Merge with git://www.denx.de/git/u-boot.git

CHANGELOG

@@ -1,3 +1,239 @@
+commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Mar 21 23:26:15 2007 +0100
+
+    Code cleanup. Update CHANGELOG
+
+commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Mar 21 14:54:29 2007 +0100
+
+    ppc4xx: Fix file mode of include/configs/acadia.h
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d5f4614c9350d9333e575100fb250aab774d0258
+Author: Markus Klotzbuecher <mk@denx.de>
+Date:	Wed Mar 21 14:41:46 2007 +0100
+
+    SPC1920: fix small clock routing bug
+
+    Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Mar 21 13:39:57 2007 +0100
+
+    [PATCH] Add AMCC Acadia (405EZ) eval board support
+
+    This patch adds support for the new AMCC Acadia eval board.
+
+    Please note that this Acadia/405EZ support is still in a beta stage.
+    Still lot's of cleanup needed but we need a preliminary release now.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e01bd218b00af73499331a1a701625a852cd286f
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Mar 21 13:38:59 2007 +0100
+
+    [PATCH] Add AMCC PPC405EZ support
+
+    This patch adds support for the new AMCC 405EZ PPC. It is in
+    preparation for the AMCC Acadia board support.
+
+    Please note that this Acadia/405EZ support is still in a beta stage.
+    Still lot's of cleanup needed but we need a preliminary release now.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date:	Wed Mar 21 08:45:17 2007 +0100
+
+    [PATCH] TQM8272: dont change the bits given from the HRCW
+		     for the SIUMCR and BCR Register.
+		     Fix the calculation for the EEprom Size
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 654589873dbafcf104dff133ce0d03a4506e9cc3
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Tue Mar 20 18:16:24 2007 +0800
+
+    [Blackfin][PATCH] Add BF561 EZKIT board support
+
+commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Mon Mar 19 22:55:58 2007 +0800
+
+    [Blackfin][PATCH] minor cleanup
+
+commit 389b6bb50f745bf5038ce030300d8a8512e96f79
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Mar 19 13:10:08 2007 +0100
+
+    Remove obsoleted POST files.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Mon Mar 19 01:26:11 2007 +0800
+
+    [PATCH] Add flash chip M29W320ET/B support
+
+commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Mon Mar 19 01:24:52 2007 +0800
+
+    [Blackfin][PATCH] Add BF537 stamp board support
+
+commit 8423e5e31a7235d05a482627315fb11d49c17bd7
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Mar 16 21:11:42 2007 +0100
+
+    [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
+
+    Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
+    DDR memory are dynamically programmed matching the total size
+    of the equipped memory (DIMM modules).
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 76d1466f918b881cda2d259254761e73885093c2
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Mar 13 13:38:05 2007 +0100
+
+    [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
+	    boards in terms of unification.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Mar 13 16:05:55 2007 +0100
+
+    Make SC3 board build with 'make O='; use 'addcons' consistently
+    (SC3 and Jupiter used to use 'addcon' instead).
+
+    Signed-off-by: Wolfgang Denk wd@denx.de
+
+commit 8502e30a28e492c756ea2d7df0ace026388fce4b
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date:	Tue Mar 13 09:40:59 2007 +0100
+
+    [PATCH] update board config for jupiter Board:
+	    added Hush Shell,
+		  CONFIG_CMDLINE_EDITING,
+		  CFG_ENV_ADDR_REDUND activated
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Mon Mar 12 12:11:55 2007 +0800
+
+    [Blackfin][PATCH] minor cleanup
+
+commit bfa5754a58477ac917d21527cd0f079d87cf188e
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Mon Mar 12 01:42:06 2007 +0800
+
+    [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
+
+commit 8440bb14581a294375c34b91b42512f9753d1130
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Mon Mar 12 00:25:14 2007 +0800
+
+    [Blackfin][PATCH] code cleanup
+
+commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date:	Sat Mar 10 23:49:29 2007 +0800
+
+    [Blackfin][PATCH] code cleanup
+
+commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
+Author: Aubrey.Li <aubrey.adi@gmail.com>
+Date:	Fri Mar 9 13:40:56 2007 +0800
+
+    [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
+
+commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
+Author: Aubrey.Li <aubrey.adi@gmail.com>
+Date:	Fri Mar 9 13:38:44 2007 +0800
+
+    [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
+
+commit 992423ab43c2bcf6b704853bd00af77450915e20
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu Mar 8 23:00:08 2007 +0100
+
+    ppc4xx: Fix file mode of sequoia.c
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit eb92f613556800f7483666db09d9a237ad911d4a
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:	Thu Mar 8 22:52:51 2007 +0100
+
+    Minor cleanup.
+
+commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
+Author: John Otken john@softadvances.com <john@softadvances.com>
+Date:	Thu Mar 8 09:39:48 2007 -0600
+
+    ppc4xx: Clear Sequoia/Rainier security engine reset bits
+
+    Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
+
+commit 650a330dd2539130c8c324791e2f9f75aed79d4e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Thu Mar 8 16:26:52 2007 +0100
+
+    [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit d9fc703246840c4b268debf48c334ba55c597dc0
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Thu Mar 8 16:25:47 2007 +0100
+
+    [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit ced5b9029043397348cdc88e0cfcd6b1f629250b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Thu Mar 8 16:23:11 2007 +0100
+
+    [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Thu Mar 8 16:20:32 2007 +0100
+
+    [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit f9fc6a5852a6335840882fa2111925010eea1abe
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Wed Mar 7 15:32:01 2007 +0100
+
+    fixed ethernet phy configuration for plu405 board
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 769104c9356594deb2092e204a39c05b33202d6c
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:	Thu Mar 8 21:49:27 2007 +0100
+
+    Minor cleanup
+
 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
 Author: Stefan Roese <sr@denx.de>
 Date:	Thu Mar 8 10:13:16 2007 +0100
@@ -122,6 +358,347 @@ Date:	Tue Mar 6 07:47:04 2007 +0100
 
     Signed-off-by: Stefan Roese <sr@denx.de>
 
+commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date:	Wed Feb 28 00:02:04 2007 -0600
+
+    mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
+
+    (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
+
+commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Feb 27 23:51:42 2007 -0600
+
+    mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
+
+    The config value for:
+    * CFG_ACR_PIPE_DEP
+    * CFG_ACR_RPTCNT
+    * CFG_SPCR_TSEC1EP
+    * CFG_SPCR_TSEC2EP
+    * CFG_SCCR_TSEC1CM
+    * CFG_SCCR_TSEC2CM
+
+    Were not being used when setting the appropriate register
+
+    Added:
+    * CFG_SCCR_USBMPHCM
+    * CFG_SCCR_USBDRCM
+    * CFG_SCCR_PCICM
+    * CFG_SCCR_ENCCM
+
+    To allow full config of the SCCR.
+
+    Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
+    that were just bogus.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d51b3cf371cd441030460ef19d36b2924c361b1a
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date:	Thu Feb 22 20:06:57 2007 -0600
+
+    mpc83xx: update [local-]mac-address properties on UEC based devices
+
+    8360 and 832x weren't updating their [local-]mac-address
+    properties. This patch fixes that.
+
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 61f4f912acbe60776c5e00df1ec94094ce672957
+Author: Timur Tabi <timur@freescale.com>
+Date:	Tue Feb 13 10:41:42 2007 -0600
+
+    mpc83xx: write MAC address to mac-address and local-mac-address
+
+    Some device trees have a mac-address property, some have local-mac-address,
+    and some have both.  To support all of these device trees, this patch
+    updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
+    This function already updates local-mac-address.
+
+    Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 22d71a71f57fd5d38b27ac3848e50d790360a598
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date:	Tue Feb 27 18:41:08 2007 -0600
+
+    mpc83xx: add command line editing by default
+
+commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date:	Wed Feb 14 19:50:53 2007 -0600
+
+    mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
+
+    Disable G1TXCLK, G2TXCLK h/w buffers. This patch
+    fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
+
+    Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
+
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+    Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
+
+commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
+Author: Xie Xiaobo <r63061@freescale.com>
+Date:	Wed Feb 14 18:27:17 2007 +0800
+
+    mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
+
+    The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
+    it pass DDR/DDR2 compliance tests.
+
+    Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
+
+commit b110f40bd180c6b560276589beedf753e97c46ce
+Author: Xie Xiaobo <r63061@freescale.com>
+Date:	Wed Feb 14 18:27:06 2007 +0800
+
+    mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
+
+    MPC8360E rev2.0 have new spridr,and PVR value,
+    The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
+
+    Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
+
+commit 8d172c0f0d85998a256a95b7459a5403a30380ed
+Author: Xie Xiaobo <r63061@freescale.com>
+Date:	Wed Feb 14 18:26:44 2007 +0800
+
+    mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
+
+    MPC8349E rev3.1 have new spridr,and PVR value,
+    The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
+
+    Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
+
+commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
+Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
+Date:	Wed Jan 31 11:04:19 2007 +0100
+
+    mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
+
+    Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
+    which is used to se if an slave will ACK after receiving its address.
+
+    Correct i2c probing to use this method as the old method could upset
+    a slave as it wrote a data byte to it.
+
+    Add a small delay in i2c_init() to let the controller
+    shutdown any ongoing I2C activity.
+
+    Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
+Author: Timur Tabi <timur@freescale.com>
+Date:	Wed Jan 31 15:54:29 2007 -0600
+
+    mpc83xx: Add support for the MPC8349E-mITX-GP
+
+    Add support for the MPC8349E-mITX-GP, a stripped-down version of the
+    MPC8349E-mITX.  Bonus features include support for low-boot (BMS bit in
+    HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
+
+    Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit fab16807adad350f618024350c6950165c247c72
+Author: Timur Tabi <timur@freescale.com>
+Date:	Wed Jan 31 15:54:20 2007 -0600
+
+    mpc83xx: Delete sdram_init() for MPC8349E-mITX
+
+    There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
+    never does anything.  This patch deletes it.
+
+    Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Fri Jan 19 10:43:26 2007 +0800
+
+    mpc83xx: Fix the LAW1/3 bug
+
+    The patch solves the alignment problem of the local bus access windows to
+    render accessible the memory bank and PHY registers of UPC 1 (starting at
+    0xf801 0000). What we actually did was to adjust the sizes of the bus
+    access windows so that the base address alignment requirement would be met.
+
+    Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
+    Signed-off-by: Gridish Shlomi <gridish@freescale.com>
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 97c4b397dce236a7318b304667bf89e59d08b17c
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date:	Tue Jan 30 16:15:31 2007 -0600
+
+    mpc83xx: don't hang if watchdog configured on 8360, 832x
+
+    don't hang if watchdog configured on 8360, 832x
+
+    The watchdog programming model is the same across all 83xx devices;
+    make the code reflect that.
+
+commit b70047478570e371ce7223be342ce98afea0f7d6
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date:	Tue Jan 30 16:15:21 2007 -0600
+
+    mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
+
+    protect memcpy to bad address if a local-mac-address is missing from dt
+
+commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date:	Tue Jan 30 16:15:04 2007 -0600
+
+    mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
+
+    make 8360 default environment fdt be 8360 (not 8349)
+
+commit a28899c910024a0226331df07207b1038c300c93
+Author: Emilian Medve <Emilian.Medve@freescale.com>
+Date:	Tue Jan 30 16:14:50 2007 -0600
+
+    mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
+
+    The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
+    be used for busy-waiting since it strips the 'volatile' property from
+    the bd variable. gcc3 was working by pure luck.
+
+    This is a follow on patch to "Fix the UEC driver bug of QE"
+
+commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Jan 30 14:08:30 2007 -0600
+
+    mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
+
+    The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
+    MPC834X class processors.  Change the protections from CONFIG_MPC8349 to
+    CONFIG_MPC834X so they are more generic.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date:	Thu Jan 25 13:40:55 2007 -0600
+
+    mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
+
+commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date:	Wed Jan 24 17:18:37 2007 -0600
+
+    mpc83xx: sort Makefile targets
+
+    reordered targets alphabetically
+
+commit 91e25769771c1164ed63ffca0add49f934ae3343
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date:	Tue Jan 16 11:38:14 2007 -0500
+
+    mpc83xx: U-Boot support for Wind River SBC8349
+
+    I've redone the SBC8349 support to match git-current, which
+    incorporates all the MPC834x updates from Freescale since the 1.1.6
+    release,  including the DDR changes.
+
+    I've kept all the SBC8349 files as parallel as possible to the
+    MPC8349EMDS ones for ease of maintenance and to allow for easy
+    inspection of what was changed to support this board.  Hence the SBC8349
+    U-Boot has FDT support and everything else that the MPC8349EMDS has.
+
+    Fortunately the Freescale updates added support for boards using CS0,
+    but I had to change spd_sdram.c to allow for board specific settings for
+    the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
+    default if the board doesn't specify a value.)
+
+    Hopefully this should be mergeable as-is and require no whitespace
+    cleanups or similar, but if something doesn't measure up then let me
+    know and I'll fix it.
+
+    Thanks,
+    Paul.
+
+commit 05031db456ab227f3e3752f37b9b812b65bb83ad
+Author: Sam Song <samsongshu@yahoo.com.cn>
+Date:	Thu Dec 14 19:03:21 2006 +0800
+
+    mpc83xx: Remove a redundant semicolon in mpc8349itx.c
+
+    A redundant semicolon existed in mpc8349itx.c
+    should be removed.
+
+    Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
+
+commit f35f358241c549be3f75cfe2eaa642914275b7ba
+Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
+Date:	Wed Dec 6 21:23:55 2006 -0500
+
+    mpc83xx: Put the version (and magic) after the HRCW.
+
+    Put the version (and magic) after the HRCW.  This puts it in a fixed
+    location in flash, not at the start of flash but as close as we can get.
+
+    Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
+
+commit 48aecd969171a6e99a55fae04933857787f9a5bd
+Author: Dave Liu <r63238@freescale.com>
+Date:	Thu Dec 7 21:14:51 2006 +0800
+
+    mpc83xx: Add the MPC832XEMDS board readme
+
+    Add the MPC832XEMDS board readme
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 24c3aca3f1358b113d3215adb5433b156e99f72b
+Author: Dave Liu <r63238@freescale.com>
+Date:	Thu Dec 7 21:13:15 2006 +0800
+
+    mpc83xx: Add support for the MPC832XEMDS board
+
+    This patch supports DUART, ETH3/4 and PCI etc.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit e080313c32322e15ab5a18eb896a252858c57284
+Author: Dave Liu <r63238@freescale.com>
+Date:	Thu Dec 7 21:11:58 2006 +0800
+
+    mpc83xx: streamline the 83xx immr head file
+
+    For better format and style, I streamlined the 83xx head files,
+    including immap_83xx.h and mpc83xx.h. In the old head files, 1)
+    duplicated macro definition appear in the both files; 2) the structure
+    of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
+    macro definition put inside the each structure. So, I cleaned up the
+    structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
+    moved the macro definition to mpc83xx.h, Just like MPC8260.
+
+    CHANGELOG
+
+    *streamline the 83xx immr head file
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
+Author: Dave Liu <r63238@freescale.com>
+Date:	Wed Dec 6 11:38:17 2006 +0800
+
+    mpc83xx: Fix the UEC driver bug of QE
+
+    The patch prevents the GCC tool chain from striping useful code for
+    optimization. It will make UEC ethernet driver workable, Otherwise the
+    UEC will fail in tx when you are using gcc4.x. but the driver can work
+    when using gcc3.4.3.
+
+    CHANGELOG
+
+    *Prevent the GCC from striping code for optimization, Otherwise the UEC
+    will tx failed when you are using gcc4.x.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
 Author: Stefan Roese <sr@denx.de>
 Date:	Thu Mar 1 21:11:36 2007 +0100
@@ -1204,6 +1781,14 @@ Date:	Tue Nov 28 11:04:45 2006 +0100
 
     Signed-off-by: Stefan Roese <sr@denx.de>
 
+commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Nov 28 11:04:45 2006 +0100
+
+    [PATCH] nand: Fix patch merge problem
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
 Author: Wolfgang Denk <wd@pollux.denx.de>
 Date:	Mon Nov 27 22:53:53 2006 +0100

MAKEALL

@@ -312,6 +312,14 @@ LIST_coldfire="	\
 
 LIST_avr32="atstk1002"
 
+#########################################################################
+## Blackfin Systems
+#########################################################################
+
+LIST_blackfin=" \
+	bf533-ezkit	bf533-stamp	bf537-stamp	bf561-ezkit	\
+"
+
 #-----------------------------------------------------------------------
 
 #----- for now, just run PPC by default -----
@@ -338,14 +346,15 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
+	arm|SA|ARM7|ARM9|ARM10|ARM11|ixp|pxa| \
-	arm|SA|ARM7|ARM9|ARM10|ARM11|pxa|ixp| \
+	avr32| \
+	blackfin| \
+	coldfire| \
 	microblaze| \
 	mips|mips_el| \
 	nios|nios2| \
-	x86|I486| \
+	ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
-	coldfire| \
+	x86|I486)
-	avr32)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}

Makefile

@@ -146,7 +146,7 @@ ifeq ($(ARCH),microblaze)
 CROSS_COMPILE = mb-
 endif
 ifeq ($(ARCH),blackfin)
-CROSS_COMPILE = bfin-elf-
+CROSS_COMPILE = bfin-uclinux-
 endif
 ifeq ($(ARCH),avr32)
 CROSS_COMPILE = avr32-
@@ -178,7 +178,15 @@ OBJS += cpu/$(CPU)/resetvec.o
 endif
 ifeq ($(CPU),bf533)
 OBJS += cpu/$(CPU)/start1.o	cpu/$(CPU)/interrupt.o	cpu/$(CPU)/cache.o
-OBJS += cpu/$(CPU)/cplbhdlr.o	cpu/$(CPU)/cplbmgr.o	cpu/$(CPU)/flush.o
+OBJS += cpu/$(CPU)/flush.o	cpu/$(CPU)/init_sdram.o
+endif
+ifeq ($(CPU),bf537)
+OBJS += cpu/$(CPU)/start1.o	cpu/$(CPU)/interrupt.o	cpu/$(CPU)/cache.o
+OBJS += cpu/$(CPU)/flush.o	cpu/$(CPU)/init_sdram.o
+endif
+ifeq ($(CPU),bf561)
+OBJS += cpu/$(CPU)/start1.o	cpu/$(CPU)/interrupt.o	cpu/$(CPU)/cache.o
+OBJS += cpu/$(CPU)/flush.o 	cpu/$(CPU)/init_sdram.o
 endif
 
 OBJS := $(addprefix $(obj),$(OBJS))
@@ -2341,14 +2349,17 @@ suzaku_config:	unconfig
 #########################################################################
 ## Blackfin
 #########################################################################
-ezkit533_config	:	unconfig
+bf533-ezkit_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) blackfin bf533 ezkit533
+	@$(MKCONFIG) $(@:_config=) blackfin bf533 bf533-ezkit
 
-stamp_config	:	unconfig
+bf533-stamp_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) blackfin bf533 stamp
+	@$(MKCONFIG) $(@:_config=) blackfin bf533 bf533-stamp
 
-dspstamp_config	:	unconfig
+bf537-stamp_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) blackfin bf533 dsp_stamp
+	@$(MKCONFIG) $(@:_config=) blackfin bf537 bf537-stamp
+
+bf561-ezkit_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) blackfin bf561 bf561-ezkit
 
 #========================================================================
 # AVR32
@@ -2385,6 +2396,8 @@ clean:
 	rm -f $(obj)board/netstar/*.srec $(obj)board/netstar/*.bin
 	rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom
 	rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds
+	rm -f $(obj)board/bf533-ezkit/u-boot.lds $(obj)board/bf533-stamp/u-boot.lds
+	rm -f $(obj)board/bf537-stamp/u-boot.lds $(obj)board/bf561-ezkit/u-boot.lds
 	rm -f $(obj)include/bmp_logo.h
 	rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map
 

blackfin_config.mk

@@ -21,4 +21,4 @@
 # MA 02111-1307 USA
 #
 
-PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN -D__blackfin__
+PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN

board/amcc/acadia/Makefile

@@ -23,25 +23,29 @@
 
 include $(TOPDIR)/config.mk
 
-LIB	= lib$(BOARD).a
+LIB	= $(obj)lib$(BOARD).a
 
-OBJS	= $(BOARD).o cpr.o memory.o
+COBJS	= $(BOARD).o cpr.o memory.o
 SOBJS	=
 
-$(LIB):	$(OBJS) $(SOBJS)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-	$(AR) crv $@ $(OBJS) $(SOBJS)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
 
 clean:
 	rm -f $(SOBJS) $(OBJS)
 
 distclean:	clean
-	rm -f $(LIB) core *.bak .depend
+	rm -f $(LIB) core *.bak .depend *~
 
 #########################################################################
 
-.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+# defines $(obj).depend target
-		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+include $(SRCTREE)/rules.mk
 
-sinclude .depend
+sinclude $(obj).depend
 
 #########################################################################

board/amcc/acadia/config.mk

@@ -21,8 +21,6 @@
 # MA 02111-1307 USA
 #
 
-sinclude $(TOPDIR)/board/amcc/liveoak/config.tmp
-
 ifndef TEXT_BASE
 TEXT_BASE = 0xFFFC0000
 endif

board/bf533-ezkit/Makefile

@@ -1,7 +1,7 @@
 #
 # U-boot - Makefile
 #
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2007 Analog Device Inc.
 #
 # (C) Copyright 2000-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -25,41 +25,28 @@
 # MA 02111-1307 USA
 #
 
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
 include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o stamp.o
+COBJS	:= $(BOARD).o flash.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS)
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
-	$(AR) $(ARFLAGS) $@ $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp
+	mv -f $@.tmp $@
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
 
 #########################################################################
 

board/bf533-ezkit/bf533-ezkit.c

@@ -30,24 +30,28 @@
 #include "psd4256.h"
 #endif
 
-DECLARE_GLOBAL_DATA_PTR;
-
 int checkboard(void)
 {
+#if (BFIN_CPU == ADSP_BF531)
+	printf("CPU:   ADSP BF531 Rev.: 0.%d\n", *pCHIPID >> 28);
+#elif (BFIN_CPU == ADSP_BF532)
+	printf("CPU:   ADSP BF532 Rev.: 0.%d\n", *pCHIPID >> 28);
+#else
 	printf("CPU:   ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
+#endif
 	printf("Board: ADI BF533 EZ-Kit Lite board\n");
 	printf("       Support: http://blackfin.uclinux.org/\n");
-	printf("       Richard Klingler <richard@uclinux.net>\n");
 	return 0;
 }
 
 long int initdram(int board_type)
 {
+	DECLARE_GLOBAL_DATA_PTR;
 #ifdef DEBUG
 	int brate;
 	char *tmp = getenv("baudrate");
 	brate = simple_strtoul(tmp, NULL, 16);
-	printf("Serial Port initialized with Baud rate = %x\n",brate);
+	printf("Serial Port initialized with Baud rate = %x\n", brate);
 	printf("SDRAM attributes:\n");
 	printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
 	       "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
@@ -64,9 +68,13 @@ long int initdram(int board_type)
 /* miscellaneous platform dependent initialisations */
 int misc_init_r(void)
 {
-	/* Set direction bits for Video en/decoder reset as output	*/
+	/* Set direction bits for Video en/decoder reset as output      */
-	*(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DIR) = PSDA_VDEC_RST | PSDA_VENC_RST;
+	*(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DIR) =
-	/* Deactivate Video en/decoder reset lines			*/
+	    PSDA_VDEC_RST | PSDA_VENC_RST;
-	*(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DOUT) = PSDA_VDEC_RST | PSDA_VENC_RST;
+	/* Deactivate Video en/decoder reset lines                      */
+	*(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DOUT) =
+	    PSDA_VDEC_RST | PSDA_VENC_RST;
+
+	return 0;
 }
 #endif

board/bf533-ezkit/config.mk

@@ -20,6 +20,6 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-
+# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes
+#  256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h
 TEXT_BASE = 0x01FC0000
-PLATFORM_CPPFLAGS += -I$(TOPDIR)

board/bf533-ezkit/flash-defines.h

@@ -52,17 +52,13 @@
 #define CFG_FLASH0_BASE		0x20000000
 #define RESET_VAL		0xF0
 
-
-asm("#define FLASH_START_L 0x0000");
-asm("#define FLASH_START_H 0x2000");
-
 flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 
 int get_codes(void);
 int poll_toggle_bit(long lOffset);
 void reset_flash(void);
 int erase_flash(void);
-int erase_block_flash(int,unsigned long);
+int erase_block_flash(int, unsigned long);
 void unlock_flash(long lOffset);
 int write_data(long lStart, long lCount, long lStride, int *pnData);
 int FillData(long lStart, long lCount, long lStride, int *pnData);

board/bf533-ezkit/flash.c

@@ -26,6 +26,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm/io.h>
 #include "flash-defines.h"
 
 void flash_reset(void)
@@ -33,14 +34,13 @@ void flash_reset(void)
 	reset_flash();
 }
 
-unsigned long flash_get_size(ulong baseaddr, flash_info_t * info,
+unsigned long flash_get_size(ulong baseaddr, flash_info_t * info, int bank_flag)
-			     int bank_flag)
 {
 	int id = 0, i = 0;
 	static int FlagDev = 1;
 
 	id = get_codes();
-	if(FlagDev)	{
+	if (FlagDev) {
 #ifdef DEBUG
 		printf("Device ID of the Flash is %x\n", id);
 #endif
@@ -100,10 +100,11 @@ unsigned long flash_init(void)
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
 		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0 >> 20);
+		       size_b0, size_b0 >> 20);
 	}
 
-	(void)flash_protect(FLAG_PROTECT_SET,CFG_FLASH0_BASE,(flash_info[0].start[2] - 1),&flash_info[0]);
+	(void)flash_protect(FLAG_PROTECT_SET, CFG_FLASH0_BASE,
+			    (flash_info[0].start[2] - 1), &flash_info[0]);
 
 	return (size_b0 + size_b1 + size_b2);
 }
@@ -122,15 +123,14 @@ void flash_print_info(flash_info_t * info)
 		printf("ST Microelectronics ");
 		break;
 	default:
-		printf("Unknown Vendor ");
+		printf("Unknown Vendor: (0x%08X) ", info->flash_id);
 		break;
 	}
 	for (i = 0; i < info->sector_count; ++i) {
 		if ((i % 5) == 0)
 			printf("\n   ");
 		printf(" %08lX%s",
-			info->start[i],
+		       info->start[i], info->protect[i] ? " (RO)" : "     ");
-			info->protect[i] ? " (RO)" : "     ");
 	}
 	printf("\n");
 	return;
@@ -138,8 +138,8 @@ void flash_print_info(flash_info_t * info)
 
 int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
-	int cnt = 0,i;
+	int cnt = 0, i;
-	int prot,sect;
+	int prot, sect;
 
 	prot = 0;
 	for (sect = s_first; sect <= s_last; ++sect) {
@@ -148,15 +148,16 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	}
 
 	if (prot)
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
 	else
-		printf ("\n");
+		printf("\n");
 
 	cnt = s_last - s_first + 1;
 
 	if (cnt == FLASH_TOT_SECT) {
 		printf("Erasing flash, Please Wait \n");
-		if(erase_flash() < 0) {
+		if (erase_flash() < 0) {
 			printf("Erasing flash failed \n");
 			return FLASH_FAIL;
 		}
@@ -164,7 +165,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 		printf("Erasing Flash locations, Please Wait\n");
 		for (i = s_first; i <= s_last; i++) {
 			if (info->protect[i] == 0) {	/* not protected */
-				if(erase_block_flash(i, info->start[i]) < 0) {
+				if (erase_block_flash(i, info->start[i]) < 0) {
 					printf("Error Sector erasing \n");
 					return FLASH_FAIL;
 				}
@@ -178,13 +179,12 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
 	int ret;
 
-	ret = write_data(addr, cnt, 1, (int *) src);
+	ret = write_data(addr, cnt, 1, (int *)src);
-	if(ret == FLASH_FAIL)
+	if (ret == FLASH_FAIL)
 		return ERR_NOT_ERASED;
 	return FLASH_SUCCESS;
 }
 
-
 int write_data(long lStart, long lCount, long lStride, int *pnData)
 {
 	long i = 0;
@@ -198,20 +198,23 @@ int write_data(long lStart, long lCount, long lStride, int *pnData)
 
 	for (i = 0; (i < lCount / 4) && (i < BUFFER_SIZE); i++) {
 		for (iShift = 0, j = 0; (j < iNumWords);
-			j++, ulOffset += (lStride * 2)) {
+		     j++, ulOffset += (lStride * 2)) {
 			if ((ulOffset >= INVALIDLOCNSTART)
-			&& (ulOffset < INVALIDLOCNEND)) {
+			    && (ulOffset < INVALIDLOCNEND)) {
-				printf("Invalid locations, Try writing to another location \n");
+				printf
+				    ("Invalid locations, Try writing to another location \n");
 				return FLASH_FAIL;
 			}
 			get_sector_number(ulOffset, &nSector);
-			read_flash(ulOffset,&d);
+			read_flash(ulOffset, &d);
-			if(d != 0xffff) {
+			if (d != 0xffff) {
-				printf("Flash not erased at offset 0x%x Please erase to reprogram \n",ulOffset);
+				printf
+				    ("Flash not erased at offset 0x%x Please erase to reprogram \n",
+				     ulOffset);
 				return FLASH_FAIL;
 			}
 			unlock_flash(ulOffset);
-			if(write_flash(ulOffset, (pnData[i] >> iShift)) < 0) {
+			if (write_flash(ulOffset, (pnData[i] >> iShift)) < 0) {
 				printf("Error programming the flash \n");
 				return FLASH_FAIL;
 			}
@@ -220,17 +223,18 @@ int write_data(long lStart, long lCount, long lStride, int *pnData)
 	}
 	if (nLeftover > 0) {
 		if ((ulOffset >= INVALIDLOCNSTART)
-			&& (ulOffset < INVALIDLOCNEND))
+		    && (ulOffset < INVALIDLOCNEND))
-				return FLASH_FAIL;
+			return FLASH_FAIL;
 		get_sector_number(ulOffset, &nSector);
-		read_flash(ulOffset,&d);
+		read_flash(ulOffset, &d);
-		if(d != 0xffff) {
+		if (d != 0xffff) {
-			printf("Flash already programmed. Please erase to reprogram \n");
+			printf
-			printf("uloffset = 0x%x \t d = 0x%x\n",ulOffset,d);
+			    ("Flash already programmed. Please erase to reprogram \n");
+			printf("uloffset = 0x%x \t d = 0x%x\n", ulOffset, d);
 			return FLASH_FAIL;
 		}
 		unlock_flash(ulOffset);
-		if(write_flash(ulOffset, pnData[i]) < 0) {
+		if (write_flash(ulOffset, pnData[i]) < 0) {
 			printf("Error programming the flash \n");
 			return FLASH_FAIL;
 		}
@@ -252,8 +256,8 @@ int read_data(long ulStart, long lCount, long lStride, int *pnData)
 	for (i = 0; (i < lCount / 4) && (i < BUFFER_SIZE); i++) {
 		for (iShift = 0, j = 0; j < iNumWords; j += 2) {
 			if ((ulOffset >= INVALIDLOCNSTART)
-				&& (ulOffset < INVALIDLOCNEND))
+			    && (ulOffset < INVALIDLOCNEND))
-					return FLASH_FAIL;
+				return FLASH_FAIL;
 
 			get_sector_number(ulOffset, &nSector);
 			read_flash(ulOffset, &nLow);
@@ -265,8 +269,8 @@ int read_data(long ulStart, long lCount, long lStride, int *pnData)
 	}
 	if (nLeftover > 0) {
 		if ((ulOffset >= INVALIDLOCNSTART)
-			&& (ulOffset < INVALIDLOCNEND))
+		    && (ulOffset < INVALIDLOCNEND))
-				return FLASH_FAIL;
+			return FLASH_FAIL;
 
 		get_sector_number(ulOffset, &nSector);
 		read_flash(ulOffset, &pnData[i]);
@@ -279,10 +283,10 @@ int write_flash(long nOffset, int nValue)
 	long addr;
 
 	addr = (CFG_FLASH_BASE + nOffset);
-	asm("ssync;");
+	sync();
-	*(unsigned volatile short *) addr = nValue;
+	*(unsigned volatile short *)addr = nValue;
-	asm("ssync;");
+	sync();
-	if(poll_toggle_bit(nOffset) < 0)
+	if (poll_toggle_bit(nOffset) < 0)
 		return FLASH_FAIL;
 	return FLASH_SUCCESS;
 }
@@ -294,29 +298,30 @@ int read_flash(long nOffset, int *pnValue)
 
 	if (nOffset != 0x2)
 		reset_flash();
-	asm("ssync;");
+	sync();
-	nValue = *(volatile unsigned short *) addr;
+	nValue = *(volatile unsigned short *)addr;
-	asm("ssync;");
+	sync();
 	*pnValue = nValue;
 	return TRUE;
 }
 
 int poll_toggle_bit(long lOffset)
 {
-	unsigned int u1,u2;
+	unsigned int u1, u2;
 	unsigned long timeout = 0xFFFFFFFF;
-	volatile unsigned long *FB = (volatile unsigned long *)(0x20000000 + lOffset);
+	volatile unsigned long *FB =
-	while(1) {
+	    (volatile unsigned long *)(0x20000000 + lOffset);
-		if(timeout < 0)
+	while (1) {
+		if (timeout < 0)
 			break;
 		u1 = *(volatile unsigned short *)FB;
 		u2 = *(volatile unsigned short *)FB;
-		if((u1 & 0x0040) == (u2 & 0x0040))
+		if ((u1 & 0x0040) == (u2 & 0x0040))
 			return FLASH_SUCCESS;
-		if((u2 & 0x0020) == 0x0000)
+		if ((u2 & 0x0020) == 0x0000)
 			continue;
 		u1 = *(volatile unsigned short *)FB;
-		if((u2 & 0x0040) == (u1 & 0x0040))
+		if ((u2 & 0x0040) == (u1 & 0x0040))
 			return FLASH_SUCCESS;
 		else {
 			reset_flash();
@@ -325,7 +330,8 @@ int poll_toggle_bit(long lOffset)
 		timeout--;
 	}
 	printf("Time out occured \n");
-	if(timeout <0)	return FLASH_FAIL;
+	if (timeout < 0)
+		return FLASH_FAIL;
 }
 
 void reset_flash(void)
@@ -344,7 +350,7 @@ int erase_flash(void)
 	write_flash(WRITESEQ5, WRITEDATA5);
 	write_flash(WRITESEQ6, WRITEDATA6);
 
-	if(poll_toggle_bit(0x0000) < 0)
+	if (poll_toggle_bit(0x0000) < 0)
 		return FLASH_FAIL;
 
 	write_flash(SecFlashAOff + WRITESEQ1, WRITEDATA1);
@@ -354,7 +360,7 @@ int erase_flash(void)
 	write_flash(SecFlashAOff + WRITESEQ5, WRITEDATA5);
 	write_flash(SecFlashAOff + WRITESEQ6, WRITEDATA6);
 
-	if(poll_toggle_bit(SecFlashASec1Off) < 0)
+	if (poll_toggle_bit(SecFlashASec1Off) < 0)
 		return FLASH_FAIL;
 
 	write_flash(PriFlashBOff + WRITESEQ1, WRITEDATA1);
@@ -364,7 +370,7 @@ int erase_flash(void)
 	write_flash(PriFlashBOff + WRITESEQ5, WRITEDATA5);
 	write_flash(PriFlashBOff + WRITESEQ6, WRITEDATA6);
 
-	if(poll_toggle_bit(PriFlashBOff) <0)
+	if (poll_toggle_bit(PriFlashBOff) < 0)
 		return FLASH_FAIL;
 
 	write_flash(SecFlashBOff + WRITESEQ1, WRITEDATA1);
@@ -374,7 +380,7 @@ int erase_flash(void)
 	write_flash(SecFlashBOff + WRITESEQ5, WRITEDATA5);
 	write_flash(SecFlashBOff + WRITESEQ6, WRITEDATA6);
 
-	if(poll_toggle_bit(SecFlashBOff) < 0)
+	if (poll_toggle_bit(SecFlashBOff) < 0)
 		return FLASH_FAIL;
 
 	return FLASH_SUCCESS;
@@ -397,7 +403,7 @@ int erase_block_flash(int nBlock, unsigned long address)
 
 	write_flash(ulSectorOff, BlockEraseVal);
 
-	if(poll_toggle_bit(ulSectorOff) < 0)
+	if (poll_toggle_bit(ulSectorOff) < 0)
 		return FLASH_FAIL;
 
 	return FLASH_SUCCESS;
@@ -435,34 +441,34 @@ void get_sector_number(long ulOffset, int *pnSector)
 
 	if (ulOffset >= SecFlashAOff) {
 		if ((ulOffset < SecFlashASec1Off)
-			&& (ulOffset < SecFlashASec2Off)) {
+		    && (ulOffset < SecFlashASec2Off)) {
-				nSector = SECT32;
+			nSector = SECT32;
 		} else if ((ulOffset >= SecFlashASec2Off)
-			&& (ulOffset < SecFlashASec3Off)) {
+			   && (ulOffset < SecFlashASec3Off)) {
-				nSector = SECT33;
+			nSector = SECT33;
 		} else if ((ulOffset >= SecFlashASec3Off)
-			&& (ulOffset < SecFlashASec4Off)) {
+			   && (ulOffset < SecFlashASec4Off)) {
-				nSector = SECT34;
+			nSector = SECT34;
 		} else if ((ulOffset >= SecFlashASec4Off)
-			&& (ulOffset < SecFlashAEndOff)) {
+			   && (ulOffset < SecFlashAEndOff)) {
-				nSector = SECT35;
+			nSector = SECT35;
 		}
 	} else if (ulOffset >= SecFlashBOff) {
 		if ((ulOffset < SecFlashBSec1Off)
-			&& (ulOffset < SecFlashBSec2Off)) {
+		    && (ulOffset < SecFlashBSec2Off)) {
-				nSector = SECT36;
+			nSector = SECT36;
 		}
 		if ((ulOffset < SecFlashBSec2Off)
-			&& (ulOffset < SecFlashBSec3Off)) {
+		    && (ulOffset < SecFlashBSec3Off)) {
-				nSector = SECT37;
+			nSector = SECT37;
 		}
 		if ((ulOffset < SecFlashBSec3Off)
-			&& (ulOffset < SecFlashBSec4Off)) {
+		    && (ulOffset < SecFlashBSec4Off)) {
-				nSector = SECT38;
+			nSector = SECT38;
 		}
 		if ((ulOffset < SecFlashBSec4Off)
-			&& (ulOffset < SecFlashBEndOff)) {
+		    && (ulOffset < SecFlashBEndOff)) {
-				nSector = SECT39;
+			nSector = SECT39;
 		}
 	} else if ((ulOffset >= PriFlashAOff) && (ulOffset < SecFlashAOff)) {
 		nSector = ulOffset & 0xffff0000;

board/bf533-ezkit/psd4256.h

@@ -49,19 +49,19 @@
  * Flash A Port A Bit definitions
  */
 
-#define	PSDA_PPICLK1	0x20		/* PPI Clock select bit 1		*/
+#define	PSDA_PPICLK1	0x20	/* PPI Clock select bit 1               */
-#define	PSDA_PPICLK0	0x10		/* PPI Clock select bit 0		*/
+#define	PSDA_PPICLK0	0x10	/* PPI Clock select bit 0               */
-#define	PSDA_VDEC_RST	0x08		/* Video decoder reset, 0 = RESET	*/
+#define	PSDA_VDEC_RST	0x08	/* Video decoder reset, 0 = RESET       */
-#define	PSDA_VENC_RST	0x04		/* Video encoder reset, 0 = RESET	*/
+#define	PSDA_VENC_RST	0x04	/* Video encoder reset, 0 = RESET       */
-#define	PSDA_CODEC_RST	0x01		/* Codec reset, 0 = RESET		*/
+#define	PSDA_CODEC_RST	0x01	/* Codec reset, 0 = RESET               */
 
 /*
  * Flash A Port B Bit definitions
  */
 
-#define	PSDA_LED9	0x20		/* LED 9, 1 = LED ON			*/
+#define	PSDA_LED9	0x20	/* LED 9, 1 = LED ON                    */
-#define	PSDA_LED8	0x10		/* LED 8, 1 = LED ON			*/
+#define	PSDA_LED8	0x10	/* LED 8, 1 = LED ON                    */
-#define	PSDA_LED7	0x08		/* LED 7, 1 = LED ON			*/
+#define	PSDA_LED7	0x08	/* LED 7, 1 = LED ON                    */
-#define	PSDA_LED6	0x04		/* LED 6, 1 = LED ON			*/
+#define	PSDA_LED6	0x04	/* LED 6, 1 = LED ON                    */
-#define	PSDA_LED5	0x02		/* LED 5, 1 = LED ON			*/
+#define	PSDA_LED5	0x02	/* LED 5, 1 = LED ON                    */
-#define	PSDA_LED4	0x01		/* LED 4, 1 = LED ON			*/
+#define	PSDA_LED4	0x01	/* LED 4, 1 = LED ON                    */

board/bf533-ezkit/u-boot.lds.S

@@ -1,7 +1,7 @@
 /*
- * U-boot - u-boot.lds
+ * U-boot - u-boot.lds.S
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Device Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -25,6 +25,8 @@
  * MA 02111-1307 USA
  */
 
+#include <config.h>
+
 OUTPUT_ARCH(bfin)
 SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
 /* Do we need any of these for elf?
@@ -55,6 +57,7 @@ SECTIONS
   .rela.plt      : { *(.rela.plt)	}
   .init          : { *(.init)		}
   .plt : { *(.plt) }
+  . = CFG_MONITOR_BASE;
   .text      :
   {
     /* WARNING - the following is hand-optimized to fit within	*/
@@ -68,10 +71,11 @@ SECTIONS
     cpu/bf533/interrupt.o	(.text)
     cpu/bf533/serial.o		(.text)
     common/dlmalloc.o		(.text)
-    lib_generic/vsprintf.o	(.text)
+/*  lib_blackfin/bf533_string.o	(.text) */
+/*  lib_generic/vsprintf.o	(.text) */
     lib_generic/crc32.o		(.text)
     lib_generic/zlib.o		(.text)
-    board/ezkit533/ezkit533.o		(.text)
+    board/bf533-ezkit/bf533-ezkit.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
     common/environment.o	(.text)
@@ -119,9 +123,9 @@ SECTIONS
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
+  ___u_boot_cmd_start = .;
   .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+  ___u_boot_cmd_end = .;
 
 
   __start___ex_table = .;

board/bf533-stamp/Makefile

@@ -0,0 +1,58 @@
+#
+# U-boot - Makefile
+#
+# Copyright (c) 2007 Analog Device Inc.
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o spi.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp
+	mv -f $@.tmp $@
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/bf533-stamp/bf533-stamp.c

@@ -27,9 +27,8 @@
 
 #include <common.h>
 #include <asm/mem_init.h>
-#include "stamp.h"
+#include <asm/io.h>
-
+#include "bf533-stamp.h"
-DECLARE_GLOBAL_DATA_PTR;
 
 #define STATUS_LED_OFF 0
 #define STATUS_LED_ON  1
@@ -40,42 +39,45 @@ DECLARE_GLOBAL_DATA_PTR;
 # define SHOW_BOOT_PROGRESS(arg)
 #endif
 
-int checkboard (void)
+int checkboard(void)
 {
-	printf ("CPU:   ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
+#if (BFIN_CPU == ADSP_BF531)
-	printf ("Board: ADI BF533 Stamp board\n");
+	printf("CPU:   ADSP BF531 Rev.: 0.%d\n", *pCHIPID >> 28);
-	printf ("       Support: http://blackfin.uclinux.org/\n");
+#elif (BFIN_CPU == ADSP_BF532)
-	printf ("       Richard Klingler <richard@uclinux.net>\n");
+	printf("CPU:   ADSP BF532 Rev.: 0.%d\n", *pCHIPID >> 28);
+#else
+	printf("CPU:   ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
+#endif
+	printf("Board: ADI BF533 Stamp board\n");
+	printf("       Support: http://blackfin.uclinux.org/\n");
 	return 0;
 }
 
-long int initdram (int board_type)
+long int initdram(int board_type)
 {
+	DECLARE_GLOBAL_DATA_PTR;
 #ifdef DEBUG
-	printf ("SDRAM attributes:\n");
+	printf("SDRAM attributes:\n");
-	printf ("  tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; "
+	printf
-		"CAS Latency:%d cycles\n",
+	    ("  tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; "
-		(SDRAM_tRCD >> 15),
+	     "CAS Latency:%d cycles\n", (SDRAM_tRCD >> 15), (SDRAM_tRP >> 11),
-		(SDRAM_tRP >> 11),
+	     (SDRAM_tRAS >> 6), (SDRAM_tWR >> 19), (SDRAM_CL >> 2));
-		(SDRAM_tRAS >> 6),
+	printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
-		(SDRAM_tWR >> 19),
+	printf("Bank size = %d MB\n", 128);
-		(SDRAM_CL >> 2));
-	printf ("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
-	printf ("Bank size = %d MB\n", 128);
 #endif
 	gd->bd->bi_memstart = CFG_SDRAM_BASE;
 	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
 	return (gd->bd->bi_memsize);
 }
 
-void swap_to (int device_id)
+void swap_to(int device_id)
 {
 
 	if (device_id == ETHERNET) {
 		*pFIO_DIR = PF0;
-		asm ("ssync;");
+		sync();
 		*pFIO_FLAG_S = PF0;
-		asm ("ssync;");
+		sync();
 	} else if (device_id == FLASH) {
 		*pFIO_DIR = (PF4 | PF3 | PF2 | PF1 | PF0);
 		*pFIO_FLAG_S = (PF4 | PF3 | PF2);
@@ -85,9 +87,9 @@ void swap_to (int device_id)
 		*pFIO_EDGE = (PF8 | PF7 | PF6 | PF5);
 		*pFIO_INEN = (PF8 | PF7 | PF6 | PF5);
 		*pFIO_FLAG_D = (PF4 | PF3 | PF2);
-		asm ("ssync;");
+		sync();
 	} else {
-		printf ("Unknown bank to switch\n");
+		printf("Unknown bank to switch\n");
 	}
 
 	return;
@@ -95,7 +97,7 @@ void swap_to (int device_id)
 
 #if defined(CONFIG_MISC_INIT_R)
 /* miscellaneous platform dependent initialisations */
-int misc_init_r (void)
+int misc_init_r(void)
 {
 	int i;
 	int cf_stat = 0;
@@ -104,7 +106,7 @@ int misc_init_r (void)
 	*pFIO_EDGE = FIO_EDGE_CF_BITS;
 	*pFIO_POLAR = FIO_POLAR_CF_BITS;
 	for (i = 0; i < 0x300; i++)
-		asm ("nop;");
+		asm("nop;");
 
 	if ((*pFIO_FLAG_S) & CF_STAT_BITS) {
 		cf_stat = 0;
@@ -115,37 +117,36 @@ int misc_init_r (void)
 	*pFIO_EDGE = FIO_EDGE_BITS;
 	*pFIO_POLAR = FIO_POLAR_BITS;
 
-
 	if (cf_stat) {
-		printf ("Booting from COMPACT flash\n");
+		printf("Booting from COMPACT flash\n");
 
 		/* Set cycle time for CF */
-		*(volatile unsigned long *) ambctl1 = CF_AMBCTL1VAL;
+		*(volatile unsigned long *)ambctl1 = CF_AMBCTL1VAL;
 
 		for (i = 0; i < 0x1000; i++)
-			asm ("nop;");
+			asm("nop;");
 		for (i = 0; i < 0x1000; i++)
-			asm ("nop;");
+			asm("nop;");
 		for (i = 0; i < 0x1000; i++)
-			asm ("nop;");
+			asm("nop;");
 
-		serial_setbrg ();
+		serial_setbrg();
-		ide_init ();
+		ide_init();
 
-		setenv ("bootargs", "");
+		setenv("bootargs", "");
-		setenv ("bootcmd",
+		setenv("bootcmd",
-			"fatload ide 0:1 0x1000000 uImage-stamp;bootm 0x1000000;bootm 0x20100000");
+		       "fatload ide 0:1 0x1000000 uImage-stamp;bootm 0x1000000;bootm 0x20100000");
 	} else {
-		printf ("Booting from FLASH\n");
+		printf("Booting from FLASH\n");
 	}
 
-	return 1;
+	return 0;
 }
 #endif
 
 #ifdef CONFIG_STAMP_CF
 
-void cf_outb (unsigned char val, volatile unsigned char *addr)
+void cf_outb(unsigned char val, volatile unsigned char *addr)
 {
 	/*
 	 * Set PF1 PF0 respectively to 0 1 to divert address
@@ -153,70 +154,70 @@ void cf_outb (unsigned char val, volatile unsigned char *addr)
 	 */
 	*pFIO_FLAG_S = CF_PF0;
 	*pFIO_FLAG_C = CF_PF1;
-	asm ("ssync;");
+	sync();
 
 	*(addr) = val;
-	asm ("ssync;");
+	sync();
 
 	/* Setback PF1 PF0 to 0 0 to address external
 	 * memory banks  */
-	*(volatile unsigned short *) pFIO_FLAG_C = CF_PF1_PF0;
+	*(volatile unsigned short *)pFIO_FLAG_C = CF_PF1_PF0;
-	asm ("ssync;");
+	sync();
 }
 
-unsigned char cf_inb (volatile unsigned char *addr)
+unsigned char cf_inb(volatile unsigned char *addr)
 {
 	volatile unsigned char c;
 
 	*pFIO_FLAG_S = CF_PF0;
 	*pFIO_FLAG_C = CF_PF1;
-	asm ("ssync;");
+	sync();
 
 	c = *(addr);
-	asm ("ssync;");
+	sync();
 
 	*pFIO_FLAG_C = CF_PF1_PF0;
-	asm ("ssync;");
+	sync();
 
 	return c;
 }
 
-void cf_insw (unsigned short *sect_buf, unsigned short *addr, int words)
+void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words)
 {
 	int i;
 
 	*pFIO_FLAG_S = CF_PF0;
 	*pFIO_FLAG_C = CF_PF1;
-	asm ("ssync;");
+	sync();
 
 	for (i = 0; i < words; i++) {
 		*(sect_buf + i) = *(addr);
-		asm ("ssync;");
+		sync();
 	}
 
 	*pFIO_FLAG_C = CF_PF1_PF0;
-	asm ("ssync;");
+	sync();
 }
 
-void cf_outsw (unsigned short *addr, unsigned short *sect_buf, int words)
+void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
 {
 	int i;
 
 	*pFIO_FLAG_S = CF_PF0;
 	*pFIO_FLAG_C = CF_PF1;
-	asm ("ssync;");
+	sync();
 
 	for (i = 0; i < words; i++) {
 		*(addr) = *(sect_buf + i);
-		asm ("ssync;");
+		sync();
 	}
 
 	*pFIO_FLAG_C = CF_PF1_PF0;
-	asm ("ssync;");
+	sync();
 }
 #endif
 
-void stamp_led_set (int LED1, int LED2, int LED3)
+void stamp_led_set(int LED1, int LED2, int LED3)
 {
 	*pFIO_INEN &= ~(PF2 | PF3 | PF4);
 	*pFIO_DIR |= (PF2 | PF3 | PF4);
@@ -233,31 +234,31 @@ void stamp_led_set (int LED1, int LED2, int LED3)
 		*pFIO_FLAG_S = PF4;
 	else
 		*pFIO_FLAG_C = PF4;
-	asm ("ssync;");
+	sync();
 }
 
-void show_boot_progress (int status)
+void show_boot_progress(int status)
 {
 	switch (status) {
 	case 1:
-		stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_ON);
+		stamp_led_set(STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_ON);
 		break;
 	case 2:
-		stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_OFF);
+		stamp_led_set(STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_OFF);
 		break;
 	case 3:
-		stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_ON);
+		stamp_led_set(STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_ON);
 		break;
 	case 4:
-		stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_OFF);
+		stamp_led_set(STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_OFF);
 		break;
 	case 5:
 	case 6:
-		stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_ON);
+		stamp_led_set(STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_ON);
 		break;
 	case 7:
 	case 8:
-		stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_OFF);
+		stamp_led_set(STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_OFF);
 		break;
 	case 9:
 	case 10:
@@ -266,11 +267,10 @@ void show_boot_progress (int status)
 	case 13:
 	case 14:
 	case 15:
-		stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF,
+		stamp_led_set(STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_OFF);
-			       STATUS_LED_OFF);
 		break;
 	default:
-		stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_ON);
+		stamp_led_set(STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_ON);
 		break;
 	}
 }

board/bf533-stamp/bf533-stamp.h

@@ -36,7 +36,6 @@ extern volatile unsigned long *amgctl;
 
 extern unsigned long pll_div_fact;
 extern void serial_setbrg(void);
-extern void pll_set(int vco, int crystal_frq, int pll_div);
 
