Patch by Yuli Barcohen, 19 Apr 2004:

- Rename DUET_ADS to MPC885ADS
- Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
- Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
- Clean up FADS family port to use the new defines
This commit is contained in:
wdenk 2004-06-06 21:35:06 +00:00
parent d7a04603ae
commit 1114257c9d
15 changed files with 136 additions and 104 deletions

View File

@ -2,6 +2,12 @@
Changes since U-Boot 1.1.1: Changes since U-Boot 1.1.1:
====================================================================== ======================================================================
* Patch by Yuli Barcohen, 19 Apr 2004:
- Rename DUET_ADS to MPC885ADS
- Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
- Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
- Clean up FADS family port to use the new defines
* Fix PCI support on CPC45 board * Fix PCI support on CPC45 board
* Patch by Scott McNutt, 25 Apr 2004: * Patch by Scott McNutt, 25 Apr 2004:

View File

@ -34,7 +34,7 @@ LIST_5xxx=" \
LIST_8xx=" \ LIST_8xx=" \
AdderII ADS860 AMX860 c2mon \ AdderII ADS860 AMX860 c2mon \
CCM cogent_mpc8xx DUET_ADS ESTEEM192E \ CCM cogent_mpc8xx MPC885ADS ESTEEM192E \
ETX094 ELPT860 FADS823 FADS850SAR \ ETX094 ELPT860 FADS823 FADS850SAR \
FADS860T FLAGADM FPS850L GEN860T \ FADS860T FLAGADM FPS850L GEN860T \
GEN860T_SC GENIETV GTH hermes \ GEN860T_SC GENIETV GTH hermes \

View File

@ -266,10 +266,10 @@ AdderII_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx adderII @./mkconfig $(@:_config=) ppc mpc8xx adderII
ADS860_config \ ADS860_config \
DUET_ADS_config \
FADS823_config \ FADS823_config \
FADS850SAR_config \ FADS850SAR_config \
MPC86xADS_config \ MPC86xADS_config \
MPC885ADS_config \
FADS860T_config: unconfig FADS860T_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx fads @./mkconfig $(@:_config=) ppc mpc8xx fads

View File

@ -24,8 +24,8 @@
# #
# #
# Motorola old MPC821/860ADS, MPC8xxFADS, new MPC866ADS, and DUET # Motorola old MPC821/860ADS, MPC8xxFADS, new MPC866ADS, and
# (MPC87x/88x) ADS boards # MPC885ADS boards
# #
TEXT_BASE = 0xFE000000 TEXT_BASE = 0xFE000000

