phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

TQM85xx: NAND support via local bus UPMB 

This patch adds support for NAND FLASH on the TQM8548. It is disabled by
default and can be enabled for the TQM8548 modules. It is now based on
the re-written FSL NAND UPM driver. A patch has been posted earlier today
with the subject:

"NAND FSL UPM: driver re-write using the hwcontrol callback"

Note that the R/B pin is not supported by that module requiring to use
the specified maximum delay time.

Note: With NAND support enabled the size of the U-Boot image exceeds
256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
doubling the image size :-(.

Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
This commit is contained in:
Wolfgang Grandegger 2008-06-05 13:12:09 +02:00 committed by Andrew Fleming-AFLEMING
parent b9e8078bb3
commit 1c2deff22c
5 changed files with 558 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
board/tqc/tqm85xx/Makefile
View File

@ -25,8 +25,14 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := $(BOARD).o sdram.o law.o tlb.o
COBJS-y += $(BOARD).o
COBJS-y += sdram.o
COBJS-y += law.o
COBJS-y += tlb.o
COBJS-$(CONFIG_NAND) += nand.o
COBJS := $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))

6
board/tqc/tqm85xx/law.c
View File

@ -35,7 +35,7 @@
* 0xc000_0000 0xdfff_ffff RapidIO or PCI express 512M
* 0xe000_0000 0xe000_ffff CCSR 1M
* 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
* 0xe300_0000 0xe3ff_ffff CAN 16M
* 0xe300_0000 0xe3ff_ffff CAN and NAND Flash 16M
* 0xef00_0000 0xefff_ffff PCI express IO 16M
* 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M
*
@ -54,9 +54,9 @@ struct law_entry law_table[] = {
#else /* !CONFIG_PCIE1 */
SET_LAW_ENTRY (5, CFG_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
#endif /* CONFIG_PCIE1 */
#ifdef CONFIG_CAN_DRIVER
#if defined(CONFIG_CAN_DRIVER) || defined(CONFIG_NAND)
SET_LAW_ENTRY (6, CFG_CAN_BASE, LAW_SIZE_16M, LAW_TRGT_IF_LBC),
#endif /* CONFIG_CAN_DRIVER */
#endif /* CONFIG_CAN_DRIVER || CONFIG_NAND */
#ifdef CONFIG_PCIE1
SET_LAW_ENTRY (7, CFG_PCIE1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCIE_1),
#endif /* CONFIG_PCIE */