 /* Definitions used in  Compact Flash Boot support */
 #define FIO_EDGE_CF_BITS 	0x0000

board/bf533-stamp/config.mk

@@ -20,6 +20,6 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-
+# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes
+#  256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h
 TEXT_BASE = 0x07FC0000
-PLATFORM_CPPFLAGS += -I$(TOPDIR)

board/bf533-stamp/spi.c

@@ -0,0 +1,473 @@
+/****************************************************************************
+ *  SPI flash driver for M25P64
+ ****************************************************************************/
+#include <common.h>
+#include <linux/ctype.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_SPI)
+
+ /*Application definitions */
+
+#define	NUM_SECTORS 	128	/* number of sectors */
+#define SECTOR_SIZE		0x10000
+#define NOP_NUM		1000
+
+#define COMMON_SPI_SETTINGS (SPE|MSTR|CPHA|CPOL)	/*Settings to the SPI_CTL */
+#define TIMOD01 (0x01)		/*stes the SPI to work with core instructions */
+
+ /*Flash commands */
+#define SPI_WREN	(0x06)	/*Set Write Enable Latch */
+#define SPI_WRDI	(0x04)	/*Reset Write Enable Latch */
+#define SPI_RDSR	(0x05)	/*Read Status Register */
+#define SPI_WRSR	(0x01)	/*Write Status Register */
+#define SPI_READ	(0x03)	/*Read data from memory */
+#define SPI_PP  	(0x02)	/*Program Data into memory */
+#define SPI_SE  	(0xD8)	/*Erase one sector in memory */
+#define SPI_BE		(0xC7)	/*Erase all memory */
+#define WIP		(0x1)	/*Check the write in progress bit of the SPI status register */
+#define WEL		(0x2)	/*Check the write enable bit of the SPI status register */
+
+#define TIMEOUT 350000000
+
+typedef enum {
+	NO_ERR,
+	POLL_TIMEOUT,
+	INVALID_SECTOR,
+	INVALID_BLOCK,
+} ERROR_CODE;
+
+void spi_init_f(void);
+void spi_init_r(void);
+ssize_t spi_read(uchar *, int, uchar *, int);
+ssize_t spi_write(uchar *, int, uchar *, int);
+
+char ReadStatusRegister(void);
+void Wait_For_SPIF(void);
+void SetupSPI(const int spi_setting);
+void SPI_OFF(void);
+void SendSingleCommand(const int iCommand);
+
+ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector);
+ERROR_CODE EraseBlock(int nBlock);
+ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData);
+ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData);
+ERROR_CODE Wait_For_Status(char Statusbit);
+ERROR_CODE Wait_For_WEL(void);
+
+/* -------------------
+ * Variables
+ * ------------------- */
+
+/* **************************************************************************
+ *
+ *  Function:    spi_init_f
+ *
+ *  Description: Init SPI-Controller (ROM part)
+ *
+ *  return:      ---
+ *
+ * *********************************************************************** */
+void spi_init_f(void)
+{
+}
+
+/* **************************************************************************
+ *
+ *  Function:    spi_init_r
+ *
+ *  Description: Init SPI-Controller (RAM part) -
+ *		 The malloc engine is ready and we can move our buffers to
+ *		 normal RAM
+ *
+ *  return:      ---
+ *
+ * *********************************************************************** */
+void spi_init_r(void)
+{
+	return;
+}
+
+/****************************************************************************
+ *  Function:    spi_write
+ **************************************************************************** */
+ssize_t spi_write(uchar * addr, int alen, uchar * buffer, int len)
+{
+	unsigned long offset;
+	int start_block, end_block;
+	int start_byte, end_byte;
+	ERROR_CODE result = NO_ERR;
+	uchar temp[SECTOR_SIZE];
+	int i, num;
+
+	offset = addr[0] << 16 | addr[1] << 8 | addr[2];
+	/* Get the start block number */
+	result = GetSectorNumber(offset, &start_block);
+	if (result == INVALID_SECTOR) {
+		printf("Invalid sector! ");
+		return 0;
+	}
+	/* Get the end block number */
+	result = GetSectorNumber(offset + len - 1, &end_block);
+	if (result == INVALID_SECTOR) {
+		printf("Invalid sector! ");
+		return 0;
+	}
+
+	for (num = start_block; num <= end_block; num++) {
+		ReadData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp);
+		start_byte = num * SECTOR_SIZE;
+		end_byte = (num + 1) * SECTOR_SIZE - 1;
+		if (start_byte < offset)
+			start_byte = offset;
+		if (end_byte > (offset + len))
+			end_byte = (offset + len - 1);
+		for (i = start_byte; i <= end_byte; i++)
+			temp[i - num * SECTOR_SIZE] = buffer[i - offset];
+		EraseBlock(num);
+		result = WriteData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp);
+		if (result != NO_ERR)
+			return 0;
+		printf(".");
+	}
+	return len;
+}
+
+/****************************************************************************
+ *  Function:    spi_read
+ **************************************************************************** */
+ssize_t spi_read(uchar * addr, int alen, uchar * buffer, int len)
+{
+	unsigned long offset;
+	offset = addr[0] << 16 | addr[1] << 8 | addr[2];
+	ReadData(offset, len, (int *)buffer);
+	return len;
+}
+
+void SendSingleCommand(const int iCommand)
+{
+	unsigned short dummy;
+
+	/*turns on the SPI in single write mode */
+	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
+
+	/*sends the actual command to the SPI TX register */
+	*pSPI_TDBR = iCommand;
+	sync();
+
+	/*The SPI status register will be polled to check the SPIF bit */
+	Wait_For_SPIF();
+
+	dummy = *pSPI_RDBR;
+
+	/*The SPI will be turned off */
+	SPI_OFF();
+
+}
+
+void SetupSPI(const int spi_setting)
+{
+
+	if (icache_status() || dcache_status())
+		udelay(CONFIG_CCLK_HZ / 50000000);
+	/*sets up the PF2 to be the slave select of the SPI */
+	*pSPI_FLG = 0xFB04;
+	*pSPI_BAUD = CONFIG_SPI_BAUD;
+	*pSPI_CTL = spi_setting;
+	sync();
+}
+
+void SPI_OFF(void)
+{
+
+	*pSPI_CTL = 0x0400;	/* disable SPI */
+	*pSPI_FLG = 0;
+	*pSPI_BAUD = 0;
+	sync();
+	udelay(CONFIG_CCLK_HZ / 50000000);
+
+}
+
+void Wait_For_SPIF(void)
+{
+	unsigned short dummyread;
+	while ((*pSPI_STAT & TXS)) ;
+	while (!(*pSPI_STAT & SPIF)) ;
+	while (!(*pSPI_STAT & RXS)) ;
+	dummyread = *pSPI_RDBR;	/* Read dummy to empty the receive register      */
+
+}
+
+ERROR_CODE Wait_For_WEL(void)
+{
+	int i;
+	char status_register = 0;
+	ERROR_CODE ErrorCode = NO_ERR;	/* tells us if there was an error erasing flash */
+
+	for (i = 0; i < TIMEOUT; i++) {
+		status_register = ReadStatusRegister();
+		if ((status_register & WEL)) {
+			ErrorCode = NO_ERR;	/* tells us if there was an error erasing flash */
+			break;
+		}
+		ErrorCode = POLL_TIMEOUT;	/* Time out error */
+	};
+
+	return ErrorCode;
+}
+
+ERROR_CODE Wait_For_Status(char Statusbit)
+{
+	int i;
+	char status_register = 0xFF;
+	ERROR_CODE ErrorCode = NO_ERR;	/* tells us if there was an error erasing flash */
+
+	for (i = 0; i < TIMEOUT; i++) {
+		status_register = ReadStatusRegister();
+		if (!(status_register & Statusbit)) {
+			ErrorCode = NO_ERR;	/* tells us if there was an error erasing flash */
+			break;
+		}
+		ErrorCode = POLL_TIMEOUT;	/* Time out error */
+	};
+
+	return ErrorCode;
+}
+
+char ReadStatusRegister(void)
+{
+	char status_register = 0;
+
+	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));	/* Turn on the SPI */
+
+	*pSPI_TDBR = SPI_RDSR;	/* send instruction to read status register */
+	sync();
+	Wait_For_SPIF();	/*wait until the instruction has been sent */
+	*pSPI_TDBR = 0;		/*send dummy to receive the status register */
+	sync();
+	Wait_For_SPIF();	/*wait until the data has been sent */
+	status_register = *pSPI_RDBR;	/*read the status register */
+
+	SPI_OFF();		/* Turn off the SPI */
+
+	return status_register;
+}
+
+ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector)
+{
+	int nSector = 0;
+	ERROR_CODE ErrorCode = NO_ERR;
+
+	if (ulOffset > (NUM_SECTORS * 0x10000 - 1)) {
+		ErrorCode = INVALID_SECTOR;
+		return ErrorCode;
+	}
+
+	nSector = (int)ulOffset / 0x10000;
+	*pnSector = nSector;
+
+	/* ok */
+	return ErrorCode;
+}
+
+ERROR_CODE EraseBlock(int nBlock)
+{
+	unsigned long ulSectorOff = 0x0, ShiftValue;
+	ERROR_CODE ErrorCode = NO_ERR;
+
+	/* if the block is invalid just return */
+	if ((nBlock < 0) || (nBlock > NUM_SECTORS)) {
+		ErrorCode = INVALID_BLOCK;	/* tells us if there was an error erasing flash */
+		return ErrorCode;
+	}
+	/* figure out the offset of the block in flash */
+	if ((nBlock >= 0) && (nBlock < NUM_SECTORS)) {
+		ulSectorOff = (nBlock * SECTOR_SIZE);
+
+	} else {
+		ErrorCode = INVALID_BLOCK;	/* tells us if there was an error erasing flash */
+		return ErrorCode;
+	}
+
+	/* A write enable instruction must previously have been executed */
+	SendSingleCommand(SPI_WREN);
+
+	/*The status register will be polled to check the write enable latch "WREN" */
+	ErrorCode = Wait_For_WEL();
+
+	if (POLL_TIMEOUT == ErrorCode) {
+		printf("SPI Erase block error\n");
+		return ErrorCode;
+	} else
+		/*Turn on the SPI to send single commands */
+		SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
+
+	/* Send the erase block command to the flash followed by the 24 address  */
+	/* to point to the start of a sector. */
+	*pSPI_TDBR = SPI_SE;
+	sync();
+	Wait_For_SPIF();
+	ShiftValue = (ulSectorOff >> 16);	/* Send the highest byte of the 24 bit address at first */
+	*pSPI_TDBR = ShiftValue;
+	sync();
+	Wait_For_SPIF();	/* Wait until the instruction has been sent */
+	ShiftValue = (ulSectorOff >> 8);	/* Send the middle byte of the 24 bit address  at second */
+	*pSPI_TDBR = ShiftValue;
+	sync();
+	Wait_For_SPIF();	/* Wait until the instruction has been sent */
+	*pSPI_TDBR = ulSectorOff;	/* Send the lowest byte of the 24 bit address finally */
+	sync();
+	Wait_For_SPIF();	/* Wait until the instruction has been sent */
+
+	/*Turns off the SPI */
+	SPI_OFF();
+
+	/* Poll the status register to check the Write in Progress bit */
+	/* Sector erase takes time */
+	ErrorCode = Wait_For_Status(WIP);
+
+	/* block erase should be complete */
+	return ErrorCode;
+}
+
+/*****************************************************************************
+* ERROR_CODE ReadData()
+*
+* Read a value from flash for verify purpose
+*
+* Inputs:	unsigned long ulStart - holds the SPI start address
+*			int pnData - pointer to store value read from flash
+*			long lCount - number of elements to read
+***************************************************************************** */
+ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData)
+{
+	unsigned long ShiftValue;
+	char *cnData;
+	int i;
+
+	cnData = (char *)pnData;	/* Pointer cast to be able to increment byte wise */
+
+	/* Start SPI interface   */
+	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
+
+	*pSPI_TDBR = SPI_READ;	/* Send the read command to SPI device */
+	sync();
+	Wait_For_SPIF();	/* Wait until the instruction has been sent */
+	ShiftValue = (ulStart >> 16);	/* Send the highest byte of the 24 bit address at first */
+	*pSPI_TDBR = ShiftValue;	/* Send the byte to the SPI device */
+	sync();
+	Wait_For_SPIF();	/* Wait until the instruction has been sent */
+	ShiftValue = (ulStart >> 8);	/* Send the middle byte of the 24 bit address  at second */
+	*pSPI_TDBR = ShiftValue;	/* Send the byte to the SPI device */
+	sync();
+	Wait_For_SPIF();	/* Wait until the instruction has been sent */
+	*pSPI_TDBR = ulStart;	/* Send the lowest byte of the 24 bit address finally */
+	sync();
+	Wait_For_SPIF();	/* Wait until the instruction has been sent */
+
+	/* After the SPI device address has been placed on the MOSI pin the data can be */
+	/* received on the MISO pin. */
+	for (i = 0; i < lCount; i++) {
+		*pSPI_TDBR = 0;	/*send dummy */
+		sync();
+		while (!(*pSPI_STAT & RXS)) ;
+		*cnData++ = *pSPI_RDBR;	/*read  */
+
+		if ((i >= SECTOR_SIZE) && (i % SECTOR_SIZE == 0))
+			printf(".");
+	}
+
+	SPI_OFF();		/* Turn off the SPI */
+
+	return NO_ERR;
+}
+
+ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount,
+		      int *iDataSource, long *lWriteCount)
+{
+
+	unsigned long ulWAddr;
+	long lWTransferCount = 0;
+	int i;
+	char iData;
+	char *temp = (char *)iDataSource;
+	ERROR_CODE ErrorCode = NO_ERR;	/* tells us if there was an error erasing flash */
+
+	/* First, a Write Enable Command must be sent to the SPI. */
+	SendSingleCommand(SPI_WREN);
+
+	/* Second, the SPI Status Register will be tested whether the  */
+	/*         Write Enable Bit has been set.  */
+	ErrorCode = Wait_For_WEL();
+	if (POLL_TIMEOUT == ErrorCode) {
+		printf("SPI Write Time Out\n");
+		return ErrorCode;
+	} else
+		/* Third, the 24 bit address will be shifted out the SPI MOSI bytewise. */
+		SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));	/* Turns the SPI on */
+	*pSPI_TDBR = SPI_PP;
+	sync();
+	Wait_For_SPIF();	/*wait until the instruction has been sent */
+	ulWAddr = (ulStartAddr >> 16);
+	*pSPI_TDBR = ulWAddr;
+	sync();
+	Wait_For_SPIF();	/*wait until the instruction has been sent */
+	ulWAddr = (ulStartAddr >> 8);
+	*pSPI_TDBR = ulWAddr;
+	sync();
+	Wait_For_SPIF();	/*wait until the instruction has been sent */
+	ulWAddr = ulStartAddr;
+	*pSPI_TDBR = ulWAddr;
+	sync();
+	Wait_For_SPIF();	/*wait until the instruction has been sent */
+	/* Fourth, maximum number of 256 bytes will be taken from the Buffer */
+	/* and sent to the SPI device. */
+	for (i = 0; (i < lTransferCount) && (i < 256); i++, lWTransferCount++) {
+		iData = *temp;
+		*pSPI_TDBR = iData;
+		sync();
+		Wait_For_SPIF();	/*wait until the instruction has been sent */
+		temp++;
+	}
+
+	SPI_OFF();		/* Turns the SPI off */
+
+	/* Sixth, the SPI Write in Progress Bit must be toggled to ensure the  */
+	/* programming is done before start of next transfer. */
+	ErrorCode = Wait_For_Status(WIP);
+
+	if (POLL_TIMEOUT == ErrorCode) {
+		printf("SPI Program Time out!\n");
+		return ErrorCode;
+	} else
+
+		*lWriteCount = lWTransferCount;
+
+	return ErrorCode;
+}
+
+ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData)
+{
+
+	unsigned long ulWStart = ulStart;
+	long lWCount = lCount, lWriteCount;
+	long *pnWriteCount = &lWriteCount;
+
+	ERROR_CODE ErrorCode = NO_ERR;
+
+	while (lWCount != 0) {
+		ErrorCode = WriteFlash(ulWStart, lWCount, pnData, pnWriteCount);
+
+		/* After each function call of WriteFlash the counter must be adjusted */
+		lWCount -= *pnWriteCount;
+
+		/* Also, both address pointers must be recalculated. */
+		ulWStart += *pnWriteCount;
+		pnData += *pnWriteCount / 4;
+	}
+
+	/* return the appropriate error code */
+	return ErrorCode;
+}
+
+#endif				/* CONFIG_SPI */

board/bf533-stamp/u-boot.lds.S

@@ -1,7 +1,7 @@
 /*
- * U-boot - u-boot.lds
+ * U-boot - u-boot.lds.S
  *
- * Copyright (c) 2005 blackfin.uclinux.org
+ * Copyright (c) 2005-2007 Analog Device Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -25,6 +25,8 @@
  * MA 02111-1307 USA
  */
 
+#include <config.h>
+
 OUTPUT_ARCH(bfin)
 SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
 /* Do we need any of these for elf?
@@ -55,6 +57,7 @@ SECTIONS
   .rela.plt      : { *(.rela.plt)	}
   .init          : { *(.init)		}
   .plt : { *(.plt) }
+  . = CFG_MONITOR_BASE;
   .text      :
   {
     /* WARNING - the following is hand-optimized to fit within	*/
@@ -68,9 +71,11 @@ SECTIONS
     cpu/bf533/interrupt.o	(.text)
     cpu/bf533/serial.o		(.text)
     common/dlmalloc.o		(.text)
-    lib_generic/vsprintf.o	(.text)
+/*  lib_blackfin/bf533_string.o	(.text)	*/
+/*  lib_generic/vsprintf.o	(.text) */
     lib_generic/crc32.o		(.text)
-    lib_generic/zlib.o		(.text)
+/*  lib_generic/zlib.o		(.text) */
+/*  board/stamp/stamp.o		(.text) */
 
     . = DEFINED(env_offset) ? env_offset : .;
     common/environment.o	(.text)
@@ -118,9 +123,9 @@ SECTIONS
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
+  ___u_boot_cmd_start = .;
   .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+  ___u_boot_cmd_end = .;
 
 
   __start___ex_table = .;

board/bf537-stamp/Makefile

@@ -0,0 +1,58 @@
+#
+# U-boot - Makefile
+#
+# Copyright (c) 2005-2007 Analog Device Inc.
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o flash.o ether_bf537.o post-memory.o stm_m25p64.o cmd_bf537led.o nand.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp
+	mv -f $@.tmp $@
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/bf537-stamp/bf537-stamp.c

@@ -0,0 +1,437 @@
+/*
+ * U-boot - BF537.c
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <asm/blackfin.h>
+#include <asm/io.h>
+#include "ether_bf537.h"
+
+#define POST_WORD_ADDR 0xFF903FFC
+
+/*
+ * the bootldr command loads an address, checks to see if there
+ *   is a Boot stream that the on-chip BOOTROM can understand,
+ *   and loads it via the BOOTROM Callback. It is possible
+ *   to also add booting from SPI, or TWI, but this function does
+ *   not currently support that.
+ */
+int do_bootldr(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	ulong addr, entry;
+	ulong *data;
+
+	/* Get the address */
+	if (argc < 2) {
+		addr = load_addr;
+	} else {
+		addr = simple_strtoul(argv[1], NULL, 16);
+	}
+
+	/* Check if it is a LDR file */
+	data = (ulong *) addr;
+	if (*data == 0xFF800060 || *data == 0xFF800040 || *data == 0xFF800020) {
+		/* We want to boot from FLASH or SDRAM */
+		entry = _BOOTROM_BOOT_DXE_FLASH;
+		printf("## Booting ldr image at 0x%08lx ...\n", addr);
+		if (icache_status())
+			icache_disable();
+		if (dcache_status())
+			dcache_disable();
+
+	      __asm__("R7=%[a];\n" "P0=%[b];\n" "JUMP (P0);\n":
+	      :[a] "d"(addr),[b] "a"(entry)
+	      :"R7", "P0");
+
+	} else {
+		printf("## No ldr image at address 0x%08lx\n", addr);
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(bootldr, 2, 0, do_bootldr,
+	   "bootldr - boot ldr image from memory\n",
+	   "[addr]\n         - boot ldr image stored in memory\n");
+
+int checkboard(void)
+{
+#if (BFIN_CPU == ADSP_BF534)
+	printf("CPU:   ADSP BF534 Rev.: 0.%d\n", *pCHIPID >> 28);
+#elif (BFIN_CPU == ADSP_BF536)
+	printf("CPU:   ADSP BF536 Rev.: 0.%d\n", *pCHIPID >> 28);
+#else
+	printf("CPU:   ADSP BF537 Rev.: 0.%d\n", *pCHIPID >> 28);
+#endif
+	printf("Board: ADI BF537 stamp board\n");
+	printf("       Support: http://blackfin.uclinux.org/\n");
+	return 0;
+}
+
+#if defined(CONFIG_BFIN_IDE)
+
+void cf_outb(unsigned char val, volatile unsigned char *addr)
+{
+	*(addr) = val;
+	sync();
+}
+
+unsigned char cf_inb(volatile unsigned char *addr)
+{
+	volatile unsigned char c;
+
+	c = *(addr);
+	sync();
+
+	return c;
+}
+
+void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words)
+{
+	int i;
+
+	for (i = 0; i < words; i++)
+		*(sect_buf + i) = *(addr);
+	sync();
+}
+
+void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
+{
+	int i;
+
+	for (i = 0; i < words; i++)
+		*(addr) = *(sect_buf + i);
+	sync();
+}
+#endif				/* CONFIG_BFIN_IDE */
+
+long int initdram(int board_type)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+#ifdef DEBUG
+	int brate;
+	char *tmp = getenv("baudrate");
+	brate = simple_strtoul(tmp, NULL, 16);
+	printf("Serial Port initialized with Baud rate = %x\n", brate);
+	printf("SDRAM attributes:\n");
+	printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
+	       "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
+	       3, 3, 6, 2, 3);
+	printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
+	printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
+#endif
+	gd->bd->bi_memstart = CFG_SDRAM_BASE;
+	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
+	return CFG_MAX_RAM_SIZE;
+}
+
+#if defined(CONFIG_MISC_INIT_R)
+/* miscellaneous platform dependent initialisations */
+int misc_init_r(void)
+{
+#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
+	char nid[32];
+	unsigned char *pMACaddr = (unsigned char *)0x203F0000;
+	u8 SrcAddr[6] = { 0x02, 0x80, 0xAD, 0x20, 0x31, 0xB8 };
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+	/* The 0xFF check here is to make sure we don't use the address
+	 * in flash if it's simply been erased (aka all 0xFF values) */
+	if (getenv("ethaddr") == NULL && is_valid_ether_addr(pMACaddr)) {
+		sprintf(nid, "%02x:%02x:%02x:%02x:%02x:%02x",
+			pMACaddr[0], pMACaddr[1],
+			pMACaddr[2], pMACaddr[3], pMACaddr[4], pMACaddr[5]);
+		setenv("ethaddr", nid);
+	}
+	if (getenv("ethaddr")) {
+		SetupMacAddr(SrcAddr);
+	}
+#endif				/* CONFIG_COMMANDS & CFG_CMD_NET */
+#endif				/* BFIN_BOOT_MODE == BF537_BYPASS_BOOT */
+
+#if defined(CONFIG_BFIN_IDE)
+#if defined(CONFIG_BFIN_TRUE_IDE)
+	/* Enable ATASEL when in True IDE mode */
+	printf("Using CF True IDE Mode\n");
+	cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_ENA);
+	udelay(1000);
+#elif defined(CONFIG_BFIN_CF_IDE)
+	/* Disable ATASEL when we're in Common Memory Mode */
+	printf("Using CF Common Memory Mode\n");
+	cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_DIS);
+	udelay(1000);
+#elif defined(CONFIG_BFIN_HDD_IDE)
+	printf("Using HDD IDE Mode\n");
+#endif
+	ide_init();
+#endif				/* CONFIG_BFIN_IDE */
+	return 0;
+}
+#endif				/* CONFIG_MISC_INIT_R */
+
+#ifdef CONFIG_POST
+#if (BFIN_BOOT_MODE != BF537_BYPASS_BOOT)
+/* Using sw10-PF5 as the hotkey */
+int post_hotkeys_pressed(void)
+{
+	return 0;
+}
+#else
+/* Using sw10-PF5 as the hotkey */
+int post_hotkeys_pressed(void)
+{
+	int delay = 3;
+	int i;
+	unsigned short value;
+
+	*pPORTF_FER &= ~PF5;
+	*pPORTFIO_DIR &= ~PF5;
+	*pPORTFIO_INEN |= PF5;
+
+	printf("########Press SW10 to enter Memory POST########: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF5;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	printf("\b\b\b 0");
+	printf("\n");
+	if (value == 0)
+		return 0;
+	else {
+		printf("Hotkey has been pressed, Enter POST . . . . . .\n");
+		return 1;
+	}
+}
+#endif
+#endif
+
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+void post_word_store(ulong a)
+{
+	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
+	*save_addr = a;
+}
+
+ulong post_word_load(void)
+{
+	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
+	return *save_addr;
+}
+#endif
+
+#ifdef CONFIG_POST
+int uart_post_test(int flags)
+{
+	return 0;
+}
+
+#define BLOCK_SIZE 0x10000
+#define VERIFY_ADDR 0x2000000
+extern int erase_block_flash(int);
+extern int write_data(long lStart, long lCount, uchar * pnData);
+int flash_post_test(int flags)
+{
+	unsigned short *pbuf, *temp;
+	int offset, n, i;
+	int value = 0;
+	int result = 0;
+	printf("\n");
+	pbuf = (unsigned short *)VERIFY_ADDR;
+	temp = pbuf;
+	for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) {
+		offset = (n - 7) * BLOCK_SIZE;
+		printf("--------Erase   block:%2d..", n);
+		erase_block_flash(n);
+		printf("OK\r");
+		printf("--------Program block:%2d...", n);
+		write_data(CFG_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
+		printf("OK\r");
+		printf("--------Verify  block:%2d...", n);
+		for (i = 0; i < BLOCK_SIZE; i += 2) {
+			if (*(unsigned short *)(CFG_FLASH_BASE + offset + i) !=
+			    *temp++) {
+				value = 1;
+				result = 1;
+			}
+		}
+		if (value)
+			printf("failed\n");
+		else
+			printf("OK		%3d%%\r",
+			       (int)(
+				     (n + 1 -
+				      FLASH_START_POST_BLOCK) *
+				     100 / (FLASH_END_POST_BLOCK -
+					    FLASH_START_POST_BLOCK)));
+
+		temp = pbuf;
+		value = 0;
+	}
+	printf("\n");
+	if (result)
+		return -1;
+	else
+		return 0;
+}
+
+/****************************************************
+ * LED1 ---- PF6	LED2 ---- PF7		    *
+ * LED3 ---- PF8	LED4 ---- PF9		    *
+ * LED5 ---- PF10	LED6 ---- PF11		    *
+ ****************************************************/
+int led_post_test(int flags)
+{
+	*pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
+	*pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11;
+	*pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
+	*pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
+	udelay(1000000);
+	printf("LED1 on");
+	*pPORTFIO |= PF6;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("LED2 on");
+	*pPORTFIO |= PF7;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("LED3 on");
+	*pPORTFIO |= PF8;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("LED4 on");
+	*pPORTFIO |= PF9;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("LED5 on");
+	*pPORTFIO |= PF10;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("lED6 on");
+	*pPORTFIO |= PF11;
+	printf("\b\b\b\b\b\b\b ");
+	return 0;
+}
+
+/************************************************
+ *  SW10 ---- PF5	SW11 ---- PF4		*
+ *  SW12 ---- PF3	SW13 ---- PF2		*
+ ************************************************/
+int button_post_test(int flags)
+{
+	int i, delay = 5;
+	unsigned short value = 0;
+	int result = 0;
+
+	*pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2);
+	*pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2);
+	*pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2);
+
+	printf("\n--------Press SW10: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF5;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	if (value != 0)
+		printf("\b\bOK");
+	else {
+		result = -1;
+		printf("\b\bfailed");
+	}
+
+	delay = 5;
+	printf("\n--------Press SW11: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF4;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	if (value != 0)
+		printf("\b\bOK");
+	else {
+		result = -1;
+		printf("\b\bfailed");
+	}
+
+	delay = 5;
+	printf("\n--------Press SW12: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF3;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	if (value != 0)
+		printf("\b\bOK");
+	else {
+		result = -1;
+		printf("\b\bfailed");
+	}
+
+	delay = 5;
+	printf("\n--------Press SW13: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF2;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	if (value != 0)
+		printf("\b\bOK");
+	else {
+		result = -1;
+		printf("\b\bfailed");
+	}
+	printf("\n");
+	return result;
+}
+#endif

board/bf537-stamp/cmd_bf537led.c

@@ -0,0 +1,201 @@
+/*
+ * U-boot - cmd_bf537led.c
+ *
+ * Copyright (C) 2006 Aaron Gage, Ocean Optics Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <asm/blackfin.h>
+#include <asm-blackfin/string.h>
+#ifdef CONFIG_BF537_STAMP_LEDCMD
+
+/* Define the command usage in a reusable way */
+#define USAGE_LONG \
+	"led <number> <action>\n" \
+	"    <number>  - Index (0-5) of LED to change, or \"all\"\n" \
+	"    <action>  - Must be one of:\n" \
+	"		on off toggle\n"
+
+/* Number of LEDs supported by the board */
+#define NUMBER_LEDS     6
+/* The BF537 stamp has 6 LEDs.  This mask indicates that all should be lit. */
+#define LED_ALL_MASK    0x003F
+
+void show_cmd_usage(void);
+void set_led_state(int index, int state);
+void configure_GPIO_to_output(int index);
+
+/* Map of LEDs according to their GPIO ports.  This can be rearranged or
+ * otherwise changed to account for different GPIO configurations.
+ */
+int led_ports[] = { PF6, PF7, PF8, PF9, PF10, PF11 };
+
+#define ACTION_TOGGLE   -1
+#define ACTION_OFF      0
+#define ACTION_ON       1
+
+#define LED_STATE_OFF   0
+#define LED_STATE_ON    1
+
+/* This is a trivial atoi implementation since we don't have one available */
+int atoi(char *string)
+{
+	int length;
+	int retval = 0;
+	int i;
+	int sign = 1;
+
+	length = strlen(string);
+	for (i = 0; i < length; i++) {
+		if (0 == i && string[0] == '-') {
+			sign = -1;
+			continue;
+		}
+		if (string[i] > '9' || string[i] < '0') {
+			break;
+		}
+		retval *= 10;
+		retval += string[i] - '0';
+	}
+	retval *= sign;
+	return retval;
+}
+
+int do_bf537led(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	int led_mask = 0;
+	int led_current_state = 0;
+	int action = ACTION_OFF;
+	int temp;
+
+	if (3 != argc) {
+		/* Not enough arguments, so just show usage information */
+		show_cmd_usage();
+		return 1;
+	}
+
+	if (strcmp(argv[1], "all") == 0) {
+		led_mask = LED_ALL_MASK;
+	} else {
+		temp = atoi(argv[1]);
+		if (temp < 0 || temp >= NUMBER_LEDS) {
+			printf("Invalid LED number [%s]\n", argv[1]);
+			show_cmd_usage();
+			return 2;
+		}
+		led_mask |= (1 << temp);
+	}
+
+	if (strcmp(argv[2], "off") == 0) {
+		action = ACTION_OFF;
+	} else if (strcmp(argv[2], "on") == 0) {
+		action = ACTION_ON;
+	} else if (strcmp(argv[2], "toggle") == 0) {
+		action = ACTION_TOGGLE;
+	} else {
+		printf("Invalid action [%s]\n", argv[2]);
+		show_cmd_usage();
+		return 3;
+	}
+
+	for (temp = 0; temp < NUMBER_LEDS; temp++) {
+		if ((led_mask & (1 << temp)) > 0) {
+			/*
+			 * It is possible that the user has wired one of PF6-PF11 to
+			 * something other than an LED, so this will only change a pin
+			 * to output if the user has indicated a state change.  This may
+			 * happen a lot, but this way is safer than just setting all pins
+			 * to output.
+			 */
+			configure_GPIO_to_output(temp);
+
+			led_current_state =
+			    ((*pPORTFIO & led_ports[temp]) >
+			     0) ? LED_STATE_ON : LED_STATE_OFF;
+	/*
+		printf("LED state for index %d (%x) is %d\n", temp, led_ports[temp],
+			led_current_state);
+		printf("*pPORTFIO is %x\n", *pPORTFIO);
+	*/
+			if (ACTION_ON == action
+			    || (ACTION_TOGGLE == action
+				&& 0 == led_current_state)) {
+				printf("Turning LED %d on\n", temp);
+				set_led_state(temp, LED_STATE_ON);
+			} else {
+				printf("Turning LED %d off\n", temp);
+				set_led_state(temp, LED_STATE_OFF);
+			}
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * The GPIO pins that go to the LEDs on the BF537 stamp must be configured
+ * as output.  This function simply configures them that way.  This could
+ * be done to all of the GPIO lines at once, but if a user is using a
+ * custom board, this will try to be nice and only change the GPIO lines
+ * that the user specifically names.
+ */
+void configure_GPIO_to_output(int index)
+{
+	int port;
+
+	port = led_ports[index];
+
+	/* Clear the Port F Function Enable Register */
+	*pPORTF_FER &= ~port;
+	/* Set the Port F I/O direction register */
+	*pPORTFIO_DIR |= port;
+	/* Clear the Port F I/O Input Enable Register */
+	*pPORTFIO_INEN &= ~port;
+}
+
+/* Enforce the given state on the GPIO line for the indicated LED */
+void set_led_state(int index, int state)
+{
+	int port;
+
+	port = led_ports[index];
+
+	if (LED_STATE_OFF == state) {
+		/* Clear the bit to turn off the LED */
+		*pPORTFIO &= ~port;
+	} else {
+		/* Set the bit to turn on the LED */
+		*pPORTFIO |= port;
+	}
+}
+
+/* Display usage information */
+void show_cmd_usage()
+{
+	printf("Usage:\n%s", USAGE_LONG);
+}
+
+/* Register information for u-boot to find this command */
+U_BOOT_CMD(led, 3, 1, do_bf537led,
+	   "led- Control BF537 stamp LEDs\n", USAGE_LONG);
+
+#endif

board/bf537-stamp/config.mk

@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes
+#  256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h
+TEXT_BASE = 0x03FC0000

board/bf537-stamp/ether_bf537.c

@@ -0,0 +1,545 @@
+/*
+ * ADI Blackfin 537 MAC Ethernet
+ *
+ * Copyright (c) 2005 Analog Device, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <net.h>
+#include <command.h>
+#include <malloc.h>
+#include "ether_bf537.h"
+
+#ifdef CONFIG_POST
+#include <post.h>
+#endif
+
+#undef DEBUG_ETHERNET
+
+#ifdef DEBUG_ETHERNET
+#define DEBUGF(fmt,args...) printf(fmt,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+
+#define RXBUF_BASE_ADDR		0xFF900000
+#define TXBUF_BASE_ADDR		0xFF800000
+#define TX_BUF_CNT		1
+
+#define TOUT_LOOP 		1000000
+
+ADI_ETHER_BUFFER *txbuf[TX_BUF_CNT];
+ADI_ETHER_BUFFER *rxbuf[PKTBUFSRX];
+static u16 txIdx;		/* index of the current RX buffer */
+static u16 rxIdx;		/* index of the current TX buffer */
+
+u8 SrcAddr[6];
+u16 PHYregs[NO_PHY_REGS];	/* u16 PHYADDR; */
+
+/* DMAx_CONFIG values at DMA Restart */
+const ADI_DMA_CONFIG_REG rxdmacfg = { 1, 1, 2, 0, 0, 0, 0, 5, 7 };
+
+#if 0
+	rxdmacfg.b_DMA_EN = 1;	/* enabled */
+	rxdmacfg.b_WNR    = 1;	/* write to memory */
+	rxdmacfg.b_WDSIZE = 2;	/* wordsize is 32 bits */
+	rxdmacfg.b_DMA2D  = 0;	/* N/A */
+	rxdmacfg.b_RESTART= 0;	/* N/A */
+	rxdmacfg.b_DI_SEL = 0;	/* N/A */
+	rxdmacfg.b_DI_EN  = 0;	/* no interrupt */
+	rxdmacfg.b_NDSIZE = 5;	/* 5 half words is desc size. */
+	rxdmacfg.b_FLOW   = 7;	/* large desc flow  */
+#endif
+
+const ADI_DMA_CONFIG_REG txdmacfg = { 1, 0, 2, 0, 0, 0, 0, 5, 7 };
+
+#if 0
+	txdmacfg.b_DMA_EN = 1;	/* enabled */
+	txdmacfg.b_WNR    = 0;	/* read from memory */
+	txdmacfg.b_WDSIZE = 2;	/* wordsize is 32 bits */
+	txdmacfg.b_DMA2D  = 0;	/* N/A */
+	txdmacfg.b_RESTART= 0;	/* N/A */
+	txdmacfg.b_DI_SEL = 0;	/* N/A */
+	txdmacfg.b_DI_EN  = 0;	/* no interrupt */
+	txdmacfg.b_NDSIZE = 5;	/* 5 half words is desc size. */
+	txdmacfg.b_FLOW   = 7;	/* large desc flow */
+#endif
+
+ADI_ETHER_BUFFER *SetupRxBuffer(int no);
+ADI_ETHER_BUFFER *SetupTxBuffer(int no);
+
+static int bfin_EMAC_init(struct eth_device *dev, bd_t * bd);
+static void bfin_EMAC_halt(struct eth_device *dev);
+static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet,
+			  int length);
+static int bfin_EMAC_recv(struct eth_device *dev);
+
+int bfin_EMAC_initialize(bd_t * bis)
+{
+	struct eth_device *dev;
+	dev = (struct eth_device *)malloc(sizeof(*dev));
+	if (dev == NULL)
+		hang();
+
+	memset(dev, 0, sizeof(*dev));
+	sprintf(dev->name, "BF537 ETHERNET");
+
+	dev->iobase = 0;
+	dev->priv = 0;
+	dev->init = bfin_EMAC_init;
+	dev->halt = bfin_EMAC_halt;
+	dev->send = bfin_EMAC_send;
+	dev->recv = bfin_EMAC_recv;
+
+	eth_register(dev);
+
+	return 1;
+}
+
+static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet,
+			  int length)
+{
+	int i;
+	int result = 0;
+	unsigned int *buf;
+	buf = (unsigned int *)packet;
+
+	if (length <= 0) {
+		printf("Ethernet: bad packet size: %d\n", length);
+		goto out;
+	}
+
+	if ((*pDMA2_IRQ_STATUS & DMA_ERR) != 0) {
+		printf("Ethernet: tx DMA error\n");
+		goto out;
+	}
+
+	for (i = 0; (*pDMA2_IRQ_STATUS & DMA_RUN) != 0; i++) {
+		if (i > TOUT_LOOP) {
+			puts("Ethernet: tx time out\n");
+			goto out;
+		}
+	}
+	txbuf[txIdx]->FrmData->NoBytes = length;
+	memcpy(txbuf[txIdx]->FrmData->Dest, (void *)packet, length);
+	txbuf[txIdx]->Dma[0].START_ADDR = (u32) txbuf[txIdx]->FrmData;
+	*pDMA2_NEXT_DESC_PTR = &txbuf[txIdx]->Dma[0];
+	*pDMA2_CONFIG = *(u16 *) (void *)(&txdmacfg);
+	*pEMAC_OPMODE |= TE;
+
+	for (i = 0; (txbuf[txIdx]->StatusWord & TX_COMP) == 0; i++) {
+		if (i > TOUT_LOOP) {
+			puts("Ethernet: tx error\n");
+			goto out;
+		}
+	}
+	result = txbuf[txIdx]->StatusWord;
+	txbuf[txIdx]->StatusWord = 0;
+	if ((txIdx + 1) >= TX_BUF_CNT)
+		txIdx = 0;
+	else
+		txIdx++;
+      out:
+	DEBUGF("BFIN EMAC send: length = %d\n", length);
+	return result;
+}
+
+static int bfin_EMAC_recv(struct eth_device *dev)
+{
+	int length = 0;
+
+	for (;;) {
+		if ((rxbuf[rxIdx]->StatusWord & RX_COMP) == 0) {
+			length = -1;
+			break;
+		}
+		if ((rxbuf[rxIdx]->StatusWord & RX_DMAO) != 0) {
+			printf("Ethernet: rx dma overrun\n");
+			break;
+		}
+		if ((rxbuf[rxIdx]->StatusWord & RX_OK) == 0) {
+			printf("Ethernet: rx error\n");
+			break;
+		}
+		length = rxbuf[rxIdx]->StatusWord & 0x000007FF;
+		if (length <= 4) {
+			printf("Ethernet: bad frame\n");
+			break;
+		}
+		NetRxPackets[rxIdx] =
+		    (volatile uchar *)(rxbuf[rxIdx]->FrmData->Dest);
+		NetReceive(NetRxPackets[rxIdx], length - 4);
+		*pDMA1_IRQ_STATUS |= DMA_DONE | DMA_ERR;
+		rxbuf[rxIdx]->StatusWord = 0x00000000;
+		if ((rxIdx + 1) >= PKTBUFSRX)
+			rxIdx = 0;
+		else
+			rxIdx++;
+	}
+
+	return length;
+}
+
+/**************************************************************
+ *
+ * Ethernet Initialization Routine
+ *
+ *************************************************************/
+
+static int bfin_EMAC_init(struct eth_device *dev, bd_t * bd)
+{
+	u32 opmode;
+	int dat;
+	int i;
+	DEBUGF("Eth_init: ......\n");
+
+	txIdx = 0;
+	rxIdx = 0;
+
+/* Initialize System Register */
+	if (SetupSystemRegs(&dat) < 0)
+		return -1;
+
+/* Initialize EMAC address */
+	SetupMacAddr(SrcAddr);
+
+/* Initialize TX and RX buffer */
+	for (i = 0; i < PKTBUFSRX; i++) {
+		rxbuf[i] = SetupRxBuffer(i);
+		if (i > 0) {
+			rxbuf[i - 1]->Dma[1].NEXT_DESC_PTR =
+			    &(rxbuf[i]->Dma[0]);
+			if (i == (PKTBUFSRX - 1))
+				rxbuf[i]->Dma[1].NEXT_DESC_PTR =
+				    &(rxbuf[0]->Dma[0]);
+		}
+	}
+	for (i = 0; i < TX_BUF_CNT; i++) {
+		txbuf[i] = SetupTxBuffer(i);
+		if (i > 0) {
+			txbuf[i - 1]->Dma[1].NEXT_DESC_PTR =
+			    &(txbuf[i]->Dma[0]);
+			if (i == (TX_BUF_CNT - 1))
+				txbuf[i]->Dma[1].NEXT_DESC_PTR =
+				    &(txbuf[0]->Dma[0]);
+		}
+	}
+
+	/* Set RX DMA */
+	*pDMA1_NEXT_DESC_PTR = &rxbuf[0]->Dma[0];
+	*pDMA1_CONFIG = *((u16 *) (void *)&rxbuf[0]->Dma[0].CONFIG);
+
+	/* Wait MII done */
+	PollMdcDone();
+
+	/* We enable only RX here */
+	/* ASTP   : Enable Automatic Pad Stripping
+	   PR     : Promiscuous Mode for test
+	   PSF    : Receive frames with total length less than 64 bytes.
+	   FDMODE : Full Duplex Mode
+	   LB	  : Internal Loopback for test
+	   RE     : Receiver Enable */
+	if (dat == FDMODE)
+		opmode = ASTP | FDMODE | PSF;
+	else
+		opmode = ASTP | PSF;
+	opmode |= RE;
+#ifdef CONFIG_BFIN_MAC_RMII
+	opmode |= TE | RMII;
+#endif
+	/* Turn on the EMAC */
+	*pEMAC_OPMODE = opmode;
+	return 0;
+}
+
+static void bfin_EMAC_halt(struct eth_device *dev)
+{
+	DEBUGF("Eth_halt: ......\n");
+	/* Turn off the EMAC */
+	*pEMAC_OPMODE = 0x00000000;
+	/* Turn off the EMAC RX DMA */
+	*pDMA1_CONFIG = 0x0000;
+	*pDMA2_CONFIG = 0x0000;
+
+}
+
+void SetupMacAddr(u8 * MACaddr)
+{
+	char *tmp, *end;
+	int i;
+	/* this depends on a little-endian machine */
+	tmp = getenv("ethaddr");
+	if (tmp) {
+		for (i = 0; i < 6; i++) {
+			MACaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
+			if (tmp)
+				tmp = (*end) ? end + 1 : end;
+		}
+
+#ifndef CONFIG_NETCONSOLE
+		printf("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n",
+		       MACaddr[0], MACaddr[1],
+		       MACaddr[2], MACaddr[3], MACaddr[4], MACaddr[5]);
+#endif
+		*pEMAC_ADDRLO = MACaddr[0] | MACaddr[1] << 8 |
+		    MACaddr[2] << 16 | MACaddr[3] << 24;
+		*pEMAC_ADDRHI = MACaddr[4] | MACaddr[5] << 8;
+	}
+}
+
+void PollMdcDone(void)
+{
+	/* poll the STABUSY bit */
+	while (*pEMAC_STAADD & STABUSY) ;
+}
+
+void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data)
+{
+	PollMdcDone();
+
+	*pEMAC_STADAT = Data;
+
+	*pEMAC_STAADD = SET_PHYAD(PHYAddr) | SET_REGAD(RegAddr) |
+	    STAOP | STAIE | STABUSY;
+}
+
+/*********************************************************************************
+ *		Read an off-chip register in a PHY through the MDC/MDIO port     *
+ *********************************************************************************/
+u16 RdPHYReg(u16 PHYAddr, u16 RegAddr)
+{
+	u16 Data;
+
+	PollMdcDone();
+
+	*pEMAC_STAADD = SET_PHYAD(PHYAddr) | SET_REGAD(RegAddr) |
+	    STAIE | STABUSY;
+
+	PollMdcDone();
+
+	Data = (u16) * pEMAC_STADAT;
+
+	PHYregs[RegAddr] = Data;	/* save shadow copy */
+
+	return Data;
+}
+
+void SoftResetPHY(void)
+{
+	u16 phydat;
+	/* set the reset bit */
+	WrPHYReg(PHYADDR, PHY_MODECTL, PHY_RESET);
+	/* and clear it again */
+	WrPHYReg(PHYADDR, PHY_MODECTL, 0x0000);
+	do {
+		/* poll until reset is complete */
+		phydat = RdPHYReg(PHYADDR, PHY_MODECTL);
+	} while ((phydat & PHY_RESET) != 0);
+}
+
+int SetupSystemRegs(int *opmode)
+{
+	u16 sysctl, phydat;
+	int count = 0;
+	/* Enable PHY output */
+	*pVR_CTL |= PHYCLKOE;
+	/* MDC  = 2.5 MHz */
+	sysctl = SET_MDCDIV(24);
+	/* Odd word alignment for Receive Frame DMA word */
+	/* Configure checksum support and rcve frame word alignment */
+	sysctl |= RXDWA | RXCKS;
+	*pEMAC_SYSCTL = sysctl;
+	/* auto negotiation on  */
+	/* full duplex */
+	/* 100 Mbps */
+	phydat = PHY_ANEG_EN | PHY_DUPLEX | PHY_SPD_SET;
+	WrPHYReg(PHYADDR, PHY_MODECTL, phydat);
+	do {
+		udelay(1000);
+		phydat = RdPHYReg(PHYADDR, PHY_MODESTAT);
+		if (count > 3000) {
+			printf
+			    ("Link is down, please check your network connection\n");
+			return -1;
+		}
+		count++;
+	} while (!(phydat & 0x0004));
+
+	phydat = RdPHYReg(PHYADDR, PHY_ANLPAR);
+
+	if ((phydat & 0x0100) || (phydat & 0x0040))
+		*opmode = FDMODE;
+	else
+		*opmode = 0;
+
+	*pEMAC_MMC_CTL = RSTC | CROLL;
+
+	/* Initialize the TX DMA channel registers */
+	*pDMA2_X_COUNT = 0;
+	*pDMA2_X_MODIFY = 4;
+	*pDMA2_Y_COUNT = 0;
+	*pDMA2_Y_MODIFY = 0;
+
+	/* Initialize the RX DMA channel registers */
+	*pDMA1_X_COUNT = 0;
+	*pDMA1_X_MODIFY = 4;
+	*pDMA1_Y_COUNT = 0;
+	*pDMA1_Y_MODIFY = 0;
+	return 0;
+}
+
+ADI_ETHER_BUFFER *SetupRxBuffer(int no)
+{
+	ADI_ETHER_FRAME_BUFFER *frmbuf;
+	ADI_ETHER_BUFFER *buf;
+	int nobytes_buffer = sizeof(ADI_ETHER_BUFFER[2]) / 2;	/* ensure a multi. of 4 */
+	int total_size = nobytes_buffer + RECV_BUFSIZE;
+
+	buf = (ADI_ETHER_BUFFER *) (RXBUF_BASE_ADDR + no * total_size);
+	frmbuf =
+	    (ADI_ETHER_FRAME_BUFFER *) (RXBUF_BASE_ADDR + no * total_size +
+					nobytes_buffer);
+
+	memset(buf, 0x00, nobytes_buffer);
+	buf->FrmData = frmbuf;
+	memset(frmbuf, 0xfe, RECV_BUFSIZE);
+
+	/* set up first desc to point to receive frame buffer */
+	buf->Dma[0].NEXT_DESC_PTR = &(buf->Dma[1]);
+	buf->Dma[0].START_ADDR = (u32) buf->FrmData;
+	buf->Dma[0].CONFIG.b_DMA_EN = 1;	/* enabled */
+	buf->Dma[0].CONFIG.b_WNR = 1;	/* Write to memory */
+	buf->Dma[0].CONFIG.b_WDSIZE = 2;	/* wordsize is 32 bits */
+	buf->Dma[0].CONFIG.b_NDSIZE = 5;	/* 5 half words is desc size. */
+	buf->Dma[0].CONFIG.b_FLOW = 7;	/* large desc flow */
+
+	/* set up second desc to point to status word */
+	buf->Dma[1].NEXT_DESC_PTR = &(buf->Dma[0]);
+	buf->Dma[1].START_ADDR = (u32) & buf->IPHdrChksum;
+	buf->Dma[1].CONFIG.b_DMA_EN = 1;	/* enabled */
+	buf->Dma[1].CONFIG.b_WNR = 1;	/* Write to memory */
+	buf->Dma[1].CONFIG.b_WDSIZE = 2;	/* wordsize is 32 bits */
+	buf->Dma[1].CONFIG.b_DI_EN = 1;	/* enable interrupt */
+	buf->Dma[1].CONFIG.b_NDSIZE = 5;	/* must be 0 when FLOW is 0 */
+	buf->Dma[1].CONFIG.b_FLOW = 7;	/* stop */
+
+	return buf;
+}
+
+ADI_ETHER_BUFFER *SetupTxBuffer(int no)
+{
+	ADI_ETHER_FRAME_BUFFER *frmbuf;
+	ADI_ETHER_BUFFER *buf;
+	int nobytes_buffer = sizeof(ADI_ETHER_BUFFER[2]) / 2;	/* ensure a multi. of 4 */
+	int total_size = nobytes_buffer + RECV_BUFSIZE;
+
+	buf = (ADI_ETHER_BUFFER *) (TXBUF_BASE_ADDR + no * total_size);
+	frmbuf =
+	    (ADI_ETHER_FRAME_BUFFER *) (TXBUF_BASE_ADDR + no * total_size +
+					nobytes_buffer);
+
+	memset(buf, 0x00, nobytes_buffer);
+	buf->FrmData = frmbuf;
+	memset(frmbuf, 0x00, RECV_BUFSIZE);
+
+	/* set up first desc to point to receive frame buffer */
+	buf->Dma[0].NEXT_DESC_PTR = &(buf->Dma[1]);
+	buf->Dma[0].START_ADDR = (u32) buf->FrmData;
+	buf->Dma[0].CONFIG.b_DMA_EN = 1;	/* enabled */
+	buf->Dma[0].CONFIG.b_WNR = 0;	/* Read to memory */
+	buf->Dma[0].CONFIG.b_WDSIZE = 2;	/* wordsize is 32 bits */
+	buf->Dma[0].CONFIG.b_NDSIZE = 5;	/* 5 half words is desc size. */
+	buf->Dma[0].CONFIG.b_FLOW = 7;	/* large desc flow */
+
+	/* set up second desc to point to status word */
+	buf->Dma[1].NEXT_DESC_PTR = &(buf->Dma[0]);
+	buf->Dma[1].START_ADDR = (u32) & buf->StatusWord;
+	buf->Dma[1].CONFIG.b_DMA_EN = 1;	/* enabled */
+	buf->Dma[1].CONFIG.b_WNR = 1;	/* Write to memory */
+	buf->Dma[1].CONFIG.b_WDSIZE = 2;	/* wordsize is 32 bits */
+	buf->Dma[1].CONFIG.b_DI_EN = 1;	/* enable interrupt */
+	buf->Dma[1].CONFIG.b_NDSIZE = 0;	/* must be 0 when FLOW is 0 */
+	buf->Dma[1].CONFIG.b_FLOW = 0;	/* stop */
+
+	return buf;
+}
+
+#if defined(CONFIG_POST) && defined(CFG_POST_ETHER)
+int ether_post_test(int flags)
+{
+	uchar buf[64];
+	int i, value = 0;
+	int length;
+
+	printf("\n--------");
+	bfin_EMAC_init(NULL, NULL);
+	/* construct the package */
+	buf[0] = buf[6] = (unsigned char)(*pEMAC_ADDRLO & 0xFF);
+	buf[1] = buf[7] = (unsigned char)((*pEMAC_ADDRLO & 0xFF00) >> 8);
+	buf[2] = buf[8] = (unsigned char)((*pEMAC_ADDRLO & 0xFF0000) >> 16);
+	buf[3] = buf[9] = (unsigned char)((*pEMAC_ADDRLO & 0xFF000000) >> 24);
+	buf[4] = buf[10] = (unsigned char)(*pEMAC_ADDRHI & 0xFF);
+	buf[5] = buf[11] = (unsigned char)((*pEMAC_ADDRHI & 0xFF00) >> 8);
+	buf[12] = 0x08;		/* Type: ARP */
+	buf[13] = 0x06;
+	buf[14] = 0x00;		/* Hardware type: Ethernet */
+	buf[15] = 0x01;
+	buf[16] = 0x08;		/* Protocal type: IP */
+	buf[17] = 0x00;
+	buf[18] = 0x06;		/* Hardware size    */
+	buf[19] = 0x04;		/* Protocol size    */
+	buf[20] = 0x00;		/* Opcode: request  */
+	buf[21] = 0x01;
+
+	for (i = 0; i < 42; i++)
+		buf[i + 22] = i;
+	printf("--------Send 64 bytes......\n");
+	bfin_EMAC_send(NULL, (volatile void *)buf, 64);
+	for (i = 0; i < 100; i++) {
+		udelay(10000);
+		if ((rxbuf[rxIdx]->StatusWord & RX_COMP) != 0) {
+			value = 1;
+			break;
+		}
+	}
+	if (value == 0) {
+		printf("--------EMAC can't receive any data\n");
+		eth_halt();
+		return -1;
+	}
+	length = rxbuf[rxIdx]->StatusWord & 0x000007FF - 4;
+	for (i = 0; i < length; i++) {
+		if (rxbuf[rxIdx]->FrmData->Dest[i] != buf[i]) {
+			printf("--------EMAC receive error data!\n");
+			eth_halt();
+			return -1;
+		}
+	}
+	printf("--------receive %d bytes, matched\n", length);
+	bfin_EMAC_halt(NULL);
+	return 0;
+}
+#endif
+#endif				/* CFG_CMD_NET */

board/bf537-stamp/ether_bf537.h

@@ -0,0 +1,110 @@
+#define PHYADDR			0x01
+#define NO_PHY_REGS		0x20
+
+#define DEFAULT_PHY_PHYID1	0x0007
+#define DEFAULT_PHY_PHYID2	0xC0A3
+#define PHY_MODECTL		0x00
+#define PHY_MODESTAT		0x01
+#define PHY_PHYID1		0x02
+#define PHY_PHYID2		0x03
+#define PHY_ANAR		0x04
+#define PHY_ANLPAR		0x05
+#define PHY_ANER		0x06
+
+#define PHY_RESET		0x8000
+#define PHY_ANEG_EN		0x1000
+#define PHY_DUPLEX		0x0100
+#define PHY_SPD_SET		0x2000
+
+#define RECV_BUFSIZE		(0x614)
+
+typedef volatile u32 reg32;
+typedef volatile u16 reg16;
+
+typedef struct ADI_DMA_CONFIG_REG {
+	u16 b_DMA_EN:1;		/* 0	Enabled				*/
+	u16 b_WNR:1;		/* 1	Direction			*/
+	u16 b_WDSIZE:2;		/* 2:3	Transfer word size		*/
+	u16 b_DMA2D:1;		/* 4	DMA mode			*/
+	u16 b_RESTART:1;	/* 5	Retain FIFO			*/
+	u16 b_DI_SEL:1;		/* 6	Data interrupt timing select	*/
+	u16 b_DI_EN:1;		/* 7	Data interrupt enabled		*/
+	u16 b_NDSIZE:4;		/* 8:11	Flex descriptor size		*/
+	u16 b_FLOW:3;		/* 12:14Flow				*/
+} ADI_DMA_CONFIG_REG;
+
+typedef struct adi_ether_frame_buffer {
+	u16 NoBytes;		/* the no. of following bytes	*/
+	u8 Dest[6];		/* destination MAC address	*/
+	u8 Srce[6];		/* source MAC address		*/
+	u16 LTfield;		/* length/type field		*/
+	u8 Data[0];		/* payload bytes		*/
+} ADI_ETHER_FRAME_BUFFER;
+/* 16 bytes/struct	*/
+
+typedef struct dma_descriptor {
+	struct dma_descriptor *NEXT_DESC_PTR;
+	u32 START_ADDR;
+	ADI_DMA_CONFIG_REG CONFIG;
+} DMA_DESCRIPTOR;
+/* 10 bytes/struct in 12 bytes */
+
+typedef struct adi_ether_buffer {
+	DMA_DESCRIPTOR Dma[2];		/* first for the frame, second for the status */
+	ADI_ETHER_FRAME_BUFFER *FrmData;/* pointer to data */
+	struct adi_ether_buffer *pNext;	/* next buffer */
+	struct adi_ether_buffer *pPrev;	/* prev buffer */
+	u16 IPHdrChksum;		/* the IP header checksum */
+	u16 IPPayloadChksum;		/* the IP header and payload checksum */
+	volatile u32 StatusWord;	/* the frame status word */
+} ADI_ETHER_BUFFER;
+/* 40 bytes/struct in 44 bytes */
+
+void SetupMacAddr(u8 * MACaddr);
+
+void PollMdcDone(void);
+void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data);
+u16 RdPHYReg(u16 PHYAddr, u16 RegAddr);
+void SoftResetPHY(void);
+void DumpPHYRegs(void);
+
+int SetupSystemRegs(int *opmode);
+
+/**
+ * is_zero_ether_addr - Determine if give Ethernet address is all zeros.
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is all zeroes.
+ */
+static inline int is_zero_ether_addr(const u8 * addr)
+{
+	return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]);
+}
+
+/**
+ * is_multicast_ether_addr - Determine if the Ethernet address is a multicast.
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is a multicast address.
+ * By definition the broadcast address is also a multicast address.
+ */
+static inline int is_multicast_ether_addr(const u8 * addr)
+{
+	return (0x01 & addr[0]);
+}
+
+/**
+ * is_valid_ether_addr - Determine if the given Ethernet address is valid
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
+ * a multicast address, and is not FF:FF:FF:FF:FF:FF.
+ *
+ * Return true if the address is valid.
+ */
+static inline int is_valid_ether_addr(const u8 * addr)
+{
+	/* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
+	 * explicitly check for it here. */
+	return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
+}

board/bf537-stamp/flash-defines.h

@@ -0,0 +1,123 @@
+/*
+ * U-boot - flash-defines.h
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FLASHDEFINES_H__
+#define __FLASHDEFINES_H__
+
+#include <common.h>
+
+#define V_ULONG(a)		(*(volatile unsigned long *)( a ))
+#define V_BYTE(a)		(*(volatile unsigned char *)( a ))
+#define TRUE			0x1
+#define FALSE			0x0
+#define BUFFER_SIZE		0x80000
+#define NO_COMMAND		0
+#define GET_CODES		1
+#define RESET			2
+#define WRITE			3
+#define FILL			4
+#define ERASE_ALL		5
+#define ERASE_SECT		6
+#define READ			7
+#define GET_SECTNUM		8
+#define FLASH_START_L 		0x0000
+#define FLASH_START_H 		0x2000
+#define FLASH_MAN_ST 		2
+#define RESET_VAL		0xF0
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+int get_codes(void);
+int poll_toggle_bit(long lOffset);
+void reset_flash(void);
+int erase_flash(void);
+int erase_block_flash(int);
+void unlock_flash(long lOffset);
+int write_data(long lStart, long lCount, uchar * pnData);
+int read_flash(long nOffset, int *pnValue);
+int write_flash(long nOffset, int nValue);
+void get_sector_number(long lOffset, int *pnSector);
+int GetSectorProtectionStatus(flash_info_t * info, int nSector);
+int GetOffset(int nBlock);
+int AFP_NumSectors = 71;
+long AFP_SectorSize2 = 0x10000;
+int AFP_SectorSize1 = 0x2000;
+
+#define NUM_SECTORS		71
+
+#define WRITESEQ1		0x0AAA
+#define WRITESEQ2		0x0554
+#define WRITESEQ3		0x0AAA
+#define WRITESEQ4		0x0AAA
+#define WRITESEQ5		0x0554
+#define WRITESEQ6		0x0AAA
+#define WRITEDATA1		0xaa
+#define WRITEDATA2		0x55
+#define WRITEDATA3		0x80
+#define WRITEDATA4		0xaa
+#define WRITEDATA5		0x55
+#define WRITEDATA6		0x10
+#define PriFlashABegin		0
+#define SecFlashABegin		8
+#define SecFlashBBegin		36
+#define PriFlashAOff		0x0
+#define PriFlashBOff		0x100000
+#define SecFlashAOff		0x10000
+#define SecFlashBOff		0x280000
+#define INVALIDLOCNSTART	0x20270000
+#define INVALIDLOCNEND		0x20280000
+#define BlockEraseVal		0x30
+#define UNLOCKDATA1		0xaa
+#define UNLOCKDATA2		0x55
+#define UNLOCKDATA3		0xa0
+#define GETCODEDATA1		0xaa
+#define GETCODEDATA2		0x55
+#define GETCODEDATA3		0x90
+#define SecFlashASec1Off	0x200000
+#define SecFlashASec2Off	0x204000
+#define SecFlashASec3Off	0x206000
+#define SecFlashASec4Off	0x208000
+#define SecFlashAEndOff		0x210000
+#define SecFlashBSec1Off	0x280000
+#define SecFlashBSec2Off	0x284000
+#define SecFlashBSec3Off	0x286000
+#define SecFlashBSec4Off	0x288000
+#define SecFlashBEndOff		0x290000
+
+#define SECT32			32
+#define SECT33			33
+#define SECT34			34
+#define SECT35			35
+#define SECT36			36
+#define SECT37			37
+#define SECT38			38
+#define SECT39			39
+
+#define FLASH_SUCCESS	0
+#define FLASH_FAIL	-1
+
+#endif