View File

@ -26,12 +26,13 @@
#include <config.h> #include <config.h>
#include <common.h> #include <common.h>
#include <mpc8xx.h> #include <mpc8xx.h>
#include <pcmcia.h>
#define _NOT_USED_ 0xFFFFFFFF #define _NOT_USED_ 0xFFFFFFFF
/* ========================================================================= */ /* ========================================================================= */
#ifndef CONFIG_DUET_ADS /* No old DRAM on Duet */ #ifndef CONFIG_MPC885ADS /* No old DRAM on MPC885ADS */
#if defined(CONFIG_DRAM_50MHZ) #if defined(CONFIG_DRAM_50MHZ)
/* 50MHz tables */ /* 50MHz tables */
@ -290,7 +291,7 @@ static void _dramdisable(void)
/* maybe we should turn off upma here or something */ /* maybe we should turn off upma here or something */
} }
#endif /* !CONFIG_DUET_ADS */ #endif /* !CONFIG_MPC885ADS */
/* ========================================================================= */ /* ========================================================================= */
@ -604,7 +605,7 @@ long int initdram (int board_type)
uint sdramsz = 0; /* size of sdram in Mbytes */ uint sdramsz = 0; /* size of sdram in Mbytes */
uint base = 0; /* base of dram in bytes */ uint base = 0; /* base of dram in bytes */
uint m = 0; /* size of dram in Mbytes */ uint m = 0; /* size of dram in Mbytes */
#ifndef CONFIG_DUET_ADS #ifndef CONFIG_MPC885ADS
uint k, s; uint k, s;
#endif #endif
@ -614,7 +615,7 @@ long int initdram (int board_type)
printf ("(%u MB SDRAM) ", sdramsz); printf ("(%u MB SDRAM) ", sdramsz);
} }
#endif #endif
#ifndef CONFIG_DUET_ADS /* No old DRAM on Duet */ #ifndef CONFIG_MPC885ADS /* No old DRAM on MPC885ADS */
k = (*((uint *) BCSR2) >> 23) & 0x0f; k = (*((uint *) BCSR2) >> 23) & 0x0f;
switch (k & 0x3) { switch (k & 0x3) {
@ -665,7 +666,7 @@ long int initdram (int board_type)
_dramdisable (); _dramdisable ();
m = 0; m = 0;
} }
#endif /* !CONFIG_DUET_ADS */ #endif /* !CONFIG_MPC885ADS */
m += sdramsz; /* add sdram size to total */ m += sdramsz; /* add sdram size to total */
return (m << 20); return (m << 20);
@ -734,8 +735,8 @@ int checkboard (void)
#if defined(CONFIG_MPC86xADS) #if defined(CONFIG_MPC86xADS)
puts ("MPC86xADS"); puts ("MPC86xADS");
#elif defined(CONFIG_DUET_ADS) #elif defined(CONFIG_MPC885ADS)
puts ("DUET ADS"); puts ("MPC885ADS");
r = 0; /* I've got NR (No Revision) board */ r = 0; /* I've got NR (No Revision) board */
#elif defined(CONFIG_FADS) #elif defined(CONFIG_FADS)
puts ("FADS"); puts ("FADS");
@ -759,7 +760,7 @@ int checkboard (void)
case 0x03: case 0x03:
puts ("B \n"); puts ("B \n");
break; break;
#elif defined(CONFIG_DUET_ADS) #elif defined(CONFIG_MPC885ADS)
case 0x00: case 0x00:
puts ("NR\n"); puts ("NR\n");
break; break;
@ -790,7 +791,7 @@ volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
int pcmcia_init(void) int pcmcia_init(void)
{ {
volatile pcmconf8xx_t *pcmp; volatile pcmconf8xx_t *pcmp;
uint v, slota, slotb; uint v, slota = 0, slotb = 0;
/* /*
** Enable the PCMCIA for a Flash card. ** Enable the PCMCIA for a Flash card.
@ -805,10 +806,10 @@ int pcmcia_init(void)
/* Set all slots to zero by default. */ /* Set all slots to zero by default. */
pcmp->pcmc_pgcra = 0; pcmp->pcmc_pgcra = 0;
pcmp->pcmc_pgcrb = 0; pcmp->pcmc_pgcrb = 0;
#ifdef PCMCIA_SLOT_A #ifdef CONFIG_PCMCIA_SLOT_A
pcmp->pcmc_pgcra = 0x40; pcmp->pcmc_pgcra = 0x40;
#endif #endif
#ifdef PCMCIA_SLOT_B #ifdef CONFIG_PCMCIA_SLOT_B
pcmp->pcmc_pgcrb = 0x40; pcmp->pcmc_pgcrb = 0x40;
#endif #endif
@ -817,17 +818,17 @@ int pcmcia_init(void)
/* Check if any PCMCIA card is plugged in. */ /* Check if any PCMCIA card is plugged in. */
#ifdef CONFIG_PCMCIA_SLOT_A
slota = (pcmp->pcmc_pipr & 0x18000000) == 0 ; slota = (pcmp->pcmc_pipr & 0x18000000) == 0 ;
#endif
#ifdef CONFIG_PCMCIA_SLOT_B
slotb = (pcmp->pcmc_pipr & 0x00001800) == 0 ; slotb = (pcmp->pcmc_pipr & 0x00001800) == 0 ;
#endif
if (!(slota || slotb)) { if (!(slota || slotb)) {
printf("No card present\n"); printf("No card present\n");
#ifdef PCMCIA_SLOT_A
pcmp->pcmc_pgcra = 0; pcmp->pcmc_pgcra = 0;
#endif
#ifdef PCMCIA_SLOT_B
pcmp->pcmc_pgcrb = 0; pcmp->pcmc_pgcrb = 0;
#endif
return -1; return -1;
} }
else else
@ -908,9 +909,10 @@ int pcmcia_init(void)
udelay(20); udelay(20);
#ifdef PCMCIA_SLOT_A #ifdef CONFIG_PCMCIA_SLOT_A
pcmp->pcmc_pgcra = 0; pcmp->pcmc_pgcra = 0;
#elif PCMCIA_SLOT_B #endif
#ifdef CONFIG_PCMCIA_SLOT_B
pcmp->pcmc_pgcrb = 0; pcmp->pcmc_pgcrb = 0;
#endif #endif

