Patch by Jon Loeliger, 17 June 2004:
Completion of the 8540ADS/8560ADS updates: Fix some PCI and Rapid I/O memory maps, Initialize both TSEC 1 and 2, Initialize SDRAM Update MAINTAINER for 85xx boards and README.mpc85xxads
This commit is contained in:
wdenk
parent
262381329b
commit
0ac6f8b749
|
|
@ -2,6 +2,13 @@
|
|||
Changes since U-Boot 1.1.1:
|
||||
======================================================================
|
||||
|
||||
* Patch by Jon Loeliger, 17 June 2004:
|
||||
Completion of the 8540ADS/8560ADS updates:
|
||||
Fix some PCI and Rapid I/O memory maps,
|
||||
Initialize both TSEC 1 and 2,
|
||||
Initialize SDRAM
|
||||
Update MAINTAINER for 85xx boards and README.mpc85xxads
|
||||
|
||||
* Patch by Yuli Barcohen, 16 Jun 2004:
|
||||
Remove obsolete AdderII port which was superseded by unified
|
||||
AdderII/Adder87x port
|
||||
|
|
|
|||
|
|
@ -184,7 +184,7 @@ Eran Man <eran@nbase.co.il>
|
|||
Andrea "llandre" Marson <andrea.marson@dave-tech.it>
|
||||
|
||||
PPChameleonEVB PPC405EP
|
||||
|
||||
|
||||
Reinhard Meyer <r.meyer@emk-elektronik.de>
|
||||
|
||||
TOP860 MPC860T
|
||||
|
|
@ -270,7 +270,7 @@ John Zhan <zhanz@sinovee.com>
|
|||
|
||||
svm_sc8xx MPC8xx
|
||||
|
||||
Xianghua Xiao <x.xiao@motorola.com>
|
||||
Jon Loeliger <jdl@freescale.com>
|
||||
|
||||
MPC8540ADS MPC8540
|
||||
MPC8560ADS MPC8560
|
||||
|
|
@ -376,7 +376,7 @@ Robert Schwebel <r.schwebel@pengutronix.de>
|
|||
Andrea Scian <andrea.scian@dave-tech.it>
|
||||
|
||||
B2 ARM7TDMI (S3C44B0X)
|
||||
|
||||
|
||||
Alex Züpke <azu@sysgo.de>
|
||||
|
||||
lart SA1100
|
||||
|
|
|
|||
6
Makefile
6
Makefile
|
|
@ -1001,13 +1001,13 @@ M5282EVB_config : unconfig
|
|||
## MPC85xx Systems
|
||||
#########################################################################
|
||||
|
||||
MPC8540ADS_config: unconfig
|
||||
MPC8540ADS_config: unconfig
|
||||
@./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
|
||||
|
||||
MPC8560ADS_config: unconfig
|
||||
MPC8560ADS_config: unconfig
|
||||
@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
|
||||
|
||||
stxgp3_config: unconfig
|
||||
stxgp3_config: unconfig
|
||||
@./mkconfig $(@:_config=) ppc mpc85xx stxgp3
|
||||
|
||||
#########################################################################
|
||||
|
|
|
|||
|
|
@ -29,15 +29,11 @@
|
|||
#include <command.h>
|
||||
#include <malloc.h>
|
||||
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
|
||||
|
||||
/* Prototypes */
|
||||
int gunzip(void *, int, unsigned char *, int *);
|
||||
|
||||
|
||||
int board_early_init_f (void)
|
||||
{
|
||||
out32(GPIO0_OR, CFG_NAND0_CE); /* set initial outputs */
|
||||
|
|
@ -71,11 +67,9 @@ int board_early_init_f (void)
|
|||
#else
|
||||
mtebc (epcr, 0x28400000); /* ebc in high-z */
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
int misc_init_f (void)
|
||||
|
|
@ -168,7 +162,6 @@ int misc_init_r (void)
|
|||
udelay(1000); /* wait 1ms */
|
||||
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
|
||||
udelay(1000); /* wait 1ms */
|
||||
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
|
|
@ -186,7 +179,6 @@ int misc_init_r (void)
|
|||
return (0);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Check Board Identity:
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -45,7 +45,8 @@
|
|||
tlb1_entry:
|
||||
entry_start
|
||||
|
||||
.long 0x0a /* the following data table uses a few of 16 TLB entries */
|
||||
/* Number of entries in the following table */
|
||||
.long 0x0c
|
||||
|
||||
.long TLB1_MAS0(1,1,0)
|
||||
.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
|
||||
|
|
@ -116,40 +117,57 @@ tlb1_entry:
|
|||
|
||||
.long TLB1_MAS0(1,8,0)
|
||||
.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
|
||||
.long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
|
||||
.long TLB1_MAS2(((CFG_PCI1_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(((CFG_PCI1_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
.long TLB1_MAS0(1,9,0)
|
||||
.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
|
||||
.long TLB1_MAS2(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
|
||||
/*
|
||||
* RapidIO MMU for 512M
|
||||
* Two entries, 10 and 11
|
||||
*/
|
||||
.long TLB1_MAS0(1,10,0)
|
||||
.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
|
||||
.long TLB1_MAS2(((CFG_RIO_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(((CFG_RIO_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
.long TLB1_MAS0(1,11,0)
|
||||
.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
|
||||
.long TLB1_MAS2(((CFG_RIO_MEM_BASE+0x10000000>>12) & 0xfffff),0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(((CFG_RIO_MEM_BASE+0x10000000>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
|
||||
#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
|
||||
.long TLB1_MAS0(1,15,0)
|
||||
.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
|
||||
.long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
|
||||
#else
|
||||
#else
|
||||
.long TLB1_MAS0(1,15,0)
|
||||
.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
|
||||
.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
|
||||
.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
|
||||
#endif
|
||||
#endif
|
||||
entry_end
|
||||
|
||||
/*
|
||||
* LAW(Local Access Window) configuration:
|
||||
*
|
||||
* 0x0000_0000 0x7fff_ffff DDR 2G
|
||||
* 0x8000_0000 0x9fff_ffff PCI MEM 512M
|
||||
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
|
||||
* 0xc000_0000 0xdfff_ffff RapidIO 512M
|
||||
* 0xe000_0000 0xe000_ffff CCSR 1M
|
||||
* 0xe200_0000 0xe2ff_ffff PCI IO 16M
|
||||
* 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
|
||||
* 0xf000_0000 0xf7ff_ffff SDRAM 128M
|
||||
* 0xf800_0000 0xf80f_ffff BCSR 1M
|
||||
* 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M
|
||||
*
|
||||
* Note: CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
|
||||
* Note: If flash is 8M at default position(last 8M),no LAW needed.
|
||||
* Notes:
|
||||
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
|
||||
* If flash is 8M at default position (last 8M), no LAW needed.
|
||||
*/
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
|
|
@ -160,7 +178,7 @@ tlb1_entry:
|
|||
#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
|
||||
#endif
|
||||
|
||||
#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
|
||||
#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
|
||||
#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
|
||||
|
||||
/*
|
||||
|
|
@ -174,14 +192,14 @@ tlb1_entry:
|
|||
#define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
|
||||
#endif
|
||||
|
||||
#define LAWBAR3 ((CFG_PCI_IO_BASE>>12) & 0xfffff)
|
||||
#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
|
||||
#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
|
||||
|
||||
/*
|
||||
* Rapid IO at 0xc000_0000 for 512 M
|
||||
*/
|
||||
#define LAWBAR4 ((CFG_RAPID_IO_BASE>>12) & 0xfffff)
|
||||
#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
|
||||
#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
|
||||
#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
|
||||
|
||||
|
||||
.section .bootpg, "ax"
|
||||
|
|
|
|||
|
|
@ -1,4 +1,5 @@
|
|||
/*
|
||||
* Copyright 2004 Freescale Semiconductor.
|
||||
* (C) Copyright 2002,2003, Motorola Inc.
|
||||
* Xianghua Xiao, (X.Xiao@motorola.com)
|
||||
*
|
||||
|
|
@ -24,75 +25,69 @@
|
|||
*/
|
||||
|
||||
|
||||
extern long int spd_sdram (void);
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/immap_85xx.h>
|
||||
#include <spd.h>
|
||||
|
||||
long int fixed_sdram (void);
|
||||
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
void dma_init(void);
|
||||
uint dma_check(void);
|
||||
int dma_xfer(void *dest, uint count, void *src);
|
||||
extern void ddr_enable_ecc(unsigned int dram_size);
|
||||
#endif
|
||||
|
||||
extern long int spd_sdram(void);
|
||||
|
||||
void sdram_init(void);
|
||||
long int fixed_sdram(void);
|
||||
|
||||
/* MPC8540ADS Board Status & Control Registers */
|
||||
#if 0
|
||||
typedef struct bscr_ {
|
||||
unsigned long bcsr0;
|
||||
unsigned long bcsr1;
|
||||
unsigned long bcsr2;
|
||||
unsigned long bcsr3;
|
||||
unsigned long bcsr4;
|
||||
unsigned long bcsr5;
|
||||
unsigned long bcsr6;
|
||||
unsigned long bcsr7;
|
||||
} bcsr_t;
|
||||
#endif
|
||||
|
||||
int board_early_init_f (void)
|
||||
{
|
||||
#if defined(CONFIG_PCI)
|
||||
volatile immap_t *immr = (immap_t *)CFG_IMMR;
|
||||
volatile ccsr_pcix_t *pci = &immr->im_pcix;
|
||||
volatile immap_t *immr = (immap_t *) CFG_IMMR;
|
||||
volatile ccsr_pcix_t *pci = &immr->im_pcix;
|
||||
|
||||
pci->peer &= 0xffffffdf; /* disable master abort */
|
||||
pci->peer &= 0xffffffdf; /* disable master abort */
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int checkboard (void)
|
||||
{
|
||||
puts("Board: ADS\n");
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
printf(" PCI1: 32 bit, %d MHz (compiled)\n",
|
||||
CONFIG_SYS_CLK_FREQ / 1000000);
|
||||
#else
|
||||
printf(" PCI1: disabled\n");
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
long int initdram (int board_type)
|
||||
long int
|
||||
initdram(int board_type)
|
||||
{
|
||||
long dram_size = 0;
|
||||
extern long spd_sdram (void);
|
||||
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
||||
#if !defined(CONFIG_RAM_AS_FLASH)
|
||||
volatile ccsr_lbc_t *lbc= &immap->im_lbc;
|
||||
sys_info_t sysinfo;
|
||||
uint temp_lbcdll = 0;
|
||||
#endif
|
||||
#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
|
||||
volatile ccsr_gur_t *gur= &immap->im_gur;
|
||||
#endif
|
||||
|
||||
puts("Initializing\n");
|
||||
|
||||
#if defined(CONFIG_DDR_DLL)
|
||||
uint temp_ddrdll = 0;
|
||||
{
|
||||
volatile ccsr_gur_t *gur= &immap->im_gur;
|
||||
uint temp_ddrdll = 0;
|
||||
|
||||
/* Work around to stabilize DDR DLL */
|
||||
temp_ddrdll = gur->ddrdllcr;
|
||||
gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
|
||||
asm("sync;isync;msync");
|
||||
/*
|
||||
* Work around to stabilize DDR DLL
|
||||
*/
|
||||
temp_ddrdll = gur->ddrdllcr;
|
||||
gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
|
||||
asm("sync;isync;msync");
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPD_EEPROM)
|
||||
|
|
@ -101,98 +96,120 @@ long int initdram (int board_type)
|
|||
dram_size = fixed_sdram ();
|
||||
#endif
|
||||
|
||||
#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
|
||||
get_sys_info(&sysinfo);
|
||||
/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
|
||||
if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
|
||||
lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
/*
|
||||
* Initialize and enable DDR ECC.
|
||||
*/
|
||||
ddr_enable_ecc(dram_size);
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Initialize SDRAM.
|
||||
*/
|
||||
sdram_init();
|
||||
|
||||
puts(" DDR: ");
|
||||
return dram_size;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Initialize SDRAM memory on the Local Bus.
|
||||
*/
|
||||
|
||||
void sdram_init (void)
|
||||
{
|
||||
#if !defined(CONFIG_RAM_AS_FLASH)
|
||||
sys_info_t sysinfo;
|
||||
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
||||
volatile ccsr_lbc_t *lbc = &immap->im_lbc;
|
||||
uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
|
||||
|
||||
puts (" SDRAM: ");
|
||||
print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
|
||||
|
||||
/*
|
||||
* LocalBus SDRAM is not emulating flash.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Fix Local Bus clock glitch. Errata LBC11.
|
||||
*
|
||||
* If localbus freq is less than 66Mhz, use bypass mode,
|
||||
* otherwise use DLL.
|
||||
* lcrr is the local-bus clock ratio register.
|
||||
*/
|
||||
get_sys_info (&sysinfo);
|
||||
if (sysinfo.freqSystemBus / (CFG_LBC_LCRR & 0x0f) < 66000000) {
|
||||
lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff) | 0x80000000;
|
||||
|
||||
} else {
|
||||
uint pvr = get_pvr();
|
||||
/*
|
||||
* On REV1 boards, need to change CLKDIV before enable DLL.
|
||||
* Default CLKDIV is 8, change it to 4 temporarily.
|
||||
*/
|
||||
volatile ccsr_gur_t *gur = &immap->im_gur;
|
||||
uint pvr = get_pvr ();
|
||||
uint temp_lbcdll = 0;
|
||||
|
||||
if (pvr == PVR_85xx_REV1) {
|
||||
/*
|
||||
* Need change CLKDIV before enable DLL.