board/bf537-stamp/flash.c

@@ -0,0 +1,403 @@
+/*
+ * U-boot - flash.c Flash driver for PSD4256GV
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <malloc.h>
+#include <config.h>
+#include <asm/io.h>
+#include "flash-defines.h"
+
+void flash_reset(void)
+{
+	reset_flash();
+}
+
+unsigned long flash_get_size(ulong baseaddr, flash_info_t * info, int bank_flag)
+{
+	int id = 0, i = 0;
+	static int FlagDev = 1;
+
+	id = get_codes();
+	if (FlagDev) {
+		FlagDev = 0;
+	}
+	info->flash_id = id;
+	switch (bank_flag) {
+	case 0:
+		for (i = PriFlashABegin; i < SecFlashABegin; i++)
+			info->start[i] = (baseaddr + (i * AFP_SectorSize1));
+		for (i = SecFlashABegin; i < NUM_SECTORS; i++)
+			info->start[i] =
+			    (baseaddr + SecFlashAOff +
+			     ((i - SecFlashABegin) * AFP_SectorSize2));
+		info->size = 0x400000;
+		info->sector_count = NUM_SECTORS;
+		break;
+	case 1:
+		info->start[0] = baseaddr + SecFlashASec1Off;
+		info->start[1] = baseaddr + SecFlashASec2Off;
+		info->start[2] = baseaddr + SecFlashASec3Off;
+		info->start[3] = baseaddr + SecFlashASec4Off;
+		info->size = 0x10000;
+		info->sector_count = 4;
+		break;
+	case 2:
+		info->start[0] = baseaddr + SecFlashBSec1Off;
+		info->start[1] = baseaddr + SecFlashBSec2Off;
+		info->start[2] = baseaddr + SecFlashBSec3Off;
+		info->start[3] = baseaddr + SecFlashBSec4Off;
+		info->size = 0x10000;
+		info->sector_count = 4;
+		break;
+	}
+	return (info->size);
+}
+
+unsigned long flash_init(void)
+{
+	unsigned long size_b;
+	int i;
+
+	size_b = 0;
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	size_b = flash_get_size(CFG_FLASH_BASE, &flash_info[0], 0);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b == 0) {
+		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+		       size_b, size_b >> 20);
+	}
+
+	/* flash_protect (int flag, ulong from, ulong to, flash_info_t *info) */
+	(void)flash_protect(FLAG_PROTECT_SET, CFG_FLASH_BASE,
+			    (flash_info[0].start[2] - 1), &flash_info[0]);
+#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
+	(void)flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF,
+			    &flash_info[0]);
+#endif
+
+	return (size_b);
+}
+
+void flash_print_info(flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id) {
+	case (STM_ID_29W320EB & 0xFFFF):
+	case (STM_ID_29W320DB & 0xFFFF):
+		printf("ST Microelectronics ");
+		break;
+	default:
+		printf("Unknown Vendor: (0x%08X) ", info->flash_id);
+		break;
+	}
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf(" %08lX%s",
+		       info->start[i], info->protect[i] ? " (RO)" : "     ");
+	}
+	printf("\n");
+	return;
+}
+
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+	int cnt = 0, i;
+	int prot, sect;
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect])
+			prot++;
+	}
+	if (prot)
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	else
+		printf("\n");
+
+	cnt = s_last - s_first + 1;
+
+#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
+	printf("Erasing Flash locations, Please Wait\n");
+	for (i = s_first; i <= s_last; i++) {
+		if (info->protect[i] == 0) {	/* not protected */
+			if (erase_block_flash(i) < 0) {
+				printf("Error Sector erasing \n");
+				return FLASH_FAIL;
+			}
+		}
+	}
+#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+	if (cnt == FLASH_TOT_SECT) {
+		printf("Erasing flash, Please Wait \n");
+		if (erase_flash() < 0) {
+			printf("Erasing flash failed \n");
+			return FLASH_FAIL;
+		}
+	} else {
+		printf("Erasing Flash locations, Please Wait\n");
+		for (i = s_first; i <= s_last; i++) {
+			if (info->protect[i] == 0) {	/* not protected */
+				if (erase_block_flash(i) < 0) {
+					printf("Error Sector erasing \n");
+					return FLASH_FAIL;
+				}
+			}
+		}
+	}
+#endif
+	printf("\n");
+	return FLASH_SUCCESS;
+}
+
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	int d;
+	if (addr % 2) {
+		read_flash(addr - 1 - CFG_FLASH_BASE, &d);
+		d = (int)((d & 0x00FF) | (*src++ << 8));
+		write_data(addr - 1, 2, (uchar *) & d);
+		write_data(addr + 1, cnt - 1, src);
+	} else
+		write_data(addr, cnt, src);
+	return FLASH_SUCCESS;
+}
+
+int write_data(long lStart, long lCount, uchar * pnData)
+{
+	long i = 0;
+	unsigned long ulOffset = lStart - CFG_FLASH_BASE;
+	int d;
+	int nSector = 0;
+	int flag = 0;
+
+	if (lCount % 2) {
+		flag = 1;
+		lCount = lCount - 1;
+	}
+
+	for (i = 0; i < lCount - 1; i += 2, ulOffset += 2) {
+		get_sector_number(ulOffset, &nSector);
+		read_flash(ulOffset, &d);
+		if (d != 0xffff) {
+			printf
+			    ("Flash not erased at offset 0x%x Please erase to reprogram \n",
+			     ulOffset);
+			return FLASH_FAIL;
+		}
+		unlock_flash(ulOffset);
+		d = (int)(pnData[i] | pnData[i + 1] << 8);
+		write_flash(ulOffset, d);
+		if (poll_toggle_bit(ulOffset) < 0) {
+			printf("Error programming the flash \n");
+			return FLASH_FAIL;
+		}
+		if ((i > 0) && (!(i % AFP_SectorSize2)))
+			printf(".");
+	}
+	if (flag) {
+		get_sector_number(ulOffset, &nSector);
+		read_flash(ulOffset, &d);
+		if (d != 0xffff) {
+			printf
+			    ("Flash not erased at offset 0x%x Please erase to reprogram \n",
+			     ulOffset);
+			return FLASH_FAIL;
+		}
+		unlock_flash(ulOffset);
+		d = (int)(pnData[i] | (d & 0xFF00));
+		write_flash(ulOffset, d);
+		if (poll_toggle_bit(ulOffset) < 0) {
+			printf("Error programming the flash \n");
+			return FLASH_FAIL;
+		}
+	}
+	return FLASH_SUCCESS;
+}
+
+int write_flash(long nOffset, int nValue)
+{
+	long addr;
+
+	addr = (CFG_FLASH_BASE + nOffset);
+	*(unsigned volatile short *)addr = nValue;
+	sync();
+#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+	if (icache_status())
+		udelay(CONFIG_CCLK_HZ / 1000000);
+#endif
+	return FLASH_SUCCESS;
+}
+
+int read_flash(long nOffset, int *pnValue)
+{
+	unsigned short *pFlashAddr =
+	    (unsigned short *)(CFG_FLASH_BASE + nOffset);
+
+	*pnValue = *pFlashAddr;
+
+	return TRUE;
+}
+
+int poll_toggle_bit(long lOffset)
+{
+	unsigned int u1, u2;
+	volatile unsigned long *FB =
+	    (volatile unsigned long *)(CFG_FLASH_BASE + lOffset);
+	while (1) {
+		u1 = *(volatile unsigned short *)FB;
+		u2 = *(volatile unsigned short *)FB;
+		u1 ^= u2;
+		if (!(u1 & 0x0040))
+			break;
+		if (!(u2 & 0x0020))
+			continue;
+		else {
+			u1 = *(volatile unsigned short *)FB;
+			u2 = *(volatile unsigned short *)FB;
+			u1 ^= u2;
+			if (!(u1 & 0x0040))
+				break;
+			else {
+				reset_flash();
+				return FLASH_FAIL;
+			}
+		}
+	}
+	return FLASH_SUCCESS;
+}
+
+void reset_flash(void)
+{
+	write_flash(WRITESEQ1, RESET_VAL);
+	/* Wait for 10 micro seconds */
+	udelay(10);
+}
+
+int erase_flash(void)
+{
+	write_flash(WRITESEQ1, WRITEDATA1);
+	write_flash(WRITESEQ2, WRITEDATA2);
+	write_flash(WRITESEQ3, WRITEDATA3);
+	write_flash(WRITESEQ4, WRITEDATA4);
+	write_flash(WRITESEQ5, WRITEDATA5);
+	write_flash(WRITESEQ6, WRITEDATA6);
+
+	if (poll_toggle_bit(0x0000) < 0)
+		return FLASH_FAIL;
+
+	return FLASH_SUCCESS;
+}
+
+int erase_block_flash(int nBlock)
+{
+	long ulSectorOff = 0x0;
+
+	if ((nBlock < 0) || (nBlock > AFP_NumSectors))
+		return FALSE;
+
+	/* figure out the offset of the block in flash */
+	if ((nBlock >= 0) && (nBlock < SecFlashABegin))
+		ulSectorOff = nBlock * AFP_SectorSize1;
+
+	else if ((nBlock >= SecFlashABegin) && (nBlock < NUM_SECTORS))
+		ulSectorOff =
+		    SecFlashAOff + (nBlock - SecFlashABegin) * AFP_SectorSize2;
+	/* no such sector */
+	else
+		return FLASH_FAIL;
+
+	write_flash((WRITESEQ1 | ulSectorOff), WRITEDATA1);
+	write_flash((WRITESEQ2 | ulSectorOff), WRITEDATA2);
+	write_flash((WRITESEQ3 | ulSectorOff), WRITEDATA3);
+	write_flash((WRITESEQ4 | ulSectorOff), WRITEDATA4);
+	write_flash((WRITESEQ5 | ulSectorOff), WRITEDATA5);
+
+	write_flash(ulSectorOff, BlockEraseVal);
+
+	if (poll_toggle_bit(ulSectorOff) < 0)
+		return FLASH_FAIL;
+	printf(".");
+
+	return FLASH_SUCCESS;
+}
+
+void unlock_flash(long ulOffset)
+{
+	unsigned long ulOffsetAddr = ulOffset;
+	ulOffsetAddr &= 0xFFFF0000;
+
+	write_flash((WRITESEQ1 | ulOffsetAddr), UNLOCKDATA1);
+	write_flash((WRITESEQ2 | ulOffsetAddr), UNLOCKDATA2);
+	write_flash((WRITESEQ3 | ulOffsetAddr), UNLOCKDATA3);
+}
+
+int get_codes()
+{
+	int dev_id = 0;
+
+	write_flash(WRITESEQ1, GETCODEDATA1);
+	write_flash(WRITESEQ2, GETCODEDATA2);
+	write_flash(WRITESEQ3, GETCODEDATA3);
+
+	read_flash(0x0402, &dev_id);
+	dev_id &= 0x0000FFFF;
+
+	reset_flash();
+
+	return dev_id;
+}
+
+void get_sector_number(long ulOffset, int *pnSector)
+{
+	int nSector = 0;
+	long lMainEnd = 0x400000;
+	long lBootEnd = 0x10000;
+
+	/* sector numbers for the FLASH A boot sectors */
+	if (ulOffset < lBootEnd) {
+		nSector = (int)ulOffset / AFP_SectorSize1;
+	}
+	/* sector numbers for the FLASH B boot sectors */
+	else if ((ulOffset >= lBootEnd) && (ulOffset < lMainEnd)) {
+		nSector = ((ulOffset / (AFP_SectorSize2)) + 7);
+	}
+	/* if it is a valid sector, set it */
+	if ((nSector >= 0) && (nSector < AFP_NumSectors))
+		*pnSector = nSector;
+
+}

board/bf537-stamp/nand.c

@@ -0,0 +1,106 @@
+/*
+ * (C) Copyright 2006 Aubrey.Li, aubrey.li@analog.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <nand.h>
+
+#define CONCAT(a,b,c,d) a ## b ## c ## d
+#define PORT(a,b)  CONCAT(pPORT,a,b,)
+
+#ifndef CONFIG_NAND_GPIO_PORT
+#define CONFIG_NAND_GPIO_PORT F
+#endif
+
+/*
+ * hardware specific access to control-lines
+ */
+static void bfin_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	register struct nand_chip *this = mtd->priv;
+
+	switch (cmd) {
+
+	case NAND_CTL_SETCLE:
+		this->IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_CLE;
+		break;
+	case NAND_CTL_CLRCLE:
+		this->IO_ADDR_W = CFG_NAND_BASE;
+		break;
+
+	case NAND_CTL_SETALE:
+		this->IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_ALE;
+		break;
+	case NAND_CTL_CLRALE:
+		this->IO_ADDR_W = CFG_NAND_BASE;
+		break;
+	case NAND_CTL_SETNCE:
+	case NAND_CTL_CLRNCE:
+		break;
+	}
+
+	this->IO_ADDR_R = this->IO_ADDR_W;
+
+	/* Drain the writebuffer */
+	sync();
+}
+
+int bfin_device_ready(struct mtd_info *mtd)
+{
+	int ret = (*PORT(CONFIG_NAND_GPIO_PORT, IO) & BFIN_NAND_READY) ? 1 : 0;
+	sync();
+	return ret;
+}
+
+/*
+ * Board-specific NAND initialization. The following members of the
+ * argument are board-specific (per include/linux/mtd/nand.h):
+ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
+ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
+ * - hwcontrol: hardwarespecific function for accesing control-lines
+ * - dev_ready: hardwarespecific function for  accesing device ready/busy line
+ * - enable_hwecc?: function to enable (reset)  hardware ecc generator. Must
+ *   only be provided if a hardware ECC is available
+ * - eccmode: mode of ecc, see defines
+ * - chip_delay: chip dependent delay for transfering data from array to
+ *   read regs (tR)
+ * - options: various chip options. They can partly be set to inform
+ *   nand_scan about special functionality. See the defines for further
+ *   explanation
+ * Members with a "?" were not set in the merged testing-NAND branch,
+ * so they are not set here either.
+ */
+void board_nand_init(struct nand_chip *nand)
+{
+	*PORT(CONFIG_NAND_GPIO_PORT, _FER) &= ~BFIN_NAND_READY;
+	*PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY;
+	*PORT(CONFIG_NAND_GPIO_PORT, IO_INEN) |= BFIN_NAND_READY;
+
+	nand->hwcontrol = bfin_hwcontrol;
+	nand->eccmode = NAND_ECC_SOFT;
+	nand->dev_ready = bfin_device_ready;
+	nand->chip_delay = 30;
+}
+#endif				/* (CONFIG_COMMANDS & CFG_CMD_NAND) */

board/bf537-stamp/post-memory.c

@@ -0,0 +1,322 @@
+#include <common.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include <watchdog.h>
+
+#if CONFIG_POST & CFG_POST_MEMORY
+#define CLKIN 25000000
+#define PATTERN1 0x5A5A5A5A
+#define PATTERN2 0xAAAAAAAA
+
+#define CCLK_NUM	4
+#define SCLK_NUM	3
+
+void post_out_buff(char *buff);
+int post_key_pressed(void);
+void post_init_pll(int mult, int div);
+int post_init_sdram(int sclk);
+void post_init_uart(int sclk);
+
+const int pll[CCLK_NUM][SCLK_NUM][2] = {
+	{{20, 4}, {20, 5}, {20, 10}},	/* CCLK = 500M */
+	{{16, 4}, {16, 5}, {16, 8}},	/* CCLK = 400M */
+	{{8, 2}, {8, 4}, {8, 5}},	/* CCLK = 200M */
+	{{4, 1}, {4, 2}, {4, 4}}	/* CCLK = 100M */
+};
+const char *const log[CCLK_NUM][SCLK_NUM] = {
+	{"CCLK-500Mhz SCLK-125Mhz:    Writing...\0",
+	 "CCLK-500Mhz SCLK-100Mhz:    Writing...\0",
+	 "CCLK-500Mhz SCLK- 50Mhz:    Writing...\0",},
+	{"CCLK-400Mhz SCLK-100Mhz:    Writing...\0",
+	 "CCLK-400Mhz SCLK- 80Mhz:    Writing...\0",
+	 "CCLK-400Mhz SCLK- 50Mhz:    Writing...\0",},
+	{"CCLK-200Mhz SCLK-100Mhz:    Writing...\0",
+	 "CCLK-200Mhz SCLK- 50Mhz:    Writing...\0",
+	 "CCLK-200Mhz SCLK- 40Mhz:    Writing...\0",},
+	{"CCLK-100Mhz SCLK-100Mhz:    Writing...\0",
+	 "CCLK-100Mhz SCLK- 50Mhz:    Writing...\0",
+	 "CCLK-100Mhz SCLK- 25Mhz:    Writing...\0",},
+};
+
+int memory_post_test(int flags)
+{
+	int addr;
+	int m, n;
+	int sclk, sclk_temp;
+	int ret = 1;
+
+	sclk_temp = CLKIN / 1000000;
+	sclk_temp = sclk_temp * CONFIG_VCO_MULT;
+	for (sclk = 0; sclk_temp > 0; sclk++)
+		sclk_temp -= CONFIG_SCLK_DIV;
+	sclk = sclk * 1000000;
+	post_init_uart(sclk);
+	if (post_key_pressed() == 0)
+		return 0;
+
+	for (m = 0; m < CCLK_NUM; m++) {
+		for (n = 0; n < SCLK_NUM; n++) {
+			/* Calculate the sclk */
+			sclk_temp = CLKIN / 1000000;
+			sclk_temp = sclk_temp * pll[m][n][0];
+			for (sclk = 0; sclk_temp > 0; sclk++)
+				sclk_temp -= pll[m][n][1];
+			sclk = sclk * 1000000;
+
+			post_init_pll(pll[m][n][0], pll[m][n][1]);
+			post_init_sdram(sclk);
+			post_init_uart(sclk);
+			post_out_buff("\n\r\0");
+			post_out_buff(log[m][n]);
+			for (addr = 0x0; addr < CFG_MAX_RAM_SIZE; addr += 4)
+				*(unsigned long *)addr = PATTERN1;
+			post_out_buff("Reading...\0");
+			for (addr = 0x0; addr < CFG_MAX_RAM_SIZE; addr += 4) {
+				if ((*(unsigned long *)addr) != PATTERN1) {
+					post_out_buff("Error\n\r\0");
+					ret = 0;
+				}
+			}
+			post_out_buff("OK\n\r\0");
+		}
+	}
+	if (ret)
+		post_out_buff("memory POST passed\n\r\0");
+	else
+		post_out_buff("memory POST failed\n\r\0");
+
+	post_out_buff("\n\r\n\r\0");
+	return 1;
+}
+
+void post_init_uart(int sclk)
+{
+	int divisor;
+
+	for (divisor = 0; sclk > 0; divisor++)
+		sclk -= 57600 * 16;
+
+	*pPORTF_FER = 0x000F;
+	*pPORTH_FER = 0xFFFF;
+
+	*pUART_GCTL = 0x00;
+	*pUART_LCR = 0x83;
+	sync();
+	*pUART_DLL = (divisor & 0xFF);
+	sync();
+	*pUART_DLH = ((divisor >> 8) & 0xFF);
+	sync();
+	*pUART_LCR = 0x03;
+	sync();
+	*pUART_GCTL = 0x01;
+	sync();
+}
+
+void post_out_buff(char *buff)
+{
+
+	int i = 0;
+	for (i = 0; i < 0x80000; i++) ;
+	i = 0;
+	while ((buff[i] != '\0') && (i != 100)) {
+		while (!(*pUART_LSR & 0x20)) ;
+		*pUART_THR = buff[i];
+		sync();
+		i++;
+	}
+	for (i = 0; i < 0x80000; i++) ;
+}
+
+/* Using sw10-PF5 as the hotkey */
+#define KEY_LOOP 0x80000
+#define KEY_DELAY 0x80
+int post_key_pressed(void)
+{
+	int i, n;
+	unsigned short value;
+
+	*pPORTF_FER &= ~PF5;
+	*pPORTFIO_DIR &= ~PF5;
+	*pPORTFIO_INEN |= PF5;
+	sync();
+
+	post_out_buff("########Press SW10 to enter Memory POST########: 3\0");
+	for (i = 0; i < KEY_LOOP; i++) {
+		value = *pPORTFIO & PF5;
+		if (*pUART0_RBR == 0x0D) {
+			value = 0;
+			goto key_pressed;
+		}
+		if (value != 0) {
+			goto key_pressed;
+		}
+		for (n = 0; n < KEY_DELAY; n++)
+			asm("nop");
+	}
+	post_out_buff("\b2\0");
+
+	for (i = 0; i < KEY_LOOP; i++) {
+		value = *pPORTFIO & PF5;
+		if (*pUART0_RBR == 0x0D) {
+			value = 0;
+			goto key_pressed;
+		}
+		if (value != 0) {
+			goto key_pressed;
+		}
+		for (n = 0; n < KEY_DELAY; n++)
+			asm("nop");
+	}
+	post_out_buff("\b1\0");
+
+	for (i = 0; i < KEY_LOOP; i++) {
+		value = *pPORTFIO & PF5;
+		if (*pUART0_RBR == 0x0D) {
+			value = 0;
+			goto key_pressed;
+		}
+		if (value != 0) {
+			goto key_pressed;
+		}
+		for (n = 0; n < KEY_DELAY; n++)
+			asm("nop");
+	}
+      key_pressed:
+	post_out_buff("\b0");
+	post_out_buff("\n\r\0");
+	if (value == 0)
+		return 0;
+	post_out_buff("Hotkey has been pressed, Enter POST . . . . . .\n\r\0");
+	return 1;
+}
+
+void post_init_pll(int mult, int div)
+{
+
+	*pSIC_IWR = 0x01;
+	*pPLL_CTL = (mult << 9);
+	*pPLL_DIV = div;
+	asm("CLI R2;");
+	asm("IDLE;");
+	asm("STI R2;");
+	while (!(*pPLL_STAT & 0x20)) ;
+}
+
+int post_init_sdram(int sclk)
+{
+	int SDRAM_tRP, SDRAM_tRP_num, SDRAM_tRAS, SDRAM_tRAS_num, SDRAM_tRCD,
+	    SDRAM_tWR;
+	int SDRAM_Tref, SDRAM_NRA, SDRAM_CL, SDRAM_SIZE, SDRAM_WIDTH,
+	    mem_SDGCTL, mem_SDBCTL, mem_SDRRC;
+
+	if ((sclk > 119402985)) {
+		SDRAM_tRP = TRP_2;
+		SDRAM_tRP_num = 2;
+		SDRAM_tRAS = TRAS_7;
+		SDRAM_tRAS_num = 7;
+		SDRAM_tRCD = TRCD_2;
+		SDRAM_tWR = TWR_2;
+	} else if ((sclk > 104477612) && (sclk <= 119402985)) {
+		SDRAM_tRP = TRP_2;
+		SDRAM_tRP_num = 2;
+		SDRAM_tRAS = TRAS_6;
+		SDRAM_tRAS_num = 6;
+		SDRAM_tRCD = TRCD_2;
+		SDRAM_tWR = TWR_2;
+	} else if ((sclk > 89552239) && (sclk <= 104477612)) {
+		SDRAM_tRP = TRP_2;
+		SDRAM_tRP_num = 2;
+		SDRAM_tRAS = TRAS_5;
+		SDRAM_tRAS_num = 5;
+		SDRAM_tRCD = TRCD_2;
+		SDRAM_tWR = TWR_2;
+	} else if ((sclk > 74626866) && (sclk <= 89552239)) {
+		SDRAM_tRP = TRP_2;
+		SDRAM_tRP_num = 2;
+		SDRAM_tRAS = TRAS_4;
+		SDRAM_tRAS_num = 4;
+		SDRAM_tRCD = TRCD_2;
+		SDRAM_tWR = TWR_2;
+	} else if ((sclk > 66666667) && (sclk <= 74626866)) {
+		SDRAM_tRP = TRP_2;
+		SDRAM_tRP_num = 2;
+		SDRAM_tRAS = TRAS_3;
+		SDRAM_tRAS_num = 3;
+		SDRAM_tRCD = TRCD_2;
+		SDRAM_tWR = TWR_2;
+	} else if ((sclk > 59701493) && (sclk <= 66666667)) {
+		SDRAM_tRP = TRP_1;
+		SDRAM_tRP_num = 1;
+		SDRAM_tRAS = TRAS_4;
+		SDRAM_tRAS_num = 4;
+		SDRAM_tRCD = TRCD_1;
+		SDRAM_tWR = TWR_2;
+	} else if ((sclk > 44776119) && (sclk <= 59701493)) {
+		SDRAM_tRP = TRP_1;
+		SDRAM_tRP_num = 1;
+		SDRAM_tRAS = TRAS_3;
+		SDRAM_tRAS_num = 3;
+		SDRAM_tRCD = TRCD_1;
+		SDRAM_tWR = TWR_2;
+	} else if ((sclk > 29850746) && (sclk <= 44776119)) {
+		SDRAM_tRP = TRP_1;
+		SDRAM_tRP_num = 1;
+		SDRAM_tRAS = TRAS_2;
+		SDRAM_tRAS_num = 2;
+		SDRAM_tRCD = TRCD_1;
+		SDRAM_tWR = TWR_2;
+	} else if (sclk <= 29850746) {
+		SDRAM_tRP = TRP_1;
+		SDRAM_tRP_num = 1;
+		SDRAM_tRAS = TRAS_1;
+		SDRAM_tRAS_num = 1;
+		SDRAM_tRCD = TRCD_1;
+		SDRAM_tWR = TWR_2;
+	} else {
+		SDRAM_tRP = TRP_1;
+		SDRAM_tRP_num = 1;
+		SDRAM_tRAS = TRAS_1;
+		SDRAM_tRAS_num = 1;
+		SDRAM_tRCD = TRCD_1;
+		SDRAM_tWR = TWR_2;
+	}
+	/*SDRAM INFORMATION: */
+	SDRAM_Tref = 64;	/* Refresh period in milliseconds */
+	SDRAM_NRA = 4096;	/* Number of row addresses in SDRAM */
+	SDRAM_CL = CL_3;	/* 2 */
+
+	SDRAM_SIZE = EBSZ_64;
+	SDRAM_WIDTH = EBCAW_10;
+
+	mem_SDBCTL = SDRAM_WIDTH | SDRAM_SIZE | EBE;
+
+	/* Equation from section 17 (p17-46) of BF533 HRM */
+	mem_SDRRC =
+	    (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) -
+	    (SDRAM_tRAS_num + SDRAM_tRP_num);
+
+	/* Enable SCLK Out */
+	mem_SDGCTL =
+	    (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR
+	     | PSS);
+
+	sync();
+
+	*pEBIU_SDGCTL |= 0x1000000;
+	/* Set the SDRAM Refresh Rate control register based on SSCLK value */
+	*pEBIU_SDRRC = mem_SDRRC;
+
+	/* SDRAM Memory Bank Control Register */
+	*pEBIU_SDBCTL = mem_SDBCTL;
+
+	/* SDRAM Memory Global Control Register */
+	*pEBIU_SDGCTL = mem_SDGCTL;
+	sync();
+	return mem_SDRRC;
+}
+
+#endif				/* CONFIG_POST & CFG_POST_MEMORY */
+#endif				/* CONFIG_POST */

board/bf537-stamp/stm_m25p64.c

@@ -0,0 +1,515 @@
+/****************************************************************************
+ *  SPI flash driver for M25P64
+ ****************************************************************************/
+#include <common.h>
+#include <linux/ctype.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_SPI)
+
+/* Application definitions */
+
+#define	NUM_SECTORS 	128	/* number of sectors */
+#define SECTOR_SIZE	0x10000
+#define NOP_NUM		1000
+
+#define COMMON_SPI_SETTINGS (SPE|MSTR|CPHA|CPOL) /* Settings to the SPI_CTL */
+#define TIMOD01 (0x01)	/* stes the SPI to work with core instructions */
+
+/* Flash commands */
+#define	SPI_WREN	(0x06)	/*Set Write Enable Latch */
+#define	SPI_WRDI	(0x04)	/*Reset Write Enable Latch */
+#define	SPI_RDSR	(0x05)	/*Read Status Register */
+#define	SPI_WRSR	(0x01)	/*Write Status Register */
+#define	SPI_READ	(0x03)	/*Read data from memory */
+#define	SPI_FAST_READ	(0x0B)	/*Read data from memory */
+#define	SPI_PP		(0x02)	/*Program Data into memory */
+#define	SPI_SE		(0xD8)	/*Erase one sector in memory */
+#define	SPI_BE		(0xC7)	/*Erase all memory */
+#define	WIP		(0x1)	/*Check the write in progress bit of the SPI status register */
+#define	WEL		(0x2)	/*Check the write enable bit of the SPI status register */
+
+#define	TIMEOUT		350000000
+
+typedef enum {
+	NO_ERR,
+	POLL_TIMEOUT,
+	INVALID_SECTOR,
+	INVALID_BLOCK,
+} ERROR_CODE;
+
+void spi_init_f(void);
+void spi_init_r(void);
+ssize_t spi_read(uchar *, int, uchar *, int);
+ssize_t spi_write(uchar *, int, uchar *, int);
+
+char ReadStatusRegister(void);
+void Wait_For_SPIF(void);
+void SetupSPI(const int spi_setting);
+void SPI_OFF(void);
+void SendSingleCommand(const int iCommand);
+
+ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector);
+ERROR_CODE EraseBlock(int nBlock);
+ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData);
+ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData);
+ERROR_CODE Wait_For_Status(char Statusbit);
+ERROR_CODE Wait_For_WEL(void);
+
+/*
+ * Function:    spi_init_f
+ * Description: Init SPI-Controller (ROM part)
+ * return:      ---
+ */
+void spi_init_f(void)
+{
+}
+
+/*
+ * Function:    spi_init_r
+ * Description: Init SPI-Controller (RAM part) -
+ *		 The malloc engine is ready and we can move our buffers to
+ *		 normal RAM
+ *  return:      ---
+ */
+void spi_init_r(void)
+{
+	return;
+}
+
+/*
+ * Function:    spi_write
+ */
+ssize_t spi_write(uchar * addr, int alen, uchar * buffer, int len)
+{
+	unsigned long offset;
+	int start_block, end_block;
+	int start_byte, end_byte;
+	ERROR_CODE result = NO_ERR;
+	uchar temp[SECTOR_SIZE];
+	int i, num;
+
+	offset = addr[0] << 16 | addr[1] << 8 | addr[2];
+	/* Get the start block number */
+	result = GetSectorNumber(offset, &start_block);
+	if (result == INVALID_SECTOR) {
+		printf("Invalid sector! ");
+		return 0;
+	}
+	/* Get the end block number */
+	result = GetSectorNumber(offset + len - 1, &end_block);
+	if (result == INVALID_SECTOR) {
+		printf("Invalid sector! ");
+		return 0;
+	}
+
+	for (num = start_block; num <= end_block; num++) {
+		ReadData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp);
+		start_byte = num * SECTOR_SIZE;
+		end_byte = (num + 1) * SECTOR_SIZE - 1;
+		if (start_byte < offset)
+			start_byte = offset;
+		if (end_byte > (offset + len))
+			end_byte = (offset + len - 1);
+		for (i = start_byte; i <= end_byte; i++)
+			temp[i - num * SECTOR_SIZE] = buffer[i - offset];
+		EraseBlock(num);
+		result = WriteData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp);
+		if (result != NO_ERR)
+			return 0;
+		printf(".");
+	}
+	return len;
+}
+
+/*
+ * Function: spi_read
+ */
+ssize_t spi_read(uchar * addr, int alen, uchar * buffer, int len)
+{
+	unsigned long offset;
+	offset = addr[0] << 16 | addr[1] << 8 | addr[2];
+	ReadData(offset, len, (int *)buffer);
+	return len;
+}
+
+void SendSingleCommand(const int iCommand)
+{
+	unsigned short dummy;
+
+	/* turns on the SPI in single write mode */
+	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
+
+	/* sends the actual command to the SPI TX register */
+	*pSPI_TDBR = iCommand;
+	sync();
+
+	/* The SPI status register will be polled to check the SPIF bit */
+	Wait_For_SPIF();
+
+	dummy = *pSPI_RDBR;
+
+	/* The SPI will be turned off */
+	SPI_OFF();
+
+}
+
+void SetupSPI(const int spi_setting)
+{
+
+	if (icache_status() || dcache_status())
+		udelay(CONFIG_CCLK_HZ / 50000000);
+	/*sets up the PF10 to be the slave select of the SPI */
+	*pPORTF_FER |= (PF10 | PF11 | PF12 | PF13);
+	*pSPI_FLG = 0xFF02;
+	*pSPI_BAUD = CONFIG_SPI_BAUD;
+	*pSPI_CTL = spi_setting;
+	sync();
+
+	*pSPI_FLG = 0xFD02;
+	sync();
+}
+
+void SPI_OFF(void)
+{
+
+	*pSPI_CTL = 0x0400;	/* disable SPI */
+	*pSPI_FLG = 0;
+	*pSPI_BAUD = 0;
+	sync();
+	udelay(CONFIG_CCLK_HZ / 50000000);
+
+}
+
+void Wait_For_SPIF(void)
+{
+	unsigned short dummyread;
+	while ((*pSPI_STAT & TXS)) ;
+	while (!(*pSPI_STAT & SPIF)) ;
+	while (!(*pSPI_STAT & RXS)) ;
+	/* Read dummy to empty the receive register */
+	dummyread = *pSPI_RDBR;
+}
+
+ERROR_CODE Wait_For_WEL(void)
+{
+	int i;
+	char status_register = 0;
+	ERROR_CODE ErrorCode = NO_ERR;
+
+	for (i = 0; i < TIMEOUT; i++) {
+		status_register = ReadStatusRegister();
+		if ((status_register & WEL)) {
+			ErrorCode = NO_ERR;
+			break;
+		}
+		ErrorCode = POLL_TIMEOUT;	/* Time out error */
+	};
+
+	return ErrorCode;
+}
+
+ERROR_CODE Wait_For_Status(char Statusbit)
+{
+	int i;
+	char status_register = 0xFF;
+	ERROR_CODE ErrorCode = NO_ERR;
+
+	for (i = 0; i < TIMEOUT; i++) {
+		status_register = ReadStatusRegister();
+		if (!(status_register & Statusbit)) {
+			ErrorCode = NO_ERR;
+			break;
+		}
+		ErrorCode = POLL_TIMEOUT;	/* Time out error */
+	};
+
+	return ErrorCode;
+}
+
+char ReadStatusRegister(void)
+{
+	char status_register = 0;
+
+	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));	/* Turn on the SPI */
+
+	*pSPI_TDBR = SPI_RDSR;	/* send instruction to read status register */
+	sync();
+	Wait_For_SPIF();	/*wait until the instruction has been sent */
+	*pSPI_TDBR = 0;		/*send dummy to receive the status register */
+	sync();
+	Wait_For_SPIF();	/*wait until the data has been sent */
+	status_register = *pSPI_RDBR;	/*read the status register */
+
+	SPI_OFF();		/* Turn off the SPI */
+
+	return status_register;
+}
+
+ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector)
+{
+	int nSector = 0;
+	ERROR_CODE ErrorCode = NO_ERR;
+
+	if (ulOffset > (NUM_SECTORS * 0x10000 - 1)) {
+		ErrorCode = INVALID_SECTOR;
+		return ErrorCode;
+	}
+
+	nSector = (int)ulOffset / 0x10000;
+	*pnSector = nSector;
+
+	return ErrorCode;
+}
+
+ERROR_CODE EraseBlock(int nBlock)
+{
+	unsigned long ulSectorOff = 0x0, ShiftValue;
+	ERROR_CODE ErrorCode = NO_ERR;
+
+	/* if the block is invalid just return */
+	if ((nBlock < 0) || (nBlock > NUM_SECTORS)) {
+		ErrorCode = INVALID_BLOCK;
+		return ErrorCode;
+	}
+	/* figure out the offset of the block in flash */
+	if ((nBlock >= 0) && (nBlock < NUM_SECTORS)) {
+		ulSectorOff = (nBlock * SECTOR_SIZE);
+
+	} else {
+		ErrorCode = INVALID_BLOCK;
+		return ErrorCode;
+	}
+
+	/* A write enable instruction must previously have been executed */
+	SendSingleCommand(SPI_WREN);
+
+	/* The status register will be polled to check the write enable latch "WREN" */
+	ErrorCode = Wait_For_WEL();
+
+	if (POLL_TIMEOUT == ErrorCode) {
+		printf("SPI Erase block error\n");
+		return ErrorCode;
+	} else
+
+	/* Turn on the SPI to send single commands */
+	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
+
+	/*
+	 * Send the erase block command to the flash followed by the 24 address
+	 * to point to the start of a sector
+	 */
+	*pSPI_TDBR = SPI_SE;
+	sync();
+	Wait_For_SPIF();
+	/* Send the highest byte of the 24 bit address at first */
+	ShiftValue = (ulSectorOff >> 16);
+	*pSPI_TDBR = ShiftValue;
+	sync();
+	/* Wait until the instruction has been sent */
+	Wait_For_SPIF();
+	/* Send the middle byte of the 24 bit address  at second */
+	ShiftValue = (ulSectorOff >> 8);
+	*pSPI_TDBR = ShiftValue;
+	sync();
+	/* Wait until the instruction has been sent */
+	Wait_For_SPIF();
+	/* Send the lowest byte of the 24 bit address finally */
+	*pSPI_TDBR = ulSectorOff;
+	sync();
+	/* Wait until the instruction has been sent */
+	Wait_For_SPIF();
+
+	/* Turns off the SPI */
+	SPI_OFF();
+
+	/* Poll the status register to check the Write in Progress bit */
+	/* Sector erase takes time */
+	ErrorCode = Wait_For_Status(WIP);
+
+	/* block erase should be complete */
+	return ErrorCode;
+}
+
+/*
+ * ERROR_CODE ReadData()
+ * Read a value from flash for verify purpose
+ * Inputs:	unsigned long ulStart - holds the SPI start address
+ *			int pnData - pointer to store value read from flash
+ *			long lCount - number of elements to read
+ */
+ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData)
+{
+	unsigned long ShiftValue;
+	char *cnData;
+	int i;
+
+	/* Pointer cast to be able to increment byte wise */
+
+	cnData = (char *)pnData;
+	/* Start SPI interface */
+	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
+
+#ifdef CONFIG_SPI_FLASH_FAST_READ
+	/* Send the read command to SPI device */
+	*pSPI_TDBR = SPI_FAST_READ;
+#else
+	/* Send the read command to SPI device */
+	*pSPI_TDBR = SPI_READ;
+#endif
+	sync();
+	/* Wait until the instruction has been sent */
+	Wait_For_SPIF();
+	/* Send the highest byte of the 24 bit address at first */
+	ShiftValue = (ulStart >> 16);
+	/* Send the byte to the SPI device */
+	*pSPI_TDBR = ShiftValue;
+	sync();
+	/* Wait until the instruction has been sent */
+	Wait_For_SPIF();
+	/* Send the middle byte of the 24 bit address  at second */
+	ShiftValue = (ulStart >> 8);
+	/* Send the byte to the SPI device */
+	*pSPI_TDBR = ShiftValue;
+	sync();
+	/* Wait until the instruction has been sent */
+	Wait_For_SPIF();
+	/* Send the lowest byte of the 24 bit address finally */
+	*pSPI_TDBR = ulStart;
+	sync();
+	/* Wait until the instruction has been sent */
+	Wait_For_SPIF();
+
+#ifdef CONFIG_SPI_FLASH_FAST_READ
+	/* Send dummy for FAST_READ */
+	*pSPI_TDBR = 0;
+	sync();
+	/* Wait until the instruction has been sent */
+	Wait_For_SPIF();
+#endif
+
+	/* After the SPI device address has been placed on the MOSI pin the data can be */
+	/* received on the MISO pin. */
+	for (i = 0; i < lCount; i++) {
+		*pSPI_TDBR = 0;
+		sync();
+		while (!(*pSPI_STAT & RXS)) ;
+		*cnData++ = *pSPI_RDBR;
+
+		if ((i >= SECTOR_SIZE) && (i % SECTOR_SIZE == 0))
+			printf(".");
+	}
+
+	/* Turn off the SPI */
+	SPI_OFF();
+
+	return NO_ERR;
+}
+
+ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount,
+		      int *iDataSource, long *lWriteCount)
+{
+
+	unsigned long ulWAddr;
+	long lWTransferCount = 0;
+	int i;
+	char iData;
+	char *temp = (char *)iDataSource;
+	ERROR_CODE ErrorCode = NO_ERR;
+
+	/* First, a Write Enable Command must be sent to the SPI. */
+	SendSingleCommand(SPI_WREN);
+
+	/*
+	 * Second, the SPI Status Register will be tested whether the
+	 * Write Enable Bit has been set
+	 */
+	ErrorCode = Wait_For_WEL();
+	if (POLL_TIMEOUT == ErrorCode) {
+		printf("SPI Write Time Out\n");
+		return ErrorCode;
+	} else
+		/* Third, the 24 bit address will be shifted out
+		 * the SPI MOSI bytewise.
+		 * Turns the SPI on
+		 */
+		SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
+	*pSPI_TDBR = SPI_PP;
+	sync();
+	/*wait until the instruction has been sent */
+	Wait_For_SPIF();
+	ulWAddr = (ulStartAddr >> 16);
+	*pSPI_TDBR = ulWAddr;
+	sync();
+	/*wait until the instruction has been sent */
+	Wait_For_SPIF();
+	ulWAddr = (ulStartAddr >> 8);
+	*pSPI_TDBR = ulWAddr;
+	sync();
+	/*wait until the instruction has been sent */
+	Wait_For_SPIF();
+	ulWAddr = ulStartAddr;
+	*pSPI_TDBR = ulWAddr;
+	sync();
+	/*wait until the instruction has been sent */
+	Wait_For_SPIF();
+	/*
+	 * Fourth, maximum number of 256 bytes will be taken from the Buffer
+	 * and sent to the SPI device.
+	 */
+	for (i = 0; (i < lTransferCount) && (i < 256); i++, lWTransferCount++) {
+		iData = *temp;
+		*pSPI_TDBR = iData;
+		sync();
+		/*wait until the instruction has been sent */
+		Wait_For_SPIF();
+		temp++;
+	}
+
+	/* Turns the SPI off */
+	SPI_OFF();
+
+	/*
+	 * Sixth, the SPI Write in Progress Bit must be toggled to ensure the
+	 * programming is done before start of next transfer
+	 */
+	ErrorCode = Wait_For_Status(WIP);
+
+	if (POLL_TIMEOUT == ErrorCode) {
+		printf("SPI Program Time out!\n");
+		return ErrorCode;
+	} else
+
+		*lWriteCount = lWTransferCount;
+
+	return ErrorCode;
+}
+
+ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData)
+{
+
+	unsigned long ulWStart = ulStart;
+	long lWCount = lCount, lWriteCount;
+	long *pnWriteCount = &lWriteCount;
+
+	ERROR_CODE ErrorCode = NO_ERR;
+
+	while (lWCount != 0) {
+		ErrorCode = WriteFlash(ulWStart, lWCount, pnData, pnWriteCount);
+
+		/*
+		 * After each function call of WriteFlash the counter
+		 * must be adjusted
+		 */
+		lWCount -= *pnWriteCount;
+
+		/* Also, both address pointers must be recalculated. */
+		ulWStart += *pnWriteCount;
+		pnData += *pnWriteCount / 4;
+	}
+
+	/* return the appropriate error code */
+	return ErrorCode;
+}
+
+#endif				/* CONFIG_SPI */

board/bf537-stamp/u-boot.lds.S

@@ -0,0 +1,190 @@
+/*
+ * U-boot - u-boot.lds.S
+ *
+ * Copyright (c) 2005-2007 Analog Device Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+OUTPUT_ARCH(bfin)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+MEMORY
+ {
+ ram : 	   ORIGIN = (CFG_MONITOR_BASE), LENGTH = (256 * 1024)
+ l1_code : ORIGIN = 0xFFA00000, LENGTH = 0xC000
+ l1_data : ORIGIN = 0xFF900000, LENGTH = 0x4000
+ }
+
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS; /*0x1000;*/
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt : { *(.plt) }
+  . = CFG_MONITOR_BASE;
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector before the environment sector. If it throws 	*/
+    /* an error during compilation remove an object here to get	*/
+    /* it linked after the configuration sector.		*/
+
+    cpu/bf537/start.o		(.text)
+    cpu/bf537/start1.o		(.text)
+    cpu/bf537/traps.o		(.text)
+    cpu/bf537/interrupt.o	(.text)
+    cpu/bf537/serial.o		(.text)
+    common/dlmalloc.o		(.text)
+/*  lib_blackfin/bf533_string.o	(.text) */
+/*  lib_generic/vsprintf.o	(.text) */
+    lib_generic/crc32.o		(.text)
+/*  lib_generic/zlib.o		(.text) */
+/*  board/bf537-stamp/bf537-stamp.o		(.text) */
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o	(.text)
+
+    *(EXCLUDE_FILE (board/bf537-stamp/post-memory.o) .text)
+    *(.fixup)
+    *(.got1)
+  }  > ram
+  _etext = .;
+  PROVIDE (etext = .);
+  .text_l1	:
+  {
+  . = ALIGN(4) ;
+  _text_l1 = .;
+  PROVIDE (text_l1 = .);
+  board/bf537-stamp/post-memory.o   (.text)
+  . = ALIGN(4) ;
+  _etext_l1 = .;
+  PROVIDE (etext_l1 = .);
+  } > l1_code AT > ram
+
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(EXCLUDE_FILE (board/bf537-stamp/post-memory.o) .rodata)
+    *(EXCLUDE_FILE (board/bf537-stamp/post-memory.o) .rodata1)
+    *(EXCLUDE_FILE (board/bf537-stamp/post-memory.o) .rodata.str1.4)
+    *(.eh_frame)
+    . = ALIGN(4);
+  } > ram
+
+  . = ALIGN(4);
+  _erodata = .;
+  PROVIDE (erodata = .);
+  .rodata_l1 :
+ {
+   . = ALIGN(4) ;
+   _rodata_l1 = .;
+   PROVIDE (rodata_l1 = .);
+   board/bf537-stamp/post-memory.o (.rodata)
+   board/bf537-stamp/post-memory.o (.rodata1)
+   board/bf537-stamp/post-memory.o (.rodata.str1.4)
+   . = ALIGN(4) ;
+   _erodata_l1 = .;
+   PROVIDE(erodata_l1 = .);
+ } > l1_data AT > ram
+
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  } > ram
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  ___u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) } > ram
+  ___u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  .bss       :
+  {
+  __bss_start = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  } > ram
+  _end = . ;
+  PROVIDE (end = .);
+}

board/bf561-ezkit/Makefile

@@ -1,7 +1,7 @@
 #
 # U-boot - Makefile
 #
-# Copyright (c) 2005 blackfin.uclinux.org
+# Copyright (c) 2005-2007 Analog Device Inc.
 #
 # (C) Copyright 2000-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -29,14 +29,24 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o ezkit533.o
+COBJS	:= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS)
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
-	$(AR) $(ARFLAGS) $@ $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp
+	mv -f $@.tmp $@
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
 
 #########################################################################
 

board/bf561-ezkit/bf561-ezkit.c

@@ -0,0 +1,73 @@
+/*
+ * U-boot - ezkit561.c
+ *
+ * Copyright (c) 2005 Bas Vermeulen <bas@buyways.nl>
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+int checkboard(void)
+{
+	printf("CPU:   ADSP BF561\n");
+	printf("Board: ADI BF561 EZ-Kit Lite board\n");
+	printf("       Support: http://blackfin.uclinux.org/\n");
+	return 0;
+}
+
+long int initdram(int board_type)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+#ifdef DEBUG
+	int brate;
+	char *tmp = getenv("baudrate");
+	brate = simple_strtoul(tmp, NULL, 16);
+	printf("Serial Port initialized with Baud rate = %x\n", brate);
+	printf("SDRAM attributes:\n");
+	printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
+	       "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
+	       3, 3, 6, 2, 3);
+	printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
+	printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
+#endif
+	gd->bd->bi_memstart = CFG_SDRAM_BASE;
+	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
+	return CFG_MAX_RAM_SIZE;
+}
+
+#if defined(CONFIG_MISC_INIT_R)
+/* miscellaneous platform dependent initialisations */
+int misc_init_r(void)
+{
+	/* Keep PF12 low to be able to drive the USB-LAN Extender */
+	*pFIO0_DIR = 0x0000;
+	*pFIO0_FLAG_C = 0x1000;	/* Clear PF12 */
+	sync();
+	*pFIO0_POLAR = 0x0000;
+	sync();
+
+	return 0;
+}
+#endif

board/bf561-ezkit/config.mk

@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes
+#  256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h
+TEXT_BASE = 0x03FC0000

board/bf561-ezkit/u-boot.lds.S

@@ -0,0 +1,153 @@
+/*
+ * U-boot - u-boot.lds.S
+ *
+ * Copyright (c) 2005-2007 Analog Device Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+OUTPUT_ARCH(bfin)
+OUTPUT_ARCH(bfin)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash		: { *(.hash)		}
+  .dynsym	: { *(.dynsym)		}
+  .dynstr	: { *(.dynstr)		}
+  .rel.text	: { *(.rel.text)	}
+  .rela.text	: { *(.rela.text) 	}
+  .rel.data	: { *(.rel.data)	}
+  .rela.data	: { *(.rela.data) 	}
+  .rel.rodata	: { *(.rel.rodata) 	}
+  .rela.rodata	: { *(.rela.rodata) 	}
+  .rel.got	: { *(.rel.got)		}
+  .rela.got	: { *(.rela.got)	}
+  .rel.ctors	: { *(.rel.ctors)	}
+  .rela.ctors	: { *(.rela.ctors)	}
+  .rel.dtors	: { *(.rel.dtors)	}
+  .rela.dtors	: { *(.rela.dtors)	}
+  .rel.bss	: { *(.rel.bss)	}
+  .rela.bss	: { *(.rela.bss)	}
+  .rel.plt	: { *(.rel.plt)	}
+  .rela.plt	: { *(.rela.plt)	}
+  .init		: { *(.init)		}
+  .plt : { *(.plt) }
+  . = CFG_MONITOR_BASE;
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector before the environment sector. If it throws 	*/
+    /* an error during compilation remove an object here to get	*/
+    /* it linked after the configuration sector.		*/
+
+    cpu/bf561/start.o		(.text)
+    cpu/bf561/start1.o		(.text)
+    cpu/bf561/traps.o		(.text)
+    cpu/bf561/interrupt.o	(.text)
+    cpu/bf561/serial.o		(.text)
+    common/dlmalloc.o		(.text)
+/*  lib_blackfin/bf533_string.o	(.text) */
+/*  lib_generic/vsprintf.o	(.text) */
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+    board/bf561-ezkit/bf561-ezkit.o		(.text)
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  ___u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  ___u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/mpc8641hpcn/u-boot.lds

@@ -120,10 +120,12 @@ SECTIONS
   _edata  =  .;
   PROVIDE (edata = .);
 
+  . = .;
   __u_boot_cmd_start = .;
   .u_boot_cmd : { *(.u_boot_cmd) }
   __u_boot_cmd_end = .;
 
+  . = .;
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;

board/sc3/Makefile

@@ -23,13 +23,17 @@
 
 include $(TOPDIR)/config.mk
 
-LIB	= lib$(BOARD).a
+LIB	= $(obj)lib$(BOARD).a
 
-OBJS	= $(BOARD).o sc3nand.o
+COBJS	= $(BOARD).o sc3nand.o
 SOBJS	= init.o
 
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
 $(LIB):	$(OBJS) $(SOBJS)
-	$(AR) crv $@ $^
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
 clean:
 	rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean:	clean
 
 #########################################################################
 
-.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+# defines $(obj).depend target
-		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+include $(SRCTREE)/rules.mk
 
-sinclude .depend
+sinclude $(obj).depend
 
 #########################################################################

board/tqm8272/tqm8272.c

@@ -768,7 +768,7 @@ int analyse_hwib (void)
 	p +=1;
 	p +=1;	/* connector */
 	if (*p != '0') {
-		hw->eeprom = 0x100 << (*p - 'A');
+		hw->eeprom = 0x1000 << (*p - 'A');
 	}
 	p++;
 

common/cmd_bootm.c

@@ -242,26 +242,26 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	len_ptr = (ulong *)data;
 
-#if defined(__PPC__)
+#if defined(__ARM__)
-	if (hdr->ih_arch != IH_CPU_PPC)
-#elif defined(__ARM__)
 	if (hdr->ih_arch != IH_CPU_ARM)
+#elif defined(__avr32__)
+	if (hdr->ih_arch != IH_CPU_AVR32)
+#elif defined(__bfin__)
+	if (hdr->ih_arch != IH_CPU_BLACKFIN)
 #elif defined(__I386__)
 	if (hdr->ih_arch != IH_CPU_I386)
-#elif defined(__mips__)
-	if (hdr->ih_arch != IH_CPU_MIPS)
-#elif defined(__nios__)
-	if (hdr->ih_arch != IH_CPU_NIOS)
 #elif defined(__M68K__)
 	if (hdr->ih_arch != IH_CPU_M68K)
 #elif defined(__microblaze__)
 	if (hdr->ih_arch != IH_CPU_MICROBLAZE)
+#elif defined(__mips__)
+	if (hdr->ih_arch != IH_CPU_MIPS)
+#elif defined(__nios__)
+	if (hdr->ih_arch != IH_CPU_NIOS)
 #elif defined(__nios2__)
 	if (hdr->ih_arch != IH_CPU_NIOS2)
-#elif defined(__blackfin__)
+#elif defined(__PPC__)
-	if (hdr->ih_arch != IH_CPU_BLACKFIN)
+	if (hdr->ih_arch != IH_CPU_PPC)
-#elif defined(__avr32__)
-	if (hdr->ih_arch != IH_CPU_AVR32)
 #else
 # error Unknown CPU type
 #endif
@@ -1354,19 +1354,20 @@ print_type (image_header_t *hdr)
 	case IH_CPU_ALPHA:	arch = "Alpha";			break;
 	case IH_CPU_ARM:	arch = "ARM";			break;
 	case IH_CPU_AVR32:	arch = "AVR32";			break;
+	case IH_CPU_BLACKFIN:	arch = "Blackfin";		break;
 	case IH_CPU_I386:	arch = "Intel x86";		break;
 	case IH_CPU_IA64:	arch = "IA64";			break;
-	case IH_CPU_MIPS:	arch = "MIPS";			break;
+	case IH_CPU_M68K:	arch = "M68K"; 			break;
+	case IH_CPU_MICROBLAZE:	arch = "Microblaze"; 		break;
 	case IH_CPU_MIPS64:	arch = "MIPS 64 Bit";		break;
+	case IH_CPU_MIPS:	arch = "MIPS";			break;
+	case IH_CPU_NIOS2:	arch = "Nios-II";		break;
+	case IH_CPU_NIOS:	arch = "Nios";			break;
 	case IH_CPU_PPC:	arch = "PowerPC";		break;
 	case IH_CPU_S390:	arch = "IBM S390";		break;
 	case IH_CPU_SH:		arch = "SuperH";		break;
-	case IH_CPU_SPARC:	arch = "SPARC";			break;
 	case IH_CPU_SPARC64:	arch = "SPARC 64 Bit";		break;
-	case IH_CPU_M68K:	arch = "M68K"; 			break;
+	case IH_CPU_SPARC:	arch = "SPARC";			break;
-	case IH_CPU_MICROBLAZE:	arch = "Microblaze"; 		break;
-	case IH_CPU_NIOS:	arch = "Nios";			break;
-	case IH_CPU_NIOS2:	arch = "Nios-II";		break;
 	default:		arch = "Unknown Architecture";	break;
 	}
 

config.mk

@@ -70,7 +70,7 @@ endif
 endif
 
 ifeq ($(ARCH),blackfin)
-PLATFORM_CPPFLAGS+= -D__BLACKFIN__ -mno-underscore
+PLATFORM_CPPFLAGS+= -D__BLACKFIN__
 endif
 
 ifdef	ARCH

cpu/bf533/Makefile

@@ -28,14 +28,16 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(CPU).a
 
-START	= start.o start1.o interrupt.o cache.o cplbhdlr.o cplbmgr.o flush.o
+START	= start.o start1.o interrupt.o cache.o flush.o init_sdram.o
-COBJS	= cpu.o traps.o ints.o serial.o interrupts.o
+COBJS	= cpu.o traps.o ints.o serial.o interrupts.o video.o
+
+EXTRA = init_sdram_bootrom_initblock.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
 START	:= $(addprefix $(obj),$(START))
 
-all:	$(obj).depend $(START) $(LIB)
+all:	$(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA)
 
 $(LIB):	$(OBJS)
 	$(AR) $(ARFLAGS) $@ $(OBJS)

cpu/bf533/bf533_serial.h

@@ -63,8 +63,7 @@ int serial_getc(void);
 void serial_puts(const char *s);
 static void local_put_char(char ch);
 