View File

@ -48,9 +48,6 @@
* | ... | v * | ... | v
* *
*****************************************************************************/ *****************************************************************************/
/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
/* in general, we always know this for FADS+new ADS anyway */
#define CONFIG_8xx_GCLK_FREQ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
#if 0 #if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #define CONFIG_BOOTDELAY -1 /* autoboot disabled */
@ -66,6 +63,7 @@
"bootm" "bootm"
#undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
/* /*
* New MPC86xADS and Duet provide two Ethernet connectivity options: * New MPC86xADS and Duet provide two Ethernet connectivity options:
@ -90,11 +88,12 @@
#endif #endif
#ifndef CONFIG_COMMANDS #ifndef CONFIG_COMMANDS
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
| CFG_CMD_DHCP \ | CFG_CMD_DHCP \
| CFG_CMD_IMMAP \ | CFG_CMD_IMMAP \
| CFG_CMD_MII \ | CFG_CMD_MII \
| CFG_CMD_PING \ | CFG_CMD_PCMCIA \
| CFG_CMD_PING \
) )
#endif /* !CONFIG_COMMANDS */ #endif /* !CONFIG_COMMANDS */
@ -146,7 +145,7 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0 * Please note that CFG_SDRAM_BASE _must_ start at 0
*/ */
#define CFG_SDRAM_BASE 0x00000000 #define CFG_SDRAM_BASE 0x00000000
#if defined(CONFIG_MPC86xADS) || defined(CONFIG_DUET_ADS) /* New ADS or Duet */ #if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC885ADS) /* New ADS or Duet */
#define CFG_SDRAM_SIZE 0x00800000 /* 8 Mbyte */ #define CFG_SDRAM_SIZE 0x00800000 /* 8 Mbyte */
#elif defined(CONFIG_FADS) /* Old/new FADS */ #elif defined(CONFIG_FADS) /* Old/new FADS */
#define CFG_SDRAM_SIZE 0x00400000 /* 4 Mbyte */ #define CFG_SDRAM_SIZE 0x00400000 /* 4 Mbyte */
@ -186,7 +185,12 @@
#define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */ #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */
#ifdef CONFIG_BZIP2
#define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */
#else
#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ #define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
#endif /* CONFIG_BZIP2 */
/*----------------------------------------------------------------------- /*-----------------------------------------------------------------------
* Cache Configuration * Cache Configuration
@ -248,7 +252,16 @@
#define SCCR_MASK SCCR_EBDF11 #define SCCR_MASK SCCR_EBDF11
#define CFG_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00) #define CFG_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
/*----------------------------------------------------------------------- /*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register 14-22
*-----------------------------------------------------------------------
* set the PLL, the low-power modes and the reset control
*/
#ifndef CFG_PLPRCR
#define CFG_PLPRCR PLPRCR_TEXPS
#endif
/*-----------------------------------------------------------------------
* *
*----------------------------------------------------------------------- *-----------------------------------------------------------------------
* *
@ -407,6 +420,20 @@
#define BCSR4_DATA_VOICE ((uint)0x00080000) #define BCSR4_DATA_VOICE ((uint)0x00080000)
#endif /* CONFIG_MPC850 */ #endif /* CONFIG_MPC850 */
/* BSCR5 exists on MPC86xADS and Duet ADS only */
#define CFG_PHYDEV_ADDR (BCSR_ADDR + 0x20000)
#define BCSR5 (CFG_PHYDEV_ADDR + 0x300)
#define BCSR5_MII2_EN 0x40
#define BCSR5_MII2_RST 0x20
#define BCSR5_T1_RST 0x10
#define BCSR5_ATM155_RST 0x08
#define BCSR5_ATM25_RST 0x04
#define BCSR5_MII1_EN 0x02
#define BCSR5_MII1_RST 0x01
/* We don't use the 8259. /* We don't use the 8259.
*/ */
#define NR_8259_INTS 0 #define NR_8259_INTS 0
@ -419,10 +446,6 @@
* PCMCIA stuff * PCMCIA stuff
*----------------------------------------------------------------------- *-----------------------------------------------------------------------
*/ */
#if !defined(CONFIG_MPC823) && !defined(CONFIG_MPC850)
#define PCMCIA_SLOT_A 1
#endif
#define CFG_PCMCIA_MEM_ADDR (0xE0000000) #define CFG_PCMCIA_MEM_ADDR (0xE0000000)
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) #define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
#define CFG_PCMCIA_DMA_ADDR (0xE4000000) #define CFG_PCMCIA_DMA_ADDR (0xE4000000)

