"clock-frequency", CFG_NS16550_CLK, 1);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_CPM2
|
||||
|
|
|
|||
|
|
@ -188,11 +188,12 @@ _start_e500:
|
|||
lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h
|
||||
ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l
|
||||
|
||||
lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
|
||||
ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
|
||||
/* Align the mapping to 16MB */
|
||||
lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@h
|
||||
ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@l
|
||||
|
||||
lis r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
|
||||
ori r9,r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
|
||||
lis r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
|
||||
ori r9,r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
|
||||
|
||||
mtspr MAS0,r6
|
||||
mtspr MAS1,r7
|
||||
|
|
|
|||
|
|
@ -30,6 +30,6 @@ void ft_cpu_setup(void *blob, bd_t *bd)
|
|||
|
||||
#ifdef CFG_NS16550
|
||||
do_fixup_by_compat_u32(blob, "ns16550",
|
||||
"clock-frequency", bd->bi_busfreq, 1);
|
||||
"clock-frequency", CFG_NS16550_CLK, 1);
|
||||
#endif
|
||||
}
|
||||
|
|
|
|||
|
|
@ -426,6 +426,7 @@
|
|||
/* e500 definitions */
|
||||
#define SPRN_L1CFG0 0x203 /* L1 Cache Configuration Register 0 */
|
||||
#define SPRN_L1CFG1 0x204 /* L1 Cache Configuration Register 1 */
|
||||
#define SPRN_L2CFG0 0x207 /* L2 Cache Configuration Register 0 */
|
||||
#define SPRN_L1CSR0 0x3f2 /* L1 Data Cache Control and Status Register 0 */
|
||||
#define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */
|
||||
#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
|
||||
|
|
@ -434,6 +435,21 @@
|
|||
#define L1CSR1_CPE 0x00010000 /* Instruction Cache Parity Enable */
|
||||
#define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */
|
||||
#define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */
|
||||
#define SPRN_L1CSR2 0x25e /* L1 Data Cache Control and Status Register 2 */
|
||||
#define SPRN_L2CSR0 0x3f9 /* L2 Data Cache Control and Status Register 0 */
|
||||
#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
|
||||
#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */
|
||||
#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */
|
||||
#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */
|
||||
#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */
|
||||
#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */
|
||||
#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */
|
||||
#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */
|
||||
#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */
|
||||
#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */
|
||||
#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
|
||||
#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */
|
||||
#define SPRN_L2CSR1 0x3fa /* L2 Data Cache Control and Status Register 1 */
|
||||
|
||||
#define SPRN_MMUCSR0 0x3f4 /* MMU control and status register 0 */
|
||||
#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
|
||||
|
|
@ -624,8 +640,12 @@
|
|||
#define MCSRR1 SPRN_MCSRR1
|
||||
#define L1CSR0 SPRN_L1CSR0
|
||||
#define L1CSR1 SPRN_L1CSR1
|
||||
#define L1CSR2 SPRN_L1CSR2
|
||||
#define L1CFG0 SPRN_L1CFG0
|
||||
#define L1CFG1 SPRN_L1CFG1
|
||||
#define L2CFG0 SPRN_L2CFG0
|
||||
#define L2CSR0 SPRN_L2CSR0
|
||||
#define L2CSR1 SPRN_L2CSR1
|
||||
#define MCSR SPRN_MCSR
|
||||
#define MMUCSR0 SPRN_MMUCSR0
|
||||
#define BUCSR SPRN_BUCSR
|
||||
|
|
@ -885,6 +905,15 @@
|
|||
/* Some parts define SVR[0:23] as the SOC version */
|
||||
#define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFFFFF) /* SOC Version fields */
|
||||
|
||||
/* whether MPC8xxxE (i.e. has SEC) */
|
||||
#if defined(CONFIG_MPC85xx)
|
||||
#define IS_E_PROCESSOR(svr) (svr & 0x80000)
|
||||
#else
|
||||
#if defined(CONFIG_MPC83XX)
|
||||
#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000))
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/*
|
||||
* SVR_SOC_VER() Version Values
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -148,8 +148,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
|
|||
*/
|
||||
#define CFG_BOOT_BLOCK 0xfc000000 /* boot TLB */
|
||||
|
||||
#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */
|
||||
|
||||
#define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */
|
||||
|
||||
#define CFG_BR0_PRELIM 0xff801001
|
||||
|
|