-extern int get_clock(void);
+int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 };
-int baud_table[5] = {9600, 19200, 38400, 57600, 115200};
 
 struct {
 	unsigned char dl_high;

cpu/bf533/cache.S

@@ -1,12 +1,11 @@
-
-
 #define ASSEMBLY
 #include <asm/linkage.h>
-#include <asm/cpu/def_LPBlackfin.h>
+#include <config.h>
+#include <asm/blackfin.h>
 
 .text
 .align 2
-ENTRY(blackfin_icache_flush_range)
+ENTRY(_blackfin_icache_flush_range)
 	R2 = -32;
 	R2 = R0 & R2;
 	P0 = R2;
@@ -20,7 +19,7 @@ ENTRY(blackfin_icache_flush_range)
 	SSYNC;
 	RTS;
 
-ENTRY(blackfin_dcache_flush_range)
+ENTRY(_blackfin_dcache_flush_range)
 	R2 = -32;
 	R2 = R0 & R2;
 	P0 = R2;
@@ -35,19 +34,21 @@ ENTRY(blackfin_dcache_flush_range)
 	RTS;
 
 ENTRY(_icache_invalidate)
-ENTRY(invalidate_entire_icache)
+ENTRY(_invalidate_entire_icache)
-	[--SP] = ( R7:5);
+	[--SP] = (R7:5);
 
 	P0.L = (IMEM_CONTROL & 0xFFFF);
 	P0.H = (IMEM_CONTROL >> 16);
-	R7 = [P0];
+	R7 =[P0];
 
-	/* Clear the IMC bit , All valid bits in the instruction
+	/*
+	 * Clear the IMC bit , All valid bits in the instruction
 	 * cache are set to the invalid state
 	 */
-	BITCLR(R7,IMC_P);
+	BITCLR(R7, IMC_P);
 	CLI R6;
-	SSYNC;		/* SSYNC required before invalidating cache. */
+	/* SSYNC required before invalidating cache. */
+	SSYNC;
 	.align 8;
 	[P0] = R7;
 	SSYNC;
@@ -58,54 +59,55 @@ ENTRY(invalidate_entire_icache)
 	R7 = R7 | R6;
 
 	CLI R6;
-	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
+	SSYNC;
 	.align 8;
 	[P0] = R7;
 	SSYNC;
 	STI R6;
 
-	( R7:5) = [SP++];
+	(R7:5) =[SP++];
 	RTS;
 
-/* Invalidate the Entire Data cache by
+/*
+ * Invalidate the Entire Data cache by
  * clearing DMC[1:0] bits
  */
-ENTRY(invalidate_entire_dcache)
+ENTRY(_invalidate_entire_dcache)
 ENTRY(_dcache_invalidate)
-	[--SP] = ( R7:6);
+	[--SP] = (R7:6);
 
 	P0.L = (DMEM_CONTROL & 0xFFFF);
 	P0.H = (DMEM_CONTROL >> 16);
-	R7 = [P0];
+	R7 =[P0];
 
-	/* Clear the DMC[1:0] bits, All valid bits in the data
+	/*
+	 * Clear the DMC[1:0] bits, All valid bits in the data
 	 * cache are set to the invalid state
 	 */
-	BITCLR(R7,DMC0_P);
+	BITCLR(R7, DMC0_P);
-	BITCLR(R7,DMC1_P);
+	BITCLR(R7, DMC1_P);
 	CLI R6;
-	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
+	SSYNC;
 	.align 8;
 	[P0] = R7;
 	SSYNC;
 	STI R6;
-
 	/* Configures the data cache again */
 
 	R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
 	R7 = R7 | R6;
 
 	CLI R6;
-	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
+	SSYNC;
 	.align 8;
 	[P0] = R7;
 	SSYNC;
 	STI R6;
 
-	( R7:6) = [SP++];
+	(R7:6) =[SP++];
 	RTS;
 
-ENTRY(blackfin_dcache_invalidate_range)
+ENTRY(_blackfin_dcache_invalidate_range)
 	R2 = -32;
 	R2 = R0 & R2;
 	P0 = R2;
@@ -113,13 +115,14 @@ ENTRY(blackfin_dcache_invalidate_range)
 	CSYNC;
 1:
 	FLUSHINV[P0++];
-	CC = P0 < P1 (iu);
+	CC = P0 < P1(iu);
-	IF CC JUMP 1b (bp);
+	IF CC JUMP 1b(bp);
 
-	/* If the data crosses a cache line, then we'll be pointing to
+	/*
-	** the last cache line, but won't have flushed/invalidated it yet, so do
+	 * If the data crosses a cache line, then we'll be pointing to
-	** one more.
+	 * the last cache line, but won't have flushed/invalidated it yet, so do
-	*/
+	 * one more.
+	 */
 	FLUSHINV[P0];
 	SSYNC;
 	RTS;

cpu/bf533/config.mk

@@ -24,4 +24,4 @@
 # MA 02111-1307 USA
 #
 
-PLATFORM_RELFLAGS += -ffixed-P5
+PLATFORM_RELFLAGS += -mcpu=bf533 -ffixed-P5

cpu/bf533/cplbhdlr.S

@@ -1,193 +0,0 @@
-/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.
- *
- * Blackfin BF533/2.6 support : LG Soft India
- */
-
-
-/* Include an exception handler to invoke the CPLB manager
- */
-
-#include <asm-blackfin/linkage.h>
-#include <asm/cplb.h>
-#include <asm/entry.h>
-
-
-.text
-
-.globl _cplb_hdr;
-.type _cplb_hdr, STT_FUNC;
-.extern _cplb_mgr;
-.type _cplb_mgr, STT_FUNC;
-.extern __unknown_exception_occurred;
-.type __unknown_exception_occurred, STT_FUNC;
-.extern __cplb_miss_all_locked;
-.type __cplb_miss_all_locked, STT_FUNC;
-.extern __cplb_miss_without_replacement;
-.type __cplb_miss_without_replacement, STT_FUNC;
-.extern __cplb_protection_violation;
-.type __cplb_protection_violation, STT_FUNC;
-.extern panic_pv;
-
-.align 2;
-
-ENTRY(_cplb_hdr)
-	SSYNC;
-	[--SP] = ( R7:0, P5:0 );
-	[--SP] = ASTAT;
-	[--SP] = SEQSTAT;
-	[--SP] = I0;
-	[--SP] = I1;
-	[--SP] = I2;
-	[--SP] = I3;
-	[--SP] = LT0;
-	[--SP] = LB0;
-	[--SP] = LC0;
-	[--SP] = LT1;
-	[--SP] = LB1;
-	[--SP] = LC1;
-	R2 = SEQSTAT;
-
-	/*Mask the contents of SEQSTAT and leave only EXCAUSE in R2*/
-	R2 <<= 26;
-	R2 >>= 26;
-
-	R1 = 0x23; /* Data access CPLB protection violation */
-	CC = R2 == R1;
-	IF !CC JUMP not_data_write;
-	R0 = 2;		/* is a write to data space*/
-	JUMP is_icplb_miss;
-
-not_data_write:
-	R1 = 0x2C; /* CPLB miss on an instruction fetch */
-	CC = R2 == R1;
-	R0 = 0;		/* is_data_miss == False*/
-	IF CC JUMP is_icplb_miss;
-
-	R1 = 0x26;
-	CC = R2 == R1;
-	IF !CC JUMP unknown;
-
-	R0 = 1;		/* is_data_miss == True*/
-
-is_icplb_miss:
-
-#if ( defined (CONFIG_BLKFIN_CACHE) || defined (CONFIG_BLKFIN_DCACHE))
-#if ( defined (CONFIG_BLKFIN_CACHE) && !defined (CONFIG_BLKFIN_DCACHE))
-	R1 = CPLB_ENABLE_ICACHE;
-#endif
-#if ( !defined (CONFIG_BLKFIN_CACHE) && defined (CONFIG_BLKFIN_DCACHE))
-	R1 = CPLB_ENABLE_DCACHE;
-#endif
-#if ( defined (CONFIG_BLKFIN_CACHE) && defined (CONFIG_BLKFIN_DCACHE))
-	R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE;
-#endif
-#else
-	R1 = 0;
-#endif
-
-	[--SP] = RETS;
-	CALL _cplb_mgr;
-	RETS = [SP++];
-	CC = R0 == 0;
-	IF !CC JUMP not_replaced;
-	LC1 = [SP++];
-	LB1 = [SP++];
-	LT1 = [SP++];
-	LC0 = [SP++];
-	LB0 = [SP++];
-	LT0 = [SP++];
-	I3 = [SP++];
-	I2 = [SP++];
-	I1 = [SP++];
-	I0 = [SP++];
-	SEQSTAT = [SP++];
-	ASTAT = [SP++];
-	( R7:0, P5:0 ) = [SP++];
-	RTS;
-
-unknown:
-	[--SP] = RETS;
-	CALL __unknown_exception_occurred;
-	RETS = [SP++];
-	JUMP unknown;
-not_replaced:
-	CC = R0 == CPLB_NO_UNLOCKED;
-	IF !CC JUMP next_check;
-	[--SP] = RETS;
-	CALL __cplb_miss_all_locked;
-	RETS = [SP++];
-next_check:
-	CC = R0 == CPLB_NO_ADDR_MATCH;
-	IF !CC JUMP next_check2;
-	[--SP] = RETS;
-	CALL __cplb_miss_without_replacement;
-	RETS = [SP++];
-	JUMP not_replaced;
-next_check2:
-	CC = R0 == CPLB_PROT_VIOL;
-	IF !CC JUMP strange_return_from_cplb_mgr;
-	[--SP] = RETS;
-	CALL __cplb_protection_violation;
-	RETS = [SP++];
-	JUMP not_replaced;
-strange_return_from_cplb_mgr:
-	IDLE;
-	CSYNC;
-	JUMP strange_return_from_cplb_mgr;
-
-/************************************
- * Diagnostic exception handlers
- */
-
-__cplb_miss_all_locked:
-	sp += -12;
-	R0 = CPLB_NO_UNLOCKED;
-	call panic_bfin;
-	SP += 12;
-	RTS;
-
- __cplb_miss_without_replacement:
-	sp += -12;
-	R0 = CPLB_NO_ADDR_MATCH;
-	call panic_bfin;
-	SP += 12;
-	RTS;
-
-__cplb_protection_violation:
-	sp += -12;
-	R0 = CPLB_PROT_VIOL;
-	call panic_bfin;
-	SP += 12;
-	RTS;
-
-__unknown_exception_occurred:
-
-	/* This function is invoked by the default exception
-	 * handler, if it does not recognise the kind of
-	 * exception that has occurred. In other words, the
-	 * default handler only handles some of the system's
-	 * exception types, and it does not expect any others
-	 * to occur. If your application is going to be using
-	 * other kinds of exceptions, you must replace the
-	 * default handler with your own, that handles all the
-	 * exceptions you will use.
-	 *
-	 * Since there's nothing we can do, we just loop here
-	 * at what we hope is a suitably informative label.
-	 */
-
-	IDLE;
-do_not_know_what_to_do:
-	CSYNC;
-	JUMP __unknown_exception_occurred;
-
-	RTS;
-.__unknown_exception_occurred.end:
-.global __unknown_exception_occurred;
-.type __unknown_exception_occurred, STT_FUNC;
-
-panic_bfin:
-	RTS;

cpu/bf533/cplbmgr.S

@@ -1,601 +0,0 @@
-/*This file is subject to the terms and conditions of the GNU General Public
- * License.
- *
- * Blackfin BF533/2.6 support : LG Soft India
- * Modification: Dec 07 2004
- *	1. Correction in icheck_lock.  Valid lock entries were
- *	   geting victimized, for instruction cplb replacement.
- *	2. Setup loop's are modified as now toolchain support's P Indexed
- *	   addressing
- *	   :LG Soft India
- *
- */
-
-/* Usage: int _cplb_mgr(is_data_miss,int enable_cache)
- * is_data_miss==2 => Mark as Dirty, write to the clean data page
- * is_data_miss==1 => Replace a data CPLB.
- * is_data_miss==0 => Replace an instruction CPLB.
- *
- * Returns:
- * CPLB_RELOADED	=> Successfully updated CPLB table.
- * CPLB_NO_UNLOCKED	=> All CPLBs are locked, so cannot be evicted.This indicates
- *				that the CPLBs in the configuration tablei are badly
- *				configured, as this should never occur.
- * CPLB_NO_ADDR_MATCH	=> The address being accessed, that triggered the exception,
- *				is not covered by any of the CPLBs in the configuration
- *				table. The application isi presumably misbehaving.
- * CPLB_PROT_VIOL	=> The address being accessed, that triggered thei exception,
- *				was not a first-write to a clean Write Back Data page,
- *				and so presumably is a genuine violation of the page's
- *				protection attributes. The application is misbehaving.
- */
-#define ASSEMBLY
-
-#include <asm-blackfin/linkage.h>
-#include <asm-blackfin/blackfin.h>
-#include <asm-blackfin/cplbtab.h>
-#include <asm-blackfin/cplb.h>
-
-.text
-
-.align 2;
-ENTRY(_cplb_mgr)
-
-	[--SP]=( R7:0,P5:0 );
-
-	CC = R0 == 2;
-	IF CC JUMP dcplb_write;
-
-	CC = R0 == 0;
-	IF !CC JUMP dcplb_miss_compare;
-
-	/* ICPLB Miss Exception. We need to choose one of the
-	* currently-installed CPLBs, and replace it with one
-	* from the configuration table.
-	*/
-
-	P4.L = (ICPLB_FAULT_ADDR & 0xFFFF);
-	P4.H = (ICPLB_FAULT_ADDR >> 16);
-
-	P1 = 16;
-	P5.L = page_size_table;
-	P5.H = page_size_table;
-
-	P0.L = (ICPLB_DATA0 & 0xFFFF);
-	P0.H = (ICPLB_DATA0 >> 16);
-	R4 = [P4];		/* Get faulting address*/
-	R6 = 64;		/* Advance past the fault address, which*/
-	R6 = R6 + R4;		/* we'll use if we find a match*/
-	R3 = ((16 << 8) | 2);	/* Extract mask, bits 16 and 17.*/
-
-	R5 = 0;
-isearch:
-
-	R1 = [P0-0x100];	/* Address for this CPLB */
-
-	R0 = [P0++];		/* Info for this CPLB*/
-	CC = BITTST(R0,0);	/* Is the CPLB valid?*/
-	IF !CC JUMP nomatch;	/* Skip it, if not.*/
-	CC = R4 < R1(IU);	/* If fault address less than page start*/
-	IF CC JUMP nomatch;	/* then skip this one.*/
-	R2 = EXTRACT(R0,R3.L) (Z);	/* Get page size*/
-	P1 = R2;
-	P1 = P5 + (P1<<2);	/* index into page-size table*/
-	R2 = [P1];		/* Get the page size*/
-	R1 = R1 + R2;		/* and add to page start, to get page end*/
-	CC = R4 < R1(IU);	/* and see whether fault addr is in page.*/
-	IF !CC R4 = R6;		/* If so, advance the address and finish loop.*/
-	IF !CC JUMP isearch_done;
-nomatch:
-	/* Go around again*/
-	R5 += 1;
-	CC = BITTST(R5, 4);	/* i.e CC = R5 >= 16*/
-	IF !CC JUMP isearch;
-
-isearch_done:
-	I0 = R4;		/* Fault address we'll search for*/
-
-	/* set up pointers */
-	P0.L = (ICPLB_DATA0 & 0xFFFF);
-	P0.H = (ICPLB_DATA0 >> 16);
-
-	/* The replacement procedure for ICPLBs */
-
-	P4.L = (IMEM_CONTROL & 0xFFFF);
-	P4.H = (IMEM_CONTROL >> 16);
-
-	/* disable cplbs */
-	R5 = [P4];		/* Control Register*/
-	BITCLR(R5,ENICPLB_P);
-	CLI R1;
-	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
-	[P4] = R5;
-	SSYNC;
-	STI R1;
-
-	R1 = -1;		/* end point comparison */
-	R3 = 16;		/* counter */
-
-	/* Search through CPLBs for first non-locked entry */
-	/* Overwrite it by moving everyone else up by 1 */
-icheck_lock:
-	R0 = [P0++];
-	R3 = R3 + R1;
-	CC = R3 == R1;
-	IF CC JUMP all_locked;
-	CC = BITTST(R0, 0);		/* an invalid entry is good */
-	IF !CC JUMP ifound_victim;
-	CC = BITTST(R0,1);		/* but a locked entry isn't */
-	IF CC JUMP icheck_lock;
-
-ifound_victim:
-#ifdef CONFIG_CPLB_INFO
-	R7 = [P0 - 0x104];
-	P2.L = ipdt_table;
-	P2.H = ipdt_table;
-	P3.L = ipdt_swapcount_table;
-	P3.H = ipdt_swapcount_table;
-	P3 += -4;
-icount:
-	R2 = [P2];	/* address from config table */
-	P2 += 8;
-	P3 += 8;
-	CC = R2==-1;
-	IF CC JUMP icount_done;
-	CC = R7==R2;
-	IF !CC JUMP icount;
-	R7 = [P3];
-	R7 += 1;
-	[P3] = R7;
-	CSYNC;
-icount_done:
-#endif
-	LC0=R3;
-	LSETUP(is_move,ie_move) LC0;
-is_move:
-	R0 = [P0];
-	[P0 - 4] = R0;
-	R0 = [P0 - 0x100];
-	[P0-0x104] = R0;
-ie_move:P0+=4;
-
-	/* We've made space in the ICPLB table, so that ICPLB15
-	 * is now free to be overwritten. Next, we have to determine
-	 * which CPLB we need to install, from the configuration
-	 * table. This is a matter of getting the start-of-page
-	 * addresses and page-lengths from the config table, and
-	 * determining whether the fault address falls within that
-	 * range.
-	 */
-
-	P2.L = ipdt_table;
-	P2.H = ipdt_table;
-#ifdef	CONFIG_CPLB_INFO
-	P3.L = ipdt_swapcount_table;
-	P3.H = ipdt_swapcount_table;
-	P3 += -8;
-#endif
-	P0.L = page_size_table;
-	P0.H = page_size_table;
-
-	/* Retrieve our fault address (which may have been advanced
-	 * because the faulting instruction crossed a page boundary).
-	 */
-
-	R0 = I0;
-
-	/* An extraction pattern, to get the page-size bits from
-	 * the CPLB data entry. Bits 16-17, so two bits at posn 16.
-	 */
-
-	R1 = ((16<<8)|2);
-inext:	R4 = [P2++];	/* address from config table */
-	R2 = [P2++];	/* data from config table */
-#ifdef	CONFIG_CPLB_INFO
-	P3 += 8;
-#endif
-
-	CC = R4 == -1;	/* End of config table*/
-	IF CC JUMP no_page_in_table;
-
-	/* See if failed address > start address */
-	CC = R4 <= R0(IU);
-	IF !CC JUMP inext;
-
-	/* extract page size (17:16)*/
-	R3 = EXTRACT(R2, R1.L) (Z);
-
-	/* add page size to addr to get range */
-
-	P5 = R3;
-	P5 = P0 + (P5 << 2);	/* scaled, for int access*/
-	R3 = [P5];
-	R3 = R3 + R4;
-
-	/* See if failed address < (start address + page size) */
-	CC = R0 < R3(IU);
-	IF !CC JUMP inext;
-
-	/* We've found a CPLB in the config table that covers
-	 * the faulting address, so install this CPLB into the
-	 * last entry of the table.
-	 */
-
-	P1.L = (ICPLB_DATA15 & 0xFFFF);		/*ICPLB_DATA15*/
-	P1.H = (ICPLB_DATA15 >> 16);
-	[P1] = R2;
-	[P1-0x100] = R4;
-#ifdef	CONFIG_CPLB_INFO
-	R3 = [P3];
-	R3 += 1;
-	[P3] = R3;
-#endif
-
-	/* P4 points to IMEM_CONTROL, and R5 contains its old
-	 * value, after we disabled ICPLBS. Re-enable them.
-	 */
-
-	BITSET(R5,ENICPLB_P);
-	CLI R2;
-	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
-	[P4] = R5;
-	SSYNC;
-	STI R2;
-
-	( R7:0,P5:0 ) = [SP++];
-	R0 = CPLB_RELOADED;
-	RTS;
-
-/* FAILED CASES*/
-no_page_in_table:
-	( R7:0,P5:0 ) = [SP++];
-	R0 = CPLB_NO_ADDR_MATCH;
-	RTS;
-all_locked:
-	( R7:0,P5:0 ) = [SP++];
-	R0 = CPLB_NO_UNLOCKED;
-	RTS;
-prot_violation:
-	( R7:0,P5:0 ) = [SP++];
-	R0 = CPLB_PROT_VIOL;
-	RTS;
-
-dcplb_write:
-
-	/* if a DCPLB is marked as write-back (CPLB_WT==0), and
-	 * it is clean (CPLB_DIRTY==0), then a write to the
-	 * CPLB's page triggers a protection violation. We have to
-	 * mark the CPLB as dirty, to indicate that there are
-	 * pending writes associated with the CPLB.
-	 */
-
-	P4.L = (DCPLB_STATUS & 0xFFFF);
-	P4.H = (DCPLB_STATUS >> 16);
-	P3.L = (DCPLB_DATA0 & 0xFFFF);
-	P3.H = (DCPLB_DATA0 >> 16);
-	R5 = [P4];
-
-	/* A protection violation can be caused by more than just writes
-	 * to a clean WB page, so we have to ensure that:
-	 * - It's a write
-	 * - to a clean WB page
-	 * - and is allowed in the mode the access occurred.
-	 */
-
-	CC = BITTST(R5, 16);	/* ensure it was a write*/
-	IF !CC JUMP prot_violation;
-
-	/* to check the rest, we have to retrieve the DCPLB.*/
-
-	/* The low half of DCPLB_STATUS is a bit mask*/
-
-	R2 = R5.L (Z);	/* indicating which CPLB triggered the event.*/
-	R3 = 30;	/* so we can use this to determine the offset*/
-	R2.L = SIGNBITS R2;
-	R2 = R2.L (Z);	/* into the DCPLB table.*/
-	R3 = R3 - R2;
-	P4 = R3;
-	P3 = P3 + (P4<<2);
-	R3 = [P3];	/* Retrieve the CPLB*/
-
-	/* Now we can check whether it's a clean WB page*/
-
-	CC = BITTST(R3, 14);	/* 0==WB, 1==WT*/
-	IF CC JUMP prot_violation;
-	CC = BITTST(R3, 7);	/* 0 == clean, 1 == dirty*/
-	IF CC JUMP prot_violation;
-
-	/* Check whether the write is allowed in the mode that was active.*/
-
-	R2 = 1<<3;		/* checking write in user mode*/
-	CC = BITTST(R5, 17);	/* 0==was user, 1==was super*/
-	R5 = CC;
-	R2 <<= R5;		/* if was super, check write in super mode*/
-	R2 = R3 & R2;
-	CC = R2 == 0;
-	IF CC JUMP prot_violation;
-
-	/* It's a genuine write-to-clean-page.*/
-
-	BITSET(R3, 7);		/* mark as dirty*/
-	[P3] = R3;		/* and write back.*/
-	CSYNC;
-	( R7:0,P5:0 ) = [SP++];
-	R0 = CPLB_RELOADED;
-	RTS;
-
-dcplb_miss_compare:
-
-	/* Data CPLB Miss event. We need to choose a CPLB to
-	 * evict, and then locate a new CPLB to install from the
-	 * config table, that covers the faulting address.
-	 */
-
-	P1.L = (DCPLB_DATA15 & 0xFFFF);
-	P1.H = (DCPLB_DATA15 >> 16);
-
-	P4.L = (DCPLB_FAULT_ADDR & 0xFFFF);
-	P4.H = (DCPLB_FAULT_ADDR >> 16);
-	R4 = [P4];
-	I0 = R4;
-
-	/* The replacement procedure for DCPLBs*/
-
-	R6 = R1;	/* Save for later*/
-
-	/* Turn off CPLBs while we work.*/
-	P4.L = (DMEM_CONTROL & 0xFFFF);
-	P4.H = (DMEM_CONTROL >> 16);
-	R5 = [P4];
-	BITCLR(R5,ENDCPLB_P);
-	CLI R0;
-	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
-	[P4] = R5;
-	SSYNC;
-	STI R0;
-
-	/* Start looking for a CPLB to evict. Our order of preference
-	 * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs
-	 * are no good.
-	 */
-
-	I1.L = (DCPLB_DATA0 & 0xFFFF);
-	I1.H = (DCPLB_DATA0 >> 16);
-	P1 = 3;
-	P2 = 16;
-	I2.L = dcplb_preference;
-	I2.H = dcplb_preference;
-	LSETUP(sdsearch1, edsearch1) LC0 = P1;
-sdsearch1:
-	R0 = [I2++];		/* Get the bits we're interested in*/
-	P0 = I1;		/* Go back to start of table*/
-	LSETUP (sdsearch2, edsearch2) LC1 = P2;
-sdsearch2:
-	R1 = [P0++];		/* Fetch each installed CPLB in turn*/
-	R2 = R1 & R0;		/* and test for interesting bits.*/
-	CC = R2 == 0;		/* If none are set, it'll do.*/
-	IF !CC JUMP skip_stack_check;
-
-	R2 = [P0 - 0x104];	/* R2 - PageStart */
-	P3.L = page_size_table; /* retrive end address */
-	P3.H = page_size_table; /* retrive end address */
-	R3 = 0x2;		/* 0th - position, 2 bits -length */
-	nop;			/*Anamoly 05000209*/
-	R7 = EXTRACT(R1,R3.l);
-	R7 = R7 << 2;		/* Page size index offset */
-	P5 = R7;
-	P3 = P3 + P5;
-	R7 = [P3];		/* page size in 1K bytes */
-
-	R7 = R7 << 0xA;		/* in bytes * 1024*/
-	R7 = R2 + R7;		/* R7 - PageEnd */
-	R4 = SP;		/* Test SP is in range */
-
-	CC = R7 < R4;		/* if PageEnd < SP */
-	IF CC JUMP dfound_victim;
-	R3 = 0x284;		/* stack length from start of trap till the point */
-				/* 20 stack locations for future modifications */
-	R4 = R4 + R3;
-	CC = R4 < R2;		/* if SP + stacklen < PageStart */
-	IF CC JUMP dfound_victim;
-skip_stack_check:
-
-edsearch2: NOP;
-edsearch1: NOP;
-
-	/* If we got here, we didn't find a DCPLB we considered
-	 * replacable, which means all of them were locked.
-	 */
-
-	JUMP all_locked;
-dfound_victim:
-
-#ifdef CONFIG_CPLB_INFO
-	R1 = [P0 - 0x104];
-	P2.L = dpdt_table;
-	P2.H = dpdt_table;
-	P3.L = dpdt_swapcount_table;
-	P3.H = dpdt_swapcount_table;
-	P3 += -4;
-dicount:
-	R2 = [P2];
-	P2 += 8;
-	P3 += 8;
-	CC = R2==-1;
-	IF CC JUMP dicount_done;
-	CC = R1==R2;
-	IF !CC JUMP dicount;
-	R1 = [P3];
-	R1 += 1;
-	[P3] = R1;
-	CSYNC;
-dicount_done:
-#endif
-
-	/* Clean down the hardware loops*/
-	R2 = 0;
-	LC1 = R2;
-	LC0 = R2;
-
-	/* There's a suitable victim in [P0-4] (because we've
-	 * advanced already). If it's a valid dirty write-back
-	 * CPLB, we need to flush the pending writes first.
-	 */
-
-	CC = BITTST(R1, 0);	/* Is it valid?*/
-	IF !CC JUMP Ddoverwrite;/* nope.*/
-	CC = BITTST(R1, 7);	/* Is it dirty?*/
-	IF !CC JUMP Ddoverwrite (BP);	/* Nope.*/
-	CC = BITTST(R1, 14);	/* Is it Write-Through?*/
-	IF CC JUMP Ddoverwrite; /* Yep*/
-
-	/* This is a dirty page, so we need to flush all writes
-	 * that are pending on the page.
-	 */
-
-	/* Retrieve the page start address*/
-	R0 = [P0 - 0x104];
-	[--sp] = rets;
-	CALL dcplb_flush;	/* R0==CPLB addr, R1==CPLB data*/
-	rets = [sp++];
-Ddoverwrite:
-
-	/* [P0-4] is a suitable victim CPLB, so we want to
-	 * overwrite it by moving all the following CPLBs
-	 * one space closer to the start.
-	 */
-
-	R1.L = ((DCPLB_DATA15+4) & 0xFFFF);		/*DCPLB_DATA15+4*/
-	R1.H = ((DCPLB_DATA15+4) >> 16);
-	R0 = P0;
-
-	/* If the victim happens to be in DCPLB15,
-	 * we don't need to move anything.
-	 */
-
-	CC = R1 == R0;
-	IF CC JUMP de_moved;
-	R1 = R1 - R0;
-	R1 >>= 2;
-	P1 = R1;
-	LSETUP(ds_move, de_move) LC0=P1;
-ds_move:
-	 R0 = [P0++];	/* move data */
-	[P0 - 8] = R0;
-	R0 = [P0-0x104] /* move address */
-de_move: [P0-0x108] = R0;
-
-	/* We've now made space in DCPLB15 for the new CPLB to be
-	 * installed. The next stage is to locate a CPLB in the
-	 * config table that covers the faulting address.
-	 */
-
-de_moved:NOP;
-	R0 = I0;		/* Our faulting address */
-
-	P2.L = dpdt_table;
-	P2.H = dpdt_table;
-#ifdef	CONFIG_CPLB_INFO
-	P3.L = dpdt_swapcount_table;
-	P3.H = dpdt_swapcount_table;
-	P3 += -8;
-#endif
-
-	P1.L = page_size_table;
-	P1.H = page_size_table;
-
-	/* An extraction pattern, to retrieve bits 17:16.*/
-
-	R1 = (16<<8)|2;
-dnext:	R4 = [P2++];	/* address */
-	R2 = [P2++];	/* data */
-#ifdef	CONFIG_CPLB_INFO
-	P3 += 8;
-#endif
-
-	CC = R4 == -1;
-	IF CC JUMP no_page_in_table;
-
-	/* See if failed address > start address */
-	CC = R4 <= R0(IU);
-	IF !CC JUMP dnext;
-
-	/* extract page size (17:16)*/
-	R3 = EXTRACT(R2, R1.L) (Z);
-
-	/* add page size to addr to get range */
-
-	P5 = R3;
-	P5 = P1 + (P5 << 2);
-	R3 = [P5];
-	R3 = R3 + R4;
-
-	/* See if failed address < (start address + page size) */
-	CC = R0 < R3(IU);
-	IF !CC JUMP dnext;
-
-	/* We've found the CPLB that should be installed, so
-	 * write it into CPLB15, masking off any caching bits
-	 * if necessary.
-	 */
-
-	P1.L = (DCPLB_DATA15 & 0xFFFF);
-	P1.H = (DCPLB_DATA15 >> 16);
-
-	/* If the DCPLB has cache bits set, but caching hasn't
-	 * been enabled, then we want to mask off the cache-in-L1
-	 * bit before installing. Moreover, if caching is off, we
-	 * also want to ensure that the DCPLB has WT mode set, rather
-	 * than WB, since WB pages still trigger first-write exceptions
-	 * even when not caching is off, and the page isn't marked as
-	 * cachable. Finally, we could mark the page as clean, not dirty,
-	 * but we choose to leave that decision to the user; if the user
-	 * chooses to have a CPLB pre-defined as dirty, then they always
-	 * pay the cost of flushing during eviction, but don't pay the
-	 * cost of first-write exceptions to mark the page as dirty.
-	 */
-
-#ifdef CONFIG_BLKFIN_WT
-	BITSET(R6, 14);		/* Set WT*/
-#endif
-
-	[P1] = R2;
-	[P1-0x100] = R4;
-#ifdef	CONFIG_CPLB_INFO
-	R3 = [P3];
-	R3 += 1;
-	[P3] = R3;
-#endif
-
-	/* We've installed the CPLB, so re-enable CPLBs. P4
-	 * points to DMEM_CONTROL, and R5 is the value we
-	 * last wrote to it, when we were disabling CPLBs.
-	 */
-
-	BITSET(R5,ENDCPLB_P);
-	CLI R2;
-	.align 8;
-	[P4] = R5;
-	SSYNC;
-	STI R2;
-
-	( R7:0,P5:0 ) = [SP++];
-	R0 = CPLB_RELOADED;
-	RTS;
-
-.data
-.align 4;
-page_size_table:
-.byte4	0x00000400;	/* 1K */
-.byte4	0x00001000;	/* 4K */
-.byte4	0x00100000;	/* 1M */
-.byte4	0x00400000;	/* 4M */
-
-.align 4;
-dcplb_preference:
-.byte4	0x00000001;	/* valid bit */
-.byte4	0x00000082;	/* dirty+lock bits */
-.byte4	0x00000002;	/* lock bit */

cpu/bf533/cpu.c

@@ -29,72 +29,19 @@
 #include <asm/blackfin.h>
 #include <command.h>
 #include <asm/entry.h>
+#include <asm/cplb.h>
+#include <asm/io.h>
 
-#define SSYNC() asm("ssync;")
 #define CACHE_ON 1
 #define CACHE_OFF 0
 
-/* Data Attibutes*/
+extern unsigned int icplb_table[page_descriptor_table_size][2];
+extern unsigned int dcplb_table[page_descriptor_table_size][2];
 
-#define SDRAM_IGENERIC		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID)
+int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-#define SDRAM_IKERNEL		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define L1_IMEMORY            	(PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define SDRAM_INON_CHBL		(PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID)
-
-#define ANOMALY_05000158		0x200
-#define SDRAM_DGENERIC          (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DNON_CHBL         (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_DKERNEL           (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-#define L1_DMEMORY              (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
-#define SDRAM_EBIU              (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
-
-static unsigned int icplb_table[16][2]={
-			{0xFFA00000, L1_IMEMORY},
-			{0x00000000, SDRAM_IKERNEL},	/*SDRAM_Page1*/
-			{0x00400000, SDRAM_IKERNEL},	/*SDRAM_Page1*/
-			{0x07C00000, SDRAM_IKERNEL},    /*SDRAM_Page14*/
-			{0x00800000, SDRAM_IGENERIC},	/*SDRAM_Page2*/
-			{0x00C00000, SDRAM_IGENERIC},	/*SDRAM_Page2*/
-			{0x01000000, SDRAM_IGENERIC},	/*SDRAM_Page4*/
-			{0x01400000, SDRAM_IGENERIC},	/*SDRAM_Page5*/
-			{0x01800000, SDRAM_IGENERIC},	/*SDRAM_Page6*/
-			{0x01C00000, SDRAM_IGENERIC},	/*SDRAM_Page7*/
-			{0x02000000, SDRAM_IGENERIC},	/*SDRAM_Page8*/
-			{0x02400000, SDRAM_IGENERIC},	/*SDRAM_Page9*/
-			{0x02800000, SDRAM_IGENERIC},	/*SDRAM_Page10*/
-			{0x02C00000, SDRAM_IGENERIC},	/*SDRAM_Page11*/
-			{0x03000000, SDRAM_IGENERIC},	/*SDRAM_Page12*/
-			{0x03400000, SDRAM_IGENERIC},	/*SDRAM_Page13*/
-};
-
-static unsigned int dcplb_table[16][2]={
-			{0xFFA00000,L1_DMEMORY},
-			{0x00000000,SDRAM_DKERNEL},	/*SDRAM_Page1*/
-			{0x00400000,SDRAM_DKERNEL},	/*SDRAM_Page1*/
-			{0x07C00000,SDRAM_DKERNEL},	/*SDRAM_Page15*/
-			{0x00800000,SDRAM_DGENERIC},	/*SDRAM_Page2*/
-			{0x00C00000,SDRAM_DGENERIC},	/*SDRAM_Page3*/
-			{0x01000000,SDRAM_DGENERIC},	/*SDRAM_Page4*/
-			{0x01400000,SDRAM_DGENERIC},	/*SDRAM_Page5*/
-			{0x01800000,SDRAM_DGENERIC},	/*SDRAM_Page6*/
-			{0x01C00000,SDRAM_DGENERIC},	/*SDRAM_Page7*/
-			{0x02000000,SDRAM_DGENERIC},	/*SDRAM_Page8*/
-			{0x02400000,SDRAM_DGENERIC},	/*SDRAM_Page9*/
-			{0x02800000,SDRAM_DGENERIC},	/*SDRAM_Page10*/
-			{0x02C00000,SDRAM_DGENERIC},	/*SDRAM_Page11*/
-			{0x03000000,SDRAM_DGENERIC},	/*SDRAM_Page12*/
-			{0x20000000,SDRAM_EBIU},	/*For Network */
-};
-
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	__asm__ __volatile__
+	__asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_ISRAM)
-	("cli r3;"
+	    );
-	"P0 = %0;"
-	"JUMP (P0);"
-	:
-	: "r" (L1_ISRAM)
-	);
 
 	return 0;
 }
@@ -112,29 +59,62 @@ int cleanup_before_linux(void)
 
 void icache_enable(void)
 {
-	unsigned int *I0,*I1;
+	unsigned int *I0, *I1;
-	int i;
+	int i, j = 0;
 
+	/* Before enable icache, disable it first */
+	icache_disable();
 	I0 = (unsigned int *)ICPLB_ADDR0;
 	I1 = (unsigned int *)ICPLB_DATA0;
 
-	for(i=0;i<16;i++){
+	/* make sure the locked ones go in first */
-		*I0++ = icplb_table[i][0];
+	for (i = 0; i < page_descriptor_table_size; i++) {
-		*I1++ = icplb_table[i][1];
+		if (CPLB_LOCK & icplb_table[i][1]) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+				 icplb_table[i][0], icplb_table[i][1]);
+			*I0++ = icplb_table[i][0];
+			*I1++ = icplb_table[i][1];
+			j++;
 		}
+	}
+
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (!(CPLB_LOCK & icplb_table[i][1])) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+				 icplb_table[i][0], icplb_table[i][1]);
+			*I0++ = icplb_table[i][0];
+			*I1++ = icplb_table[i][1];
+			j++;
+			if (j == 16) {
+				break;
+			}
+		}
+	}
+
+	/* Fill the rest with invalid entry */
+	if (j <= 15) {
+		for (; j <= 16; j++) {
+			debug("filling %i with 0", j);
+			*I1++ = 0x0;
+		}
+
+	}
+
 	cli();
-	SSYNC();
+	sync();
+	asm(" .align 8; ");
 	*(unsigned int *)IMEM_CONTROL = IMC | ENICPLB;
-	SSYNC();
+	sync();
 	sti();
 }
 
 void icache_disable(void)
 {
 	cli();
-	SSYNC();
+	sync();
+	asm(" .align 8; ");
 	*(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB);
-	SSYNC();
+	sync();
 	sti();
 }
 
@@ -143,7 +123,7 @@ int icache_status(void)
 	unsigned int value;
 	value = *(unsigned int *)IMEM_CONTROL;
 
-	if( value & (IMC|ENICPLB) )
+	if (value & (IMC | ENICPLB))
 		return CACHE_ON;
 	else
 		return CACHE_OFF;
@@ -151,38 +131,90 @@ int icache_status(void)
 
 void dcache_enable(void)
 {
-	unsigned int *I0,*I1;
+	unsigned int *I0, *I1;
 	unsigned int temp;
-	int i;
+	int i, j = 0;
+
+	/* Before enable dcache, disable it first */
+	dcache_disable();
 	I0 = (unsigned int *)DCPLB_ADDR0;
 	I1 = (unsigned int *)DCPLB_DATA0;
 
-	for(i=0;i<16;i++){
+	/* make sure the locked ones go in first */
-		*I0++ = dcplb_table[i][0];
+	for (i = 0; i < page_descriptor_table_size; i++) {
-		*I1++ = dcplb_table[i][1];
+		if (CPLB_LOCK & dcplb_table[i][1]) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+				 dcplb_table[i][0], dcplb_table[i][1]);
+			*I0++ = dcplb_table[i][0];
+			*I1++ = dcplb_table[i][1];
+			j++;
+		} else {
+			debug("skip   %02i %02i 0x%08x 0x%08x\n", i, j,
+				 dcplb_table[i][0], dcplb_table[i][1]);
 		}
+	}
+
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (!(CPLB_LOCK & dcplb_table[i][1])) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+				 dcplb_table[i][0], dcplb_table[i][1]);
+			*I0++ = dcplb_table[i][0];
+			*I1++ = dcplb_table[i][1];
+			j++;
+			if (j == 16) {
+				break;
+			}
+		}
+	}
+
+	/* Fill the rest with invalid entry */
+	if (j <= 15) {
+		for (; j <= 16; j++) {
+			debug("filling %i with 0", j);
+			*I1++ = 0x0;
+		}
+	}
+
 	cli();
 	temp = *(unsigned int *)DMEM_CONTROL;
-	SSYNC();
+	sync();
-	*(unsigned int *)DMEM_CONTROL = ACACHE_BCACHE |ENDCPLB |PORT_PREF0|temp;
+	asm(" .align 8; ");
-	SSYNC();
+	*(unsigned int *)DMEM_CONTROL =
+	    ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp;
+	sync();
 	sti();
 }
 
 void dcache_disable(void)
 {
+	unsigned int *I0, *I1;
+	int i;
+
 	cli();
-	SSYNC();
+	sync();
-	*(unsigned int *)DMEM_CONTROL &= ~(ACACHE_BCACHE |ENDCPLB |PORT_PREF0);
+	asm(" .align 8; ");
-	SSYNC();
+	*(unsigned int *)DMEM_CONTROL &=
+	    ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+	sync();
 	sti();
+
+	/* after disable dcache,
+	 * clear it so we don't confuse the next application
+	 */
+	I0 = (unsigned int *)DCPLB_ADDR0;
+	I1 = (unsigned int *)DCPLB_DATA0;
+
+	for (i = 0; i < 16; i++) {
+		*I0++ = 0x0;
+		*I1++ = 0x0;
+	}
 }
 
 int dcache_status(void)
 {
 	unsigned int value;
 	value = *(unsigned int *)DMEM_CONTROL;
-	if( value & (ENDCPLB))
+	if (value & (ENDCPLB))
 		return CACHE_ON;
 	else
 		return CACHE_OFF;

cpu/bf533/cpu.h

@@ -32,8 +32,8 @@
 #define DEF_INTERRUPT_FLAGS 1
 #define MAX_TIM_LOAD	0xFFFFFFFF
 
-void blackfin_irq_panic(int reason, struct pt_regs * reg);
+void blackfin_irq_panic(int reason, struct pt_regs *reg);
-extern void dump(struct pt_regs * regs);
+extern void dump(struct pt_regs *regs);
 void display_excp(void);
 asmlinkage void evt_nmi(void);
 asmlinkage void evt_exception(void);
@@ -50,16 +50,17 @@ asmlinkage void evt_evt12(void);
 asmlinkage void evt_evt13(void);
 asmlinkage void evt_soft_int1(void);
 asmlinkage void evt_system_call(void);
-void blackfin_irq_panic(int reason, struct pt_regs * regs);
+void blackfin_irq_panic(int reason, struct pt_regs *regs);
 void blackfin_free_irq(unsigned int irq, void *dev_id);
-void call_isr(int irq, struct pt_regs * fp);
+void call_isr(int irq, struct pt_regs *fp);
 void blackfin_do_irq(int vec, struct pt_regs *fp);
 void blackfin_init_IRQ(void);
 void blackfin_enable_irq(unsigned int irq);
 void blackfin_disable_irq(unsigned int irq);
-extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
 int blackfin_request_irq(unsigned int irq,
-		     void (*handler)(int, void *, struct pt_regs *),
+			 void (*handler) (int, void *, struct pt_regs *),
-		     unsigned long flags,const char *devname,void *dev_id);
+			 unsigned long flags, const char *devname,
+			 void *dev_id);
 void timer_init(void);
 #endif

cpu/bf533/flush.S

@@ -3,13 +3,12 @@
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.
- *
- * Blackfin BF533/2.6 support : LG Soft India
  */
 #define ASSEMBLY
 
 #include <asm/linkage.h>
 #include <asm/cplb.h>
+#include <config.h>
 #include <asm/blackfin.h>
 
 .text
@@ -20,7 +19,7 @@
  * in the instruction cache.
  */
 
-ENTRY(flush_instruction_cache)
+ENTRY(_flush_instruction_cache)
 	[--SP] = ( R7:6, P5:4 );
 	LINK 12;
 	SP += -12;
@@ -33,7 +32,7 @@ ENTRY(flush_instruction_cache)
 inext:	R0 = [P5++];
 	R1 = [P4++];
 	[--SP] =  RETS;
-	CALL icplb_flush;	/* R0 = page, R1 = data*/
+	CALL _icplb_flush;	/* R0 = page, R1 = data*/
 	RETS = [SP++];
 iskip:	R6 += -1;
 	CC = R6;
@@ -52,7 +51,7 @@ iskip:	R6 += -1;
  */
 
 .align 2
-ENTRY(icplb_flush)
+ENTRY(_icplb_flush)
 	[--SP] = ( R7:0, P5:0 );
 	[--SP] = LC0;
 	[--SP] = LT0;
@@ -86,16 +85,17 @@ ENTRY(icplb_flush)
 	 */
 
 	R3 = ((12<<8)|2);		/* Extraction pattern */
-	nop;				/*Anamoly 05000209*/
+	nop;				/* Anamoly 05000209 */
-	R4 = EXTRACT(R0, R3.L) (Z);	/* Extract bits*/
+	R4 = EXTRACT(R0, R3.L) (Z);	/* Extract bits */
-	R3.H = R4.L << 0 ;		/* Save in extraction pattern for later deposit.*/
 
+	/* Save in extraction pattern for later deposit. */
+	R3.H = R4.L << 0;
 
 	/* So:
 	 * R0 = Page start
 	 * R1 = Page length (actually, offset into size/prefix tables)
 	 * R3 = sub-bank deposit values
-  	 *
+	 *
 	 * The cache has 2 Ways, and 64 sets, so we iterate through
 	 * the sets, accessing the tag for each Way, for our Bank and
 	 * sub-bank, looking for dirty, valid tags that match our
@@ -180,8 +180,10 @@ iflush_whole_page:
 	SSYNC;
 	IFLUSH [P0++];		/* because CSYNC can't end loops.*/
 	LSETUP (isall, ieall) LC0 = P1;
-isall:IFLUSH [P0++];
+isall:
-ieall: NOP;
+	IFLUSH [P0++];
+ieall:
+	NOP;
 	SSYNC;
 	JUMP ifinished;
 
@@ -191,7 +193,7 @@ ieall: NOP;
  * in the data cache.
  */
 
-ENTRY(flush_data_cache)
+ENTRY(_flush_data_cache)
 	[--SP] = ( R7:6, P5:4 );
 	LINK 12;
 	SP += -12;
@@ -209,7 +211,7 @@ next:	R0 = [P5++];
 	CC = R2;
 	IF !CC JUMP skip;	/* If not, ignore it.*/
 	[--SP] = RETS;
-	CALL dcplb_flush;	/* R0 = page, R1 = data*/
+	CALL _dcplb_flush;	/* R0 = page, R1 = data*/
 	RETS = [SP++];
 skip:	R6 += -1;
 	CC = R6;
@@ -228,7 +230,7 @@ skip:	R6 += -1;
  */
 
 .align 2
-ENTRY(dcplb_flush)
+ENTRY(_dcplb_flush)
 	[--SP] = ( R7:0, P5:0 );
 	[--SP] = LC0;
 	[--SP] = LT0;
@@ -290,14 +292,15 @@ bank_chosen:
 	R3 = ((12<<8)|2);		/* Extraction pattern */
 	nop;				/*Anamoly 05000209*/
 	R4 = EXTRACT(R0, R3.L) (Z);	/* Extract bits*/
-	R3.H = R4.L << 0 ;		/* Save in extraction pattern for later deposit.*/
+	/* Save in extraction pattern for later deposit.*/
+	R3.H = R4.L << 0;
 
 	/* So:
 	 * R0 = Page start
 	 * R1 = Page length (actually, offset into size/prefix tables)
 	 * R2 = Bank select mask
 	 * R3 = sub-bank deposit values
-  	 *
+	 *
 	 * The cache has 2 Ways, and 64 sets, so we iterate through
 	 * the sets, accessing the tag for each Way, for our Bank and
 	 * sub-bank, looking for dirty, valid tags that match our
@@ -386,7 +389,7 @@ dflush_whole_page:
 	CC = BITTST(R1, 16);	/* Whether 1K or 4K*/
 	IF CC P1 = P2;
 	P1 += -1;		/* Unroll one iteration*/
-    SSYNC;
+	SSYNC;
 	FLUSHINV [P0++];	/* because CSYNC can't end loops.*/
 	LSETUP (eall, eall) LC0 = P1;
 eall:	FLUSHINV [P0++];

cpu/bf533/init_sdram.S

@@ -0,0 +1,179 @@
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/mem_init.h>
+.global init_sdram;
+
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV   CONFIG_CCLK_DIV_not_defined_properly
+#endif
+
+init_sdram:
+	[--SP] = ASTAT;
+	[--SP] = RETS;
+	[--SP] = (R7:0);
+	[--SP] = (P5:0);
+
+#if (BFIN_BOOT_MODE == BF533_SPI_BOOT)
+	p0.h = hi(SPI_BAUD);
+	p0.l = lo(SPI_BAUD);
+	r0.l = CONFIG_SPI_BAUD;
+	w[p0] = r0.l;
+	SSYNC;
+#endif
+
+	/*
+	 * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable
+	 */
+	p0.h = hi(PLL_LOCKCNT);
+	p0.l = lo(PLL_LOCKCNT);
+	r0 = 0x300(Z);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * Put SDRAM in self-refresh, incase anything is running
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITSET (R0, 24);
+	[P2] = R0;
+	SSYNC;
+
+	/*
+	 *  Set PLL_CTL with the value that we calculate in R0
+	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
+	 *   - [7]     = output delay (add 200ps of delay to mem signals)
+	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
+	 *   - [5]     = PDWN      : 1=All Clocks off
+	 *   - [3]     = STOPCK    : 1=Core Clock off
+	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
+	 *   - [0]     = DF        : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+	 *   all other bits set to zero
+	 */
+
+	r0 = CONFIG_VCO_MULT & 63;	/* Load the VCO multiplier         */
+	r0 = r0 << 9;			/* Shift it over,                  */
+	r1 = CONFIG_CLKIN_HALF;		/* Do we need to divide CLKIN by 2?*/
+	r0 = r1 | r0;
+	r1 = CONFIG_PLL_BYPASS;		/* Bypass the PLL?                 */
+	r1 = r1 << 8;			/* Shift it over                   */
+	r0 = r1 | r0;			/* add them all together           */
+
+	p0.h = hi(PLL_CTL);
+	p0.l = lo(PLL_CTL);		/* Load the address                */
+	cli r2;				/* Disable interrupts              */
+	ssync;
+	w[p0] = r0.l;			/* Set the value                   */
+	idle;				/* Wait for the PLL to stablize    */
+	sti r2;				/* Enable interrupts               */
+
+check_again:
+	p0.h = hi(PLL_STAT);
+	p0.l = lo(PLL_STAT);
+	R0 = W[P0](Z);
+	CC = BITTST(R0,5);
+	if ! CC jump check_again;
+
+	/* Configure SCLK & CCLK Dividers */
+	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+	p0.h = hi(PLL_DIV);
+	p0.l = lo(PLL_DIV);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * We now are running at speed, time to set the Async mem bank wait states
+	 * This will speed up execution, since we are normally running from FLASH.
+	 */
+
+	p2.h = (EBIU_AMBCTL1 >> 16);
+	p2.l = (EBIU_AMBCTL1 & 0xFFFF);
+	r0.h = (AMBCTL1VAL >> 16);
+	r0.l = (AMBCTL1VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMBCTL0 >> 16);
+	p2.l = (EBIU_AMBCTL0 & 0xFFFF);
+	r0.h = (AMBCTL0VAL >> 16);
+	r0.l = (AMBCTL0VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMGCTL >> 16);
+	p2.l = (EBIU_AMGCTL & 0xffff);
+	r0 = AMGCTLVAL;
+	w[p2] = r0;
+	ssync;
+
+	/*
+	 * Now, Initialize the SDRAM,
+	 * start with the SDRAM Refresh Rate Control Register
+	 */
+	p0.l = lo(EBIU_SDRRC);
+	p0.h = hi(EBIU_SDRRC);
+	r0 = mem_SDRRC;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Memory Bank Control Register - bank specific parameters
+	 */
+	p0.l = (EBIU_SDBCTL & 0xFFFF);
+	p0.h = (EBIU_SDBCTL >> 16);
+	r0 = mem_SDBCTL;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Global Control Register - global programmable parameters
+	 * Disable self-refresh
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITCLR (R0, 24);
+
+	/*
+	 * Check if SDRAM is already powered up, if it is, enable self-refresh
+	 */
+	p0.h = hi(EBIU_SDSTAT);
+	p0.l = lo(EBIU_SDSTAT);
+	r2.l = w[p0];
+	cc = bittst(r2,3);
+	if !cc jump skip;
+	NOP;
+	BITSET (R0, 23);
+skip:
+	[P2] = R0;
+	SSYNC;
+
+	/* Write in the new value in the register */
+	R0.L = lo(mem_SDGCTL);
+	R0.H = hi(mem_SDGCTL);
+	[P2] = R0;
+	SSYNC;
+	nop;
+
+	(P5:0) = [SP++];
+	(R7:0) = [SP++];
+	RETS   = [SP++];
+	ASTAT  = [SP++];
+	RTS;

cpu/bf533/init_sdram_bootrom_initblock.S

@@ -0,0 +1,179 @@
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/mem_init.h>
+.global init_sdram;
+
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV   CONFIG_CCLK_DIV_not_defined_properly
+#endif
+
+init_sdram:
+	[--SP] = ASTAT;
+	[--SP] = RETS;
+	[--SP] = (R7:0);
+	[--SP] = (P5:0);
+
+#if (BFIN_BOOT_MODE == BF533_SPI_BOOT)
+	p0.h = hi(SPI_BAUD);
+	p0.l = lo(SPI_BAUD);
+	r0.l = CONFIG_SPI_BAUD_INITBLOCK;
+	w[p0] = r0.l;
+	SSYNC;
+#endif
+
+	/*
+	 * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable
+	 */
+	p0.h = hi(PLL_LOCKCNT);
+	p0.l = lo(PLL_LOCKCNT);
+	r0 = 0x300(Z);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * Put SDRAM in self-refresh, incase anything is running
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITSET (R0, 24);
+	[P2] = R0;
+	SSYNC;
+
+	/*
+	 *  Set PLL_CTL with the value that we calculate in R0
+	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
+	 *   - [7]     = output delay (add 200ps of delay to mem signals)
+	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
+	 *   - [5]     = PDWN      : 1=All Clocks off
+	 *   - [3]     = STOPCK    : 1=Core Clock off
+	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
+	 *   - [0]     = DF        : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+	 *   all other bits set to zero
+	 */
+
+	r0 = CONFIG_VCO_MULT & 63;	/* Load the VCO multiplier         */
+	r0 = r0 << 9;			/* Shift it over,                  */
+	r1 = CONFIG_CLKIN_HALF;		/* Do we need to divide CLKIN by 2?*/
+	r0 = r1 | r0;
+	r1 = CONFIG_PLL_BYPASS;		/* Bypass the PLL?                 */
+	r1 = r1 << 8;			/* Shift it over                   */
+	r0 = r1 | r0;			/* add them all together           */
+
+	p0.h = hi(PLL_CTL);
+	p0.l = lo(PLL_CTL);		/* Load the address                */
+	cli r2;				/* Disable interrupts              */
+	ssync;
+	w[p0] = r0.l;			/* Set the value                   */
+	idle;				/* Wait for the PLL to stablize    */
+	sti r2;				/* Enable interrupts               */
+
+check_again:
+	p0.h = hi(PLL_STAT);
+	p0.l = lo(PLL_STAT);
+	R0 = W[P0](Z);
+	CC = BITTST(R0,5);
+	if ! CC jump check_again;
+
+	/* Configure SCLK & CCLK Dividers */
+	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+	p0.h = hi(PLL_DIV);
+	p0.l = lo(PLL_DIV);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * We now are running at speed, time to set the Async mem bank wait states
+	 * This will speed up execution, since we are normally running from FLASH.
+	 */
+
+	p2.h = (EBIU_AMBCTL1 >> 16);
+	p2.l = (EBIU_AMBCTL1 & 0xFFFF);
+	r0.h = (AMBCTL1VAL >> 16);
+	r0.l = (AMBCTL1VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMBCTL0 >> 16);
+	p2.l = (EBIU_AMBCTL0 & 0xFFFF);
+	r0.h = (AMBCTL0VAL >> 16);
+	r0.l = (AMBCTL0VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMGCTL >> 16);
+	p2.l = (EBIU_AMGCTL & 0xffff);
+	r0 = AMGCTLVAL;
+	w[p2] = r0;
+	ssync;
+
+	/*
+	 * Now, Initialize the SDRAM,
+	 * start with the SDRAM Refresh Rate Control Register
+	 */
+	p0.l = lo(EBIU_SDRRC);
+	p0.h = hi(EBIU_SDRRC);
+	r0 = mem_SDRRC;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Memory Bank Control Register - bank specific parameters
+	 */
+	p0.l = (EBIU_SDBCTL & 0xFFFF);
+	p0.h = (EBIU_SDBCTL >> 16);
+	r0 = mem_SDBCTL;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Global Control Register - global programmable parameters
+	 * Disable self-refresh
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITCLR (R0, 24);
+
+	/*
+	 * Check if SDRAM is already powered up, if it is, enable self-refresh
+	 */
+	p0.h = hi(EBIU_SDSTAT);
+	p0.l = lo(EBIU_SDSTAT);
+	r2.l = w[p0];
+	cc = bittst(r2,3);
+	if !cc jump skip;
+	NOP;
+	BITSET (R0, 23);
+skip:
+	[P2] = R0;
+	SSYNC;
+
+	/* Write in the new value in the register */
+	R0.L = lo(mem_SDGCTL);
+	R0.H = hi(mem_SDGCTL);
+	[P2] = R0;
+	SSYNC;
+	nop;
+
+	(P5:0) = [SP++];
+	(R7:0) = [SP++];
+	RETS   = [SP++];
+	ASTAT  = [SP++];
+	RTS;

cpu/bf533/interrupt.S

@@ -40,203 +40,58 @@
  */
 
 #define ASSEMBLY
-
+#include <config.h>
+#include <asm/blackfin.h>
 #include <asm/hw_irq.h>
 #include <asm/entry.h>
 #include <asm/blackfin_defs.h>
-#include <asm/cpu/bf533_irq.h>
 