469
board/tqc/tqm85xx/nand.c Normal file
View File

@ -0,0 +1,469 @@
/*
* (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
*
* (C) Copyright 2006
* Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/fsl_upm.h>
#include <ioports.h>
#include <nand.h>
DECLARE_GLOBAL_DATA_PTR;
extern uint get_lbc_clock (void);
/* index of UPM RAM array run pattern for NAND command cycle */
#define CFG_NAN_UPM_WRITE_CMD_OFS 0x08
/* index of UPM RAM array run pattern for NAND address cycle */
#define CFG_NAND_UPM_WRITE_ADDR_OFS 0x10
/* Structure for table with supported UPM timings */
struct upm_freq {
ulong freq;
const u32 *upm_patt;
uchar gpl4_disable;
uchar ehtr;
uchar ead;
};
/* NAND-FLASH UPM tables for TQM85XX according to TQM8548.pq.timing.101.doc */
/* UPM pattern for bus clock = 25 MHz */
static const u32 upm_patt_25[] = {
/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
/* 0x00 */ 0x0ff32000, 0x0fa32000, 0x3fb32005, 0xfffffc00,
/* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write CMD */
/* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
/* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Single RAM array entry -> NAND Write Data */
/* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Burst RAM array entry -> unused */
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Refresh Timer RAM array entry -> unused */
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Exception RAM array entry -> unsused */
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
};
/* UPM pattern for bus clock = 33.3 MHz */
static const u32 upm_patt_33[] = {
/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
/* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
/* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write CMD */
/* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
/* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Single RAM array entry -> NAND Write Data */
/* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Burst RAM array entry -> unused */
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Refresh Timer RAM array entry -> unused */
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Exception RAM array entry -> unsused */
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
};
/* UPM pattern for bus clock = 41.7 MHz */
static const u32 upm_patt_42[] = {
/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
/* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
/* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write CMD */
/* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
/* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Single RAM array entry -> NAND Write Data */
/* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Burst RAM array entry -> unused */
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Refresh Timer RAM array entry -> unused */
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Exception RAM array entry -> unsused */
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
};
/* UPM pattern for bus clock = 50 MHz */
static const u32 upm_patt_50[] = {
/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
/* 0x00 */ 0x0ff33000, 0x0fa33100, 0x0fa33005, 0xfffffc00,
/* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write CMD */
/* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c35, 0xfffffc00,
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
/* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc35, 0xfffffc00,
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Single RAM array entry -> NAND Write Data */
/* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c05, 0xfffffc00,
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Burst RAM array entry -> unused */
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Refresh Timer RAM array entry -> unused */
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Exception RAM array entry -> unsused */
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
};
/* UPM pattern for bus clock = 66.7 MHz */
static const u32 upm_patt_67[] = {
/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
/* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
/* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write CMD */
/* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
/* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Single RAM array entry -> NAND Write Data */
/* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Burst RAM array entry -> unused */
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Refresh Timer RAM array entry -> unused */
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Exception RAM array entry -> unsused */
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
};
/* UPM pattern for bus clock = 83.3 MHz */
static const u32 upm_patt_83[] = {
/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
/* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
/* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write CMD */
/* 0x08 */ 0x00ff3e30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
/* 0x10 */ 0x00f3fe30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Single RAM array entry -> NAND Write Data */
/* 0x18 */ 0x00f33e00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Burst RAM array entry -> unused */
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Refresh Timer RAM array entry -> unused */
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Exception RAM array entry -> unsused */
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