View File

@ -388,7 +388,7 @@ static void fec_pin_init(int fecidx)
fecp->fec_mii_speed <<= 1; fecp->fec_mii_speed <<= 1;
#endif #endif
#if defined(CONFIG_DUET) && defined(WANT_MII) #if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
/* use MDC for MII */ /* use MDC for MII */
immr->im_ioport.iop_pdpar |= 0x0080; immr->im_ioport.iop_pdpar |= 0x0080;
immr->im_ioport.iop_pddir &= ~0x0080; immr->im_ioport.iop_pddir &= ~0x0080;
@ -397,7 +397,7 @@ static void fec_pin_init(int fecidx)
if (fecidx == 0) { if (fecidx == 0) {
#if defined(CONFIG_ETHER_ON_FEC1) #if defined(CONFIG_ETHER_ON_FEC1)
#if defined(CONFIG_DUET) /* MPC87x/88x have got 2 FECs and different pinout */ #if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
#if !defined(CONFIG_RMII) #if !defined(CONFIG_RMII)
@ -489,7 +489,7 @@ static void fec_pin_init(int fecidx)
#if defined(CONFIG_ETHER_ON_FEC2) #if defined(CONFIG_ETHER_ON_FEC2)
#if defined(CONFIG_DUET) /* MPC87x/88x have got 2 FECs and different pinout */ #if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
#if !defined(CONFIG_RMII) #if !defined(CONFIG_RMII)
@ -516,7 +516,7 @@ static void fec_pin_init(int fecidx)
immr->im_cpm.cp_cptr &= ~0x00000028; immr->im_cpm.cp_cptr &= ~0x00000028;
#endif /* CONFIG_RMII */ #endif /* CONFIG_RMII */
#endif /* CONFIG_DUET */ #endif /* CONFIG_MPC885_FAMILY */
#endif /* CONFIG_ETHER_ON_FEC2 */ #endif /* CONFIG_ETHER_ON_FEC2 */
@ -533,7 +533,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
if (efis->ether_index == 0) { if (efis->ether_index == 0) {
#if defined(CONFIG_FADS) /* FADS family uses FPGA (BCSR) to control PHYs */ #if defined(CONFIG_FADS) /* FADS family uses FPGA (BCSR) to control PHYs */
#if defined(CONFIG_DUET_ADS) #if defined(CONFIG_MPC885ADS)
*(vu_char *) BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST); *(vu_char *) BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST);
#else #else
/* configure FADS for fast (FEC) ethernet, half-duplex */ /* configure FADS for fast (FEC) ethernet, half-duplex */
@ -553,7 +553,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
*bcsr4 |= BCSR4_FETHRST; *bcsr4 |= BCSR4_FETHRST;
udelay (10); udelay (10);
} }
#endif /* CONFIG_DUET_ADS */ #endif /* CONFIG_MPC885ADS */
#endif /* CONFIG_FADS */ #endif /* CONFIG_FADS */
} }
@ -948,7 +948,7 @@ void mii_init (void)
*/ */
fecp->fec_ievent = 0xffc0; fecp->fec_ievent = 0xffc0;
/* Setup the pin configuration of the FEC(s) /* Setup the pin configuration of the FEC(s)
*/ */
fec_pin_init(ether_fcc_info[i].ether_index); fec_pin_init(ether_fcc_info[i].ether_index);