|
||||
* Default CLKDIV is 8, change it to 4
|
||||
* temporarily.
|
||||
*/
|
||||
lbc->lcrr = 0x10000004;
|
||||
lbc->lcrr = 0x10000004;
|
||||
}
|
||||
|
||||
/* FIXME: jdl Should lcrr have 0x8000000 OR'ed in here too? */
|
||||
lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
|
||||
udelay(200);
|
||||
udelay (200);
|
||||
temp_lbcdll = gur->lbcdllcr;
|
||||
gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
|
||||
asm("sync;isync;msync");
|
||||
gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16) | 0x80000000;
|
||||
asm ("sync;isync;msync");
|
||||
}
|
||||
lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
|
||||
|
||||
/*
|
||||
* Setup SDRAM Base and Option Registers
|
||||
*/
|
||||
lbc->or2 = CFG_OR2_PRELIM;
|
||||
lbc->br2 = CFG_BR2_PRELIM;
|
||||
lbc->lbcr = CFG_LBC_LBCR;
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_1;
|
||||
asm("sync");
|
||||
(unsigned int) * (ulong *)0 = 0x000000ff;
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_2;
|
||||
asm("sync");
|
||||
(unsigned int) * (ulong *)0 = 0x000000ff;
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_3;
|
||||
asm("sync");
|
||||
(unsigned int) * (ulong *)0 = 0x000000ff;
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_4;
|
||||
asm("sync");
|
||||
(unsigned int) * (ulong *)0 = 0x000000ff;
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_5;
|
||||
asm("sync");
|
||||
asm ("msync");
|
||||
|
||||
lbc->lsrt = CFG_LBC_LSRT;
|
||||
asm("sync");
|
||||
lbc->mrtpr = CFG_LBC_MRTPR;
|
||||
asm("sync");
|
||||
asm ("sync");
|
||||
|
||||
/*
|
||||
* Configure the SDRAM controller.
|
||||
*/
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_1;
|
||||
asm ("sync");
|
||||
*sdram_addr = 0xff;
|
||||
ppcDcbf ((unsigned long) sdram_addr);
|
||||
udelay (100);
|
||||
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_2;
|
||||
asm ("sync");
|
||||
*sdram_addr = 0xff;
|
||||
ppcDcbf ((unsigned long) sdram_addr);
|
||||
udelay (100);
|
||||
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_3;
|
||||
asm ("sync");
|
||||
*sdram_addr = 0xff;
|
||||
ppcDcbf ((unsigned long) sdram_addr);
|
||||
udelay (100);
|
||||
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_4;
|
||||
asm ("sync");
|
||||
*sdram_addr = 0xff;
|
||||
ppcDcbf ((unsigned long) sdram_addr);
|
||||
udelay (100);
|
||||
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_5;
|
||||
asm ("sync");
|
||||
*sdram_addr = 0xff;
|
||||
ppcDcbf ((unsigned long) sdram_addr);
|
||||
udelay (100);
|
||||
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
{
|
||||
/* Initialize all of memory for ECC, then
|
||||
* enable errors */
|
||||
uint *p = 0;
|
||||
uint i = 0;
|
||||
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
||||
volatile ccsr_ddr_t *ddr= &immap->im_ddr;
|
||||
dma_init();
|
||||
for (*p = 0; p < (uint *)(8 * 1024); p++) {
|
||||
if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
|
||||
*p = (unsigned int)0xdeadbeef;
|
||||
if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
|
||||
}
|
||||
|
||||
/* 8K */
|
||||
dma_xfer((uint *)0x2000,0x2000,(uint *)0);
|
||||
/* 16K */
|
||||
dma_xfer((uint *)0x4000,0x4000,(uint *)0);
|
||||
/* 32K */
|
||||
dma_xfer((uint *)0x8000,0x8000,(uint *)0);
|
||||
/* 64K */
|
||||
dma_xfer((uint *)0x10000,0x10000,(uint *)0);
|
||||
/* 128k */
|
||||
dma_xfer((uint *)0x20000,0x20000,(uint *)0);
|
||||
/* 256k */
|
||||
dma_xfer((uint *)0x40000,0x40000,(uint *)0);
|
||||
/* 512k */
|
||||
dma_xfer((uint *)0x80000,0x80000,(uint *)0);
|
||||
/* 1M */
|
||||
dma_xfer((uint *)0x100000,0x100000,(uint *)0);
|
||||
/* 2M */
|
||||
dma_xfer((uint *)0x200000,0x200000,(uint *)0);
|
||||
/* 4M */
|
||||
dma_xfer((uint *)0x400000,0x400000,(uint *)0);
|
||||
|
||||
for (i = 1; i < dram_size / 0x800000; i++) {
|
||||
dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
|
||||
}
|
||||
|
||||
/* Enable errors for ECC */
|
||||
ddr->err_disable = 0x00000000;
|
||||
asm("sync;isync;msync");
|
||||
}
|
||||
#endif
|
||||
|
||||
return dram_size;
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -262,6 +279,6 @@ long int fixed_sdram (void)
|
|||
asm("sync; isync; msync");
|
||||
udelay(500);
|
||||
#endif
|
||||
return (CFG_SDRAM_SIZE * 1024 * 1024);
|
||||
return CFG_SDRAM_SIZE * 1024 * 1024;
|
||||
}
|
||||
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
||||
|
|
|
|||
|
|
@ -45,7 +45,8 @@
|
|||
tlb1_entry:
|
||||
entry_start
|
||||
|
||||
.long 0x0a /* the following data table uses a few of 16 TLB entries */
|
||||
/* Number of entries in the following table */
|
||||
.long 0x0c
|
||||
|
||||
.long TLB1_MAS0(1,1,0)
|
||||
.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
|
||||
|
|
@ -116,40 +117,57 @@ tlb1_entry:
|
|||
|
||||
.long TLB1_MAS0(1,8,0)
|
||||
.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
|
||||
.long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
|
||||
.long TLB1_MAS2(((CFG_PCI1_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(((CFG_PCI1_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
.long TLB1_MAS0(1,9,0)
|
||||
.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
|
||||
.long TLB1_MAS2(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
|
||||
/*
|
||||
* RapidIO MMU for 512M
|
||||
* Two entries, 10 and 11
|
||||
*/
|
||||
.long TLB1_MAS0(1,10,0)
|
||||
.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
|
||||
.long TLB1_MAS2(((CFG_RIO_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(((CFG_RIO_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
.long TLB1_MAS0(1,11,0)
|
||||
.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
|
||||
.long TLB1_MAS2(((CFG_RIO_MEM_BASE+0x10000000>>12) & 0xfffff),0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(((CFG_RIO_MEM_BASE+0x10000000>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
|
||||
|
||||
|
||||
#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
|
||||
.long TLB1_MAS0(1,15,0)
|
||||
.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
|
||||
.long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
|
||||
.long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
|
||||
#else
|
||||
#else
|
||||
.long TLB1_MAS0(1,15,0)
|
||||
.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
|
||||
.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
|
||||
.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
|
||||
#endif
|
||||
#endif
|
||||
entry_end
|
||||
|
||||
/*
|
||||
* LAW(Local Access Window) configuration:
|
||||
*
|
||||
* 0x0000_0000 0x7fff_ffff DDR 2G
|
||||
* 0x8000_0000 0x9fff_ffff PCI MEM 512M
|
||||
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
|
||||
* 0xc000_0000 0xdfff_ffff RapidIO 512M
|
||||
* 0xe000_0000 0xe000_ffff CCSR 1M
|
||||
* 0xe200_0000 0xe2ff_ffff PCI IO 16M
|
||||
* 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
|
||||
* 0xf000_0000 0xf7ff_ffff SDRAM 128M
|
||||
* 0xf800_0000 0xf80f_ffff BCSR 1M
|
||||
* 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M
|
||||
*
|
||||
* Note: CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
|
||||
* Note: If flash is 8M at default position(last 8M),no LAW needed.
|
||||
* Notes:
|
||||
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
|
||||
* If flash is 8M at default position (last 8M), no LAW needed.
|
||||
*/
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
|
|
@ -160,7 +178,7 @@ tlb1_entry:
|
|||
#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
|
||||
#endif
|
||||
|
||||
#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
|
||||
#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
|
||||
#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
|
||||
|
||||
/*
|
||||
|
|
@ -174,14 +192,14 @@ tlb1_entry:
|
|||
#define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
|
||||
#endif
|
||||
|
||||
#define LAWBAR3 ((CFG_PCI_IO_BASE>>12) & 0xfffff)
|
||||
#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
|
||||
#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
|
||||
|
||||
/*
|
||||
* Rapid IO at 0xc000_0000 for 512 M
|
||||
*/
|
||||
#define LAWBAR4 ((CFG_RAPID_IO_BASE>>12) & 0xfffff)
|
||||
#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
|
||||
#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
|
||||
#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
|
||||
|
||||
|
||||
.section .bootpg, "ax"
|
||||
|
|
|
|||
|
|
@ -25,8 +25,6 @@
|
|||
*/
|
||||
|
||||
|
||||
extern long int spd_sdram (void);
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/immap_85xx.h>
|
||||
|
|
@ -34,7 +32,15 @@ extern long int spd_sdram (void);
|
|||
#include <spd.h>
|
||||
#include <miiphy.h>
|
||||
|
||||
long int fixed_sdram (void);
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
extern void ddr_enable_ecc(unsigned int dram_size);
|
||||
#endif
|
||||
|
||||
extern long int spd_sdram(void);
|
||||
|
||||
void sdram_init(void);
|
||||
long int fixed_sdram(void);
|
||||
|
||||
|
||||
/*
|
||||
* I/O Port configuration table
|
||||
|
|
@ -190,8 +196,11 @@ const iop_conf_t iop_conf_tab[4][32] = {
|
|||
}
|
||||
};
|
||||
|
||||
/* MPC8560ADS Board Status & Control Registers */
|
||||
typedef struct bscr_ {
|
||||
|
||||
/*
|
||||
* MPC8560ADS Board Status & Control Registers
|
||||
*/
|
||||
typedef struct bcsr_ {
|
||||
volatile unsigned char bcsr0;
|
||||
volatile unsigned char bcsr1;
|
||||
volatile unsigned char bcsr2;
|
||||
|
|
@ -203,11 +212,12 @@ typedef struct bscr_ {
|
|||
int board_early_init_f (void)
|
||||
{
|
||||
#if defined(CONFIG_PCI)
|
||||
volatile immap_t *immr = (immap_t *)CFG_IMMR;
|
||||
volatile ccsr_pcix_t *pci = &immr->im_pcix;
|
||||
volatile immap_t *immr = (immap_t *) CFG_IMMR;
|
||||
volatile ccsr_pcix_t *pci = &immr->im_pcix;
|
||||
|
||||
pci->peer &= 0xfffffffdf; /* disable master abort */
|
||||
pci->peer &= 0xffffffdf; /* disable master abort */
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -237,35 +247,41 @@ void reset_phy (void)
|
|||
#endif /* CONFIG_MII */
|
||||
}
|
||||
|
||||
|
||||
int checkboard (void)
|
||||
{
|
||||
puts("Board: ADS\n");
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
printf(" PCI1: 32 bit, %d MHz (compiled)\n",
|
||||
CONFIG_SYS_CLK_FREQ / 1000000);
|
||||
#else
|
||||
printf(" PCI1: disabled\n");
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
long int initdram (int board_type)
|
||||
long int
|
||||
initdram(int board_type)
|
||||
{
|
||||
long dram_size = 0;
|
||||
extern long spd_sdram (void);
|
||||
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
||||
#if !defined(CONFIG_RAM_AS_FLASH)
|
||||
volatile ccsr_lbc_t *lbc= &immap->im_lbc;
|
||||
sys_info_t sysinfo;
|
||||
uint temp_lbcdll = 0;
|
||||
#endif
|
||||
#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
|
||||
volatile ccsr_gur_t *gur= &immap->im_gur;
|
||||
#endif
|
||||
|
||||
puts("Initializing\n");
|
||||
|
||||
#if defined(CONFIG_DDR_DLL)
|
||||
uint temp_ddrdll = 0;
|
||||
{
|
||||
volatile ccsr_gur_t *gur= &immap->im_gur;
|
||||
uint temp_ddrdll = 0;
|
||||
|
||||
/* Work around to stabilize DDR DLL */
|
||||
temp_ddrdll = gur->ddrdllcr;
|
||||
gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
|
||||
asm("sync;isync;msync");
|
||||
/*
|
||||
* Work around to stabilize DDR DLL
|
||||
*/
|
||||
temp_ddrdll = gur->ddrdllcr;
|
||||
gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
|
||||
asm("sync;isync;msync");
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPD_EEPROM)
|
||||
|
|
@ -274,98 +290,120 @@ long int initdram (int board_type)
|
|||
dram_size = fixed_sdram ();
|
||||
#endif
|
||||
|
||||
#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
|
||||
get_sys_info(&sysinfo);
|
||||
/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
|
||||
if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
|
||||
lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
/*
|
||||
* Initialize and enable DDR ECC.
|
||||
*/
|
||||
ddr_enable_ecc(dram_size);
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Initialize SDRAM.
|
||||
*/
|
||||
sdram_init();
|
||||
|
||||
puts(" DDR: ");
|
||||
return dram_size;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Initialize SDRAM memory on the Local Bus.