};
/* UPM pattern for bus clock = 100 MHz */
static const u32 upm_patt_100[] = {
/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
/* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33200, 0x0fa33000,
/* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write CMD */
/* 0x08 */ 0x00ff3f30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
/* 0x10 */ 0x00f3ff30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Single RAM array entry -> NAND Write Data */
/* 0x18 */ 0x00f33f00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Burst RAM array entry -> unused */
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Refresh Timer RAM array entry -> unused */
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Exception RAM array entry -> unsused */
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
};
/* UPM pattern for bus clock = 133.3 MHz */
static const u32 upm_patt_133[] = {
/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
/* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33300, 0x0fa33000,
/* 0x04 */ 0x0fa33000, 0x0fa33005, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write CMD */
/* 0x08 */ 0x00ff3f30, 0x00ff3d30, 0x0fff3d30, 0x0fff3c35,
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
/* 0x10 */ 0x00f3ff30, 0x00f3fd30, 0x0ff3fd30, 0x0ff3fc35,
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Single RAM array entry -> NAND Write Data */
/* 0x18 */ 0x00f33f00, 0x00f33d00, 0x0ff33d00, 0x0ff33c05,
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Burst RAM array entry -> unused */
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Refresh Timer RAM array entry -> unused */
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Exception RAM array entry -> unsused */
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
};
/* UPM pattern for bus clock = 166.7 MHz */
static const u32 upm_patt_167[] = {
/* Offset *//* UPM Read Single RAM array entry -> NAND Read Data */
/* 0x00 */ 0x0ff33200, 0x0fe33000, 0x0fa33300, 0x0fa33300,
/* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write CMD */
/* 0x08 */ 0x00ff3f30, 0x00ff3f30, 0x0fff3e30, 0xffff3c35,
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
/* 0x10 */ 0x00f3ff30, 0x00f3ff30, 0x0ff3fe30, 0x0ff3fc35,
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Single RAM array entry -> NAND Write Data */
/* 0x18 */ 0x00f33f00, 0x00f33f00, 0x0ff33e00, 0x0ff33c05,
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Burst RAM array entry -> unused */
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Refresh Timer RAM array entry -> unused */
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Exception RAM array entry -> unsused */
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
};
/* Supported UPM timings */
struct upm_freq upm_freq_table[] = {
/* nominal freq. | ptr to table | GPL4 dis. | EHTR | EAD */
{25000000, upm_patt_25, 1, 0, 0},
{33333333, upm_patt_33, 1, 0, 0},
{41666666, upm_patt_42, 1, 0, 0},
{50000000, upm_patt_50, 0, 0, 0},
{66666666, upm_patt_67, 0, 0, 0},
{83333333, upm_patt_83, 0, 0, 0},
{100000000, upm_patt_100, 0, 1, 1},
{133333333, upm_patt_133, 0, 1, 1},
{166666666, upm_patt_167, 0, 1, 1},
};
#define UPM_FREQS (sizeof(upm_freq_table) / sizeof(struct upm_freq))
volatile const u32 *nand_upm_patt;
/*
* write into UPMB ram
*/
static void upmb_write (u_char addr, ulong val)
{
volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
out_be32 (&lbc->mdr, val);
clrsetbits_be32(&lbc->mbmr, MxMR_MAD_MSK,
MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
/* dummy access to perform write */
out_8 ((void __iomem *)CFG_NAND0_BASE, 0);
clrbits_be32(&lbc->mbmr, MxMR_OP_WARR);
}
/*
* Initialize UPM for NAND flash access.
*/
static void nand_upm_setup (volatile ccsr_lbc_t *lbc)
{
uint i;
uint or3 = CFG_OR3_PRELIM;
uint clock = get_lbc_clock ();
out_be32 (&lbc->br3, 0); /* disable bank and reset all bits */
out_be32 (&lbc->br3, CFG_BR3_PRELIM);
/*
* Search appropriate UPM table for bus clock.
* If the bus clock exceeds a tolerated value, take the UPM timing for
* the next higher supported frequency to ensure that access works
* (even the access may be slower then).
*/
for (i = 0; (i < UPM_FREQS) && (clock > upm_freq_table[i].freq); i++)
;
if (i >= UPM_FREQS)
/* no valid entry found */
/* take last entry with configuration for max. bus clock */
i--;
if (upm_freq_table[i].ehtr) {
/* EHTR must be set due to TQM8548 timing specification */
or3 |= OR_UPM_EHTR;
}
if (upm_freq_table[i].ead)
/* EAD must be set due to TQM8548 timing specification */
or3 |= OR_UPM_EAD;
out_be32 (&lbc->or3, or3);
/* Assign address of table */
nand_upm_patt = upm_freq_table[i].upm_patt;
for (i = 0; i < 64; i++) {
upmb_write (i, *nand_upm_patt);
nand_upm_patt++;
}
/* Put UPM back to normal operation mode */
if (upm_freq_table[i].gpl4_disable)
/* GPL4 must be disabled according to timing specification */
out_be32 (&lbc->mbmr, MxMR_OP_NORM | MxMR_GPL_x4DIS);
return;
}
static struct fsl_upm_nand fun = {
.width = 8,
.upm_cmd_offset = 0x08,
.upm_addr_offset = 0x10,
.chip_delay = NAND_BIG_DELAY_US,
};
void board_nand_select_device (struct nand_chip *nand, int chip)
{
}
int board_nand_init (struct nand_chip *nand)
{
volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
if (!nand_upm_patt)
nand_upm_setup (lbc);
fun.upm.io_addr = nand->IO_ADDR_R;
fun.upm.mxmr = (void __iomem *)&lbc->mbmr;
fun.upm.mdr = (void __iomem *)&lbc->mdr;
fun.upm.mar = (void __iomem *)&lbc->mar;
return fsl_upm_nand_init (nand, &fun);
}