View File

@ -90,7 +90,7 @@ unsigned long measure_gclk(void)
ulong timer2_val; ulong timer2_val;
ulong msr_val; ulong msr_val;
#ifdef CONFIG_MPC866_et_al #ifdef CFG_8XX_XIN
/* dont use OSCM, only use EXTCLK/512 */ /* dont use OSCM, only use EXTCLK/512 */
immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV; immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
#else #else
@ -162,7 +162,7 @@ unsigned long measure_gclk(void)
timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2); timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
immr->im_sit.sit_piscr &= ~PISCR_PTE; immr->im_sit.sit_piscr &= ~PISCR_PTE;
#if defined(CONFIG_MPC866_et_al) #if defined(CFG_8XX_XIN)
/* not using OSCM, using XIN, so scale appropriately */ /* not using OSCM, using XIN, so scale appropriately */
return (((timer2_val + 2) / 4) * (CFG_8XX_XIN/512))/8192 * 100000L; return (((timer2_val + 2) / 4) * (CFG_8XX_XIN/512))/8192 * 100000L;
#else #else
@ -183,22 +183,39 @@ int get_clocks (void)
{ {
DECLARE_GLOBAL_DATA_PTR; DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immr = (immap_t *) CFG_IMMR; uint immr = get_immr (0); /* Return full IMMR contents */
#ifndef CONFIG_8xx_GCLK_FREQ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
gd->cpu_clk = measure_gclk(); uint sccr = immap->im_clkrst.car_sccr;
#else /* CONFIG_8xx_GCLK_FREQ */
/* /*
* If for some reason measuring the gclk frequency won't * If for some reason measuring the gclk frequency won't
* work, we return the hardwired value. * work, we return the hardwired value.
* (For example, the cogent CMA286-60 CPU module has no * (For example, the cogent CMA286-60 CPU module has no
* separate oscillator for PITRTCLK) * separate oscillator for PITRTCLK)
*/ */
#if defined(CONFIG_8xx_GCLK_FREQ)
gd->cpu_clk = CONFIG_8xx_GCLK_FREQ; gd->cpu_clk = CONFIG_8xx_GCLK_FREQ;
#elif defined(CONFIG_8xx_OSCLK)
#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
uint pll = immap->im_clkrst.car_plprcr;
uint clk;
if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
clk = ((CONFIG_8xx_OSCLK / (PLPRCR_val(PDF)+1)) *
(PLPRCR_val(MFI) + PLPRCR_val(MFN) / (PLPRCR_val(MFD)+1))) /
(1<<PLPRCR_val(S));
} else {
clk = CONFIG_8xx_OSCLK * (PLPRCR_val(MF)+1);
}
if (pll & PLPRCR_CSRC) { /* Low frequency division factor is used */
gd->cpu_clk = clk / (2 << ((sccr >> 8) & 7));
} else { /* High frequency division factor is used */
gd->cpu_clk = clk / (1 << ((sccr >> 5) & 7));
}
#else
gd->cpu_clk = measure_gclk();
#endif /* CONFIG_8xx_GCLK_FREQ */ #endif /* CONFIG_8xx_GCLK_FREQ */
if ((immr->im_clkrst.car_sccr & SCCR_EBDF11) == 0) { if ((sccr & SCCR_EBDF11) == 0) {
/* No Bus Divider active */ /* No Bus Divider active */
gd->bus_clk = gd->cpu_clk; gd->bus_clk = gd->cpu_clk;
} else { } else {
@ -209,7 +226,7 @@ int get_clocks (void)
return (0); return (0);
} }
#else /* CONFIG_MPC866_et_al */ #else /* CONFIG_MPC866_FAMILY */
static long init_pll_866 (long clk); static long init_pll_866 (long clk);
@ -345,7 +362,7 @@ static long init_pll_866 (long clk)
return (n); return (n);
} }
#endif /* CONFIG_MPC866_et_al */ #endif /* CONFIG_MPC866_FAMILY */
#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
/* /*

View File

@ -475,7 +475,7 @@ typedef struct comm_proc {
#define lcd_cmap fl_un.fl_un_cmap #define lcd_cmap fl_un.fl_un_cmap
char res18[0xE00]; char res18[0xE00];
/* The DUET family has a second FEC here */ /* The MPC885 family has a second FEC here */
fec_t cp_fec2; fec_t cp_fec2;
#define cp_fec1 cp_fec /* consistency macro */ #define cp_fec1 cp_fec /* consistency macro */