-.global blackfin_irq_panic;
+.global _blackfin_irq_panic;
 
 .text
 .align 2
 
 #ifndef CONFIG_KGDB
-.global evt_emulation
+.global _evt_emulation
-evt_emulation:
+_evt_emulation:
 	SAVE_CONTEXT
 	r0 = IRQ_EMU;
 	r1 = seqstat;
 	sp += -12;
-	call blackfin_irq_panic;
+	call _blackfin_irq_panic;
 	sp += 12;
 	rte;
 #endif
 
-.global evt_nmi
+.global _evt_nmi
-evt_nmi:
+_evt_nmi:
 	SAVE_CONTEXT
 	r0 = IRQ_NMI;
 	r1 = RETN;
 	sp += -12;
-	call blackfin_irq_panic;
+	call _blackfin_irq_panic;
 	sp += 12;
 
 _evt_nmi_exit:
 	rtn;
 
-.global trap
+.global _trap
-trap:
+_trap:
-	[--sp] = r0;
+	SAVE_ALL_SYS
-	[--sp] = r1;
+	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
-	[--sp] = p0;
+	sp += -12;
-	[--sp] = p1;
+	call _trap_c
-	[--sp] = astat;
+	sp += 12;
-	r0 = seqstat;
+	RESTORE_ALL_SYS
-	R0 <<= 26;
+	rtx;
-	R0 >>= 26;
-	p0 = r0;
-	p1.l = EVTABLE;
-	p1.h = EVTABLE;
-	p0 = p1 + (p0 << 1);
-	r1 = W[p0] (Z);
-	p1 = r1;
-	jump (pc + p1);
 
-.global _EVENT1
+.global _evt_rst
-_EVENT1:
+_evt_rst:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT2
-_EVENT2:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT3
-_EVENT3:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT4
-_EVENT4:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT5
-_EVENT5:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT6
-_EVENT6:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT7
-_EVENT7:
-	RAISE 15;
-	JUMP.S _EXIT;
-
-.global _EVENT8
-_EVENT8:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT9
-_EVENT9:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT10
-_EVENT10:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT11
-_EVENT11:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT12
-_EVENT12:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT13
-_EVENT13:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT14
-_EVENT14:
-/*	RAISE 14;	*/
-	CALL	_cplb_hdr;
-	JUMP.S _EXIT;
-
-.global _EVENT19
-_EVENT19:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT20
-_EVENT20:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EVENT21
-_EVENT21:
-	RAISE 14;
-	JUMP.S _EXIT;
-
-.global _EXIT
-_EXIT:
-	ASTAT = [sp++];
-	p1 = [sp++];
-	p0 = [sp++];
-	r1 = [sp++];
-	r0 = [sp++];
-	RTX;
-
-EVTABLE:
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x0000;
-	.byte2 0x003E;
-	.byte2 0x0042;
-	.byte4 0x0000;
-	.byte4 0x0000;
-	.byte4 0x0000;
-	.byte4 0x0000;
-	.byte4 0x0000;
-	.byte4 0x0000;
-	.byte4 0x0000;
-	.byte2 0x0000;
-	.byte2 0x001E;
-	.byte2 0x0022;
-	.byte2 0x0032;
-	.byte2 0x002e;
-	.byte2 0x0002;
-	.byte2 0x0036;
-	.byte2 0x002A;
-	.byte2 0x001A;
-	.byte2 0x0016;
-	.byte2 0x000A;
-	.byte2 0x000E;
-	.byte2 0x0012;
-	.byte2 0x0006;
-	.byte2 0x0026;
-
-.global evt_rst
-evt_rst:
 	SAVE_CONTEXT
 	r0 = IRQ_RST;
 	r1 = RETN;
 	sp += -12;
-	call do_reset;
+	call _do_reset;
 	sp += 12;
 
 _evt_rst_exit:
@@ -246,19 +101,19 @@ irq_panic:
 	r0 = IRQ_EVX;
 	r1 =  sp;
 	sp += -12;
-	call blackfin_irq_panic;
+	call _blackfin_irq_panic;
 	sp += 12;
 
-.global evt_ivhw
+.global _evt_ivhw
-evt_ivhw:
+_evt_ivhw:
 	SAVE_CONTEXT
 	RAISE 14;
 
 _evt_ivhw_exit:
 	 rti;
 
-.global evt_timer
+.global _evt_timer
-evt_timer:
+_evt_timer:
 	SAVE_CONTEXT
 	r0 = IRQ_CORETMR;
 	sp += -12;
@@ -269,91 +124,91 @@ evt_timer:
 	rti;
 	nop;
 
-.global evt_evt7
+.global _evt_evt7
-evt_evt7:
+_evt_evt7:
 	SAVE_CONTEXT
 	r0 = 7;
 	sp += -12;
-	call process_int;
+	call _process_int;
 	sp += 12;
 
 evt_evt7_exit:
 	RESTORE_CONTEXT
 	rti;
 
-.global evt_evt8
+.global _evt_evt8
-evt_evt8:
+_evt_evt8:
 	SAVE_CONTEXT
 	r0 = 8;
 	sp += -12;
-	call process_int;
+	call _process_int;
 	sp += 12;
 
 evt_evt8_exit:
 	RESTORE_CONTEXT
 	rti;
 
-.global evt_evt9
+.global _evt_evt9
-evt_evt9:
+_evt_evt9:
 	SAVE_CONTEXT
 	r0 = 9;
 	sp += -12;
-	call process_int;
+	call _process_int;
 	sp += 12;
 
 evt_evt9_exit:
 	RESTORE_CONTEXT
 	rti;
 
-.global evt_evt10
+.global _evt_evt10
-evt_evt10:
+_evt_evt10:
 	SAVE_CONTEXT
 	r0 = 10;
 	sp += -12;
-	call process_int;
+	call _process_int;
 	sp += 12;
 
 evt_evt10_exit:
 	RESTORE_CONTEXT
 	rti;
 
-.global evt_evt11
+.global _evt_evt11
-evt_evt11:
+_evt_evt11:
 	SAVE_CONTEXT
 	r0 = 11;
 	sp += -12;
-	call process_int;
+	call _process_int;
 	sp += 12;
 
 evt_evt11_exit:
 	RESTORE_CONTEXT
 	rti;
 
-.global evt_evt12
+.global _evt_evt12
-evt_evt12:
+_evt_evt12:
 	SAVE_CONTEXT
 	r0 = 12;
 	sp += -12;
-	call process_int;
+	call _process_int;
 	sp += 12;
 evt_evt12_exit:
 	 RESTORE_CONTEXT
 	 rti;
 
-.global evt_evt13
+.global _evt_evt13
-evt_evt13:
+_evt_evt13:
 	SAVE_CONTEXT
 	r0 = 13;
 	sp += -12;
-	call process_int;
+	call _process_int;
 	sp += 12;
 
 evt_evt13_exit:
 	 RESTORE_CONTEXT
 	 rti;
 
-.global evt_system_call
+.global _evt_system_call
-evt_system_call:
+_evt_system_call:
 	[--sp] = r0;
 	[--SP] = RETI;
 	r0 = [sp++];
@@ -363,7 +218,7 @@ evt_system_call:
 	r0 = [SP++];
 	SAVE_CONTEXT
 	sp += -12;
-	call display_excp;
+	call _exception_handle;
 	sp += 12;
 	RESTORE_CONTEXT
 	RTI;
@@ -371,8 +226,8 @@ evt_system_call:
 evt_system_call_exit:
 	rti;
 
-.global evt_soft_int1
+.global _evt_soft_int1
-evt_soft_int1:
+_evt_soft_int1:
 	[--sp] = r0;
 	[--SP] = RETI;
 	r0 = [sp++];
@@ -382,7 +237,7 @@ evt_soft_int1:
 	r0 = [SP++];
 	SAVE_CONTEXT
 	sp += -12;
-	call display_excp;
+	call _exception_handle;
 	sp += 12;
 	RESTORE_CONTEXT
 	RTI;

cpu/bf533/interrupts.c

@@ -10,7 +10,7 @@
  * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
  * Copyright 2003 Metrowerks/Motorola
  * Copyright 2003 Bas Vermeulen <bas@buyways.nl>,
- * 			BuyWays B.V. (www.buyways.nl)
+ *			BuyWays B.V. (www.buyways.nl)
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -37,14 +37,15 @@
 #include <common.h>
 #include <asm/machdep.h>
 #include <asm/irq.h>
-#include <asm/cpu/defBF533.h>
+#include <config.h>
+#include <asm/blackfin.h>
 #include "cpu.h"
 
 static ulong timestamp;
 static ulong last_time;
 static int int_flag;
 
-int irq_flags; /* needed by asm-blackfin/system.h */
+int irq_flags;			/* needed by asm-blackfin/system.h */
 
 /* Functions just to satisfy the linker */
 
@@ -61,7 +62,7 @@ unsigned long long get_ticks(void)
  * This function is derived from PowerPC code (timebase clock frequency).
  * On BF533 it returns the number of timer ticks per second.
  */
-ulong get_tbclk (void)
+ulong get_tbclk(void)
 {
 	ulong tbclk;
 
@@ -91,22 +92,22 @@ void udelay(unsigned long usec)
 	unsigned long cclk;
 	cclk = (CONFIG_CCLK_HZ);
 
-	while ( usec > 1 ) {
+	while (usec > 1) {
-	       /*
+		/*
-		* how many clock ticks to delay?
+		 * how many clock ticks to delay?
-		*  - request(in useconds) * clock_ticks(Hz) / useconds/second
+		 *  - request(in useconds) * clock_ticks(Hz) / useconds/second
-		*/
+		 */
 		if (usec < 1000) {
-			delay = (usec * (cclk/244)) >> 12 ;
+			delay = (usec * (cclk / 244)) >> 12;
 			usec = 0;
 		} else {
-			delay = (1000 * (cclk/244)) >> 12 ;
+			delay = (1000 * (cclk / 244)) >> 12;
 			usec -= 1000;
 		}
 
-		asm volatile (" %0 = CYCLES;": "=g"(start));
+		asm volatile (" %0 = CYCLES;":"=r" (start));
 		do {
-			asm volatile (" %0 = CYCLES; ": "=g"(stop));
+			asm volatile (" %0 = CYCLES; ":"=r" (stop));
 		} while (stop - start < delay);
 	}
 
@@ -117,7 +118,7 @@ void timer_init(void)
 {
 	*pTCNTL = 0x1;
 	*pTSCALE = 0x0;
-	*pTCOUNT  = MAX_TIM_LOAD;
+	*pTCOUNT = MAX_TIM_LOAD;
 	*pTPERIOD = MAX_TIM_LOAD;
 	*pTCNTL = 0x7;
 	asm("CSYNC;");
@@ -146,20 +147,23 @@ ulong get_timer(ulong base)
 	/* Number of clocks elapsed */
 	ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT));
 
-	/* Find if the TCOUNT is reset
+	/**
-	timestamp gives the number of times
+	 * Find if the TCOUNT is reset
-	TCOUNT got reset */
+	 * timestamp gives the number of times
-	if(clocks < last_time)
+	 * TCOUNT got reset
+	 */
+	if (clocks < last_time)
 		timestamp++;
 	last_time = clocks;
 
 	/* Get the number of milliseconds */
-	milisec = clocks/(CONFIG_CCLK_HZ / 1000);
+	milisec = clocks / (CONFIG_CCLK_HZ / 1000);
 
-	/* Find the number of millisonds
+	/**
-	that got elapsed before this TCOUNT
+	 * Find the number of millisonds
-	cycle */
+	 * that got elapsed before this TCOUNT cycle
-	milisec += timestamp * (MAX_TIM_LOAD/(CONFIG_CCLK_HZ / 1000));
+	 */
+	milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000));
 
 	return (milisec - base);
 }

cpu/bf533/ints.c

@@ -51,9 +51,9 @@
 void blackfin_irq_panic(int reason, struct pt_regs *regs)
 {
 	printf("\n\nException: IRQ 0x%x entered\n", reason);
-	printf("code=[0x%x], ", (unsigned int) (regs->seqstat & 0x3f));
+	printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f));
-	printf("stack frame=0x%x, ", (unsigned int) regs);
+	printf("stack frame=0x%x, ", (unsigned int)regs);
-	printf("bad PC=0x%04x\n", (unsigned int) regs->pc);
+	printf("bad PC=0x%04x\n", (unsigned int)regs->pc);
 	dump(regs);
 	printf("Unhandled IRQ or exceptions!\n");
 	printf("Please reset the board \n");
@@ -61,46 +61,56 @@ void blackfin_irq_panic(int reason, struct pt_regs *regs)
 
 void blackfin_init_IRQ(void)
 {
-	*(unsigned volatile long *) (SIC_IMASK) = SIC_UNMASK_ALL;
+	*(unsigned volatile long *)(SIC_IMASK) = SIC_UNMASK_ALL;
 	cli();
 #ifndef CONFIG_KGDB
-	*(unsigned volatile long *) (EVT_EMULATION_ADDR) = 0x0;
+	*(unsigned volatile long *)(EVT_EMULATION_ADDR) = 0x0;
 #endif
-	*(unsigned volatile long *) (EVT_NMI_ADDR) =
+	*(unsigned volatile long *)(EVT_NMI_ADDR) =
-		(unsigned volatile long) evt_nmi;
+	    (unsigned volatile long)evt_nmi;
-	*(unsigned volatile long *) (EVT_EXCEPTION_ADDR) =
+	*(unsigned volatile long *)(EVT_EXCEPTION_ADDR) =
-		(unsigned volatile long) trap;
+	    (unsigned volatile long)trap;
-	*(unsigned volatile long *) (EVT_HARDWARE_ERROR_ADDR) =
+	*(unsigned volatile long *)(EVT_HARDWARE_ERROR_ADDR) =
-		(unsigned volatile long) evt_ivhw;
+	    (unsigned volatile long)evt_ivhw;
-	*(unsigned volatile long *) (EVT_RESET_ADDR) =
+	*(unsigned volatile long *)(EVT_RESET_ADDR) =
-		(unsigned volatile long) evt_rst;
+	    (unsigned volatile long)evt_rst;
-	*(unsigned volatile long *) (EVT_TIMER_ADDR) =
+	*(unsigned volatile long *)(EVT_TIMER_ADDR) =
-		(unsigned volatile long) evt_timer;
+	    (unsigned volatile long)evt_timer;
-	*(unsigned volatile long *) (EVT_IVG7_ADDR) =
+	*(unsigned volatile long *)(EVT_IVG7_ADDR) =
-		(unsigned volatile long) evt_evt7;
+	    (unsigned volatile long)evt_evt7;
-	*(unsigned volatile long *) (EVT_IVG8_ADDR) =
+	*(unsigned volatile long *)(EVT_IVG8_ADDR) =
-		(unsigned volatile long) evt_evt8;
+	    (unsigned volatile long)evt_evt8;
-	*(unsigned volatile long *) (EVT_IVG9_ADDR) =
+	*(unsigned volatile long *)(EVT_IVG9_ADDR) =
-		(unsigned volatile long) evt_evt9;
+	    (unsigned volatile long)evt_evt9;
-	*(unsigned volatile long *) (EVT_IVG10_ADDR) =
+	*(unsigned volatile long *)(EVT_IVG10_ADDR) =
-		(unsigned volatile long) evt_evt10;
+	    (unsigned volatile long)evt_evt10;
-	*(unsigned volatile long *) (EVT_IVG11_ADDR) =
+	*(unsigned volatile long *)(EVT_IVG11_ADDR) =
-		(unsigned volatile long) evt_evt11;
+	    (unsigned volatile long)evt_evt11;
-	*(unsigned volatile long *) (EVT_IVG12_ADDR) =
+	*(unsigned volatile long *)(EVT_IVG12_ADDR) =
-		(unsigned volatile long) evt_evt12;
+	    (unsigned volatile long)evt_evt12;
-	*(unsigned volatile long *) (EVT_IVG13_ADDR) =
+	*(unsigned volatile long *)(EVT_IVG13_ADDR) =
-		(unsigned volatile long) evt_evt13;
+	    (unsigned volatile long)evt_evt13;
-	*(unsigned volatile long *) (EVT_IVG14_ADDR) =
+	*(unsigned volatile long *)(EVT_IVG14_ADDR) =
-		(unsigned volatile long) evt_system_call;
+	    (unsigned volatile long)evt_system_call;
-	*(unsigned volatile long *) (EVT_IVG15_ADDR) =
+	*(unsigned volatile long *)(EVT_IVG15_ADDR) =
-		(unsigned volatile long) evt_soft_int1;
+	    (unsigned volatile long)evt_soft_int1;
-	*(volatile unsigned long *) ILAT = 0;
+	*(volatile unsigned long *)ILAT = 0;
 	asm("csync;");
 	sti();
-	*(volatile unsigned long *) IMASK = 0xffbf;
+	*(volatile unsigned long *)IMASK = 0xffbf;
 	asm("csync;");
 }
 
+void exception_handle(void)
+{
+#if defined (CONFIG_PANIC_HANG)
+	display_excp();
+#else
+	udelay(100000);		/* allow messages to go out */
+	do_reset(NULL, 0, 0, NULL);
+#endif
+}
+
 void display_excp(void)
 {
 	printf("Exception!\n");

cpu/bf533/serial.c

@@ -49,6 +49,7 @@
 #include <asm/bitops.h>
 #include <asm/delay.h>
 #include <asm/uaccess.h>
+#include <asm/io.h>
 #include "bf533_serial.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -58,15 +59,16 @@ unsigned long pll_div_fact;
 void calc_baud(void)
 {
 	unsigned char i;
-	int	temp;
+	int temp;
+	u_long sclk = get_sclk();
 
-	for(i = 0; i < sizeof(baud_table)/sizeof(int); i++) {
+	for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) {
-		temp =  CONFIG_SCLK_HZ/(baud_table[i]*8);
+		temp = sclk / (baud_table[i] * 8);
-		if ( temp && 0x1 == 1 ) {
+		if ((temp & 0x1) == 1) {
 			temp++;
 		}
-		temp = temp/2;
+		temp = temp / 2;
-		hw_baud_table[i].dl_high = (temp >> 8)& 0xFF;
+		hw_baud_table[i].dl_high = (temp >> 8) & 0xFF;
 		hw_baud_table[i].dl_low = (temp) & 0xFF;
 	}
 }
@@ -74,6 +76,7 @@ void calc_baud(void)
 void serial_setbrg(void)
 {
 	int i;
+	DECLARE_GLOBAL_DATA_PTR;
 
 	calc_baud();
 
@@ -84,29 +87,29 @@ void serial_setbrg(void)
 
 	/* Enable UART */
 	*pUART_GCTL |= UART_GCTL_UCEN;
-	asm("ssync;");
+	sync();
 
 	/* Set DLAB in LCR to Access DLL and DLH */
 	ACCESS_LATCH;
-	asm("ssync;");
+	sync();
 
 	*pUART_DLL = hw_baud_table[i].dl_low;
-	asm("ssync;");
+	sync();
 	*pUART_DLH = hw_baud_table[i].dl_high;
-	asm("ssync;");
+	sync();
 
 	/* Clear DLAB in LCR to Access THR RBR IER */
 	ACCESS_PORT_IER;
-	asm("ssync;");
+	sync();
 
 	/* Enable  ERBFI and ELSI interrupts
-	* to poll SIC_ISR register*/
+	 * to poll SIC_ISR register*/
 	*pUART_IER = UART_IER_ELSI | UART_IER_ERBFI | UART_IER_ETBEI;
-	asm("ssync;");
+	sync();
 
 	/* Set LCR to Word Lengh 8-bit word select */
 	*pUART_LCR = UART_LCR_WLS8;
-	asm("ssync;");
+	sync();
 
 	return;
 }
@@ -119,8 +122,7 @@ int serial_init(void)
 
 void serial_putc(const char c)
 {
-	if ((*pUART_LSR) & UART_LSR_TEMT)
+	if ((*pUART_LSR) & UART_LSR_TEMT) {
-	{
 		if (c == '\n')
 			serial_putc('\r');
 
@@ -148,17 +150,16 @@ int serial_getc(void)
 	int ret;
 
 	/* Poll for RX Interrupt */
-	while (!((isr_val = *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT));
+	while (!((isr_val =
+		  *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT)) ;
 	asm("csync;");
 
 	uart_lsr_val = *pUART_LSR;	/* Clear status bit */
 	uart_rbr_val = *pUART_RBR;	/* getc() */
 
 	if (isr_val & IRQ_UART_ERROR_BIT) {
-		ret =  -1;
+		ret = -1;
-	}
+	} else {
-	else
-	{
 		ret = uart_rbr_val & 0xff;
 	}
 
@@ -180,10 +181,10 @@ static void local_put_char(char ch)
 	save_and_cli(flags);
 
 	/* Poll for TX Interruput */
-	while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT));
+	while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT)) ;
 	asm("csync;");
 
-	*pUART_THR = ch;			/* putc() */
+	*pUART_THR = ch;	/* putc() */
 
 	if (isr_val & IRQ_UART_ERROR_BIT) {
 		printf("?");
@@ -191,5 +192,5 @@ static void local_put_char(char ch)
 
 	restore_flags(flags);
 
-	return ;
+	return;
 }

cpu/bf533/start.S

@@ -1,5 +1,5 @@
 /*
- * U-boot - start.S Startup file of u-boot for BF533
+ * U-boot - start.S Startup file of u-boot for BF533/BF561
  *
  * Copyright (c) 2005 blackfin.uclinux.org
  *
@@ -38,9 +38,23 @@
 #define ASSEMBLY
 
 #include <linux/config.h>
-#include <asm/blackfin.h>
 #include <config.h>
-#include <asm/mem_init.h>
+#include <asm/blackfin.h>
+
+.global _stext;
+.global __bss_start;
+.global start;
+.global _start;
+.global _rambase;
+.global _ramstart;
+.global _ramend;
+.global _bf533_data_dest;
+.global _bf533_data_size;
+.global edata;
+.global _initialize;
+.global _exit;
+.global flashdataend;
+.global init_sdram;
 
 #if (CONFIG_CCLK_DIV == 1)
 #define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
@@ -58,26 +72,12 @@
 #define CONFIG_CCLK_ACT_DIV   CONFIG_CCLK_DIV_not_defined_properly
 #endif
 
-.global _stext;
-.global __bss_start;
-.global start;
-.global _start;
-.global _rambase;
-.global _ramstart;
-.global _ramend;
-.global _bf533_data_dest;
-.global _bf533_data_size;
-.global edata;
-.global _initialize;
-.global _exit;
-.global flashdataend;
-
 .text
 _start:
 start:
 _stext:
 
-	R0 = 0x30;
+	R0 = 0x32;
 	SYSCFG = R0;
 	SSYNC;
 
@@ -120,8 +120,9 @@ _stext:
 	/* Set loop counters to zero, to make sure that
 	 * hw loops are disabled.
 	 */
-	lc0 = 0;
+	r0  = 0;
-	lc1 = 0;
+	lc0 = r0;
+	lc1 = r0;
 
 	SSYNC;
 
@@ -150,105 +151,40 @@ no_soft_reset:
 	LSETUP(4,4) lc0 = p1;
 	[ p0 ++ ] = r1;
 
-	/*
+	p0.h = hi(SIC_IWR);
-	 *  Set PLL_CTL
+	p0.l = lo(SIC_IWR);
-	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	r0.l = 0x1;
-	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
-	 *   - [7]     = output delay (add 200ps of delay to mem signals)
-	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
-	 *   - [5]     = PDWN      : 1=All Clocks off
-	 *   - [3]     = STOPCK    : 1=Core Clock off
-	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
-	 *   - [0]     = DF        : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
-	 *   all other bits set to zero
-	 */
-
-	r0 = CONFIG_VCO_MULT;	/* Load the VCO multiplier */
-	r0 = r0 << 9;		/* Shift it over */
-	r1 =  CONFIG_CLKIN_HALF;	/* Do we need to divide CLKIN by 2? */
-	r0 = r1 | r0;
-	r1 = CONFIG_PLL_BYPASS;	/* Bypass the PLL?                 */
-	r1 = r1 << 8;	/* Shift it over */
-	r0 = r1 | r0;	/* add them all together */
-
-	p0.h = (PLL_CTL >> 16);
-	p0.l = (PLL_CTL & 0xFFFF);	/* Load the address */
-	cli r2;				/* Disable interrupts */
-	w[p0] = r0;			/* Set the value */
-	idle;				/* Wait for the PLL to stablize */
-	sti r2;				/* Enable interrupts */
-	ssync;
-
-	/*
-	 * Turn on the CYCLES COUNTER
-	 */
-	r2 = SYSCFG;
-	BITSET (r2,1);
-	SYSCFG = r2;
-
-	/* Configure SCLK & CCLK Dividers */
-	r0 = CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV;
-	p0.h = (PLL_DIV >> 16);
-	p0.l = (PLL_DIV & 0xFFFF);
-	w[p0] = r0;
-	ssync;
-
-wait_for_pll_stab:
-	p0.h = (PLL_STAT >> 16);
-	p0.l = (PLL_STAT & 0xFFFF);
-	r0.l = w[p0];
-	cc = bittst(r0,5);
-	if !cc jump wait_for_pll_stab;
-
-	/* Configure SDRAM if SDRAM is already not enabled */
-	p0.l = (EBIU_SDSTAT & 0xFFFF);
-	p0.h = (EBIU_SDSTAT >> 16);
-	r0.l = w[p0];
-	cc = bittst(r0, 3);
-	if !cc jump skip_sdram_enable;
-
-	/* SDRAM initialization */
-	p0.l = (EBIU_SDGCTL & 0xFFFF);
-	p0.h = (EBIU_SDGCTL >> 16);	/* SDRAM Memory Global Control Register */
-	r0.h = (mem_SDGCTL >> 16);
-	r0.l = (mem_SDGCTL & 0xFFFF);
-	[p0] = r0;
-	ssync;
-
-	p0.l = (EBIU_SDBCTL & 0xFFFF);
-	p0.h = (EBIU_SDBCTL >> 16);	/* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
 	w[p0] = r0.l;
-	ssync;
+	SSYNC;
 
-	p0.l = (EBIU_SDRRC & 0xFFFF);
+	sp.l = (0xffb01000 & 0xFFFF);
-	p0.h = (EBIU_SDRRC >> 16);	/* SDRAM Refresh Rate Control Register */
+	sp.h = (0xffb01000 >> 16);
-	r0 = mem_SDRRC;
-	w[p0] = r0.l;
-	ssync;
 
-skip_sdram_enable:
+	call init_sdram;
-	nop;
 
-#ifndef	CFG_NO_FLASH
 	/* relocate into to RAM */
-	p1.l = (CFG_FLASH_BASE & 0xffff);
+	call get_pc;
-	p1.h = (CFG_FLASH_BASE >> 16);
+offset:
+	r2.l = offset;
+	r2.h = offset;
+	r3.l = start;
+	r3.h = start;
+	r1 = r2 - r3;
+
+	r0 = r0 - r1;
+	p1 = r0;
+
 	p2.l = (CFG_MONITOR_BASE & 0xffff);
 	p2.h = (CFG_MONITOR_BASE >> 16);
-	r0.l = (CFG_MONITOR_LEN & 0xffff);
+
-	r0.h = (CFG_MONITOR_LEN >> 16);
+	p3 = 0x04;
+	p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff);
+	p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16);
 loop1:
-	r1 = [p1];
+	r1 = [p1 ++ p3];
-	[p2] = r1;
+	[p2 ++ p3] = r1;
-	p3=0x4;
+	cc=p2==p4;
-	p1=p1+p3;
-	p2=p2+p3;
-	r2=0x4;
-	r0=r0-r2;
-	cc=r0==0x0;
 	if !cc jump loop1;
-#endif
 	/*
 	 * configure STACK
 	 */
@@ -273,7 +209,8 @@ loop1:
 
 	p0.l = (IMASK & 0xFFFF);
 	p0.h = (IMASK >> 16);
-	r0 = IVG15_POS;
+	r0.l = LO(IVG15_POS);
+	r0.h = HI(IVG15_POS);
 	[p0] = r0;
 	raise 15;
 	p0.l = WAIT_HERE;
@@ -288,37 +225,10 @@ WAIT_HERE:
 _real_start:
 	[ -- sp ] = reti;
 
-#ifdef CONFIG_EZKIT533
-	p0.l = (WDOG_CTL & 0xFFFF);
-	p0.h = (WDOG_CTL >> 16);
-	r0 = WATCHDOG_DISABLE(z);
-	w[p0] = r0;
-#endif
-
-	/* Code for initializing Async mem banks */
-	p2.h = (EBIU_AMBCTL1 >> 16);
-	p2.l = (EBIU_AMBCTL1 & 0xFFFF);
-	r0.h = (AMBCTL1VAL >> 16);
-	r0.l = (AMBCTL1VAL & 0xFFFF);
-	[p2] = r0;
-	ssync;
-
-	p2.h = (EBIU_AMBCTL0 >> 16);
-	p2.l = (EBIU_AMBCTL0 & 0xFFFF);
-	r0.h = (AMBCTL0VAL >> 16);
-	r0.l = (AMBCTL0VAL & 0xFFFF);
-	[p2] = r0;
-	ssync;
-
-	p2.h = (EBIU_AMGCTL >> 16);
-	p2.l = (EBIU_AMGCTL & 0xffff);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
 	/* DMA reset code to Hi of L1 SRAM */
 copy:
-	P1.H = hi(SYSMMR_BASE);	/* P1 Points to the beginning of SYSTEM MMR Space */
+	/* P1 Points to the beginning of SYSTEM MMR Space */
+	P1.H = hi(SYSMMR_BASE);
 	P1.L = lo(SYSMMR_BASE);
 
 	R0.H = reset_start;	/* Source Address (high) */
@@ -329,7 +239,8 @@ copy:
 	R1.H = hi(L1_ISRAM);	/* Destination Address (high) */
 	R1.L = lo(L1_ISRAM);	/* Destination Address (low) */
 	R3.L = DMAEN;		/* Source DMAConfig Value (8-bit words) */
-	R4.L = (DI_EN | WNR | DMAEN);	/* Destination DMAConfig Value (8-bit words) */
+	/* Destination DMAConfig Value (8-bit words) */
+	R4.L = (DI_EN | WNR | DMAEN);
 
 DMA:
 	R6 = 0x1 (Z);
@@ -342,57 +253,24 @@ DMA:
 	Memory Read,  8-Bit Transfers, 1-D DMA, Flow - Stop */
 	W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3;
 
-	[P1+OFFSET_(MDMA_D0_START_ADDR)] = R1;	/* Set Destination Base Address */
+	/* Set Destination Base Address */
+	[P1+OFFSET_(MDMA_D0_START_ADDR)] = R1;
 	W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2;	/* Set Destination Count */
 	/* Set Destination DMAConfig = DMA Enable,
 	Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
 	W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4;
 
-	IDLE;	/* Wait for DMA to Complete */
+WAIT_DMA_DONE:
+	p0.h = hi(MDMA_D0_IRQ_STATUS);
+	p0.l = lo(MDMA_D0_IRQ_STATUS);
+	R0 = W[P0](Z);
+	CC = BITTST(R0, 0);
+	if ! CC jump WAIT_DMA_DONE
 
 	R0 = 0x1;
-	W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0;	/* Write 1 to clear DMA interrupt */
 
-	/* DMA reset code to DATA BANK A which uses this port
+	/* Write 1 to clear DMA interrupt */
-	 * to avoid following problem
+	W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0;
-	 * " Data from a Data Cache fill can be corrupoted after or during
-	 *   instruction DMA if certain core stalls exist"
-	 */
-
-copy_as_data:
-	R0.H = reset_start;	/* Source Address (high) */
-	R0.L = reset_start;	/* Source Address (low) */
-	R1.H = reset_end;
-	R1.L = reset_end;
-	R2 = R1 - R0;	/* Count */
-	R1.H = hi(DATA_BANKA_SRAM);	/* Destination Address (high) */
-	R1.L = lo(DATA_BANKA_SRAM);	/* Destination Address (low) */
-	R3.L = DMAEN;	/* Source DMAConfig Value (8-bit words) */
-	R4.L = (DI_EN | WNR | DMAEN);	/* Destination DMAConfig Value (8-bit words) */
-
-DMA_DATA:
-	R6 = 0x1 (Z);
-	W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6;	/* Source Modify = 1 */
-	W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6;	/* Destination Modify = 1 */
-
- 	[P1+OFFSET_(MDMA_S0_START_ADDR)] = R0;	/* Set Source Base Address */
-	W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2;	/* Set Source Count */
-	/* Set Source      DMAConfig = DMA Enable,
-	Memory Read,  8-Bit Transfers, 1-D DMA, Flow - Stop */
-	W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3;
-
-	[P1+OFFSET_(MDMA_D0_START_ADDR)] = R1;	/* Set Destination Base Address */
-	W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2;	/* Set Destination Count */
-	/* Set Destination DMAConfig = DMA Enable,
-	Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
-	W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4;
-
-	IDLE;	/* Wait for DMA to Complete */
-
-	R0 = 0x1;
-	W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0;	/* Write 1 to clear DMA interrupt */
-
-copy_end: nop;
 
 	/* Initialize BSS Section with 0 s */
 	p1.l = __bss_start;
@@ -433,3 +311,6 @@ reset_end: nop;
 
 _exit:
 	jump.s	_exit;
+get_pc:
+	r0 = rets;
+	rts;

cpu/bf533/start1.S

@@ -24,8 +24,8 @@
 
 #define ASSEMBLY
 #include <linux/config.h>
-#include <asm/blackfin.h>
 #include <config.h>
+#include <asm/blackfin.h>
 
 .global	start1;
 .global	_start1;
@@ -34,5 +34,5 @@
 _start1:
 start1:
 	sp += -12;
-	call	board_init_f;
+	call	_board_init_f;
 	sp += 12;

cpu/bf533/traps.c

@@ -42,6 +42,9 @@
 #include <asm/page.h>
 #include <asm/machdep.h>
 #include "cpu.h"
+#include <asm/arch/anomaly.h>
+#include <asm/cplb.h>
+#include <asm/io.h>
 
 void init_IRQ(void)
 {
@@ -51,23 +54,187 @@ void init_IRQ(void)
 
 void process_int(unsigned long vec, struct pt_regs *fp)
 {
+	printf("interrupt\n");
 	return;
 }
 
+extern unsigned int icplb_table[page_descriptor_table_size][2];
+extern unsigned int dcplb_table[page_descriptor_table_size][2];
+
+unsigned long last_cplb_fault_retx;
+
+static unsigned int cplb_sizes[4] =
+    { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 };
+
+void trap_c(struct pt_regs *regs)
+{
+	unsigned int addr;
+	unsigned long trapnr = (regs->seqstat) & SEQSTAT_EXCAUSE;
+	unsigned int i, j, size, *I0, *I1;
+	unsigned short data = 0;
+
+	switch (trapnr) {
+	/* 0x26 - Data CPLB Miss */
+	case VEC_CPLB_M:
+
+#ifdef ANOMALY_05000261
+		/*
+		 * Work around an anomaly: if we see a new DCPLB fault,
+		 * return without doing anything. Then,
+		 * if we get the same fault again, handle it.
+		 */
+		addr = last_cplb_fault_retx;
+		last_cplb_fault_retx = regs->retx;
+		printf("this time, curr = 0x%08x last = 0x%08x\n",
+		       addr, last_cplb_fault_retx);
+		if (addr != last_cplb_fault_retx)
+			goto trap_c_return;
+#endif
+		data = 1;
+
+	case VEC_CPLB_I_M:
+
+		if (data) {
+			addr = *(unsigned int *)pDCPLB_FAULT_ADDR;
+		} else {
+			addr = *(unsigned int *)pICPLB_FAULT_ADDR;
+		}
+		for (i = 0; i < page_descriptor_table_size; i++) {
+			if (data) {
+				size = cplb_sizes[dcplb_table[i][1] >> 16];
+				j = dcplb_table[i][0];
+			} else {
+				size = cplb_sizes[icplb_table[i][1] >> 16];
+				j = icplb_table[i][0];
+			}
+			if ((j <= addr) && ((j + size) > addr)) {
+				debug("found %i 0x%08x\n", i, j);
+				break;
+			}
+		}
+		if (i == page_descriptor_table_size) {
+			printf("something is really wrong\n");
+			do_reset(NULL, 0, 0, NULL);
+		}
+
+		/* Turn the cache off */
+		if (data) {
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)DMEM_CONTROL &=
+			    ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+			sync();
+		} else {
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB);
+			sync();
+		}
+
+		if (data) {
+			I0 = (unsigned int *)DCPLB_ADDR0;
+			I1 = (unsigned int *)DCPLB_DATA0;
+		} else {
+			I0 = (unsigned int *)ICPLB_ADDR0;
+			I1 = (unsigned int *)ICPLB_DATA0;
+		}
+
+		j = 0;
+		while (*I1 & CPLB_LOCK) {
+			debug("skipping %i %08p - %08x\n", j, I1, *I1);
+			*I0++;
+			*I1++;
+			j++;
+		}
+
+		debug("remove %i 0x%08x  0x%08x\n", j, *I0, *I1);
+
+		for (; j < 15; j++) {
+			debug("replace %i 0x%08x  0x%08x\n", j, I0, I0 + 1);
+			*I0++ = *(I0 + 1);
+			*I1++ = *(I1 + 1);
+		}
+
+		if (data) {
+			*I0 = dcplb_table[i][0];
+			*I1 = dcplb_table[i][1];
+			I0 = (unsigned int *)DCPLB_ADDR0;
+			I1 = (unsigned int *)DCPLB_DATA0;
+		} else {
+			*I0 = icplb_table[i][0];
+			*I1 = icplb_table[i][1];
+			I0 = (unsigned int *)ICPLB_ADDR0;
+			I1 = (unsigned int *)ICPLB_DATA0;
+		}
+
+		for (j = 0; j < 16; j++) {
+			debug("%i 0x%08x  0x%08x\n", j, *I0++, *I1++);
+		}
+
+		/* Turn the cache back on */
+		if (data) {
+			j = *(unsigned int *)DMEM_CONTROL;
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)DMEM_CONTROL =
+			    ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j;
+			sync();
+		} else {
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)IMEM_CONTROL = IMC | ENICPLB;
+			sync();
+		}
+
+		break;
+	default:
+		/* All traps come here */
+		printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f));
+		printf("stack frame=0x%x, ", (unsigned int)regs);
+		printf("bad PC=0x%04x\n", (unsigned int)regs->pc);
+		dump(regs);
+		printf("\n\n");
+
+		printf("Unhandled IRQ or exceptions!\n");
+		printf("Please reset the board \n");
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+	return;
+
+}
+
 void dump(struct pt_regs *fp)
 {
-	printf("PC: %08lx\n", fp->pc);
+	debug("RETE:  %08lx  RETN: %08lx  RETX: %08lx  RETS: %08lx\n",
-	printf("SEQSTAT: %08lx    SP: %08lx\n", (long) fp->seqstat,
+		 fp->rete, fp->retn, fp->retx, fp->rets);
-		(long) fp);
+	debug("IPEND: %04lx  SYSCFG: %04lx\n", fp->ipend, fp->syscfg);
-	printf("R0: %08lx    R1: %08lx    R2: %08lx    R3: %08lx\n",
+	debug("SEQSTAT: %08lx    SP: %08lx\n", (long)fp->seqstat, (long)fp);
-		fp->r0, fp->r1, fp->r2, fp->r3);
+	debug("R0: %08lx    R1: %08lx    R2: %08lx    R3: %08lx\n",
-	printf("R4: %08lx    R5: %08lx    R6: %08lx    R7: %08lx\n",
+		 fp->r0, fp->r1, fp->r2, fp->r3);
-		fp->r4, fp->r5, fp->r6, fp->r7);
+	debug("R4: %08lx    R5: %08lx    R6: %08lx    R7: %08lx\n",
-	printf("P0: %08lx    P1: %08lx    P2: %08lx    P3: %08lx\n",
+		 fp->r4, fp->r5, fp->r6, fp->r7);
-		fp->p0, fp->p1, fp->p2, fp->p3);
+	debug("P0: %08lx    P1: %08lx    P2: %08lx    P3: %08lx\n",
-	printf("P4: %08lx    P5: %08lx    FP: %08lx\n", fp->p4, fp->p5,
+		 fp->p0, fp->p1, fp->p2, fp->p3);
-		fp->fp);
+	debug("P4: %08lx    P5: %08lx    FP: %08lx\n",
-	printf("A0.w: %08lx    A0.x: %08lx    A1.w: %08lx    A1.x: %08lx\n",
+		 fp->p4, fp->p5, fp->fp);
-		fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+	debug("A0.w: %08lx    A0.x: %08lx    A1.w: %08lx    A1.x: %08lx\n",
-	printf("\n");
+		 fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+	debug("LB0: %08lx  LT0: %08lx  LC0: %08lx\n",
+		 fp->lb0, fp->lt0, fp->lc0);
+	debug("LB1: %08lx  LT1: %08lx  LC1: %08lx\n",
+		 fp->lb1, fp->lt1, fp->lc1);
+	debug("B0: %08lx  L0: %08lx  M0: %08lx  I0: %08lx\n",
+		 fp->b0, fp->l0, fp->m0, fp->i0);
+	debug("B1: %08lx  L1: %08lx  M1: %08lx  I1: %08lx\n",
+		 fp->b1, fp->l1, fp->m1, fp->i1);
+	debug("B2: %08lx  L2: %08lx  M2: %08lx  I2: %08lx\n",
+		 fp->b2, fp->l2, fp->m2, fp->i2);
+	debug("B3: %08lx  L3: %08lx  M3: %08lx  I3: %08lx\n",
+		 fp->b3, fp->l3, fp->m3, fp->i3);
+
+	debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR);
+	debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR);
+
 }

cpu/bf533/video.c

@@ -0,0 +1,194 @@
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ * (C) Copyright 2002
+ * Wolfgang Denk, wd@denx.de
+ * (C) Copyright 2006
+ * Aubrey Li, aubrey.li@analog.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <stdarg.h>
+#include <common.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <i2c.h>
+#include <linux/types.h>
+#include <devices.h>
+
+#ifdef CONFIG_VIDEO
+#define NTSC_FRAME_ADDR 0x06000000
+#include "video.h"
+
+/* NTSC OUTPUT SIZE  720 * 240 */
+#define VERTICAL	2
+#define HORIZONTAL	4
+
+int is_vblank_line(const int line)
+{
+	/*
+	 *  This array contains a single bit for each line in
+	 *  an NTSC frame.
+	 */
+	if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528))
+		return true;
+
+	return false;
+}
+
+int NTSC_framebuffer_init(char *base_address)
+{
+	const int NTSC_frames = 1;
+	const int NTSC_lines = 525;
+	char *dest = base_address;
+	int frame_num, line_num;
+
+	for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) {
+		for (line_num = 1; line_num <= NTSC_lines; ++line_num) {
+			unsigned int code;
+			int offset = 0;
+			int i;
+
+			if (is_vblank_line(line_num))
+				offset++;
+
+			if (line_num > 266 || line_num < 3)
+				offset += 2;
+
+			/* Output EAV code */
+			code = SystemCodeMap[offset].EAV;
+			write_dest_byte((char)(code >> 24) & 0xff);
+			write_dest_byte((char)(code >> 16) & 0xff);
+			write_dest_byte((char)(code >> 8) & 0xff);
+			write_dest_byte((char)(code) & 0xff);
+
+			/* Output horizontal blanking */
+			for (i = 0; i < 67 * 2; ++i) {
+				write_dest_byte(0x80);
+				write_dest_byte(0x10);
+			}
+
+			/* Output SAV */
+			code = SystemCodeMap[offset].SAV;
+			write_dest_byte((char)(code >> 24) & 0xff);
+			write_dest_byte((char)(code >> 16) & 0xff);
+			write_dest_byte((char)(code >> 8) & 0xff);
+			write_dest_byte((char)(code) & 0xff);
+
+			/* Output empty horizontal data */
+			for (i = 0; i < 360 * 2; ++i) {
+				write_dest_byte(0x80);
+				write_dest_byte(0x10);
+			}
+		}
+	}
+
+	return dest - base_address;
+}
+
+void fill_frame(char *Frame, int Value)
+{
+	int *OddPtr32;
+	int OddLine;
+	int *EvenPtr32;
+	int EvenLine;
+	int i;
+	int *data;
+	int m, n;
+
+	/* fill odd and even frames */
+	for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) {
+		OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276);
+		EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276);
+		for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) {
+			*OddPtr32 = Value;
+			*EvenPtr32 = Value;
+		}
+	}
+
+	for (m = 0; m < VERTICAL; m++) {
+		data = (int *)u_boot_logo.data;
+		for (OddLine = (22 + m), EvenLine = (285 + m);
+		     OddLine < (u_boot_logo.height * VERTICAL) + (22 + m);
+		     OddLine += VERTICAL, EvenLine += VERTICAL) {
+			OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276);
+			EvenPtr32 =
+			    (int *)((Frame + ((EvenLine) * 1716)) + 276);
+			for (i = 0; i < u_boot_logo.width / 2; i++) {
+				/* enlarge one pixel to m x n */
+				for (n = 0; n < HORIZONTAL; n++) {
+					*OddPtr32++ = *data;
+					*EvenPtr32++ = *data;
+				}
+				data++;
+			}
+		}
+	}
+}
+
+void video_putc(const char c)
+{
+}
+
+void video_puts(const char *s)
+{
+}
+
+static int video_init(void)
+{
+	char *NTSCFrame;
+	NTSCFrame = (char *)NTSC_FRAME_ADDR;
+	NTSC_framebuffer_init(NTSCFrame);
+	fill_frame(NTSCFrame, BLUE);
+
+	*pPPI_CONTROL = 0x0082;
+	*pPPI_FRAME = 0x020D;
+
+	*pDMA0_START_ADDR = NTSCFrame;
+	*pDMA0_X_COUNT = 0x035A;
+	*pDMA0_X_MODIFY = 0x0002;
+	*pDMA0_Y_COUNT = 0x020D;
+	*pDMA0_Y_MODIFY = 0x0002;
+	*pDMA0_CONFIG = 0x1015;
+	*pPPI_CONTROL = 0x0083;
+	return 0;
+}
+
+int drv_video_init(void)
+{
+	int error, devices = 1;
+
+	device_t videodev;
+
+	video_init();		/* Video initialization */
+
+	memset(&videodev, 0, sizeof(videodev));
+
+	strcpy(videodev.name, "video");
+	videodev.ext = DEV_EXT_VIDEO;	/* Video extensions */
+	videodev.flags = DEV_FLAGS_OUTPUT;	/* Output only */
+	videodev.putc = video_putc;	/* 'putc' function */
+	videodev.puts = video_puts;	/* 'puts' function */
+
+	error = device_register(&videodev);
+
+	return (error == 0) ? devices : error;
+}
+#endif

cpu/bf533/video.h

@@ -0,0 +1,25 @@
+#include <video_logo.h>
+#define write_dest_byte(val) {*dest++=val;}
+#define BLACK   (0x01800180)	/* black pixel pattern  */
+#define BLUE    (0x296E29F0)	/* blue pixel pattern   */
+#define RED     (0x51F0515A)	/* red pixel pattern    */
+#define MAGENTA (0x6ADE6ACA)	/* magenta pixel pattern */
+#define GREEN   (0x91229136)	/* green pixel pattern  */
+#define CYAN    (0xAA10AAA6)	/* cyan pixel pattern   */
+#define YELLOW  (0xD292D210)	/* yellow pixel pattern */
+#define WHITE   (0xFE80FE80)	/* white pixel pattern  */
+
+#define true 	1
+#define false	0
+
+typedef struct {
+	unsigned int SAV;
+	unsigned int EAV;
+} SystemCodeType;
+
+const SystemCodeType SystemCodeMap[4] = {
+	{0xFF000080, 0xFF00009D},
+	{0xFF0000AB, 0xFF0000B6},
+	{0xFF0000C7, 0xFF0000DA},
+	{0xFF0000EC, 0xFF0000F1}
+};

cpu/bf537/Makefile

@@ -0,0 +1,52 @@
+# U-boot - Makefile
+#
+# Copyright (c) 2005 blackfin.uclinux.org
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(CPU).a
+
+START	= start.o start1.o interrupt.o cache.o flush.o init_sdram.o
+COBJS	= cpu.o traps.o ints.o serial.o interrupts.o video.o i2c.o
+
+EXTRA = init_sdram_bootrom_initblock.o
+
+SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+START	:= $(addprefix $(obj),$(START))
+
+all:	$(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

cpu/bf537/cache.S

@@ -0,0 +1,128 @@
+#define ASSEMBLY
+#include <asm/linkage.h>
+#include <config.h>
+#include <asm/blackfin.h>
+
+.text
+.align 2
+ENTRY(_blackfin_icache_flush_range)
+	R2 = -32;
+	R2 = R0 & R2;
+	P0 = R2;
+	P1 = R1;
+	CSYNC;
+	1:
+	IFLUSH[P0++];
+	CC = P0 < P1(iu);
+	IF CC JUMP 1b(bp);
+	IFLUSH[P0];
+	SSYNC;
+	RTS;
+
+ENTRY(_blackfin_dcache_flush_range)
+	R2 = -32;
+	R2 = R0 & R2;
+	P0 = R2;
+	P1 = R1;
+	CSYNC;
+1:
+	FLUSH[P0++];
+	CC = P0 < P1(iu);
+	IF CC JUMP 1b(bp);
+	FLUSH[P0];
+	SSYNC;
+	RTS;
+
+ENTRY(_icache_invalidate)
+ENTRY(_invalidate_entire_icache)
+	[--SP] = (R7:5);
+
+	P0.L = (IMEM_CONTROL & 0xFFFF);
+	P0.H = (IMEM_CONTROL >> 16);
+	R7 =[P0];
+
+	/*
+	 * Clear the IMC bit , All valid bits in the instruction
+	 * cache are set to the invalid state
+	 */
+	BITCLR(R7, IMC_P);
+	CLI R6;
+	/* SSYNC required before invalidating cache. */
+	SSYNC;
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	/* Configures the instruction cache agian */
+	R6 = (IMC | ENICPLB);
+	R7 = R7 | R6;
+
+	CLI R6;
+	SSYNC;
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	(R7:5) =[SP++];
+	RTS;
+
+/*
+ * Invalidate the Entire Data cache by
+ * clearing DMC[1:0] bits
+ */
+ENTRY(_invalidate_entire_dcache)
+ENTRY(_dcache_invalidate)
+	[--SP] = (R7:6);
+
+	P0.L = (DMEM_CONTROL & 0xFFFF);
+	P0.H = (DMEM_CONTROL >> 16);
+	R7 =[P0];
+
+	/*
+	 * Clear the DMC[1:0] bits, All valid bits in the data
+	 * cache are set to the invalid state
+	 */
+	BITCLR(R7, DMC0_P);
+	BITCLR(R7, DMC1_P);
+	CLI R6;
+	SSYNC;
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+	/* Configures the data cache again */
+
+	R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+	R7 = R7 | R6;
+
+	CLI R6;
+	SSYNC;
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	(R7:6) =[SP++];
+	RTS;
+
+ENTRY(_blackfin_dcache_invalidate_range)
+	R2 = -32;
+	R2 = R0 & R2;
+	P0 = R2;
+	P1 = R1;
+	CSYNC;
+1:
+	FLUSHINV[P0++];
+	CC = P0 < P1(iu);
+	IF CC JUMP 1b(bp);
+
+	/*
+	 * If the data crosses a cache line, then we'll be pointing to
+	 * the last cache line, but won't have flushed/invalidated it yet, so do
+	 * one more.
+	 */
+	FLUSHINV[P0];
+	SSYNC;
+	RTS;

cpu/bf537/config.mk

@@ -1,5 +1,8 @@
+# U-boot - config.mk
 #
-# (C) Copyright 2002-2006
+# Copyright (c) 2005 blackfin.uclinux.org
+#
+# (C) Copyright 2000-2004
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -21,13 +24,4 @@
 # MA 02111-1307 USA
 #
 
