phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

ppc4xx: Enable USB on PLU405 boards 

This patch enables the PCI-OHCI controller on PLU405 board.

Also the default CPU frequency is updated to 266 MHz and
command line editing is enabled.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Matthias Fuchs 2008-09-02 11:35:56 +02:00 committed by Stefan Roese
parent 40e43e3b87
commit 17e65c21ad
1 changed files with 16 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
include/configs/PLU405.h
View File

@ -88,6 +88,7 @@
#define CONFIG_CMD_MII #define CONFIG_CMD_MII
#define CONFIG_CMD_PING #define CONFIG_CMD_PING
#define CONFIG_CMD_EEPROM #define CONFIG_CMD_EEPROM
#define CONFIG_CMD_USB
#define CONFIG_OF_LIBFDT #define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP #define CONFIG_OF_BOARD_SETUP
@ -150,6 +151,7 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
@ -192,7 +194,7 @@
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */ #define CONFIG_PCI /* include pci support */
#define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */ /* resource configuration */
@ -208,7 +210,7 @@
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ #define CFG_PCI_PTM2PCI 0x08000000 /* Host: use this pci address */
/*----------------------------------------------------------------------- /*-----------------------------------------------------------------------
* IDE/ATA stuff * IDE/ATA stuff
@ -406,7 +408,7 @@
* Default speed selection (cpu_plb_opb_ebc) in mhz. * Default speed selection (cpu_plb_opb_ebc) in mhz.
* This value will be set if iic boot eprom is disabled. * This value will be set if iic boot eprom is disabled.
*/ */
#if 0 #if 1
#define PLLMR0_DEFAULT PLLMR0_266_133_66_33 #define PLLMR0_DEFAULT PLLMR0_266_133_66_33
#define PLLMR1_DEFAULT PLLMR1_266_133_66_33 #define PLLMR1_DEFAULT PLLMR1_266_133_66_33
#endif #endif
@ -414,9 +416,19 @@
#define PLLMR0_DEFAULT PLLMR0_200_100_50_33 #define PLLMR0_DEFAULT PLLMR0_200_100_50_33
#define PLLMR1_DEFAULT PLLMR1_200_100_50_33 #define PLLMR1_DEFAULT PLLMR1_200_100_50_33
#endif #endif
#if 1 #if 0
#define PLLMR0_DEFAULT PLLMR0_133_66_66_33 #define PLLMR0_DEFAULT PLLMR0_133_66_66_33
#define PLLMR1_DEFAULT PLLMR1_133_66_66_33 #define PLLMR1_DEFAULT PLLMR1_133_66_66_33
#endif #endif
/*
* PCI OHCI controller
*/
#define CONFIG_USB_OHCI_NEW 1
#define CONFIG_PCI_OHCI 1
#define CFG_OHCI_SWAP_REG_ACCESS 1
#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
#define CFG_USB_OHCI_SLOT_NAME "ohci_pci"
#define CONFIG_USB_STORAGE 1
#endif /* __CONFIG_H */ #endif /* __CONFIG_H */