View File

@ -48,17 +48,17 @@ typedef volatile unsigned char vu_char;
defined(CONFIG_MPC859DSL) || \ defined(CONFIG_MPC859DSL) || \
defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \ defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \
defined(CONFIG_MPC866P) defined(CONFIG_MPC866P)
# define CONFIG_MPC866_et_al 1 # define CONFIG_MPC866_FAMILY 1
#elif defined(CONFIG_MPC870) \ #elif defined(CONFIG_MPC870) \
|| defined(CONFIG_MPC875) \ || defined(CONFIG_MPC875) \
|| defined(CONFIG_MPC880) \ || defined(CONFIG_MPC880) \
|| defined(CONFIG_MPC885) || defined(CONFIG_MPC885)
# define CONFIG_DUET 1 # define CONFIG_MPC885_FAMILY 1
#endif #endif
#if defined(CONFIG_MPC860) \ #if defined(CONFIG_MPC860) \
|| defined(CONFIG_MPC860T) \ || defined(CONFIG_MPC860T) \
|| defined(CONFIG_MPC866_et_al) \ || defined(CONFIG_MPC866_FAMILY) \
|| defined(CONFIG_DUET) || defined(CONFIG_MPC885_FAMILY)
# define CONFIG_MPC86x 1 # define CONFIG_MPC86x 1
#endif #endif
#elif defined(CONFIG_5xx) #elif defined(CONFIG_5xx)

View File

@ -743,7 +743,8 @@ typedef struct scc_enet {
#endif /* CONFIG_SCC1_ETHERNET */ #endif /* CONFIG_SCC1_ETHERNET */
/* /*
* This ENET stuff is for the MPC860TFADS/MPC86xADS/DUET with ethernet on FEC. * This ENET stuff is for the MPC860TFADS/MPC86xADS/MPC885ADS
* with ethernet on FEC.
*/ */
#ifdef CONFIG_FEC_ENET #ifdef CONFIG_FEC_ENET

View File

@ -26,15 +26,17 @@
#define CONFIG_BAUDRATE 38400 /* Console baudrate */ #define CONFIG_BAUDRATE 38400 /* Console baudrate */
/* CFG_8XX_FACT * CFG_8XX_XIN = 50 MHz */
#if 0 #if 0
#define CFG_8XX_XIN 32768 /* 32.768 kHz input frequency */ #define CFG_8XX_FACT 1526 /* 32.768 kHz crystal on XTAL/EXTAL */
#define CFG_8XX_FACT 0x5F6 /* Multiply by 1526 */
#else #else
#define CFG_8XX_XIN 4000000 /* 4 MHz input frequency */ #define CFG_8XX_FACT 12 /* 4 MHz oscillator on EXTCLK */
#define CFG_8XX_FACT 12 /* Multiply by 12 */
#endif #endif
#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
#define CONFIG_DRAM_50MHZ 1
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
| CFG_CMD_DHCP \ | CFG_CMD_DHCP \
| CFG_CMD_IMMAP \ | CFG_CMD_IMMAP \
@ -42,13 +44,9 @@
| CFG_CMD_PING \ | CFG_CMD_PING \
) )
#define CONFIG_DRAM_50MHZ 1
#include "fads.h" #include "fads.h"
#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
#define CFG_PC_IDE_RESET ((ushort)0x0008) /* PC 12 */ #define CFG_PC_IDE_RESET ((ushort)0x0008) /* PC 12 */
#endif /* __CONFIG_H */ #endif /* __CONFIG_H */