|
||||
*/
|
||||
|
||||
void sdram_init (void)
|
||||
{
|
||||
#if !defined(CONFIG_RAM_AS_FLASH)
|
||||
sys_info_t sysinfo;
|
||||
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
||||
volatile ccsr_lbc_t *lbc = &immap->im_lbc;
|
||||
uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
|
||||
|
||||
puts (" SDRAM: ");
|
||||
print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
|
||||
|
||||
/*
|
||||
* LocalBus SDRAM is not emulating flash.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Fix Local Bus clock glitch. Errata LBC11.
|
||||
*
|
||||
* If localbus freq is less than 66Mhz, use bypass mode,
|
||||
* otherwise use DLL.
|
||||
* lcrr is the local-bus clock ratio register.
|
||||
*/
|
||||
get_sys_info (&sysinfo);
|
||||
if (sysinfo.freqSystemBus / (CFG_LBC_LCRR & 0x0f) < 66000000) {
|
||||
lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff) | 0x80000000;
|
||||
|
||||
} else {
|
||||
uint pvr = get_pvr();
|
||||
/*
|
||||
* On REV1 boards, need to change CLKDIV before enable DLL.
|
||||
* Default CLKDIV is 8, change it to 4 temporarily.
|
||||
*/
|
||||
volatile ccsr_gur_t *gur = &immap->im_gur;
|
||||
uint pvr = get_pvr ();
|
||||
uint temp_lbcdll = 0;
|
||||
|
||||
if (pvr == PVR_85xx_REV1) {
|
||||
/*
|
||||
* Need change CLKDIV before enable DLL.
|
||||
* Default CLKDIV is 8, change it to 4
|
||||
* temporarily.
|
||||
*/
|
||||
lbc->lcrr = 0x10000004;
|
||||
lbc->lcrr = 0x10000004;
|
||||
}
|
||||
|
||||
/* FIXME: jdl Should lcrr have 0x8000000 OR'ed in here too? */
|
||||
lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
|
||||
udelay(200);
|
||||
udelay (200);
|
||||
temp_lbcdll = gur->lbcdllcr;
|
||||
gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
|
||||
asm("sync;isync;msync");
|
||||
gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16) | 0x80000000;
|
||||
asm ("sync;isync;msync");
|
||||
}
|
||||
lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
|
||||
|
||||
/*
|
||||
* Setup SDRAM Base and Option Registers
|
||||
*/
|
||||
lbc->or2 = CFG_OR2_PRELIM;
|
||||
lbc->br2 = CFG_BR2_PRELIM;
|
||||
lbc->lbcr = CFG_LBC_LBCR;
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_1;
|
||||
asm("sync");
|
||||
(unsigned int) * (ulong *)0 = 0x000000ff;
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_2;
|
||||
asm("sync");
|
||||
(unsigned int) * (ulong *)0 = 0x000000ff;
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_3;
|
||||
asm("sync");
|
||||
(unsigned int) * (ulong *)0 = 0x000000ff;
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_4;
|
||||
asm("sync");
|
||||
(unsigned int) * (ulong *)0 = 0x000000ff;
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_5;
|
||||
asm("sync");
|
||||
asm ("msync");
|
||||
|
||||
lbc->lsrt = CFG_LBC_LSRT;
|
||||
asm("sync");
|
||||
lbc->mrtpr = CFG_LBC_MRTPR;
|
||||
asm("sync");
|
||||
asm ("sync");
|
||||
|
||||
/*
|
||||
* Configure the SDRAM controller.
|
||||
*/
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_1;
|
||||
asm ("sync");
|
||||
*sdram_addr = 0xff;
|
||||
ppcDcbf ((unsigned long) sdram_addr);
|
||||
udelay (100);
|
||||
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_2;
|
||||
asm ("sync");
|
||||
*sdram_addr = 0xff;
|
||||
ppcDcbf ((unsigned long) sdram_addr);
|
||||
udelay (100);
|
||||
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_3;
|
||||
asm ("sync");
|
||||
*sdram_addr = 0xff;
|
||||
ppcDcbf ((unsigned long) sdram_addr);
|
||||
udelay (100);
|
||||
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_4;
|
||||
asm ("sync");
|
||||
*sdram_addr = 0xff;
|
||||
ppcDcbf ((unsigned long) sdram_addr);
|
||||
udelay (100);
|
||||
|
||||
lbc->lsdmr = CFG_LBC_LSDMR_5;
|
||||
asm ("sync");
|
||||
*sdram_addr = 0xff;
|
||||
ppcDcbf ((unsigned long) sdram_addr);
|
||||
udelay (100);
|
||||
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
{
|
||||
/* Initialize all of memory for ECC, then
|
||||
* enable errors */
|
||||
uint *p = 0;
|
||||
uint i = 0;
|
||||
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
||||
volatile ccsr_ddr_t *ddr= &immap->im_ddr;
|
||||
dma_init();
|
||||
for (*p = 0; p < (uint *)(8 * 1024); p++) {
|
||||
if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
|
||||
*p = (unsigned int)0xdeadbeef;
|
||||
if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
|
||||
}
|
||||
|
||||
/* 8K */
|
||||
dma_xfer((uint *)0x2000,0x2000,(uint *)0);
|
||||
/* 16K */
|
||||
dma_xfer((uint *)0x4000,0x4000,(uint *)0);
|
||||
/* 32K */
|
||||
dma_xfer((uint *)0x8000,0x8000,(uint *)0);
|
||||
/* 64K */
|
||||
dma_xfer((uint *)0x10000,0x10000,(uint *)0);
|
||||
/* 128k */
|
||||
dma_xfer((uint *)0x20000,0x20000,(uint *)0);
|
||||
/* 256k */
|
||||
dma_xfer((uint *)0x40000,0x40000,(uint *)0);
|
||||
/* 512k */
|
||||
dma_xfer((uint *)0x80000,0x80000,(uint *)0);
|
||||
/* 1M */
|
||||
dma_xfer((uint *)0x100000,0x100000,(uint *)0);
|
||||
/* 2M */
|
||||
dma_xfer((uint *)0x200000,0x200000,(uint *)0);
|
||||
/* 4M */
|
||||
dma_xfer((uint *)0x400000,0x400000,(uint *)0);
|
||||
|
||||
for (i = 1; i < dram_size / 0x800000; i++) {
|
||||
dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
|
||||
}
|
||||
|
||||
/* Enable errors for ECC */
|
||||
ddr->err_disable = 0x00000000;
|
||||
asm("sync;isync;msync");
|
||||
}
|
||||
#endif
|
||||
|
||||
return dram_size;
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -403,6 +441,7 @@ int testdram (void)
|
|||
}
|
||||
#endif
|
||||
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
/*************************************************************************
|
||||
* fixed sdram init -- doesn't use serial presence detect.
|
||||
|
|
@ -434,6 +473,6 @@ long int fixed_sdram (void)
|
|||
asm("sync; isync; msync");
|
||||
udelay(500);
|
||||
#endif
|
||||
return ( CFG_SDRAM_SIZE * 1024 * 1024);
|
||||
return CFG_SDRAM_SIZE * 1024 * 1024;
|
||||
}
|
||||
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
||||
|
|
|
|||
|
|
@ -174,16 +174,6 @@ reset_85xx_watchdog(void)
|
|||
#endif /* CONFIG_WATCHDOG */
|
||||
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
__inline__ void dcbz(const void* addr)
|
||||
{
|
||||
__asm__ __volatile__ ("dcbz 0,%0" :: "r" (addr));
|
||||
}
|
||||
|
||||
__inline__ void dcbf(const void* addr)
|
||||
{
|
||||
__asm__ __volatile__ ("dcbf 0,%0" :: "r" (addr));
|
||||
}
|
||||
|
||||
void dma_init(void) {
|
||||
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
||||
volatile ccsr_dma_t *dma = &immap->im_dma;
|
||||
|
|
|
|||
|
|
@ -1,4 +1,5 @@
|
|||
/*
|
||||
* Copyright 2004 Freescale Semiconductor.
|
||||
* Copyright (C) 2003 Motorola Inc.
|
||||
* Xianghua Xiao (x.xiao@motorola.com)
|
||||
*
|
||||
|
|
@ -28,17 +29,23 @@
|
|||
#include <asm/cpm_85xx.h>
|
||||
#include <pci.h>
|
||||
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
|
||||
|
||||
/*
|
||||
* Initialize PCI Devices, report devices found.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_PCI_PNP
|
||||
static struct pci_config_table pci_mpc85xxads_config_table[] = {
|
||||
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_IDSEL_NUMBER, PCI_ANY_ID,
|
||||
pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
|
||||
PCI_ENET0_MEMADDR,
|
||||
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
|
||||
{ }
|
||||
{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
||||
PCI_IDSEL_NUMBER, PCI_ANY_ID,
|
||||
pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
|
||||
PCI_ENET0_MEMADDR,
|
||||
PCI_COMMAND_MEMORY |
|
||||
PCI_COMMAND_MASTER}},
|
||||
{}
|
||||
};
|
||||
#endif
|
||||
|
||||
|
|
@ -48,60 +55,61 @@ struct pci_controller local_hose = {
|
|||
#endif
|
||||
};
|
||||
|
||||
void pci_init_board(void)
|
||||
|
||||
void pci_init_board (void)
|
||||
{
|
||||
struct pci_controller* hose = (struct pci_controller *)&local_hose;
|
||||
volatile immap_t *immap = (immap_t *)CFG_CCSRBAR;
|
||||
volatile ccsr_pcix_t *pcix = &immap->im_pcix;
|
||||
struct pci_controller *hose = (struct pci_controller *) &local_hose;
|
||||
volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
|
||||
volatile ccsr_pcix_t *pcix = &immap->im_pcix;
|
||||
|
||||
u16 reg16;
|
||||
u16 reg16;
|
||||
|
||||
hose->first_busno = 0;
|
||||
hose->last_busno = 0xff;
|
||||
hose->first_busno = 0;
|
||||
hose->last_busno = 0xff;
|
||||
|
||||
pci_set_region(hose->regions + 0,
|
||||
CFG_PCI_MEM_BASE,
|
||||
CFG_PCI_MEM_PHYS,
|
||||
(CFG_PCI_MEM_SIZE/2),
|
||||
PCI_REGION_MEM);
|
||||
pci_set_region (hose->regions + 0,
|
||||
CFG_PCI1_MEM_BASE,
|
||||
CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
|
||||
|
||||
pci_set_region(hose->regions + 1,
|
||||
(CFG_PCI_MEM_BASE+0x08000000),
|
||||
(CFG_PCI_MEM_PHYS+0x08000000),
|
||||
0x1000000, /* 16M */
|
||||
PCI_REGION_IO);
|
||||
pci_set_region (hose->regions + 1,
|
||||
CFG_PCI1_IO_BASE,
|
||||
CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
|
||||
|
||||
hose->region_count = 2;
|
||||
hose->region_count = 2;
|
||||
|
||||
pci_setup_indirect(hose,
|
||||
(CFG_IMMR+0x8000),
|
||||
(CFG_IMMR+0x8004));
|
||||
pci_setup_indirect (hose, (CFG_IMMR + 0x8000), (CFG_IMMR + 0x8004));
|
||||
|
||||
pci_register_hose(hose);
|
||||
pci_read_config_word (PCI_BDF (0, 0, 0), PCI_COMMAND, ®16);
|
||||
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
||||
pci_write_config_word (PCI_BDF (0, 0, 0), PCI_COMMAND, reg16);
|
||||
|
||||
hose->last_busno = pci_hose_scan(hose);
|
||||
/*
|
||||
* Clear non-reserved bits in status register.
|
||||
*/
|
||||
pci_write_config_word (PCI_BDF (0, 0, 0), PCI_STATUS, 0xffff);
|
||||
pci_write_config_byte (PCI_BDF (0, 0, 0), PCI_LATENCY_TIMER, 0x80);
|
||||
|
||||
pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®16);
|
||||
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
||||
pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
|
||||
pcix->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
|
||||
pcix->potear1 = 0x00000000;
|
||||
pcix->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
|
||||
pcix->powbear1 = 0x00000000;
|
||||
pcix->powar1 = 0x8004401c; /* 512M MEM space */
|
||||
|
||||
/* Clear non-reserved bits in status register */
|
||||
pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
|
||||
pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);
|
||||
pcix->potar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
|
||||
pcix->potear2 = 0x00000000;
|
||||
pcix->powbar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
|
||||
pcix->powbear2 = 0x00000000;
|
||||
pcix->powar2 = 0x80088017; /* 16M IO space */
|
||||
|
||||
pcix->potar1 = (CFG_PCI_MEM_BASE >> 12) & 0x000fffff;
|
||||
pcix->potear1 = 0x00000000;
|
||||
pcix->powbar1 = (CFG_PCI_MEM_BASE >> 12) & 0x000fffff;
|
||||
pcix->powbear1 = 0x00000000;
|
||||
pcix->powar1 = 0x8004401a; /* 128M MEM space */
|
||||
pcix->potar2 = ((CFG_PCI_MEM_BASE + 0x08000000) >> 12) & 0x000fffff;
|
||||
pcix->potear2 = 0x00000000;
|
||||
pcix->powbar2 = ((CFG_PCI_MEM_BASE + 0x08000000) >> 12) && 0x000fffff;
|
||||
pcix->powbear2 = 0x00000000;
|
||||
pcix->powar2 = 0x80088017; /* 16M IO space */
|
||||
pcix->pitar1 = 0x00000000;
|
||||
pcix->piwbar1 = 0x00000000;
|
||||
pcix->piwar1 = 0xa0F5501f;
|
||||
pcix->pitar1 = 0x00000000;
|
||||
pcix->piwbar1 = 0x00000000;
|
||||
pcix->piwar1 = 0xa0F5501f;
|
||||
|
||||
/*
|
||||
* Hose scan.