@ -158,10 +156,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
|
|||
#define CFG_OR0_PRELIM 0xff806e65
|
||||
#define CFG_OR1_PRELIM 0xff806e65
|
||||
|
||||
#define CFG_FLASH_BANKS_LIST {0xfe800000,CFG_FLASH_BASE}
|
||||
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
|
||||
|
||||
#define CFG_FLASH_QUIET_TEST
|
||||
#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
|
||||
#undef CFG_FLASH_CHECKSUM
|
||||
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
||||
|
|
@ -203,30 +201,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
|
|||
|
||||
|
||||
/* define to use L1 as initial stack */
|
||||
#define CONFIG_L1_INIT_RAM 1
|
||||
#define CFG_INIT_L1_LOCK 1
|
||||
#define CFG_INIT_L1_ADDR 0xf4010000 /* Initial L1 address */
|
||||
#define CFG_INIT_L1_END 0x00004000 /* End of used area in RAM */
|
||||
#define CONFIG_L1_INIT_RAM
|
||||
#define CFG_INIT_RAM_LOCK 1
|
||||
#define CFG_INIT_RAM_ADDR 0xf4010000 /* Initial L1 address */
|
||||
#define CFG_INIT_RAM_END 0x00004000 /* End of used area in RAM */
|
||||
|
||||
/* define to use L2SRAM as initial stack */
|
||||
#undef CONFIG_L2_INIT_RAM
|
||||
#define CFG_INIT_L2_ADDR 0xf8fc0000
|
||||
#define CFG_INIT_L2_END 0x00040000 /* End of used area in RAM */
|
||||
|
||||
#ifdef CONFIG_L1_INIT_RAM
|
||||
#define CFG_INIT_RAM_ADDR CFG_INIT_L1_ADDR
|
||||
#define CFG_INIT_RAM_END CFG_INIT_L1_END
|
||||
#else
|
||||
#define CFG_INIT_RAM_ADDR CFG_INIT_L2_ADDR
|
||||
#define CFG_INIT_RAM_END CFG_INIT_L2_END
|
||||
#endif
|
||||
|
||||
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
||||
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
||||
#define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
|
||||
|
||||
/* Serial Port - controlled on board with jumper J8
|
||||
* open - index 2
|
||||
|
|
@ -314,6 +300,26 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
|
|||
|
||||
#if defined(CONFIG_PCI)
|
||||
|
||||
/*PCIE video card used*/
|
||||
#define VIDEO_IO_OFFSET CFG_PCIE2_IO_PHYS
|
||||
|
||||
/*PCI video card used*/
|
||||
/*#define VIDEO_IO_OFFSET CFG_PCI1_IO_PHYS*/
|
||||
|
||||
/* video */
|
||||
#define CONFIG_VIDEO
|
||||
|
||||
#if defined(CONFIG_VIDEO)
|
||||
#define CONFIG_BIOSEMU
|
||||
#define CONFIG_CFB_CONSOLE
|
||||
#define CONFIG_VIDEO_SW_CURSOR
|
||||
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
||||
#define CONFIG_ATI_RADEON_FB
|
||||
#define CONFIG_VIDEO_LOGO
|
||||
/*#define CONFIG_CONSOLE_CURSOR*/
|
||||
#define CFG_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
|
||||
#endif
|
||||
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
|
||||
|
|
@ -382,7 +388,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
|
|||
#if CFG_MONITOR_BASE > 0xfff80000
|
||||
#define CFG_ENV_ADDR 0xfff80000
|
||||
#else
|
||||
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
|
||||
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x70000)
|
||||
#endif
|
||||
#define CFG_ENV_SIZE 0x2000
|
||||
#define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */
|
||||
|
|
|
|||
|
|
@ -538,29 +538,29 @@
|
|||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyCPM\0" \
|
||||
"ramdiskaddr=1000000\0" \
|
||||
"ramdiskfile=your.ramdisk.u-boot\0" \
|
||||
"fdtaddr=400000\0" \
|
||||
"fdtfile=mpc8560ads.dtb\0"
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyCPM\0" \
|
||||
"ramdiskaddr=1000000\0" \
|
||||
"ramdiskfile=your.ramdisk.u-boot\0" \
|
||||
"fdtaddr=400000\0" \
|
||||
"fdtfile=mpc8560ads.dtb\0"
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr - $fdtaddr"
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr - $fdtaddr"
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
|
||||
|
||||
|
|
|
|||
|
|
@ -24,8 +24,8 @@
|
|||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/* mpc8560ads board configuration file */
|
||||
/* please refer to doc/README.mpc85xx for more info */
|
||||
/* sbc8560 board configuration file */
|
||||
/* please refer to doc/README.sbc8560 for more info */
|
||||
/* make sure you change the MAC address and other network params first,
|
||||
* search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
|
||||
*/
|
||||
|
|
@ -102,11 +102,11 @@
|
|||
#define CFG_SDRAM_SIZE 512 /* DDR is 512MB */
|
||||
#define SPD_EEPROM_ADDRESS 0x55 /* DDR DIMM */
|
||||
|
||||
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
||||
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
||||
|
||||
#if defined(CONFIG_MPC85xx_REV1)
|
||||
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