2
board/tqc/tqm85xx/tlb.c
View File

@ -114,7 +114,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
* TLB 6: 64M Non-cacheable, guarded
* 0xe0000000 1M CCSRBAR
* 0xe2000000 16M PCI1 IO
* 0xe3000000 16M CAN
* 0xe3000000 16M CAN and NAND Flash
*/
SET_TLB_ENTRY (1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,

81
include/configs/TQM85xx.h
View File

@ -54,6 +54,14 @@
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
/*
* NAND flash support (disabled by default)
*
* Warning: NAND support will likely increase the U-Boot image size
* to more than 256 KB. Please adjust TEXT_BASE if necessary.
*/
#undef CONFIG_NAND
/*
* MPC8540 and MPC8548 don't have CPM module
*/
@ -205,8 +213,8 @@
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256kB for Mon */
#define CFG_MALLOC_LEN (256 * 1024) /* Reserved for malloc */
#define CFG_MONITOR_LEN (~TEXT_BASE + 1)/* Reserved for Monitor */
#define CFG_MALLOC_LEN (384 * 1024) /* Reserved for malloc */
/* Serial Port */
#if defined(CONFIG_TQM8560)
@ -253,8 +261,8 @@
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* CAN */
#ifdef CONFIG_CAN_DRIVER
#define CFG_CAN_BASE 0xE3000000 /* CAN base address */
#ifdef CONFIG_CAN_DRIVER
#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 KiB address mask */
#define CFG_OR2_CAN (CFG_CAN_OR_AM | OR_UPM_BI)
#define CFG_BR2_CAN ((CFG_CAN_BASE & BR_BA) | \
@ -301,6 +309,53 @@
#define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */
#endif /* CONFIG_PCIE1 */
/* NAND FLASH */
#ifdef CONFIG_NAND
#undef CFG_NAND_LEGACY
#define CONFIG_NAND_FSL_UPM 1
#define CONFIG_MTD_NAND_ECC_JFFS2 1 /* use JFFS2 ECC */
/* address distance between chip selects */
#define CFG_NAND_SELECT_DEVICE 1
#define CFG_NAND_CS_DIST 0x200
#define CFG_NAND_SIZE 0x8000
#define CFG_NAND0_BASE 0xE3010000
#define CFG_NAND1_BASE (CFG_NAND0_BASE + CFG_NAND_CS_DIST)
#define CFG_NAND2_BASE (CFG_NAND1_BASE + CFG_NAND_CS_DIST)
#define CFG_NAND3_BASE (CFG_NAND2_BASE + CFG_NAND_CS_DIST)
#define CFG_MAX_NAND_DEVICE 2 /* Max number of NAND devices */
#define NAND_MAX_CHIPS 1
#if (CFG_MAX_NAND_DEVICE == 1)
#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE }
#elif (CFG_MAX_NAND_DEVICE == 2)
#define CFG_NAND_QUIET_TEST 1
#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
CFG_NAND1_BASE, \
}
#elif (CFG_MAX_NAND_DEVICE == 4)
#define CFG_NAND_QUIET_TEST 1
#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
CFG_NAND1_BASE, \
CFG_NAND2_BASE, \
CFG_NAND3_BASE, \
}
#endif
/* CS3 for NAND Flash */
#define CFG_BR3_PRELIM ((CFG_NAND0_BASE & BR_BA) | BR_PS_8 | \
BR_MS_UPMB | BR_V)
#define CFG_OR3_PRELIM (P2SZ_TO_AM(CFG_NAND_SIZE) | OR_UPM_BI)
#define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */
#endif /* CONFIG_NAND */
/*
* General PCI
* Addresses are mapped 1-1.
@ -486,6 +541,26 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#ifdef CONFIG_NAND
/*
* Use NAND-FLash as JFFS2 device
*/
#define CONFIG_CMD_NAND
#define CONFIG_CMD_JFFS2
#define CONFIG_JFFS2_NAND 1
#ifdef CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT "nand0=TQM85xx-nand"
#define MTDPARTS_DEFAULT "mtdparts=TQM85xx-nand:-"
#else
#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */
#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
#define CONFIG_JFFS2_PART_SIZE 0x200000 /* size of jffs2 partition */
#endif /* CONFIG_JFFS2_CMDLINE */
#endif /* CONFIG_NAND */
/*
* Command line configuration.
*/