|
||||
*/
|
||||
pci_register_hose (hose);
|
||||
hose->last_busno = pci_hose_scan (hose);
|
||||
}
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
|
|
|||
|
|
@ -130,7 +130,6 @@ _start_e500:
|
|||
/* disable d-cache */
|
||||
li r0,0x0
|
||||
mtspr L1CSR0,r0
|
||||
isync
|
||||
|
||||
/* invalidate i-cache */
|
||||
mfspr r0,L1CSR1
|
||||
|
|
@ -144,7 +143,6 @@ _start_e500:
|
|||
isync
|
||||
|
||||
/* clear registers */
|
||||
sync
|
||||
li r0,0
|
||||
mtspr SRR0,r0
|
||||
mtspr SRR1,r0
|
||||
|
|
@ -158,11 +156,8 @@ _start_e500:
|
|||
mtspr DEAR,r0
|
||||
|
||||
mtspr DBCR0,r0
|
||||
isync
|
||||
mtspr DBCR1,r0
|
||||
isync
|
||||
mtspr DBCR2,r0
|
||||
isync
|
||||
mtspr IAC1,r0
|
||||
mtspr IAC2,r0
|
||||
mtspr DAC1,r0
|
||||
|
|
@ -171,26 +166,13 @@ _start_e500:
|
|||
mfspr r1,DBSR
|
||||
mtspr DBSR,r1 /* Clear all valid bits */
|
||||
|
||||
isync
|
||||
mtspr PID0,r0
|
||||
isync
|
||||
mtspr PID1,r0
|
||||
isync
|
||||
mtspr PID2,r0
|
||||
isync
|
||||
|
||||
mtspr TCR,r0
|
||||
|
||||
mtspr BUCSR,r0 /* disable branch prediction */
|
||||
isync
|
||||
|
||||
mtspr HID0,r0
|
||||
isync
|
||||
mtspr HID1,r0
|
||||
isync
|
||||
|
||||
mtspr MAS4,r0
|
||||
isync
|
||||
mtspr MAS6,r0
|
||||
isync
|
||||
|
||||
|
|
@ -376,9 +358,9 @@ _start:
|
|||
isync
|
||||
|
||||
/* Enable Time Base and Select Time Base Clock */
|
||||
li r0,0x4000 /* time base is processor clock */
|
||||
lis r0,HID0_EMCP@h /* Enable machine check */
|
||||
ori r0,r0,0x4000 /* time base is processor clock */
|
||||
mtspr HID0,r0
|
||||
isync
|
||||
|
||||
#if defined(CONFIG_ADDR_STREAMING)
|
||||
li r0,0x3000
|
||||
|
|
@ -386,31 +368,26 @@ _start:
|
|||
li r0,0x1000
|
||||
#endif
|
||||
mtspr HID1,r0
|
||||
isync
|
||||
|
||||
/* Enable Branch Prediction */
|
||||
#if defined(CONFIG_BTB)
|
||||
li r0,0x201 /* BBFI = 1, BPEN = 1 */
|
||||
mtspr BUCSR,r0
|
||||
isync
|
||||
#endif
|
||||
|
||||
#if defined(CFG_INIT_DBCR)
|
||||
lis r1,0xffff
|
||||
ori r1,r1,0xffff
|
||||
mtspr dbsr,r1 /* Clear all status bits */
|
||||
mtspr DBSR,r1 /* Clear all status bits */
|
||||
lis r0,CFG_INIT_DBCR@h /* DBCR0[IDM] must be set */
|
||||
ori r0,r0,CFG_INIT_DBCR@l
|
||||
mtspr dbcr0,r0
|
||||
isync
|
||||
mtspr DBCR0,r0
|
||||
#endif
|
||||
|
||||
/* L1 DCache is used for initial RAM */
|
||||
mfspr r2, L1CSR0
|
||||
ori r2, r2, 0x0003
|
||||
oris r2, r2, 0x0001
|
||||
msync
|
||||
isync
|
||||
mtspr L1CSR0, r2 /* enable/invalidate L1 Dcache */
|
||||
isync
|
||||
|
||||
|
|
@ -457,8 +434,7 @@ in_flash:
|
|||
bl cpu_init_f
|
||||
bl icache_enable
|
||||
bl board_init_f
|
||||
sync
|
||||
|
||||
isync
|
||||
|
||||
/* --FIXME-- machine check with MCSRRn and rfmci */
|
||||
|
||||
|
|
@ -922,6 +898,18 @@ ppcDcbi:
|
|||
dcbi r0,r3
|
||||
blr
|
||||
|
||||
/*--------------------------------------------------------------------------
|
||||
* Function: ppcDcbz
|
||||
* Description: Data Cache block zero.
|
||||
* Input: r3 = effective address
|
||||
* Output: none.
|
||||
*-------------------------------------------------------------------------- */
|
||||
|
||||
.globl ppcDcbz
|
||||
ppcDcbz:
|
||||
dcbz r0,r3
|
||||
blr
|
||||
|
||||
/*------------------------------------------------------------------------------- */
|
||||
/* Function: ppcSync */
|
||||
/* Description: Processor Synchronize */
|
||||
|
|
|
|||
|
|
@ -15,7 +15,7 @@ http://ftp.gnu.org/gnu/binutils.
|
|||
shipped with your board. Then apply the following changes:
|
||||
SW3[1-6]="all OFF" (boot from 32bit flash, no boot sequence is used)
|
||||
SW10[2-6]="all OFF" (turn on CPM SCC for serial port,works for 8540/8560)
|
||||
SW11[2]='OFF for 8560, ON for 8540' (single switch to toggle 8540.8560 mode)
|
||||
SW11[2]='OFF for 8560, ON for 8540' (toggle 8540.8560 mode)
|
||||
SW11[7]='ON' (rev2), 'OFF' (rev1)
|
||||
SW4[7-8]="OFF OFF" (enable serial ports,I'm using the top serial connector)
|
||||
SW22[1-4]="OFF OFF ON OFF"
|
||||
|
|
@ -26,7 +26,8 @@ http://ftp.gnu.org/gnu/binutils.
|
|||
have to change the system clock from the default 66Mhz to 33Mhz by
|
||||
setting SW15[1]="OFF" and SW17[8]="OFF". After that you may also need
|
||||
double your platform clock(SW6) because the system clock is now only
|
||||
half of its original value.
|
||||
half of its original value. For example, if at 66MHz your system
|
||||
clock showed SW6[0:1] = 01, then at 33MHz SW6[0:1] it should be 10.
|
||||
|
||||
1.3 SW6 is a very important switch, it decides your platform clock and CPU
|
||||
clock based on the on-board system clock(default 66MHz). Check the
|
||||
|
|
@ -42,7 +43,7 @@ http://ftp.gnu.org/gnu/binutils.
|
|||
0x0000_0000 0x7fff_ffff DDR 2G
|
||||
0x8000_0000 0x9fff_ffff PCI MEM 512M
|
||||
0xc000_0000 0xdfff_ffff Rapid IO 512M
|
||||
0xe000_0000 0xe000_ffff CCSR 1M
|
||||
0xe000_0000 0xe00f_ffff CCSR 1M
|
||||
0xe200_0000 0xe2ff_ffff PCI IO 16M
|
||||
0xf000_0000 0xf7ff_ffff SDRAM 128M
|
||||
0xf800_0000 0xf80f_ffff BCSR 1M
|
||||
|
|
@ -56,11 +57,12 @@ http://ftp.gnu.org/gnu/binutils.
|
|||
arch/ppc/configs/mpc8540_ads_defconfig
|
||||
arch/ppc/configs/mpc8560_ads_defconfig
|
||||
|
||||
|
||||
3. DEFINITIONS AND COMPILATION
|
||||
|
||||
3.1 Explanation on NEW definitions in include/configs/MPC8540ADS.h and include/
|
||||
configs/MPC8560ADS.h
|
||||
3.1 Explanation on NEW definitions in:
|
||||
include/configs/MPC8540ADS.h
|
||||
include/configs/MPC8560ADS.h
|
||||
|
||||
CONFIG_BOOKE BOOKE(e.g. Motorola MPC85xx, IBM 440, etc)
|
||||
CONFIG_E500 BOOKE e500 family(Motorola)
|
||||
CONFIG_MPC85xx MPC8540,MPC8560 and their derivatives
|
||||
|
|
@ -69,49 +71,63 @@ http://ftp.gnu.org/gnu/binutils.
|
|||
CONFIG_MPC8540ADS MPC8540ADS board specific
|
||||
CONFIG_MPC8560ADS MPC8560ADS board specific
|
||||
CONFIG_TSEC_ENET Use on-chip 10/100/1000 ethernet for networking
|
||||
CONFIG_SPD_EEPROM Use SPD EEPROM for DDR auto configuration, you can also
|
||||
manual config the DDR after undef this definition.
|
||||
CONFIG_SPD_EEPROM Use SPD EEPROM for DDR auto configuration, you can
|
||||
also manual config the DDR after undef this
|
||||
definition.
|
||||
CONFIG_DDR_ECC only for ECC DDR module
|
||||
CONFIG_DDR_DLL DLL fix on some ADS boards needed for more stability.
|
||||
CONFIG_RAM_AS_FLASH after define this, you can load U-Boot into localbus
|
||||
SDRAM and treat localbus SDRAM as a flash. We use this
|
||||
memory based U-Boot before flash is working while Metrowerks
|
||||
and Windriver are still working on their flash/JTAG tools.
|
||||
if you can program the flash directly, undef this.
|
||||
Other than the above definitions, the rest in the config files are straightforward.
|
||||
CONFIG_DDR_DLL DLL fix on some ADS boards needed for more
|
||||
stability.
|
||||
CONFIG_RAM_AS_FLASH after define this, you can load U-Boot into
|
||||
localbus SDRAM and treat localbus SDRAM as a
|
||||
flash. We use this memory based U-Boot
|
||||
before flash is working while Metrowerks and
|
||||
Windriver are still working on their
|
||||
flash/JTAG tools. if you can program the
|
||||
flash directly, undef this.
|
||||
|
||||
Other than the above definitions, the rest in the config files are
|
||||
straightforward.
|
||||
|
||||
|
||||
3.2 Compilation
|
||||
export CROSS_COMPILE=your-cross-compile-prefix(assuming you're using BASH shell)
|
||||
cd u-boot
|
||||
make distclean
|
||||
make MPC8560ADS_config (or make MPC8540ADS_config)
|
||||
make
|
||||
|
||||
Assuming you're using BASH shell:
|
||||
|
||||
export CROSS_COMPILE=your-cross-compile-prefix
|
||||
cd u-boot
|
||||
make distclean
|
||||
make MPC8560ADS_config (or make MPC8540ADS_config)
|
||||
make
|
||||
|
||||
4. Notes:
|
||||
|
||||
4.1 When connecting with kermit, the following commands must be present.in
|
||||
your .kermrc file. These are especially important when booting as
|
||||
MPC8560, as the serial console will not work without them:
|
||||
your .kermrc file. These are especially important when booting as
|
||||
MPC8560, as the serial console will not work without them:
|
||||
|
||||
set speed 115200
|
||||
set carrier-watch off
|
||||
set handshake none
|
||||
set flow-control none
|
||||
robust
|
||||
set speed 115200
|
||||
set carrier-watch off
|
||||
set handshake none
|
||||
set flow-control none
|
||||
robust
|
||||
|
||||
4.2 Sometimes after U-Boot is up, the 'tftp' won't work well with TSEC ethernet. If that
|
||||
happens, you can try the following steps to make network work:
|
||||
MPC8560ADS>tftp 1000000 pImage
|
||||
(if it hangs, use Ctrl-C to quit)
|
||||
MPC8560ADS>nm fdf24524
|
||||
>0
|
||||
>1
|
||||
>. (to quit this memory operation)
|
||||
MPC8560ADS>tftp 1000000 pImage
|
||||
|
||||
4.3 If you're one of the early developers using the Rev1 8540/8560 chips, please use U-Boot
|
||||
1.0.0, as the newer silicon will only support Rev2 and future revisions of 8540/8560.
|
||||
4.2 Sometimes after U-Boot is up, the 'tftp' won't work well with TSEC
|
||||
ethernet. If that happens, you can try the following steps to make
|
||||
network work:
|
||||
|
||||
MPC8560ADS>tftp 1000000 pImage
|
||||
(if it hangs, use Ctrl-C to quit)
|
||||
MPC8560ADS>nm fdf24524
|
||||
>0
|
||||
>1
|
||||
>. (to quit this memory operation)
|
||||
MPC8560ADS>tftp 1000000 pImage
|
||||
|
||||
4.3 If you're one of the early developers using the Rev1 8540/8560 chips,
|
||||
please use U-Boot 1.0.0, as the newer silicon will only support Rev2
|
||||
and future revisions of 8540/8560.