-SUBDIRS =
+PLATFORM_RELFLAGS += -mcpu=bf537 -ffixed-P5
-
-LIB	= libcpu.a
-
-AOBJS	= asm.o
-COBJS	= cmp.o cmpi.o two.o twox.o three.o threex.o
-COBJS   += threei.o andi.o srawi.o rlwnm.o rlwinm.o rlwimi.o
-COBJS	+= store.o load.o cr.o b.o multi.o string.o complex.o
-
-include $(TOPDIR)/post/rules.mk

cpu/bf537/cpu.c

@@ -0,0 +1,227 @@
+/*
+ * U-boot - cpu.c CPU specific functions
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/blackfin.h>
+#include <command.h>
+#include <asm/entry.h>
+#include <asm/cplb.h>
+#include <asm/io.h>
+
+#define CACHE_ON 1
+#define CACHE_OFF 0
+
+extern unsigned int icplb_table[page_descriptor_table_size][2];
+extern unsigned int dcplb_table[page_descriptor_table_size][2];
+
+int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	__asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_ISRAM)
+	    );
+
+	return 0;
+}
+
+/* These functions are just used to satisfy the linker */
+int cpu_init(void)
+{
+	return 0;
+}
+
+int cleanup_before_linux(void)
+{
+	return 0;
+}
+
+void icache_enable(void)
+{
+	unsigned int *I0, *I1;
+	int i, j = 0;
+
+	if ((*pCHIPID >> 28) < 2)
+		return;
+
+	/* Before enable icache, disable it first */
+	icache_disable();
+	I0 = (unsigned int *)ICPLB_ADDR0;
+	I1 = (unsigned int *)ICPLB_DATA0;
+
+	/* make sure the locked ones go in first */
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (CPLB_LOCK & icplb_table[i][1]) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+				 icplb_table[i][0], icplb_table[i][1]);
+			*I0++ = icplb_table[i][0];
+			*I1++ = icplb_table[i][1];
+			j++;
+		}
+	}
+
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (!(CPLB_LOCK & icplb_table[i][1])) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+				 icplb_table[i][0], icplb_table[i][1]);
+			*I0++ = icplb_table[i][0];
+			*I1++ = icplb_table[i][1];
+			j++;
+			if (j == 16) {
+				break;
+			}
+		}
+	}
+
+	/* Fill the rest with invalid entry */
+	if (j <= 15) {
+		for (; j < 16; j++) {
+			debug("filling %i with 0", j);
+			*I1++ = 0x0;
+		}
+
+	}
+
+	cli();
+	sync();
+	asm(" .align 8; ");
+	*(unsigned int *)IMEM_CONTROL = IMC | ENICPLB;
+	sync();
+	sti();
+}
+
+void icache_disable(void)
+{
+	if ((*pCHIPID >> 28) < 2)
+		return;
+	cli();
+	sync();
+	asm(" .align 8; ");
+	*(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB);
+	sync();
+	sti();
+}
+
+int icache_status(void)
+{
+	unsigned int value;
+	value = *(unsigned int *)IMEM_CONTROL;
+
+	if (value & (IMC | ENICPLB))
+		return CACHE_ON;
+	else
+		return CACHE_OFF;
+}
+
+void dcache_enable(void)
+{
+	unsigned int *I0, *I1;
+	unsigned int temp;
+	int i, j = 0;
+
+	/* Before enable dcache, disable it first */
+	dcache_disable();
+	I0 = (unsigned int *)DCPLB_ADDR0;
+	I1 = (unsigned int *)DCPLB_DATA0;
+
+	/* make sure the locked ones go in first */
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (CPLB_LOCK & dcplb_table[i][1]) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+				 dcplb_table[i][0], dcplb_table[i][1]);
+			*I0++ = dcplb_table[i][0];
+			*I1++ = dcplb_table[i][1];
+			j++;
+		} else {
+			debug("skip   %02i %02i 0x%08x 0x%08x\n", i, j,
+				 dcplb_table[i][0], dcplb_table[i][1]);
+		}
+	}
+
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (!(CPLB_LOCK & dcplb_table[i][1])) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+				 dcplb_table[i][0], dcplb_table[i][1]);
+			*I0++ = dcplb_table[i][0];
+			*I1++ = dcplb_table[i][1];
+			j++;
+			if (j == 16) {
+				break;
+			}
+		}
+	}
+
+	/* Fill the rest with invalid entry */
+	if (j <= 15) {
+		for (; j < 16; j++) {
+			debug("filling %i with 0", j);
+			*I1++ = 0x0;
+		}
+	}
+
+	cli();
+	temp = *(unsigned int *)DMEM_CONTROL;
+	sync();
+	asm(" .align 8; ");
+	*(unsigned int *)DMEM_CONTROL =
+	    ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp;
+	sync();
+	sti();
+}
+
+void dcache_disable(void)
+{
+	unsigned int *I0, *I1;
+	int i;
+
+	cli();
+	sync();
+	asm(" .align 8; ");
+	*(unsigned int *)DMEM_CONTROL &=
+	    ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+	sync();
+	sti();
+
+	/* after disable dcache,
+	 * clear it so we don't confuse the next application
+	 */
+	I0 = (unsigned int *)DCPLB_ADDR0;
+	I1 = (unsigned int *)DCPLB_DATA0;
+
+	for (i = 0; i < 16; i++) {
+		*I0++ = 0x0;
+		*I1++ = 0x0;
+	}
+}
+
+int dcache_status(void)
+{
+	unsigned int value;
+	value = *(unsigned int *)DMEM_CONTROL;
+
+	if (value & (ENDCPLB))
+		return CACHE_ON;
+	else
+		return CACHE_OFF;
+}

cpu/bf537/cpu.h

@@ -0,0 +1,66 @@
+/*
+ *  U-boot - cpu.h
+ *
+ *  Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CPU_H_
+#define _CPU_H_
+
+#include <command.h>
+
+#define INTERNAL_IRQS (32)
+#define NUM_IRQ_NODES 16
+#define DEF_INTERRUPT_FLAGS 1
+#define MAX_TIM_LOAD	0xFFFFFFFF
+
+void blackfin_irq_panic(int reason, struct pt_regs *reg);
+extern void dump(struct pt_regs *regs);
+void display_excp(void);
+asmlinkage void evt_nmi(void);
+asmlinkage void evt_exception(void);
+asmlinkage void trap(void);
+asmlinkage void evt_ivhw(void);
+asmlinkage void evt_rst(void);
+asmlinkage void evt_timer(void);
+asmlinkage void evt_evt7(void);
+asmlinkage void evt_evt8(void);
+asmlinkage void evt_evt9(void);
+asmlinkage void evt_evt10(void);
+asmlinkage void evt_evt11(void);
+asmlinkage void evt_evt12(void);
+asmlinkage void evt_evt13(void);
+asmlinkage void evt_soft_int1(void);
+asmlinkage void evt_system_call(void);
+void blackfin_irq_panic(int reason, struct pt_regs *regs);
+void blackfin_free_irq(unsigned int irq, void *dev_id);
+void call_isr(int irq, struct pt_regs *fp);
+void blackfin_do_irq(int vec, struct pt_regs *fp);
+void blackfin_init_IRQ(void);
+void blackfin_enable_irq(unsigned int irq);
+void blackfin_disable_irq(unsigned int irq);
+extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
+int blackfin_request_irq(unsigned int irq,
+			 void (*handler) (int, void *, struct pt_regs *),
+			 unsigned long flags, const char *devname,
+			 void *dev_id);
+void timer_init(void);
+#endif

cpu/bf537/flush.S

@@ -0,0 +1,403 @@
+/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
+ * Copyright (C) 2004 LG SOft India. All Rights Reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.
+ */
+#define ASSEMBLY
+
+#include <asm/linkage.h>
+#include <asm/cplb.h>
+#include <config.h>
+#include <asm/blackfin.h>
+
+.text
+
+/* This is an external function being called by the user
+ * application through __flush_cache_all. Currently this function
+ * serves the purpose of flushing all the pending writes in
+ * in the instruction cache.
+ */
+
+ENTRY(_flush_instruction_cache)
+	[--SP] = ( R7:6, P5:4 );
+	LINK 12;
+	SP += -12;
+	P5.H = (ICPLB_ADDR0 >> 16);
+	P5.L = (ICPLB_ADDR0 & 0xFFFF);
+	P4.H = (ICPLB_DATA0 >> 16);
+	P4.L = (ICPLB_DATA0 & 0xFFFF);
+	R7 = CPLB_VALID | CPLB_L1_CHBL;
+	R6 = 16;
+inext:	R0 = [P5++];
+	R1 = [P4++];
+	[--SP] =  RETS;
+	CALL _icplb_flush;	/* R0 = page, R1 = data*/
+	RETS = [SP++];
+iskip:	R6 += -1;
+	CC = R6;
+	IF CC JUMP inext;
+	SSYNC;
+	SP += 12;
+	UNLINK;
+	( R7:6, P5:4 ) = [SP++];
+	RTS;
+
+/* This is an internal function to flush all pending
+ * writes in the cache associated with a particular ICPLB.
+ *
+ * R0 -  page's start address
+ * R1 -  CPLB's data field.
+ */
+
+.align 2
+ENTRY(_icplb_flush)
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] = LC0;
+	[--SP] = LT0;
+	[--SP] = LB0;
+	[--SP] = LC1;
+	[--SP] = LT1;
+	[--SP] = LB1;
+
+	/* If it's a 1K or 4K page, then it's quickest to
+	 * just systematically flush all the addresses in
+	 * the page, regardless of whether they're in the
+	 * cache, or dirty. If it's a 1M or 4M page, there
+	 * are too many addresses, and we have to search the
+	 * cache for lines corresponding to the page.
+	 */
+
+	CC = BITTST(R1, 17);	/* 1MB or 4MB */
+	IF !CC JUMP iflush_whole_page;
+
+	/* We're only interested in the page's size, so extract
+	 * this from the CPLB (bits 17:16), and scale to give an
+	 * offset into the page_size and page_prefix tables.
+	 */
+
+	R1 <<= 14;
+	R1 >>= 30;
+	R1 <<= 2;
+
+	/* We can also determine the sub-bank used, because this is
+	 * taken from bits 13:12 of the address.
+	 */
+
+	R3 = ((12<<8)|2);		/* Extraction pattern */
+	nop;				/* Anamoly 05000209 */
+	R4 = EXTRACT(R0, R3.L) (Z);	/* Extract bits */
+
+	/* Save in extraction pattern for later deposit. */
+	R3.H = R4.L << 0;
+
+	/* So:
+	 * R0 = Page start
+	 * R1 = Page length (actually, offset into size/prefix tables)
+	 * R3 = sub-bank deposit values
+	 *
+	 * The cache has 2 Ways, and 64 sets, so we iterate through
+	 * the sets, accessing the tag for each Way, for our Bank and
+	 * sub-bank, looking for dirty, valid tags that match our
+	 * address prefix.
+	 */
+
+	P5.L = (ITEST_COMMAND & 0xFFFF);
+	P5.H = (ITEST_COMMAND >> 16);
+	P4.L = (ITEST_DATA0 & 0xFFFF);
+	P4.H = (ITEST_DATA0 >> 16);
+
+	P0.L = page_prefix_table;
+	P0.H = page_prefix_table;
+	P1 = R1;
+	R5 = 0;			/* Set counter*/
+	P0 = P1 + P0;
+	R4 = [P0];		/* This is the address prefix*/
+
+	/* We're reading (bit 1==0) the tag (bit 2==0), and we
+	 * don't care about which double-word, since we're only
+	 * fetching tags, so we only have to set Set, Bank,
+	 * Sub-bank and Way.
+	 */
+
+	P2 = 4;
+	LSETUP (ifs1, ife1) LC1 = P2;
+ifs1:	P0 = 32;		/* iterate over all sets*/
+	LSETUP (ifs0, ife0) LC0 = P0;
+ifs0:	R6 = R5 << 5;		/* Combine set*/
+	R6.H = R3.H << 0 ;	/* and sub-bank*/
+	[P5] = R6;		/* Issue Command*/
+	SSYNC;			/* CSYNC will not work here :(*/
+	R7 = [P4];		/* and read Tag.*/
+	CC = BITTST(R7, 0);	/* Check if valid*/
+	IF !CC JUMP ifskip;	/* and skip if not.*/
+
+	/* Compare against the page address. First, plant bits 13:12
+	 * into the tag, since those aren't part of the returned data.
+	 */
+
+	R7 = DEPOSIT(R7, R3);	/* set 13:12*/
+	R1 = R7 & R4;		/* Mask off lower bits*/
+	CC = R1 == R0;		/* Compare against page start.*/
+	IF !CC JUMP ifskip;	/* Skip it if it doesn't match.*/
+
+	/* Tag address matches against page, so this is an entry
+	 * we must flush.
+	 */
+
+	R7 >>= 10;		/* Mask off the non-address bits*/
+	R7 <<= 10;
+	P3 = R7;
+	IFLUSH [P3];		/* And flush the entry*/
+ifskip:
+ife0:	R5 += 1;		/* Advance to next Set*/
+ife1:	NOP;
+
+ifinished:
+	SSYNC;			/* Ensure the data gets out to mem.*/
+
+	/*Finished. Restore context.*/
+	LB1 = [SP++];
+	LT1 = [SP++];
+	LC1 = [SP++];
+	LB0 = [SP++];
+	LT0 = [SP++];
+	LC0 = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
+
+iflush_whole_page:
+	/* It's a 1K or 4K page, so quicker to just flush the
+	 * entire page.
+	 */
+
+	P1 = 32;		/* For 1K pages*/
+	P2 = P1 << 2;		/* For 4K pages*/
+	P0 = R0;		/* Start of page*/
+	CC = BITTST(R1, 16);	/* Whether 1K or 4K*/
+	IF CC P1 = P2;
+	P1 += -1;		/* Unroll one iteration*/
+	SSYNC;
+	IFLUSH [P0++];		/* because CSYNC can't end loops.*/
+	LSETUP (isall, ieall) LC0 = P1;
+isall:IFLUSH [P0++];
+ieall: NOP;
+	SSYNC;
+	JUMP ifinished;
+
+/* This is an external function being called by the user
+ * application through __flush_cache_all. Currently this function
+ * serves the purpose of flushing all the pending writes in
+ * in the data cache.
+ */
+
+ENTRY(_flush_data_cache)
+	[--SP] = ( R7:6, P5:4 );
+	LINK 12;
+	SP += -12;
+	P5.H = (DCPLB_ADDR0 >> 16);
+	P5.L = (DCPLB_ADDR0 & 0xFFFF);
+	P4.H = (DCPLB_DATA0 >> 16);
+	P4.L = (DCPLB_DATA0 & 0xFFFF);
+	R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z);
+	R6 = 16;
+next:	R0 = [P5++];
+	R1 = [P4++];
+	CC = BITTST(R1, 14);	/* Is it write-through?*/
+	IF CC JUMP skip;	/* If so, ignore it.*/
+	R2 = R1 & R7;		/* Is it a dirty, cached page?*/
+	CC = R2;
+	IF !CC JUMP skip;	/* If not, ignore it.*/
+	[--SP] = RETS;
+	CALL _dcplb_flush;	/* R0 = page, R1 = data*/
+	RETS = [SP++];
+skip:	R6 += -1;
+	CC = R6;
+	IF CC JUMP next;
+	SSYNC;
+	SP += 12;
+	UNLINK;
+	( R7:6, P5:4 ) = [SP++];
+	RTS;
+
+/* This is an internal function to flush all pending
+ * writes in the cache associated with a particular DCPLB.
+ *
+ * R0 -  page's start address
+ * R1 -  CPLB's data field.
+ */
+
+.align 2
+ENTRY(_dcplb_flush)
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] = LC0;
+	[--SP] = LT0;
+	[--SP] = LB0;
+	[--SP] = LC1;
+	[--SP] = LT1;
+	[--SP] = LB1;
+
+	/* If it's a 1K or 4K page, then it's quickest to
+	 * just systematically flush all the addresses in
+	 * the page, regardless of whether they're in the
+	 * cache, or dirty. If it's a 1M or 4M page, there
+	 * are too many addresses, and we have to search the
+	 * cache for lines corresponding to the page.
+	 */
+
+	CC = BITTST(R1, 17);	/* 1MB or 4MB */
+	IF !CC JUMP dflush_whole_page;
+
+	/* We're only interested in the page's size, so extract
+	 * this from the CPLB (bits 17:16), and scale to give an
+	 * offset into the page_size and page_prefix tables.
+	 */
+
+	R1 <<= 14;
+	R1 >>= 30;
+	R1 <<= 2;
+
+	/* The page could be mapped into Bank A or Bank B, depending
+	 * on (a) whether both banks are configured as cache, and
+	 * (b) on whether address bit A[x] is set. x is determined
+	 * by DCBS in DMEM_CONTROL
+	 */
+
+	R2 = 0;			/* Default to Bank A (Bank B would be 1)*/
+
+	P0.L = (DMEM_CONTROL & 0xFFFF);
+	P0.H = (DMEM_CONTROL >> 16);
+
+	R3 = [P0];		/* If Bank B is not enabled as cache*/
+	CC = BITTST(R3, 2);	/* then Bank A is our only option.*/
+	IF CC JUMP bank_chosen;
+
+	R4 = 1<<14;		/* If DCBS==0, use A[14].*/
+	R5 = R4 << 7;		/* If DCBS==1, use A[23];*/
+	CC = BITTST(R3, 4);
+	IF CC R4 = R5;		/* R4 now has either bit 14 or bit 23 set.*/
+	R5 = R0 & R4;		/* Use it to test the Page address*/
+	CC = R5;		/* and if that bit is set, we use Bank B,*/
+	R2 = CC;		/* else we use Bank A.*/
+	R2 <<= 23;		/* The Bank selection's at posn 23.*/
+
+bank_chosen:
+
+	/* We can also determine the sub-bank used, because this is
+	 * taken from bits 13:12 of the address.
+	 */
+
+	R3 = ((12<<8)|2);		/* Extraction pattern */
+	nop;				/*Anamoly 05000209*/
+	R4 = EXTRACT(R0, R3.L) (Z);	/* Extract bits*/
+	/* Save in extraction pattern for later deposit.*/
+	R3.H = R4.L << 0;
+
+	/* So:
+	 * R0 = Page start
+	 * R1 = Page length (actually, offset into size/prefix tables)
+	 * R2 = Bank select mask
+	 * R3 = sub-bank deposit values
+	 *
+	 * The cache has 2 Ways, and 64 sets, so we iterate through
+	 * the sets, accessing the tag for each Way, for our Bank and
+	 * sub-bank, looking for dirty, valid tags that match our
+	 * address prefix.
+	 */
+
+	P5.L = (DTEST_COMMAND & 0xFFFF);
+	P5.H = (DTEST_COMMAND >> 16);
+	P4.L = (DTEST_DATA0 & 0xFFFF);
+	P4.H = (DTEST_DATA0 >> 16);
+
+	P0.L = page_prefix_table;
+	P0.H = page_prefix_table;
+	P1 = R1;
+	R5 = 0;			/* Set counter*/
+	P0 = P1 + P0;
+	R4 = [P0];		/* This is the address prefix*/
+
+
+	/* We're reading (bit 1==0) the tag (bit 2==0), and we
+	 * don't care about which double-word, since we're only
+	 * fetching tags, so we only have to set Set, Bank,
+	 * Sub-bank and Way.
+	 */
+
+	P2 = 2;
+	LSETUP (fs1, fe1) LC1 = P2;
+fs1:	P0 = 64;		/* iterate over all sets*/
+	LSETUP (fs0, fe0) LC0 = P0;
+fs0:	R6 = R5 << 5;		/* Combine set*/
+	R6.H = R3.H << 0 ;	/* and sub-bank*/
+	R6 = R6 | R2;		/* and Bank. Leave Way==0 at first.*/
+	BITSET(R6,14);
+	[P5] = R6;		/* Issue Command*/
+	SSYNC;
+	R7 = [P4];		/* and read Tag.*/
+	CC = BITTST(R7, 0);	/* Check if valid*/
+	IF !CC JUMP fskip;	/* and skip if not.*/
+	CC = BITTST(R7, 1);	/* Check if dirty*/
+	IF !CC JUMP fskip;	/* and skip if not.*/
+
+	/* Compare against the page address. First, plant bits 13:12
+	 * into the tag, since those aren't part of the returned data.
+	 */
+
+	R7 = DEPOSIT(R7, R3);	/* set 13:12*/
+	R1 = R7 & R4;		/* Mask off lower bits*/
+	CC = R1 == R0;		/* Compare against page start.*/
+	IF !CC JUMP fskip;	/* Skip it if it doesn't match.*/
+
+	/* Tag address matches against page, so this is an entry
+	 * we must flush.
+	 */
+
+	R7 >>= 10;		/* Mask off the non-address bits*/
+	R7 <<= 10;
+	P3 = R7;
+	SSYNC;
+	FLUSHINV [P3];		/* And flush the entry*/
+fskip:
+fe0:	R5 += 1;		/* Advance to next Set*/
+fe1:	BITSET(R2, 26);		/* Go to next Way.*/
+
+dfinished:
+	SSYNC;			/* Ensure the data gets out to mem.*/
+
+	/*Finished. Restore context.*/
+	LB1 = [SP++];
+	LT1 = [SP++];
+	LC1 = [SP++];
+	LB0 = [SP++];
+	LT0 = [SP++];
+	LC0 = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
+
+dflush_whole_page:
+
+	/* It's a 1K or 4K page, so quicker to just flush the
+	 * entire page.
+	 */
+
+	P1 = 32;		/* For 1K pages*/
+	P2 = P1 << 2;		/* For 4K pages*/
+	P0 = R0;		/* Start of page*/
+	CC = BITTST(R1, 16);	/* Whether 1K or 4K*/
+	IF CC P1 = P2;
+	P1 += -1;		/* Unroll one iteration*/
+	SSYNC;
+	FLUSHINV [P0++];	/* because CSYNC can't end loops.*/
+	LSETUP (eall, eall) LC0 = P1;
+eall:	FLUSHINV [P0++];
+	SSYNC;
+	JUMP dfinished;
+
+.align 4;
+page_prefix_table:
+.byte4 	0xFFFFFC00;	/* 1K */
+.byte4	0xFFFFF000;	/* 4K */
+.byte4	0xFFF00000;	/* 1M */
+.byte4	0xFFC00000;	/* 4M */
+.page_prefix_table.end:

cpu/bf537/i2c.c

@@ -0,0 +1,460 @@
+/****************************************************************
+ * $ID: i2c.c	24 Oct 2006 12:00:00 +0800 $ 			*
+ *								*
+ * Description:							*
+ *								*
+ * Maintainer:  sonicz  <sonic.zhang@analog.com>		*
+ *								*
+ * CopyRight (c)  2006  Analog Device				*
+ * All rights reserved.						*
+ *								*
+ * This file is free software;					*
+ *	you are free to modify and/or redistribute it		*
+ *	under the terms of the GNU General Public Licence (GPL).*
+ *								*
+ ****************************************************************/
+
+#include <common.h>
+
+#ifdef CONFIG_HARD_I2C
+
+#include <asm/blackfin.h>
+#include <i2c.h>
+#include <asm/io.h>
+
+#define bfin_read16(addr) ({ unsigned __v; \
+			__asm__ __volatile__ (\
+			"%0 = w[%1] (z);\n\t"\
+			: "=d"(__v) : "a"(addr)); (unsigned short)__v; })
+
+#define bfin_write16(addr,val) ({\
+			__asm__ __volatile__ (\
+			"w[%0] = %1;\n\t"\
+			: : "a"(addr) , "d"(val) : "memory");})
+
+/* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF) */
+#define bfin_read_TWI_CLKDIV()		bfin_read16(TWI_CLKDIV)
+#define bfin_write_TWI_CLKDIV(val)	bfin_write16(TWI_CLKDIV,val)
+#define bfin_read_TWI_CONTROL()		bfin_read16(TWI_CONTROL)
+#define bfin_write_TWI_CONTROL(val)	bfin_write16(TWI_CONTROL,val)
+#define bfin_read_TWI_SLAVE_CTL()	bfin_read16(TWI_SLAVE_CTL)
+#define bfin_write_TWI_SLAVE_CTL(val)	bfin_write16(TWI_SLAVE_CTL,val)
+#define bfin_read_TWI_SLAVE_STAT()	bfin_read16(TWI_SLAVE_STAT)
+#define bfin_write_TWI_SLAVE_STAT(val)	bfin_write16(TWI_SLAVE_STAT,val)
+#define bfin_read_TWI_SLAVE_ADDR()	bfin_read16(TWI_SLAVE_ADDR)
+#define bfin_write_TWI_SLAVE_ADDR(val)	bfin_write16(TWI_SLAVE_ADDR,val)
+#define bfin_read_TWI_MASTER_CTL()	bfin_read16(TWI_MASTER_CTL)
+#define bfin_write_TWI_MASTER_CTL(val)	bfin_write16(TWI_MASTER_CTL,val)
+#define bfin_read_TWI_MASTER_STAT()	bfin_read16(TWI_MASTER_STAT)
+#define bfin_write_TWI_MASTER_STAT(val)	bfin_write16(TWI_MASTER_STAT,val)
+#define bfin_read_TWI_MASTER_ADDR()	bfin_read16(TWI_MASTER_ADDR)
+#define bfin_write_TWI_MASTER_ADDR(val)	bfin_write16(TWI_MASTER_ADDR,val)
+#define bfin_read_TWI_INT_STAT()	bfin_read16(TWI_INT_STAT)
+#define bfin_write_TWI_INT_STAT(val)	bfin_write16(TWI_INT_STAT,val)
+#define bfin_read_TWI_INT_MASK()	bfin_read16(TWI_INT_MASK)
+#define bfin_write_TWI_INT_MASK(val)	bfin_write16(TWI_INT_MASK,val)
+#define bfin_read_TWI_FIFO_CTL()	bfin_read16(TWI_FIFO_CTL)
+#define bfin_write_TWI_FIFO_CTL(val)	bfin_write16(TWI_FIFO_CTL,val)
+#define bfin_read_TWI_FIFO_STAT()	bfin_read16(TWI_FIFO_STAT)
+#define bfin_write_TWI_FIFO_STAT(val)	bfin_write16(TWI_FIFO_STAT,val)
+#define bfin_read_TWI_XMT_DATA8()	bfin_read16(TWI_XMT_DATA8)
+#define bfin_write_TWI_XMT_DATA8(val)	bfin_write16(TWI_XMT_DATA8,val)
+#define bfin_read_TWI_XMT_DATA16()	bfin_read16(TWI_XMT_DATA16)
+#define bfin_write_TWI_XMT_DATA16(val)	bfin_write16(TWI_XMT_DATA16,val)
+#define bfin_read_TWI_RCV_DATA8()	bfin_read16(TWI_RCV_DATA8)
+#define bfin_write_TWI_RCV_DATA8(val)	bfin_write16(TWI_RCV_DATA8,val)
+#define bfin_read_TWI_RCV_DATA16()	bfin_read16(TWI_RCV_DATA16)
+#define bfin_write_TWI_RCV_DATA16(val)	bfin_write16(TWI_RCV_DATA16,val)
+
+#ifdef DEBUG_I2C
+#define PRINTD(fmt,args...)	do {	\
+	DECLARE_GLOBAL_DATA_PTR;	\
+	if (gd->have_console)		\
+		printf(fmt ,##args);	\
+	} while (0)
+#else
+#define PRINTD(fmt,args...)
+#endif
+
+#ifndef CONFIG_TWICLK_KHZ
+#define CONFIG_TWICLK_KHZ	50
+#endif
+
+/* All transfers are described by this data structure */
+struct i2c_msg {
+	u16 addr;		/* slave address */
+	u16 flags;
+#define I2C_M_STOP		0x2
+#define I2C_M_RD		0x1
+	u16 len;		/* msg length */
+	u8 *buf;		/* pointer to msg data */
+};
+
+/**
+ * i2c_reset: - reset the host controller
+ *
+ */
+
+static void i2c_reset(void)
+{
+	/* Disable TWI */
+	bfin_write_TWI_CONTROL(0);
+	sync();
+
+	/* Set TWI internal clock as 10MHz */
+	bfin_write_TWI_CONTROL(((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F);
+
+	/* Set Twi interface clock as specified */
+	if (CONFIG_TWICLK_KHZ > 400)
+		bfin_write_TWI_CLKDIV(((5 * 1024 / 400) << 8) | ((5 * 1024 /
+						400) & 0xFF));
+	else
+		bfin_write_TWI_CLKDIV(((5 * 1024 /
+					CONFIG_TWICLK_KHZ) << 8) | ((5 * 1024 /
+						CONFIG_TWICLK_KHZ)
+						& 0xFF));
+
+	/* Enable TWI */
+	bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA);
+	sync();
+}
+
+int wait_for_completion(struct i2c_msg *msg, int timeout_count)
+{
+	unsigned short twi_int_stat;
+	unsigned short mast_stat;
+	int i;
+
+	for (i = 0; i < timeout_count; i++) {
+		twi_int_stat = bfin_read_TWI_INT_STAT();
+		mast_stat = bfin_read_TWI_MASTER_STAT();
+
+		if (XMTSERV & twi_int_stat) {
+			/* Transmit next data */
+			if (msg->len > 0) {
+				bfin_write_TWI_XMT_DATA8(*(msg->buf++));
+				msg->len--;
+			} else if (msg->flags & I2C_M_STOP)
+				bfin_write_TWI_MASTER_CTL
+				    (bfin_read_TWI_MASTER_CTL() | STOP);
+			sync();
+			/* Clear status */
+			bfin_write_TWI_INT_STAT(XMTSERV);
+			sync();
+			i = 0;
+		}
+		if (RCVSERV & twi_int_stat) {
+			if (msg->len > 0) {
+				/* Receive next data */
+				*(msg->buf++) = bfin_read_TWI_RCV_DATA8();
+				msg->len--;
+			} else if (msg->flags & I2C_M_STOP) {
+				bfin_write_TWI_MASTER_CTL
+				    (bfin_read_TWI_MASTER_CTL() | STOP);
+				sync();
+			}
+			/* Clear interrupt source */
+			bfin_write_TWI_INT_STAT(RCVSERV);
+			sync();
+			i = 0;
+		}
+		if (MERR & twi_int_stat) {
+			bfin_write_TWI_INT_STAT(MERR);
+			bfin_write_TWI_INT_MASK(0);
+			bfin_write_TWI_MASTER_STAT(0x3e);
+			bfin_write_TWI_MASTER_CTL(0);
+			sync();
+			/*
+			 * if both err and complete int stats are set,
+			 * return proper results.
+			 */
+			if (MCOMP & twi_int_stat) {
+				bfin_write_TWI_INT_STAT(MCOMP);
+				bfin_write_TWI_INT_MASK(0);
+				bfin_write_TWI_MASTER_CTL(0);
+				sync();
+				/*
+				 * If it is a quick transfer,
+				 * only address bug no data, not an err.
+				 */
+				if (msg->len == 0 && mast_stat & BUFRDERR)
+					return 0;
+				/*
+				 * If address not acknowledged return -3,
+				 * else return 0.
+				 */
+				else if (!(mast_stat & ANAK))
+					return 0;
+				else
+					return -3;
+			}
+			return -1;
+		}
+		if (MCOMP & twi_int_stat) {
+			bfin_write_TWI_INT_STAT(MCOMP);
+			sync();
+			bfin_write_TWI_INT_MASK(0);
+			bfin_write_TWI_MASTER_CTL(0);
+			sync();
+			return 0;
+		}
+	}
+	if (msg->flags & I2C_M_RD)
+		return -4;
+	else
+		return -2;
+}
+
+/**
+ * i2c_transfer: - Transfer one byte over the i2c bus
+ *
+ * This function can tranfer a byte over the i2c bus in both directions.
+ * It is used by the public API functions.
+ *
+ * @return:	 0: transfer successful
+ *		-1: transfer fail
+ *		-2: transmit timeout
+ *		-3: ACK missing
+ *		-4: receive timeout
+ *		-5: controller not ready
+ */
+int i2c_transfer(struct i2c_msg *msg)
+{
+	int ret = 0;
+	int timeout_count = 10000;
+	int len = msg->len;
+
+	if (!(bfin_read_TWI_CONTROL() & TWI_ENA)) {
+		ret = -5;
+		goto transfer_error;
+	}
+
+	while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) ;
+
+	/* Set Transmit device address */
+	bfin_write_TWI_MASTER_ADDR(msg->addr);
+
+	/*
+	 * FIFO Initiation.
+	 * Data in FIFO should be discarded before start a new operation.
+	 */
+	bfin_write_TWI_FIFO_CTL(0x3);
+	sync();
+	bfin_write_TWI_FIFO_CTL(0);
+	sync();
+
+	if (!(msg->flags & I2C_M_RD)) {
+		/* Transmit first data */
+		if (msg->len > 0) {
+			PRINTD("1 in i2c_transfer: buf=%d, len=%d\n", *msg->buf,
+			       len);
+			bfin_write_TWI_XMT_DATA8(*(msg->buf++));
+			msg->len--;
+			sync();
+		}
+	}
+
+	/* clear int stat */
+	bfin_write_TWI_INT_STAT(MERR | MCOMP | XMTSERV | RCVSERV);
+
+	/* Interrupt mask . Enable XMT, RCV interrupt */
+	bfin_write_TWI_INT_MASK(MCOMP | MERR |
+			((msg->flags & I2C_M_RD) ? RCVSERV : XMTSERV));
+	sync();
+
+	if (len > 0 && len <= 255)
+		bfin_write_TWI_MASTER_CTL((len << 6));
+	else if (msg->len > 255) {
+		bfin_write_TWI_MASTER_CTL((0xff << 6));
+		msg->flags &= I2C_M_STOP;
+	} else
+		bfin_write_TWI_MASTER_CTL(0);
+
+	/* Master enable */
+	bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
+			((msg->flags & I2C_M_RD)
+			 ? MDIR : 0) | ((CONFIG_TWICLK_KHZ >
+					 100) ? FAST : 0));
+	sync();
+
+	ret = wait_for_completion(msg, timeout_count);
+	PRINTD("3 in i2c_transfer: ret=%d\n", ret);
+
+transfer_error:
+	switch (ret) {
+	case 1:
+		PRINTD(("i2c_transfer: error: transfer fail\n"));
+		break;
+	case 2:
+		PRINTD(("i2c_transfer: error: transmit timeout\n"));
+		break;
+	case 3:
+		PRINTD(("i2c_transfer: error: ACK missing\n"));
+		break;
+	case 4:
+		PRINTD(("i2c_transfer: error: receive timeout\n"));
+		break;
+	case 5:
+		PRINTD(("i2c_transfer: error: controller not ready\n"));
+		i2c_reset();
+		break;
+	default:
+		break;
+	}
+	return ret;
+
+}
+
+/* ---------------------------------------------------------------------*/
+/* API Functions							*/
+/* ---------------------------------------------------------------------*/
+
+void i2c_init(int speed, int slaveaddr)
+{
+	i2c_reset();
+}
+
+/**
+ * i2c_probe: - Test if a chip answers for a given i2c address
+ *
+ * @chip:	address of the chip which is searched for
+ * @return: 	0 if a chip was found, -1 otherwhise
+ */
+
+int i2c_probe(uchar chip)
+{
+	struct i2c_msg msg;
+	u8 probebuf;
+
+	i2c_reset();
+
+	probebuf = 0;
+	msg.addr = chip;
+	msg.flags = 0;
+	msg.len = 1;
+	msg.buf = &probebuf;
+	if (i2c_transfer(&msg))
+		return -1;
+
+	msg.addr = chip;
+	msg.flags = I2C_M_RD;
+	msg.len = 1;
+	msg.buf = &probebuf;
+	if (i2c_transfer(&msg))
+		return -1;
+
+	return 0;
+}
+
+/**
+ *   i2c_read: - Read multiple bytes from an i2c device
+ *
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *		memories, 0 for register type devices with only one
+ *		register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+
+int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+	struct i2c_msg msg;
+	u8 addr_bytes[3];	/* lowest...highest byte of data address */
+
+	PRINTD("i2c_read: chip=0x%x, addr=0x%x, alen=0x%x, len=0x%x\n", chip,
+			addr, alen, len);
+
+	if (alen > 0) {
+		addr_bytes[0] = (u8) ((addr >> 0) & 0x000000FF);
+		addr_bytes[1] = (u8) ((addr >> 8) & 0x000000FF);
+		addr_bytes[2] = (u8) ((addr >> 16) & 0x000000FF);
+		msg.addr = chip;
+		msg.flags = 0;
+		msg.len = alen;
+		msg.buf = addr_bytes;
+		if (i2c_transfer(&msg))
+			return -1;
+	}
+
+	/* start read sequence */
+	PRINTD(("i2c_read: start read sequence\n"));
+	msg.addr = chip;
+	msg.flags = I2C_M_RD;
+	msg.len = len;
+	msg.buf = buffer;
+	if (i2c_transfer(&msg))
+		return -1;
+
+	return 0;
+}
+
+/**
+ *   i2c_write: -  Write multiple bytes to an i2c device
+ *
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *		memories, 0 for register type devices with only one
+ *		register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+
+int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+	struct i2c_msg msg;
+	u8 addr_bytes[3];	/* lowest...highest byte of data address */
+
+	PRINTD
+		("i2c_write: chip=0x%x, addr=0x%x, alen=0x%x, len=0x%x, buf0=0x%x\n",
+		 chip, addr, alen, len, buffer[0]);
+
+	/* chip address write */
+	if (alen > 0) {
+		addr_bytes[0] = (u8) ((addr >> 0) & 0x000000FF);
+		addr_bytes[1] = (u8) ((addr >> 8) & 0x000000FF);
+		addr_bytes[2] = (u8) ((addr >> 16) & 0x000000FF);
+		msg.addr = chip;
+		msg.flags = 0;
+		msg.len = alen;
+		msg.buf = addr_bytes;
+		if (i2c_transfer(&msg))
+			return -1;
+	}
+
+	/* start read sequence */
+	PRINTD(("i2c_write: start write sequence\n"));
+	msg.addr = chip;
+	msg.flags = 0;
+	msg.len = len;
+	msg.buf = buffer;
+	if (i2c_transfer(&msg))
+		return -1;
+
+	return 0;
+
+}
+
+uchar i2c_reg_read(uchar chip, uchar reg)
+{
+	uchar buf;
+
+	PRINTD("i2c_reg_read: chip=0x%02x, reg=0x%02x\n", chip, reg);
+	i2c_read(chip, reg, 0, &buf, 1);
+	return (buf);
+}
+
+void i2c_reg_write(uchar chip, uchar reg, uchar val)
+{
+	PRINTD("i2c_reg_write: chip=0x%02x, reg=0x%02x, val=0x%02x\n", chip,
+			reg, val);
+	i2c_write(chip, reg, 0, &val, 1);
+}
+
+#endif				/* CONFIG_HARD_I2C */

cpu/bf537/init_sdram.S

@@ -0,0 +1,174 @@
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/mem_init.h>
+.global init_sdram;
+
+#if (BFIN_BOOT_MODE != BF537_UART_BOOT)
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV   CONFIG_CCLK_DIV_not_defined_properly
+#endif
+#endif
+
+init_sdram:
+	[--SP] = ASTAT;
+	[--SP] = RETS;
+	[--SP] = (R7:0);
+	[--SP] = (P5:0);
+
+#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+	p0.h = hi(SIC_IWR);
+	p0.l = lo(SIC_IWR);
+	r0.l = 0x1;
+	w[p0] = r0.l;
+	SSYNC;
+
+	p0.h = hi(SPI_BAUD);
+	p0.l = lo(SPI_BAUD);
+	r0.l = CONFIG_SPI_BAUD;
+	w[p0] = r0.l;
+	SSYNC;
+#endif
+
+#if (BFIN_BOOT_MODE != BF537_UART_BOOT)
+
+#ifdef CONFIG_BF537
+	/* Enable PHY CLK buffer output */
+	p0.h = hi(VR_CTL);
+	p0.l = lo(VR_CTL);
+	r0.l = w[p0];
+	bitset(r0, 14);
+	w[p0] = r0.l;
+	ssync;
+#endif
+	/*
+	 * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable
+	 */
+	p0.h = hi(PLL_LOCKCNT);
+	p0.l = lo(PLL_LOCKCNT);
+	r0 = 0x300(Z);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * Put SDRAM in self-refresh, incase anything is running
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITSET (R0, 24);
+	[P2] = R0;
+	SSYNC;
+
+	/*
+	 *  Set PLL_CTL with the value that we calculate in R0
+	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
+	 *   - [7]     = output delay (add 200ps of delay to mem signals)
+	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
+	 *   - [5]     = PDWN      : 1=All Clocks off
+	 *   - [3]     = STOPCK    : 1=Core Clock off
+	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
+	 *   - [0]     = DF	: 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+	 *   all other bits set to zero
+	 */
+
+	r0 = CONFIG_VCO_MULT & 63;	/* Load the VCO multiplier */
+	r0 = r0 << 9;			/* Shift it over */
+	r1 = CONFIG_CLKIN_HALF;		/* Do we need to divide CLKIN by 2?*/
+	r0 = r1 | r0;
+	r1 = CONFIG_PLL_BYPASS;		/* Bypass the PLL? */
+	r1 = r1 << 8;			/* Shift it over */
+	r0 = r1 | r0;			/* add them all together */
+
+	p0.h = hi(PLL_CTL);
+	p0.l = lo(PLL_CTL);		/* Load the address */
+	cli r2;				/* Disable interrupts */
+	ssync;
+	w[p0] = r0.l;			/* Set the value */
+	idle;				/* Wait for the PLL to stablize */
+	sti r2;				/* Enable interrupts */
+
+check_again:
+	p0.h = hi(PLL_STAT);
+	p0.l = lo(PLL_STAT);
+	R0 = W[P0](Z);
+	CC = BITTST(R0,5);
+	if ! CC jump check_again;
+
+	/* Configure SCLK & CCLK Dividers */
+	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+	p0.h = hi(PLL_DIV);
+	p0.l = lo(PLL_DIV);
+	w[p0] = r0.l;
+	ssync;
+#endif
+
+	/*
+	 * Now, Initialize the SDRAM,
+	 * start with the SDRAM Refresh Rate Control Register
+	 */
+	p0.l = lo(EBIU_SDRRC);
+	p0.h = hi(EBIU_SDRRC);
+	r0 = mem_SDRRC;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Memory Bank Control Register - bank specific parameters
+	 */
+	p0.l = (EBIU_SDBCTL & 0xFFFF);
+	p0.h = (EBIU_SDBCTL >> 16);
+	r0 = mem_SDBCTL;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Global Control Register - global programmable parameters
+	 * Disable self-refresh
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITCLR (R0, 24);
+
+	/*
+	 * Check if SDRAM is already powered up, if it is, enable self-refresh
+	 */
+	p0.h = hi(EBIU_SDSTAT);
+	p0.l = lo(EBIU_SDSTAT);
+	r2.l = w[p0];
+	cc = bittst(r2,3);
+	if !cc jump skip;
+	NOP;
+	BITSET (R0, 23);
+skip:
+	[P2] = R0;
+	SSYNC;
+
+	/* Write in the new value in the register */
+	R0.L = lo(mem_SDGCTL);
+	R0.H = hi(mem_SDGCTL);
+	[P2] = R0;
+	SSYNC;
+	nop;
+
+	(P5:0) = [SP++];
+	(R7:0) = [SP++];
+	RETS   = [SP++];
+	ASTAT  = [SP++];
+	RTS;

cpu/bf537/init_sdram_bootrom_initblock.S

@@ -0,0 +1,199 @@
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/mem_init.h>
+.global init_sdram;
+
+#if (BFIN_BOOT_MODE != BF537_UART_BOOT)
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV   CONFIG_CCLK_DIV_not_defined_properly
+#endif
+#endif
+
+init_sdram:
+	[--SP] = ASTAT;
+	[--SP] = RETS;
+	[--SP] = (R7:0);
+	[--SP] = (P5:0);
+
+#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
+	p0.h = hi(SIC_IWR);
+	p0.l = lo(SIC_IWR);
+	r0.l = 0x1;
+	w[p0] = r0.l;
+	SSYNC;
+
+	p0.h = hi(SPI_BAUD);
+	p0.l = lo(SPI_BAUD);
+	r0.l = CONFIG_SPI_BAUD_INITBLOCK;
+	w[p0] = r0.l;
+	SSYNC;
+#endif
+
+#if (BFIN_BOOT_MODE != BF537_UART_BOOT)
+
+#ifdef CONFIG_BF537
+	/* Enable PHY CLK buffer output */
+	p0.h = hi(VR_CTL);
+	p0.l = lo(VR_CTL);
+	r0.l = w[p0];
+	bitset(r0, 14);
+	w[p0] = r0.l;
+	ssync;
+#endif
+	/*
+	 * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable
+	 */
+	p0.h = hi(PLL_LOCKCNT);
+	p0.l = lo(PLL_LOCKCNT);
+	r0 = 0x300(Z);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * Put SDRAM in self-refresh, incase anything is running
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITSET (R0, 24);
+	[P2] = R0;
+	SSYNC;
+
+	/*
+	 *  Set PLL_CTL with the value that we calculate in R0
+	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
+	 *   - [7]     = output delay (add 200ps of delay to mem signals)
+	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
+	 *   - [5]     = PDWN      : 1=All Clocks off
+	 *   - [3]     = STOPCK    : 1=Core Clock off
+	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
+	 *   - [0]     = DF	: 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+	 *   all other bits set to zero
+	 */
+
+	r0 = CONFIG_VCO_MULT & 63;	/* Load the VCO multiplier */
+	r0 = r0 << 9;			/* Shift it over */
+	r1 = CONFIG_CLKIN_HALF;		/* Do we need to divide CLKIN by 2?*/
+	r0 = r1 | r0;
+	r1 = CONFIG_PLL_BYPASS;		/* Bypass the PLL? */
+	r1 = r1 << 8;			/* Shift it over */
+	r0 = r1 | r0;			/* add them all together */
+
+	p0.h = hi(PLL_CTL);
+	p0.l = lo(PLL_CTL);		/* Load the address */
+	cli r2;				/* Disable interrupts */
+	ssync;
+	w[p0] = r0.l;			/* Set the value */
+	idle;				/* Wait for the PLL to stablize */
+	sti r2;				/* Enable interrupts */
+
+check_again:
+	p0.h = hi(PLL_STAT);
+	p0.l = lo(PLL_STAT);
+	R0 = W[P0](Z);
+	CC = BITTST(R0,5);
+	if ! CC jump check_again;
+
+	/* Configure SCLK & CCLK Dividers */
+	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+	p0.h = hi(PLL_DIV);
+	p0.l = lo(PLL_DIV);
+	w[p0] = r0.l;
+	ssync;
+#endif
+
+	/*
+	 * We now are running at speed, time to set the Async mem bank wait states
+	 * This will speed up execution, since we are normally running from FLASH.
+	 */
+
+	p2.h = (EBIU_AMBCTL1 >> 16);
+	p2.l = (EBIU_AMBCTL1 & 0xFFFF);
+	r0.h = (AMBCTL1VAL >> 16);
+	r0.l = (AMBCTL1VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMBCTL0 >> 16);
+	p2.l = (EBIU_AMBCTL0 & 0xFFFF);
+	r0.h = (AMBCTL0VAL >> 16);
+	r0.l = (AMBCTL0VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMGCTL >> 16);
+	p2.l = (EBIU_AMGCTL & 0xffff);
+	r0 = AMGCTLVAL;
+	w[p2] = r0;
+	ssync;
+
+	/*
+	 * Now, Initialize the SDRAM,
+	 * start with the SDRAM Refresh Rate Control Register
+	 */
+	p0.l = lo(EBIU_SDRRC);
+	p0.h = hi(EBIU_SDRRC);
+	r0 = mem_SDRRC;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Memory Bank Control Register - bank specific parameters
+	 */
+	p0.l = (EBIU_SDBCTL & 0xFFFF);
+	p0.h = (EBIU_SDBCTL >> 16);
+	r0 = mem_SDBCTL;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Global Control Register - global programmable parameters
+	 * Disable self-refresh
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITCLR (R0, 24);
+
+	/*
+	 * Check if SDRAM is already powered up, if it is, enable self-refresh
+	 */
+	p0.h = hi(EBIU_SDSTAT);
+	p0.l = lo(EBIU_SDSTAT);
+	r2.l = w[p0];
+	cc = bittst(r2,3);
+	if !cc jump skip;
+	NOP;
+	BITSET (R0, 23);
+skip:
+	[P2] = R0;
+	SSYNC;
+
+	/* Write in the new value in the register */
+	R0.L = lo(mem_SDGCTL);
+	R0.H = hi(mem_SDGCTL);
+	[P2] = R0;
+	SSYNC;
+	nop;
+
+	(P5:0) = [SP++];
+	(R7:0) = [SP++];
+	RETS   = [SP++];
+	ASTAT  = [SP++];
+	RTS;

cpu/bf537/interrupt.S

@@ -0,0 +1,246 @@
+/*
+ * U-boot - interrupt.S Processing of interrupts and exception handling
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on interrupt.S
+ *
+ * Copyright (C) 2003  Metrowerks, Inc. <mwaddel@metrowerks.com>
+ * Copyright (C) 2002  Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca>
+ * Copyright (C) 1998  D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
+ *                     Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ *
+ * (c) 1995, Dionne & Associates
+ * (c) 1995, DKG Display Tech.
+ *
+ * This file is also based on exception.asm
+ * (C) Copyright 2001-2005 - Analog Devices, Inc.  All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define ASSEMBLY
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/hw_irq.h>
+#include <asm/entry.h>
+#include <asm/blackfin_defs.h>
+
+.global _blackfin_irq_panic;
+
+.text
+.align 2
+
+#ifndef CONFIG_KGDB
+.global _evt_emulation
+_evt_emulation:
+	SAVE_CONTEXT
+	r0 = IRQ_EMU;
+	r1 = seqstat;
+	sp += -12;
+	call _blackfin_irq_panic;
+	sp += 12;
+	rte;
+#endif
+
+.global _evt_nmi
+_evt_nmi:
+	SAVE_CONTEXT
+	r0 = IRQ_NMI;
+	r1 = RETN;
+	sp += -12;
+	call _blackfin_irq_panic;
+	sp += 12;
+
+_evt_nmi_exit:
+	rtn;
+
+.global _trap
+_trap:
+	SAVE_ALL_SYS
+	r0 = sp;	/* stack frame pt_regs pointer argument ==> r0 */
+	sp += -12;
+	call _trap_c
+	sp += 12;
+	RESTORE_ALL_SYS
+	rtx;
+
+.global _evt_rst
+_evt_rst:
+	SAVE_CONTEXT
+	r0 = IRQ_RST;
+	r1 = RETN;
+	sp += -12;
+	call _do_reset;
+	sp += 12;
+
+_evt_rst_exit:
+	rtn;
+
+irq_panic:
+	r0 = IRQ_EVX;
+	r1 =  sp;
+	sp += -12;
+	call _blackfin_irq_panic;
+	sp += 12;
+
+.global _evt_ivhw
+_evt_ivhw:
+	SAVE_CONTEXT
+	RAISE 14;
+
+_evt_ivhw_exit:
+	 rti;
+
+.global _evt_timer
+_evt_timer:
+	SAVE_CONTEXT
+	r0 = IRQ_CORETMR;
+	sp += -12;
+	/* Polling method used now. */
+	/* call timer_int; */
+	sp += 12;
+	RESTORE_CONTEXT
+	rti;
+	nop;
+
+.global _evt_evt7
+_evt_evt7:
+	SAVE_CONTEXT
+	r0 = 7;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt7_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt8
+_evt_evt8:
+	SAVE_CONTEXT
+	r0 = 8;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt8_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt9
+_evt_evt9:
+	SAVE_CONTEXT
+	r0 = 9;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt9_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt10
+_evt_evt10:
+	SAVE_CONTEXT
+	r0 = 10;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt10_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt11
+_evt_evt11:
+	SAVE_CONTEXT
+	r0 = 11;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt11_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt12
+_evt_evt12:
+	SAVE_CONTEXT
+	r0 = 12;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+evt_evt12_exit:
+	 RESTORE_CONTEXT
+	 rti;
+
+.global _evt_evt13
+_evt_evt13:
+	SAVE_CONTEXT
+	r0 = 13;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt13_exit:
+	 RESTORE_CONTEXT
+	 rti;
+
+.global _evt_system_call
+_evt_system_call:
+	[--sp] = r0;
+	[--SP] = RETI;
+	r0 = [sp++];
+	r0 += 2;
+	[--sp] = r0;
+	RETI = [SP++];
+	r0 = [SP++];
+	SAVE_CONTEXT
+	sp += -12;
+	call _exception_handle;
+	sp += 12;
+	RESTORE_CONTEXT
+	RTI;
+
+evt_system_call_exit:
+	rti;
+
+.global _evt_soft_int1
+_evt_soft_int1:
+	[--sp] = r0;
+	[--SP] = RETI;
+	r0 = [sp++];
+	r0 += 2;
+	[--sp] = r0;
+	RETI = [SP++];
+	r0 = [SP++];
+	SAVE_CONTEXT
+	sp += -12;
+	call _exception_handle;
+	sp += 12;
+	RESTORE_CONTEXT
+	RTI;
+
+evt_soft_int1_exit:
+	rti;

cpu/bf537/interrupts.c

@@ -0,0 +1,174 @@
+/*
+ * U-boot - interrupts.c Interrupt related routines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on interrupts.c
+ * Copyright 1996 Roman Zippel
+ * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * Copyright 2003 Metrowerks/Motorola
+ * Copyright 2003 Bas Vermeulen <bas@buyways.nl>,
+ *			BuyWays B.V. (www.buyways.nl)
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include "cpu.h"
+
+static ulong timestamp;
+static ulong last_time;
+static int int_flag;
+
+int irq_flags;			/* needed by asm-blackfin/system.h */
+
+/* Functions just to satisfy the linker */
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On BF533 it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On BF533 it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+	ulong tbclk;
+
+	tbclk = CFG_HZ;
+	return tbclk;
+}
+
+void enable_interrupts(void)
+{
+	restore_flags(int_flag);
+}
+
+int disable_interrupts(void)
+{
+	save_and_cli(int_flag);
+	return 1;
+}
+
+int interrupt_init(void)
+{
+	return (0);
+}
+
+void udelay(unsigned long usec)
+{
+	unsigned long delay, start, stop;
+	unsigned long cclk;
+	cclk = (CONFIG_CCLK_HZ);
+
+	while (usec > 1) {
+		/*
+		 * how many clock ticks to delay?
+		 *  - request(in useconds) * clock_ticks(Hz) / useconds/second
+		 */
+		if (usec < 1000) {
+			delay = (usec * (cclk / 244)) >> 12;
+			usec = 0;
+		} else {
+			delay = (1000 * (cclk / 244)) >> 12;
+			usec -= 1000;
+		}
+
+		asm volatile (" %0 = CYCLES;":"=r" (start));
+		do {
+			asm volatile (" %0 = CYCLES; ":"=r" (stop));
+		} while (stop - start < delay);
+	}
+
+	return;
+}
+
+void timer_init(void)
+{
+	*pTCNTL = 0x1;
+	*pTSCALE = 0x0;
+	*pTCOUNT = MAX_TIM_LOAD;
+	*pTPERIOD = MAX_TIM_LOAD;
+	*pTCNTL = 0x7;
+	asm("CSYNC;");
+
+	timestamp = 0;
+	last_time = 0;
+}
+
+/* Any network command or flash
+ * command is started get_timer shall
+ * be called before TCOUNT gets reset,
+ * to implement the accurate timeouts.
+ *
+ * How ever milliconds doesn't return
+ * the number that has been elapsed from
+ * the last reset.
+ *
+ *  As get_timer is used in the u-boot
+ *  only for timeouts this should be
+ *  sufficient
+ */
+ulong get_timer(ulong base)
+{
+	ulong milisec;
+
+	/* Number of clocks elapsed */
+	ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT));
+
+	/**
+	 * Find if the TCOUNT is reset
+	 * timestamp gives the number of times
+	 * TCOUNT got reset
+	 */
+	if (clocks < last_time)
+		timestamp++;
+	last_time = clocks;
+
+	/* Get the number of milliseconds */
+	milisec = clocks / (CONFIG_CCLK_HZ / 1000);
+
+	/**
+	 * Find the number of millisonds
+	 * that got elapsed before this TCOUNT cycle
+	 */
+	milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000));
+
+	return (milisec - base);
+}
+
+void reset_timer (void)
+{
+	timestamp = 0;
+}

cpu/bf537/ints.c

@@ -0,0 +1,117 @@
+/*
+ * U-boot - ints.c Interrupt related routines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on ints.c
+ *
+ * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin
+ *             drivers
+ *
+ * Copyright 1996 Roman Zippel
+ * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * Copyright 2003 Metrowerks/Motorola
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/stddef.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/traps.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+#include <asm/blackfin.h>
+#include "cpu.h"
+
+void blackfin_irq_panic(int reason, struct pt_regs *regs)
+{
+	printf("\n\nException: IRQ 0x%x entered\n", reason);
+	printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f));
+	printf("stack frame=0x%x, ", (unsigned int)regs);
+	printf("bad PC=0x%04x\n", (unsigned int)regs->pc);
+	dump(regs);
+	printf("Unhandled IRQ or exceptions!\n");
+	printf("Please reset the board \n");
+}
+
+void blackfin_init_IRQ(void)
+{
+	*(unsigned volatile long *)(SIC_IMASK) = SIC_UNMASK_ALL;
+	cli();
+#ifndef CONFIG_KGDB
+	*(unsigned volatile long *)(EVT_EMULATION_ADDR) = 0x0;
+#endif
+	*(unsigned volatile long *)(EVT_NMI_ADDR) =
+	    (unsigned volatile long)evt_nmi;
+	*(unsigned volatile long *)(EVT_EXCEPTION_ADDR) =
+	    (unsigned volatile long)trap;
+	*(unsigned volatile long *)(EVT_HARDWARE_ERROR_ADDR) =
+	    (unsigned volatile long)evt_ivhw;
+	*(unsigned volatile long *)(EVT_RESET_ADDR) =
+	    (unsigned volatile long)evt_rst;
+	*(unsigned volatile long *)(EVT_TIMER_ADDR) =
+	    (unsigned volatile long)evt_timer;
+	*(unsigned volatile long *)(EVT_IVG7_ADDR) =
+	    (unsigned volatile long)evt_evt7;
+	*(unsigned volatile long *)(EVT_IVG8_ADDR) =
+	    (unsigned volatile long)evt_evt8;
+	*(unsigned volatile long *)(EVT_IVG9_ADDR) =
+	    (unsigned volatile long)evt_evt9;
+	*(unsigned volatile long *)(EVT_IVG10_ADDR) =
+	    (unsigned volatile long)evt_evt10;
+	*(unsigned volatile long *)(EVT_IVG11_ADDR) =
+	    (unsigned volatile long)evt_evt11;
+	*(unsigned volatile long *)(EVT_IVG12_ADDR) =
+	    (unsigned volatile long)evt_evt12;
+	*(unsigned volatile long *)(EVT_IVG13_ADDR) =
+	    (unsigned volatile long)evt_evt13;
+	*(unsigned volatile long *)(EVT_IVG14_ADDR) =
+	    (unsigned volatile long)evt_system_call;
+	*(unsigned volatile long *)(EVT_IVG15_ADDR) =
+	    (unsigned volatile long)evt_soft_int1;
+	*(volatile unsigned long *)ILAT = 0;
+	asm("csync;");
+	sti();
+	*(volatile unsigned long *)IMASK = 0xffbf;
+	asm("csync;");
+}
+
+void exception_handle(void)
+{
+#if defined (CONFIG_PANIC_HANG)
+	display_excp();
+#else
+	udelay(100000);		/* allow messages to go out */
+	do_reset(NULL, 0, 0, NULL);
+#endif
+}
+
+void display_excp(void)
+{
+	printf("Exception!\n");
+}

cpu/bf537/serial.c

@@ -0,0 +1,194 @@
+/*
+ * U-boot - serial.c Serial driver for BF537
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on
+ * bf537_serial.c: Serial driver for BlackFin BF537 internal UART.
+ * Copyright (c) 2003	Bas Vermeulen <bas@buyways.nl>,
+ * 			BuyWays B.V. (www.buyways.nl)
+ *
+ * Based heavily on blkfinserial.c
+ * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs.
+ * Copyright(c) 2003	Metrowerks	<mwaddel@metrowerks.com>
+ * Copyright(c)	2001	Tony Z. Kou	<tonyko@arcturusnetworks.com>
+ * Copyright(c)	2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com>
+ *
+ * Based on code from 68328 version serial driver imlpementation which was:
+ * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
+ * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/segment.h>
+#include <asm/bitops.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include "serial.h"
+
+unsigned long pll_div_fact;
+
+void calc_baud(void)
+{
+	unsigned char i;
+	int temp;
+	u_long sclk = get_sclk();
+
+	for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) {
+		temp = sclk / (baud_table[i] * 8);
+		if ((temp & 0x1) == 1) {
+			temp++;
+		}
+		temp = temp / 2;
+		hw_baud_table[i].dl_high = (temp >> 8) & 0xFF;
+		hw_baud_table[i].dl_low = (temp) & 0xFF;
+	}
+}
+
+void serial_setbrg(void)
+{
+	int i;
+	DECLARE_GLOBAL_DATA_PTR;
+
+	calc_baud();
+
+	for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) {
+		if (gd->baudrate == baud_table[i])
+			break;
+	}
+
+	/* Enable UART */
+	*pUART_GCTL |= UART_GCTL_UCEN;
+	sync();
+
+	/* Set DLAB in LCR to Access DLL and DLH */
+	ACCESS_LATCH;
+	sync();
+
+	*pUART_DLL = hw_baud_table[i].dl_low;
+	sync();
+	*pUART_DLH = hw_baud_table[i].dl_high;
+	sync();
+
+	/* Clear DLAB in LCR to Access THR RBR IER */
+	ACCESS_PORT_IER;
+	sync();
+
+	/* Enable  ERBFI and ELSI interrupts
+	 * to poll SIC_ISR register*/
+	*pUART_IER = UART_IER_ELSI | UART_IER_ERBFI | UART_IER_ETBEI;
+	sync();
+
+	/* Set LCR to Word Lengh 8-bit word select */
+	*pUART_LCR = UART_LCR_WLS8;
+	sync();
+
+	return;
+}
+
+int serial_init(void)
+{
+	serial_setbrg();
+	return (0);
+}
+
+void serial_putc(const char c)
+{
+	if ((*pUART_LSR) & UART_LSR_TEMT) {
+		if (c == '\n')
+			serial_putc('\r');
+
+		local_put_char(c);
+	}
+
+	while (!((*pUART_LSR) & UART_LSR_TEMT))
+		SYNC_ALL;
+
+	return;
+}
+
+int serial_tstc(void)
+{
+	if (*pUART_LSR & UART_LSR_DR)
+		return 1;
+	else
+		return 0;
+}
+
+int serial_getc(void)
+{
+	unsigned short uart_lsr_val, uart_rbr_val;
+	unsigned long isr_val;
+	int ret;
+
+	/* Poll for RX Interrupt */
+	while (!((isr_val =
+		  *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT)) ;
+	asm("csync;");
+
+	uart_lsr_val = *pUART_LSR;	/* Clear status bit */
+	uart_rbr_val = *pUART_RBR;	/* getc() */
+
+	if (isr_val & IRQ_UART_ERROR_BIT) {
+		ret = -1;
+	} else {
+		ret = uart_rbr_val & 0xff;
+	}
+
+	return ret;
+}
+
+void serial_puts(const char *s)
+{
+	while (*s) {
+		serial_putc(*s++);
+	}
+}
+
+static void local_put_char(char ch)
+{
+	int flags = 0;
+	unsigned long isr_val;
+
+	save_and_cli(flags);
+
+	/* Poll for TX Interruput */
+	while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT)) ;
+	asm("csync;");
+
+	*pUART_THR = ch;	/* putc() */
+
+	if (isr_val & IRQ_UART_ERROR_BIT) {
+		printf("?");
+	}
+
+	restore_flags(flags);
+
+	return;
+}