||||
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
||||
#endif
|
||||
|
||||
#undef CONFIG_CLOCKS_IN_MHZ
|
||||
|
|
@ -177,8 +177,8 @@
|
|||
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
||||
|
||||
/* Serial Port */
|
||||
#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
|
||||
#undef CONFIG_CONS_NONE /* define if console on something else */
|
||||
#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
|
||||
#undef CONFIG_CONS_NONE /* define if console on something else */
|
||||
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
||||
|
|
@ -200,6 +200,11 @@
|
|||
#define CFG_PROMPT_HUSH_PS2 "> "
|
||||
#endif
|
||||
|
||||
/* pass open firmware flat tree */
|
||||
#define CONFIG_OF_LIBFDT 1
|
||||
#define CONFIG_OF_BOARD_SETUP 1
|
||||
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
|
||||
|
||||
/*
|
||||
* I2C
|
||||
*/
|
||||
|
|
@ -215,16 +220,28 @@
|
|||
#define CFG_PCI_MEM_PHYS 0xC0000000
|
||||
#define CFG_PCI_MEM_SIZE 0x10000000
|
||||
|
||||
#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */
|
||||
#ifdef CONFIG_TSEC_ENET
|
||||
|
||||
# define CONFIG_NET_MULTI 1
|
||||
# define CONFIG_MII 1 /* MII PHY management */
|
||||
# define CONFIG_MPC85xx_TSEC1
|
||||
# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0"
|
||||
# define TSEC1_PHY_ADDR 25
|
||||
# define TSEC1_PHYIDX 0
|
||||
/* Options are: TSEC0 */
|
||||
# define CONFIG_ETHPRIME "TSEC0"
|
||||
#ifndef CONFIG_NET_MULTI
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_MII
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#endif
|
||||
#define CONFIG_TSEC1 1
|
||||
#define CONFIG_TSEC1_NAME "TSEC0"
|
||||
#define CONFIG_TSEC2 1
|
||||
#define CONFIG_TSEC2_NAME "TSEC1"
|
||||
#define TSEC1_PHY_ADDR 0x19
|
||||
#define TSEC2_PHY_ADDR 0x1a
|
||||
#define TSEC1_PHYIDX 0
|
||||
#define TSEC2_PHYIDX 0
|
||||
#define TSEC1_FLAGS TSEC_GIGABIT
|
||||
#define TSEC2_FLAGS TSEC_GIGABIT
|
||||
|
||||
/* Options are: TSEC[0-1] */
|
||||
#define CONFIG_ETHPRIME "TSEC0"
|
||||
|
||||
#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
|
||||
|
||||
|
|
@ -272,20 +289,20 @@
|
|||
* FLASH and environment organization
|
||||
*/
|
||||
|
||||
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
|
||||
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
|
||||
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
|
||||
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
|
||||
#if 0
|
||||
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
||||
#define CFG_FLASH_PROTECTION /* use hardware protection */
|
||||
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
||||
#define CFG_FLASH_PROTECTION /* use hardware protection */
|
||||
#endif
|
||||
#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
||||
#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
||||
|
||||
#undef CFG_FLASH_CHECKSUM
|
||||
#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
|
||||
#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
|
||||
|
||||
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
|
||||
#if 0
|
||||
/* XXX This doesn't work and I don't want to fix it */
|
||||
|
|
@ -315,9 +332,8 @@
|
|||
#define CFG_ENV_SIZE 0x2000
|
||||
#endif
|
||||
|
||||
#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
|
||||
#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600"
|
||||
/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/
|
||||
#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000"
|
||||
#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
|
|
@ -389,25 +405,57 @@
|
|||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||||
#endif
|
||||
|
||||
/*Note: change below for your network setting!!! */
|
||||
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
|
||||
# define CONFIG_ETHADDR 00:01:af:07:9b:8a
|
||||
# define CONFIG_HAS_ETH1
|
||||
# define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
|
||||
# define CONFIG_HAS_ETH2
|
||||
# define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
|
||||
#define CONFIG_HAS_ETH0
|
||||
#define CONFIG_HAS_ETH1
|
||||
#endif
|
||||
|
||||
#define CONFIG_SERVERIP 192.168.0.131
|
||||
#define CONFIG_IPADDR 192.168.0.105
|
||||
#define CONFIG_GATEWAYIP 0.0.0.0
|
||||
#define CONFIG_NETMASK 255.255.255.0
|
||||
/* You can compile in a MAC address and your custom net settings by using
|
||||
* the following syntax. Your board should be marked with the assigned
|
||||
* MAC addresses directly on it.