|
||||
|
||||
|
||||
4.4 Reflash U-boot Image using U-boot
|
||||
|
||||
|
|
@ -121,8 +137,14 @@ robust
|
|||
=> cp.b 0 fff80000 80000
|
||||
|
||||
|
||||
5. Screen dump:
|
||||
4.5 Reflash U-Boot with a BDI-2000
|
||||
|
||||
BDI> erase 0xFFF80000 0x2000 0x40
|
||||
BDI> prog 0xfff80000 u-boot.bin.8560ads
|
||||
BDI> verify
|
||||
|
||||
|
||||
5. Screen dump:
|
||||
5.1 MPC8540ADS board
|
||||
U-Boot 1.0.0-pre (Oct 15 2003 - 13:40:33)
|
||||
|
||||
|
|
|
|||
|
|
@ -440,7 +440,9 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
|
|||
#define LAWAR_SIZE 0x0000003F
|
||||
|
||||
#define LAWAR_TRGT_IF_PCI 0x00000000
|
||||
#define LAWAR_TRGT_IF_PCI1 0x00000000
|
||||
#define LAWAR_TRGT_IF_PCIX 0x00000000
|
||||
#define LAWAR_TRGT_IF_PCI2 0x00100000
|
||||
#define LAWAR_TRGT_IF_LBC 0x00400000
|
||||
#define LAWAR_TRGT_IF_CCSR 0x00800000
|
||||
#define LAWAR_TRGT_IF_RIO 0x00c00000
|
||||
|
|
|
|||
|
|
@ -280,7 +280,6 @@
|
|||
#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */
|
||||
#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */
|
||||
#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */
|
||||
#define SPRN_SVR 0x11E /* System-On-Chip Version Register */
|
||||
#define SPRN_PVR 0x11F /* Processor Version Register */
|
||||
#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
|
||||
#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
|
||||
|
|
@ -297,6 +296,11 @@
|
|||
#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
|
||||
#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
|
||||
#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
|
||||
#ifdef CONFIG_BOOKE
|
||||
#define SPRN_SVR 0x3FF /* System Version Register */
|
||||
#else
|
||||
#define SPRN_SVR 0x11E /* System Version Register */
|
||||
#endif
|
||||
#define SPRN_TBHI 0x3DC /* Time Base High */
|
||||
#define SPRN_TBHU 0x3CC /* Time Base High User-mode */
|
||||
#define SPRN_TBLO 0x3DD /* Time Base Low */
|
||||
|
|
@ -511,6 +515,7 @@
|
|||
#define SPRG3 SPRN_SPRG3
|
||||
#define SRR0 SPRN_SRR0 /* Save and Restore Register 0 */
|
||||
#define SRR1 SPRN_SRR1 /* Save and Restore Register 1 */
|
||||
#define SVR SPRN_SVR /* System Version Register */
|
||||
#define TBRL SPRN_TBRL /* Time Base Read Lower Register */
|
||||
#define TBRU SPRN_TBRU /* Time Base Read Upper Register */
|
||||
#define TBWL SPRN_TBWL /* Time Base Write Lower Register */
|
||||
|
|
@ -731,8 +736,11 @@
|
|||
#define PVR_7400 0x000C0000
|
||||
#define PVR_7410 0x800C0000
|
||||
#define PVR_7450 0x80000000
|
||||
#define PVR_8540 0x80200010
|
||||
#define PVR_8560 0x80200010
|
||||
|
||||
#define PVR_85xx 0x80200000
|
||||
#define PVR_85xx_REV1 (PVR_85xx | 0x0010)
|
||||
#define PVR_85xx_REV2 (PVR_85xx | 0x0020)
|
||||
|
||||
|
||||
/*
|
||||
* For the 8xx processors, all of them report the same PVR family for
|
||||
|
|
@ -757,6 +765,33 @@
|
|||
#define PVR_8260_HIP7 0x80822011
|
||||
#define PVR_8260_HIP7R1 0x80822013
|
||||
|
||||
|
||||
/*
|
||||
* System Version Register
|
||||
*/
|
||||
|
||||
/* System Version Register (SVR) field extraction */
|
||||
|
||||
#define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */
|
||||
#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revison field */
|
||||
|
||||
#define SVR_FAM(svr) (((svr) >> 20) & 0xFFF) /* Family field */
|
||||
#define SVR_MEM(svr) (((svr) >> 16) & 0xF) /* Member field */
|
||||
|
||||
#define SVR_MAJ(svr) (((svr) >> 4) & 0xF) /* Major revision field*/
|
||||
#define SVR_MIN(svr) (((svr) >> 0) & 0xF) /* Minor revision field*/
|
||||
|
||||
|
||||
/*
|
||||
* SVR_VER() Version Values
|
||||
*/
|
||||
|
||||
#define SVR_8540 0x8030
|
||||
#define SVR_8560 0x8070
|
||||
#define SVR_8555 0x8079
|
||||
#define SVR_8541 0x807A
|
||||
|
||||
|
||||
/* I am just adding a single entry for 8260 boards. I think we may be
|
||||
* able to combine mbx, fads, rpxlite, bseip, and classic into a single
|
||||
* generic 8xx as well. The boards containing these processors are either
|
||||
|
|
|
|||
|
|
@ -342,7 +342,8 @@ void trap_init (ulong);
|
|||
defined (CONFIG_74xx_7xx) || \
|
||||
defined (CONFIG_74x) || \
|
||||
defined (CONFIG_75x) || \
|
||||
defined (CONFIG_74xx)
|
||||
defined (CONFIG_74xx) || \
|
||||
defined(CONFIG_MPC85xx)
|
||||
unsigned char in8(unsigned int);
|
||||
void out8(unsigned int, unsigned char);
|
||||
unsigned short in16(unsigned int);
|
||||
|
|
@ -356,6 +357,7 @@ void out32r(unsigned int, unsigned long value);
|
|||
void ppcDcbf(unsigned long value);
|
||||
void ppcDcbi(unsigned long value);
|
||||
void ppcSync(void);
|
||||
void ppcDcbz(unsigned long value);
|
||||
#endif
|
||||
|
||||
/* $(CPU)/cpu.c */
|
||||
|
|
|
|||
|
|
@ -1,4 +1,5 @@
|
|||
/*
|
||||
* Copyright 2004 Freescale Semiconductor.
|
||||
* (C) Copyright 2002,2003 Motorola,Inc.
|
||||
* Xianghua Xiao <X.Xiao@motorola.com>
|
||||
*
|
||||
|
|
@ -21,209 +22,346 @@
|
|||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/* mpc8540ads board configuration file */
|
||||
/* please refer to doc/README.mpc85xxads for more info */
|
||||
/* make sure you change the MAC address and other network params first,
|
||||
* search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
|
||||
/*
|
||||
* mpc8540ads board configuration file
|
||||
*
|
||||
* Please refer to doc/README.mpc85xx for more info.
|
||||
*
|
||||
* Make sure you change the MAC address and other network params first,
|
||||
* search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/* High Level Configuration Options */
|
||||
#define CONFIG_BOOKE 1 /* BOOKE */
|
||||
#define CONFIG_E500 1 /* BOOKE e500 family */
|
||||
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
|
||||
#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1 Chip */
|
||||
#define CONFIG_MPC8540 1 /* MPC8540 specific */
|
||||
#define CONFIG_MPC8540ADS 1 /* MPC8540ADS board specific*/
|
||||
#define CONFIG_BOOKE 1 /* BOOKE */
|
||||
#define CONFIG_E500 1 /* BOOKE e500 family */
|
||||
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
|
||||
#define CONFIG_MPC8540 1 /* MPC8540 specific */
|
||||
#define CONFIG_MPC8540ADS 1 /* MPC8540ADS board specific */
|
||||
|
||||
#undef CONFIG_PCI /* pci ethernet support */
|
||||
#define CONFIG_TSEC_ENET /* tsec ethernet support */
|
||||
#define CONFIG_PCI
|
||||
#define CONFIG_TSEC_ENET /* tsec ethernet support */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
||||
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
|
||||
#define CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
||||
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
|
||||
|
||||
#if defined(CONFIG_MPC85xx_REV1)
|
||||
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
||||
#endif
|
||||
|
||||
/* Using Localbus SDRAM to emulate flash before we can program the flash,
|
||||
* normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
|
||||
/*
|
||||
* Use Localbus SDRAM to emulate flash before we can program the flash.
|
||||
* Normally you need a flash-boot image(u-boot.bin).
|
||||
* If unsure #undef this.
|
||||
*/
|
||||
#undef CONFIG_RAM_AS_FLASH
|
||||
|
||||
#if !defined(CONFIG_PCI) /* some PCI card is 33Mhz only */
|
||||
#define CONFIG_SYS_CLK_FREQ 66000000 /* sysclk for MPC85xx */
|
||||
#else
|
||||
#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */
|
||||
/*
|
||||
* sysclk for MPC85xx
|
||||
*
|
||||
* Two valid values are:
|
||||
* 33000000
|
||||
* 66000000
|
||||
*
|
||||
* Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
|
||||
* is likely the desired value here. The board, however, can run and
|
||||
* defaults to 66Mhz. In any event, this value must match the settings
|
||||
* of SW15[1] and SW17[8], and likely SW6[0:1], the SYSCLK as well.
|
||||
*
|
||||
* SW17[8] ------+ SW6
|
||||
* SW15[1] ----+ | [0:1]
|
||||
* V V V V
|
||||
* 33MHz 1 1 1 0
|
||||
* 66MHz 0 0 0 1
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_CLK_FREQ 66000000
|
||||
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
#define CONFIG_DDR_SETTING /* manually set up DDR parameters */
|
||||
#endif
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM) /* manually set up DDR parameters */
|
||||
#define CONFIG_DDR_SETTING
|
||||
#endif
|
||||
/*
|
||||
* These can be toggled for performance analysis, otherwise use default.
|
||||
*/
|
||||
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
||||
#define CONFIG_BTB /* toggle branch predition */
|
||||
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
|
||||
|
||||
/* below can be toggled for performance analysis. otherwise use default */
|
||||
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
||||
#undef CONFIG_BTB /* toggle branch predition */
|
||||
#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
|
||||
|
||||
#undef CFG_DRAM_TEST /* memory test, takes time */
|
||||
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
|
||||
#undef CFG_DRAM_TEST /* memory test, takes time */
|
||||
#define CFG_MEMTEST_START 0x00200000 /* memtest region */
|
||||
#define CFG_MEMTEST_END 0x00400000
|
||||
|
||||
#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET)
|
||||
#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both."
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Base addresses -- Note these are effective addresses where the
|
||||
* actual resources get mapped (not physical addresses)
|
||||
*/
|
||||
#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
|
||||
#define CFG_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */
|
||||
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
|
||||
#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
|
||||
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
|
||||
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
|
||||
|
||||
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
|
||||
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
|
||||
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
|
||||
#define CFG_SDRAM_SIZE 128 /* DDR is now 128MB */
|
||||
#define CFG_SDRAM_SIZE 128 /* DDR is 128MB */
|
||||
|
||||
/*
|
||||
* SDRAM on the Local Bus
|
||||
*/
|
||||
#if defined(CONFIG_RAM_AS_FLASH)
|
||||
#define CFG_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */
|
||||
#else
|
||||
#define CFG_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */
|
||||
#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
|
||||
#endif
|
||||
#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
|
||||
#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
|
||||
|
||||
#if defined(CONFIG_RAM_AS_FLASH)
|
||||
#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 16M */
|
||||
#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 16M */
|
||||
#define CFG_BR0_PRELIM 0xf8001801 /* port size 32bit */
|
||||
#else /* Boot from real Flash */
|
||||
#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */
|
||||
#define CFG_BR0_PRELIM 0xff001801 /* port size 32bit */
|
||||
#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */
|
||||
#define CFG_BR0_PRELIM 0xff001801 /* port size 32bit */
|
||||
#endif
|
||||
|
||||
#define CFG_OR0_PRELIM 0xff006ff7 /* 16MB Flash */
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CFG_MAX_FLASH_SECT 64 /* sectors per device */
|
||||
#define CFG_OR0_PRELIM 0xff006ff7 /* 16MB Flash */
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CFG_MAX_FLASH_SECT 64 /* sectors per device */
|
||||
#undef CFG_FLASH_CHECKSUM
|
||||
#define CFG_FLASH_ERASE_TOUT 60000 /* Timeout for Flash Erase (in ms)*/
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms)*/
|
||||
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
||||
|
||||
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
|
||||
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
|
||||
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
||||
#define CFG_RAMBOOT
|
||||
#else
|
||||
#undef CFG_RAMBOOT
|
||||
#undef CFG_RAMBOOT
|
||||
#endif
|
||||
|
||||
#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
|
||||
|
||||
#if defined(CONFIG_DDR_SETTING)
|
||||
#define CFG_DDR_CS0_BNDS 0x00000007 /* 0-128MB */
|
||||
#define CFG_DDR_CS0_CONFIG 0x80000002
|
||||
#define CFG_DDR_TIMING_1 0x37344321
|
||||
#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning*/
|
||||
#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR*/
|
||||
#define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
|
||||
#define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page*/
|
||||
#endif
|
||||
|
||||
#undef CONFIG_CLOCKS_IN_MHZ
|
||||
|
||||
/* local bus definitions */
|
||||
#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */
|
||||
#if defined(CONFIG_DDR_SETTING)
|
||||
#define CFG_DDR_CS0_BNDS 0x00000007 /* 0-128MB */
|
||||
#define CFG_DDR_CS0_CONFIG 0x80000002
|
||||
#define CFG_DDR_TIMING_1 0x37344321
|
||||
#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
|
||||
#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
|
||||
#define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
|
||||
#define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page */
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* Local Bus Definitions
|
||||
*/
|
||||
|
||||
/*
|
||||
* Base Register 2 and Option Register 2 configure SDRAM.