cpu/bf537/serial.h

@@ -0,0 +1,77 @@
+/*
+ * U-boot - bf537_serial.h Serial Driver defines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on
+ * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
+ * Copyright (C) 2003	Bas Vermeulen <bas@buyways.nl>
+ * 			BuyWays B.V. (www.buyways.nl)
+ *
+ * Based heavily on:
+ * blkfinserial.h: Definitions for the BlackFin DSP serial driver.
+ *
+ * Copyright (C) 2001	Tony Z. Kou	tonyko@arcturusnetworks.com
+ * Copyright (C) 2001   Arcturus Networks Inc. <www.arcturusnetworks.com>
+ *
+ * Based on code from 68328serial.c which was:
+ * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
+ * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _Bf537_SERIAL_H
+#define _Bf537_SERIAL_H
+
+#include <linux/config.h>
+#include <asm/blackfin.h>
+
+#define SYNC_ALL	__asm__ __volatile__ ("ssync;\n")
+#define ACCESS_LATCH	*pUART_LCR |= UART_LCR_DLAB;
+#define ACCESS_PORT_IER	*pUART_LCR &= (~UART_LCR_DLAB);
+
+void serial_setbrg(void);
+static void local_put_char(char ch);
+void calc_baud(void);
+void serial_setbrg(void);
+int serial_init(void);
+void serial_putc(const char c);
+int serial_tstc(void);
+int serial_getc(void);
+void serial_puts(const char *s);
+static void local_put_char(char ch);
+
+int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 };
+
+struct {
+	unsigned char dl_high;
+	unsigned char dl_low;
+} hw_baud_table[5];
+
+#ifdef CONFIG_STAMP
+extern unsigned long pll_div_fact;
+#endif
+
+#endif

cpu/bf537/start.S

@@ -0,0 +1,579 @@
+/*
+ * U-boot - start.S Startup file of u-boot for BF537
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on head.S
+ * Copyright (c) 2003  Metrowerks/Motorola
+ * Copyright (C) 1998  D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
+ *                     Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ * (c) 1995, Dionne & Associates
+ * (c) 1995, DKG Display Tech.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Note: A change in this file subsequently requires a change in
+ *       board/$(board_name)/config.mk for a valid u-boot.bin
+ */
+
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+
+.global _stext;
+.global __bss_start;
+.global start;
+.global _start;
+.global _rambase;
+.global _ramstart;
+.global _ramend;
+.global _bf533_data_dest;
+.global _bf533_data_size;
+.global edata;
+.global _initialize;
+.global _exit;
+.global flashdataend;
+.global init_sdram;
+.global _icache_enable;
+.global _dcache_enable;
+#if defined(CONFIG_BF537)&&defined(CONFIG_POST)
+.global _memory_post_test;
+.global _post_flag;
+#endif
+
+#if (BFIN_BOOT_MODE == BF537_UART_BOOT)
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV   CONFIG_CCLK_DIV_not_defined_properly
+#endif
+#endif
+
+.text
+_start:
+start:
+_stext:
+
+	R0 = 0x32;
+	SYSCFG = R0;
+	SSYNC;
+
+	/* As per HW reference manual DAG registers,
+	 * DATA and Address resgister shall be zero'd
+	 * in initialization, after a reset state
+	 */
+	r1 = 0;	/* Data registers zero'd */
+	r2 = 0;
+	r3 = 0;
+	r4 = 0;
+	r5 = 0;
+	r6 = 0;
+	r7 = 0;
+
+	p0 = 0; /* Address registers zero'd */
+	p1 = 0;
+	p2 = 0;
+	p3 = 0;
+	p4 = 0;
+	p5 = 0;
+
+	i0 = 0; /* DAG Registers zero'd */
+	i1 = 0;
+	i2 = 0;
+	i3 = 0;
+	m0 = 0;
+	m1 = 0;
+	m3 = 0;
+	m3 = 0;
+	l0 = 0;
+	l1 = 0;
+	l2 = 0;
+	l3 = 0;
+	b0 = 0;
+	b1 = 0;
+	b2 = 0;
+	b3 = 0;
+
+	/* Set loop counters to zero, to make sure that
+	 * hw loops are disabled.
+	 */
+	r0  = 0;
+	lc0 = r0;
+	lc1 = r0;
+
+	SSYNC;
+
+	/* Check soft reset status */
+	p0.h = SWRST >> 16;
+	p0.l = SWRST & 0xFFFF;
+	r0.l = w[p0];
+
+	cc = bittst(r0, 15);
+	if !cc jump no_soft_reset;
+
+	/* Clear Soft reset */
+	r0 = 0x0000;
+	w[p0] = r0;
+	ssync;
+
+no_soft_reset:
+	nop;
+
+	/* Clear EVT registers */
+	p0.h = (EVT_EMULATION_ADDR >> 16);
+	p0.l = (EVT_EMULATION_ADDR & 0xFFFF);
+	p0 += 8;
+	p1 = 14;
+	r1 = 0;
+	LSETUP(4,4) lc0 = p1;
+	[ p0 ++ ] = r1;
+
+#if (BFIN_BOOT_MODE != BF537_SPI_MASTER_BOOT)
+	p0.h = hi(SIC_IWR);
+	p0.l = lo(SIC_IWR);
+	r0.l = 0x1;
+	w[p0] = r0.l;
+	SSYNC;
+#endif
+
+#if (BFIN_BOOT_MODE == BF537_UART_BOOT)
+
+	p0.h = hi(SIC_IWR);
+	p0.l = lo(SIC_IWR);
+	r0.l = 0x1;
+	w[p0] = r0.l;
+	SSYNC;
+
+	/*
+	* PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable
+	*/
+	p0.h = hi(PLL_LOCKCNT);
+	p0.l = lo(PLL_LOCKCNT);
+	r0 = 0x300(Z);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	* Put SDRAM in self-refresh, incase anything is running
+	*/
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITSET (R0, 24);
+	[P2] = R0;
+	SSYNC;
+
+	/*
+	*  Set PLL_CTL with the value that we calculate in R0
+	*   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	*   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
+	*   - [7]     = output delay (add 200ps of delay to mem signals)
+	*   - [6]     = input delay (add 200ps of input delay to mem signals)
+	*   - [5]     = PDWN      : 1=All Clocks off
+	*   - [3]     = STOPCK    : 1=Core Clock off
+	*   - [1]     = PLL_OFF   : 1=Disable Power to PLL
+	*   - [0]     = DF	  : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+	*   all other bits set to zero
+	*/
+
+	r0 = CONFIG_VCO_MULT & 63;      /* Load the VCO multiplier         */
+	r0 = r0 << 9;                   /* Shift it over,                  */
+	r1 = CONFIG_CLKIN_HALF;        /* Do we need to divide CLKIN by 2?*/
+	r0 = r1 | r0;
+	r1 = CONFIG_PLL_BYPASS;         /* Bypass the PLL?                 */
+	r1 = r1 << 8;                   /* Shift it over                   */
+	r0 = r1 | r0;                   /* add them all together           */
+
+	p0.h = hi(PLL_CTL);
+	p0.l = lo(PLL_CTL);             /* Load the address                */
+	cli r2;                         /* Disable interrupts              */
+		ssync;
+	w[p0] = r0.l;                   /* Set the value                   */
+	idle;                           /* Wait for the PLL to stablize    */
+	sti r2;                         /* Enable interrupts               */
+
+check_again:
+	p0.h = hi(PLL_STAT);
+	p0.l = lo(PLL_STAT);
+	R0 = W[P0](Z);
+	CC = BITTST(R0,5);
+	if ! CC jump check_again;
+
+	/* Configure SCLK & CCLK Dividers */
+	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+	p0.h = hi(PLL_DIV);
+	p0.l = lo(PLL_DIV);
+	w[p0] = r0.l;
+	ssync;
+#endif
+
+	/*
+	 * We now are running at speed, time to set the Async mem bank wait states
+	 * This will speed up execution, since we are normally running from FLASH.
+	 * we need to read MAC address from FLASH
+	 */
+	p2.h = (EBIU_AMBCTL1 >> 16);
+	p2.l = (EBIU_AMBCTL1 & 0xFFFF);
+	r0.h = (AMBCTL1VAL >> 16);
+	r0.l = (AMBCTL1VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMBCTL0 >> 16);
+	p2.l = (EBIU_AMBCTL0 & 0xFFFF);
+	r0.h = (AMBCTL0VAL >> 16);
+	r0.l = (AMBCTL0VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMGCTL >> 16);
+	p2.l = (EBIU_AMGCTL & 0xffff);
+	r0 = AMGCTLVAL;
+	w[p2] = r0;
+	ssync;
+
+#if ((BFIN_BOOT_MODE != BF537_SPI_MASTER_BOOT) && (BFIN_BOOT_MODE != BF537_UART_BOOT))
+	sp.l = (0xffb01000 & 0xFFFF);
+	sp.h = (0xffb01000 >> 16);
+
+	call init_sdram;
+#endif
+
+
+#if defined(CONFIG_BF537)&&defined(CONFIG_POST)
+	/* DMA POST code to Hi of L1 SRAM */
+postcopy:
+	/* P1 Points to the beginning of SYSTEM MMR Space */
+	P1.H = hi(SYSMMR_BASE);
+	P1.L = lo(SYSMMR_BASE);
+
+	R0.H = _text_l1;
+	R0.L = _text_l1;
+	R1.H = _etext_l1;
+	R1.L = _etext_l1;
+	R2 = R1 - R0;           /* Count */
+	R0.H = _etext;
+	R0.L = _etext;
+	R1.H = (CFG_MONITOR_BASE >> 16);
+	R1.L = (CFG_MONITOR_BASE & 0xFFFF);
+	R0 = R0 - R1;
+	R1.H = (CFG_FLASH_BASE >> 16);
+	R1.L = (CFG_FLASH_BASE & 0xFFFF);
+	R0 = R0 + R1;		/* Source Address */
+	R1.H = hi(L1_ISRAM);    /* Destination Address (high) */
+	R1.L = lo(L1_ISRAM);    /* Destination Address (low) */
+	R3.L = DMAEN;           /* Source DMAConfig Value (8-bit words) */
+	/* Destination DMAConfig Value (8-bit words) */
+	R4.L = (DI_EN | WNR | DMAEN);
+
+	R6 = 0x1 (Z);
+	W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6;   /* Source Modify = 1 */
+	W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6;   /* Destination Modify = 1 */
+
+	[P1+OFFSET_(MDMA_S0_START_ADDR)] = R0;  /* Set Source Base Address */
+	W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2;    /* Set Source Count */
+	/* Set Source  DMAConfig = DMA Enable,
+	Memory Read,  8-Bit Transfers, 1-D DMA, Flow - Stop */
+	W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3;
+
+	[P1+OFFSET_(MDMA_D0_START_ADDR)] = R1;  /* Set Destination Base Address */
+	W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2;    /* Set Destination Count */
+	/* Set Destination DMAConfig = DMA Enable,
+	Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
+	W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4;
+
+POST_DMA_DONE:
+	p0.h = hi(MDMA_D0_IRQ_STATUS);
+	p0.l = lo(MDMA_D0_IRQ_STATUS);
+	R0 = W[P0](Z);
+	CC = BITTST(R0, 0);
+	if ! CC jump POST_DMA_DONE
+
+	R0 = 0x1;
+	W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */
+
+	/* DMA POST data to Hi of L1 SRAM */
+	R0.H = _rodata_l1;
+	R0.L = _rodata_l1;
+	R1.H = _erodata_l1;
+	R1.L = _erodata_l1;
+	R2 = R1 - R0;           /* Count */
+	R0.H = _erodata;
+	R0.L = _erodata;
+	R1.H = (CFG_MONITOR_BASE >> 16);
+	R1.L = (CFG_MONITOR_BASE & 0xFFFF);
+	R0 = R0 - R1;
+	R1.H = (CFG_FLASH_BASE >> 16);
+	R1.L = (CFG_FLASH_BASE & 0xFFFF);
+	R0 = R0 + R1;           /* Source Address */
+	R1.H = hi(DATA_BANKB_SRAM);    /* Destination Address (high) */
+	R1.L = lo(DATA_BANKB_SRAM);    /* Destination Address (low) */
+	R3.L = DMAEN;           /* Source DMAConfig Value (8-bit words) */
+	R4.L = (DI_EN | WNR | DMAEN);   /* Destination DMAConfig Value (8-bit words) */
+
+	R6 = 0x1 (Z);
+	W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6;   /* Source Modify = 1 */
+	W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6;   /* Destination Modify = 1 */
+
+	[P1+OFFSET_(MDMA_S0_START_ADDR)] = R0;  /* Set Source Base Address */
+	W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2;    /* Set Source Count */
+	/* Set Source  DMAConfig = DMA Enable,
+	Memory Read,  8-Bit Transfers, 1-D DMA, Flow - Stop */
+	W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3;
+
+	[P1+OFFSET_(MDMA_D0_START_ADDR)] = R1;  /* Set Destination Base Address */
+	W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2;    /* Set Destination Count */
+	/* Set Destination DMAConfig = DMA Enable,
+	Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
+	W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4;
+
+POST_DATA_DMA_DONE:
+	p0.h = hi(MDMA_D0_IRQ_STATUS);
+	p0.l = lo(MDMA_D0_IRQ_STATUS);
+	R0 = W[P0](Z);
+	CC = BITTST(R0, 0);
+	if ! CC jump POST_DATA_DMA_DONE
+
+	R0 = 0x1;
+	W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */
+
+	p0.l = _memory_post_test;
+	p0.h = _memory_post_test;
+	r0 = 0x0;
+	call (p0);
+	r7 = r0;				/* save return value */
+
+	call init_sdram;
+#endif
+
+	/* relocate into to RAM */
+	call get_pc;
+offset:
+	r2.l = offset;
+	r2.h = offset;
+	r3.l = start;
+	r3.h = start;
+	r1 = r2 - r3;
+
+	r0 = r0 - r1;
+	p1 = r0;
+
+	p2.l = (CFG_MONITOR_BASE & 0xffff);
+	p2.h = (CFG_MONITOR_BASE >> 16);
+
+	p3 = 0x04;
+	p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff);
+	p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16);
+loop1:
+	r1 = [p1 ++ p3];
+	[p2 ++ p3] = r1;
+	cc=p2==p4;
+	if !cc jump loop1;
+	/*
+	 * configure STACK
+	 */
+	r0.h = (CONFIG_STACKBASE >> 16);
+	r0.l = (CONFIG_STACKBASE & 0xFFFF);
+	sp = r0;
+	fp = sp;
+
+	/*
+	 * This next section keeps the processor in supervisor mode
+	 * during kernel boot.  Switches to user mode at end of boot.
+	 * See page 3-9 of Hardware Reference manual for documentation.
+	 */
+
+	/* To keep ourselves in the supervisor mode */
+	p0.l = (EVT_IVG15_ADDR & 0xFFFF);
+	p0.h = (EVT_IVG15_ADDR >> 16);
+
+	p1.l = _real_start;
+	p1.h = _real_start;
+	[p0] = p1;
+
+	p0.l = (IMASK & 0xFFFF);
+	p0.h = (IMASK >> 16);
+	r0.l = LO(IVG15_POS);
+	r0.h = HI(IVG15_POS);
+	[p0] = r0;
+	raise 15;
+	p0.l = WAIT_HERE;
+	p0.h = WAIT_HERE;
+	reti = p0;
+	rti;
+
+WAIT_HERE:
+	jump WAIT_HERE;
+
+.global _real_start;
+_real_start:
+	[ -- sp ] = reti;
+
+#ifdef CONFIG_BF537
+/* Initialise General-Purpose I/O Modules on BF537
+ * Rev 0.0 Anomaly 05000212 - PORTx_FER,
+ * PORT_MUX Registers Do Not accept "writes" correctly
+ */
+	p0.h = hi(PORTF_FER);
+	p0.l = lo(PORTF_FER);
+	R0.L = W[P0]; /* Read */
+	nop;
+	nop;
+	nop;
+	ssync;
+	R0 = 0x000F(Z);
+	W[P0] = R0.L; /* Write */
+	nop;
+	nop;
+	nop;
+	ssync;
+	W[P0] = R0.L; /* Enable peripheral function of PORTF for UART0 and UART1 */
+	nop;
+	nop;
+	nop;
+	ssync;
+
+	p0.h = hi(PORTH_FER);
+	p0.l = lo(PORTH_FER);
+	R0.L = W[P0]; /* Read */
+	nop;
+	nop;
+	nop;
+	ssync;
+	R0 = 0xFFFF(Z);
+	W[P0] = R0.L; /* Write */
+	nop;
+	nop;
+	nop;
+	ssync;
+	W[P0] = R0.L; /* Enable peripheral function of PORTH for MAC */
+	nop;
+	nop;
+	nop;
+	ssync;
+
+#endif
+
+	/* DMA reset code to Hi of L1 SRAM */
+copy:
+	P1.H = hi(SYSMMR_BASE);	/* P1 Points to the beginning of SYSTEM MMR Space */
+	P1.L = lo(SYSMMR_BASE);
+
+	R0.H = reset_start;	/* Source Address (high) */
+	R0.L = reset_start;	/* Source Address (low) */
+	R1.H = reset_end;
+	R1.L = reset_end;
+	R2 = R1 - R0;		/* Count */
+	R1.H = hi(L1_ISRAM);	/* Destination Address (high) */
+	R1.L = lo(L1_ISRAM);	/* Destination Address (low) */
+	R3.L = DMAEN;		/* Source DMAConfig Value (8-bit words) */
+	R4.L = (DI_EN | WNR | DMAEN);	/* Destination DMAConfig Value (8-bit words) */
+
+DMA:
+	R6 = 0x1 (Z);
+	W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6;	/* Source Modify = 1 */
+	W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6;	/* Destination Modify = 1 */
+
+	[P1+OFFSET_(MDMA_S0_START_ADDR)] = R0;	/* Set Source Base Address */
+	W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2;	/* Set Source Count */
+	/* Set Source  DMAConfig = DMA Enable,
+	Memory Read,  8-Bit Transfers, 1-D DMA, Flow - Stop */
+	W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3;
+
+	[P1+OFFSET_(MDMA_D0_START_ADDR)] = R1;	/* Set Destination Base Address */
+	W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2;	/* Set Destination Count */
+	/* Set Destination DMAConfig = DMA Enable,
+	Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
+	W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4;
+
+WAIT_DMA_DONE:
+	p0.h = hi(MDMA_D0_IRQ_STATUS);
+	p0.l = lo(MDMA_D0_IRQ_STATUS);
+	R0 = W[P0](Z);
+	CC = BITTST(R0, 0);
+	if ! CC jump WAIT_DMA_DONE
+
+	R0 = 0x1;
+	W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0;	/* Write 1 to clear DMA interrupt */
+
+	/* Initialize BSS Section with 0 s */
+	p1.l = __bss_start;
+	p1.h = __bss_start;
+	p2.l = _end;
+	p2.h = _end;
+	r1 = p1;
+	r2 = p2;
+	r3 = r2 - r1;
+	r3 = r3 >> 2;
+	p3 = r3;
+	lsetup (_clear_bss, _clear_bss_end ) lc1 = p3;
+	CC = p2<=p1;
+	if CC jump _clear_bss_skip;
+	r0 = 0;
+_clear_bss:
+_clear_bss_end:
+	[p1++] = r0;
+_clear_bss_skip:
+
+#if defined(CONFIG_BF537)&&defined(CONFIG_POST)
+	p0.l = _post_flag;
+	p0.h = _post_flag;
+	r0   = r7;
+	[p0] = r0;
+#endif
+
+	p0.l = _start1;
+	p0.h = _start1;
+	jump (p0);
+
+reset_start:
+	p0.h = WDOG_CNT >> 16;
+	p0.l = WDOG_CNT & 0xffff;
+	r0 = 0x0010;
+	w[p0] = r0;
+	p0.h = WDOG_CTL >> 16;
+	p0.l = WDOG_CTL & 0xffff;
+	r0 = 0x0000;
+	w[p0] = r0;
+reset_wait:
+	jump reset_wait;
+
+reset_end:
+	nop;
+
+_exit:
+	jump.s	_exit;
+get_pc:
+	r0 = rets;
+	rts;

cpu/bf537/start1.S

@@ -1,6 +1,7 @@
 /*
- * (C) Copyright 2004
+ * U-boot - start1.S Code running out of RAM after relocation
- * Pantelis Antoniou, Intracom S.A. , panto@intracom.gr
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -21,28 +22,17 @@
  * MA 02111-1307 USA
  */
 
-#include <common.h>
+#define ASSEMBLY
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
 
-/*
+.global	start1;
- * DSP test
+.global	_start1;
- *
- * This test verifies the connection and performs a memory test
- * on any connected DSP(s). The meat of the work is done
- * in the board specific function.
- */
 
-#ifdef CONFIG_POST
+.text
-
+_start1:
-#include <post.h>
+start1:
-
+	sp += -12;
-#if CONFIG_POST & CFG_POST_DSP
+	call	_board_init_f;
-
+	sp += 12;
-extern int board_post_dsp(int flags);
-
-int dsp_post_test (int flags)
-{
-	return board_post_dsp(flags);
-}
-
-#endif /* CONFIG_POST & CFG_POST_DSP */
-#endif /* CONFIG_POST */

cpu/bf537/traps.c

@@ -0,0 +1,241 @@
+/*
+ * U-boot - traps.c Routines related to interrupts and exceptions
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on
+ * No original Copyright holder listed,
+ * Probabily original (C) Roman Zippel (assigned DJD, 1999)
+ *
+ * Copyright 2003 Metrowerks - for Blackfin
+ * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca>
+ * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <asm/errno.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/page.h>
+#include <asm/machdep.h>
+#include "cpu.h"
+#include <asm/arch/anomaly.h>
+#include <asm/cplb.h>
+#include <asm/io.h>
+
+void init_IRQ(void)
+{
+	blackfin_init_IRQ();
+	return;
+}
+
+void process_int(unsigned long vec, struct pt_regs *fp)
+{
+	printf("interrupt\n");
+	return;
+}
+
+extern unsigned int icplb_table[page_descriptor_table_size][2];
+extern unsigned int dcplb_table[page_descriptor_table_size][2];
+
+unsigned long last_cplb_fault_retx;
+
+static unsigned int cplb_sizes[4] =
+    { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 };
+
+void trap_c(struct pt_regs *regs)
+{
+	unsigned int addr;
+	unsigned long trapnr = (regs->seqstat) & SEQSTAT_EXCAUSE;
+	unsigned int i, j, size, *I0, *I1;
+	unsigned short data = 0;
+
+	switch (trapnr) {
+		/* 0x26 - Data CPLB Miss */
+	case VEC_CPLB_M:
+
+#ifdef ANOMALY_05000261
+		/*
+		 * Work around an anomaly: if we see a new DCPLB fault,
+		 * return without doing anything. Then,
+		 * if we get the same fault again, handle it.
+		 */
+		addr = last_cplb_fault_retx;
+		last_cplb_fault_retx = regs->retx;
+		printf("this time, curr = 0x%08x last = 0x%08x\n",
+		       addr, last_cplb_fault_retx);
+		if (addr != last_cplb_fault_retx)
+			goto trap_c_return;
+#endif
+		data = 1;
+
+	case VEC_CPLB_I_M:
+
+		if (data) {
+			addr = *pDCPLB_FAULT_ADDR;
+		} else {
+			addr = *pICPLB_FAULT_ADDR;
+		}
+		for (i = 0; i < page_descriptor_table_size; i++) {
+			if (data) {
+				size = cplb_sizes[dcplb_table[i][1] >> 16];
+				j = dcplb_table[i][0];
+			} else {
+				size = cplb_sizes[icplb_table[i][1] >> 16];
+				j = icplb_table[i][0];
+			}
+			if ((j <= addr) && ((j + size) > addr)) {
+				debug("found %i 0x%08x\n", i, j);
+				break;
+			}
+		}
+		if (i == page_descriptor_table_size) {
+			printf("something is really wrong\n");
+			do_reset(NULL, 0, 0, NULL);
+		}
+
+		/* Turn the cache off */
+		if (data) {
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)DMEM_CONTROL &=
+			    ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+			sync();
+		} else {
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB);
+			sync();
+		}
+
+		if (data) {
+			I0 = (unsigned int *)DCPLB_ADDR0;
+			I1 = (unsigned int *)DCPLB_DATA0;
+		} else {
+			I0 = (unsigned int *)ICPLB_ADDR0;
+			I1 = (unsigned int *)ICPLB_DATA0;
+		}
+
+		j = 0;
+		while (*I1 & CPLB_LOCK) {
+			debug("skipping %i %08p - %08x\n", j, I1, *I1);
+			*I0++;
+			*I1++;
+			j++;
+		}
+
+		debug("remove %i 0x%08x  0x%08x\n", j, *I0, *I1);
+
+		for (; j < 15; j++) {
+			debug("replace %i 0x%08x  0x%08x\n", j, I0, I0 + 1);
+			*I0++ = *(I0 + 1);
+			*I1++ = *(I1 + 1);
+		}
+
+		if (data) {
+			*I0 = dcplb_table[i][0];
+			*I1 = dcplb_table[i][1];
+			I0 = (unsigned int *)DCPLB_ADDR0;
+			I1 = (unsigned int *)DCPLB_DATA0;
+		} else {
+			*I0 = icplb_table[i][0];
+			*I1 = icplb_table[i][1];
+			I0 = (unsigned int *)ICPLB_ADDR0;
+			I1 = (unsigned int *)ICPLB_DATA0;
+		}
+
+		for (j = 0; j < 16; j++) {
+			debug("%i 0x%08x  0x%08x\n", j, *I0++, *I1++);
+		}
+
+		/* Turn the cache back on */
+		if (data) {
+			j = *(unsigned int *)DMEM_CONTROL;
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)DMEM_CONTROL =
+			    ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j;
+			sync();
+		} else {
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)IMEM_CONTROL = IMC | ENICPLB;
+			sync();
+		}
+
+		break;
+	default:
+		/* All traps come here */
+		printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f));
+		printf("stack frame=0x%x, ", (unsigned int)regs);
+		printf("bad PC=0x%04x\n", (unsigned int)regs->pc);
+		dump(regs);
+		printf("\n\n");
+
+		printf("Unhandled IRQ or exceptions!\n");
+		printf("Please reset the board \n");
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+trap_c_return:
+	return;
+
+}
+
+void dump(struct pt_regs *fp)
+{
+	debug("RETE:  %08lx  RETN: %08lx  RETX: %08lx  RETS: %08lx\n",
+		 fp->rete, fp->retn, fp->retx, fp->rets);
+	debug("IPEND: %04lx  SYSCFG: %04lx\n", fp->ipend, fp->syscfg);
+	debug("SEQSTAT: %08lx    SP: %08lx\n", (long)fp->seqstat, (long)fp);
+	debug("R0: %08lx    R1: %08lx    R2: %08lx    R3: %08lx\n",
+		 fp->r0, fp->r1, fp->r2, fp->r3);
+	debug("R4: %08lx    R5: %08lx    R6: %08lx    R7: %08lx\n",
+		 fp->r4, fp->r5, fp->r6, fp->r7);
+	debug("P0: %08lx    P1: %08lx    P2: %08lx    P3: %08lx\n",
+		 fp->p0, fp->p1, fp->p2, fp->p3);
+	debug("P4: %08lx    P5: %08lx    FP: %08lx\n",
+		 fp->p4, fp->p5, fp->fp);
+	debug("A0.w: %08lx    A0.x: %08lx    A1.w: %08lx    A1.x: %08lx\n",
+		 fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+	debug("LB0: %08lx  LT0: %08lx  LC0: %08lx\n",
+		 fp->lb0, fp->lt0, fp->lc0);
+	debug("LB1: %08lx  LT1: %08lx  LC1: %08lx\n",
+		 fp->lb1, fp->lt1, fp->lc1);
+	debug("B0: %08lx  L0: %08lx  M0: %08lx  I0: %08lx\n",
+		 fp->b0, fp->l0, fp->m0, fp->i0);
+	debug("B1: %08lx  L1: %08lx  M1: %08lx  I1: %08lx\n",
+		 fp->b1, fp->l1, fp->m1, fp->i1);
+	debug("B2: %08lx  L2: %08lx  M2: %08lx  I2: %08lx\n",
+		 fp->b2, fp->l2, fp->m2, fp->i2);
+	debug("B3: %08lx  L3: %08lx  M3: %08lx  I3: %08lx\n",
+		 fp->b3, fp->l3, fp->m3, fp->i3);
+
+	debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR);
+	debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR);
+
+}

cpu/bf537/video.c

@@ -0,0 +1,194 @@
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ * (C) Copyright 2002
+ * Wolfgang Denk, wd@denx.de
+ * (C) Copyright 2006
+ * Aubrey Li, aubrey.li@analog.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <stdarg.h>
+#include <common.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <i2c.h>
+#include <linux/types.h>
+#include <devices.h>
+
+#ifdef CONFIG_VIDEO
+#define NTSC_FRAME_ADDR 0x06000000
+#include "video.h"
+
+/* NTSC OUTPUT SIZE  720 * 240 */
+#define VERTICAL	2
+#define HORIZONTAL	4
+
+int is_vblank_line(const int line)
+{
+	/*
+	 *  This array contains a single bit for each line in
+	 *  an NTSC frame.
+	 */
+	if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528))
+		return true;
+
+	return false;
+}
+
+int NTSC_framebuffer_init(char *base_address)
+{
+	const int NTSC_frames = 1;
+	const int NTSC_lines = 525;
+	char *dest = base_address;
+	int frame_num, line_num;
+
+	for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) {
+		for (line_num = 1; line_num <= NTSC_lines; ++line_num) {
+			unsigned int code;
+			int offset = 0;
+			int i;
+
+			if (is_vblank_line(line_num))
+				offset++;
+
+			if (line_num > 266 || line_num < 3)
+				offset += 2;
+
+			/* Output EAV code */
+			code = SystemCodeMap[offset].EAV;
+			write_dest_byte((char)(code >> 24) & 0xff);
+			write_dest_byte((char)(code >> 16) & 0xff);
+			write_dest_byte((char)(code >> 8) & 0xff);
+			write_dest_byte((char)(code) & 0xff);
+
+			/* Output horizontal blanking */
+			for (i = 0; i < 67 * 2; ++i) {
+				write_dest_byte(0x80);
+				write_dest_byte(0x10);
+			}
+
+			/* Output SAV */
+			code = SystemCodeMap[offset].SAV;
+			write_dest_byte((char)(code >> 24) & 0xff);
+			write_dest_byte((char)(code >> 16) & 0xff);
+			write_dest_byte((char)(code >> 8) & 0xff);
+			write_dest_byte((char)(code) & 0xff);
+
+			/* Output empty horizontal data */
+			for (i = 0; i < 360 * 2; ++i) {
+				write_dest_byte(0x80);
+				write_dest_byte(0x10);
+			}
+		}
+	}
+
+	return dest - base_address;
+}
+
+void fill_frame(char *Frame, int Value)
+{
+	int *OddPtr32;
+	int OddLine;
+	int *EvenPtr32;
+	int EvenLine;
+	int i;
+	int *data;
+	int m, n;
+
+	/* fill odd and even frames */
+	for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) {
+		OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276);
+		EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276);
+		for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) {
+			*OddPtr32 = Value;
+			*EvenPtr32 = Value;
+		}
+	}
+
+	for (m = 0; m < VERTICAL; m++) {
+		data = (int *)u_boot_logo.data;
+		for (OddLine = (22 + m), EvenLine = (285 + m);
+		     OddLine < (u_boot_logo.height * VERTICAL) + (22 + m);
+		     OddLine += VERTICAL, EvenLine += VERTICAL) {
+			OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276);
+			EvenPtr32 =
+			    (int *)((Frame + ((EvenLine) * 1716)) + 276);
+			for (i = 0; i < u_boot_logo.width / 2; i++) {
+				/* enlarge one pixel to m x n */
+				for (n = 0; n < HORIZONTAL; n++) {
+					*OddPtr32++ = *data;
+					*EvenPtr32++ = *data;
+				}
+				data++;
+			}
+		}
+	}
+}
+
+void video_putc(const char c)
+{
+}
+
+void video_puts(const char *s)
+{
+}
+
+static int video_init(void)
+{
+	char *NTSCFrame;
+	NTSCFrame = (char *)NTSC_FRAME_ADDR;
+	NTSC_framebuffer_init(NTSCFrame);
+	fill_frame(NTSCFrame, BLUE);
+
+	*pPPI_CONTROL = 0x0082;
+	*pPPI_FRAME = 0x020D;
+
+	*pDMA0_START_ADDR = NTSCFrame;
+	*pDMA0_X_COUNT = 0x035A;
+	*pDMA0_X_MODIFY = 0x0002;
+	*pDMA0_Y_COUNT = 0x020D;
+	*pDMA0_Y_MODIFY = 0x0002;
+	*pDMA0_CONFIG = 0x1015;
+	*pPPI_CONTROL = 0x0083;
+	return 0;
+}
+
+int drv_video_init(void)
+{
+	int error, devices = 1;
+
+	device_t videodev;
+
+	video_init();		/* Video initialization */
+
+	memset(&videodev, 0, sizeof(videodev));
+
+	strcpy(videodev.name, "video");
+	videodev.ext = DEV_EXT_VIDEO;	/* Video extensions */
+	videodev.flags = DEV_FLAGS_OUTPUT;	/* Output only */
+	videodev.putc = video_putc;	/* 'putc' function */
+	videodev.puts = video_puts;	/* 'puts' function */
+
+	error = device_register(&videodev);
+
+	return (error == 0) ? devices : error;
+}
+#endif

cpu/bf537/video.h

@@ -0,0 +1,25 @@
+#include <video_logo.h>
+#define write_dest_byte(val) {*dest++=val;}
+#define BLACK   (0x01800180)	/* black pixel pattern	*/
+#define BLUE    (0x296E29F0)	/* blue pixel pattern	*/
+#define RED     (0x51F0515A)	/* red pixel pattern	*/
+#define MAGENTA (0x6ADE6ACA)	/* magenta pixel pattern*/
+#define GREEN   (0x91229136)	/* green pixel pattern	*/
+#define CYAN    (0xAA10AAA6)	/* cyan pixel pattern	*/
+#define YELLOW  (0xD292D210)	/* yellow pixel pattern	*/
+#define WHITE   (0xFE80FE80)	/* white pixel pattern	*/
+
+#define true 	1
+#define false	0
+
+typedef struct {
+	unsigned int SAV;
+	unsigned int EAV;
+} SystemCodeType;
+
+const SystemCodeType SystemCodeMap[4] = {
+	{0xFF000080, 0xFF00009D},
+	{0xFF0000AB, 0xFF0000B6},
+	{0xFF0000C7, 0xFF0000DA},
+	{0xFF0000EC, 0xFF0000F1}
+};

cpu/bf561/Makefile

@@ -0,0 +1,52 @@
+# U-boot - Makefile
+#
+# Copyright (c) 2005 blackfin.uclinux.org
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(CPU).a
+
+START	= start.o start1.o interrupt.o cache.o flush.o init_sdram.o
+COBJS	= cpu.o traps.o ints.o serial.o interrupts.o video.o
+
+EXTRA = init_sdram_bootrom_initblock.o
+
+SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+START	:= $(addprefix $(obj),$(START))
+
+all:	$(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

cpu/bf561/cache.S

@@ -0,0 +1,128 @@
+#define ASSEMBLY
+#include <asm/linkage.h>
+#include <config.h>
+#include <asm/blackfin.h>
+
+.text
+.align 2
+ENTRY(_blackfin_icache_flush_range)
+	R2 = -32;
+	R2 = R0 & R2;
+	P0 = R2;
+	P1 = R1;
+	CSYNC;
+	1:
+	IFLUSH[P0++];
+	CC = P0 < P1(iu);
+	IF CC JUMP 1b(bp);
+	IFLUSH[P0];
+	SSYNC;
+	RTS;
+
+ENTRY(_blackfin_dcache_flush_range)
+	R2 = -32;
+	R2 = R0 & R2;
+	P0 = R2;
+	P1 = R1;
+	CSYNC;
+1:
+	FLUSH[P0++];
+	CC = P0 < P1(iu);
+	IF CC JUMP 1b(bp);
+	FLUSH[P0];
+	SSYNC;
+	RTS;
+
+ENTRY(_icache_invalidate)
+ENTRY(_invalidate_entire_icache)
+	[--SP] = (R7:5);
+
+	P0.L = (IMEM_CONTROL & 0xFFFF);
+	P0.H = (IMEM_CONTROL >> 16);
+	R7 =[P0];
+
+	/*
+	 * Clear the IMC bit , All valid bits in the instruction
+	 * cache are set to the invalid state
+	 */
+	BITCLR(R7, IMC_P);
+	CLI R6;
+	/* SSYNC required before invalidating cache. */
+	SSYNC;
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	/* Configures the instruction cache agian */
+	R6 = (IMC | ENICPLB);
+	R7 = R7 | R6;
+
+	CLI R6;
+	SSYNC;
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	(R7:5) =[SP++];
+	RTS;
+
+/*
+ * Invalidate the Entire Data cache by
+ * clearing DMC[1:0] bits
+ */
+ENTRY(_invalidate_entire_dcache)
+ENTRY(_dcache_invalidate)
+	[--SP] = (R7:6);
+
+	P0.L = (DMEM_CONTROL & 0xFFFF);
+	P0.H = (DMEM_CONTROL >> 16);
+	R7 =[P0];
+
+	/*
+	 * Clear the DMC[1:0] bits, All valid bits in the data
+	 * cache are set to the invalid state
+	 */
+	BITCLR(R7, DMC0_P);
+	BITCLR(R7, DMC1_P);
+	CLI R6;
+	SSYNC;
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+	/* Configures the data cache again */
+
+	R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+	R7 = R7 | R6;
+
+	CLI R6;
+	SSYNC;
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	(R7:6) =[SP++];
+	RTS;
+
+ENTRY(_blackfin_dcache_invalidate_range)
+	R2 = -32;
+	R2 = R0 & R2;
+	P0 = R2;
+	P1 = R1;
+	CSYNC;
+1:
+	FLUSHINV[P0++];
+	CC = P0 < P1(iu);
+	IF CC JUMP 1b(bp);
+
+	/*
+	 * If the data crosses a cache line, then we'll be pointing to
+	 * the last cache line, but won't have flushed/invalidated it yet, so do
+	 * one more.
+	 */
+	FLUSHINV[P0];
+	SSYNC;
+	RTS;

cpu/bf561/config.mk

@@ -0,0 +1,27 @@
+# U-boot - config.mk
+#
+# Copyright (c) 2005 blackfin.uclinux.org
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -mcpu=bf561 -ffixed-P5

cpu/bf561/cpu.c

@@ -0,0 +1,220 @@
+/*
+ * U-boot - cpu.c CPU specific functions
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/blackfin.h>
+#include <command.h>
+#include <asm/entry.h>
+#include <asm/cplb.h>
+#include <asm/io.h>
+
+#define CACHE_ON 1
+#define CACHE_OFF 0
+
+extern unsigned int icplb_table[page_descriptor_table_size][2];
+extern unsigned int dcplb_table[page_descriptor_table_size][2];
+
+int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	__asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_ISRAM)
+	    );
+
+	return 0;
+}
+
+/* These functions are just used to satisfy the linker */
+int cpu_init(void)
+{
+	return 0;
+}
+
+int cleanup_before_linux(void)
+{
+	return 0;
+}
+
+void icache_enable(void)
+{
+	unsigned int *I0, *I1;
+	int i, j = 0;
+
+	/* Before enable icache, disable it first */
+	icache_disable();
+	I0 = (unsigned int *)ICPLB_ADDR0;
+	I1 = (unsigned int *)ICPLB_DATA0;
+
+	/* make sure the locked ones go in first */
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (CPLB_LOCK & icplb_table[i][1]) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+			      icplb_table[i][0], icplb_table[i][1]);
+			*I0++ = icplb_table[i][0];
+			*I1++ = icplb_table[i][1];
+			j++;
+		}
+	}
+
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (!(CPLB_LOCK & icplb_table[i][1])) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+			      icplb_table[i][0], icplb_table[i][1]);
+			*I0++ = icplb_table[i][0];
+			*I1++ = icplb_table[i][1];
+			j++;
+			if (j == 16) {
+				break;
+			}
+		}
+	}
+
+	/* Fill the rest with invalid entry */
+	if (j <= 15) {
+		for (; j < 16; j++) {
+			debug("filling %i with 0", j);
+			*I1++ = 0x0;
+		}
+
+	}
+
+	cli();
+	sync();
+	asm(" .align 8; ");
+	*(unsigned int *)IMEM_CONTROL = IMC | ENICPLB;
+	sync();
+	sti();
+}
+
+void icache_disable(void)
+{
+	cli();
+	sync();
+	asm(" .align 8; ");
+	*(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB);
+	sync();
+	sti();
+}
+
+int icache_status(void)
+{
+	unsigned int value;
+	value = *(unsigned int *)IMEM_CONTROL;
+
+	if (value & (IMC | ENICPLB))
+		return CACHE_ON;
+	else
+		return CACHE_OFF;
+}
+
+void dcache_enable(void)
+{
+	unsigned int *I0, *I1;
+	unsigned int temp;
+	int i, j = 0;
+
+	/* Before enable dcache, disable it first */
+	dcache_disable();
+	I0 = (unsigned int *)DCPLB_ADDR0;
+	I1 = (unsigned int *)DCPLB_DATA0;
+
+	/* make sure the locked ones go in first */
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (CPLB_LOCK & dcplb_table[i][1]) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+			      dcplb_table[i][0], dcplb_table[i][1]);
+			*I0++ = dcplb_table[i][0];
+			*I1++ = dcplb_table[i][1];
+			j++;
+		} else {
+			debug("skip   %02i %02i 0x%08x 0x%08x\n", i, j,
+			      dcplb_table[i][0], dcplb_table[i][1]);
+		}
+	}
+
+	for (i = 0; i < page_descriptor_table_size; i++) {
+		if (!(CPLB_LOCK & dcplb_table[i][1])) {
+			debug("adding %02i %02i 0x%08x 0x%08x\n", i, j,
+			      dcplb_table[i][0], dcplb_table[i][1]);
+			*I0++ = dcplb_table[i][0];
+			*I1++ = dcplb_table[i][1];
+			j++;
+			if (j == 16) {
+				break;
+			}
+		}
+	}
+
+	/* Fill the rest with invalid entry */
+	if (j <= 15) {
+		for (; j < 16; j++) {
+			debug("filling %i with 0", j);
+			*I1++ = 0x0;
+		}
+	}
+
+	cli();
+	temp = *(unsigned int *)DMEM_CONTROL;
+	sync();
+	asm(" .align 8; ");
+	*(unsigned int *)DMEM_CONTROL =
+	    ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp;
+	sync();
+	sti();
+}
+
+void dcache_disable(void)
+{
+
+	unsigned int *I0, *I1;
+	int i;
+
+	cli();
+	sync();
+	asm(" .align 8; ");
+	*(unsigned int *)DMEM_CONTROL &=
+	    ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+	sync();
+	sti();
+
+	/* after disable dcache, clear it so we don't confuse the next application */
+	I0 = (unsigned int *)DCPLB_ADDR0;
+	I1 = (unsigned int *)DCPLB_DATA0;
+
+	for (i = 0; i < 16; i++) {
+		*I0++ = 0x0;
+		*I1++ = 0x0;
+	}
+}
+
+int dcache_status(void)
+{
+	unsigned int value;
+	value = *(unsigned int *)DMEM_CONTROL;
+	if (value & (ENDCPLB))
+		return CACHE_ON;
+	else
+		return CACHE_OFF;
+}

cpu/bf561/cpu.h

@@ -0,0 +1,66 @@
+/*
+ *  U-boot - cpu.h
+ *
+ *  Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CPU_H_
+#define _CPU_H_
+
+#include <command.h>
+
+#define INTERNAL_IRQS (32)
+#define NUM_IRQ_NODES 16
+#define DEF_INTERRUPT_FLAGS 1
+#define MAX_TIM_LOAD	0xFFFFFFFF
+
+void blackfin_irq_panic(int reason, struct pt_regs *reg);
+extern void dump(struct pt_regs *regs);
+void display_excp(void);
+asmlinkage void evt_nmi(void);
+asmlinkage void evt_exception(void);
+asmlinkage void trap(void);
+asmlinkage void evt_ivhw(void);
+asmlinkage void evt_rst(void);
+asmlinkage void evt_timer(void);
+asmlinkage void evt_evt7(void);
+asmlinkage void evt_evt8(void);
+asmlinkage void evt_evt9(void);
+asmlinkage void evt_evt10(void);
+asmlinkage void evt_evt11(void);
+asmlinkage void evt_evt12(void);
+asmlinkage void evt_evt13(void);
+asmlinkage void evt_soft_int1(void);
+asmlinkage void evt_system_call(void);
+void blackfin_irq_panic(int reason, struct pt_regs *regs);
+void blackfin_free_irq(unsigned int irq, void *dev_id);
+void call_isr(int irq, struct pt_regs *fp);
+void blackfin_do_irq(int vec, struct pt_regs *fp);
+void blackfin_init_IRQ(void);
+void blackfin_enable_irq(unsigned int irq);
+void blackfin_disable_irq(unsigned int irq);
+extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
+int blackfin_request_irq(unsigned int irq,
+			 void (*handler) (int, void *, struct pt_regs *),
+			 unsigned long flags, const char *devname,
+			 void *dev_id);
+void timer_init(void);
+#endif

cpu/bf561/flush.S

@@ -0,0 +1,402 @@
+/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
+ * Copyright (C) 2004 LG SOft India. All Rights Reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.
+ */
+#define ASSEMBLY
+
+#include <asm/linkage.h>
+#include <asm/cplb.h>
+#include <config.h>
+#include <asm/blackfin.h>
+
+.text
+
+/* This is an external function being called by the user
+ * application through __flush_cache_all. Currently this function
+ * serves the purpose of flushing all the pending writes in
+ * in the instruction cache.
+ */
+
+ENTRY(_flush_instruction_cache)
+	[--SP] = ( R7:6, P5:4 );
+	LINK 12;
+	SP += -12;
+	P5.H = (ICPLB_ADDR0 >> 16);
+	P5.L = (ICPLB_ADDR0 & 0xFFFF);
+	P4.H = (ICPLB_DATA0 >> 16);
+	P4.L = (ICPLB_DATA0 & 0xFFFF);
+	R7 = CPLB_VALID | CPLB_L1_CHBL;
+	R6 = 16;
+inext:	R0 = [P5++];
+	R1 = [P4++];
+	[--SP] =  RETS;
+	CALL _icplb_flush;	/* R0 = page, R1 = data*/
+	RETS = [SP++];
+iskip:	R6 += -1;
+	CC = R6;
+	IF CC JUMP inext;
+	SSYNC;
+	SP += 12;
+	UNLINK;
+	( R7:6, P5:4 ) = [SP++];
+	RTS;
+
+/* This is an internal function to flush all pending
+ * writes in the cache associated with a particular ICPLB.
+ *
+ * R0 -  page's start address
+ * R1 -  CPLB's data field.
+ */
+
+.align 2
+ENTRY(_icplb_flush)
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] = LC0;
+	[--SP] = LT0;
+	[--SP] = LB0;
+	[--SP] = LC1;
+	[--SP] = LT1;
+	[--SP] = LB1;
+
+	/* If it's a 1K or 4K page, then it's quickest to
+	 * just systematically flush all the addresses in
+	 * the page, regardless of whether they're in the
+	 * cache, or dirty. If it's a 1M or 4M page, there
+	 * are too many addresses, and we have to search the
+	 * cache for lines corresponding to the page.
+	 */
+
+	CC = BITTST(R1, 17);	/* 1MB or 4MB */
+	IF !CC JUMP iflush_whole_page;
+
+	/* We're only interested in the page's size, so extract
+	 * this from the CPLB (bits 17:16), and scale to give an
+	 * offset into the page_size and page_prefix tables.
+	 */
+
+	R1 <<= 14;
+	R1 >>= 30;
+	R1 <<= 2;
+
+	/* We can also determine the sub-bank used, because this is
+	 * taken from bits 13:12 of the address.
+	 */
+
+	R3 = ((12<<8)|2);		/* Extraction pattern */
+	nop;				/*Anamoly 05000209*/
+	R4 = EXTRACT(R0, R3.L) (Z);	/* Extract bits*/
+	R3.H = R4.L << 0 ;		/* Save in extraction pattern for later deposit.*/
+
+
+	/* So:
+	 * R0 = Page start
+	 * R1 = Page length (actually, offset into size/prefix tables)
+	 * R3 = sub-bank deposit values
+	 *
+	 * The cache has 2 Ways, and 64 sets, so we iterate through
+	 * the sets, accessing the tag for each Way, for our Bank and
+	 * sub-bank, looking for dirty, valid tags that match our
+	 * address prefix.
+	 */
+
+	P5.L = (ITEST_COMMAND & 0xFFFF);
+	P5.H = (ITEST_COMMAND >> 16);
+	P4.L = (ITEST_DATA0 & 0xFFFF);
+	P4.H = (ITEST_DATA0 >> 16);
+
+	P0.L = page_prefix_table;
+	P0.H = page_prefix_table;
+	P1 = R1;
+	R5 = 0;			/* Set counter*/
+	P0 = P1 + P0;
+	R4 = [P0];		/* This is the address prefix*/
+
+	/* We're reading (bit 1==0) the tag (bit 2==0), and we
+	 * don't care about which double-word, since we're only
+	 * fetching tags, so we only have to set Set, Bank,
+	 * Sub-bank and Way.
+	 */
+
+	P2 = 4;
+	LSETUP (ifs1, ife1) LC1 = P2;
+ifs1:	P0 = 32;		/* iterate over all sets*/
+	LSETUP (ifs0, ife0) LC0 = P0;
+ifs0:	R6 = R5 << 5;		/* Combine set*/
+	R6.H = R3.H << 0 ;	/* and sub-bank*/
+	[P5] = R6;		/* Issue Command*/
+	SSYNC;			/* CSYNC will not work here :(*/
+	R7 = [P4];		/* and read Tag.*/
+	CC = BITTST(R7, 0);	/* Check if valid*/
+	IF !CC JUMP ifskip;	/* and skip if not.*/
+
+	/* Compare against the page address. First, plant bits 13:12
+	 * into the tag, since those aren't part of the returned data.
+	 */
+
+	R7 = DEPOSIT(R7, R3);	/* set 13:12*/
+	R1 = R7 & R4;		/* Mask off lower bits*/
+	CC = R1 == R0;		/* Compare against page start.*/
+	IF !CC JUMP ifskip;	/* Skip it if it doesn't match.*/
+
+	/* Tag address matches against page, so this is an entry
+	 * we must flush.
+	 */
+
+	R7 >>= 10;		/* Mask off the non-address bits*/
+	R7 <<= 10;
+	P3 = R7;
+	IFLUSH [P3];		/* And flush the entry*/
+ifskip:
+ife0:	R5 += 1;		/* Advance to next Set*/
+ife1:	NOP;
+
+ifinished:
+	SSYNC;			/* Ensure the data gets out to mem.*/
+
+	/*Finished. Restore context.*/
+	LB1 = [SP++];
+	LT1 = [SP++];
+	LC1 = [SP++];
+	LB0 = [SP++];
+	LT0 = [SP++];
+	LC0 = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
+
+iflush_whole_page:
+	/* It's a 1K or 4K page, so quicker to just flush the
+	 * entire page.
+	 */
+
+	P1 = 32;		/* For 1K pages*/
+	P2 = P1 << 2;		/* For 4K pages*/
+	P0 = R0;		/* Start of page*/
+	CC = BITTST(R1, 16);	/* Whether 1K or 4K*/
+	IF CC P1 = P2;
+	P1 += -1;		/* Unroll one iteration*/
+	SSYNC;
+	IFLUSH [P0++];		/* because CSYNC can't end loops.*/
+	LSETUP (isall, ieall) LC0 = P1;
+isall:IFLUSH [P0++];
+ieall: NOP;
+	SSYNC;
+	JUMP ifinished;
+
+/* This is an external function being called by the user
+ * application through __flush_cache_all. Currently this function
+ * serves the purpose of flushing all the pending writes in
+ * in the data cache.
+ */
+
+ENTRY(_flush_data_cache)
+	[--SP] = ( R7:6, P5:4 );
+	LINK 12;
+	SP += -12;
+	P5.H = (DCPLB_ADDR0 >> 16);
+	P5.L = (DCPLB_ADDR0 & 0xFFFF);
+	P4.H = (DCPLB_DATA0 >> 16);
+	P4.L = (DCPLB_DATA0 & 0xFFFF);
+	R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z);
+	R6 = 16;
+next:	R0 = [P5++];
+	R1 = [P4++];
+	CC = BITTST(R1, 14);	/* Is it write-through?*/
+	IF CC JUMP skip;	/* If so, ignore it.*/
+	R2 = R1 & R7;		/* Is it a dirty, cached page?*/
+	CC = R2;
+	IF !CC JUMP skip;	/* If not, ignore it.*/
+	[--SP] = RETS;
+	CALL _dcplb_flush;	/* R0 = page, R1 = data*/
+	RETS = [SP++];
+skip:	R6 += -1;
+	CC = R6;
+	IF CC JUMP next;
+	SSYNC;
+	SP += 12;
+	UNLINK;
+	( R7:6, P5:4 ) = [SP++];
+	RTS;
+
+/* This is an internal function to flush all pending
+ * writes in the cache associated with a particular DCPLB.
+ *
+ * R0 -  page's start address
+ * R1 -  CPLB's data field.
+ */
+
+.align 2
+ENTRY(_dcplb_flush)
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] = LC0;
+	[--SP] = LT0;
+	[--SP] = LB0;
+	[--SP] = LC1;
+	[--SP] = LT1;
+	[--SP] = LB1;
+
+	/* If it's a 1K or 4K page, then it's quickest to
+	 * just systematically flush all the addresses in
+	 * the page, regardless of whether they're in the
+	 * cache, or dirty. If it's a 1M or 4M page, there
+	 * are too many addresses, and we have to search the
+	 * cache for lines corresponding to the page.
+	 */
+
+	CC = BITTST(R1, 17);	/* 1MB or 4MB */
+	IF !CC JUMP dflush_whole_page;
+
+	/* We're only interested in the page's size, so extract
+	 * this from the CPLB (bits 17:16), and scale to give an
+	 * offset into the page_size and page_prefix tables.
+	 */
+
+	R1 <<= 14;
+	R1 >>= 30;
+	R1 <<= 2;
+
+	/* The page could be mapped into Bank A or Bank B, depending
+	 * on (a) whether both banks are configured as cache, and
+	 * (b) on whether address bit A[x] is set. x is determined
+	 * by DCBS in DMEM_CONTROL
+	 */
+
+	R2 = 0;			/* Default to Bank A (Bank B would be 1)*/
+
+	P0.L = (DMEM_CONTROL & 0xFFFF);
+	P0.H = (DMEM_CONTROL >> 16);
+
+	R3 = [P0];		/* If Bank B is not enabled as cache*/
+	CC = BITTST(R3, 2);	/* then Bank A is our only option.*/
+	IF CC JUMP bank_chosen;
+
+	R4 = 1<<14;		/* If DCBS==0, use A[14].*/
+	R5 = R4 << 7;		/* If DCBS==1, use A[23];*/
+	CC = BITTST(R3, 4);
+	IF CC R4 = R5;		/* R4 now has either bit 14 or bit 23 set.*/
+	R5 = R0 & R4;		/* Use it to test the Page address*/
+	CC = R5;		/* and if that bit is set, we use Bank B,*/
+	R2 = CC;		/* else we use Bank A.*/
+	R2 <<= 23;		/* The Bank selection's at posn 23.*/
+
+bank_chosen:
+
+	/* We can also determine the sub-bank used, because this is
+	 * taken from bits 13:12 of the address.
+	 */
+
+	R3 = ((12<<8)|2);		/* Extraction pattern */
+	nop;				/*Anamoly 05000209*/
+	R4 = EXTRACT(R0, R3.L) (Z);	/* Extract bits*/
+	/* Save in extraction pattern for later deposit.*/
+	R3.H = R4.L << 0;
+
+	/* So:
+	 * R0 = Page start
+	 * R1 = Page length (actually, offset into size/prefix tables)
+	 * R2 = Bank select mask
+	 * R3 = sub-bank deposit values
+	 *
+	 * The cache has 2 Ways, and 64 sets, so we iterate through
+	 * the sets, accessing the tag for each Way, for our Bank and
+	 * sub-bank, looking for dirty, valid tags that match our
+	 * address prefix.
+	 */
+
+	P5.L = (DTEST_COMMAND & 0xFFFF);
+	P5.H = (DTEST_COMMAND >> 16);
+	P4.L = (DTEST_DATA0 & 0xFFFF);
+	P4.H = (DTEST_DATA0 >> 16);
+
+	P0.L = page_prefix_table;
+	P0.H = page_prefix_table;
+	P1 = R1;
+	R5 = 0;			/* Set counter*/
+	P0 = P1 + P0;
+	R4 = [P0];		/* This is the address prefix*/
+
+
+	/* We're reading (bit 1==0) the tag (bit 2==0), and we
+	 * don't care about which double-word, since we're only
+	 * fetching tags, so we only have to set Set, Bank,
+	 * Sub-bank and Way.
+	 */
+
+	P2 = 2;
+	LSETUP (fs1, fe1) LC1 = P2;
+fs1:	P0 = 64;		/* iterate over all sets*/
+	LSETUP (fs0, fe0) LC0 = P0;
+fs0:	R6 = R5 << 5;		/* Combine set*/
+	R6.H = R3.H << 0 ;	/* and sub-bank*/
+	R6 = R6 | R2;		/* and Bank. Leave Way==0 at first.*/
+	BITSET(R6,14);
+	[P5] = R6;		/* Issue Command*/
+	SSYNC;
+	R7 = [P4];		/* and read Tag.*/
+	CC = BITTST(R7, 0);	/* Check if valid*/
+	IF !CC JUMP fskip;	/* and skip if not.*/
+	CC = BITTST(R7, 1);	/* Check if dirty*/
+	IF !CC JUMP fskip;	/* and skip if not.*/
+
+	/* Compare against the page address. First, plant bits 13:12
+	 * into the tag, since those aren't part of the returned data.
+	 */
+
+	R7 = DEPOSIT(R7, R3);	/* set 13:12*/
+	R1 = R7 & R4;		/* Mask off lower bits*/
+	CC = R1 == R0;		/* Compare against page start.*/
+	IF !CC JUMP fskip;	/* Skip it if it doesn't match.*/
+
+	/* Tag address matches against page, so this is an entry
+	 * we must flush.
+	 */
+
+	R7 >>= 10;		/* Mask off the non-address bits*/
+	R7 <<= 10;
+	P3 = R7;
+	SSYNC;
+	FLUSHINV [P3];		/* And flush the entry*/
+fskip:
+fe0:	R5 += 1;		/* Advance to next Set*/
+fe1:	BITSET(R2, 26);		/* Go to next Way.*/
+
+dfinished:
+	SSYNC;			/* Ensure the data gets out to mem.*/
+
+	/*Finished. Restore context.*/
+	LB1 = [SP++];
+	LT1 = [SP++];
+	LC1 = [SP++];
+	LB0 = [SP++];
+	LT0 = [SP++];
+	LC0 = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
+
+dflush_whole_page:
+
+	/* It's a 1K or 4K page, so quicker to just flush the
+	 * entire page.
+	 */
+
+	P1 = 32;		/* For 1K pages*/
+	P2 = P1 << 2;		/* For 4K pages*/
+	P0 = R0;		/* Start of page*/
+	CC = BITTST(R1, 16);	/* Whether 1K or 4K*/
+	IF CC P1 = P2;
+	P1 += -1;		/* Unroll one iteration*/
+	SSYNC;
+	FLUSHINV [P0++];	/* because CSYNC can't end loops.*/
+	LSETUP (eall, eall) LC0 = P1;
+eall:	FLUSHINV [P0++];
+	SSYNC;
+	JUMP dfinished;
+
+.align 4;
+page_prefix_table:
+.byte4 	0xFFFFFC00;	/* 1K */
+.byte4	0xFFFFF000;	/* 4K */
+.byte4	0xFFF00000;	/* 1M */
+.byte4	0xFFC00000;	/* 4M */
+.page_prefix_table.end:

cpu/bf561/init_sdram.S

@@ -0,0 +1,171 @@
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/mem_init.h>
+.global init_sdram;
+
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV   CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV   CONFIG_CCLK_DIV_not_defined_properly
+#endif
+
+init_sdram:
+	[--SP] = ASTAT;
+	[--SP] = RETS;
+	[--SP] = (R7:0);
+	[--SP] = (P5:0);
+
+	/*
+	 * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable
+	 */
+	p0.h = hi(PLL_LOCKCNT);
+	p0.l = lo(PLL_LOCKCNT);
+	r0 = 0x300(Z);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * Put SDRAM in self-refresh, incase anything is running
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITSET (R0, 24);
+	[P2] = R0;
+	SSYNC;
+
+	/*
+	 *  Set PLL_CTL with the value that we calculate in R0
+	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	 *   - [8]     = BYPASS	   : BYPASS the PLL, run CLKIN into CCLK/SCLK
+	 *   - [7]     = output delay (add 200ps of delay to mem signals)
+	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
+	 *   - [5]     = PDWN	   : 1=All Clocks off
+	 *   - [3]     = STOPCK	   : 1=Core Clock off
+	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
+	 *   - [0]     = DF	   : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+	 *   all other bits set to zero
+	 */
+
+	r0 = CONFIG_VCO_MULT & 63;	/* Load the VCO multiplier */
+	r0 = r0 << 9;			/* Shift it over, */
+	r1 = CONFIG_CLKIN_HALF;		/* Do we need to divide CLKIN by 2? */
+	r0 = r1 | r0;
+	r1 = CONFIG_PLL_BYPASS;		/* Bypass the PLL? */
+	r1 = r1 << 8;			/* Shift it over */
+	r0 = r1 | r0;			/* add them all together */
+
+	p0.h = hi(PLL_CTL);
+	p0.l = lo(PLL_CTL);		/* Load the address */
+	cli r2;				/* Disable interrupts */
+	ssync;
+	w[p0] = r0.l;			/* Set the value */
+	idle;				/* Wait for the PLL to stablize */
+	sti r2;				/* Enable interrupts */
+
+check_again:
+	p0.h = hi(PLL_STAT);
+	p0.l = lo(PLL_STAT);
+	R0 = W[P0](Z);
+	CC = BITTST(R0,5);
+	if ! CC jump check_again;
+
+	/* Configure SCLK & CCLK Dividers */
+	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+	p0.h = hi(PLL_DIV);
+	p0.l = lo(PLL_DIV);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * We now are running at speed, time to set the Async mem bank wait states
+	 * This will speed up execution, since we are normally running from FLASH.
+	 */
+
+	p2.h = (EBIU_AMBCTL1 >> 16);
+	p2.l = (EBIU_AMBCTL1 & 0xFFFF);
+	r0.h = (AMBCTL1VAL >> 16);
+	r0.l = (AMBCTL1VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMBCTL0 >> 16);
+	p2.l = (EBIU_AMBCTL0 & 0xFFFF);
+	r0.h = (AMBCTL0VAL >> 16);
+	r0.l = (AMBCTL0VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMGCTL >> 16);
+	p2.l = (EBIU_AMGCTL & 0xffff);
+	r0 = AMGCTLVAL;
+	w[p2] = r0;
+	ssync;
+
+	/*
+	 * Now, Initialize the SDRAM,
+	 * start with the SDRAM Refresh Rate Control Register
+	 */
+	p0.l = lo(EBIU_SDRRC);
+	p0.h = hi(EBIU_SDRRC);
+	r0 = mem_SDRRC;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Memory Bank Control Register - bank specific parameters
+	 */
+	p0.l = (EBIU_SDBCTL & 0xFFFF);
+	p0.h = (EBIU_SDBCTL >> 16);
+	r0 = mem_SDBCTL;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Global Control Register - global programmable parameters
+	 * Disable self-refresh
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITCLR (R0, 24);
+
+	/*
+	 * Check if SDRAM is already powered up, if it is, enable self-refresh
+	 */
+	p0.h = hi(EBIU_SDSTAT);
+	p0.l = lo(EBIU_SDSTAT);
+	r2.l = w[p0];
+	cc = bittst(r2,3);
+	if !cc jump skip;
+	NOP;
+	BITSET (R0, 23);
+skip:
+	[P2] = R0;
+	SSYNC;
+
+	/* Write in the new value in the register */
+	R0.L = lo(mem_SDGCTL);
+	R0.H = hi(mem_SDGCTL);
+	[P2] = R0;
+	SSYNC;
+	nop;
+
+	(P5:0) = [SP++];
+	(R7:0) = [SP++];
+	RETS   = [SP++];
+	ASTAT  = [SP++];
+	RTS;

cpu/bf561/init_sdram_bootrom_initblock.S

@@ -0,0 +1,185 @@
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/mem_init.h>
+.global init_sdram;
+
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV	CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV	CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV	CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV	CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV	CONFIG_CCLK_DIV_not_defined_properly
+#endif
+
+init_sdram:
+	[--SP] = ASTAT;
+	[--SP] = RETS;
+	[--SP] = (R7:0);
+	[--SP] = (P5:0);
+
+
+	p0.h = hi(SICA_IWR0);
+	p0.l = lo(SICA_IWR0);
+	r0.l = 0x1;
+	w[p0] = r0.l;
+	SSYNC;
+
+	p0.h = hi(SPI_BAUD);
+	p0.l = lo(SPI_BAUD);
+	r0.l = CONFIG_SPI_BAUD_INITBLOCK;
+	w[p0] = r0.l;
+	SSYNC;
+
+	/*
+	 * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable
+	 */
+	p0.h = hi(PLL_LOCKCNT);
+	p0.l = lo(PLL_LOCKCNT);
+	r0 = 0x300(Z);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * Put SDRAM in self-refresh, incase anything is running
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITSET (R0, 24);
+	[P2] = R0;
+	SSYNC;
+
+	/*
+	 *  Set PLL_CTL with the value that we calculate in R0
+	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
+	 *   - [7]     = output delay (add 200ps of delay to mem signals)
+	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
+	 *   - [5]     = PDWN	   : 1=All Clocks off
+	 *   - [3]     = STOPCK	   : 1=Core Clock off
+	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
+	 *   - [0]     = DF	   : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+	 *   all other bits set to zero
+	 */
+
+	r0 = CONFIG_VCO_MULT & 63;	/* Load the VCO multiplier */
+	r0 = r0 << 9;			/* Shift it over, */
+	r1 = CONFIG_CLKIN_HALF;		/* Do we need to divide CLKIN by 2? */
+	r0 = r1 | r0;
+	r1 = CONFIG_PLL_BYPASS;		/* Bypass the PLL? */
+	r1 = r1 << 8;			/* Shift it over */
+	r0 = r1 | r0;			/* add them all together */
+
+	p0.h = hi(PLL_CTL);
+	p0.l = lo(PLL_CTL);		/* Load the address */
+	cli r2;				/* Disable interrupts */
+	ssync;
+	w[p0] = r0.l;			/* Set the value */
+	idle;				/* Wait for the PLL to stablize */
+	sti r2;				/* Enable interrupts */
+
+check_again:
+	p0.h = hi(PLL_STAT);
+	p0.l = lo(PLL_STAT);
+	R0 = W[P0](Z);
+	CC = BITTST(R0,5);
+	if ! CC jump check_again;
+
+	/* Configure SCLK & CCLK Dividers */
+	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+	p0.h = hi(PLL_DIV);
+	p0.l = lo(PLL_DIV);
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * We now are running at speed, time to set the Async mem bank wait states
+	 * This will speed up execution, since we are normally running from FLASH.
+	 */
+
+	p2.h = (EBIU_AMBCTL1 >> 16);
+	p2.l = (EBIU_AMBCTL1 & 0xFFFF);
+	r0.h = (AMBCTL1VAL >> 16);
+	r0.l = (AMBCTL1VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMBCTL0 >> 16);
+	p2.l = (EBIU_AMBCTL0 & 0xFFFF);
+	r0.h = (AMBCTL0VAL >> 16);
+	r0.l = (AMBCTL0VAL & 0xFFFF);
+	[p2] = r0;
+	ssync;
+
+	p2.h = (EBIU_AMGCTL >> 16);
+	p2.l = (EBIU_AMGCTL & 0xffff);
+	r0 = AMGCTLVAL;
+	w[p2] = r0;
+	ssync;
+
+	/*
+	 * Now, Initialize the SDRAM,
+	 * start with the SDRAM Refresh Rate Control Register
+	 */
+	p0.l = lo(EBIU_SDRRC);
+	p0.h = hi(EBIU_SDRRC);
+	r0 = mem_SDRRC;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Memory Bank Control Register - bank specific parameters
+	 */
+	p0.l = (EBIU_SDBCTL & 0xFFFF);
+	p0.h = (EBIU_SDBCTL >> 16);
+	r0 = mem_SDBCTL;
+	w[p0] = r0.l;
+	ssync;
+
+	/*
+	 * SDRAM Global Control Register - global programmable parameters
+	 * Disable self-refresh
+	 */
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITCLR (R0, 24);
+
+	/*
+	 * Check if SDRAM is already powered up, if it is, enable self-refresh
+	 */
+	p0.h = hi(EBIU_SDSTAT);
+	p0.l = lo(EBIU_SDSTAT);
+	r2.l = w[p0];
+	cc = bittst(r2,3);
+	if !cc jump skip;
+	NOP;
+	BITSET (R0, 23);
+skip:
+	[P2] = R0;
+	SSYNC;
+
+	/* Write in the new value in the register */
+	R0.L = lo(mem_SDGCTL);
+	R0.H = hi(mem_SDGCTL);
+	[P2] = R0;
+	SSYNC;
+	nop;
+
+
+	(P5:0) = [SP++];
+	(R7:0) = [SP++];
+	RETS   = [SP++];
+	ASTAT  = [SP++];
+	RTS;

cpu/bf561/interrupt.S

@@ -0,0 +1,246 @@
+/*
+ * U-boot - interrupt.S Processing of interrupts and exception handling
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on interrupt.S
+ *
+ * Copyright (C) 2003	Metrowerks, Inc. <mwaddel@metrowerks.com>
+ * Copyright (C) 2002	Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca>
+ * Copyright (C) 1998	D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
+ *			Kenneth Albanowski <kjahds@kjahds.com>,
+ *			The Silver Hammer Group, Ltd.
+ *
+ * (c) 1995, Dionne & Associates
+ * (c) 1995, DKG Display Tech.
+ *
+ * This file is also based on exception.asm
+ * (C) Copyright 2001-2005 - Analog Devices, Inc.  All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define ASSEMBLY
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/hw_irq.h>
+#include <asm/entry.h>
+#include <asm/blackfin_defs.h>
+
+.global _blackfin_irq_panic;
+
+.text
+.align 2
+
+#ifndef CONFIG_KGDB
+.global _evt_emulation
+_evt_emulation:
+	SAVE_CONTEXT
+	r0 = IRQ_EMU;
+	r1 = seqstat;
+	sp += -12;
+	call _blackfin_irq_panic;
+	sp += 12;
+	rte;
+#endif
+
+.global _evt_nmi
+_evt_nmi:
+	SAVE_CONTEXT
+	r0 = IRQ_NMI;
+	r1 = RETN;
+	sp += -12;
+	call _blackfin_irq_panic;
+	sp += 12;
+
+_evt_nmi_exit:
+	rtn;
+
+.global _trap
+_trap:
+	SAVE_ALL_SYS
+	r0 = sp;	/* stack frame pt_regs pointer argument ==> r0 */
+	sp += -12;
+	call _trap_c
+	sp += 12;
+	RESTORE_ALL_SYS
+	rtx;
+
+.global _evt_rst
+_evt_rst:
+	SAVE_CONTEXT
+	r0 = IRQ_RST;
+	r1 = RETN;
+	sp += -12;
+	call _do_reset;
+	sp += 12;
+
+_evt_rst_exit:
+	rtn;
+
+irq_panic:
+	r0 = IRQ_EVX;
+	r1 =  sp;
+	sp += -12;
+	call _blackfin_irq_panic;
+	sp += 12;
+
+.global _evt_ivhw
+_evt_ivhw:
+	SAVE_CONTEXT
+	RAISE 14;
+
+_evt_ivhw_exit:
+	 rti;
+
+.global _evt_timer
+_evt_timer:
+	SAVE_CONTEXT
+	r0 = IRQ_CORETMR;
+	sp += -12;
+	/* Polling method used now. */
+	/* call timer_int; */
+	sp += 12;
+	RESTORE_CONTEXT
+	rti;
+	nop;
+
+.global _evt_evt7
+_evt_evt7:
+	SAVE_CONTEXT
+	r0 = 7;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt7_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt8
+_evt_evt8:
+	SAVE_CONTEXT
+	r0 = 8;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt8_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt9
+_evt_evt9:
+	SAVE_CONTEXT
+	r0 = 9;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt9_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt10
+_evt_evt10:
+	SAVE_CONTEXT
+	r0 = 10;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt10_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt11
+_evt_evt11:
+	SAVE_CONTEXT
+	r0 = 11;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt11_exit:
+	RESTORE_CONTEXT
+	rti;
+
+.global _evt_evt12
+_evt_evt12:
+	SAVE_CONTEXT
+	r0 = 12;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+evt_evt12_exit:
+	 RESTORE_CONTEXT
+	 rti;
+
+.global _evt_evt13
+_evt_evt13:
+	SAVE_CONTEXT
+	r0 = 13;
+	sp += -12;
+	call _process_int;
+	sp += 12;
+
+evt_evt13_exit:
+	 RESTORE_CONTEXT
+	 rti;
+
+.global _evt_system_call
+_evt_system_call:
+	[--sp] = r0;
+	[--SP] = RETI;
+	r0 = [sp++];
+	r0 += 2;
+	[--sp] = r0;
+	RETI = [SP++];
+	r0 = [SP++];
+	SAVE_CONTEXT
+	sp += -12;
+	call _exception_handle;
+	sp += 12;
+	RESTORE_CONTEXT
+	RTI;
+
+evt_system_call_exit:
+	rti;
+
+.global _evt_soft_int1
+_evt_soft_int1:
+	[--sp] = r0;
+	[--SP] = RETI;
+	r0 = [sp++];
+	r0 += 2;
+	[--sp] = r0;
+	RETI = [SP++];
+	r0 = [SP++];
+	SAVE_CONTEXT
+	sp += -12;
+	call _exception_handle;
+	sp += 12;
+	RESTORE_CONTEXT
+	RTI;
+
+evt_soft_int1_exit:
+	rti;

cpu/bf561/interrupts.c

@@ -0,0 +1,171 @@
+/*
+ * U-boot - interrupts.c Interrupt related routines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on interrupts.c
+ * Copyright 1996 Roman Zippel
+ * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * Copyright 2003 Metrowerks/Motorola
+ * Copyright 2003 Bas Vermeulen <bas@buyways.nl>,
+ *			BuyWays B.V. (www.buyways.nl)
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include "cpu.h"
+
+static ulong timestamp;
+static ulong last_time;
+static int int_flag;
+
+int irq_flags;			/* needed by asm-blackfin/system.h */
+
+/* Functions just to satisfy the linker */
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On BF561 it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On BF561 it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	ulong tbclk;
+
+	tbclk = CFG_HZ;
+	return tbclk;
+}
+
+void enable_interrupts(void)
+{
+	restore_flags(int_flag);
+}
+
+int disable_interrupts(void)
+{
+	save_and_cli(int_flag);
+	return 1;
+}
+
+int interrupt_init(void)
+{
+	return (0);
+}
+
+void udelay(unsigned long usec)
+{
+	unsigned long delay, start, stop;
+	unsigned long cclk;
+	cclk = (CONFIG_CCLK_HZ);
+
+	while (usec > 1) {
+		/*
+		 * how many clock ticks to delay?
+		 *  - request(in useconds) * clock_ticks(Hz) / useconds/second
+		 */
+		if (usec < 1000) {
+			delay = (usec * (cclk / 244)) >> 12;
+			usec = 0;
+		} else {
+			delay = (1000 * (cclk / 244)) >> 12;
+			usec -= 1000;
+		}
+
+		asm volatile (" %0 = CYCLES;":"=r" (start));
+		do {
+			asm volatile (" %0 = CYCLES; ":"=r" (stop));
+		} while (stop - start < delay);
+	}
+
+	return;
+}
+
+void timer_init(void)
+{
+	*pTCNTL = 0x1;
+	*pTSCALE = 0x0;
+	*pTCOUNT = MAX_TIM_LOAD;
+	*pTPERIOD = MAX_TIM_LOAD;
+	*pTCNTL = 0x7;
+	asm("CSYNC;");
+
+	timestamp = 0;
+	last_time = 0;
+}
+
+/*
+ * Any network command or flash
+ * command is started get_timer shall
+ * be called before TCOUNT gets reset,
+ * to implement the accurate timeouts.
+ *
+ * How ever milliconds doesn't return
+ * the number that has been elapsed from
+ * the last reset.
+ *
+ * As get_timer is used in the u-boot
+ * only for timeouts this should be
+ * sufficient
+ */
+ulong get_timer(ulong base)
+{
+	ulong milisec;
+
+	/* Number of clocks elapsed */
+	ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT));
+
+	/*
+	 * Find if the TCOUNT is reset
+	 * timestamp gives the number of times
+	 * TCOUNT got reset
+	 */
+	if (clocks < last_time)
+		timestamp++;
+	last_time = clocks;
+
+	/* Get the number of milliseconds */
+	milisec = clocks / (CONFIG_CCLK_HZ / 1000);
+
+	/*
+	 * Find the number of millisonds
+	 * that got elapsed before this TCOUNT
+	 * cycle
+	 */
+	milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000));
+
+	return (milisec - base);
+}

cpu/bf561/ints.c

@@ -0,0 +1,117 @@
+/*
+ * U-boot - ints.c Interrupt related routines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on ints.c
+ *
+ * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin
+ *	drivers
+ *
+ * Copyright 1996 Roman Zippel
+ * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * Copyright 2003 Metrowerks/Motorola
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/stddef.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/traps.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+#include <asm/blackfin.h>
+#include "cpu.h"
+
+void blackfin_irq_panic(int reason, struct pt_regs *regs)
+{
+	printf("\n\nException: IRQ 0x%x entered\n", reason);
+	printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f));
+	printf("stack frame=0x%x, ", (unsigned int)regs);
+	printf("bad PC=0x%04x\n", (unsigned int)regs->pc);
+	dump(regs);
+	printf("Unhandled IRQ or exceptions!\n");
+	printf("Please reset the board \n");
+}
+
+void blackfin_init_IRQ(void)
+{
+	*(unsigned volatile long *)(SIC_IMASK) = SIC_UNMASK_ALL;
+	cli();
+#ifndef CONFIG_KGDB
+	*(unsigned volatile long *)(EVT_EMULATION_ADDR) = 0x0;
+#endif
+	*(unsigned volatile long *)(EVT_NMI_ADDR) =
+	    (unsigned volatile long)evt_nmi;
+	*(unsigned volatile long *)(EVT_EXCEPTION_ADDR) =
+	    (unsigned volatile long)trap;
+	*(unsigned volatile long *)(EVT_HARDWARE_ERROR_ADDR) =
+	    (unsigned volatile long)evt_ivhw;
+	*(unsigned volatile long *)(EVT_RESET_ADDR) =
+	    (unsigned volatile long)evt_rst;
+	*(unsigned volatile long *)(EVT_TIMER_ADDR) =
+	    (unsigned volatile long)evt_timer;
+	*(unsigned volatile long *)(EVT_IVG7_ADDR) =
+	    (unsigned volatile long)evt_evt7;
+	*(unsigned volatile long *)(EVT_IVG8_ADDR) =
+	    (unsigned volatile long)evt_evt8;
+	*(unsigned volatile long *)(EVT_IVG9_ADDR) =
+	    (unsigned volatile long)evt_evt9;
+	*(unsigned volatile long *)(EVT_IVG10_ADDR) =
+	    (unsigned volatile long)evt_evt10;
+	*(unsigned volatile long *)(EVT_IVG11_ADDR) =
+	    (unsigned volatile long)evt_evt11;
+	*(unsigned volatile long *)(EVT_IVG12_ADDR) =
+	    (unsigned volatile long)evt_evt12;
+	*(unsigned volatile long *)(EVT_IVG13_ADDR) =
+	    (unsigned volatile long)evt_evt13;
+	*(unsigned volatile long *)(EVT_IVG14_ADDR) =
+	    (unsigned volatile long)evt_system_call;
+	*(unsigned volatile long *)(EVT_IVG15_ADDR) =
+	    (unsigned volatile long)evt_soft_int1;
+	*(volatile unsigned long *)ILAT = 0;
+	asm("csync;");
+	sti();
+	*(volatile unsigned long *)IMASK = 0xffbf;
+	asm("csync;");
+}
+
+void exception_handle(void)
+{
+#if defined (CONFIG_PANIC_HANG)
+	display_excp();
+#else
+	udelay(100000);		/* allow messages to go out */
+	do_reset(NULL, 0, 0, NULL);
+#endif
+}
+
+void display_excp(void)
+{
+	printf("Exception!\n");
+}

cpu/bf561/serial.c

@@ -0,0 +1,196 @@
+/*
+ * U-boot - serial.c Serial driver for BF561
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on
+ * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART.
+ * Copyright (c) 2003	Bas Vermeulen <bas@buyways.nl>,
+ * 			BuyWays B.V. (www.buyways.nl)
+ *
+ * Based heavily on blkfinserial.c
+ * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs.
+ * Copyright(c) 2003	Metrowerks	<mwaddel@metrowerks.com>
+ * Copyright(c)	2001	Tony Z. Kou	<tonyko@arcturusnetworks.com>
+ * Copyright(c)	2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com>
+ *
+ * Based on code from 68328 version serial driver imlpementation which was:
+ * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
+ * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/segment.h>
+#include <asm/bitops.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+#include "serial.h"
+#include <asm/io.h>
+
+unsigned long pll_div_fact;
+
+void calc_baud(void)
+{
+	unsigned char i;
+	int temp;
+	u_long sclk = get_sclk();
+
+	for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) {
+		temp = sclk / (baud_table[i] * 8);
+		if ((temp & 0x1) == 1) {
+			temp++;
+		}
+		temp = temp / 2;
+		hw_baud_table[i].dl_high = (temp >> 8) & 0xFF;
+		hw_baud_table[i].dl_low = (temp) & 0xFF;
+	}
+}
+
+void serial_setbrg(void)
+{
+	int i;
+	DECLARE_GLOBAL_DATA_PTR;
+
+	calc_baud();
+
+	for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) {
+		if (gd->baudrate == baud_table[i])
+			break;
+	}
+
+	/* Enable UART */
+	*pUART_GCTL |= UART_GCTL_UCEN;
+	sync();
+
+	/* Set DLAB in LCR to Access DLL and DLH */
+	ACCESS_LATCH;
+	sync();
+
+	*pUART_DLL = hw_baud_table[i].dl_low;
+	sync();
+	*pUART_DLH = hw_baud_table[i].dl_high;
+	sync();
+
+	/* Clear DLAB in LCR to Access THR RBR IER */
+	ACCESS_PORT_IER;
+	sync();
+
+	/*
+	 * Enable  ERBFI and ELSI interrupts
+	 * to poll SIC_ISR register
+	 */
+	*pUART_IER = UART_IER_ELSI | UART_IER_ERBFI | UART_IER_ETBEI;
+	sync();
+
+	/* Set LCR to Word Lengh 8-bit word select */
+	*pUART_LCR = UART_LCR_WLS8;
+	sync();
+
+	return;
+}
+
+int serial_init(void)
+{
+	serial_setbrg();
+	return (0);
+}
+
+void serial_putc(const char c)
+{
+	if ((*pUART_LSR) & UART_LSR_TEMT) {
+		if (c == '\n')
+			serial_putc('\r');
+
+		local_put_char(c);
+	}
+
+	while (!((*pUART_LSR) & UART_LSR_TEMT))
+		SYNC_ALL;
+
+	return;
+}
+
+int serial_tstc(void)
+{
+	if (*pUART_LSR & UART_LSR_DR)
+		return 1;
+	else
+		return 0;
+}
+
+int serial_getc(void)
+{
+	unsigned short uart_lsr_val, uart_rbr_val;
+	unsigned long isr_val;
+	int ret;
+
+	/* Poll for RX Interrupt */
+	while (!((isr_val =
+		  *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT)) ;
+	asm("csync;");
+
+	uart_lsr_val = *pUART_LSR;	/* Clear status bit */
+	uart_rbr_val = *pUART_RBR;	/* getc() */
+
+	if (isr_val & IRQ_UART_ERROR_BIT) {
+		ret = -1;
+	} else {
+		ret = uart_rbr_val & 0xff;
+	}
+
+	return ret;
+}
+
+void serial_puts(const char *s)
+{
+	while (*s) {
+		serial_putc(*s++);
+	}
+}
+
+static void local_put_char(char ch)
+{
+	int flags = 0;
+	unsigned long isr_val;
+
+	save_and_cli(flags);
+
+	/* Poll for TX Interruput */
+	while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT)) ;
+	asm("csync;");
+
+	*pUART_THR = ch;	/* putc() */
+
+	if (isr_val & IRQ_UART_ERROR_BIT) {
+		printf("?");
+	}
+
+	restore_flags(flags);
+
+	return;
+}

cpu/bf561/serial.h

@@ -0,0 +1,77 @@
+/*
+ * U-boot - bf561_serial.h Serial Driver defines
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on
+ * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
+ * Copyright (C) 2003	Bas Vermeulen <bas@buyways.nl>
+ * 			BuyWays B.V. (www.buyways.nl)
+ *
+ * Based heavily on:
+ * blkfinserial.h: Definitions for the BlackFin DSP serial driver.
+ *
+ * Copyright (C) 2001	Tony Z. Kou	tonyko@arcturusnetworks.com
+ * Copyright (C) 2001   Arcturus Networks Inc. <www.arcturusnetworks.com>
+ *
+ * Based on code from 68328serial.c which was:
+ * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
+ * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _Bf561_SERIAL_H
+#define _Bf561_SERIAL_H
+
+#include <linux/config.h>
+#include <asm/blackfin.h>
+
+#define SYNC_ALL	__asm__ __volatile__ ("ssync;\n")
+#define ACCESS_LATCH	*pUART_LCR |= UART_LCR_DLAB;
+#define ACCESS_PORT_IER	*pUART_LCR &= (~UART_LCR_DLAB);
+
+void serial_setbrg(void);
+static void local_put_char(char ch);
+void calc_baud(void);
+void serial_setbrg(void);
+int serial_init(void);
+void serial_putc(const char c);
+int serial_tstc(void);
+int serial_getc(void);
+void serial_puts(const char *s);
+static void local_put_char(char ch);
+
+int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 };
+
+struct {
+	unsigned char dl_high;
+	unsigned char dl_low;
+} hw_baud_table[5];
+
+#ifdef CONFIG_STAMP
+extern unsigned long pll_div_fact;
+#endif
+
+#endif

cpu/bf561/start.S

@@ -0,0 +1,311 @@
+/*
+ * U-boot - start.S Startup file of u-boot for BF533/BF561
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on head.S
+ * Copyright (c) 2003  Metrowerks/Motorola
+ * Copyright (C) 1998  D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
+ *		       Kenneth Albanowski <kjahds@kjahds.com>,
+ *		       The Silver Hammer Group, Ltd.
+ * (c) 1995, Dionne & Associates
+ * (c) 1995, DKG Display Tech.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Note: A change in this file subsequently requires a change in
+ *       board/$(board_name)/config.mk for a valid u-boot.bin
+ */
+
+#define ASSEMBLY
+
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
+
+.global _stext;
+.global __bss_start;
+.global start;
+.global _start;
+.global _rambase;
+.global _ramstart;
+.global _ramend;
+.global edata;
+.global _initialize;
+.global _exit;
+.global flashdataend;
+.global init_sdram;
+
+.text
+_start:
+start:
+_stext:
+
+	R0 = 0x32;
+	SYSCFG = R0;
+	SSYNC;
+
+	/*
+	 * As per HW reference manual DAG registers,
+	 * DATA and Address resgister shall be zero'd
+	 * in initialization, after a reset state
+	 */
+	r1 = 0;	/* Data registers zero'd */
+	r2 = 0;
+	r3 = 0;
+	r4 = 0;
+	r5 = 0;
+	r6 = 0;
+	r7 = 0;
+
+	p0 = 0; /* Address registers zero'd */
+	p1 = 0;
+	p2 = 0;
+	p3 = 0;
+	p4 = 0;
+	p5 = 0;
+
+	i0 = 0; /* DAG Registers zero'd */
+	i1 = 0;
+	i2 = 0;
+	i3 = 0;
+	m0 = 0;
+	m1 = 0;
+	m3 = 0;
+	m3 = 0;
+	l0 = 0;
+	l1 = 0;
+	l2 = 0;
+	l3 = 0;
+	b0 = 0;
+	b1 = 0;
+	b2 = 0;
+	b3 = 0;
+
+	/*
+	 * Set loop counters to zero, to make sure that
+	 * hw loops are disabled.
+	 */
+	r0  = 0;
+	lc0 = r0;
+	lc1 = r0;
+
+	SSYNC;
+
+	/* Check soft reset status */
+	p0.h = SWRST >> 16;
+	p0.l = SWRST & 0xFFFF;
+	r0.l = w[p0];
+
+	cc = bittst(r0, 15);
+	if !cc jump no_soft_reset;
+
+	/* Clear Soft reset */
+	r0 = 0x0000;
+	w[p0] = r0;
+	ssync;
+
+no_soft_reset:
+	nop;
+
+	/* Clear EVT registers */
+	p0.h = (EVT_EMULATION_ADDR >> 16);
+	p0.l = (EVT_EMULATION_ADDR & 0xFFFF);
+	p0 += 8;
+	p1 = 14;
+	r1 = 0;
+	LSETUP(4,4) lc0 = p1;
+	[ p0 ++ ] = r1;
+
+	p0.h = hi(SIC_IWR);
+	p0.l = lo(SIC_IWR);
+	r0.l = 0x1;
+	w[p0] = r0.l;
+	SSYNC;
+
+	sp.l = (0xffb01000 & 0xFFFF);
+	sp.h = (0xffb01000 >> 16);
+
+	/*
+	 * Check if the code is in SDRAM
+	 * If the code is in SDRAM, skip SDRAM initializaiton
+	 */
+	call get_pc;
+	r3.l = 0x0;
+	r3.h = 0x2000;
+	cc = r0 < r3 (iu);
+	if cc jump sdram_initialized;
+	call init_sdram;
+	/* relocate into to RAM */
+sdram_initialized:
+	call get_pc;
+offset:
+	r2.l = offset;
+	r2.h = offset;
+	r3.l = start;
+	r3.h = start;
+	r1 = r2 - r3;
+
+	r0 = r0 - r1;
+	p1 = r0;
+
+	p2.l = (CFG_MONITOR_BASE & 0xffff);
+	p2.h = (CFG_MONITOR_BASE >> 16);
+
+	p3 = 0x04;
+	p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff);
+	p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16);
+loop1:
+	r1 = [p1 ++ p3];
+	[p2 ++ p3] = r1;
+	cc=p2==p4;
+	if !cc jump loop1;
+	/*
+	 * configure STACK
+	 */
+	r0.h = (CONFIG_STACKBASE >> 16);
+	r0.l = (CONFIG_STACKBASE & 0xFFFF);
+	sp = r0;
+	fp = sp;
+
+	/*
+	 * This next section keeps the processor in supervisor mode
+	 * during kernel boot.  Switches to user mode at end of boot.
+	 * See page 3-9 of Hardware Reference manual for documentation.
+	 */
+
+	/* To keep ourselves in the supervisor mode */
+	p0.l = (EVT_IVG15_ADDR & 0xFFFF);
+	p0.h = (EVT_IVG15_ADDR >> 16);
+
+	p1.l = _real_start;
+	p1.h = _real_start;
+	[p0] = p1;
+
+	p0.l = (IMASK & 0xFFFF);
+	p0.h = (IMASK >> 16);
+	r0.l = LO(IVG15_POS);
+	r0.h = HI(IVG15_POS);
+	[p0] = r0;
+	raise 15;
+	p0.l = WAIT_HERE;
+	p0.h = WAIT_HERE;
+	reti = p0;
+	rti;
+
+WAIT_HERE:
+	jump WAIT_HERE;
+
+.global _real_start;
+_real_start:
+	[ -- sp ] = reti;
+
+#ifdef CONFIG_EZKIT561
+	p0.l = (WDOG_CTL & 0xFFFF);
+	p0.h = (WDOG_CTL >> 16);
+	r0 = WATCHDOG_DISABLE(z);
+	w[p0] = r0;
+#endif
+
+	/* DMA reset code to Hi of L1 SRAM */
+copy:
+	P1.H = hi(SYSMMR_BASE);	/* P1 Points to the beginning of SYSTEM MMR Space */
+	P1.L = lo(SYSMMR_BASE);
+
+	R0.H = reset_start;	/* Source Address (high) */
+	R0.L = reset_start;	/* Source Address (low) */
+	R1.H = reset_end;
+	R1.L = reset_end;
+	R2 = R1 - R0;		/* Count */
+	R1.H = hi(L1_ISRAM);	/* Destination Address (high) */
+	R1.L = lo(L1_ISRAM);	/* Destination Address (low) */
+	R3.L = DMAEN;		/* Source DMAConfig Value (8-bit words) */
+	R4.L = (DI_EN | WNR | DMAEN);	/* Destination DMAConfig Value (8-bit words) */
+
+DMA:
+	R6 = 0x1 (Z);
+	W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6;	/* Source Modify = 1 */
+	W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6;	/* Destination Modify = 1 */
+
+	[P1+OFFSET_(MDMA_S0_START_ADDR)] = R0;	/* Set Source Base Address */
+	W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2;	/* Set Source Count */
+	/* Set Source  DMAConfig = DMA Enable,
+	Memory Read,  8-Bit Transfers, 1-D DMA, Flow - Stop */
+	W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3;
+
+	[P1+OFFSET_(MDMA_D0_START_ADDR)] = R1;	/* Set Destination Base Address */
+	W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2;	/* Set Destination Count */
+	/* Set Destination DMAConfig = DMA Enable,
+	Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
+	W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4;
+
+WAIT_DMA_DONE:
+	p0.h = hi(MDMA_D0_IRQ_STATUS);
+	p0.l = lo(MDMA_D0_IRQ_STATUS);
+	R0 = W[P0](Z);
+	CC = BITTST(R0, 0);
+	if ! CC jump WAIT_DMA_DONE
+
+	R0 = 0x1;
+	W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0;	/* Write 1 to clear DMA interrupt */
+
+	/* Initialize BSS Section with 0 s */
+	p1.l = __bss_start;
+	p1.h = __bss_start;
+	p2.l = _end;
+	p2.h = _end;
+	r1 = p1;
+	r2 = p2;
+	r3 = r2 - r1;
+	r3 = r3 >> 2;
+	p3 = r3;
+	lsetup (_clear_bss, _clear_bss_end ) lc1 = p3;
+	CC = p2<=p1;
+	if CC jump _clear_bss_skip;
+	r0 = 0;
+_clear_bss:
+_clear_bss_end:
+	[p1++] = r0;
+_clear_bss_skip:
+
+	p0.l = _start1;
+	p0.h = _start1;
+	jump (p0);
+
+reset_start:
+	p0.h = WDOG_CNT >> 16;
+	p0.l = WDOG_CNT & 0xffff;
+	r0 = 0x0010;
+	w[p0] = r0;
+	p0.h = WDOG_CTL >> 16;
+	p0.l = WDOG_CTL & 0xffff;
+	r0 = 0x0000;
+	w[p0] = r0;
+reset_wait:
+	jump reset_wait;
+
+reset_end: nop;
+
+_exit:
+	jump.s	_exit;
+get_pc:
+	r0 = rets;
+	rts;

cpu/bf561/start1.S

@@ -1,6 +1,7 @@
 /*
- * (C) Copyright 2004
+ * U-boot - start1.S Code running out of RAM after relocation
- * Pantelis Antoniou, Intracom S.A. , panto@intracom.gr
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -21,28 +22,17 @@
  * MA 02111-1307 USA
  */
 
-#include <common.h>
+#define ASSEMBLY
+#include <linux/config.h>
+#include <config.h>
+#include <asm/blackfin.h>
 
-/*
+.global	start1;
- * CODEC test
+.global	_start1;
- *
- * This test verifies the connection and performs a memory test
- * on any connected codec(s). The meat of the work is done
- * in the board specific function.
- */
 
-#ifdef CONFIG_POST
+.text
-
+_start1:
-#include <post.h>
+start1:
-
+	sp += -12;
-#if CONFIG_POST & CFG_POST_CODEC
+	call	_board_init_f;
-
+	sp += 12;
-extern int board_post_codec(int flags);
-
-int codec_post_test (int flags)
-{
-	return board_post_codec(flags);
-}
-
-#endif /* CONFIG_POST & CFG_POST_CODEC */
-#endif /* CONFIG_POST */

cpu/bf561/traps.c

@@ -0,0 +1,239 @@
+/*
+ * U-boot - traps.c Routines related to interrupts and exceptions
+ *
+ * Copyright (c) 2005 blackfin.uclinux.org
+ *
+ * This file is based on
+ * No original Copyright holder listed,
+ * Probabily original (C) Roman Zippel (assigned DJD, 1999)
+ *
+ * Copyright 2003 Metrowerks - for Blackfin
+ * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca>
+ * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <asm/errno.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include "cpu.h"
+#include <asm/arch/anomaly.h>
+#include <asm/cplb.h>
+#include <asm/io.h>
+
+void init_IRQ(void)
+{
+	blackfin_init_IRQ();
+	return;
+}
+
+void process_int(unsigned long vec, struct pt_regs *fp)
+{
+	printf("interrupt\n");
+	return;
+}
+
+extern unsigned int icplb_table[page_descriptor_table_size][2];
+extern unsigned int dcplb_table[page_descriptor_table_size][2];
+
+unsigned long last_cplb_fault_retx;
+
+static unsigned int cplb_sizes[4] =
+    { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 };
+
+void trap_c(struct pt_regs *regs)
+{
+	unsigned int addr;
+	unsigned long trapnr = (regs->seqstat) & SEQSTAT_EXCAUSE;
+	unsigned int i, j, size, *I0, *I1;
+	unsigned short data = 0;
+
+	switch (trapnr) {
+		/* 0x26 - Data CPLB Miss */
+	case VEC_CPLB_M:
+
+#ifdef ANOMALY_05000261
+		/*
+		 * Work around an anomaly: if we see a new DCPLB fault, return
+		 * without doing anything.  Then, if we get the same fault again,
+		 * handle it.
+		 */
+		addr = last_cplb_fault_retx;
+		last_cplb_fault_retx = regs->retx;
+		printf("this time, curr = 0x%08x last = 0x%08x\n", addr,
+		       last_cplb_fault_retx);
+		if (addr != last_cplb_fault_retx)
+			goto trap_c_return;
+#endif
+		data = 1;
+
+	case VEC_CPLB_I_M:
+
+		if (data)
+			addr = *pDCPLB_FAULT_ADDR;
+		else
+			addr = *pICPLB_FAULT_ADDR;
+
+		for (i = 0; i < page_descriptor_table_size; i++) {
+			if (data) {
+				size = cplb_sizes[dcplb_table[i][1] >> 16];
+				j = dcplb_table[i][0];
+			} else {
+				size = cplb_sizes[icplb_table[i][1] >> 16];
+				j = icplb_table[i][0];
+			}
+			if ((j <= addr) && ((j + size) > addr)) {
+				debug("found %i 0x%08x\n", i, j);
+				break;
+			}
+		}
+		if (i == page_descriptor_table_size) {
+			printf("something is really wrong\n");
+			do_reset(NULL, 0, 0, NULL);
+		}
+
+		/* Turn the cache off */
+		if (data) {
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)DMEM_CONTROL &=
+			    ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+			sync();
+		} else {
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB);
+			sync();
+		}
+
+		if (data) {
+			I0 = (unsigned int *)DCPLB_ADDR0;
+			I1 = (unsigned int *)DCPLB_DATA0;
+		} else {
+			I0 = (unsigned int *)ICPLB_ADDR0;
+			I1 = (unsigned int *)ICPLB_DATA0;
+		}
+
+		j = 0;
+		while (*I1 & CPLB_LOCK) {
+			debug("skipping %i %08p - %08x\n", j, I1, *I1);
+			*I0++;
+			*I1++;
+			j++;
+		}
+
+		debug("remove %i 0x%08x  0x%08x\n", j, *I0, *I1);
+
+		for (; j < 15; j++) {
+			debug("replace %i 0x%08x  0x%08x\n", j, I0, I0 + 1);
+			*I0++ = *(I0 + 1);
+			*I1++ = *(I1 + 1);
+		}
+
+		if (data) {
+			*I0 = dcplb_table[i][0];
+			*I1 = dcplb_table[i][1];
+			I0 = (unsigned int *)DCPLB_ADDR0;
+			I1 = (unsigned int *)DCPLB_DATA0;
+		} else {
+			*I0 = icplb_table[i][0];
+			*I1 = icplb_table[i][1];
+			I0 = (unsigned int *)ICPLB_ADDR0;
+			I1 = (unsigned int *)ICPLB_DATA0;
+		}
+
+		for (j = 0; j < 16; j++) {
+			debug("%i 0x%08x  0x%08x\n", j, *I0++, *I1++);
+		}
+
+		/* Turn the cache back on */
+		if (data) {
+			j = *(unsigned int *)DMEM_CONTROL;
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)DMEM_CONTROL =
+			    ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j;
+			sync();
+		} else {
+			sync();
+			asm(" .align 8; ");
+			*(unsigned int *)IMEM_CONTROL = IMC | ENICPLB;
+			sync();
+		}
+
+		break;
+	default:
+		/* All traps come here */
+		printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f));
+		printf("stack frame=0x%x, ", (unsigned int)regs);
+		printf("bad PC=0x%04x\n", (unsigned int)regs->pc);
+		dump(regs);
+		printf("\n\n");
+
+		printf("Unhandled IRQ or exceptions!\n");
+		printf("Please reset the board \n");
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+trap_c_return:
+	return;
+
+}
+
+void dump(struct pt_regs *fp)
+{
+	debug("RETE:  %08lx  RETN: %08lx  RETX: %08lx  RETS: %08lx\n", fp->rete,
+	      fp->retn, fp->retx, fp->rets);
+	debug("IPEND: %04lx  SYSCFG: %04lx\n", fp->ipend, fp->syscfg);
+	debug("SEQSTAT: %08lx    SP: %08lx\n", (long)fp->seqstat, (long)fp);
+	debug("R0: %08lx    R1: %08lx    R2: %08lx    R3: %08lx\n", fp->r0,
+	      fp->r1, fp->r2, fp->r3);
+	debug("R4: %08lx    R5: %08lx    R6: %08lx    R7: %08lx\n", fp->r4,
+	      fp->r5, fp->r6, fp->r7);
+	debug("P0: %08lx    P1: %08lx    P2: %08lx    P3: %08lx\n", fp->p0,
+	      fp->p1, fp->p2, fp->p3);
+	debug("P4: %08lx    P5: %08lx    FP: %08lx\n", fp->p4, fp->p5, fp->fp);
+	debug("A0.w: %08lx    A0.x: %08lx    A1.w: %08lx    A1.x: %08lx\n",
+	      fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+	debug("LB0: %08lx  LT0: %08lx  LC0: %08lx\n", fp->lb0, fp->lt0,
+	      fp->lc0);
+	debug("LB1: %08lx  LT1: %08lx  LC1: %08lx\n", fp->lb1, fp->lt1,
+	      fp->lc1);
+	debug("B0: %08lx  L0: %08lx  M0: %08lx  I0: %08lx\n", fp->b0, fp->l0,
+	      fp->m0, fp->i0);
+	debug("B1: %08lx  L1: %08lx  M1: %08lx  I1: %08lx\n", fp->b1, fp->l1,
+	      fp->m1, fp->i1);
+	debug("B2: %08lx  L2: %08lx  M2: %08lx  I2: %08lx\n", fp->b2, fp->l2,
+	      fp->m2, fp->i2);
+	debug("B3: %08lx  L3: %08lx  M3: %08lx  I3: %08lx\n", fp->b3, fp->l3,
+	      fp->m3, fp->i3);
+
+	debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR);
+	debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR);
+
+}

cpu/bf561/video.c

@@ -0,0 +1,194 @@
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ * (C) Copyright 2002
+ * Wolfgang Denk, wd@denx.de
+ * (C) Copyright 2006
+ * Aubrey Li, aubrey.li@analog.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <stdarg.h>
+#include <common.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <i2c.h>
+#include <linux/types.h>
+#include <devices.h>
+
+#ifdef CONFIG_VIDEO
+#define NTSC_FRAME_ADDR 0x06000000
+#include "video.h"
+
+/* NTSC OUTPUT SIZE  720 * 240 */
+#define VERTICAL	2
+#define HORIZONTAL	4
+
+int is_vblank_line(const int line)
+{
+	/*
+	 *  This array contains a single bit for each line in
+	 *  an NTSC frame.
+	 */
+	if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528))
+		return true;
+
+	return false;
+}
+
+int NTSC_framebuffer_init(char *base_address)
+{
+	const int NTSC_frames = 1;
+	const int NTSC_lines = 525;
+	char *dest = base_address;
+	int frame_num, line_num;
+
+	for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) {
+		for (line_num = 1; line_num <= NTSC_lines; ++line_num) {
+			unsigned int code;
+			int offset = 0;
+			int i;
+
+			if (is_vblank_line(line_num))
+				offset++;
+
+			if (line_num > 266 || line_num < 3)
+				offset += 2;
+
+			/* Output EAV code */
+			code = SystemCodeMap[offset].EAV;
+			write_dest_byte((char)(code >> 24) & 0xff);
+			write_dest_byte((char)(code >> 16) & 0xff);
+			write_dest_byte((char)(code >> 8) & 0xff);
+			write_dest_byte((char)(code) & 0xff);
+
+			/* Output horizontal blanking */
+			for (i = 0; i < 67 * 2; ++i) {
+				write_dest_byte(0x80);
+				write_dest_byte(0x10);
+			}
+
+			/* Output SAV */
+			code = SystemCodeMap[offset].SAV;
+			write_dest_byte((char)(code >> 24) & 0xff);
+			write_dest_byte((char)(code >> 16) & 0xff);
+			write_dest_byte((char)(code >> 8) & 0xff);
+			write_dest_byte((char)(code) & 0xff);
+
+			/* Output empty horizontal data */
+			for (i = 0; i < 360 * 2; ++i) {
+				write_dest_byte(0x80);
+				write_dest_byte(0x10);
+			}
+		}
+	}
+
+	return dest - base_address;
+}
+
+void fill_frame(char *Frame, int Value)
+{
+	int *OddPtr32;
+	int OddLine;
+	int *EvenPtr32;
+	int EvenLine;
+	int i;
+	int *data;
+	int m, n;
+
+	/* fill odd and even frames */
+	for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) {
+		OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276);
+		EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276);
+		for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) {
+			*OddPtr32 = Value;
+			*EvenPtr32 = Value;
+		}
+	}
+
+	for (m = 0; m < VERTICAL; m++) {
+		data = (int *)u_boot_logo.data;
+		for (OddLine = (22 + m), EvenLine = (285 + m);
+		     OddLine < (u_boot_logo.height * VERTICAL) + (22 + m);
+		     OddLine += VERTICAL, EvenLine += VERTICAL) {
+			OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276);
+			EvenPtr32 =
+			    (int *)((Frame + ((EvenLine) * 1716)) + 276);
+			for (i = 0; i < u_boot_logo.width / 2; i++) {
+				/* enlarge one pixel to m x n */
+				for (n = 0; n < HORIZONTAL; n++) {
+					*OddPtr32++ = *data;
+					*EvenPtr32++ = *data;
+				}
+				data++;
+			}
+		}
+	}
+}
+
+void video_putc(const char c)
+{
+}
+
+void video_puts(const char *s)
+{
+}
+
+static int video_init(void)
+{
+	char *NTSCFrame;
+	NTSCFrame = (char *)NTSC_FRAME_ADDR;
+	NTSC_framebuffer_init(NTSCFrame);
+	fill_frame(NTSCFrame, BLUE);
+
+	*pPPI_CONTROL = 0x0082;
+	*pPPI_FRAME = 0x020D;
+
+	*pDMA0_START_ADDR = NTSCFrame;
+	*pDMA0_X_COUNT = 0x035A;
+	*pDMA0_X_MODIFY = 0x0002;
+	*pDMA0_Y_COUNT = 0x020D;
+	*pDMA0_Y_MODIFY = 0x0002;
+	*pDMA0_CONFIG = 0x1015;
+	*pPPI_CONTROL = 0x0083;
+	return 0;
+}
+
+int drv_video_init(void)
+{
+	int error, devices = 1;
+
+	device_t videodev;
+
+	video_init();		/* Video initialization */
+
+	memset(&videodev, 0, sizeof(videodev));
+
+	strcpy(videodev.name, "video");
+	videodev.ext = DEV_EXT_VIDEO;	/* Video extensions */
+	videodev.flags = DEV_FLAGS_OUTPUT;	/* Output only */
+	videodev.putc = video_putc;	/* 'putc' function */
+	videodev.puts = video_puts;	/* 'puts' function */
+
+	error = device_register(&videodev);
+
+	return (error == 0) ? devices : error;
+}
+#endif

cpu/bf561/video.h

@@ -0,0 +1,25 @@
+#include <video_logo.h>
+#define write_dest_byte(val) {*dest++=val;}
+#define BLACK   (0x01800180)	/* black pixel pattern  */
+#define BLUE    (0x296E29F0)	/* blue pixel pattern   */
+#define RED     (0x51F0515A)	/* red pixel pattern    */
+#define MAGENTA (0x6ADE6ACA)	/* magenta pixel pattern */
+#define GREEN   (0x91229136)	/* green pixel pattern  */
+#define CYAN    (0xAA10AAA6)	/* cyan pixel pattern   */
+#define YELLOW  (0xD292D210)	/* yellow pixel pattern */
+#define WHITE   (0xFE80FE80)	/* white pixel pattern  */
+
+#define true 	1
+#define false	0
+
+typedef struct {
+	unsigned int SAV;
+	unsigned int EAV;
+} SystemCodeType;
+
+const SystemCodeType SystemCodeMap[4] = {
+	{0xFF000080, 0xFF00009D},
+	{0xFF0000AB, 0xFF0000B6},
+	{0xFF0000C7, 0xFF0000DA},
+	{0xFF0000EC, 0xFF0000F1}
+};

cpu/mpc8260/cpu_init.c

@@ -129,9 +129,9 @@ void cpu_init_f (volatile immap_t * immr)
 	/* BCR - Bus Configuration Register (4-25) */
 #if defined(CFG_BCR_60x) && (CFG_BCR_SINGLE)
 	if (immr->im_siu_conf.sc_bcr & BCR_EBM) {
-		immr->im_siu_conf.sc_bcr = CFG_BCR_60x;
+		immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CFG_BCR_60x, 0x80000010);
 	} else {
-		immr->im_siu_conf.sc_bcr = CFG_BCR_SINGLE;
+		immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CFG_BCR_SINGLE, 0x80000010);
 	}
 #else
 	immr->im_siu_conf.sc_bcr = CFG_BCR;
@@ -141,9 +141,9 @@ void cpu_init_f (volatile immap_t * immr)
 #if defined(CFG_SIUMCR_LOW) && (CFG_SIUMCR_HIGH)
 	cpu_clk = board_get_cpu_clk_f ();
 	if (cpu_clk >= 100000000) {
-		immr->im_siu_conf.sc_siumcr = CFG_SIUMCR_HIGH;
+		immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CFG_SIUMCR_HIGH, 0x9f3cc000);
 	} else {
-		immr->im_siu_conf.sc_siumcr = CFG_SIUMCR_LOW;
+		immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CFG_SIUMCR_LOW, 0x9f3cc000);
 	}
 #else
 	immr->im_siu_conf.sc_siumcr = CFG_SIUMCR;

cpu/mpc8260/pci.c

@@ -275,22 +275,7 @@ void pci_mpc8250_init (struct pci_controller *hose)
 				  | SIUMCR_BCTLC00
 				  | SIUMCR_MMR11;
 #elif defined(CONFIG_TQM8272)
-#if 0
+/* nothing to do for this Board here */
-	immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
-						~SIUMCR_LBPC11 &
-						~SIUMCR_CS10PC11 &
-						~SIUMCR_LBPC11) |
-					SIUMCR_LBPC01 |
-					SIUMCR_CS10PC01 |
-					SIUMCR_APPC10;
-#else
-#if 0
-	immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr |
-					SIUMCR_APPC10);
-#else
-	immap->im_siu_conf.sc_siumcr = 0x88000000;
-#endif
-#endif
 #else
 	/*
 	 * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
@@ -304,7 +289,6 @@ void pci_mpc8250_init (struct pci_controller *hose)
 					SIUMCR_CS10PC01 |
 					SIUMCR_APPC10;
 #endif
-printf("%s siumcr: %x\n", __FUNCTION__, immap->im_siu_conf.sc_siumcr);
 
 	/* Make PCI lowest priority */
 	/* Each 4 bits is a device bus request	and the MS 4bits

cpu/mpc86xx/interrupts.c

@@ -80,6 +80,26 @@ int interrupt_init(void)
 {
 	int ret;
 
+	/*
+	 * The IRQ0 on Rev 2 is pulled high (low in Rev 1.x) to
+	 * implement PEX10 errata.  As INT is active high, it
+	 * will cause core to take 0x500 interrupt.
+	 *
+	 * Due to the PIC's default pass through mode, as soon
+	 * as interrupts are enabled (MSR[EE] = 1), an interrupt
+	 * will be taken and u-boot will hang.  This is due to a
+	 * hardware change (per an errata fix) on new revisions
+	 * of the board with Rev 2.x parts.
+	 *
+	 * Setting the PIC to mixed mode prevents the hang.
+	 */
+	if ((get_svr() & 0xf0) == 0x20) {
+		volatile immap_t *immr = (immap_t *)CFG_IMMR;
+		immr->im_pic.gcr = MPC86xx_PICGCR_RST;
+		while (immr->im_pic.gcr & MPC86xx_PICGCR_RST);
+		immr->im_pic.gcr = MPC86xx_PICGCR_MODE;
+	}
+
 	/* call cpu specific function from $(CPU)/interrupts.c */
 	ret = interrupt_init_cpu(&decrementer_count);