|
||||
*
|
||||
* #define CONFIG_ETHADDR de:ad:be:ef:00:00
|
||||
* #define CONFIG_ETH1ADDR fa:ke:ad:dr:es:s!
|
||||
* #define CONFIG_SERVERIP <server ip>
|
||||
* #define CONFIG_IPADDR <board ip>
|
||||
* #define CONFIG_GATEWAYIP <gateway ip>
|
||||
* #define CONFIG_NETMASK <your netmask>
|
||||
*/
|
||||
|
||||
#define CONFIG_HOSTNAME SBC8560
|
||||
#define CONFIG_ROOTPATH /home/ppc
|
||||
#define CONFIG_BOOTFILE pImage
|
||||
#define CONFIG_BOOTFILE uImage
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=2000000\0" \
|
||||
"ramdiskfile=ramdisk.uboot\0" \
|
||||
"fdtaddr=c00000\0" \
|
||||
"fdtfile=sbc8560.dtb\0"
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr - $fdtaddr"
|
||||
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
|
|||
|
|
@ -56,6 +56,12 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd);
|
|||
static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
|
||||
#endif /* CONFIG_HAS_FSL_DR_USB */
|
||||
|
||||
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83XX)
|
||||
void fdt_fixup_crypto_node(void *blob, int sec_rev);
|
||||
#else
|
||||
static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_OF_BOARD_SETUP
|
||||
void ft_board_setup(void *blob, bd_t *bd);
|
||||
void ft_cpu_setup(void *blob, bd_t *bd);
|
||||
|
|
|
|||
|
|
@ -61,21 +61,26 @@
|
|||
#endif
|
||||
|
||||
#define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16)
|
||||
#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) /* has SEC */
|
||||
#define SPR_FAMILY(spridr) ((spridr & 0xFFF00000) >> 20)
|
||||
|
||||
#define SPR_831X_FAMILY 0x80B
|
||||
#define SPR_8311 0x80B2
|
||||
#define SPR_8313 0x80B0
|
||||
#define SPR_8314 0x80B6
|
||||
#define SPR_8315 0x80B4
|
||||
#define SPR_832X_FAMILY 0x806
|
||||
#define SPR_8321 0x8066
|
||||
#define SPR_8323 0x8062
|
||||
#define SPR_834X_FAMILY 0x803
|
||||
#define SPR_8343 0x8036
|
||||
#define SPR_8347_TBGA_ 0x8032
|
||||
#define SPR_8347_PBGA_ 0x8034
|
||||
#define SPR_8349 0x8030
|
||||
#define SPR_836X_FAMILY 0x804
|
||||
#define SPR_8358_TBGA_ 0x804A
|
||||
#define SPR_8358_PBGA_ 0x804E
|
||||
#define SPR_8360 0x8048
|
||||
#define SPR_837X_FAMILY 0x80C
|
||||
#define SPR_8377 0x80C6
|
||||
#define SPR_8378 0x80C4
|
||||
#define SPR_8379 0x80C2
|
||||
|
|
|
|||
Loading…
Reference in New Issue