|
||||
* The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
|
||||
*
|
||||
* For BR2, need:
|
||||
* Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
|
||||
* port-size = 32-bits = BR2[19:20] = 11
|
||||
* no parity checking = BR2[21:22] = 00
|
||||
* SDRAM for MSEL = BR2[24:26] = 011
|
||||
* Valid = BR[31] = 1
|
||||
*
|
||||
* 0 4 8 12 16 20 24 28
|
||||
* 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
|
||||
*
|
||||
* FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
|
||||
* FIXME: the top 17 bits of BR2.
|
||||
*/
|
||||
|
||||
#define CFG_BR2_PRELIM 0xf0001861
|
||||
|
||||
/*
|
||||
* The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
|
||||
*
|
||||
* For OR2, need:
|
||||
* 64MB mask for AM, OR2[0:7] = 1111 1100
|
||||
* XAM, OR2[17:18] = 11
|
||||
* 9 columns OR2[19-21] = 010
|
||||
* 13 rows OR2[23-25] = 100
|
||||
* EAD set for extra time OR[31] = 1
|
||||
*
|
||||
* 0 4 8 12 16 20 24 28
|
||||
* 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
|
||||
*/
|
||||
|
||||
#define CFG_OR2_PRELIM 0xfc006901
|
||||
#define CFG_LBC_LCRR 0x00030004 /* local bus freq divider*/
|
||||
#define CFG_LBC_LBCR 0x00000000
|
||||
#define CFG_LBC_LSRT 0x20000000
|
||||
#define CFG_LBC_MRTPR 0x20000000
|
||||
#define CFG_LBC_LSDMR_1 0x2861b723
|
||||
#define CFG_LBC_LSDMR_2 0x0861b723
|
||||
#define CFG_LBC_LSDMR_3 0x0861b723
|
||||
#define CFG_LBC_LSDMR_4 0x1861b723
|
||||
#define CFG_LBC_LSDMR_5 0x4061b723
|
||||
|
||||
#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
|
||||
#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
|
||||
#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
|
||||
#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/
|
||||
|
||||
/*
|
||||
* LSDMR masks
|
||||
*/
|
||||
#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
|
||||
#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
|
||||
#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
|
||||
#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16))
|
||||
#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
|
||||
#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19))
|
||||
#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
|
||||
#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22))
|
||||
#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
|
||||
#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
|
||||
#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
|
||||
#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27))
|
||||
#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
|
||||
#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29))
|
||||
#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
|
||||
|
||||
#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
|
||||
|
||||
#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_BSMA1516 \
|
||||
| CFG_LBC_LSDMR_RFCR5 \
|
||||
| CFG_LBC_LSDMR_PRETOACT3 \
|
||||
| CFG_LBC_LSDMR_ACTTORW3 \
|
||||
| CFG_LBC_LSDMR_BL8 \
|
||||
| CFG_LBC_LSDMR_WRC2 \
|
||||
| CFG_LBC_LSDMR_CL3 \
|
||||
| CFG_LBC_LSDMR_RFEN \
|
||||
)
|
||||
|
||||
/*
|
||||
* SDRAM Controller configuration sequence.
|
||||
*/
|
||||
#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
|
||||
| CFG_LBC_LSDMR_OP_PCHALL) /*0x2861b723*/
|
||||
#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
|
||||
| CFG_LBC_LSDMR_OP_ARFRSH) /*0x0861b723*/
|
||||
#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
|
||||
| CFG_LBC_LSDMR_OP_ARFRSH) /*0x0861b723*/
|
||||
#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
|
||||
| CFG_LBC_LSDMR_OP_MRW) /*0x1861b723*/
|
||||
#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
|
||||
| CFG_LBC_LSDMR_OP_NORMAL) /*0x4061b723*/
|
||||
|
||||
|
||||
#if defined(CONFIG_RAM_AS_FLASH)
|
||||
#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */
|
||||
#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */
|
||||
#else
|
||||
#define CFG_BR4_PRELIM 0xfc000801 /* 32KB, 8-bit wide for ADS config reg */
|
||||
#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */
|
||||
#endif
|
||||
#define CFG_OR4_PRELIM 0xffffe1f1
|
||||
#define CFG_BCSR (CFG_BR4_PRELIM & 0xffff8000)
|
||||
|
||||
#define CONFIG_L1_INIT_RAM
|
||||
#define CFG_INIT_RAM_LOCK 1
|
||||
#define CFG_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */
|
||||
#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
|
||||
#define CFG_INIT_RAM_LOCK 1
|
||||
#define CFG_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */
|
||||
#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
|
||||
|
||||
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
||||
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
||||
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
||||
|
||||
/* Serial Port */
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
||||
#define CFG_NS16550
|
||||
#define CFG_NS16550_SERIAL
|
||||
#define CFG_NS16550_REG_SIZE 1
|
||||
#define CFG_NS16550_REG_SIZE 1
|
||||
#define CFG_NS16550_CLK get_bus_freq(0)
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CFG_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
|
||||
|
||||
#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
|
||||
#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
|
||||
#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
|
||||
#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
|
||||
|
||||
/* Use the HUSH parser */
|
||||
#define CFG_HUSH_PARSER
|
||||
#ifdef CFG_HUSH_PARSER
|
||||
#ifdef CFG_HUSH_PARSER
|
||||
#define CFG_PROMPT_HUSH_PS2 "> "
|
||||
#endif
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_HARD_I2C /* I2C with hardware support*/
|
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CONFIG_HARD_I2C /* I2C with hardware support*/
|
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CFG_I2C_SLAVE 0x7F
|
||||
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
|
||||
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
|
||||
|
||||
/* RapidIO MMU */
|
||||
#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
|
||||
#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
|
||||
#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */
|
||||
|
||||
/*
|
||||
* General PCI
|
||||
* Addresses are mapped 1-1.
|
||||
*/
|
||||
#define CFG_PCI1_MEM_BASE 0x80000000
|
||||
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
|
||||
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
|
||||
#define CFG_PCI1_IO_BASE 0xe2000000
|
||||
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
|
||||
#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
|
||||
|
||||
/* General PCI */
|
||||
#define CFG_PCI_MEM_BASE 0xe0000000
|
||||
#define CFG_PCI_MEM_PHYS 0xe0000000
|
||||
#define CFG_PCI_MEM_SIZE 0x10000000
|
||||
#if defined(CONFIG_PCI)
|
||||
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
|
||||
#undef CONFIG_EEPRO100
|
||||
#define CONFIG_TULIP
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
#if !defined(CONFIG_PCI_PNP)
|
||||
#define PCI_ENET0_IOADDR 0xe0000000
|
||||
#define PCI_ENET0_MEMADDR 0xe0000000
|
||||
#define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
|
||||
#endif
|
||||
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
|
||||
#if defined(CONFIG_MPC85xx_REV1) /* Errata PCI 8 */
|
||||
#define CFG_PCI_SUBSYS_DEVICEID 0x0003
|
||||
#else
|
||||
#define CFG_PCI_SUBSYS_DEVICEID 0x0008
|
||||
#endif
|
||||
#elif defined(CONFIG_TSEC_ENET)
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#define CONFIG_PHY_M88E1011 1 /* GigaBit Ether PHY */
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_PHY_ADDR 8 /* PHY address */
|
||||
#undef CONFIG_TULIP
|
||||
|
||||
#if !defined(CONFIG_PCI_PNP)
|
||||
#define PCI_ENET0_IOADDR 0xe0000000
|
||||
#define PCI_ENET0_MEMADDR 0xe0000000
|
||||
#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
|
||||
#endif
|
||||
|
||||
/* Environment */
|
||||
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
|
||||
#if defined(CONFIG_TSEC_ENET)
|
||||
|
||||
#ifndef CONFIG_NET_MULTI
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#endif
|
||||
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_MPC85XX_TSEC1 1
|
||||
#define CONFIG_MPC85XX_TSEC2 1
|
||||
#define CONFIG_MPC85XX_FEC 1
|
||||
#define TSEC1_PHY_ADDR 0
|
||||
#define TSEC2_PHY_ADDR 1
|
||||
#define FEC_PHY_ADDR 3
|
||||
#define TSEC1_PHYIDX 0
|
||||
#define TSEC2_PHYIDX 0
|
||||
#define FEC_PHYIDX 0
|
||||
#define CONFIG_ETHPRIME "MOTO ENET0"
|
||||
|
||||
#endif /* CONFIG_TSEC_ENET */
|
||||
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
#ifndef CFG_RAMBOOT
|
||||
#if defined(CONFIG_RAM_AS_FLASH)
|
||||
#define CFG_ENV_IS_NOWHERE
|
||||
|
|
@ -232,72 +370,83 @@
|
|||
#else
|
||||
#define CFG_ENV_IS_IN_FLASH 1
|
||||
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
|
||||
#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
|
||||
#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
|
||||
#endif
|
||||
#define CFG_ENV_SIZE 0x2000
|
||||
#else
|
||||
#define CFG_NO_FLASH 1 /* Flash is not usable now */
|
||||
#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||||
#define CFG_NO_FLASH 1 /* Flash is not usable now */
|
||||
#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||||
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
|
||||
#define CFG_ENV_SIZE 0x2000
|
||||
#endif
|
||||
|
||||
#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8540ads-003:eth0:off console=ttyS0,115200"
|
||||
/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/
|
||||
#define CONFIG_BOOTCOMMAND "bootm 0xff300000 0xff700000"
|
||||
#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
|
||||
#if defined(CONFIG_PCI)
|
||||
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_PCI | CFG_CMD_I2C ) & \
|
||||
~(CFG_CMD_ENV | CFG_CMD_LOADS ))
|
||||
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_PCI \
|
||||
| CFG_CMD_I2C) \
|
||||
& \
|
||||
~(CFG_CMD_ENV \
|
||||
| CFG_CMD_LOADS))
|
||||
#else
|
||||
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) & \
|
||||
~(CFG_CMD_ENV | \
|
||||
CFG_CMD_LOADS ))
|
||||
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_I2C) \
|
||||
& \
|
||||
~(CFG_CMD_ENV \
|
||||
| CFG_CMD_LOADS))
|
||||
#endif
|
||||
#else
|
||||
#if defined(CONFIG_PCI)
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_PING | CFG_CMD_I2C )
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
|
||||
| CFG_CMD_PCI \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_I2C)
|
||||
#else
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C )
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_I2C)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "MPC8540ADS=> " /* Monitor Command Prompt */
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CFG_LOAD_ADDR 0x1000000 /* default load address */
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
|
||||
|
||||
/* Cache Configuration */
|
||||
#define CFG_DCACHE_SIZE 32768
|
||||
#define CFG_DCACHE_SIZE 32768
|
||||
#define CFG_CACHELINE_SIZE 32
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
||||
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
|
||||
#endif
|
||||
|
||||
/*
|
||||
|
|
@ -306,26 +455,62 @@
|
|||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||||
#endif
|
||||
|
||||
/* NOTE: change below for your network setting!!! */
|
||||
/*****************************/
|
||||
/* Environment Configuration */
|
||||
/*****************************/
|
||||
|
||||
/* The mac addresses for all ethernet interface */
|
||||
#if defined(CONFIG_TSEC_ENET)
|
||||
#define CONFIG_ETHADDR 00:01:af:07:9b:8a
|
||||
#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
|
||||
#define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
|
||||
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
|
||||
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
|
||||
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
|
||||
#endif
|
||||
|
||||
#define CONFIG_SERVERIP 163.12.64.52
|
||||
#define CONFIG_IPADDR 10.82.0.105
|
||||
#define CONFIG_GATEWAYIP 10.82.1.254
|
||||
#define CONFIG_NETMASK 255.255.254.0
|
||||
#define CONFIG_HOSTNAME MPC8560ADS_PILOT_003
|
||||
#define CONFIG_ROOTPATH /home/r6aads/mpclinux/eldk-2.0.2/ppc_82xx
|
||||
#define CONFIG_BOOTFILE pImage
|
||||
#define CONFIG_IPADDR 192.168.1.253
|
||||
|
||||
#define CONFIG_HOSTNAME unknown
|
||||
#define CONFIG_ROOTPATH /nfsroot
|
||||
#define CONFIG_BOOTFILE your.uImage
|
||||
|
||||
#define CONFIG_SERVERIP 192.168.1.1
|
||||
#define CONFIG_GATEWAYIP 192.168.1.1
|
||||
#define CONFIG_NETMASK 255.255.255.0
|
||||
|
||||
#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
|
||||
|
||||
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
|
||||
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=400000\0" \
|
||||
"ramdiskfile=your.ramdisk.u-boot\0"
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"bootm $loadaddr"
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
|
|||
|
|
@ -1,4 +1,5 @@
|
|||
/*
|
||||
* Copyright 2004 Freescale Semiconductor.
|
||||
* (C) Copyright 2002,2003 Motorola,Inc.
|
||||
* Xianghua Xiao <X.Xiao@motorola.com>
|
||||
*
|
||||
|
|
@ -21,226 +22,363 @@
|
|||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/* mpc8560ads board configuration file */
|
||||
/* please refer to doc/README.mpc85xx for more info */
|
||||
/* make sure you change the MAC address and other network params first,
|
||||
* search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
|
||||
/*
|
||||
* mpc8560ads board configuration file
|
||||
*
|
||||
* Please refer to doc/README.mpc85xx for more info.