View File

@ -27,21 +27,19 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#if 0 /* old FADS */ #if 0 /* old FADS */
# define CFG_8XX_FACT 12 /* Multiply by 12 */ # define CFG_8XX_FACT 12 /* 4 MHz oscillator on EXTCLK */
# define CFG_8XX_XIN 4000000 /* 4 MHz in */
#else /* new FADS */ #else /* new FADS */
# define CFG_8XX_FACT 10 /* Multiply by 10 */ # define CFG_8XX_FACT 10 /* 5 MHz oscillator on EXTCLK */
# define CFG_8XX_XIN 5000000 /* 5 MHz in */
#endif #endif
#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
#define CONFIG_DRAM_50MHZ 1 #define CONFIG_DRAM_50MHZ 1
#define CONFIG_SDRAM_50MHZ 1 #define CONFIG_SDRAM_50MHZ 1
#include "fads.h" #include "fads.h"
#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
#ifdef USE_REAL_FLASH_VALUES #ifdef USE_REAL_FLASH_VALUES
/* /*
* These values fit our FADS860T ... * These values fit our FADS860T ...
@ -53,6 +51,6 @@
#define CFG_BR0_PRELIM 0x02800001 /* Real values for the board */ #define CFG_BR0_PRELIM 0x02800001 /* Real values for the board */
#endif #endif
#define CFG_DAUGHTERBOARD /* FADS has processor-specfic daughterboard */ #define CFG_DAUGHTERBOARD /* FADS has processor-specific daughterboard */
#endif /* __CONFIG_H */ #endif /* __CONFIG_H */

View File

@ -33,19 +33,14 @@
#undef CONFIG_8xx_CONS_NONE #undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 38400 #define CONFIG_BAUDRATE 38400
# define CFG_8XX_FACT 5 /* Multiply by 5 */ #define CONFIG_8xx_OSCLK 10000000 /* 10MHz oscillator on EXTCLK */
# define CFG_8XX_XIN 10000000 /* 10 MHz in */
#define CONFIG_DRAM_50MHZ 1 #define CONFIG_DRAM_50MHZ 1
#define CONFIG_SDRAM_50MHZ 1 #define CONFIG_SDRAM_50MHZ 1
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register 14-22
*-----------------------------------------------------------------------
* set the PLL, the low-power modes and the reset control
*/
#define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS)
#include "fads.h" #include "fads.h"
#define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */
#define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V)
#endif /* __CONFIG_H */ #endif /* __CONFIG_H */

View File

@ -11,7 +11,7 @@
#define __CONFIG_H #define __CONFIG_H
/* Board type */ /* Board type */
#define CONFIG_DUET_ADS 1 /* Duet (MPC87x/88x) ADS */ #define CONFIG_MPC885ADS 1 /* Duet (MPC87x/88x) ADS */
#define CONFIG_FADS 1 /* We are FADS compatible (more or less) */ #define CONFIG_FADS 1 /* We are FADS compatible (more or less) */
#define CONFIG_MPC885 1 /* MPC885 CPU (Duet family) */ #define CONFIG_MPC885 1 /* MPC885 CPU (Duet family) */
@ -21,33 +21,25 @@
#undef CONFIG_8xx_CONS_NONE #undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 38400 #define CONFIG_BAUDRATE 38400
#define CFG_8XX_FACT 5 /* Multiply by 5 */ #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */
#define CFG_8XX_XIN 10000000 /* 10 MHz in */
#define CFG_PLPRCR ((1 << PLPRCR_MFD_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS)
#define CONFIG_SDRAM_50MHZ 1 #define CONFIG_SDRAM_50MHZ 1
/*----------------------------------------------------------------------- #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
* PLPRCR - PLL, Low-Power, and Reset Control Register 14-22 | CFG_CMD_DHCP \
*----------------------------------------------------------------------- | CFG_CMD_IMMAP \
* set the PLL, the low-power modes and the reset control | CFG_CMD_MII \
*/ | CFG_CMD_PING \
#define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS) )
#include "fads.h" #include "fads.h"
#define CFG_PHYDEV_ADDR (BCSR_ADDR + 0x20000) #undef CFG_SCCR
#define CFG_SCCR (SCCR_TBS|SCCR_EBDF11)
#define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */ #define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */
#define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V) #define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V)
#define BCSR5 (CFG_PHYDEV_ADDR + 0x300)
#define BCSR5_MII2_EN 0x40
#define BCSR5_MII2_RST 0x20
#define BCSR5_T1_RST 0x10
#define BCSR5_ATM155_RST 0x08
#define BCSR5_ATM25_RST 0x04
#define BCSR5_MII1_EN 0x02
#define BCSR5_MII1_RST 0x01
#endif /* __CONFIG_H */ #endif /* __CONFIG_H */