NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...

Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>

include/configs/ASH405.h

@@ -157,8 +157,10 @@
 #define CONFIG_SYS_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CONFIG_SYS_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
-#define CONFIG_SYS_NAND_QUIET          1
+#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I	1	/* ".i" read skips bad blocks   */
+#define CONFIG_SYS_NAND_QUIET		1
+
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 /*-----------------------------------------------------------------------
  * PCI stuff

include/configs/CMS700.h

@@ -165,6 +165,8 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET          1
 
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is

include/configs/HH405.h

@@ -219,6 +219,8 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET          1
 
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------

include/configs/HUB405.h

@@ -160,6 +160,8 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET          1
 
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------

include/configs/IDS8247.h

@@ -265,6 +265,8 @@
 #define CONFIG_SYS_NAND0_BASE 0xE1000000
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices           */
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 #endif /* CONFIG_CMD_NAND */
 
 /*-----------------------------------------------------------------------

include/configs/PLU405.h

@@ -183,6 +183,8 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET          1
 
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 /*
  * PCI stuff
  */

include/configs/PPChameleonEVB.h

@@ -210,6 +210,9 @@
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------
  */
+
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 /*
  * nand device 1 on dave (PPChameleonEVB) needs more time,
  * so we just introduce additional wait in nand_wait(),

include/configs/TQM8272.h

@@ -439,6 +439,8 @@
 	WRITE_NAND(d, addr); \
 } while(0)
 
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 #endif /* CONFIG_CMD_NAND */
 
 #define	CONFIG_PCI

include/configs/TQM85xx.h

@@ -374,6 +374,8 @@
 
 #define NAND_BIG_DELAY_US		25	/* max tR for Samsung devices	*/
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 #endif /* CONFIG_NAND */
 
 /*

include/configs/VOH405.h

@@ -169,6 +169,8 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET          1
 
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------

include/configs/WUH405.h

@@ -157,6 +157,8 @@
 
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
 
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------

include/configs/acadia.h

@@ -265,6 +265,8 @@
 #define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
 #define CONFIG_SYS_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/

include/configs/kilauea.h

@@ -217,6 +217,8 @@
 #define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
 #define CONFIG_SYS_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/

include/configs/quad100hd.h

@@ -225,6 +225,8 @@
 #define CONFIG_SYS_NAND_CLE	31   /* our CLE is GPIO31 */
 #define CONFIG_SYS_NAND_ALE	30   /* our ALE is GPIO30 */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
+
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #endif
 
 /*-----------------------------------------------------------------------

include/configs/sc3.h

@@ -426,6 +426,7 @@ extern unsigned long offsetOfEnvironment;
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x77D00000
 
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
 

include/configs/socrates.h

@@ -188,6 +188,8 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_CMD_NAND
 
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 /* LIME GDC */
 #define CONFIG_SYS_LIME_BASE		0xc8000000
 #define CONFIG_SYS_LIME_SIZE		0x04000000	/* 64 MB	*/