|
||||
*
|
||||
* Make sure you change the MAC address and other network params first,
|
||||
* search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/* High Level Configuration Options */
|
||||
#define CONFIG_BOOKE 1 /* BOOKE */
|
||||
#define CONFIG_E500 1 /* BOOKE e500 family */
|
||||
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
|
||||
#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */
|
||||
#define CONFIG_MPC8560 1 /* MPC8560 specific */
|
||||
#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */
|
||||
#define CONFIG_BOOKE 1 /* BOOKE */
|
||||
#define CONFIG_E500 1 /* BOOKE e500 family */
|
||||
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
|
||||
#define CONFIG_MPC8560 1 /* MPC8560 specific */
|
||||
#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */
|
||||
|
||||
#undef CONFIG_PCI /* pci ethernet support */
|
||||
#define CONFIG_TSEC_ENET /* tsec ethernet support */
|
||||
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
|
||||
#define CONFIG_PCI
|
||||
#define CONFIG_TSEC_ENET /* tsec ethernet support */
|
||||
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
||||
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
|
||||
#define CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
||||
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
|
||||
|
||||
#if defined(CONFIG_MPC85xx_REV1)
|
||||
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
||||
#endif
|
||||
|
||||
/* Using Localbus SDRAM to emulate flash before we can program the flash,
|
||||
* normally you need a flash-boot image(u-boot.bin), if so undef this.
|
||||
/*
|
||||
* Use Localbus SDRAM to emulate flash before we can program the flash.
|
||||
* Normally you need a flash-boot image(u-boot.bin).
|
||||
* If unsure #undef this.
|
||||
*/
|
||||
#undef CONFIG_RAM_AS_FLASH
|
||||
|
||||
#if !defined(CONFIG_PCI) /* some PCI card is 33Mhz only */
|
||||
#define CONFIG_SYS_CLK_FREQ 66000000/* sysclk for MPC85xx */
|
||||
#else
|
||||
#define CONFIG_SYS_CLK_FREQ 33000000/* most pci cards are 33Mhz */
|
||||
/*
|
||||
* sysclk for MPC85xx
|
||||
*
|
||||
* Two valid values are:
|
||||
* 33000000
|
||||
* 66000000
|
||||
*
|
||||
* Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
|
||||
* is likely the desired value here. The board, however, can run and
|
||||
* defaults to 66Mhz. In any event, this value must match the settings
|
||||
* of SW15[1] and SW17[8], and likely SW6[0:1], the SYSCLK as well.
|
||||
*
|
||||
* SW17[8] ------+ SW6
|
||||
* SW15[1] ----+ | [0:1]
|
||||
* V V V V
|
||||
* 33MHz 1 1 1 0
|
||||
* 66MHz 0 0 0 1
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_CLK_FREQ 66000000
|
||||
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
#define CONFIG_DDR_SETTING /* manually set up DDR parameters */
|
||||
#endif
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM) /* manually set up DDR parameters */
|
||||
#define CONFIG_DDR_SETTING
|
||||
#endif
|
||||
/*
|
||||
* These can be toggled for performance analysis, otherwise use default.
|
||||
*/
|
||||
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
||||
#define CONFIG_BTB /* toggle branch predition */
|
||||
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
|
||||
|
||||
/* below can be toggled for performance analysis. otherwise use default */
|
||||
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
||||
#undef CONFIG_BTB /* toggle branch predition */
|
||||
#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
|
||||
#define CFG_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */
|
||||
|
||||
#undef CFG_DRAM_TEST /* memory test, takes time */
|
||||
#define CFG_MEMTEST_START 0x00200000 /* memtest region */
|
||||
#undef CFG_DRAM_TEST /* memory test, takes time */
|
||||
#define CFG_MEMTEST_START 0x00200000 /* memtest region */
|
||||
#define CFG_MEMTEST_END 0x00400000
|
||||
|
||||
#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
|
||||
defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
|
||||
defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
|
||||
#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Base addresses -- Note these are effective addresses where the
|
||||
* actual resources get mapped (not physical addresses)
|
||||
*/
|
||||
#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
|
||||
#define CFG_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */
|
||||
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
|
||||
#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
|
||||
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
|
||||
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
|
||||
|
||||
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
|
||||
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
|
||||
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
|
||||
#define CFG_SDRAM_SIZE 128 /* DDR is 128MB */
|
||||
#define CFG_SDRAM_SIZE 128 /* DDR is 128MB */
|
||||
|
||||
/*
|
||||
* SDRAM on the Local Bus
|
||||
*/
|
||||
#if defined(CONFIG_RAM_AS_FLASH)
|
||||
#define CFG_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */
|
||||
#else
|
||||
#define CFG_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */
|
||||
#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
|
||||
#endif
|
||||
#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
|
||||
#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
|
||||
|
||||
#if defined(CONFIG_RAM_AS_FLASH)
|
||||
#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 16M */
|
||||
#define CFG_BR0_PRELIM 0xf8001801 /* port size 32bit */
|
||||
#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 16M */
|
||||
#define CFG_BR0_PRELIM 0xf8001801 /* port size 32bit */
|
||||
#else /* Boot from real Flash */
|
||||
#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */
|
||||
#define CFG_BR0_PRELIM 0xff001801 /* port size 32bit */
|
||||
#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */
|
||||
#define CFG_BR0_PRELIM 0xff001801 /* port size 32bit */
|
||||
#endif
|
||||
|
||||
#define CFG_OR0_PRELIM 0xff006ff7 /* 16MB Flash */
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CFG_MAX_FLASH_SECT 64 /* sectors per device */
|
||||
#define CFG_OR0_PRELIM 0xff006ff7 /* 16MB Flash */
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CFG_MAX_FLASH_SECT 64 /* sectors per device */
|
||||
#undef CFG_FLASH_CHECKSUM
|
||||
#define CFG_FLASH_ERASE_TOUT 60000 /* Timeout for Flash Erase (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
||||
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
||||
|
||||
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
|
||||
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
|
||||
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
||||
#define CFG_RAMBOOT
|
||||
#else
|
||||
#undef CFG_RAMBOOT
|
||||
#undef CFG_RAMBOOT
|
||||
#endif
|
||||
|
||||
#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
|
||||
#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
|
||||
|
||||
#undef CONFIG_CLOCKS_IN_MHZ
|
||||
|
||||
#if defined(CONFIG_DDR_SETTING)
|
||||
#define CFG_DDR_CS0_BNDS 0x00000007 /* 0-128MB */
|
||||
#define CFG_DDR_CS0_CONFIG 0x80000002
|
||||
#define CFG_DDR_TIMING_1 0x37344321
|
||||
#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning*/
|
||||
#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR*/
|
||||
#define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
|
||||
#define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page*/
|
||||
#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
|
||||
#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
|
||||
#define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
|
||||
#define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page */
|
||||
#endif
|
||||
|
||||
#undef CONFIG_CLOCKS_IN_MHZ
|
||||
|
||||
/* local bus definitions */
|
||||
#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */
|
||||
/*
|
||||
* Local Bus Definitions
|
||||
*/
|
||||
|
||||
/*
|
||||
* Base Register 2 and Option Register 2 configure SDRAM.
|
||||
* The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
|
||||
*
|
||||
* For BR2, need:
|
||||
* Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
|
||||
* port-size = 32-bits = BR2[19:20] = 11
|
||||
* no parity checking = BR2[21:22] = 00
|
||||
* SDRAM for MSEL = BR2[24:26] = 011
|
||||
* Valid = BR[31] = 1
|
||||
*
|
||||
* 0 4 8 12 16 20 24 28
|
||||
* 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
|
||||
*
|
||||
* FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
|
||||
* FIXME: the top 17 bits of BR2.
|
||||
*/
|
||||
|
||||
#define CFG_BR2_PRELIM 0xf0001861
|
||||
|
||||
/*
|
||||
* The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
|
||||
*
|
||||
* For OR2, need:
|
||||
* 64MB mask for AM, OR2[0:7] = 1111 1100
|
||||
* XAM, OR2[17:18] = 11
|
||||
* 9 columns OR2[19-21] = 010
|
||||
* 13 rows OR2[23-25] = 100
|
||||
* EAD set for extra time OR[31] = 1
|
||||
*
|
||||
* 0 4 8 12 16 20 24 28
|
||||
* 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
|
||||
*/
|
||||
|
||||
#define CFG_OR2_PRELIM 0xfc006901
|
||||
#define CFG_LBC_LCRR 0x00030004 /* local bus freq */
|
||||
#define CFG_LBC_LBCR 0x00000000
|
||||
#define CFG_LBC_LSRT 0x20000000
|
||||
#define CFG_LBC_MRTPR 0x20000000
|
||||
#define CFG_LBC_LSDMR_1 0x2861b723
|
||||
#define CFG_LBC_LSDMR_2 0x0861b723
|
||||
#define CFG_LBC_LSDMR_3 0x0861b723
|
||||
#define CFG_LBC_LSDMR_4 0x1861b723
|
||||
#define CFG_LBC_LSDMR_5 0x4061b723
|
||||
|
||||
#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
|
||||
#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
|
||||
#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
|
||||
#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/
|
||||
|
||||
/*
|
||||
* LSDMR masks
|
||||
*/
|
||||
#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
|
||||
#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
|
||||
#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
|
||||
#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16))
|
||||
#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
|
||||
#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19))
|
||||
#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
|
||||
#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22))
|
||||
#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
|
||||
#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
|
||||
#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
|
||||
#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27))
|
||||
#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
|
||||
#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29))
|
||||
#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
|
||||
|
||||
#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
|
||||
#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
|
||||
|
||||
#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_BSMA1516 \
|
||||
| CFG_LBC_LSDMR_RFCR5 \
|
||||
| CFG_LBC_LSDMR_PRETOACT3 \
|
||||
| CFG_LBC_LSDMR_ACTTORW3 \
|
||||
| CFG_LBC_LSDMR_BL8 \
|
||||
| CFG_LBC_LSDMR_WRC2 \
|
||||
| CFG_LBC_LSDMR_CL3 \
|
||||
| CFG_LBC_LSDMR_RFEN \
|
||||
)
|
||||
|
||||
/*
|
||||
* SDRAM Controller configuration sequence.
|
||||
*/
|
||||
#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
|
||||
| CFG_LBC_LSDMR_OP_PCHALL) /*0x2861b723*/
|
||||
#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
|
||||
| CFG_LBC_LSDMR_OP_ARFRSH) /*0x0861b723*/
|
||||
#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
|
||||
| CFG_LBC_LSDMR_OP_ARFRSH) /*0x0861b723*/
|
||||
#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
|
||||
| CFG_LBC_LSDMR_OP_MRW) /*0x1861b723*/
|
||||
#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
|
||||
| CFG_LBC_LSDMR_OP_NORMAL) /*0x4061b723*/
|
||||
|
||||
|
||||
#if defined(CONFIG_RAM_AS_FLASH)
|
||||
#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */
|
||||
#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */
|
||||
#else
|
||||
#define CFG_BR4_PRELIM 0xfc000801 /* 32KB, 8-bit wide for ADS config reg */
|
||||
#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */
|
||||
#endif
|
||||
#define CFG_OR4_PRELIM 0xffffe1f1
|
||||
#define CFG_BCSR (CFG_BR4_PRELIM & 0xffff8000)
|
||||
|
||||
#define CONFIG_L1_INIT_RAM
|
||||
#define CFG_INIT_RAM_LOCK 1
|
||||
#define CFG_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */
|
||||
#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
|
||||
#define CFG_INIT_RAM_LOCK 1
|
||||
#define CFG_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */
|
||||
#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
|
||||
|
||||
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
||||
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
||||
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
||||
|
||||
/* Serial Port */
|
||||
#define CONFIG_CONS_ON_SCC /* define if console on SCC */
|
||||
#undef CONFIG_CONS_NONE /* define if console on something else */
|
||||
#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
|
||||
#define CONFIG_CONS_ON_SCC /* define if console on SCC */
|
||||
#undef CONFIG_CONS_NONE /* define if console on something else */
|
||||
#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CFG_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
|
||||
|
||||
/* Use the HUSH parser */
|
||||
#define CFG_HUSH_PARSER
|
||||
#ifdef CFG_HUSH_PARSER
|
||||
#ifdef CFG_HUSH_PARSER
|
||||
#define CFG_PROMPT_HUSH_PS2 "> "
|
||||
#endif
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_HARD_I2C /* I2C with hardware support*/
|
||||
#define CONFIG_HARD_I2C /* I2C with hardware support*/
|
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CFG_I2C_SLAVE 0x7F
|
||||
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
|
||||
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
|
||||
|
||||
#define CFG_PCI_MEM_BASE 0xe0000000
|
||||
#define CFG_PCI_MEM_PHYS 0xe0000000
|
||||
#define CFG_PCI_MEM_SIZE 0x10000000
|
||||
/* RapidIO MMU */
|
||||
#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
|
||||
#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
|
||||
#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */
|
||||
|
||||
/*
|
||||
* General PCI
|
||||
* Addresses are mapped 1-1.
|
||||
*/
|
||||
#define CFG_PCI1_MEM_BASE 0x80000000
|
||||
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
|
||||
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
|
||||
#define CFG_PCI1_IO_BASE 0xe2000000
|
||||
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
|
||||
#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
|
||||
#if defined(CONFIG_PCI) /* PCI Ethernet card */
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_EEPRO100
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
|
||||
#undef CONFIG_EEPRO100
|
||||
#undef CONFIG_TULIP
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
#if !defined(CONFIG_PCI_PNP)
|
||||
#define PCI_ENET0_IOADDR 0xe0000000
|
||||
#define PCI_ENET0_MEMADDR 0xe0000000
|
||||
#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
|
||||
#endif
|
||||
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
|
||||
#if defined(CONFIG_MPC85xx_REV1) /* Errata PCI 7 */
|
||||
#define CFG_PCI_SUBSYS_DEVICEID 0x0003
|
||||
#else
|
||||
#define CFG_PCI_SUBSYS_DEVICEID 0x0009
|
||||
|
||||
#if !defined(CONFIG_PCI_PNP)
|
||||
#define PCI_ENET0_IOADDR 0xe0000000
|
||||
#define PCI_ENET0_MEMADDR 0xe0000000
|
||||
#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
|
||||
#endif
|
||||
#elif defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#define CONFIG_PHY_M88E1011 1 /* GigaBit Ether PHY */
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_PHY_ADDR 8 /* PHY address */
|
||||
|
||||
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
|
||||
#if defined(CONFIG_TSEC_ENET)
|
||||
|
||||
#ifndef CONFIG_NET_MULTI
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#endif
|
||||
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_MPC85XX_TSEC1 1
|
||||
#define CONFIG_MPC85XX_TSEC2 1
|
||||
#undef CONFIG_MPC85XX_FEC
|
||||
#define TSEC1_PHY_ADDR 0
|
||||
#define TSEC2_PHY_ADDR 1
|
||||
#define TSEC1_PHYIDX 0
|
||||
#define TSEC2_PHYIDX 0
|
||||
#define CONFIG_ETHPRIME "MOTO ENET0"
|
||||
|
||||
#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
|
||||
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
|
||||
#undef CONFIG_ETHER_NONE /* define if ether on something else */
|
||||
#define CONFIG_ETHER_INDEX 2 /* which channel for ether */
|
||||
#if (CONFIG_ETHER_INDEX == 2)
|
||||
|
||||
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
|
||||
#undef CONFIG_ETHER_NONE /* define if ether on something else */
|
||||
#define CONFIG_ETHER_INDEX 2 /* which channel for ether */
|
||||
|
||||
#if (CONFIG_ETHER_INDEX == 2)
|
||||
/*
|
||||
* - Rx-CLK is CLK13
|
||||
* - Tx-CLK is CLK14
|
||||
* - Select bus for bd/buffers
|
||||
* - Full duplex
|
||||
*/
|
||||
#define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
|
||||
#define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
|
||||
#define CFG_CPMFCR_RAMTYPE 0
|
||||
#define CFG_FCC_PSMR (FCC_PSMR_FDE)
|
||||
#define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
|
||||
#define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
|
||||
#define CFG_CPMFCR_RAMTYPE 0
|
||||
#define CFG_FCC_PSMR (FCC_PSMR_FDE)
|
||||
#define FETH2_RST 0x01
|
||||
#elif (CONFIG_ETHER_INDEX == 3)
|
||||
#elif (CONFIG_ETHER_INDEX == 3)
|
||||
/* need more definitions here for FE3 */
|
||||
#define FETH3_RST 0x80
|
||||
#endif /* CONFIG_ETHER_INDEX */
|
||||
#endif /* CONFIG_ETHER_INDEX */
|
||||
|
||||
#define CONFIG_MII /* MII PHY management */
|
||||
#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
|
||||
#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
|
||||
|
||||
/*
|
||||
* GPIO pins used for bit-banged MII communications
|
||||
*/
|
||||
|
|
@ -256,9 +394,13 @@
|
|||
else iop->pdat &= ~0x00200000
|
||||
|
||||
#define MIIDELAY udelay(1)
|
||||
|
||||
#endif
|
||||
|
||||
/* Environment */
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
#ifndef CFG_RAMBOOT
|
||||
#if defined(CONFIG_RAM_AS_FLASH)
|
||||
#define CFG_ENV_IS_NOWHERE
|
||||
|
|
@ -267,83 +409,92 @@
|
|||
#else
|
||||
#define CFG_ENV_IS_IN_FLASH 1
|
||||
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
|
||||
#define CFG_ENV_SECT_SIZE 0x40000 /* 128K(one sector) for env */
|
||||
#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
|
||||
#endif
|
||||
#define CFG_ENV_SIZE 0x2000
|
||||
#else
|
||||
#define CFG_NO_FLASH 1 /* Flash is not usable now */
|
||||
#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||||
#define CFG_NO_FLASH 1 /* Flash is not usable now */
|
||||
#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||||
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
|
||||
#define CFG_ENV_SIZE 0x2000
|
||||
#endif
|
||||
|
||||
#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8560ads-003:eth0:off console=ttyS0,115200"
|
||||
/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/
|
||||
#define CONFIG_BOOTCOMMAND "bootm 0xff400000 0xff700000"
|
||||
#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
|
||||
#if defined(CONFIG_PCI)
|
||||
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \
|
||||
CFG_CMD_PING | CFG_CMD_I2C) & \
|
||||
~(CFG_CMD_ENV | \
|
||||
CFG_CMD_LOADS ))
|
||||
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
|
||||
| CFG_CMD_PCI \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_I2C) \
|
||||
& \
|
||||
~(CFG_CMD_ENV \
|
||||
| CFG_CMD_LOADS))
|
||||
#elif defined(CONFIG_TSEC_ENET)
|
||||
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | \
|
||||
CFG_CMD_I2C ) & \
|
||||
~(CFG_CMD_ENV))
|
||||
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_I2C) \
|
||||
& ~(CFG_CMD_ENV))
|
||||
#elif defined(CONFIG_ETHER_ON_FCC)
|
||||
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \
|
||||
CFG_CMD_PING | CFG_CMD_I2C) & \
|
||||
~(CFG_CMD_ENV))
|
||||
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
|
||||
| CFG_CMD_MII \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_I2C) \
|
||||
& ~(CFG_CMD_ENV))
|
||||
#endif
|
||||
#else
|
||||
#if defined(CONFIG_PCI)
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \
|
||||
CFG_CMD_PING | CFG_CMD_I2C)
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
|
||||
| CFG_CMD_PCI \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_I2C)
|
||||
#elif defined(CONFIG_TSEC_ENET)
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | \
|
||||
CFG_CMD_I2C)
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_I2C)
|
||||
#elif defined(CONFIG_ETHER_ON_FCC)
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \
|
||||
CFG_CMD_PING | CFG_CMD_I2C)
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
|
||||
| CFG_CMD_MII \
|
||||
| CFG_CMD_PING \
|
||||
| CFG_CMD_I2C)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "MPC8560ADS=> " /* Monitor Command Prompt */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_LOAD_ADDR 0x1000000 /* default load address */
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
|
||||
|
||||
/* Cache Configuration */
|
||||
#define CFG_DCACHE_SIZE 32768
|
||||
#define CFG_CACHELINE_SIZE 32
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
||||
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
|
||||
#endif
|
||||
|
||||
/*
|
||||
|
|
@ -352,26 +503,58 @@
|
|||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||||
#endif
|
||||
|
||||
/*Note: change below for your network setting!!! */
|
||||
/* The mac addresses for all ethernet interface */
|
||||
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
|
||||
#define CONFIG_ETHADDR 00:01:af:07:9b:8a
|
||||
#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
|
||||
#define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
|
||||
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
|
||||
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
|
||||
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
|
||||
#endif
|
||||
|
||||
#define CONFIG_SERVERIP 163.12.64.52
|
||||
#define CONFIG_IPADDR 10.82.0.105
|
||||
#define CONFIG_GATEWAYIP 10.82.1.254
|
||||
#define CONFIG_NETMASK 255.255.254.0
|
||||
#define CONFIG_HOSTNAME MPC8560ADS_PILOT_003
|
||||
#define CONFIG_ROOTPATH /home/r6aads/mpclinux/eldk-2.0.2/ppc_82xx
|
||||
#define CONFIG_BOOTFILE pImage
|
||||
#define CONFIG_IPADDR 192.168.1.253
|
||||
|
||||
#define CONFIG_HOSTNAME unknown
|
||||
#define CONFIG_ROOTPATH /nfsroot
|
||||
#define CONFIG_BOOTFILE your.uImage
|
||||
|
||||
#define CONFIG_SERVERIP 192.168.1.1
|
||||
#define CONFIG_GATEWAYIP 192.168.1.1
|
||||
#define CONFIG_NETMASK 255.255.255.0
|
||||
|
||||
#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
|
||||
|
||||
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
|
||||
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=400000\0" \
|
||||
"ramdiskfile=your.ramdisk.u-boot\0"
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"bootm $loadaddr"
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
|
|||
|
|
@ -1,4 +1,5 @@
|
|||
/*
|
||||
* Copyright 2004 Freescale Semiconductor.
|
||||
* Copyright(c) 2003 Motorola Inc.
|
||||
* Xianghua Xiao (x.xiao@motorola.com)
|
||||
*/
|
||||
|
|
@ -6,27 +7,22 @@
|
|||
#ifndef __MPC85xx_H__
|
||||
#define __MPC85xx_H__
|
||||
|
||||
#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
|
||||
#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
|
||||
|
||||
#if defined(CONFIG_E500)
|
||||
#include <e500.h>
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_DDR_ECC)
|
||||
void dma_init(void);
|
||||
uint dma_check(void);
|
||||
int dma_xfer(void *dest, uint count, void *src);
|
||||
#endif
|
||||
/*-----------------------------------------------------------------------
|
||||
* SCCR - System Clock Control Register 9-8
|
||||
/*
|
||||
* SCCR - System Clock Control Register, 9-8
|
||||
*/
|
||||
#define SCCR_CLPD 0x00000004 /* CPM Low Power Disable */
|
||||
#define SCCR_DFBRG_MSK 0x00000003 /* Division factor of BRGCLK Mask */
|
||||
#define SCCR_CLPD 0x00000004 /* CPM Low Power Disable */
|
||||
#define SCCR_DFBRG_MSK 0x00000003 /* Division by BRGCLK Mask */
|
||||
#define SCCR_DFBRG_SHIFT 0
|
||||
|
||||
#define SCCR_DFBRG00 0x00000000 /* BRGCLK division by 4 */
|
||||
#define SCCR_DFBRG01 0x00000001 /* BRGCLK division by 16 (normal op.)*/
|
||||
#define SCCR_DFBRG10 0x00000002 /* BRGCLK division by 64 */
|
||||
#define SCCR_DFBRG11 0x00000003 /* BRGCLK division by 256 */
|
||||
#define SCCR_DFBRG00 0x00000000 /* BRGCLK division by 4 */
|
||||
#define SCCR_DFBRG01 0x00000001 /* BRGCLK div by 16 (normal) */
|
||||
#define SCCR_DFBRG10 0x00000002 /* BRGCLK division by 64 */
|
||||
#define SCCR_DFBRG11 0x00000003 /* BRGCLK division by 256 */
|
||||
|
||||
#endif /* __MPC85xx_H__ */
|
||||
|
|
|
|||
|
|
@ -775,7 +775,8 @@ void board_init_r (gd_t *id, ulong dest_addr)
|
|||
#endif
|
||||
|
||||
#if defined(CFG_GT_6426x) || defined(CONFIG_PN62) || defined(CONFIG_PPCHAMELEONEVB) || \
|
||||
defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8560ADS) || defined(CONFIG_440_GX)
|
||||
defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8555CDS) || \
|
||||
defined(CONFIG_MPC8560ADS) || defined(CONFIG_440_GX)
|
||||
/* handle the 2nd ethernet address */
|
||||
|
||||
s = getenv ("eth1addr");
|
||||
|
|
@ -786,8 +787,9 @@ void board_init_r (gd_t *id, ulong dest_addr)
|
|||
s = (*e) ? e + 1 : e;
|
||||
}
|
||||
#endif
|
||||
#if defined(CFG_GT_6426x) || defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8560ADS) || \
|
||||
defined(CONFIG_440_GX)
|
||||
#if defined(CFG_GT_6426x) || defined(CONFIG_MPC8540ADS) || \
|
||||
defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8560ADS) || \
|
||||
defined(CONFIG_440_GX)
|
||||
/* handle the 3rd ethernet address */
|
||||
|
||||
s = getenv ("eth2addr");
|
||||
|
|
|
|||
12
net/eth.c
12
net/eth.c
|
|
@ -51,7 +51,7 @@ extern int rtl8139_initialize(bd_t*);
|
|||
extern int rtl8169_initialize(bd_t*);
|
||||
extern int scc_initialize(bd_t*);
|
||||
extern int skge_initialize(bd_t*);
|
||||
extern int tsec_initialize(bd_t*);
|
||||
extern int tsec_initialize(bd_t*, int);
|
||||
|
||||
static struct eth_device *eth_devices, *eth_current;
|
||||
|
||||
|
|
@ -147,8 +147,14 @@ int eth_initialize(bd_t *bis)
|
|||
#if defined(CONFIG_SK98)
|
||||
skge_initialize(bis);
|
||||
#endif
|
||||
#ifdef CONFIG_TSEC_ENET
|
||||
tsec_initialize(bis);
|
||||
#if defined(CONFIG_MPC85XX_TSEC1)
|
||||
tsec_initialize(bis, 0);
|
||||
#endif
|
||||
#if defined(CONFIG_MPC85XX_TSEC2)
|
||||
tsec_initialize(bis, 1);
|
||||
#endif
|
||||
#if defined(CONFIG_MPC85XX_FEC)
|
||||
tsec_initialize(bis, 2);
|
||||
#endif
|
||||
#if defined(CONFIG_AU1X00)
|
||||
au1x00_enet_initialize(bis);
|
||||
|
|
|
|||
Loading…
Reference in New Issue